Reported Earnings • 14h
Second quarter 2026 earnings released: EPS: US$0.21 (vs US$0.015 in 2Q 2025) Second quarter 2026 results: EPS: US$0.21 (up from US$0.015 in 2Q 2025). Revenue: US$888.6m (up 17% from 2Q 2025). Net income: US$28.1m (up US$26.1m from 2Q 2025). Profit margin: 3.2% (up from 0.3% in 2Q 2025). The increase in margin was driven by higher revenue. Revenue is forecast to grow 13% p.a. on average during the next 3 years, compared to a 10% growth forecast for the Electronic industry in Germany. 공고 • 14h
Vishay Intertechnology, Inc. Provides Earnings Guidance for the Third Quarter of 2026 Vishay Intertechnology, Inc. provided earnings guidance for the third quarter of 2026. For the third quarter of 2026, management expects revenue sin the range of $945 million and $975 million and a gross profit margin in the range of 24.0% +/- 50 basis points. 공고 • Jul 09
Vishay Intertechnology Introduces Automotive Optocoupler in Sop-5 Package with 3.6 Mm Width Vishay Intertechnology, Inc. introduced an automotive 1 MBd high speed optocoupler in a new SOP-5 package with a narrow width of 3.6 mm. Combining a comparative tracking index (CTI) of 400 with industry-leading minimum guaranteed common mode transient immunity (CMTI) of 40 kV/µS, the Vishay Semiconductors VOMHA43A is designed to deliver improved signal transmission quality and save space in applications requiring isolation voltages (VIORM) up to 707 Vpeak. The AEC-Q102 qualified device released is optimized for isolated data communication, fast signal switching, ground signal isolation, and logic voltage level shifting in automotive, industrial, home and building control, and telecom applications. In electric (EV), hybrid electric (HEV), and low speed electric (LSEV) vehicles, the optocoupler provides communication bus isolation for CAN, LIN, I²C, and SPI interfaces, as well as isolated drive circuit applications such as intelligent power module (IPM) drivers. While previous SOP-5 packages offered a width of 4.4 mm, the narrower SOP-5 of the VOMHA43A requires less PCB space, while supporting stackable designs. The device’s minimum CMTI — which is more than double that of the closest competing device — provides enhanced robustness against electrical spikes and RF and EMI issues. And while competing devices offer maximum repetitive peak isolation voltages of 567 Vpeak, the optocoupler’s isolation voltage performance of 707 Vpeak meets the requirements of 400 V battery systems. The VOMHA43A consists of a GaAlAs infrared emitting diode, optically coupled with an integrated photodetector and a high speed transistor. The photodetector is junction-isolated from the transistor to reduce miller capacitance effects. The optocoupler features an open collector output function that allows designers to adjust load conditions when interfacing with different logic systems, while a Faraday shield on the detector chip allows the device to reject and minimize high input to output common mode transient voltages. The RoHS-compliant and halogen-free optocoupler operates over a temperature range of -40 °C to +125 °C and is pin to pin compatible with competing parts to provide a direct replacement and eliminate the need for electrical and mechanical redesigns. Samples and production quantities of the VOMHA43A are available, with lead times of six weeks. Buy Or Sell Opportunity • Jul 05
Now 26% undervalued The stock has been flat over the last 90 days, currently trading at €40.79. The fair value is estimated to be €55.33, however this is not to be taken as a buy recommendation but rather should be used as a guide only. Revenue has declined by 5.9% over the last 3 years. Meanwhile, the company has become profitable. Revenue is forecast to grow by 16% in a year. Earnings are forecast to grow by 6,045% in the next year. 공고 • Jul 03
Vishay Intertechnology Introduces 34 PHE Multi-Turn Absolute Position Sensor Vishay Intertechnology, Inc. introduced a new ready-to-use multi-turn absolute position sensor designed for high accuracy and long term stability in demanding environments. Featuring non-contacting Hall Effect technology, the Vishay Sfernice 34 PHE delivers linearity down to ± 1% (full stroke), resolution of 1°, and a lifespan greater than 10 million cycles — all in a 7/8 in (22.2 mm) diameter body. Offering linear or rotary displacement tracking, with a total electrical angle of 3600° across 10 turns, the position sensor released is available at a 40% lower cost than previous-generation devices. Combined with its high accuracy and resolution, this makes the 34 PHE a cost-effective, high performance solution for servo loop motion control systems. The device will be used in industrial motor and actuator displacements tracking; linear actuators for solar panel tracking; flow control valve positioning; and throttle and pedal position sensors for applications such as agricultural machinery, railway equipment, and ships. For reliable operation in these harsh environments, the 34 PHE offers an IP65-rated sealing and withstands high frequency vibrations up to 20 g and shocks up to 50 g. Integrated reverse voltage and overvoltage input protections (-14 VDC and +28 VDC, respectively) reduce costs by eliminating the need for external protection circuitry. The device is configurable with either single or dual analog ratiometric or digital (PWM) output signals. Dual outputs operate as oppositely-tracking position sensors, providing a built-in fault detection to enhance safety, reliability, and functional safety compliance. An integrated locating peg on the mounting face simplifies installation while preventing rotation, improving alignment accuracy and long-term stability. As a “true power on” device, the 34 PHE reports its position immediately upon power-up without requiring recalibration, re-homing, or initialization routines — even after a power loss. This further reduces costs by eliminating the need for a battery back-up. Customizable to meet the most demanding needs, the RoHS-compliant device operates with a supply voltage of 5 VDC ± 10% and a supply current of < 8.5 mA typical (single output). The recommended load resistance is 1 kO for both analog and PWM output. Samples and production quantities of the 34 PHE are available now, with lead times of 14 weeks. 
