Duyuru • Jul 01
Slam Exploration Ltd., Annual General Meeting, Sep 09, 2026 Slam Exploration Ltd., Annual General Meeting, Sep 09, 2026. Location: british columbia, vancouver Canada Duyuru • Jun 18
Slam Exploration Ltd. Drills over 30 Meters of Massive Sulphide Beneath Vtem Conductor on the Goodwin Copper Nickel Cobalt Project Slam Exploration Ltd. announced it has drilled over 30 meters of massive sulphide mineralization in diamond drill hole GW26-29 including a 26.10 meter (‘m’) massive sulfide core interval from 18.70 to 44.80 m; a 1.85 m zone from 46.75-48.60 m plus a 2.15 m zone of massive sulphides from 57.9-60.05 m. The Company has completed 4 diamond drill holes (GW26-26 to GW26- 29) since mobilizing on June 1, 2026 for the 7,000 meter diamond drilling program on the Goodwin copper-nickel-cobalt project. All 4 holes have cut gabbro mineralized with pyrrhotite and assay results from all four holes are pending. A fifth hole, GW26-30, is currently in progress. The first 4 holes are described as follows: GW26-26 - Designed to test a VTEM conductor 1,600 meters southeast of the Farquharson zone. Drilled at azimuth 055° and dip of -50° from a collar at 476 m elevation (N 5,237,581 /E 699,469) to a depth of 200 m. The hole intersected a sequence of gabbro and mafic tuff with disseminated to semi-massive pyrrhotite present throughout the mineralized intervals. Pyrrhotite occurs as disseminated blebs and stringers, with massive seams from 148.15 to 148.20 and 149.27 149.60. Chalcopyrite noted in the deeper portions of the hole. A total of 57 core samples were submitted for assay. GW26-27 - Designed to test a VTEM conductor from a collar 80 meters east of the collar for Logan Zone hole GW24-15. Drilled at azimuth 215° and dip of -60° from a collar at 393 m elevation (N 5,239,345 /E 697,310) to a depth of 110 m. The hole intersected medium-grained gabbro with a sustained and progressive increase in pyrrhotite mineralization with depth across a 27.85 meter interval from 46.00 to 73.85 meters., demonstrating the strong association between the gabbro host rock and sulfide mineralization at this target. A total of 44 core samples were sawn and submitted for assay. GW26-28 - Designed to test a VTEM conductor from the same collar location as Logan zone drill hole GW24-08. Drilled at azimuth 360° and dip of -45° from a collar at 395 m elevation (N 5,239,410 /E 697,180) to a depth of 163 m. The hole intersected chloritized volcanics and gabbro with disseminated pyrrhotite present throughout, including localized intervals of promoted sulfide concentration and a short interval of massive pyrrhotite from 120.42 to 120.51. A total of 9 core samples were sawn and submitted for assay. GW26-29 - Highlight Hole - Designed to test a VTEM conductor 100 meters southeast of hole GW25- 27. Drilled at azimuth 120° and dip of -80° from a collar at 395 m elevation (N 5,239,268 /E 697,385) to a final depth of 137 m, Three discrete intervals of massive sulfide were intersected within a competent gabbro host rock, with the host rock largely replaced by sulfide mineralization and core recovery remaining excellent throughout: · 18.7-44.8 m: 26.1 m of massive sulfide mineralization · 46.75-48.6 m: 1.85 m of massive sulfide mineralization · 57.9-60.05 m: 2.15 m of massive sulfide mineralization The three zones combine for approximately 30.1 metres of massive sulfide over a downhole interval of approximately 42 metres, with the upper zone alone spanning over 26 continuous metres. Sulfide mineralization continues below the massive zones as disseminated and semi-massive pyrrhotite with associated chalcopyrite. The geometry and continuity of the sulphide system intersected in GW26-29 is consistent with the style of mineralization observed in significant magmatic copper-nickel-cobalt deposits. A total of 64 core samples were submitted for assay, and results are anticipated to be a significant catalyst for the program All 4 holes were designed to test targets based on plate models derived from the new VTEM survey that was flown over the Goodwin copper-nickel-cobalt project in January, 2026. The VTEM plate model for L1560 predicted a flat-lying conductor of moderate (120 siemens) conductance at a vertical depth of 132.8 meters. This correlates with massive pyrrhotite seams drilled in hole GW25-26. From a total of 432 anomalies, the Company has constructed plate models for 24 conductors that range in depth from 30 meters to 320 meters. All of these models are potential extensions to the known zones of mineralization and could represent potential ovoid-type deposits with higher-grade mineralization at depth. The Goodwin copper-nickel-cobalt project covers 14,000 hectares (35,000 acres) in the mineral-rich Bathurst Mining Camp (‘BMC’) of New Brunswick, Canada. Duyuru • May 30
Slam Exploration Ltd Drills 18 Meter Mineralized Vein System Along Strike from Channel Sample Grading 40.50 G/T Gold over 0.40M At Jake Lee Gold SLAM Exploration Ltd. drilled quartz and quartz-calcite veining with pyrite, arsenopyrite and chalcopyrite mineralization in all 5 holes drilled on its wholly owned Jake Lee Project. The Jake Lee project is located 25 kilometers southeast of the Clarence Stream gold deposit operated by Galway Metals Inc. in New Brunswick, Canada. Holes JL26-01, JL26-02, and JL26-03 successfully intersected quartz veining with visible pyrite-arsenopyrite-chalcopyrite mineralization typically associated with gold occurrences. These holes were designed to test the potential continuation below channel samples grading up to 40.5 g/t gold and 63.30 g/t silver over 0.40 meters. The channel samples were sawn across the No. 1 gold vein as reported in a news release dated January 14, 2026 after the new gold discovery by SLAM in 2025. Deeper intercepts of mineralized quartz and quartz-carbonite vein systems occur in holes JL26-04 and 05. These include an 18-meter zone of quartz veining from 70.90 to 89.00 meters with chalcopyrite-arsenopyrite-pyrite mineralization and a 17-meter zone of quartz veining from 129.50 to 146.5 meters with chalcopyrite-arsenopyrite-pyrite mineralization. These holes were drilled to test soil geochemical anomalies ranging from 0.021 g/t gold to 0.246 g/t gold located 300 meters and 500 meters northeast of the No. 1 vein. The geochemical anomalies coincide with a geophysical aeromagnetic low and a linear topographic feature that highlight a potential correlation with the No. 1 gold vein. A total of 197 samples have been sawn from the drill cores and have been submitted to ActLabs in Fredericton, New Brunswick for gold assays and ICP analyses. Hole JL26-01 from 15.10 to 18.50 meters intersected 3.40 meters of quartz veins with pyrite, arsenopyrite, chalcopyrite. Hole JL26-02 from 25.80 to 28.30 meters intersected 2.50 meters of quartz veins with pyrite, arsenopyrite, chalcopyrite. Hole JL26-03 from 16.50 to 19.30 meters intersected 2.80 meters of quartz veins with arsenopyrite, chalcopyrite, pyrite. Hole JL26-03 from 29.30 to 31.00 meters intersected 1.70 meters of quartz-calcite veins with pyrrhotite, pyrite. Hole JL26-04 from 14.00 to 16.90 meters intersected 2.90 meters of quartz-calcite veins with pyrrhotite, pyrite. Hole JL26-04 from 123.60 to 128.20 meters intersected 4.60 meters of quartz-calcite veins with pyrrhotite, pyrite. Hole JL26-04 from 128.20 to 132.7 meters intersected 4.50 meters of quartz-calcite veins with chalcopyrite, arsenopyrite, pyrite. Hole JL26-05 from 34.70 to 44.00 meters intersected 9.30 meters of quartz-calcite veins with chalcopyrite, arsenopyrite, pyrite. Hole JL26-05 from 70.90 to 89.00 meters intersected 18.10 meters of quartz-calcite veins with chalcopyrite, arsenopyrite, pyrite. Hole JL26-05 from 129.50 to 146.50 meters intersected 17.00 meters of quartz veins with chalcopyrite, arsenopyrite, pyrite. Hole JL26-05 from 174.00 to 176.55 meters intersected 2.55 meters of quartz-calcite veins with pyrrhotite, pyrite. Hole JL26-05 from 186.75 to 189.20 meters intersected 2.45 meters of quartz veins with chalcopyrite, pyrrhotite, pyrite. In conjunction with the drilling program, the Company completed 9 trenches to test gold soil anomalies ranging up to 0.466 g/t gold associated with airborne conductors and aeromagnetic anomalies up to 800 meters northeast of the No. 1 gold vein. A total of 39 samples were collected from the trenching program and submitted to ActLabs in Fredericton, New Brunswick for gold assays and ICP analyses. The Company drilled 10 holes in the 2025 diamond drilling campaign on the Goodwin copper-nickel-cobalt project. This followed significant copper, nickel and cobalt intercepts from 15 diamond drill holes reported by the Company in 2024. These include a 64.90 meter core interval grading 0.73% copper, 0.64% nickel and 0.05% cobalt for 2.19% copper equivalent, including 1.32% copper, 1.11% nickel and 0.09% cobalt for 3.84% copper equivalent over a 31.20 meter core interval from hole GW24-02 as reported in a news release August 7, 2024. Significant gold values were also reported with up to 3.31 grams per tonne over 0.5 meters in hole GW24-01. The Company intends to return to the Menneval gold project for additional drilling in 2026. Targets include the Maisie vein where the Company previously drilled up to 56.90 g/t gold over 0.5 meters and the No. 18 vein where the Company drilled 162.5 g/t gold over 0.2 meters. Duyuru • Mar 13
Slam Exploration Ltd. announced that it has received CAD 2.07275 million in funding On February 20, 2026, the company amended the terms of the transaction. The company will now raise gross proceeds of CAD 2,072,749.77 and will issue Up to 18,141,664 flow-through CMETC units at a price of CAD 0.09 per FT CMETC Unit for gross proceeds of CAD 1,632,749.76 and Up to 3,000,000 flow-through units at a price of CAD 0.09 per FT Unit for gross proceeds of CAD 270,000 and Up to 1,888,889 non-flow-through units of the Company issued at a price of CAD 0.09 per NFT Unit for gross proceeds of CAD 170,000.01. The Company has issued 420,000 finder warrants (the “Finder Warrants”) and paid CAD 37,800 in cash in connection with the Offering. Each whole Finder Warrant will entitle the holder to purchase one additional Common Share at an exercise price of CAD 0.13 per Common Share for a period of two (2) years following the closing date of the Offering, subject to acceleration in certain events. One Company insider participated in the Offering, paying CAD 199,999.87 for
2,222,222 FT CMETC Units. Duyuru • Feb 19
Slam Exploration Ltd. announced that it expects to receive CAD 1.17 million in funding Slam Exploration Ltd. announces a non-brokered private placement to issue 12,500,000 flow-through CMETC units at a price of CAD 0.09 units for proceeds of CAD 1,125,000 and 500,000 non-flow-through units at a price of CAD 0.09 per unit for proceeds of CAD 45,000 for aggregate proceeds of CAD 1,170,000 on February 18, 2026. Each FT CMETC unit will comprise of One flow-through common share of the company issued as a flow-through share and One-half of one common share purchase warrant, with two such half warrants being exercisable together as one whole common share purchase warrant. Each NFT unit will comprise of One common share of the company and One warrant. Each whole warrant will entitle the holder to purchase one additional common share at an exercise price of CAD 0.13 per common share for a period of two years following the closing date of the offering. The offering is subject to the acceptance of the TSX Venture Exchange and all other required regulatory approvals. All securities issued under the offering will be subject to a statutory hold period of four months and one day from the closing date of the offering in accordance with Canadian securities laws. Finders' fees may be payable in connection with the offering in accordance with the policies of the TSX Venture Exchange. Insiders of the company may participate in the offering. 
