Tillkännagivande • Jul 10
Aurbis Resources Corp. Completes High-Definition Magnetic Survey and Remote Sensing Activities on Ecru Gold Project in Nevada Aurbis Resources Corp. completed several remote sensing activities on its 100% owned Ecru Gold Project, in Lander County, Nevada. A high-definition magnetic survey with 50m x 50m line spacing was completed over the Ecru project to support the growing dataset being compiled for the project. The magnetic data is currently being processed and interpreted by Fathom Geophysics, and deliverables will include a 3D model of the dataset and structural interpretations. The identification of hornfels alteration (announced 17 June 2026) is a significant geological advancement for the project, and the magnetic interpretation will help identify the final drill targets associated with the hornfels alteration. Hornfels alteration is closely associated with the Robertson-Style intrusion-related gold mineralisation. In addition to the magnetic survey, LiDAR and photogrammetry surveys were also completed on Ecru. These will assist in identifying historical workings and other surface anomalies, adding another layer of data to the project. Accurate elevation data will allow optimal processing of the 100m x 100m-spaced gravity data, which is also currently being interpreted by Fathom Geophysics. A follow-up mapping program is planned for the Ecru project and will provide more detail in high-priority areas already identified. It will also expand the mapped area to include all outcrops on the project. The geochemistry from both mapping phases will be a critical dataset for the final drill design. The High-definition magnetic survey completed on the Ecru Gold Project comprised 50m x 50m line spacings and was flown at 30m above the ground in a north-to-south orientation. The survey was designed to be close-spaced and deliver high-definition results because the magnetic signature expected from Robertson-Style “hornfels/skarn reduced intrusion-related” gold mineralisation is likely to be subtle, and the increased data density will give more detail. Aurbis expects to see a subtle magnetic signature (rather than a strong or high-contrast one) due to the mineralogy (Ilmenite) of the Tenabo stock, which hosts the Robertson deposit. Given Ecru's proximity to Robertson, the Ecru intrusion will likely share this host mineralization. Unlike magnetite-bearing intrusives (which produce strong, high-contrast magnetic datasets), ilmenite-series intrusions are characteristically low in magnetic susceptibility. and express as a subdued magnetic anomaly relative to surrounding rocks. Aurbis interprets this as a key feature of reduced intrusion-related gold systems globally and expects to see this magnetic characteristic at Ecru. The magnetic dataset acquired by Aurbis is currently being interpreted by Fathom Geophysics. Deliverables will include a structural interpretation of the data and a 3D model of the magnetic dataset to assist in understanding the depth to the target. Aurbis identified a detailed 100m x 100m gravity dataset over the Ecru project area, which was collected by S2 Resources (ASX announcement: 25 September 2019). Aurbis has commissioned Fathom Geophysics to process and interpret the gravity dataset along with the newly acquired magnetic data to assist in target identification and delineation. As with the magnetic dataset, the gravity anomaly anticipated at Ecru will likely be a subtle gravity high. The emplacement of the Robertson intrusion resulted in contact metamorphism of the host siliciclastic rocks, forming a contact aureole up to 1 km from the intrusion, within which hornfels alteration occurred. Hornfels alteration generally increases density, which can produce a subtle gravity high relative to the surrounding lower-density host rocks. The strong hornfels alteration identified during the first phase of mapping and announced by Aurbis on the 17th of June is critical to the discovery potential of gold mineralisation on Ecru. The ore deposits within the Tenabo district (including Robertson) surrounding the Ecru project can be broadly characterized as hornfels/skarn systems associated with reduced intrusion-related systems within the Tenabo pluton. The mineralization style of Robertson, and therefore the target style at Ecru, is the hornfelsed zone associated with the contact aureole of a reduced intrusion. Hornfels is a significant and well-documented indicator characteristic at the Robertson deposit, and Gold mineralisation at the Robertson Gold Deposit is associated with the contact metamorphism of the host rocks into hornfels, within a 1km aureole from the stock. The hornfels zone identified during the mapping phase is a defining characteristic of this type of gold mineralisation, and its increased density characteristics will be used to identify buried targets in the gravity dataset, relative to the mapped zones. In addition to the activities described above relating to magnetic and gravity datasets, Aurbis also completed LiDAR and photogrammetry surveys over the Ecru Gold Project, which will be incorporated into the full data suite and assist with data analysis and target identification. Given the importance of the Hornfels alteration to Robertson-Style gold mineralisation, the Company will conduct a second phase of mapping and sampling on the Ecru Gold project. This second phase will focus on identifying any additional hornfels-altered areas and mapping all remaining outcrop areas. Just like the first phase of mapping, samples will be collected and sent for assay analysis. The geochemical results for all rock samples are expected to be received about 6 weeks after submission and will be vital to the final drill target identification. The results of the Magnetic and Gravity data interpretation are highly anticipated by Aurbis and will directly influence the final geophysical step before final drill design: a targeted IP survey to identify specific conductive, sulphide-bearing areas associated with the hornfels zones and geochemical target areas. Tillkännagivande • Jun 18
Aurbis Resources Corp. Announces the First Phase of Mapping and Rock Sampling Has Been Completed on the Ecru Gold Project Aurbis Resources Corp. announced that the first phase of mapping and rock sampling (P1) has been completed on the Ecru Gold Project, held by Aurbis Resources in Lander County, Nevada. The mapping project identified several Robertson-Style characteristics in an area interpreted as the contact aureole of the Ecru intrusion. These characteristics included areas of intense hornfelsing, brecciation, and silicification, all of which are associated with the Robertson-Style intrusion-related gold mineralisation. Robertson-Style mineralization is named for the Robertson deposit just 2 km away from Ecru. This 2.7- million-ounce gold discovery was acquired by Barrick in 2017 and is now headed to production under Nevada Gold Mines (Barrick/Newmont) within the famed Cortez Complex, one of the richest gold trends in the world. The P1 mapping program focused on the southwestern portion of the Ecru project, where outcrop exists. About 150 rock samples were also collected during this phase of work and will be submitted to the analytical laboratory in Reno, Nevada. The mapping and sampling program is aimed to better understand the alteration assemblage of the Ecru Gold Project in relation to the Robertson-Style intrusion-related gold mineralisation. The rock samples will undergo the full mineral suite analyses to support the visual geological mapping interpretations with geochemical data. The program data is being compiled and will be reviewed alongside the sample results. It is likely that a second phase of mapping and rock sampling will be undertaken in the near future. A field mapping and outcrop sampling program was completed on the southwestern portion of the Ecru property, and about 100 rock chip samples were collected. The aim of the mapping and sampling program was to better understand the distribution of alteration assemblages on Ecru, particularly in relation to the interpreted intrusion identified by magnetic surveys. A roughly north-striking fault divides the mapped area into two distinct zones. On the west of the fault, fine grey sandstone of the Elder formation is weakly altered and west-dipping. East of the fault, the rocks are intensely altered and south-dipping. East of the fault, a long exposure of brecciated, hornfelsed, interbedded Elder formation shows evidence of multiple phases of brecciation, where coarse, blocky collapse breccias are cut by strongly silicified, hydrothermal breccia. This hydrothermal breccia style was observed across multiple units over a wide area. Board Change • May 20
Less than half of directors are independent Following the recent departure of a director, there are only 2 independent directors on the board. The company's board is composed of: 2 independent directors. 3 non-independent directors. Independent Director Ed Low was the last independent director to join the board, commencing their role in 2023. The company's minority of independent directors is a risk according to the Simply Wall St Risk Model. Tillkännagivande • Mar 05
Québec Nickel Corp. announced that it expects to receive CAD 1 million in funding Québec Nickel Corp. announced a non-brokered private placement of 4,000,000 units at a price of CAD 0.25 per unit for gross proceeds of up to CAD 1,000,000.00 on March 4, 2026. Each unit will consist of one Common Share And One Common Share Purchase Warrant. Each warrant will entitle the holder to acquire one additional common share at an exercise price of CAD 0.40 for a period of two years from the date of issuance. The offering is subject to customary conditions, including approval of the Canadian securities exchange and other required regulatory approvals. All securities issued pursuant to the offering will be subject to a statutory hold period of four months and one day in accordance with applicable securities laws. The company may pay finders’ fees in connection with the offering in accordance with applicable securities laws and exchange policies. Tillkännagivande • Jan 17
Québec Nickel Corp. announced that it has received CAD 0.5 million in funding On January 16, 2026, Québec Nickel Corp. closed the transaction. The company issued 4,000,000 units at a price of CAD 0.125 per Unit for gross proceeds of CAD 500,000. Each Unit consists of one common share of the Company and one-half of one common share purchase warrant. Each whole warrant is exercisable to acquire one additional common share of the Company at an exercise price of CAD 0.225 per share for a period of two years from the date of issuance. The Units were issued pursuant to applicable prospectus exemptions, including the family, friends and business associates exemption, the accredited investor exemption, the existing security holder exemption under British Columbia Instrument 45-534, and equivalent exemptions under applicable Canadian securities laws. In connection with the Offering, the Company paid aggregate cash finder’s fees of CAD 4590.00 in accordance with the policies of the Canadian Securities Exchange and applicable securities legislation. No securities were issued as finder’s compensation. All securities issued in connection with the Offering are subject to a statutory hold period under applicable Canadian securities laws, expiring four months and one day from the date of issuance. The Offering remains subject to final acceptance of the Canadian Securities Exchange. Tillkännagivande • Jul 16
Québec Nickel Corp., Annual General Meeting, Sep 12, 2025 Québec Nickel Corp., Annual General Meeting, Sep 12, 2025. Location: british columbia, vancouver Canada Tillkännagivande • Nov 14
Québec Nickel Corp. announced that it has received CAD 0.25 million in funding On November 13, 2024, Québec Nickel Corp. closed the transaction. The company announced that it has issued 2,000,000 units at a price of CAD 0.125 per unit for gross proceeds of CAD 250,000. No finders' fees were payable in connection with the offering. No directors or officers participated in the offering. Tillkännagivande • Oct 26
Québec Nickel Corp. announced that it expects to receive CAD 0.25 million in funding Québec Nickel Corp. announces a private placement offering of 2,000,000 units at a price of CAD 0.125 per unit for gross proceeds of CAD250,000 on October 25, 2024. Each Unit comprises of one common share nd one-half of one share purchase warrant exercisable for a period of two years. Each whole Warrant is exercisable into one Share at a price of CAD 0.225 per Share. No finder’s fees will be payable in connection with the Offering. The Offering is subject to approval of the Canadian Securities Exchange. Securities issued under the Offering will be subject to a hold period which will expire four months and one day from the date of closing of the Offering. Tillkännagivande • Jul 16
Québec Nickel Corp., Annual General Meeting, Sep 12, 2024 Québec Nickel Corp., Annual General Meeting, Sep 12, 2024. Location: suite 1100, 1111 melville street, british columbia, v6e 3v6, vancouver Canada Tillkännagivande • Feb 03
Québec Nickel Corp. Reports Metallurgical Test Program Results from the Fortin Sill Zone at its 100% Owned Ducros Project Near Lebel-Sur-Quévillon, Québec Québec Nickel Corp. announced results from the metallurgical test work program completed on Ni-Cu-PGE-rich drill core from the Fortin Sill Zone at its 100% owned Ducros Project near Lebel-sur-Quévillon, Québec. The objective of the scoping-level metallurgical program is to evaluate the amenability of the Fortin Sill Zone to produce saleable Critical Metals-bearing mineral concentrates. The metallurgical study was initiated in 2023 to follow-up on significant drilling results returned from the Fortin Sill Zone including 31.00 metres of 0.37% Ni, 0.40% Cu, 176 ppm Co and 0.55 g/t Pt-Pd-Auin hole QDG-22-09, 43.39 metres of 0.24% Ni, 0.25% Cu, 146 ppm Co and 0.35 g/t Pt-Pd-Au in hole QDG-22-28 and 11.80 metres of 1.44% Ni, 1,49% Cu, 461 ppm Co and 2.79 g/t Pt-Pd-Au in hole QDG-22-29. During the first half of 2023, the Company completed several dedicated HQ-diameter drill holes at the Fortin Sill Zone that supplied fresh material for the test work program. The metallurgical holes were designed to twin previously completed holes and targeted three styles and grades of Ni-Cu-PGE mineralization including: Low grade disseminated and blebby sulphide mineralization with a target average grade of 0.30% nickel + copper; Moderate grade blebby to heavily disseminated mineralization with a target average grade of 0.75% nickel + copper; High-grade net texture to semi-massive mineralization with a target grade of greater than 1.50% nickel + copper. From the metallurgical drilling, three 50-kilogram samples of Ni-Cu-PGE mineralized drill core, each representing one of the styles and target grades of mineralization, were collected and delivered to SGS Canada's Québec City laboratory for the study. Summary of Metallurgical Study Results: Upon preparing a master composite sample from the three variability samples, the four samples were subjected to a metallurgical test program which included amongst other protocols, comminution, floatation and environmental test work. The Bond ball mill grindability test (i.e. comminution), which is used to estimate net power requirements for a potential mill grinding circuit, was performed on the master composite sample. Results from this test show the Fortin Sill Zone rocks are "moderately soft". The results from the floatation test work program demonstrate that the mineralized rocks at theFortin Sill Zone are amenable to producing two distinct mineral concentrates, namely a high-grade copper + gold + palladium concentrate and a moderate grade nickel + cobalt + platinum concentrate. Copper grades ranging from 28.0 to 29.3% Cu at recoveries ranging from 89.2% to 92.9% were achieved from the four samples. The nickel concentrate grades were relatively low at about 5% Ni for the four samples tested. Nickel recoveries improved significantly from the batch tests and ranged from a low of 48.2% in the low-grade sample to 77.5% in the high-grade sample.A subsample of the combined tailings from the four locked cycle tests was submitted for basic environmental characterization including leachable metals and acid base accounting (ABA). Environmental characterization of the combined tails did not identify any notable leachable metalsbut found the sample to be possibly acid generating. Board Change • Dec 27
Less than half of directors are independent Following the recent departure of a director, there are only 2 independent directors on the board. The company's board is composed of: 2 independent directors. 3 non-independent directors. Independent Director Nominee Christine Petch was the last independent director to join the board, commencing their role in 2022. The company's minority of independent directors is a risk according to the Simply Wall St Risk Model. Tillkännagivande • Dec 13
Québec Nickel Corp. Completes 2023 Exploration Programs at Its Ducros Nickel-Copper-PGE Project Quebec Nickel Corp. reported the completion of its 2023 exploration programs at its 100% owned Ducros Property, located 85 kilometers northeast of Val-d'Or, Quebec. Summary of 2023 Work Programs & Results: Drilling of almost 18,000 metres in 50 holes across the Ducros Property; Scoping-level metallurgical study of Fortin Sill Zone Ni-Cu-PGE sulphides; Discovery of multiple large Ni-Co-bearing ultramafic intrusions Numerous new Ni-Cu-PGE targets identified through Artificial Intelligence targeting study; Start of project environmental baseline study work. 2023 Exploration Diamond Drilling: The 2023 drilling program tested a wide variety of prospective Ni-Cu-PGE targets across the entire Ducros Property. In total, 17,815 metres were completed in 50 holes at multiple target areas such as the Ducros Ultramafic Sill Complex (DUSC), the Ducros Sill Trend, the Q-Zone Target as well as at the greater Fortin Sill Zone area. Of note, and as previously announced, two large nickel + cobalt-bearing ultramafic intrusions were discovered at the Ducros Sill Trend and Q-Zone target earlier 2023. Tillkännagivande • Oct 21
Québec Nickel Corp., Annual General Meeting, Dec 19, 2023 Québec Nickel Corp., Annual General Meeting, Dec 19, 2023. Tillkännagivande • Oct 07
Quebec Nickel Corp. Reports the Results from an Artificial Intelligence Nickel-Copper-Pge Targeting Exercise At the Company's Ducros Claims Quebec Nickel Corp. reported the results from an Artificial Intelligence nickel-sulphide-focused targeting exercise at the Company's Ducros claims which has recently been completed by ALS GoldSpot Discoveries. The geological interpretation of the Ducros Property has been updated to help guide future exploration. In April 2023, QNI retained ALS GoldSpot Discoveries ("ALS GoldSpot") to undertake a comprehensive review and synthesis of the vast amount of exploration data collected at the Ducros Property to date, enhancing ongoing exploration efforts. The objectives of the study were two-fold: firstly, to generate meaningful nickel-sulphide -focused targets across the property using its proprietary SmartT TargetTM AI technology, and secondly, to use the new exploration data to reinterpret the geology underlying the Ducros claims. The unique fingerprint of the Ni-Cu-PGE Fortin Sill Zone was used to train the SmartT TargetTM targeting algorithms. This involved the integration and synthesis of multiple exploration datasets including the recently completed VTEMTM, airborne gravity, high-resolution drone magnetics and Lidar surveys, along with the data from two seasons worth of surface biogeochemical surveys and the Ducros diamond drilling assay, lithogeochemical and geotechnical databases. ALS GoldSpot used its Supervised Learning ("SL") and Semisupervised Learning ("SSL") algorithms on 25-metre and 10-metre datastacks during its study. Of note, several of the new nickel-sulphides, which are characterized as having a geophysical conductive response comparable to that of the Fortin Sill Zone, lie along strike of the Fortin Sill zone, immediately adjacent to the recently discovered Q-Zone, within the southern portion of the Ducros Ultramafic Sill Complex and along strike to the south of the Ducros Sill Trend. As part of the targeting exercise, several new non-conductive large-tonnage nickel-cobalt anomalies were also generated, similar in character to the Q-Zone and Ducros Sill Trend. In parallel with the AI targeting project, ALS GoldSpot also completed a litho-structural reinterpretation of the Ducros Property. Due to the relatively thick and consistent blanket of surface cover at the property, the new geological interpretation leans heavily on short wavelength airborne magnetic data in combination with the growing Ducros drillhole database. It is expected this new geological interpretation will greatly enhance the Company's exploration efforts going forward by allowing future work programs to focus on the most prospective Ni-Cu-PGE targets within the large >15,000-hectare Ducros property. As announced on August 9, 2023, the Company reports the program of exploration drilling and down-hole geophysics at the Fortin Sill target area continues as planned. The new drilling at Fortin Sill is focused on exploring for additional Ni-Cu-PGE sulphides down-plunge and along strike of the main outcropping mineralized showing. Up to 5,000 metres of drilling is planned for this phase of work, which will explore at depth beneath the Ni-Cu-PG E Zone as well as more than two kilometers of strike length of prospective geology. ALS GoldSpot offers unique processes to focus exploration efforts, minimize client risk related to exploration targeting, and optimize aspects of conventional resource exploration workflows. Its diverse geoscience and data science technical teams combine proprietary technology with in-depth expertise in mineral exploration, mineral resources, and mining to offer robust and actionable solutions to its clients and partners. While mineral exploration and mining have become data-rich environments, the value of data is lost when datasets become so large that they cannot effectively be integrated into decision making. Its expertise and solutions target such big data problems, processing or integrating underutilized data to better understand resource property potential. Tillkännagivande • Sep 13
Quebec Nickel Corp. Discovers New Large Nickel + Cobalt-Bearing Ultramafic Intrusion at Ducros Quebec Nickel Corp. reported drilling assay results from its Ducros Ni-Co-Cu-PGE project, located 85 kilometers northeast of Val-d'Or, Quebec. Results discussed herein come from multiple drill holes completed at the southern margin of the large 25 square kilometer Ducros Gabbro target this spring. The newly discovered nickel and cobalt-bearing ultramafic intrusion, now referred to as the "Q-Zone", has a surface geophysical footprint of approximately two square kilometers. Previous exploration conducted in the Q-Zone target area is limited to a single 145-metre-long hole drilled in57 that encountered mostly gabbroic rocks. In addition to this lone drill hole, Quebec Nickel completed a till sampling program during the spring of 2021 approximately two kilometers west of the Q-Zone target. Hole QDG-23-301 was collared to the test a portion of the southern lobe of the Q-Zone magnetic anomaly. The hole encountered a thick succession of intercalated mafic, ultramafic and sedimentary rock units with multiple narrow intervals of gabbronorite and serpentinized dunite. No significant assay results were returned from this hole. QDG-23-303 was drilled towards the northwest to test the southern lobe magnetic high and encountered ultramafic intrusive rocks throughout most of its 351-metre length (weakly to moderately serpentinized peridotite to dunite). Assay results for this hole include 0.17% nickel and 114 ppm cobalt over 322.77 metres and includes a 52.50 metre interval of 0.20% Ni + 115 ppm Co at the bottom of the hole. Hole QDG- 23-304 was collared approximately 800 metres northeast of QDG-23- 303 and was drilled towards the southeast to evaluate the margin of the Q-Zone central lobe magnetic anomaly. The 315-metre-long hole drilling through a mixed package of felsic to intermediate and mafic dykes, including quartz monzonite and gabbro until 242 metres depth after which the hole cored through 75 metres of mafic volcanic country rock. No significant assay results were return from this hole. QD Gabbro was directed towards the northwest to test the central lobe of the Q-Zone Magnetic high. After collaring in sedimentary rocks at 42 metres hole depth, QDG-23-306 encountered 40 metres of gabbro before cored a 475-metre-long interval of variably altered ultramafic rocks (dunite). Assay results from this hole are highlighted by 0.22% Ni + 122 ppm Co over the final 164.50 metres of the hole. Hole Q DG-23-307 was collared 275 metres northwest of QDG-23 - and also drilled towards the northwest to locate the contact between the ultramafic intrusion and surrounding host country rocks. Assays are pending for this hole however results are expected to be in-line with the results from the holes drilled immediately to the south. A drill section summarizing the results of holes QDG-23-304, 306 & 307 at the Q-Zone's central lobe magnetic high is shown as Figure 3 and a summary of all assay results from the Q-Zone drilling can be found below as Table 1. These drilling results in combination with the modeled geophysical fingerprint of the target area indicate the Q-Zone spans approximately two kilometres in a northeast-southwest direction by about one kilometer in width. Drill core is collected by Ducros Project personnel daily from the drill rigs and transported in secured core boxes to QNI's core logging facilities in Lebel-sur-Quevillon. Analysis for precious metals, and the Q-Zone targets are expected to be used to test the Q-Zone target area. Tillkännagivande • Aug 10
Québec Nickel Resumes Drilling At Fortin Sill Nickel-Copper-Pge Zone Québec Nickel Corp. announced the Company has resumed exploration at its Ducros Ni-Co-Cu-PGE project, located 85 kilometers northeast of Val-d’Or, Québec, including the start of drilling at the Fortin Sill Ni-Cu-PGE Zone. On June 6, 2023, the Company announced that due to an emergency order from the Québec Ministère des Ressources naturelles et des Forêts (Ministry of Natural Resources and Forests) prohibiting access to lands in the province impacted by forest fires, all field-based exploration activities were temporarily suspended at the Ducros Property (see June 6, 2023 News Release). In addition, all project personnel were relocated from the project’s base of operations in Lebel-sur-Quévillon to Val-d’Or upon receiving an evacuation notice on June 2. The work restriction order has since been lifted and the Company has resumed exploration activities at Ducros. Fortin Sill Zone Drilling: During the first half of 2023, exploration drilling by the Company focused on testing targets that require winter conditions to access and drill, notably in the central and western portions of the Ducros claims. Now that the fire related work restrictions have been lifted, exploration has resumed at the highly prospective Fortin Sill Zone where ground conditions allow for year-round access. New drilling at the Fortin Sill Zone will follow-up on some of the exceptional results achieved in 2022, including from hole QDG-22-29, which returned an 11.80 metre interval containing 1.44% Ni, 1.49% Cu, 461 ppm Co and 2.79 g/t Pt-Pd-Au that includes a higher-grade subinterval assaying 1.85% Ni, 1.65% Cu (3.50% Ni + Cu), 576 ppm Co and 3.27 g/t Pt-Pd-Au over 8.43 metres (see August 30, 2022 News Release for reference). Step-out drilling completed later in 2022 discovered additional nickel-copper-PGE mineralization down-plunge from the main sulphide zone including a 4.90-metre-long intercept averaging 0.77% Ni, 0.56% Cu, 340 ppm Co and 0.80 g/t Pt-Pd-Au which includes a higher grade three-metre-long subinterval of1.06% Ni, 0.77% Cu, 447 ppm Co and 1.09 g/t Pt-Pd-Au in hole QDG-22-63 (see March 1, 2023 News Release for more information). The new drilling at Fortin Sill is focused on exploring for additional Ni-Cu-PGE sulphides down plunge and along strike of the main outcropping mineralized zone. Up to 5,000 metres of drilling is planned, which will span more than two kilometers of the strike length of the prospective geology. This work will also test the refined geological model discussed in the Company’s December 15, 2022 news release. Downhole electromagnetic geophysical surveys will be used to vector towards large accumulations of conductive Ni-Cu-PGE sulphides. Tillkännagivande • Jul 08
Québec Nickel Corp., Annual General Meeting, Aug 07, 2023 Québec Nickel Corp., Annual General Meeting, Aug 07, 2023. 
