Tillkännagivande • Oct 10
Anortech Expands High-Purity Anorthosite Footprint At Gronne Bjerg Project in Greenland Anortech Inc. announced exceptional results of the 2025 field program on the Gronne Bjerg Anorthosite Project in Greenland. The program significantly expands the mapped size of the project and further confirms its potential as one of the world's most promising long-term sources of high purity, aluminum-bearing rock. This year's exploration focused on the mapping and sampling of previously unexplored areas of the Gronne Bjerg anorthosite complex. Results confirm the addition of continuous high purity anorthosite extending over 3.2 km in strike length, free from significant alteration or diking. Highlights include: Defined a 3.2 km surface extension of high purity anorthosite expanding the mapped footprint to 4.2 km x 2.3 km, with anorthosite exposed from sea level to 1,200 m elevation at the top of the mountain. Collected 30 representative samples from outcrop, analyzed by ALS (Ireland), returning average assays as follows: Al2O3: 31.9% Fe2O3: 0.94% Na2O: 1.8% CaO: 16.7% SiO2: 47.2% The consistently high purity and high-aluminum grades make Gronne Bjerg an ideal feed material for E-glass, sustainable aluminum applications and CO2 free cement. Environmental and Infrastructure Progress: Environmental Baseline Studies: WSP Denmark completed the second year of environmental baseline studies, including marine, terrestrial, and wildlife surveys. Combined with 2024's program data, these studies form the foundation for the project's Environmental Impact Assessment (EIA), which the Company expects to complete ahead of its 2026 exploitation license application. Port Access: Initial bathymetry studies have identified a potential deep-water port site only a few hundred meters from the potential mining area. This offers a unique logistical advantage, expected to reduce capital costs while minimize the project's environmental footprint. Tillkännagivande • Oct 08
AnorTech Inc., Annual General Meeting, Dec 02, 2025 AnorTech Inc., Annual General Meeting, Dec 02, 2025. Location: british columbia, vancouver Canada Tillkännagivande • Jun 04
AnorTech Inc. Announces Positive Results from Sustainable Cement R&D Program AnorTech Inc. announced the successful completion of the latest phase of its research and development (R&D) program focused on producing sustainable cement products using anorthosite from the Company's Gronne Bjerg Project in Greenland. The program, conducted by the Danish Technological Institute (DTI) in Copenhagen, focused on three high-pot potential product lines: Very low CO2 refractory cement, 3D printable anorthosite cement-based mortar formulations, and Very low CO2 concrete niche applications. DTI's testwork utilized 100% anorthosite in various size fractions, mixed with phosphoric acid (H3PO4) at varying concentrations to produce materials that were tested for performance across multiple applications. Fresh and mechanical properties were also evaluated to assess commercialization potential. Unlike Ordinary Portland Cement (OPC), AnorTech's process does not require clinker production, which emits approximately 0.9 tonnes of CO2 per tonne of OPC. As a result, AnorTech's cement applications can eliminate approximately 90% of CO2 emissions. Refractory Cement Testwork Highlights: Successfully cast anorthosite mortar prisms that withstanding multiple heating cycles at 1,200 degC for five hours without compromising structural integrity; Compressive strength was maintained, or even slightly increased, after thermal heating cycles with post-treatment strength exceeding 25.0 MPa; Two large slabs (10cm thick) were cast for extended refractory testing. One will be cut in half, with one half exposed to outdoor weathering for one year to assess long-term strength and microstructures evolution. 3D Printable Cement Testwork Highlights: More than 20 formulations were tested to determine the optimal mix for printability and structural buildability; The addition of viscosity-modifying admixture enhanced print quality and control; The program successfully printed multiple 3D structures, confirming proof of concept. Tillkännagivande • Feb 12
AnorTech Files Provisional Patent for Sustainable Smelter Grade Alumina Production ANORTECH INC. announced that it has filed a provisional patent with the United States Patent and Trademark Office for its innovative process to produce sustainable smelter-grade alumina (SGA) from anorthosite (calcium aluminum silicate) with zero waste. AnorTech’s proprietary process meets the specifications of the major aluminum producers while eliminating tailings. The only byproducts of amorphous silica and calcium silicate are fully saleable. The patent application covers key innovations including iron reduction, aluminum chloride hexahydrate precipitation, and calcination. The aluminum industry currently depends on SGA derived from bauxite ore for aluminum production. The bauxite ore is processed using the Bayer process and in 2023 this yielded over 125 Mt/a of alumina (Al2O3), most of which was converted into aluminum metal using the Hall–Héroult smelting process. However, in 2023 this method also generated more than 175M tonnes of caustic red mud tailings, a major environmental challenge. The Company has delivered 25 tonnes of crushed anorthosite from its 100% owned Gronne Bjerg anorthosite project in Greenland to Ontario, Canada, in preparation for the pilot plant testing. AnorTech is also exploring partnerships with industry leaders to accelerate the commercialization of its technology. Tillkännagivande • Aug 28
AnorTech Inc., Annual General Meeting, Oct 30, 2024 AnorTech Inc., Annual General Meeting, Oct 30, 2024. Location: british columbia, vancouver Canada Tillkännagivande • Jun 02
Hudson Resources Inc. Announces Results from Initial Sampling At the Gronne Bjerg Anorthosite Project and Commencement of Green Alumina Testwork Hudson Resources Inc. provided initial sampling results on the Company's 100% held Gronne Bjerg (Green Mountain) anorthosite project ("Project") in Greenland. The Company has also commenced testwork to produce a green alumina for the aluminum industry. Hudson is continuing to support Neo North Star Resources Inc. in its development of the Sarfartoq REE project where the Company has an interest. The Gronne Bjerg project, which was staked by Hudson in 2021, is approximately 80 km from Nuuk, the capital of Greenland, and favourably located on open tidewater. Hudson first sampled the Gronne Bjerg project in 2012 as part of a regional sampling program to identify the highest quality anorthosite targets in Greenland. This initial high-level sampling provided the best results of all anorthosites sampled, however the area was not available for staking at the time. In the fall of 2022, Hudson conducted a reconnaissance program at Gronne Bjerg which included the collection of 29 samples from outcrop over an area of 3.9 square kilometers. The samples were sent to ALS Laboratories in Canada for analysis and the results demonstrated a high aluminum content, low impurities, and excellent continuity over the area sampled. The average analysis for key elements for all the samples are as follows: Al(2) O(3) (al aluminum oxide): 32.06%; SiO(2) (silicodioxide): 47.24%; CaO (calcium oxidede): 14.98%; Na(2) O (sodium oxide): 2.27%; Fe(2) O(3). Based ot the high chemical quality of anorthosite sampled, Hudson has initiated a testwk program at SGS Lakefield in Canada to produce a green waste-free smelter grade alumina utilizing the flowsheet developed by the Company from 2013 through 2015. This significant testwork culminated in a robust Preliminary Economic Assessment (PEA) for specialty alumina production. The PEA demonstrated that a quality alumina product can be made while producing zero tailings and only useful by-products, compared to bauxite which produces almost four tonnes of caustic tailings per tonne of aluminum. The SGS testwork program will take approximately four months to complete with the objective of producing green alumina suitable as a feed material for aluminum producers. The Company is in discussions with industrial and technology groups to potentially partner on green alumina and green cement projects. This aligns perfectly with Hudson's core values in the creation of green products that they believe will attract ESG investors. Green Aluminum Hudson strongly believes that anorthosite is the future for green aluminium production which will increasingly be demanded by consumers. Global aluminum demand is expected to increase by almost 40 per cent by 2030 (CRU Report, May 2022). A recent World Bank report described aluminum as crucial for the energy transition as the metal is critical to solar power panels and electric vehicles. The amount of aluminum used in European cars increased by 18% from 174kg in 2019 to 205kg in 2022 according to automotive consultancy Ducker Carlisle (Mining.comMay 2023). The report predicts this trend will continue to increase to 256kg per vehicle by 2030. China currently accounts for 58% of global output of aluminum. Europe has traditionally relied on Russia for aluminum supply.CO2 Free Cement In 2016/2017 Hudson completed successful testwork to produce a CO2 free, heat resistant (refractory) and acid resistant white cement (see NR2018-01). The work was carried out at the University of British Columbia Ceramics and Refractories Research and Testing Laboratory. Hudson plans to commence additional testwork on cement application in 2023 and is in discussions with a number of research facilities capable of executing a testwork program.Neo North Star Resources Inc. As recently announced (see NR2023-01), Hudson has a potential 5% carried interest in the Sarfartoq REE project in Greenland partnered with Neo North Star Resources Inc. (NNSR), controlled by Neo Performance Materials. NNSR has commenced a significant field program at Sarfartoq REE project for 2023. 
