Tillkännagivande • Jul 02
Vision Marine Technologies Files U.S. Patent Application for Dual-Mode Electric Outboard Trim Control Vision Marine Technologies Inc. announced the filing of a new U.S. patent application relating to dual-mode trim-control technology for electric outboard propulsion systems. The filing is directed to supporting trim operation from both local outboard-side controls and compatible vessel-side electronic control systems. The application addresses practical operating scenarios in which boat owners, manufacturers, dealers and service technicians may need to adjust the position of an outboard during trailering, launching, docking, storage, commissioning or maintenance, including under vessel power states in which full propulsion-system activation may not be desired. The disclosed technology is directed to improving the integration of trim functionality within an electric outboard architecture while supporting operator convenience, serviceability and power-management objectives. The new filing expands Vision Marine's intellectual-property work surrounding the E-Motion™ high-voltage electric marine propulsion platform. The E-Motion™ platform was engineered specifically for marine applications and integrates the electric motor, high-voltage battery architecture, power electronics, cooling systems, controls, safety systems and digital helm interface required for high-performance electric boating. The proposed trim-control technology is intended to complement this system-level approach by incorporating a familiar outboard function within the broader electric propulsion and vessel-control architecture. The filing adds to Vision Marine's portfolio of patent applications and intellectual-property work relating to the E-Motion™ platform, including propulsion controls, outboard integration, power management, cooling systems, safety functions, fault detection, component authentication and secure vessel communications. Vision Marine has industrialized its 180 HP high-voltage E-Motion™ propulsion system for marine applications, has previously disclosed integrations across more than 25 boats across 13 recreational boat brands, and set a 116 mph electric boat speed record in 2023. The Company continues to develop and seek protection for marine-specific technologies related to the integration, servicing and practical operation of its electric propulsion systems. The patent application is pending and remains subject to examination by the United States Patent and Trademark Office. No assurance can be given regarding the scope, timing or outcome of any pending patent application. Tillkännagivande • Jul 01
Vision Marine Technologies Delivers and Accepts Electronic Control Unit Assemblies for E-Motion High-Voltage Electric Marine Propulsion Platform Vision Marine Technologies Inc. announced the delivery and acceptance of electronic control unit assemblies manufactured by Circuits Central Inc. for use within the Company's E-Motion high-voltage electric marine propulsion platform. Circuits Central has completed and delivered ECU assemblies supporting ten E-Motion powertrains. Vision Marine has completed incoming inspection of the delivered assemblies, which have been accepted for use within the Company's E-Motion production and integration activities. The completed production work forms part of Vision Marine's ongoing system-level engineering and technology-development initiatives across the E-Motion platform. High-voltage marine propulsion requires the coordinated performance of mechanical, electrical, thermal, software and control-system components in demanding on-water conditions. The ECU architecture supports critical control, communications and monitoring functions within that broader system. Utilizing specialized electronics manufacturing capability for critical control-electronics assemblies is intended to support more consistent component production, testing, traceability and integration across different vessel configurations. Circuits Central is an established electronics manufacturing and product-development services provider with more than 25 years of experience in printed circuit board manufacturing and assembly, prototyping, testing and quality assurance. The company states that it has supported customers ranging from technology startups to established S&P 500 companies and supports projects from prototype development through production runs exceeding 10,000 units. Circuits Central also states that its processes align with ISO and IPC industry guidelines. Vision Marine has developed E-Motion as a purpose-built high-voltage propulsion platform for marine applications. The Company has previously disclosed E-Motion integrations across more than 25 boat platforms and 13 boat brands, including pontoon, catamaran, center-console and bowrider applications. Circuits Central's manufacture of ECU assembly's forms part of Vision Marine's broader effort to advance E-Motion through component validation, production-process refinement, OEM integration and service development. Together with the Company's engineering activities, manufacturer relationships and Nautical Ventures retail and service platform, these initiatives are intended to reinforce the technical and operational foundation supporting the continued deployment of E-Motion-equipped boats. Tillkännagivande • Jun 24
Vision Marine Technologies Receives Uspto Notice of Allowance for Electric-Vessel Powertrain Authentication Technology Vision Marine Technologies Inc. has received a Notice of Allowance from the United States Patent and Trademark Office for its U.S. patent application titled, "Authentication of One or More Powertrain Components of an Electric Vessel." The Notice of Allowance indicates that the USPTO has examined the application and determined that it is allowable. The application is among the earlier patent applications in Vision Marine's portfolio to receive a Notice of Allowance and represents progress in the Company's intellectual-property program for high-voltage electric marine propulsion. The allowed application relates to the authentication of one or more components within an electric-vessel powertrain. A high-voltage marine propulsion system brings together the propulsion motor, power electronics, battery systems, power-distribution equipment, vessel controls and related electronic components. The application addresses component authentication within that integrated operating environment. Vision Marine's intellectual-property portfolio also includes issued U.S. patents and multiple additional U.S. patent applications pending. The pending applications relate to elements of high-voltage electric marine propulsion, including battery architecture, power distribution, propulsion controls, cooling systems, mechanical integration, communications and vessel-level operating systems. For investors, the Notice of Allowance marks a clear progression beyond a patent filing: the application has been examined and found allowable by the USPTO. Any U.S. patent that issues from the application will provide protection defined by the claims granted by the USPTO. Tillkännagivande • Jun 20
Vision Marine Technologies Inc. Announces Retirement of Founder Roger Moore, Effective June 18, 2026 Vision Marine Technologies Inc. announced the retirement of Roger Moore, founder of Nautical Ventures Group Inc., effective June 18, 2026. Mr. Moore retired from his executive responsibilities and day-to-day management following the completion of the integration phase associated with Vision Marine’s acquisition of Nautical Ventures in June 2025. Mr. Moore’s retirement concluded a distinguished career spanning decades in the U.S. marine industry, during which he built Nautical Ventures into one of North America’s most recognized and respected marine dealership organizations. Founded by Mr. Moore, Nautical Ventures evolved from a single-location operation into a premier Florida-based marine enterprise encompassing dealership operations, marina facilities, service infrastructure, financing capabilities, rentals, boat clubs and innovative marketing platforms. During its development, the organization expanded to 13 locations and established relationships with many of the marine industry’s leading manufacturers. In 2024, Nautical Ventures was named the No. 1 dealer in Boating Industry’s Top 100 Dealers ranking in the United States. Following Vision Marine’s acquisition of Nautical Ventures, Mr. Moore played a key role in supporting the transition while helping preserve the customer relationships, manufacturer partnerships and operational foundation that contributed to the company’s long-standing success. As part of the next phase of operations, Nautical Ventures will continue to be managed by its existing operational leadership team under the strategic oversight of Vision Marine’s executive leadership. Clement Magot, General Manager of Nautical Ventures, and Matthew Andrews, General Manager of Nautical Ventures, will continue overseeing day-to-day operations, sales execution, customer experience and operational performance across the Nautical Ventures platform. Mr. Magot brings prior marine sales leadership experience from Groupe Beneteau, while Mr. Andrews brings prior industry experience from Denison Yachting and supports financing, transaction processing and customer delivery coordination. As part of this transition, effective June 18, 2026, Mr. Moore has stepped down from all executive responsibilities and will not hold any executive, board or shareholder position within Vision Marine Technologies. The Company anticipated that Mr. Moore may provide limited advisory support from time to time, as requested, to assist with continuity of certain strategic relationships and initiatives. New Risk • Jun 17
New major risk - Share price stability The company's share price has been highly volatile over the past 3 months. It is more volatile than 90% of American stocks, typically moving 18% a week. This is considered a major risk. Share price volatility increases the risk of potential losses in the short-term as the stock tends to have larger drops in price more frequently than other stocks. It may also indicate the stock is highly sensitive to market conditions or economic conditions rather than being sensitive to its own business performance, which may also be inconsistent. Currently, the following risks have been identified for the company: Major Risks Share price has been highly volatile over the past 3 months (18% average weekly change). Earnings have declined by 14% per year over the past 5 years. Shareholders have been substantially diluted in the past year (over 54x increase in shares outstanding). Market cap is less than US$10m (US$407.3k market cap). Tillkännagivande • Jun 04
Vision Marine Technologies Advances E-Motion™ Power Distribution Unit Manufacturability and Engages Contract Manufacturer to Support Production Planning Vision Marine Technologies Inc. had improved the manufacturability of the Power Distribution Unit used in its E-Motion high-voltage electric marine propulsion system and engaged a contract manufacturer to support production planning for the component. The PDU is a core component of the E-Motion high-voltage architecture, managing the distribution of electrical power between key system components. Vision Marine's recent manufacturability work is intended to further streamline production of the PDU and prepare the component for future production requirements as customer and OEM programs develop. The Company has also engaged a contract manufacturer to support production planning and manufacturing readiness for the PDU, while Vision Marine maintains control over system architecture and marine-specific engineering requirements. The enhanced PDU architecture also supports Vision Marine's broader charging roadmap. E-Motion currently includes an integrated onboard charger that allows boaters to charge from commonly available dockside shore-power outlets. This approach remains important for everyday use within existing marina environments. At the same time, the Company is evaluating how the E-Motion architecture may support future compatibility with fast-charging infrastructure where available, which may be relevant for higher-use applications such as commercial operators, boat clubs, rental fleets and marina-based operations. Together with the ongoing validation of its refined Octillion battery packs, the PDU manufacturability work is intended to support a more production-ready E-Motion architecture. Vision Marine has not announced commercial availability of fast-charging functionality, and any future higher-output charging capability remains subject to engineering validation, battery and PDU compatibility, infrastructure availability, safety requirements and commercialization decisions. Vision Marine intends to continue advancing the E-Motion platform through component manufacturability, battery integration, charging compatibility, data, diagnostics, display and service-related development initiatives designed to improve system functionality, support OEM integration and enhance the customer experience. 
