View Financial HealthMold-Tek Packaging 배당 및 자사주 매입배당 기준 점검 3/6Mold-Tek Packaging 수익으로 충분히 충당되는 현재 수익률 0.68% 보유한 배당금 지급 회사입니다. 다음 지급일은 20th May, 2026 이며 배당락일은 다음과 같습니다. 24th April, 2026.핵심 정보0.7%배당 수익률n/a자사주 매입 수익률총 주주 수익률n/a미래 배당 수익률1.1%배당 성장률3.2%다음 배당 지급일20 May 26배당락일24 Apr 26주당 배당금n/a배당 성향10%최근 배당 및 자사주 매입 업데이트Declared Dividend • Apr 22Dividend of ₹2.00 announcedDividend of ₹2.00 is the same as last year. Ex-date: 24th April 2026 Payment date: 20th May 2026 Dividend yield will be 0.7%, which is lower than the industry average of 0.8%. Sustainability & Growth Dividend is covered by earnings (10% earnings payout ratio) but the company has no free cash flows available, indicating it may be using cash reserves or debt to pay the dividend. The dividend has increased by an average of 7.2% per year over the past 10 years. However, payments have been volatile during that time. EPS is expected to grow by 76% over the next 3 years, which should provide support to the dividend and adequate earnings cover.공지 • Sep 30Mold-Tek Packaging Limited Approves Interim Dividend for the Financial Year Ended March 31, 2025Mold-Tek Packaging Limited approved to confirm the payment of interim dividend paid during the year and to declare the final dividend maximum to the extent as recommended by Board that is, INR 2 (40%) per equity share of face value of INR 5 each for the financial year ended March 31, 2025.Upcoming Dividend • Sep 16Upcoming dividend of ₹2.00 per shareEligible shareholders must have bought the stock before 23 September 2025. Payment date: 30 October 2025. Payout ratio is a comfortable 22% but the company is not cash flow positive. Trailing yield: 0.5%. Lower than top quartile of Indian dividend payers (1.2%). Lower than average of industry peers (0.9%).Declared Dividend • Aug 31Dividend of ₹2.00 announcedShareholders will receive a dividend of ₹2.00. Ex-date: 23rd September 2025 Payment date: 30th October 2025 Dividend yield will be 0.5%, which is lower than the industry average of 0.8%. Sustainability & Growth Dividend is covered by earnings (22% earnings payout ratio) but the company has no free cash flows available, indicating it may be using cash reserves or debt to pay the dividend. The dividend has increased by an average of 10% per year over the past 10 years. However, payments have been volatile during that time. EPS is expected to grow by 71% over the next 3 years, which should provide support to the dividend and adequate earnings cover.공지 • Apr 25Mold-Tek Packaging Limited Declares Interim Dividend for the Financial Year 2024-25Mold-Tek Packaging Limited announced that the Board of Directors of the Company at its meeting held on April 25, 2025, have, inter-alia, declared an Interim Dividend of INR 2 /- (Rupees two only) per equity share (40 %) for the Financial Year 2024-25. Further as per letter dated April 22, 2025, the Record Date for the purpose of ascertaining the eligibility of members for payment of interim dividend shall be May 02, 2025.Upcoming Dividend • Sep 15Upcoming dividend of ₹1.00 per shareEligible shareholders must have bought the stock before 19 September 2024. Payment date: 26 October 2024. Payout ratio is a comfortable 15% but the company is not cash flow positive. Trailing yield: 0.4%. Lower than top quartile of Indian dividend payers (1.0%). Lower than average of industry peers (0.7%).모든 업데이트 보기Recent updates공지 • May 06Mold-Tek Packaging Limited to Report Q4, 2026 Results on May 11, 2026Mold-Tek Packaging Limited announced that they will report Q4, 2026 results on May 11, 2026Declared Dividend • Apr 22Dividend of ₹2.00 announcedDividend of ₹2.00 is the same as last year. Ex-date: 24th April 2026 Payment date: 20th May 2026 Dividend yield will be 0.7%, which is lower than the industry average of 0.8%. Sustainability & Growth Dividend is covered by earnings (10% earnings payout ratio) but the company has no free cash flows available, indicating it may be using cash reserves or debt to pay the dividend. The dividend has increased by an average of 7.2% per year over the past 10 years. However, payments have been volatile during that time. EPS is expected to grow by 76% over the next 3 years, which should provide support to the dividend and adequate earnings cover.Valuation Update With 7 Day Price Move • Apr 06Investor sentiment improves as stock rises 20%After last week's 20% share price gain to ₹567, the stock trades at a forward P/E ratio of 21x. Average forward P/E is 15x in the Packaging industry in India. Total loss to shareholders of 40% over the past three years. Simply Wall St's valuation model estimates the intrinsic value at ₹588 per share.분석 기사 • Feb 12Earnings Miss: Mold-Tek Packaging Limited Missed EPS By 14% And Analysts Are Revising Their ForecastsThe analysts might have been a bit too bullish on Mold-Tek Packaging Limited ( NSE:MOLDTKPAC ), given that the company...Price Target Changed • Feb 10Price target decreased by 8.9% to ₹809Down from ₹888, the current price target is an average from 9 analysts. New target price is 36% above last closing price of ₹595. Stock is up 5.7% over the past year. The company is forecast to post earnings per share of ₹21.75 for next year compared to ₹18.22 last year.공지 • Feb 04Mold-Tek Packaging Limited to Report Q3, 2026 Results on Feb 09, 2026Mold-Tek Packaging Limited announced that they will report Q3, 2026 results on Feb 09, 2026분석 기사 • Nov 26Is Mold-Tek Packaging (NSE:MOLDTKPAC) A Risky Investment?Legendary fund manager Li Lu (who Charlie Munger backed) once said, 'The biggest investment risk is not the volatility...Buy Or Sell Opportunity • Nov 18Now 24% overvaluedOver the last 90 days, the stock has fallen 14% to ₹682. The fair value is estimated to be ₹552, however this is not to be taken as a sell recommendation but rather should be used as a guide only. Revenue has grown by 4.8% over the last 3 years. Earnings per share has declined by 8.9%. For the next 3 years, revenue is forecast to grow by 13% per annum. Earnings are also forecast to grow by 20% per annum over the same time period.Reported Earnings • Oct 31Second quarter 2026 earnings released: EPS: ₹4.66 (vs ₹4.25 in 2Q 2025)Second quarter 2026 results: EPS: ₹4.66 (up from ₹4.25 in 2Q 2025). Revenue: ₹2.10b (up 9.8% from 2Q 2025). Net income: ₹154.8m (up 9.7% from 2Q 2025). Profit margin: 7.4% (in line with 2Q 2025). Revenue is forecast to grow 13% p.a. on average during the next 3 years, compared to a 13% growth forecast for the Packaging industry in India. Over the last 3 years on average, earnings per share has fallen by 9% per year and the company’s share price has also fallen by 9% per year.공지 • Oct 25Mold-Tek Packaging Limited to Report Q2, 2026 Results on Oct 29, 2025Mold-Tek Packaging Limited announced that they will report Q2, 2026 results on Oct 29, 2025공지 • Sep 30Mold-Tek Packaging Limited Approves Interim Dividend for the Financial Year Ended March 31, 2025Mold-Tek Packaging Limited approved to confirm the payment of interim dividend paid during the year and to declare the final dividend maximum to the extent as recommended by Board that is, INR 2 (40%) per equity share of face value of INR 5 each for the financial year ended March 31, 2025.분석 기사 • Sep 24Mold-Tek Packaging Limited's (NSE:MOLDTKPAC) CEO Will Probably Find It Hard To See A Huge Raise This YearKey Insights Mold-Tek Packaging to hold its Annual General Meeting on 30th of September Total pay for CEO Lakshmana...Upcoming Dividend • Sep 16Upcoming dividend of ₹2.00 per shareEligible shareholders must have bought the stock before 23 September 2025. Payment date: 30 October 2025. Payout ratio is a comfortable 22% but the company is not cash flow positive. Trailing yield: 0.5%. Lower than top quartile of Indian dividend payers (1.2%). Lower than average of industry peers (0.9%).Declared Dividend • Aug 31Dividend of ₹2.00 announcedShareholders will receive a dividend of ₹2.00. Ex-date: 23rd September 2025 Payment date: 30th October 2025 Dividend yield will be 0.5%, which is lower than the industry average of 0.8%. Sustainability & Growth Dividend is covered by earnings (22% earnings payout ratio) but the company has no free cash flows available, indicating it may be using cash reserves or debt to pay the dividend. The dividend has increased by an average of 10% per year over the past 10 years. However, payments have been volatile during that time. EPS is expected to grow by 71% over the next 3 years, which should provide support to the dividend and adequate earnings cover.공지 • Aug 29Mold-Tek Packaging Limited, Annual General Meeting, Sep 30, 2025Mold-Tek Packaging Limited, Annual General Meeting, Sep 30, 2025, at 10:00 Indian Standard Time.Buy Or Sell Opportunity • Aug 11Now 20% overvalued after recent price riseOver the last 90 days, the stock has risen 47% to ₹794. The fair value is estimated to be ₹661, however this is not to be taken as a sell recommendation but rather should be used as a guide only. Revenue has grown by 3.4% over the last 3 years. Earnings per share has declined by 9.2%. Revenue is forecast to grow by 36% in 2 years. Earnings are forecast to grow by 71% in the next 2 years.분석 기사 • Jul 31Mold-Tek Packaging Limited Beat Analyst Estimates: See What The Consensus Is Forecasting For This YearMold-Tek Packaging Limited ( NSE:MOLDTKPAC ) investors will be delighted, with the company turning in some strong...Price Target Changed • Jul 30Price target increased by 8.0% to ₹881Up from ₹816, the current price target is an average from 9 analysts. New target price is approximately in line with last closing price of ₹846. Stock is up 1.3% over the past year. The company is forecast to post earnings per share of ₹24.65 for next year compared to ₹18.22 last year.Reported Earnings • Jul 29First quarter 2026 earnings: EPS and revenues exceed analyst expectationsFirst quarter 2026 results: EPS: ₹6.74 (up from ₹4.97 in 1Q 2025). Revenue: ₹2.41b (up 23% from 1Q 2025). Net income: ₹224.0m (up 36% from 1Q 2025). Profit margin: 9.3% (up from 8.4% in 1Q 2025). The increase in margin was driven by higher revenue. Revenue exceeded analyst estimates by 9.2%. Earnings per share (EPS) also surpassed analyst estimates by 19%. Revenue is forecast to grow 12% p.a. on average during the next 3 years, compared to a 11% growth forecast for the Packaging industry in India. Over the last 3 years on average, earnings per share has fallen by 9% per year but the company’s share price has only fallen by 1% per year, which means it has not declined as severely as earnings.공지 • Jul 21Mold-Tek Packaging Limited to Report Q1, 2026 Results on Jul 28, 2025Mold-Tek Packaging Limited announced that they will report Q1, 2026 results on Jul 28, 2025분석 기사 • May 26Earnings Tell The Story For Mold-Tek Packaging Limited (NSE:MOLDTKPAC) As Its Stock Soars 25%Mold-Tek Packaging Limited ( NSE:MOLDTKPAC ) shareholders have had their patience rewarded with a 25% share price jump...분석 기사 • May 23Mold-Tek Packaging (NSE:MOLDTKPAC) Might Be Having Difficulty Using Its Capital EffectivelyIf you're not sure where to start when looking for the next multi-bagger, there are a few key trends you should keep an...공지 • May 13Mold-Tek Packaging Limited to Report Q4, 2025 Results on May 19, 2025Mold-Tek Packaging Limited announced that they will report Q4, 2025 results on May 19, 2025공지 • Apr 25Mold-Tek Packaging Limited Declares Interim Dividend for the Financial Year 2024-25Mold-Tek Packaging Limited announced that the Board of Directors of the Company at its meeting held on April 25, 2025, have, inter-alia, declared an Interim Dividend of INR 2 /- (Rupees two only) per equity share (40 %) for the Financial Year 2024-25. Further as per letter dated April 22, 2025, the Record Date for the purpose of ascertaining the eligibility of members for payment of interim dividend shall be May 02, 2025.분석 기사 • Feb 12Earnings Miss: Mold-Tek Packaging Limited Missed EPS By 5.5% And Analysts Are Revising Their ForecastsMold-Tek Packaging Limited ( NSE:MOLDTKPAC ) last week reported its latest quarterly results, which makes it a good...Price Target Changed • Feb 10Price target decreased by 9.5% to ₹924Down from ₹1,020, the current price target is an average from 10 analysts. New target price is 63% above last closing price of ₹567. Stock is down 35% over the past year. The company is forecast to post earnings per share of ₹18.45 for next year compared to ₹20.07 last year.Reported Earnings • Feb 08Third quarter 2025 earnings: EPS misses analyst expectationsThird quarter 2025 results: EPS: ₹4.11 (down from ₹4.28 in 3Q 2024). Revenue: ₹1.91b (up 15% from 3Q 2024). Net income: ₹136.4m (down 3.9% from 3Q 2024). Profit margin: 7.1% (down from 8.6% in 3Q 2024). The decrease in margin was driven by higher expenses. Revenue was in line with analyst estimates. Earnings per share (EPS) missed analyst estimates by 5.5%. Revenue is forecast to grow 13% p.a. on average during the next 3 years, compared to a 12% growth forecast for the Packaging industry in India. Over the last 3 years on average, earnings per share has fallen by 7% per year whereas the company’s share price has fallen by 9% per year.공지 • Feb 07Mold-Tek Packaging Limited Announces Appointment of Ms. Harshita Suresh Chandnani as Company Secretary and Compliance Officer (Key Managerial Personnel), March 11, 2025Mold-Tek Packaging Limited announced that at its board meeting held on February 7, 2025, appointment of Ms. Harshita Suresh Chandnani as Company Secretary and Compliance Officer (Key Managerial Personnel) of the Company with effect from the commencement of business hours on 11th March, 2025. Ms. Harshita Suresh Chandnani is a qualified Company Secretary and an Associate Member of the Institute of Company Secretaries of India (ICSI) with Membership No. A64959, She secured an All India Rank of 13 in the CS Foundation. She also holds a Post Graduate Diploma in Taxation Laws from Swami Ramanand § Teertha Marathwada University, Maharashtra. With over three and a half years of professional experience, she has expertise in Corporate Secretarial functions, specializing in areas such as Company Law, SEBI regulations, and related acts, rules, and regulations.분석 기사 • Feb 05Here's What's Concerning About Mold-Tek Packaging's (NSE:MOLDTKPAC) Returns On CapitalDid you know there are some financial metrics that can provide clues of a potential multi-bagger? Ideally, a business...공지 • Jan 31Mold-Tek Packaging Limited to Report Q3, 2025 Results on Feb 07, 2025Mold-Tek Packaging Limited announced that they will report Q3, 2025 results on Feb 07, 2025공지 • Dec 13Mold-Tek Packaging Limited Announces Resignation of Subhojeet Bhattacharjee as Company SecretaryMold-Tek Packaging Limited announced that Mr. Subhojeet Bhattacharjee, has tendered his resignation from the position of Company Secretary and Compliance Officer of the Company with effect from the close of business on the 13 day of December, 2024, due to his personal preoccupations and has confirmed that there are no other material reasons for his resignation.분석 기사 • Dec 11Some Shareholders Feeling Restless Over Mold-Tek Packaging Limited's (NSE:MOLDTKPAC) P/E RatioWith a price-to-earnings (or "P/E") ratio of 40.6x Mold-Tek Packaging Limited ( NSE:MOLDTKPAC ) may be sending bearish...분석 기사 • Nov 10Analysts Are Updating Their Mold-Tek Packaging Limited (NSE:MOLDTKPAC) Estimates After Its Second-Quarter ResultsLast week, you might have seen that Mold-Tek Packaging Limited ( NSE:MOLDTKPAC ) released its second-quarter result to...Reported Earnings • Nov 08Second quarter 2025 earnings released: EPS: ₹4.25 (vs ₹4.73 in 2Q 2024)Second quarter 2025 results: EPS: ₹4.25 (down from ₹4.73 in 2Q 2024). Revenue: ₹1.92b (up 13% from 2Q 2024). Net income: ₹141.1m (down 10.0% from 2Q 2024). Profit margin: 7.4% (down from 9.2% in 2Q 2024). The decrease in margin was driven by higher expenses. Revenue is forecast to grow 16% p.a. on average during the next 3 years, compared to a 12% growth forecast for the Packaging industry in India. Over the last 3 years on average, earnings per share has fallen by 5% per year whereas the company’s share price has fallen by 1% per year.분석 기사 • Nov 02Mold-Tek Packaging (NSE:MOLDTKPAC) Will Want To Turn Around Its Return TrendsWhat are the early trends we should look for to identify a stock that could multiply in value over the long term...공지 • Oct 31Mold-Tek Packaging Limited to Report Q2, 2025 Results on Nov 07, 2024Mold-Tek Packaging Limited announced that they will report Q2, 2025 results on Nov 07, 2024Upcoming Dividend • Sep 15Upcoming dividend of ₹1.00 per shareEligible shareholders must have bought the stock before 19 September 2024. Payment date: 26 October 2024. Payout ratio is a comfortable 15% but the company is not cash flow positive. Trailing yield: 0.4%. Lower than top quartile of Indian dividend payers (1.0%). Lower than average of industry peers (0.7%).Declared Dividend • Aug 31Dividend of ₹1.00 announcedShareholders will receive a dividend of ₹1.00. Ex-date: 19th September 2024 Payment date: 26th October 2024 Dividend yield will be 0.4%, which is lower than the industry average of 0.8%. Sustainability & Growth Dividend is covered by earnings (15% earnings payout ratio) but the company has no free cash flows available, indicating it may be using cash reserves or debt to pay the dividend. The dividend has increased by an average of 12% per year over the past 10 years. However, payments have been volatile during that time. EPS is expected to grow by 78% over the next 3 years, which should provide support to the dividend and adequate earnings cover.공지 • Aug 29Mold-Tek Packaging Limited, Annual General Meeting, Sep 26, 2024Mold-Tek Packaging Limited, Annual General Meeting, Sep 26, 2024, at 11:00 Indian Standard Time.Reported Earnings • Aug 03First quarter 2025 earnings: EPS and revenues miss analyst expectationsFirst quarter 2025 results: EPS: ₹4.97 (down from ₹5.65 in 1Q 2024). Revenue: ₹1.98b (up 6.3% from 1Q 2024). Net income: ₹165.3m (down 12% from 1Q 2024). Profit margin: 8.4% (down from 10% in 1Q 2024). The decrease in margin was driven by higher expenses. Revenue missed analyst estimates by 4.5%. Earnings per share (EPS) also missed analyst estimates by 24%. Revenue is forecast to grow 18% p.a. on average during the next 3 years, compared to a 12% growth forecast for the Packaging industry in India. Over the last 3 years on average, earnings per share has fallen by 2% per year but the company’s share price has increased by 15% per year, which means it is well ahead of earnings.공지 • Aug 02Mold-Tek Packaging Limited Proposes Final Dividend for the Financial Year 2023-24Mold-Tek Packaging Limited announced at the board meeting held on August 2, 2024, Recommended a final dividend of INR 1.00/- per equity hare for the financial year 2023-24 n Equity Share of face value of INR 5 each . The Board of Directors had earlier declared and paid an interim dividend of INR 2.00/- per equity share on face value of INR 5/- each at its meeting held on 3rd April 2024 . The total dividend for the aforesaid financial year thus amounts to INR 3.00/- per equity share on face value of INR 5/- each. The Final Dividend of INR 1.00/- per equity share is subject to the approval declaration of/by Members at the upcoming Annual General Meeting and the Record Date/Book Closure Period for the purpose of payment of the said Final Dividend for the financial year 2023-24 will be determined later.공지 • Jul 26Mold-Tek Packaging Limited to Report Q1, 2025 Results on Aug 02, 2024Mold-Tek Packaging Limited announced that they will report Q1, 2025 results on Aug 02, 2024Buy Or Sell Opportunity • Jul 26Now 21% overvaluedOver the last 90 days, the stock has fallen 6.0% to ₹797. The fair value is estimated to be ₹659, however this is not to be taken as a sell recommendation but rather should be used as a guide only. Revenue has grown by 10% over the last 3 years. Earnings per share has grown by 3.1%. For the next 3 years, revenue is forecast to grow by 16% per annum. Earnings are also forecast to grow by 22% per annum over the same time period.Buy Or Sell Opportunity • Jul 09Now 21% overvaluedOver the last 90 days, the stock has fallen 4.9% to ₹806. The fair value is estimated to be ₹664, however this is not to be taken as a sell recommendation but rather should be used as a guide only. Revenue has grown by 10% over the last 3 years. Earnings per share has grown by 3.1%. For the next 3 years, revenue is forecast to grow by 16% per annum. Earnings are also forecast to grow by 22% per annum over the same time period.분석 기사 • Jun 07Mold-Tek Packaging's (NSE:MOLDTKPAC) Weak Earnings May Only Reveal A Part Of The Whole PictureLast week's earnings announcement from Mold-Tek Packaging Limited ( NSE:MOLDTKPAC ) was disappointing to investors...Reported Earnings • Jun 04Full year 2024 earnings: EPS exceeds analyst expectations while revenues lag behindFull year 2024 results: EPS: ₹20.07 (down from ₹24.41 in FY 2023). Revenue: ₹7.00b (down 4.1% from FY 2023). Net income: ₹665.9m (down 17% from FY 2023). Profit margin: 9.5% (down from 11% in FY 2023). The decrease in margin was driven by lower revenue. Revenue missed analyst estimates by 1.5%. Earnings per share (EPS) exceeded analyst estimates by 2.1%. Revenue is forecast to grow 17% p.a. on average during the next 3 years, compared to a 11% growth forecast for the Packaging industry in India. Over the last 3 years on average, earnings per share has increased by 3% per year but the company’s share price has increased by 14% per year, which means it is tracking significantly ahead of earnings growth.공지 • May 25Mold-Tek Packaging Limited to Report Q4, 2024 Results on May 30, 2024Mold-Tek Packaging Limited announced that they will report Q4, 2024 results on May 30, 2024분석 기사 • Apr 09Mold-Tek Packaging (NSE:MOLDTKPAC) Will Want To Turn Around Its Return TrendsDid you know there are some financial metrics that can provide clues of a potential multi-bagger? Firstly, we'll want...Declared Dividend • Apr 05Dividend reduced to ₹2.00Dividend of ₹2.00 is 50% lower than last year. Ex-date: 12th April 2024 Payment date: 2nd May 2024 Dividend yield will be 0.5%, which is lower than the industry average of 0.8%. Sustainability & Growth Dividend is covered by earnings (9% earnings payout ratio) but the company has no free cash flows available, indicating it may be using cash reserves or debt to pay the dividend. The dividend has increased by an average of 20% per year over the past 10 years. However, payments have been volatile during that time. EPS is expected to grow by 91% over the next 3 years, which should provide support to the dividend and adequate earnings cover.공지 • Apr 03Mold-Tek Packaging Limited Declares Interim Equity Dividend for the Financial Year 2023-24, Payable on or Before 2 May, 2024Mold-Tek Packaging Limited announced that at the Board of Directors meeting held on 3 April, 2024, have declared an Interim Equity Dividend for the Financial Year 2023-24 at the rate of 40%, that is INR 2.00 per equity share on face value of INR 5.00 per equity share. As intimated vide letter dated 29 March, 2024, the record date for reckoning the list of equity shareholders who will be entitled to receive the said interim equity dividend shall be 12 April, 2024. The interim dividend will be paid to such shareholders on or before 2 May, 2024.분석 기사 • Feb 14Mold-Tek Packaging Limited Just Missed Earnings - But Analysts Have Updated Their ModelsAs you might know, Mold-Tek Packaging Limited ( NSE:MOLDTKPAC ) last week released its latest quarterly, and things did...Reported Earnings • Feb 10Third quarter 2024 earnings: Revenues miss analyst expectationsThird quarter 2024 results: Revenue: ₹1.66b (up 6.9% from 3Q 2023). Net income: ₹142.0m (down 13% from 3Q 2023). Profit margin: 8.6% (down from 11% in 3Q 2023). The decrease in margin was driven by higher expenses. Revenue missed analyst estimates by 3.4%. Revenue is forecast to grow 21% p.a. on average during the next 3 years, compared to a 15% growth forecast for the Packaging industry in India. Over the last 3 years on average, earnings per share has increased by 12% per year but the company’s share price has increased by 30% per year, which means it is tracking significantly ahead of earnings growth.공지 • Feb 03Mold-Tek Packaging Limited to Report Q3, 2024 Results on Feb 09, 2024Mold-Tek Packaging Limited announced that they will report Q3, 2024 results on Feb 09, 2024Reported Earnings • Nov 09Second quarter 2024 earnings: EPS and revenues miss analyst expectationsSecond quarter 2024 results: EPS: ₹4.73 (down from ₹5.86 in 2Q 2023). Revenue: ₹1.70b (down 6.7% from 2Q 2023). Net income: ₹156.9m (down 19% from 2Q 2023). Profit margin: 9.2% (down from 11% in 2Q 2023). The decrease in margin was driven by lower revenue. Revenue missed analyst estimates by 8.6%. Earnings per share (EPS) also missed analyst estimates by 17%. Revenue is forecast to grow 20% p.a. on average during the next 3 years, compared to a 13% growth forecast for the Packaging industry in India. Over the last 3 years on average, earnings per share has increased by 16% per year but the company’s share price has increased by 48% per year, which means it is tracking significantly ahead of earnings growth.공지 • Oct 31Mold-Tek Packaging Limited to Report Q2, 2024 Results on Nov 07, 2023Mold-Tek Packaging Limited announced that they will report Q2, 2024 results on Nov 07, 2023공지 • Sep 27+ 1 more updateMold-Tek Packaging Limited Appoints Ponnuswamy Ramnath as Independent Non-Executive Director of the CompanyMold-Tek Packaging Limited at its annual general meeting held on September 26, 2023,the company appointed Mr. Ponnuswamy Ramnath, Additional Director (Category: Non-Executive, Independent), as an Independent Non-Executive Director of the company.Upcoming Dividend • Sep 11Upcoming dividend of ₹2.00 per share at 0.6% yieldEligible shareholders must have bought the stock before 18 September 2023. Payment date: 26 October 2023. Payout ratio is a comfortable 25% but the company is paying out more than the cash it is generating. Trailing yield: 0.6%. Lower than top quartile of Indian dividend payers (1.3%). Lower than average of industry peers (0.9%).공지 • Sep 03Mold-Tek Packaging Limited Proposes Final Dividend for the Financial Year Ended March 31, 2023Mold-Tek Packaging Limited at the AGM to be held on September 26, 2023, the shareholders proposed to declare the final dividend maximum to the extend as recommended by Board i.e., INR 2.00 (40%) per equity share of face value of INR 5.00 each for the financial year ended March 31, 2023.분석 기사 • Sep 01Mold-Tek Packaging (NSE:MOLDTKPAC) Is Paying Out A Dividend Of ₹2.00The board of Mold-Tek Packaging Limited ( NSE:MOLDTKPAC ) has announced that it will pay a dividend on the 26th of...공지 • Aug 30Mold-Tek Packaging Limited, Annual General Meeting, Sep 26, 2023Mold-Tek Packaging Limited, Annual General Meeting, Sep 26, 2023, at 11:00 Indian Standard Time.공지 • Aug 10Mold-Tek Packaging Limited Appoints Ponnuswamy Ramnath as Additional DirectorThe Board of Directors of the Mold-Tek Packaging Limited based on the recommendation of the Nomination and Remuneration Committee approved theappointment of Mr. Ponnuswamy Ramnath as an Additional Director (Category: Non-Executive, Independent) on the Board of the Company with effect from 17th August, 2023. Mr. Ponnuswamy Ramnath has extensive experience in sales and marketing, business development, strategy, operations and has managed businesses across diverse industries such as petrochemicals, building products, chemicals/specialty chemicals, paper and packaging board, base metals (copper) & precious metals across MNCs and Indian Corporates. Over a career spanning 30 + years, he has built-up market for new products from scratch, acquired businesses, established new applications, set up new projects and managed businesses with turnover up to 21,000 Crores (USD 3.5 Billion) with highprofitability and ROCE and has worked/was associated with esteemed organizations like Reliance Industries Limited, Vedanta Limited, J.K. Paper Limited, Jubilant Life Sciences Ltd., Praxair India Limited, Bakelite Hylam Limited etc. Currently he is acting as the Managing Partner - CEO Practice- Metals, Mining and Chemicals of Gladwin International & Company.분석 기사 • Aug 06Analyst Forecasts Just Became More Bearish On Mold-Tek Packaging Limited (NSE:MOLDTKPAC)Today is shaping up negative for Mold-Tek Packaging Limited ( NSE:MOLDTKPAC ) shareholders, with the analysts...Reported Earnings • Aug 05First quarter 2024 earnings: EPS and revenues miss analyst expectationsFirst quarter 2024 results: EPS: ₹5.65 (down from ₹6.27 in 1Q 2023). Revenue: ₹1.87b (down 4.4% from 1Q 2023). Net income: ₹187.3m (down 8.9% from 1Q 2023). Profit margin: 10.0% (in line with 1Q 2023). Revenue missed analyst estimates by 8.8%. Earnings per share (EPS) also missed analyst estimates by 14%. Revenue is forecast to grow 21% p.a. on average during the next 3 years, compared to a 13% growth forecast for the Packaging industry in India. Over the last 3 years on average, earnings per share has increased by 22% per year but the company’s share price has increased by 54% per year, which means it is tracking significantly ahead of earnings growth.공지 • Jul 29Mold-Tek Packaging Limited to Report Q1, 2024 Results on Aug 04, 2023Mold-Tek Packaging Limited announced that they will report Q1, 2024 results on Aug 04, 2023Reported Earnings • May 05Full year 2023 earnings: EPS and revenues miss analyst expectationsFull year 2023 results: EPS: ₹24.27 (up from ₹22.12 in FY 2022). Revenue: ₹7.31b (up 16% from FY 2022). Net income: ₹804.3m (up 26% from FY 2022). Profit margin: 11% (in line with FY 2022). Revenue missed analyst estimates by 2.4%. Earnings per share (EPS) also missed analyst estimates by 1.1%. Revenue is forecast to grow 20% p.a. on average during the next 3 years, compared to a 13% growth forecast for the Packaging industry in India. Over the last 3 years on average, earnings per share has increased by 26% per year but the company’s share price has increased by 78% per year, which means it is tracking significantly ahead of earnings growth.공지 • May 04Mold-Tek Packaging Limited Recommends Final Dividend for the Financial Year 2022-23The board of directors of Mold-Tek Packaging Limited meeting held on May 3, 2023, recommended a final dividend of INR 2.00 per equity share for the financial year 2022-23 on equity shares of face value of INR 5 each. The Board of Directors had earlier declared and paid an interim dividend of INR 4.00 per equity share on face value of INR 5 each at its meeting held on 12th April, 2023. The total dividend for the aforesaid financial year thus amounts to INR 6.00 per equity share on face value of INR 5 each. The Final Dividend of INR 2.00 per equity share is subject to the approval/declaration of/by Members at the upcoming Annual General Meeting and the Record Date/Book Closure Period for the purpose of payment of the said Final Dividend for the financial year 2022-23 will be determined later.분석 기사 • Apr 15Mold-Tek Packaging (NSE:MOLDTKPAC) Is Reducing Its Dividend To ₹4.00Mold-Tek Packaging Limited ( NSE:MOLDTKPAC ) has announced it will be reducing its dividend payable on the 11th of May...Board Change • Mar 14Insufficient new directorsNo new directors have joined the board in the last 3 years. The company's board is composed of: No new directors. 5 experienced directors. 4 highly experienced directors. Non-Executive Independent Woman Director Madhuri Venkata Viswanadham was the last director to join the board, commencing their role in 2020. The following issues are considered to be risks according to the Simply Wall St Risk Model: Insufficient board refreshment.Price Target Changed • Feb 24Price target increased by 12% to ₹1,094Up from ₹979, the current price target is an average from 5 analysts. New target price is 14% above last closing price of ₹956. Stock is up 42% over the past year. The company is forecast to post earnings per share of ₹24.78 for next year compared to ₹22.12 last year.Reported Earnings • Feb 07Third quarter 2023 earnings released: EPS: ₹4.92 (vs ₹5.80 in 3Q 2022)Third quarter 2023 results: EPS: ₹4.92 (down from ₹5.80 in 3Q 2022). Revenue: ₹1.55b (down 3.1% from 3Q 2022). Net income: ₹163.1m (down 2.1% from 3Q 2022). Profit margin: 11% (in line with 3Q 2022). Revenue is forecast to grow 20% p.a. on average during the next 3 years, compared to a 12% growth forecast for the Packaging industry in India. Over the last 3 years on average, earnings per share has increased by 28% per year but the company’s share price has increased by 53% per year, which means it is tracking significantly ahead of earnings growth.Price Target Changed • Nov 16Price target increased to ₹919Up from ₹847, the current price target is an average from 7 analysts. New target price is 8.4% above last closing price of ₹847. Stock is up 18% over the past year. The company is forecast to post earnings per share of ₹27.19 for next year compared to ₹22.12 last year.분석 기사 • Sep 24It Looks Like The CEO Of Mold-Tek Packaging Limited (NSE:MOLDTKPAC) May Be Underpaid Compared To PeersThe impressive results at Mold-Tek Packaging Limited ( NSE:MOLDTKPAC ) recently will be great news for shareholders. At...Upcoming Dividend • Sep 15Upcoming dividend of ₹2.00 per shareEligible shareholders must have bought the stock before 22 September 2022. Payment date: 30 October 2022. Payout ratio is a comfortable 36% but the company is not cash flow positive. Trailing yield: 0.8%. Lower than top quartile of Indian dividend payers (1.5%). Lower than average of industry peers (1.1%).Reported Earnings • Sep 06Full year 2022 earnings released: EPS: ₹22.12 (vs ₹16.82 in FY 2021)Full year 2022 results: EPS: ₹22.12 (up from ₹16.82 in FY 2021). Revenue: ₹6.31b (up 32% from FY 2021). Net income: ₹636.5m (up 33% from FY 2021). Profit margin: 10% (in line with FY 2021). Revenue is forecast to grow 18% p.a. on average during the next 2 years, compared to a 12% growth forecast for the Packaging industry in India. Over the last 3 years on average, earnings per share has increased by 26% per year but the company’s share price has increased by 47% per year, which means it is tracking significantly ahead of earnings growth.분석 기사 • Sep 05Mold-Tek Packaging's (NSE:MOLDTKPAC) Dividend Is Being Reduced To ₹2.00Mold-Tek Packaging Limited ( NSE:MOLDTKPAC ) is reducing its dividend from last year's comparable payment to ₹2.00 on...분석 기사 • Aug 09Is Mold-Tek Packaging (NSE:MOLDTKPAC) A Risky Investment?Howard Marks put it nicely when he said that, rather than worrying about share price volatility, 'The possibility of...공지 • Jul 15+ 1 more updateMold-Tek Packaging Limited to Report Q3, 2023 Results on Feb 14, 2023Mold-Tek Packaging Limited announced that they will report Q3, 2023 results on Feb 14, 2023분석 기사 • May 17Mold-Tek Packaging (NSE:MOLDTKPAC) Strong Profits May Be Masking Some Underlying IssuesMold-Tek Packaging Limited's ( NSE:MOLDTKPAC ) healthy profit numbers didn't contain any surprises for investors. We...Reported Earnings • May 11Full year 2022 earnings: EPS misses analyst expectationsFull year 2022 results: EPS: ₹22.12 (up from ₹16.82 in FY 2021). Revenue: ₹6.33b (up 32% from FY 2021). Net income: ₹636.5m (up 33% from FY 2021). Profit margin: 10% (in line with FY 2021). Revenue was in line with analyst estimates. Earnings per share (EPS) missed analyst estimates by 6.8%. Over the next year, revenue is forecast to grow 15%, compared to a 11% growth forecast for the industry in India. Over the last 3 years on average, earnings per share has increased by 26% per year but the company’s share price has increased by 43% per year, which means it is tracking significantly ahead of earnings growth.분석 기사 • May 11Is Now The Time To Put Mold-Tek Packaging (NSE:MOLDTKPAC) On Your Watchlist?It's only natural that many investors, especially those who are new to the game, prefer to buy shares in 'sexy' stocks...Price Target Changed • Apr 27Price target increased to ₹775Up from ₹709, the current price target is an average from 8 analysts. New target price is approximately in line with last closing price of ₹804. Stock is up 87% over the past year. The company is forecast to post earnings per share of ₹22.69 for next year compared to ₹16.82 last year.Price Target Changed • Feb 02Price target increased to ₹771Up from ₹709, the current price target is an average from 7 analysts. New target price is approximately in line with last closing price of ₹760. Stock is up 121% over the past year. The company is forecast to post earnings per share of ₹23.40 for next year compared to ₹16.82 last year.Reported Earnings • Jan 28Third quarter 2022 earnings: EPS exceeds analyst expectations while revenues lag behindThird quarter 2022 results: EPS: ₹5.80 (up from ₹5.26 in 3Q 2021). Revenue: ₹1.60b (up 20% from 3Q 2021). Net income: ₹166.6m (up 12% from 3Q 2021). Profit margin: 10% (in line with 3Q 2021). Revenue missed analyst estimates by 2.7%. Earnings per share (EPS) exceeded analyst estimates by 1.6%. Over the next year, revenue is forecast to grow 12%, compared to a 8.1% growth forecast for the industry in India. Over the last 3 years on average, earnings per share has increased by 25% per year but the company’s share price has increased by 47% per year, which means it is tracking significantly ahead of earnings growth.Price Target Changed • Nov 13Price target increased to ₹686Up from ₹610, the current price target is an average from 7 analysts. New target price is approximately in line with last closing price of ₹717. Stock is up 142% over the past year. The company is forecast to post earnings per share of ₹23.15 for next year compared to ₹16.82 last year.Reported Earnings • Nov 05Second quarter 2022 earnings released: EPS ₹6.23 (vs ₹4.85 in 2Q 2021)The company reported a solid second quarter result with improved earnings and revenues, although profit margins were flat. Second quarter 2022 results: Revenue: ₹1.60b (up 34% from 2Q 2021). Net income: ₹175.9m (up 31% from 2Q 2021). Profit margin: 11% (in line with 2Q 2021). Over the last 3 years on average, earnings per share has increased by 22% per year but the company’s share price has increased by 41% per year, which means it is tracking significantly ahead of earnings growth.분석 기사 • Oct 08I Ran A Stock Scan For Earnings Growth And Mold-Tek Packaging (NSE:MOLDTKPAC) Passed With EaseSome have more dollars than sense, they say, so even companies that have no revenue, no profit, and a record of falling...Valuation Update With 7 Day Price Move • Oct 07Investor sentiment improved over the past weekAfter last week's 15% share price gain to ₹673, the stock trades at a forward P/E ratio of 28x. Average forward P/E is 20x in the Packaging industry in India. Total returns to shareholders of 177% over the past three years. Simply Wall St's valuation model estimates the intrinsic value at ₹450 per share.분석 기사 • Sep 23We Take A Look At Why Mold-Tek Packaging Limited's (NSE:MOLDTKPAC) CEO Compensation Is Well EarnedThe performance at Mold-Tek Packaging Limited ( NSE:MOLDTKPAC ) has been quite strong recently and CEO Lakshmana...분석 기사 • Sep 14Here's What Mold-Tek Packaging's (NSE:MOLDTKPAC) Strong Returns On Capital MeanIf we want to find a potential multi-bagger, often there are underlying trends that can provide clues. Firstly, we'd...Valuation Update With 7 Day Price Move • Sep 14Investor sentiment improved over the past weekAfter last week's 20% share price gain to ₹578, the stock trades at a forward P/E ratio of 22x. Average forward P/E is 20x in the Packaging industry in India. Total returns to shareholders of 89% over the past three years. Simply Wall St's valuation model estimates the intrinsic value at ₹448 per share.Recent Insider Transactions • Aug 14Insider recently sold ₹78m worth of stockOn the 6th of August, Adhivishnu Mythri sold around 150k shares on-market at roughly ₹517 per share. This was the largest sale by an insider in the last 3 months. Insiders have been net sellers, collectively disposing of ₹163m more than they bought in the last 12 months.Price Target Changed • Aug 01Price target increased to ₹569Up from ₹526, the current price target is an average from 5 analysts. New target price is 7.9% above last closing price of ₹527. Stock is up 130% over the past year.Reported Earnings • Jul 29First quarter 2022 earnings released: EPS ₹4.32 (vs ₹0.55 in 1Q 2021)The company reported a strong first quarter result with improved earnings, revenues and profit margins. First quarter 2022 results: Revenue: ₹1.34b (up 105% from 1Q 2021). Net income: ₹120.8m (up ₹105.7m from 1Q 2021). Profit margin: 9.0% (up from 2.3% in 1Q 2021). The increase in margin was driven by higher revenue. Over the last 3 years on average, earnings per share has increased by 18% per year whereas the company’s share price has increased by 20% per year.Recent Insider Transactions • Jul 07Deputy MD & Executive Director recently sold ₹1.2m worth of stockOn the 29th of June, Pattabhi Rao sold around 3k shares on-market at roughly ₹482 per share. In the last 3 months, there was an even bigger sale from another insider worth ₹4.8m. Insiders have been net sellers, collectively disposing of ₹7.0m more than they bought in the last 12 months.Recent Insider Transactions • Jun 13Insider recently sold ₹4.8m worth of stockOn the 10th of June, Adivishnu Sundeep sold around 9k shares on-market at roughly ₹502 per share. This was the largest sale by an insider in the last 3 months. This was the only on-market transaction from insiders over the last 12 months.분석 기사 • Jun 07Should You Be Adding Mold-Tek Packaging (NSE:MOLDTKPAC) To Your Watchlist Today?Like a puppy chasing its tail, some new investors often chase 'the next big thing', even if that means buying 'story...Reported Earnings • May 28Full year 2021 earnings released: EPS ₹16.82 (vs ₹13.51 in FY 2020)The company reported a strong full year result with improved earnings, revenues and profit margins. Full year 2021 results: Revenue: ₹4.80b (up 9.5% from FY 2020). Net income: ₹479.6m (up 28% from FY 2020). Profit margin: 10.0% (up from 8.5% in FY 2020). The increase in margin was driven by higher revenue. Over the last 3 years on average, earnings per share has increased by 12% per year whereas the company’s share price has increased by 15% per year.지급의 안정성과 성장배당 데이터 가져오는 중안정적인 배당: MOLDTKPAC 의 배당금 지급은 지난 10 년 동안 휘발성이었습니다.배당금 증가: MOLDTKPAC 의 배당금 지급은 지난 10 년 동안 증가했습니다.배당 수익률 vs 시장Mold-Tek Packaging 배당 수익률 vs 시장MOLDTKPAC의 배당 수익률은 시장과 어떻게 비교되나요?구분배당 수익률회사 (MOLDTKPAC)0.7%시장 하위 25% (IN)0.3%시장 상위 25% (IN)1.4%업계 평균 (Packaging)1.0%분석가 예측 (MOLDTKPAC) (최대 3년)1.1%주목할만한 배당금: MOLDTKPAC 의 배당금( 0.68% )은 Indian 시장에서 배당금 지급자의 하위 25%( 0.29% )보다 높습니다.고배당: MOLDTKPAC 의 배당금( 0.68% )은 Indian 시장에서 배당금 지급자의 상위 25%( 1.45% )와 비교해 낮습니다.주주 대상 이익 배당수익 보장: 낮은 배당금 지급 비율 (9.7%)로 인해 MOLDTKPAC의 배당금 지급은 수익으로 충분히 충당됩니다.주주 현금 배당현금 흐름 범위: MOLDTKPAC 배당금을 지급하고 있지만 회사에는 잉여현금흐름이 없습니다.높은 배당을 제공하는 우량 기업 찾기7D1Y7D1Y7D1YIN 시장에서 배당이 강한 기업.View Management기업 분석 및 재무 데이터 상태데이터최종 업데이트 (UTC 시간)기업 분석2026/05/08 13:42종가2026/05/08 00:00수익2025/12/31연간 수익2025/03/31데이터 소스당사의 기업 분석에 사용되는 데이터는 S&P Global Market Intelligence LLC에서 제공됩니다. 아래 데이터는 이 보고서를 생성하기 위해 분석 모델에서 사용됩니다. 데이터는 정규화되므로 소스가 제공된 후 지연이 발생할 수 있습니다.패키지데이터기간미국 소스 예시 *기업 재무제표10년손익계산서현금흐름표대차대조표SEC 양식 10-KSEC 양식 10-Q분석가 컨센서스 추정치+3년재무 예측분석가 목표주가분석가 리서치 보고서Blue Matrix시장 가격30년주가배당, 분할 및 기타 조치ICE 시장 데이터SEC 양식 S-1지분 구조10년주요 주주내부자 거래SEC 양식 4SEC 양식 13D경영진10년리더십 팀이사회SEC 양식 10-KSEC 양식 DEF 14A주요 개발10년회사 공시SEC 양식 8-K* 미국 증권에 대한 예시이며, 비(非)미국 증권에는 해당 국가의 규제 서식 및 자료원을 사용합니다.별도로 명시되지 않는 한 모든 재무 데이터는 연간 기간을 기준으로 하지만 분기별로 업데이트됩니다. 이를 TTM(최근 12개월) 또는 LTM(지난 12개월) 데이터라고 합니다. 자세히 알아보기.분석 모델 및 스노우플레이크이 보고서를 생성하는 데 사용된 분석 모델에 대한 자세한 내용은 당사의 Github 페이지에서 확인하실 수 있습니다. 또한 보고서 활용 방법에 대한 가이드와 YouTube 튜토리얼도 제공합니다.Simply Wall St 분석 모델을 설계하고 구축한 세계적 수준의 팀에 대해 알아보세요.산업 및 섹터 지표산업 및 섹터 지표는 Simply Wall St가 6시간마다 계산하며, 프로세스에 대한 자세한 내용은 Github에서 확인할 수 있습니다.분석가 소스Mold-Tek Packaging Limited는 21명의 분석가가 다루고 있습니다. 이 중 9명의 분석가가 우리 보고서에 입력 데이터로 사용되는 매출 또는 수익 추정치를 제출했습니다. 분석가의 제출 자료는 하루 종일 업데이트됩니다.분석가기관Akhil Parekh360 ONE Capital Market Private LimitedPurva Zanwar360 ONE Capital Market Private Limitednull null360 ONE Capital Market Private Limited18명의 분석가 더 보기
Declared Dividend • Apr 22Dividend of ₹2.00 announcedDividend of ₹2.00 is the same as last year. Ex-date: 24th April 2026 Payment date: 20th May 2026 Dividend yield will be 0.7%, which is lower than the industry average of 0.8%. Sustainability & Growth Dividend is covered by earnings (10% earnings payout ratio) but the company has no free cash flows available, indicating it may be using cash reserves or debt to pay the dividend. The dividend has increased by an average of 7.2% per year over the past 10 years. However, payments have been volatile during that time. EPS is expected to grow by 76% over the next 3 years, which should provide support to the dividend and adequate earnings cover.
공지 • Sep 30Mold-Tek Packaging Limited Approves Interim Dividend for the Financial Year Ended March 31, 2025Mold-Tek Packaging Limited approved to confirm the payment of interim dividend paid during the year and to declare the final dividend maximum to the extent as recommended by Board that is, INR 2 (40%) per equity share of face value of INR 5 each for the financial year ended March 31, 2025.
Upcoming Dividend • Sep 16Upcoming dividend of ₹2.00 per shareEligible shareholders must have bought the stock before 23 September 2025. Payment date: 30 October 2025. Payout ratio is a comfortable 22% but the company is not cash flow positive. Trailing yield: 0.5%. Lower than top quartile of Indian dividend payers (1.2%). Lower than average of industry peers (0.9%).
Declared Dividend • Aug 31Dividend of ₹2.00 announcedShareholders will receive a dividend of ₹2.00. Ex-date: 23rd September 2025 Payment date: 30th October 2025 Dividend yield will be 0.5%, which is lower than the industry average of 0.8%. Sustainability & Growth Dividend is covered by earnings (22% earnings payout ratio) but the company has no free cash flows available, indicating it may be using cash reserves or debt to pay the dividend. The dividend has increased by an average of 10% per year over the past 10 years. However, payments have been volatile during that time. EPS is expected to grow by 71% over the next 3 years, which should provide support to the dividend and adequate earnings cover.
공지 • Apr 25Mold-Tek Packaging Limited Declares Interim Dividend for the Financial Year 2024-25Mold-Tek Packaging Limited announced that the Board of Directors of the Company at its meeting held on April 25, 2025, have, inter-alia, declared an Interim Dividend of INR 2 /- (Rupees two only) per equity share (40 %) for the Financial Year 2024-25. Further as per letter dated April 22, 2025, the Record Date for the purpose of ascertaining the eligibility of members for payment of interim dividend shall be May 02, 2025.
Upcoming Dividend • Sep 15Upcoming dividend of ₹1.00 per shareEligible shareholders must have bought the stock before 19 September 2024. Payment date: 26 October 2024. Payout ratio is a comfortable 15% but the company is not cash flow positive. Trailing yield: 0.4%. Lower than top quartile of Indian dividend payers (1.0%). Lower than average of industry peers (0.7%).
공지 • May 06Mold-Tek Packaging Limited to Report Q4, 2026 Results on May 11, 2026Mold-Tek Packaging Limited announced that they will report Q4, 2026 results on May 11, 2026
Declared Dividend • Apr 22Dividend of ₹2.00 announcedDividend of ₹2.00 is the same as last year. Ex-date: 24th April 2026 Payment date: 20th May 2026 Dividend yield will be 0.7%, which is lower than the industry average of 0.8%. Sustainability & Growth Dividend is covered by earnings (10% earnings payout ratio) but the company has no free cash flows available, indicating it may be using cash reserves or debt to pay the dividend. The dividend has increased by an average of 7.2% per year over the past 10 years. However, payments have been volatile during that time. EPS is expected to grow by 76% over the next 3 years, which should provide support to the dividend and adequate earnings cover.
Valuation Update With 7 Day Price Move • Apr 06Investor sentiment improves as stock rises 20%After last week's 20% share price gain to ₹567, the stock trades at a forward P/E ratio of 21x. Average forward P/E is 15x in the Packaging industry in India. Total loss to shareholders of 40% over the past three years. Simply Wall St's valuation model estimates the intrinsic value at ₹588 per share.
분석 기사 • Feb 12Earnings Miss: Mold-Tek Packaging Limited Missed EPS By 14% And Analysts Are Revising Their ForecastsThe analysts might have been a bit too bullish on Mold-Tek Packaging Limited ( NSE:MOLDTKPAC ), given that the company...
Price Target Changed • Feb 10Price target decreased by 8.9% to ₹809Down from ₹888, the current price target is an average from 9 analysts. New target price is 36% above last closing price of ₹595. Stock is up 5.7% over the past year. The company is forecast to post earnings per share of ₹21.75 for next year compared to ₹18.22 last year.
공지 • Feb 04Mold-Tek Packaging Limited to Report Q3, 2026 Results on Feb 09, 2026Mold-Tek Packaging Limited announced that they will report Q3, 2026 results on Feb 09, 2026
분석 기사 • Nov 26Is Mold-Tek Packaging (NSE:MOLDTKPAC) A Risky Investment?Legendary fund manager Li Lu (who Charlie Munger backed) once said, 'The biggest investment risk is not the volatility...
Buy Or Sell Opportunity • Nov 18Now 24% overvaluedOver the last 90 days, the stock has fallen 14% to ₹682. The fair value is estimated to be ₹552, however this is not to be taken as a sell recommendation but rather should be used as a guide only. Revenue has grown by 4.8% over the last 3 years. Earnings per share has declined by 8.9%. For the next 3 years, revenue is forecast to grow by 13% per annum. Earnings are also forecast to grow by 20% per annum over the same time period.
Reported Earnings • Oct 31Second quarter 2026 earnings released: EPS: ₹4.66 (vs ₹4.25 in 2Q 2025)Second quarter 2026 results: EPS: ₹4.66 (up from ₹4.25 in 2Q 2025). Revenue: ₹2.10b (up 9.8% from 2Q 2025). Net income: ₹154.8m (up 9.7% from 2Q 2025). Profit margin: 7.4% (in line with 2Q 2025). Revenue is forecast to grow 13% p.a. on average during the next 3 years, compared to a 13% growth forecast for the Packaging industry in India. Over the last 3 years on average, earnings per share has fallen by 9% per year and the company’s share price has also fallen by 9% per year.
공지 • Oct 25Mold-Tek Packaging Limited to Report Q2, 2026 Results on Oct 29, 2025Mold-Tek Packaging Limited announced that they will report Q2, 2026 results on Oct 29, 2025
공지 • Sep 30Mold-Tek Packaging Limited Approves Interim Dividend for the Financial Year Ended March 31, 2025Mold-Tek Packaging Limited approved to confirm the payment of interim dividend paid during the year and to declare the final dividend maximum to the extent as recommended by Board that is, INR 2 (40%) per equity share of face value of INR 5 each for the financial year ended March 31, 2025.
분석 기사 • Sep 24Mold-Tek Packaging Limited's (NSE:MOLDTKPAC) CEO Will Probably Find It Hard To See A Huge Raise This YearKey Insights Mold-Tek Packaging to hold its Annual General Meeting on 30th of September Total pay for CEO Lakshmana...
Upcoming Dividend • Sep 16Upcoming dividend of ₹2.00 per shareEligible shareholders must have bought the stock before 23 September 2025. Payment date: 30 October 2025. Payout ratio is a comfortable 22% but the company is not cash flow positive. Trailing yield: 0.5%. Lower than top quartile of Indian dividend payers (1.2%). Lower than average of industry peers (0.9%).
Declared Dividend • Aug 31Dividend of ₹2.00 announcedShareholders will receive a dividend of ₹2.00. Ex-date: 23rd September 2025 Payment date: 30th October 2025 Dividend yield will be 0.5%, which is lower than the industry average of 0.8%. Sustainability & Growth Dividend is covered by earnings (22% earnings payout ratio) but the company has no free cash flows available, indicating it may be using cash reserves or debt to pay the dividend. The dividend has increased by an average of 10% per year over the past 10 years. However, payments have been volatile during that time. EPS is expected to grow by 71% over the next 3 years, which should provide support to the dividend and adequate earnings cover.
공지 • Aug 29Mold-Tek Packaging Limited, Annual General Meeting, Sep 30, 2025Mold-Tek Packaging Limited, Annual General Meeting, Sep 30, 2025, at 10:00 Indian Standard Time.
Buy Or Sell Opportunity • Aug 11Now 20% overvalued after recent price riseOver the last 90 days, the stock has risen 47% to ₹794. The fair value is estimated to be ₹661, however this is not to be taken as a sell recommendation but rather should be used as a guide only. Revenue has grown by 3.4% over the last 3 years. Earnings per share has declined by 9.2%. Revenue is forecast to grow by 36% in 2 years. Earnings are forecast to grow by 71% in the next 2 years.
분석 기사 • Jul 31Mold-Tek Packaging Limited Beat Analyst Estimates: See What The Consensus Is Forecasting For This YearMold-Tek Packaging Limited ( NSE:MOLDTKPAC ) investors will be delighted, with the company turning in some strong...
Price Target Changed • Jul 30Price target increased by 8.0% to ₹881Up from ₹816, the current price target is an average from 9 analysts. New target price is approximately in line with last closing price of ₹846. Stock is up 1.3% over the past year. The company is forecast to post earnings per share of ₹24.65 for next year compared to ₹18.22 last year.
Reported Earnings • Jul 29First quarter 2026 earnings: EPS and revenues exceed analyst expectationsFirst quarter 2026 results: EPS: ₹6.74 (up from ₹4.97 in 1Q 2025). Revenue: ₹2.41b (up 23% from 1Q 2025). Net income: ₹224.0m (up 36% from 1Q 2025). Profit margin: 9.3% (up from 8.4% in 1Q 2025). The increase in margin was driven by higher revenue. Revenue exceeded analyst estimates by 9.2%. Earnings per share (EPS) also surpassed analyst estimates by 19%. Revenue is forecast to grow 12% p.a. on average during the next 3 years, compared to a 11% growth forecast for the Packaging industry in India. Over the last 3 years on average, earnings per share has fallen by 9% per year but the company’s share price has only fallen by 1% per year, which means it has not declined as severely as earnings.
공지 • Jul 21Mold-Tek Packaging Limited to Report Q1, 2026 Results on Jul 28, 2025Mold-Tek Packaging Limited announced that they will report Q1, 2026 results on Jul 28, 2025
분석 기사 • May 26Earnings Tell The Story For Mold-Tek Packaging Limited (NSE:MOLDTKPAC) As Its Stock Soars 25%Mold-Tek Packaging Limited ( NSE:MOLDTKPAC ) shareholders have had their patience rewarded with a 25% share price jump...
분석 기사 • May 23Mold-Tek Packaging (NSE:MOLDTKPAC) Might Be Having Difficulty Using Its Capital EffectivelyIf you're not sure where to start when looking for the next multi-bagger, there are a few key trends you should keep an...
공지 • May 13Mold-Tek Packaging Limited to Report Q4, 2025 Results on May 19, 2025Mold-Tek Packaging Limited announced that they will report Q4, 2025 results on May 19, 2025
공지 • Apr 25Mold-Tek Packaging Limited Declares Interim Dividend for the Financial Year 2024-25Mold-Tek Packaging Limited announced that the Board of Directors of the Company at its meeting held on April 25, 2025, have, inter-alia, declared an Interim Dividend of INR 2 /- (Rupees two only) per equity share (40 %) for the Financial Year 2024-25. Further as per letter dated April 22, 2025, the Record Date for the purpose of ascertaining the eligibility of members for payment of interim dividend shall be May 02, 2025.
분석 기사 • Feb 12Earnings Miss: Mold-Tek Packaging Limited Missed EPS By 5.5% And Analysts Are Revising Their ForecastsMold-Tek Packaging Limited ( NSE:MOLDTKPAC ) last week reported its latest quarterly results, which makes it a good...
Price Target Changed • Feb 10Price target decreased by 9.5% to ₹924Down from ₹1,020, the current price target is an average from 10 analysts. New target price is 63% above last closing price of ₹567. Stock is down 35% over the past year. The company is forecast to post earnings per share of ₹18.45 for next year compared to ₹20.07 last year.
Reported Earnings • Feb 08Third quarter 2025 earnings: EPS misses analyst expectationsThird quarter 2025 results: EPS: ₹4.11 (down from ₹4.28 in 3Q 2024). Revenue: ₹1.91b (up 15% from 3Q 2024). Net income: ₹136.4m (down 3.9% from 3Q 2024). Profit margin: 7.1% (down from 8.6% in 3Q 2024). The decrease in margin was driven by higher expenses. Revenue was in line with analyst estimates. Earnings per share (EPS) missed analyst estimates by 5.5%. Revenue is forecast to grow 13% p.a. on average during the next 3 years, compared to a 12% growth forecast for the Packaging industry in India. Over the last 3 years on average, earnings per share has fallen by 7% per year whereas the company’s share price has fallen by 9% per year.
공지 • Feb 07Mold-Tek Packaging Limited Announces Appointment of Ms. Harshita Suresh Chandnani as Company Secretary and Compliance Officer (Key Managerial Personnel), March 11, 2025Mold-Tek Packaging Limited announced that at its board meeting held on February 7, 2025, appointment of Ms. Harshita Suresh Chandnani as Company Secretary and Compliance Officer (Key Managerial Personnel) of the Company with effect from the commencement of business hours on 11th March, 2025. Ms. Harshita Suresh Chandnani is a qualified Company Secretary and an Associate Member of the Institute of Company Secretaries of India (ICSI) with Membership No. A64959, She secured an All India Rank of 13 in the CS Foundation. She also holds a Post Graduate Diploma in Taxation Laws from Swami Ramanand § Teertha Marathwada University, Maharashtra. With over three and a half years of professional experience, she has expertise in Corporate Secretarial functions, specializing in areas such as Company Law, SEBI regulations, and related acts, rules, and regulations.
분석 기사 • Feb 05Here's What's Concerning About Mold-Tek Packaging's (NSE:MOLDTKPAC) Returns On CapitalDid you know there are some financial metrics that can provide clues of a potential multi-bagger? Ideally, a business...
공지 • Jan 31Mold-Tek Packaging Limited to Report Q3, 2025 Results on Feb 07, 2025Mold-Tek Packaging Limited announced that they will report Q3, 2025 results on Feb 07, 2025
공지 • Dec 13Mold-Tek Packaging Limited Announces Resignation of Subhojeet Bhattacharjee as Company SecretaryMold-Tek Packaging Limited announced that Mr. Subhojeet Bhattacharjee, has tendered his resignation from the position of Company Secretary and Compliance Officer of the Company with effect from the close of business on the 13 day of December, 2024, due to his personal preoccupations and has confirmed that there are no other material reasons for his resignation.
분석 기사 • Dec 11Some Shareholders Feeling Restless Over Mold-Tek Packaging Limited's (NSE:MOLDTKPAC) P/E RatioWith a price-to-earnings (or "P/E") ratio of 40.6x Mold-Tek Packaging Limited ( NSE:MOLDTKPAC ) may be sending bearish...
분석 기사 • Nov 10Analysts Are Updating Their Mold-Tek Packaging Limited (NSE:MOLDTKPAC) Estimates After Its Second-Quarter ResultsLast week, you might have seen that Mold-Tek Packaging Limited ( NSE:MOLDTKPAC ) released its second-quarter result to...
Reported Earnings • Nov 08Second quarter 2025 earnings released: EPS: ₹4.25 (vs ₹4.73 in 2Q 2024)Second quarter 2025 results: EPS: ₹4.25 (down from ₹4.73 in 2Q 2024). Revenue: ₹1.92b (up 13% from 2Q 2024). Net income: ₹141.1m (down 10.0% from 2Q 2024). Profit margin: 7.4% (down from 9.2% in 2Q 2024). The decrease in margin was driven by higher expenses. Revenue is forecast to grow 16% p.a. on average during the next 3 years, compared to a 12% growth forecast for the Packaging industry in India. Over the last 3 years on average, earnings per share has fallen by 5% per year whereas the company’s share price has fallen by 1% per year.
분석 기사 • Nov 02Mold-Tek Packaging (NSE:MOLDTKPAC) Will Want To Turn Around Its Return TrendsWhat are the early trends we should look for to identify a stock that could multiply in value over the long term...
공지 • Oct 31Mold-Tek Packaging Limited to Report Q2, 2025 Results on Nov 07, 2024Mold-Tek Packaging Limited announced that they will report Q2, 2025 results on Nov 07, 2024
Upcoming Dividend • Sep 15Upcoming dividend of ₹1.00 per shareEligible shareholders must have bought the stock before 19 September 2024. Payment date: 26 October 2024. Payout ratio is a comfortable 15% but the company is not cash flow positive. Trailing yield: 0.4%. Lower than top quartile of Indian dividend payers (1.0%). Lower than average of industry peers (0.7%).
Declared Dividend • Aug 31Dividend of ₹1.00 announcedShareholders will receive a dividend of ₹1.00. Ex-date: 19th September 2024 Payment date: 26th October 2024 Dividend yield will be 0.4%, which is lower than the industry average of 0.8%. Sustainability & Growth Dividend is covered by earnings (15% earnings payout ratio) but the company has no free cash flows available, indicating it may be using cash reserves or debt to pay the dividend. The dividend has increased by an average of 12% per year over the past 10 years. However, payments have been volatile during that time. EPS is expected to grow by 78% over the next 3 years, which should provide support to the dividend and adequate earnings cover.
공지 • Aug 29Mold-Tek Packaging Limited, Annual General Meeting, Sep 26, 2024Mold-Tek Packaging Limited, Annual General Meeting, Sep 26, 2024, at 11:00 Indian Standard Time.
Reported Earnings • Aug 03First quarter 2025 earnings: EPS and revenues miss analyst expectationsFirst quarter 2025 results: EPS: ₹4.97 (down from ₹5.65 in 1Q 2024). Revenue: ₹1.98b (up 6.3% from 1Q 2024). Net income: ₹165.3m (down 12% from 1Q 2024). Profit margin: 8.4% (down from 10% in 1Q 2024). The decrease in margin was driven by higher expenses. Revenue missed analyst estimates by 4.5%. Earnings per share (EPS) also missed analyst estimates by 24%. Revenue is forecast to grow 18% p.a. on average during the next 3 years, compared to a 12% growth forecast for the Packaging industry in India. Over the last 3 years on average, earnings per share has fallen by 2% per year but the company’s share price has increased by 15% per year, which means it is well ahead of earnings.
공지 • Aug 02Mold-Tek Packaging Limited Proposes Final Dividend for the Financial Year 2023-24Mold-Tek Packaging Limited announced at the board meeting held on August 2, 2024, Recommended a final dividend of INR 1.00/- per equity hare for the financial year 2023-24 n Equity Share of face value of INR 5 each . The Board of Directors had earlier declared and paid an interim dividend of INR 2.00/- per equity share on face value of INR 5/- each at its meeting held on 3rd April 2024 . The total dividend for the aforesaid financial year thus amounts to INR 3.00/- per equity share on face value of INR 5/- each. The Final Dividend of INR 1.00/- per equity share is subject to the approval declaration of/by Members at the upcoming Annual General Meeting and the Record Date/Book Closure Period for the purpose of payment of the said Final Dividend for the financial year 2023-24 will be determined later.
공지 • Jul 26Mold-Tek Packaging Limited to Report Q1, 2025 Results on Aug 02, 2024Mold-Tek Packaging Limited announced that they will report Q1, 2025 results on Aug 02, 2024
Buy Or Sell Opportunity • Jul 26Now 21% overvaluedOver the last 90 days, the stock has fallen 6.0% to ₹797. The fair value is estimated to be ₹659, however this is not to be taken as a sell recommendation but rather should be used as a guide only. Revenue has grown by 10% over the last 3 years. Earnings per share has grown by 3.1%. For the next 3 years, revenue is forecast to grow by 16% per annum. Earnings are also forecast to grow by 22% per annum over the same time period.
Buy Or Sell Opportunity • Jul 09Now 21% overvaluedOver the last 90 days, the stock has fallen 4.9% to ₹806. The fair value is estimated to be ₹664, however this is not to be taken as a sell recommendation but rather should be used as a guide only. Revenue has grown by 10% over the last 3 years. Earnings per share has grown by 3.1%. For the next 3 years, revenue is forecast to grow by 16% per annum. Earnings are also forecast to grow by 22% per annum over the same time period.
분석 기사 • Jun 07Mold-Tek Packaging's (NSE:MOLDTKPAC) Weak Earnings May Only Reveal A Part Of The Whole PictureLast week's earnings announcement from Mold-Tek Packaging Limited ( NSE:MOLDTKPAC ) was disappointing to investors...
Reported Earnings • Jun 04Full year 2024 earnings: EPS exceeds analyst expectations while revenues lag behindFull year 2024 results: EPS: ₹20.07 (down from ₹24.41 in FY 2023). Revenue: ₹7.00b (down 4.1% from FY 2023). Net income: ₹665.9m (down 17% from FY 2023). Profit margin: 9.5% (down from 11% in FY 2023). The decrease in margin was driven by lower revenue. Revenue missed analyst estimates by 1.5%. Earnings per share (EPS) exceeded analyst estimates by 2.1%. Revenue is forecast to grow 17% p.a. on average during the next 3 years, compared to a 11% growth forecast for the Packaging industry in India. Over the last 3 years on average, earnings per share has increased by 3% per year but the company’s share price has increased by 14% per year, which means it is tracking significantly ahead of earnings growth.
공지 • May 25Mold-Tek Packaging Limited to Report Q4, 2024 Results on May 30, 2024Mold-Tek Packaging Limited announced that they will report Q4, 2024 results on May 30, 2024
분석 기사 • Apr 09Mold-Tek Packaging (NSE:MOLDTKPAC) Will Want To Turn Around Its Return TrendsDid you know there are some financial metrics that can provide clues of a potential multi-bagger? Firstly, we'll want...
Declared Dividend • Apr 05Dividend reduced to ₹2.00Dividend of ₹2.00 is 50% lower than last year. Ex-date: 12th April 2024 Payment date: 2nd May 2024 Dividend yield will be 0.5%, which is lower than the industry average of 0.8%. Sustainability & Growth Dividend is covered by earnings (9% earnings payout ratio) but the company has no free cash flows available, indicating it may be using cash reserves or debt to pay the dividend. The dividend has increased by an average of 20% per year over the past 10 years. However, payments have been volatile during that time. EPS is expected to grow by 91% over the next 3 years, which should provide support to the dividend and adequate earnings cover.
공지 • Apr 03Mold-Tek Packaging Limited Declares Interim Equity Dividend for the Financial Year 2023-24, Payable on or Before 2 May, 2024Mold-Tek Packaging Limited announced that at the Board of Directors meeting held on 3 April, 2024, have declared an Interim Equity Dividend for the Financial Year 2023-24 at the rate of 40%, that is INR 2.00 per equity share on face value of INR 5.00 per equity share. As intimated vide letter dated 29 March, 2024, the record date for reckoning the list of equity shareholders who will be entitled to receive the said interim equity dividend shall be 12 April, 2024. The interim dividend will be paid to such shareholders on or before 2 May, 2024.
분석 기사 • Feb 14Mold-Tek Packaging Limited Just Missed Earnings - But Analysts Have Updated Their ModelsAs you might know, Mold-Tek Packaging Limited ( NSE:MOLDTKPAC ) last week released its latest quarterly, and things did...
Reported Earnings • Feb 10Third quarter 2024 earnings: Revenues miss analyst expectationsThird quarter 2024 results: Revenue: ₹1.66b (up 6.9% from 3Q 2023). Net income: ₹142.0m (down 13% from 3Q 2023). Profit margin: 8.6% (down from 11% in 3Q 2023). The decrease in margin was driven by higher expenses. Revenue missed analyst estimates by 3.4%. Revenue is forecast to grow 21% p.a. on average during the next 3 years, compared to a 15% growth forecast for the Packaging industry in India. Over the last 3 years on average, earnings per share has increased by 12% per year but the company’s share price has increased by 30% per year, which means it is tracking significantly ahead of earnings growth.
공지 • Feb 03Mold-Tek Packaging Limited to Report Q3, 2024 Results on Feb 09, 2024Mold-Tek Packaging Limited announced that they will report Q3, 2024 results on Feb 09, 2024
Reported Earnings • Nov 09Second quarter 2024 earnings: EPS and revenues miss analyst expectationsSecond quarter 2024 results: EPS: ₹4.73 (down from ₹5.86 in 2Q 2023). Revenue: ₹1.70b (down 6.7% from 2Q 2023). Net income: ₹156.9m (down 19% from 2Q 2023). Profit margin: 9.2% (down from 11% in 2Q 2023). The decrease in margin was driven by lower revenue. Revenue missed analyst estimates by 8.6%. Earnings per share (EPS) also missed analyst estimates by 17%. Revenue is forecast to grow 20% p.a. on average during the next 3 years, compared to a 13% growth forecast for the Packaging industry in India. Over the last 3 years on average, earnings per share has increased by 16% per year but the company’s share price has increased by 48% per year, which means it is tracking significantly ahead of earnings growth.
공지 • Oct 31Mold-Tek Packaging Limited to Report Q2, 2024 Results on Nov 07, 2023Mold-Tek Packaging Limited announced that they will report Q2, 2024 results on Nov 07, 2023
공지 • Sep 27+ 1 more updateMold-Tek Packaging Limited Appoints Ponnuswamy Ramnath as Independent Non-Executive Director of the CompanyMold-Tek Packaging Limited at its annual general meeting held on September 26, 2023,the company appointed Mr. Ponnuswamy Ramnath, Additional Director (Category: Non-Executive, Independent), as an Independent Non-Executive Director of the company.
Upcoming Dividend • Sep 11Upcoming dividend of ₹2.00 per share at 0.6% yieldEligible shareholders must have bought the stock before 18 September 2023. Payment date: 26 October 2023. Payout ratio is a comfortable 25% but the company is paying out more than the cash it is generating. Trailing yield: 0.6%. Lower than top quartile of Indian dividend payers (1.3%). Lower than average of industry peers (0.9%).
공지 • Sep 03Mold-Tek Packaging Limited Proposes Final Dividend for the Financial Year Ended March 31, 2023Mold-Tek Packaging Limited at the AGM to be held on September 26, 2023, the shareholders proposed to declare the final dividend maximum to the extend as recommended by Board i.e., INR 2.00 (40%) per equity share of face value of INR 5.00 each for the financial year ended March 31, 2023.
분석 기사 • Sep 01Mold-Tek Packaging (NSE:MOLDTKPAC) Is Paying Out A Dividend Of ₹2.00The board of Mold-Tek Packaging Limited ( NSE:MOLDTKPAC ) has announced that it will pay a dividend on the 26th of...
공지 • Aug 30Mold-Tek Packaging Limited, Annual General Meeting, Sep 26, 2023Mold-Tek Packaging Limited, Annual General Meeting, Sep 26, 2023, at 11:00 Indian Standard Time.
공지 • Aug 10Mold-Tek Packaging Limited Appoints Ponnuswamy Ramnath as Additional DirectorThe Board of Directors of the Mold-Tek Packaging Limited based on the recommendation of the Nomination and Remuneration Committee approved theappointment of Mr. Ponnuswamy Ramnath as an Additional Director (Category: Non-Executive, Independent) on the Board of the Company with effect from 17th August, 2023. Mr. Ponnuswamy Ramnath has extensive experience in sales and marketing, business development, strategy, operations and has managed businesses across diverse industries such as petrochemicals, building products, chemicals/specialty chemicals, paper and packaging board, base metals (copper) & precious metals across MNCs and Indian Corporates. Over a career spanning 30 + years, he has built-up market for new products from scratch, acquired businesses, established new applications, set up new projects and managed businesses with turnover up to 21,000 Crores (USD 3.5 Billion) with highprofitability and ROCE and has worked/was associated with esteemed organizations like Reliance Industries Limited, Vedanta Limited, J.K. Paper Limited, Jubilant Life Sciences Ltd., Praxair India Limited, Bakelite Hylam Limited etc. Currently he is acting as the Managing Partner - CEO Practice- Metals, Mining and Chemicals of Gladwin International & Company.
분석 기사 • Aug 06Analyst Forecasts Just Became More Bearish On Mold-Tek Packaging Limited (NSE:MOLDTKPAC)Today is shaping up negative for Mold-Tek Packaging Limited ( NSE:MOLDTKPAC ) shareholders, with the analysts...
Reported Earnings • Aug 05First quarter 2024 earnings: EPS and revenues miss analyst expectationsFirst quarter 2024 results: EPS: ₹5.65 (down from ₹6.27 in 1Q 2023). Revenue: ₹1.87b (down 4.4% from 1Q 2023). Net income: ₹187.3m (down 8.9% from 1Q 2023). Profit margin: 10.0% (in line with 1Q 2023). Revenue missed analyst estimates by 8.8%. Earnings per share (EPS) also missed analyst estimates by 14%. Revenue is forecast to grow 21% p.a. on average during the next 3 years, compared to a 13% growth forecast for the Packaging industry in India. Over the last 3 years on average, earnings per share has increased by 22% per year but the company’s share price has increased by 54% per year, which means it is tracking significantly ahead of earnings growth.
공지 • Jul 29Mold-Tek Packaging Limited to Report Q1, 2024 Results on Aug 04, 2023Mold-Tek Packaging Limited announced that they will report Q1, 2024 results on Aug 04, 2023
Reported Earnings • May 05Full year 2023 earnings: EPS and revenues miss analyst expectationsFull year 2023 results: EPS: ₹24.27 (up from ₹22.12 in FY 2022). Revenue: ₹7.31b (up 16% from FY 2022). Net income: ₹804.3m (up 26% from FY 2022). Profit margin: 11% (in line with FY 2022). Revenue missed analyst estimates by 2.4%. Earnings per share (EPS) also missed analyst estimates by 1.1%. Revenue is forecast to grow 20% p.a. on average during the next 3 years, compared to a 13% growth forecast for the Packaging industry in India. Over the last 3 years on average, earnings per share has increased by 26% per year but the company’s share price has increased by 78% per year, which means it is tracking significantly ahead of earnings growth.
공지 • May 04Mold-Tek Packaging Limited Recommends Final Dividend for the Financial Year 2022-23The board of directors of Mold-Tek Packaging Limited meeting held on May 3, 2023, recommended a final dividend of INR 2.00 per equity share for the financial year 2022-23 on equity shares of face value of INR 5 each. The Board of Directors had earlier declared and paid an interim dividend of INR 4.00 per equity share on face value of INR 5 each at its meeting held on 12th April, 2023. The total dividend for the aforesaid financial year thus amounts to INR 6.00 per equity share on face value of INR 5 each. The Final Dividend of INR 2.00 per equity share is subject to the approval/declaration of/by Members at the upcoming Annual General Meeting and the Record Date/Book Closure Period for the purpose of payment of the said Final Dividend for the financial year 2022-23 will be determined later.
분석 기사 • Apr 15Mold-Tek Packaging (NSE:MOLDTKPAC) Is Reducing Its Dividend To ₹4.00Mold-Tek Packaging Limited ( NSE:MOLDTKPAC ) has announced it will be reducing its dividend payable on the 11th of May...
Board Change • Mar 14Insufficient new directorsNo new directors have joined the board in the last 3 years. The company's board is composed of: No new directors. 5 experienced directors. 4 highly experienced directors. Non-Executive Independent Woman Director Madhuri Venkata Viswanadham was the last director to join the board, commencing their role in 2020. The following issues are considered to be risks according to the Simply Wall St Risk Model: Insufficient board refreshment.
Price Target Changed • Feb 24Price target increased by 12% to ₹1,094Up from ₹979, the current price target is an average from 5 analysts. New target price is 14% above last closing price of ₹956. Stock is up 42% over the past year. The company is forecast to post earnings per share of ₹24.78 for next year compared to ₹22.12 last year.
Reported Earnings • Feb 07Third quarter 2023 earnings released: EPS: ₹4.92 (vs ₹5.80 in 3Q 2022)Third quarter 2023 results: EPS: ₹4.92 (down from ₹5.80 in 3Q 2022). Revenue: ₹1.55b (down 3.1% from 3Q 2022). Net income: ₹163.1m (down 2.1% from 3Q 2022). Profit margin: 11% (in line with 3Q 2022). Revenue is forecast to grow 20% p.a. on average during the next 3 years, compared to a 12% growth forecast for the Packaging industry in India. Over the last 3 years on average, earnings per share has increased by 28% per year but the company’s share price has increased by 53% per year, which means it is tracking significantly ahead of earnings growth.
Price Target Changed • Nov 16Price target increased to ₹919Up from ₹847, the current price target is an average from 7 analysts. New target price is 8.4% above last closing price of ₹847. Stock is up 18% over the past year. The company is forecast to post earnings per share of ₹27.19 for next year compared to ₹22.12 last year.
분석 기사 • Sep 24It Looks Like The CEO Of Mold-Tek Packaging Limited (NSE:MOLDTKPAC) May Be Underpaid Compared To PeersThe impressive results at Mold-Tek Packaging Limited ( NSE:MOLDTKPAC ) recently will be great news for shareholders. At...
Upcoming Dividend • Sep 15Upcoming dividend of ₹2.00 per shareEligible shareholders must have bought the stock before 22 September 2022. Payment date: 30 October 2022. Payout ratio is a comfortable 36% but the company is not cash flow positive. Trailing yield: 0.8%. Lower than top quartile of Indian dividend payers (1.5%). Lower than average of industry peers (1.1%).
Reported Earnings • Sep 06Full year 2022 earnings released: EPS: ₹22.12 (vs ₹16.82 in FY 2021)Full year 2022 results: EPS: ₹22.12 (up from ₹16.82 in FY 2021). Revenue: ₹6.31b (up 32% from FY 2021). Net income: ₹636.5m (up 33% from FY 2021). Profit margin: 10% (in line with FY 2021). Revenue is forecast to grow 18% p.a. on average during the next 2 years, compared to a 12% growth forecast for the Packaging industry in India. Over the last 3 years on average, earnings per share has increased by 26% per year but the company’s share price has increased by 47% per year, which means it is tracking significantly ahead of earnings growth.
분석 기사 • Sep 05Mold-Tek Packaging's (NSE:MOLDTKPAC) Dividend Is Being Reduced To ₹2.00Mold-Tek Packaging Limited ( NSE:MOLDTKPAC ) is reducing its dividend from last year's comparable payment to ₹2.00 on...
분석 기사 • Aug 09Is Mold-Tek Packaging (NSE:MOLDTKPAC) A Risky Investment?Howard Marks put it nicely when he said that, rather than worrying about share price volatility, 'The possibility of...
공지 • Jul 15+ 1 more updateMold-Tek Packaging Limited to Report Q3, 2023 Results on Feb 14, 2023Mold-Tek Packaging Limited announced that they will report Q3, 2023 results on Feb 14, 2023
분석 기사 • May 17Mold-Tek Packaging (NSE:MOLDTKPAC) Strong Profits May Be Masking Some Underlying IssuesMold-Tek Packaging Limited's ( NSE:MOLDTKPAC ) healthy profit numbers didn't contain any surprises for investors. We...
Reported Earnings • May 11Full year 2022 earnings: EPS misses analyst expectationsFull year 2022 results: EPS: ₹22.12 (up from ₹16.82 in FY 2021). Revenue: ₹6.33b (up 32% from FY 2021). Net income: ₹636.5m (up 33% from FY 2021). Profit margin: 10% (in line with FY 2021). Revenue was in line with analyst estimates. Earnings per share (EPS) missed analyst estimates by 6.8%. Over the next year, revenue is forecast to grow 15%, compared to a 11% growth forecast for the industry in India. Over the last 3 years on average, earnings per share has increased by 26% per year but the company’s share price has increased by 43% per year, which means it is tracking significantly ahead of earnings growth.
분석 기사 • May 11Is Now The Time To Put Mold-Tek Packaging (NSE:MOLDTKPAC) On Your Watchlist?It's only natural that many investors, especially those who are new to the game, prefer to buy shares in 'sexy' stocks...
Price Target Changed • Apr 27Price target increased to ₹775Up from ₹709, the current price target is an average from 8 analysts. New target price is approximately in line with last closing price of ₹804. Stock is up 87% over the past year. The company is forecast to post earnings per share of ₹22.69 for next year compared to ₹16.82 last year.
Price Target Changed • Feb 02Price target increased to ₹771Up from ₹709, the current price target is an average from 7 analysts. New target price is approximately in line with last closing price of ₹760. Stock is up 121% over the past year. The company is forecast to post earnings per share of ₹23.40 for next year compared to ₹16.82 last year.
Reported Earnings • Jan 28Third quarter 2022 earnings: EPS exceeds analyst expectations while revenues lag behindThird quarter 2022 results: EPS: ₹5.80 (up from ₹5.26 in 3Q 2021). Revenue: ₹1.60b (up 20% from 3Q 2021). Net income: ₹166.6m (up 12% from 3Q 2021). Profit margin: 10% (in line with 3Q 2021). Revenue missed analyst estimates by 2.7%. Earnings per share (EPS) exceeded analyst estimates by 1.6%. Over the next year, revenue is forecast to grow 12%, compared to a 8.1% growth forecast for the industry in India. Over the last 3 years on average, earnings per share has increased by 25% per year but the company’s share price has increased by 47% per year, which means it is tracking significantly ahead of earnings growth.
Price Target Changed • Nov 13Price target increased to ₹686Up from ₹610, the current price target is an average from 7 analysts. New target price is approximately in line with last closing price of ₹717. Stock is up 142% over the past year. The company is forecast to post earnings per share of ₹23.15 for next year compared to ₹16.82 last year.
Reported Earnings • Nov 05Second quarter 2022 earnings released: EPS ₹6.23 (vs ₹4.85 in 2Q 2021)The company reported a solid second quarter result with improved earnings and revenues, although profit margins were flat. Second quarter 2022 results: Revenue: ₹1.60b (up 34% from 2Q 2021). Net income: ₹175.9m (up 31% from 2Q 2021). Profit margin: 11% (in line with 2Q 2021). Over the last 3 years on average, earnings per share has increased by 22% per year but the company’s share price has increased by 41% per year, which means it is tracking significantly ahead of earnings growth.
분석 기사 • Oct 08I Ran A Stock Scan For Earnings Growth And Mold-Tek Packaging (NSE:MOLDTKPAC) Passed With EaseSome have more dollars than sense, they say, so even companies that have no revenue, no profit, and a record of falling...
Valuation Update With 7 Day Price Move • Oct 07Investor sentiment improved over the past weekAfter last week's 15% share price gain to ₹673, the stock trades at a forward P/E ratio of 28x. Average forward P/E is 20x in the Packaging industry in India. Total returns to shareholders of 177% over the past three years. Simply Wall St's valuation model estimates the intrinsic value at ₹450 per share.
분석 기사 • Sep 23We Take A Look At Why Mold-Tek Packaging Limited's (NSE:MOLDTKPAC) CEO Compensation Is Well EarnedThe performance at Mold-Tek Packaging Limited ( NSE:MOLDTKPAC ) has been quite strong recently and CEO Lakshmana...
분석 기사 • Sep 14Here's What Mold-Tek Packaging's (NSE:MOLDTKPAC) Strong Returns On Capital MeanIf we want to find a potential multi-bagger, often there are underlying trends that can provide clues. Firstly, we'd...
Valuation Update With 7 Day Price Move • Sep 14Investor sentiment improved over the past weekAfter last week's 20% share price gain to ₹578, the stock trades at a forward P/E ratio of 22x. Average forward P/E is 20x in the Packaging industry in India. Total returns to shareholders of 89% over the past three years. Simply Wall St's valuation model estimates the intrinsic value at ₹448 per share.
Recent Insider Transactions • Aug 14Insider recently sold ₹78m worth of stockOn the 6th of August, Adhivishnu Mythri sold around 150k shares on-market at roughly ₹517 per share. This was the largest sale by an insider in the last 3 months. Insiders have been net sellers, collectively disposing of ₹163m more than they bought in the last 12 months.
Price Target Changed • Aug 01Price target increased to ₹569Up from ₹526, the current price target is an average from 5 analysts. New target price is 7.9% above last closing price of ₹527. Stock is up 130% over the past year.
Reported Earnings • Jul 29First quarter 2022 earnings released: EPS ₹4.32 (vs ₹0.55 in 1Q 2021)The company reported a strong first quarter result with improved earnings, revenues and profit margins. First quarter 2022 results: Revenue: ₹1.34b (up 105% from 1Q 2021). Net income: ₹120.8m (up ₹105.7m from 1Q 2021). Profit margin: 9.0% (up from 2.3% in 1Q 2021). The increase in margin was driven by higher revenue. Over the last 3 years on average, earnings per share has increased by 18% per year whereas the company’s share price has increased by 20% per year.
Recent Insider Transactions • Jul 07Deputy MD & Executive Director recently sold ₹1.2m worth of stockOn the 29th of June, Pattabhi Rao sold around 3k shares on-market at roughly ₹482 per share. In the last 3 months, there was an even bigger sale from another insider worth ₹4.8m. Insiders have been net sellers, collectively disposing of ₹7.0m more than they bought in the last 12 months.
Recent Insider Transactions • Jun 13Insider recently sold ₹4.8m worth of stockOn the 10th of June, Adivishnu Sundeep sold around 9k shares on-market at roughly ₹502 per share. This was the largest sale by an insider in the last 3 months. This was the only on-market transaction from insiders over the last 12 months.
분석 기사 • Jun 07Should You Be Adding Mold-Tek Packaging (NSE:MOLDTKPAC) To Your Watchlist Today?Like a puppy chasing its tail, some new investors often chase 'the next big thing', even if that means buying 'story...
Reported Earnings • May 28Full year 2021 earnings released: EPS ₹16.82 (vs ₹13.51 in FY 2020)The company reported a strong full year result with improved earnings, revenues and profit margins. Full year 2021 results: Revenue: ₹4.80b (up 9.5% from FY 2020). Net income: ₹479.6m (up 28% from FY 2020). Profit margin: 10.0% (up from 8.5% in FY 2020). The increase in margin was driven by higher revenue. Over the last 3 years on average, earnings per share has increased by 12% per year whereas the company’s share price has increased by 15% per year.