Aankondiging • Feb 27
C3 Metals Inc. Announces Drill Results At Its 100%-Owned Khaleesi Copper Project in Southern Peru C3 Metals Inc. announced drill results at its 100%-owned Khaleesi copper project in southern Peru. The Company has completed 12 diamond drill holes for 6,300 metres ("m"). Step outs are up to 300m. Khaleesi is a greenfield copper project undergoing drill testing for the first time in the project's history. Assay results from the first two holes were previously reported. Assays have now been received from an additional four holes. KHZ5950-001 was collared 150m north of KHZ5800-001. showing a large irregular shaped magnetic anomaly that is coincident with a zone of outcropping skarn. Downhole assay results are shown along trace of drillhole for copper and molybdenum. Yellow drill traces indicate completed or in-progress drill holes with assays pending, and green drill traces indicated the locations of planned drill holes. Results from the first six holes assayed and visual observations for the remaining six holes demonstrate potential for higher grade mineralization in the western and southwestern project area. Mineralization in the east and northeast project area appears to be more distal from the 'heat engine' of the system. With more drilling, the company will be able to define the geometry of the system and vector into the higher-grade zones. The company plan to drill an additional 15,000m in 2026 beyond the first 6,300m completed, for a total 21,300m drilled at Khaleesi by the end of this year. Since it is unclear what metals will be the principal products and as Khaleesi is an early-stage greenfield project with no metallurgical test work completed, assuming different recoveries is premature at this stage. As such an 80% recovery rate is justified. The Company is planning up to 15,000m of drilling comprising 25 to 30 holes in 2026. The drill program will focus on testing: The strike and depth potential of the mineralized garnet and magnetite skarn;. The source of the intense quartz veining observed in KHZ5800-002, which intersected 51.1m at 0.54% copper, 0.31 g/t gold, 3.21 g/t silver, and 6 pp molybdenum (0.86% CuEq), including 18.0m at 1.08% copper, 0.76 g/t gold, 7.62 g/t silver and 7 ppm molybdenum (1.85% CuEq); and. Further skarn and porphyry potential below the glacial till and along the prosperous limestone-diorite contact. Results indicate real potential for a large-scale skarn system with alteration-mineralization vectors suggesting a potential causative porphyry system. The Company is continually updating its geological model and identifying vectors to better target the skarn and potential porphyry system. With the initial Phase 1 drilling program of 6,300m now completed, and the potential for a mineral system confirmed, the Company has initiated an aggressive drill strategy in 2026. For additional information, contact: Dan Symons. The formula is: CuEq % = Cu % + (0.907 x Au g/t) + (0.0107 x Ag g/t) + (0.00051 x Mo ppm). Since it is unclear what metals'll be the principal products and asKhaleesi is an early- stage greenfield project with no met allurgical test work completed, assuming various recoveries is premature at this stages. As such an 80% Recovery rate is justified. As such an 80% recoveries is justified. Aankondiging • Feb 12
C3 Metals Inc. announced that it has received CAD 28.0005 million in funding On February 11, 2026, C3 Metals Inc. close the transaction. The company announced that it has closed its bought deal private placement of 25,455,000 common shares in the capital of the Company (the “Shares”) at a price of CAD 1.10 per Share for gross proceeds of CAD 28,000,500. As consideration for the services provided by the Underwriters in connection with the Offering, the Company paid the Underwriters a fee of CAD 1,680,030, equal to 6% of the proceeds of the Offering. All securities issued in connection with the Offering are subject to a statutory hold period ending June 12, 2026. The Offering is subject to the final acceptance of the TSX Venture Exchange. Aankondiging • Jan 22
C3 Metals Inc. announced that it expects to receive CAD 20.0002 million in funding C3 Metals Inc. announced that it has entered into an agreement with Paradigm Capital Inc., as lead underwriter and on behalf of a syndicate of underwriters, pursuant to which the underwriters have agreed to purchase, on a bought deal private placement basis, 18,182,000 common shares of the company at a price of CAD 1.10 per share for gross proceeds to the company of CAD 20,000,200 on January 21, 2026. The offering is being made by way of private placement in the provinces of Canada. The shares may also be offered in the United States pursuant to exemptions from the registration requirements of the United States Securities Act of 1933, as amended, and in such other jurisdictions as may be mutually agreed upon by the underwriters and the company. The securities issued under the offering will be subject to a hold period expiring four months and one day after the closing date of the offering. The offering is expected to close on or about February 11, 2026, and is subject to certain closing conditions, including, but not limited to, the receipt of all necessary regulatory and other approvals including the approval of the TSX Venture Exchange. A cash commission equal to 6.0 per cent on the gross proceeds of the offering shall be paid to the underwriters, subject to the policies of the TSX Venture Exchange and applicable securities laws. Aankondiging • Jan 21
C3 Metals Inc. Announces Results on the Second Drill Hole At its 100%-Owned Khaleesi Copper Project in Southern Peru C3 Metals Inc. announced results on the second drill hole at its 100%-owned Khaleesi copper project in southern Peru. The hole intersected 51.1m at 0.54% copper, 0.31 g/t gold, 3.21 g/t silver and 6 ppm molybdenum (0.86% CuEq) from 339.6m downhole depth (approximately 250m vertical depth). Within that interval is 18.0m at 1.08% copper, 0.76 g/t gold, 7.62 g/t silver and 7 ppm molybdenum. The second drill hole at Khaleesi, KHZ5800-002, was collared along the marble-diorite contact and targeted the southwest extension of the copper mineralization intersected in KHZ5800-001 that intersected multiple zones of mineralization including 269.0m at 0.30% copper, including 60.4m at 0.41% copper. Collectively, the first two drill holes at Khaleesi suggest telescoping and multiple. copper-mineralizing events in the broader hydrothermal system. Khaleesi Drill Hole Highlights. The vein-hosted, copper-gold mineralization remains open along strike and at depth. The Company is planning multiple scout holes under an area of thin glacial till cover to test the sheeted vein zone and to probe deeper into the source of the intense quartz veining seen in Khaleesi. To date, approximately 4,200m of the maiden planned 6,300m program have been completed. The Company is utilizing oriented core at its Khaleesi drill program. Bornite contours are also being modeled based on visual observations in drill core with the goal of continuing to vector in on the high-temperature core of the hydrothermal system. Aankondiging • Jan 14
C3 Metals Inc. Restarts Full Exploration Activities in Jamaica Following Community Assistance Programs After Hurricane Melissa C3 Metals Inc. announced that project infrastructure has been restored following Hurricane Melissa making landfall over Jamaica on October 28, 2025, and full exploration activities have recommenced. Super Block Project. At the Company's 50%-owned Super Block project the phase one scout drilling program comprising a 14-hole 2,500m program is approximately 50% complete. To date, seven of the 14 holes of the program have been completed. Drilling has recommenced. Bellas Gate Project. At its 100%-owned Bellas Gate project, where Freeport-McMoRan Exploration Corporation is currently funding exploration and project related costs as part of a previously announced earn-in agreement, the Company has resumed exploration drilling with its Company-owned, man-portable drill rig. The Company has also resumed a 70 sq. km 3DIP geophysical survey of which approximately 46 sq. km has been completed to date. Community Assistance Programs. Concurrent with restoring project infrastructure, the Company embarked on a much-needed community assistance program following the devastation brought by Hurricane Melissa. The Company's community assistance program included: The delivery of food, water and basic necessity care packages;. Road repairs and clearing to reconnect communities; and. Providing roofing and housing materials to rebuild damaged homes and community buildings. In total, C3 Metals assisted approximately 500 families across three communities concurrent with restoring project infrastructure necessary to restart exploration activities. Aankondiging • Dec 29
C3 Metals Inc., Annual General Meeting, Feb 27, 2026 C3 Metals Inc., Annual General Meeting, Feb 27, 2026. Aankondiging • Jun 05
C3 Metals Inc. Commences Drill Testing Multiple Epithermal Gold Targets at Super Block Project, Jamaica C3 Metals Inc. announced it has commenced an initial 14 diamond drill hole, 2,500m program on its 50%-owned Super Block Project, a joint venture with Geophysx Jamaica Limited. The program is designed to test multiple epithermal gold targets over a 5km strike extent, where a strong gold geochemical anomaly coincides with radiometric (pot potassium) highs. Drilling will test multiple prospects including the past producing Pennants Gold Mine and the PEZ and DHZ prospects along trend. Super Block Project Highlights: Past producing Pennants Gold Mine: Operated as an open pit between 2002 and 2004 with estimated production of approximately 16,000 gold ounces. Non-compliant NI 43-101 historical mineral resource of 75,500 tonnes at 20.4 g/t gold1,2. Historical high-grade drill intersections3 from the mine property (drill results are historical in nature and have not been independently confirmed): 1.7m at 430.0 g/t gold; 3.8m at 56.4 g/t gold; 4.6m at 25.6 g/t gold; 9.2m at 18.4 g/t gold); and 3.1m at 17.0 g/t gold. Best soil line results are 60m averaging 0.41 g/t gold and 103m averaging 0.20g/t gold with samples collected at 5m intervals. Rock chip samples assayed up to 1.1 g/t gold at surface. DHZ Prospect: Rock and soil sampling defined a coherent northwest trending gold anomaly measuring 550m by up to 190m wide. Historical drilling within the Super Block focused on the former producing Pennants Gold Mine. Approximately 94 drill holes were completed at Pennants with an average hole depth of only 82 metres. Based on historical drill data and newly collected soil geochemical data, the Company believes the gold system remains open in multiple directions and at depth. Other than a few auger holes (average depth 1metre), no drilling has been reported at PEZ and DHZ prospects. Surface mapping and sampling at the Super Block Project has demonstrated gold mineralization continues for over a +5km strike extent, extending from DHZ through the former Pennants Mine and through PEZ. The Company interprets this large gold anomaly as potentially hosting multiple low to intermediate sulfidation systems. with radiometric anomalies. Map shows the Super Block soil line locations at Pennants Mine and the DHZ and PEZ prospects. The Company is in a financial position to expand the program beyond the initial 14-hole, 2,500m program should results warrant. C3 Metals anticipates assay results from the initial 14-hole program will be announced during third quarter 2025. Aankondiging • Mar 20
C3 Metals Inc. announced that it has received CAD 11.5 million in funding On March 19, 2025 C3 Metals Inc. closed the transaction and issued 23,000,000 common shares at issue price of CAD 0.50 for gross proceeds of CAD 11,500,000, which includes the exercise of the over-allotment option. As consideration for the services provided by the Underwriters in connection with the Offering, the Company paid the Underwriters a fee of CAD 690,000, equal to 6% of the proceeds of the Offering .All securities issued in connection with the Offering are subject to a statutory hold period ending July 20, 2025. The Offering is subject to the final acceptance of the TSX Venture Exchange. Aankondiging • Feb 28
C3 Metals Inc. announced that it expects to receive CAD 10 million in funding C3 Metals Inc. announced that it has entered into an agreement with Paradigm Capital Inc., as co-lead underwriter with Canaccord Genuity Group Inc. and on behalf of a syndicate of underwriters pursuant to which the Underwriters have agreed to purchase, on a bought deal private placement basis, 20,000,000 common shares at a price of CAD 0.50 per Share for gross proceeds to the Company of CAD 10,000,000 on February 27. 2025. The securities issued under the Offering will be subject to a hold period expiring four months and one day after the closing date of the Offering. The Offering is expected to close on or about March 19, 2025 and is subject to certain closing conditions including, but not limited to, the receipt of all necessary regulatory and other approvals including the approval of the TSX Venture Exchange. Aankondiging • Jan 08
C3 Metals Inc. Further Expands Khaleesi Copper-Gold Mineralization in Peru C3 Metals Inc. announced results from a recently completed surface mapping and rock sampling program at its highly promising Khaleesi copper-gold project in Southern Peru. Ongoing surface mapping and sampling continues to expand the previously identified skarn, porphyry and epithermal vein copper-gold mineralization. The most recent batch of rock chip samples from the Company's mapping and rock sampling program returned up to 1.80% copper, 4.4 g/t gold and 403 ppm molybdenum. Khaleesi represents a rare opportunity to explore an undrilled copper-gold mineralized skarn, epithermal and porphyry prospect on the world-class Andahuaylas-Yauri Porphyry-Skarn belt. The Company has strategically amalgamated a significant mineral concession package of over 30,000 hectares within 45km of the large Las Bambas (MMG) and Constancia (Hudbay Minerals) copper mines. Highlights of Recent Mapping and Sampling Program at Khaleesi. Diorite dykes containing chalcopyrite and chrysocolla, malachite, azurite mineralization. Rock chips assayed up to 0.50% copper, 0.34 g/t gold and 403pp molybdenum. Prograde and retrograde skarn mapped over a 1,200m by 1,000m area. Geochemical and geophysical data collection will be important to understand the potential for a mineralized porphyry system beneath the glacial till, as there is outcropping porphyry-style mineralization and alteration on either side of the till occurrence. Next steps. Following on from the mapping and sampling program, the Company commenced a 50-metre grid soil sampling program over the Khaleesi project area. The Company has contracted Arce Geofisicos to undertake a 45.5-line ground magnetic survey, a 24.5-line kilometre Induced Polarization survey and complete a MT/AMT survey (14 full tensor stations) during the first quarter of 2025. Data from grid-soils and geophysics programs will provide essential surface and subsurface data that will be used to design a maiden drill program. Aankondiging • Dec 31
C3 Metals Inc., Annual General Meeting, Feb 28, 2025 C3 Metals Inc., Annual General Meeting, Feb 28, 2025. Aankondiging • Oct 22
C3 Metals Inc. Announces Results from Partially Completed Surface Mapping and Sampling on Its Khaleesi Copper-Gold Project in the Prolific Andahuaylas-Yauri Porphyry-Skarn Belt of Southern Peru C3 Metals Inc. announced results from partially completed surface mapping and sampling on its Khaleesi copper-gold project in the prolific Andahuaylas-Yauri Porphyry-Skarn belt of Southern Peru. The Khaleesi project is an outcropping, mineralized, undrilled copper-gold skarn and porphyry prospect. The Company's recent "boots on the ground" surface mapping and sampling program has successfully delineated compelling skarn, porphyry and epithermal vein targets. Rock chip samples returned up to 2.82% copper, 6.0 g/t gold, 57.7 g/t silver and 284 ppm molybdenum. The Las Bambas and Constancia copper mines are located less than 45km away from Khaleesi and within the same district, comprising large-scale porphyry-skarn complexes with similar geology and surface expression to that seen at Khaleesi. Khaleesi sits on a northwest trending porphyry and skarn belt that is located approximately 8km to the west of the Company's Jasperoide project where the Company has identified 13 skarn prospects. The first of these 13 skarns to be systematically drill tested was Montana de Cobre, which yielded a maiden Measured and Indicated Mineral Resource of 51.9 million tonnes at 0.50% total copper and 0.20 g/t gold for 569.1 million pounds of copper and 326,800 ounces of gold. Khaleesi and Jasperoide are located along the prolific Andahuaylas-Yauri Porphyry-Skarn belt of Southern Peru. Jasperoide is located along a magnetite skarn belt that contains multiple skarn bodies, including Montana de Cobre Zone (MCZ) skarn deposit. MCZ is the first of 13 identified magnetite skarns that the Company systematically drill tested, yielding a maiden Measured and Indicated Mineral Resource of 51.9 million tonnes at 0.50% total copper and 0.20 g/t gold for 569.1 million pounds of copper and 326,800 ounces of gold. Mineralization at Khaleesi is in a similar geological setting to the nearby major mining operations at Las Bambas (MMG), Constancia and Pampacancha (Hudbay) and Antapaccay (Glencore). The Ferrobamba Formation is an important host for copper-gold mineralization due to its highly reactive nature to hydrothermal fluids. Recent mapping and sampling at Khaleesi have identified outcropping skarn, epithermal and porphyry style alteration with associated copper-gold mineralization (Figure 3). The Khaleesi skarn is zoned, with a prograde garnet-diopside skarn transitioning to magnetite-rich retrograde skarn. Rock samples collected from mineralized outcrops has yielded up to 2.82% copper, 6.0g/t gold, 57.7 g/t silver and 284ppm molybdenum. Immediately west of the skarn is marbleized limestone of the Ferrobamba Formation, locally cut by sheeted and stockwork quartz veins. Rock chip samples of marble cut by quartz veins assayed low in copper geochemistry but yielded up to 2.55g/t gold, 264ppm arsenic and 19.3ppm molybdenum. The copper-gold-molybdenum geochemical signature in rock chips supports the interpretation of a porphyry system at Khaleesi. Next Steps: The undrilled Khaleesi copper-gold porphyry project hosts outcropping skarn and epithermal mineralization. It is a high priority target due to the size of the footprint and its proximity to major producing mines. With a surface access agreement in place with the Cancahuani Community, the Company plans to complete surface mapping and sampling over the 1,800Ha Khaleesi project area. Currently, mapping and sampling is approximately 50% complete. The Company is also planning to undertake soil sampling, Induced Polarization and ground magnetic geophysical surveys over the main project area. These programs should provide essential data prior to drilling and will run concurrently with drill permitting, which is advancing and considered prescriptive now that a surface access agreement is in place. Aankondiging • Oct 10
C3 Metals Inc. announced that it has received CAD 4.5 million in funding On October 9, 2024, C3 Metals Inc. has closed the transaction. The company has issued 14,999,999 common shares at a price of
CAD 0.30 per Common Share for gross proceeds of CAD 4,500,000. All securities issued in connection with the Placement are subject to a hold period until February 10, 2025 and the resale rules of applicable securities legislation. Aankondiging • Sep 24
C3 Metals Inc. announced that it expects to receive CAD 4.5 million in funding C3 Metals Inc. announced a non-brokered private placement to issue 15,000,000 common share at issue price of CAD 0.30 per share for gross proceeds of CAD 4,500,000 on September 23, 2024. The anticipated closing date of the Placement is October 9, 2024. Closing of the Placement is subject to receipt of all necessary corporate and regulatory approvals, including the approval of the TSX Venture Exchange. All securities issued in connection with the Placement will be subject to a hold period of four months plus a day from the date of issuance and the resale rules of applicable securities legislation. The Company may pay up to a 6.0% cash commission on the value of Common Shares issued to subscribers to qualified finders in Canada in connection with the Placement. Any finder fees paid would be in accordance with TSXV policies. Aankondiging • Jun 06
C3 Metals Inc. Drills 294 Metres at 0.30% Copper and 0.13 g/t Gold (0.39% CuEq1) from Surface at Bellas Gate, Jamaica C3 Metals Inc. announced it has intersected 294.0m at 0.30% copper and 0.13 g/t gold from surface in drill hole CMH8390-001 at its Camel Hill porphyry prospect in its 100%-owned Bellas Gate project. The drill hole terminated in 0.36% copper mineralization at 600.0m. This result is a follow up to drill hole CMH8350-001 that reported 207.8m at 0.43% copper and 0.20 g/t gold (0.57% CuEq1) from 22.0m downhole, including 135.0m at 0.52% copper and 0.27g/t gold (0.71% CuEq1). Drilling in Jamaica is evaluating porphyry and epithermal style mineralization associated with multi- phase intrusive complexes. The objective is to establish a significant volume of near-surface copper- gold mineralization that would encompass a bornite-rich core as is commonly associated with economic porphyries. A large area between Geo Hill and Camel Hill with copper in soil greater than 225ppm and coincident magnetic and IP chargeability geophysical anomalies has yet to be drill tested. C3 Metals has intersected significant near surface copper-gold mineralization in multiple holes completed at the Bellas Gate project. Porphyry mineralization is interpreted as high level and is telescoped by later stage epithermal copper-gold mineralization. Locally bornite has been observed at deeper levels in Camel Hill. The Company is now updating 3D geologic models and planning further drill holes to evaluate both the near surface and deeper levels of the Camel Hill porphyry system. In addition, the Company has completed trenching and channel sampling at its 100%-owned Arthurs Seat project and its 50%-owned Super Block project. C3 Metals looks forward to providing additional assay results as they become available. Aankondiging • May 16
C3 Metals Inc. Drills 79 Metres at 0.71% Copper and 0.49 g/t Gold (1.06% CuEq1) at Bellas Gate, Jamaica C3 Metals Inc. announced it has intersected 79.0m at 0.71% copper and 0.49 g/t gold (1.06% CuEq1) from 128m, including 46.0m at 0.95% copper and 0.69 g/t gold (1.,45% CuEq1) at its Connors porphyry prospect in its 100%-owned Bellas Gate project. This most recent result from Connors, along with recent intercepts from Provost and Camel Hill, confirms the potential for high-grade copper-gold mineralization within the porphyry systems at Bellas Gate. Many targets remain to be tested. Systematic exploration aimed at defining economic tonnages of mineralization is continuing. Barrick recently signed an agreement with Geophysx Jamaica Ltd. ("Geophysx") to earn up to 80% in certain mineral concessions that essentially surround C3 Metals' 100% owned 17,855 hectares and its 50% owned 9,870-hectare Super Block. The Super Block project is a recently announced 50-50 joint venture between C3 Metals and Geophysx that includes the past producing Pennants Gold mine. Regionally, C3 Metals has identified 16 porphyry, 40 epithermal and multiple volcanic hosted redbed style copper-gold prospects over a 30km strike extent. It was designed to test below drill hole CON9325-001, which intersected 309.0m at 0.44% copper and 0.33 g/t gold (0.67% CuEq1). Drill hole CON9325-002 intersected 79.0m At 0.71% copper and0.49 g/t gold ("1.06%CuEq1") from 128.0m, including 46.0 m at 0.95% copper & 0.69 g/t Gold (1.45% CuEq1). Due to the copper-gold grade profile at Connors, the newly identified Connors SE prospect becomes a high-ranking, near-surface porphyry target. C3 Metals is conducting field work in the area to determine the best location for a drill pad for the initial test of this new prospect. Next Steps. C3 Metals has completed multiple drill holes at the Camel Hill and Geo Hill porphyry prospects on the Bellas Gate project. Assays are pending. Separately, the Company has begun trenching and channel sampling at its 100%-owned Arthurs Seat project and its 50%-owned Super Block project. C3 Metals looks forward to providing additional assay results as they become available. The Company's drill contractor recently completed the required metreage under its drilling contract. C3 Metals will continue to drill with its more cost-efficient, company-owned, diamond drill rig. For additional information, contact: Dan Symons. ALS is an accredited laboratory which is independent of the Company. Gold assays were by fire assay fusion with AAS finish on a 30g sample and the overlimit gold assay was completed by fire assay and gravimetric finish on 30g sample. Copper and silver were assayed by ICP-AES following a 4-acid digestion on the ME-ICP61 package for a suite of 33 elements and the over limit copper by 4-Acid digestion and assayed by ICP- AES on each sample with copper greater than 1000ppm (1%). Forward looking information involves known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements to be materially different from any future results, performance or achievements expressed or implied by the forward-looking information. Such factors include risks inherent in the exploration and development of mineral deposits, including risks inherent in the exploration and Development of mineral deposits, including risks relating to changes in project parameters as plans continue to be redefined, risks relating to variations in grade or recovery rates, risks relating to changes in mineral prices and the worldwide demand for and supply of minerals. Aankondiging • Mar 30
C3 Metals Inc. Provides Update on Its Copper-Gold Exploration Program in Jamaica C3 Metals Inc. provided an update on its copper-gold exploration program in Jamaica and communicate its exploration objectives. The Company is currently systematically evaluating a district-scale property where 16 porphyry, 40 epithermal, and multiple volcanic redbed copper prospects have been identified over 30km of strike extent. Exploration Objectives: C3 Metals is focused on the discovery of at least one million tonnes of contained copper equivalent on its district-scale mineral concession package in Jamaica. Across the Bellas Gate and Arthurs Seat properties surface exploration has delineated approximately 18km of continuous copper in soil geochemistry assaying over 300ppm copper together with over 800 rock chip samples assaying above 0.50% copper. Numerous mineralization styles (porphyry, epithermal, volcanic redbed) are evident across numerous prospects. C3 Metals is systematically testing these prospects as quickly and efficiently as possible to determine the probability of an individual prospect meeting the one million tonnes of contained copper equivalent criteria. Examples of target size/grade criteria include: 200Mt at 0.5% CuEq (open pit target); 100Mt at 1.0% CuEq (open pit or underground target); 50Mt at 2.0% CuEq (open pit or underground target). The Company has confirmed multiple mineralization styles (porphyry, epithermal and volcanic redbed) with exploration targets that potentially meet the tonnage and grade criteria. Systematic exploration will confirm whether each individual prospect meets or fails to meet the defined criteria. Exploration Update: The Company has been drilling with two rigs at its 100% owned Bellas Gate project, primarily at the Provost porphyry prospect. Provost was selected for systematic drilling due to its 1,200m long by up to 1,000m wide copper in soil anomaly coincident with magnetic and IP chargeability geophysical anomalies and three historical drill holes that confirmed porphyry-style copper-gold mineralization below surface. potential at depth to understand the probabilities of Provost meeting C3 Metals' target size/grade criteria. Near-surface, step out drill holes to the northwest have shown the Provost mineralization to be irregular in shape, as porphyry mineralization plunges downdip in the central prospect area. Mineralization remains open along strike to the east, north and at depth. Deeper drill holes were planned to test the grade potential at depth as a follow up to drill hole PVT0825- 001, which intercepted 281m at 0.37% copper and 0.21 g/t gold (0.52% CuEq), including 62m at 0.50% copper and 0.39 g/t gold (0.77% CuEq). Copper and gold grades clearly increased with depth in PVT0825-001, with the ratio of chalcopyrite to pyrite increasing downhole and bornite mineralization observed at approximately 450m vertical depth. To date, a single deeper drill hole (PVT0825-003) has been completed at Provost. PVT0825-003 intersected a cumulative 449m intercept of porphyry copper-gold mineralization associated with sheeted porphyry B-veins and locally quartz stockworks. At approximately 550m downhole, PVT0825-003 encountered a fault zone of heavily silicified and mineralized broken rock making for inefficient drill productivity until the hole was terminated in mineralization at 780m downhole depth. Trace bornite mineralization was observed in hole PVT0825-003, and it is possible that a higher grade bornite rich core to the Provost porphyry prospect is present immediately below or east of this fault zone associated with a large magnetic geophysical anomaly. Next Steps: The Company continues to drill with two rigs at the Bellas Gate project. Two holes at the Geo Hill prospect have been completed and assays are pending. While the Company awaits the assay results from these holes, drilling has commenced testing the northwest extension of the Camel Hill porphyry prospect where drill hole CMH8400-002 reported 108.0m at 0.42% copper and 0.26 g/t gold (0.60% CuEq) from only 6.0m downhole. Drilling has also commenced at the Connors porphyry prospect (Figure 2) to test below drill hole CON9325-001, which intersected 309.0m at 0.44% copper and 0.33 g/t gold (0.67% CuEq). Aankondiging • Jan 10
C3 Metals Inc. Provides Successful 2023 Exploration Program and Plans Up to 20,000m of Drilling in Jamaica C3 Metals Inc. provided an update on 2023 exploration results and strategy for 2024 at the Company's 100% owned copper-gold projects in Jamaica. Exploration work has confirmed 16 porphyry and over 40 epithermal copper-gold prospects along a 30km strike extent. Drill holes completed during 2023 highlight significant porphyry potential that remains open at depth and along strike. The 2023 exploration program focused on a comprehensive remapping campaign over the Bellas Gate and Arthurs Seat mineral concessions in order to advance understanding of the geology, refine the Company's geologic interpretation and develop a first pass 3D regional geology model for use in planning future drill targets. All geologic data has been incorporated into a regional geology model, which is significantly enhancing targeting copper-gold-silver mineralization. The 2023 drilling campaign confirmed a cluster of high level, uneroded porphyry systems and associated fully preserved epithermal base and precious metal veins (low, intermediate, and high sulphidation). Drillhole assays confirm significant potential for a meaningful copper-gold porphyry discovery in this highly prospective, yet significantly underexplored porphyry-epithermal belt. The 2024 Jamaica drill program will largely focus on the Bellas Gate Project where two district scale porphyry copper-gold and epithermal copper-gold-silver vein corridors extend over 10km of strike extent. C3 Metals plans to systematically evaluate these two mineralized corridors and anticipates drilling up to 20,000m on high priority targets in 2024. A cluster of copper-gold mineralized porphyries has been identified associated with a 4km zone of strong porphyry alteration mapped at surface. Drilling will progressively step out along strike to determine the potential for continuous copper-gold mineralization in this highly prospective zone. Work is also planned to further develop other priority copper-gold prospects, which include; COFFEE - Magnetic anomaly and coincident 2.5km by 2.5km copper-in-soil anomaly; PLEASANT HILL - Magnetic & IP anomalies and coincident 700m by 600m copper-in-soil anomaly; COCOA RIDGE - Magnetic anomaly and coincident 900m by 500m copper-in-soil anomaly; STAMFORD HILL - CHARING CROSS EPITHERMAL FIELD - Spanish and British historical adits and shafts exploited multiple high-grade copper-gold-silver epithermal veins up to 10m wide; ARTHURS SEAT- an untested porphyry target. Discrete magnetic anomaly over a high tenor 1200m by 800m copper in soil anomaly. Additionally, Induced Polarisation (IP) geophysics survey work is planned at Bellas Gate and Arthurs Seat in 2024. Completing an IP survey will be a major step to aid in the systematic evaluation of numerous porphyry and epithermal prospects. After a short break for the drill crews during the holiday season, drilling has resumed with two drill rigs. Both rigs are currently drilling at Provost to test the strike and depth extent of this high-priority porphyry target. With a well-funded treasury following the closing of an oversubscribed and upsized private placement on November 15, 2023, two drill rigs turning and up to 20,000m of drilling planned for 2024, C3 Metals expects to provide regular news flow from its exploration program in Jamaica. Aankondiging • Dec 30
C3 Metals Inc., Annual General Meeting, Mar 01, 2024 C3 Metals Inc., Annual General Meeting, Mar 01, 2024. Aankondiging • Nov 29
C3 Metals Inc. Reports Assays from Two Additional Holes Drilling At the Provost Porphyry Target on Its Bellas Gate Project in Jamaica C3 Metals Inc. reported assays from two additional holes drilled at the Provost porphyry target on the Company's 100% owned Bellas Gate project in Jamaica. Drill hole PVT0825-001 (596.7m) intersected 280.7m at 0.37% copper and 0.21 g/t gold (0.52% CuEq1) from 227.0m, including 61.7m at 0.50% copper and 0.39 g/t gold (0.77% CuEq1) from 446.0m. To date, approximately 5,200m of an 8,500m drill program have been completed. Assays are pending for multiple holes, and drilling remains ongoing with two rigs. Bornite and hypogene chalcocite mineralization, as well as potassic alteration, were confirmed at approximately 500m depth. The Company believes it is possible that PVT0825-001 "clipped" the top of the bornite core of the porphyry system (Figures 2 and 3). PVT0825-001 was drilled with C3 Metals' man-portable drill rig to a record depth of 596.7m for this rig. The presence of bornite mineralization and potassic alteration corresponded with a spike in grades to 1.14% copper and 1.19 g/t gold (1.98% CuEq1) over a 2.5m interval. Therefore, the Company has planned a follow up drill hole utilizing its larger capacity contract drill rig, which has depth capacity of more than 1,000m. The Company is currently defining the dimension and grade of copper-gold mineralization in an intial 900m by 200m target area that remains open in multiple directions and at depth. Provost Drilling Highlights: Drill hole PVT0825-001 intersected 280.7m at 0.37% copper and 0.21 g/t gold (0.51% CuEq1) from 227.0m, including 61.7m at 0.50% copper and 0.39 g/t gold (0.77% CuEq1) from 446.0m. Full transition from pyrite to chalcopyrite-pyrite to bornite mineralization intersected for the first time at the Bellas Gate project. A 2.5m interval of potassic alteration with associated bornite mineralization assayed 1.14% copper and 1.19 g/t gold (1.98% CuEq1) from 503.0m, which is interpreted as the top of a bornite-rich potassic altered core of the Provost porphyry system. Deeper drilling is planned to test below hole PVT0825-001 for extensions of these highgrades. Copper-gold mineralization successfully extended 150m vertically below earlier drill hole PVT0900-002, which intersected 390.7m at 0.37% copper and 0.19 g/t gold (0.50% CuEq1) from 64.1m (see press release dated September 25, 2023). Drill hole PVT0900-004 intersected 170.1m at 0.31% copper and 0.16 g/t gold (0.42% CuEq1) from 68.1m. The hole terminated in 0.30% copper mineralization within a fault zone at 300m depth. Drill Summary: C3 Metals has identified 16 porphyry and 40 epithermal targets across a 30km strike extent within its contiguous mineral concession package in Jamaica. Most historical drilling, while limited, was conducted in the Bellas Gate project area. This historical drilling was relatively shallow, averaging 225m depth with approximately 40% of holes ending in mineralization. The Company's current drilling objectives are twofold: 1) test the strike extent of near-suface mineralization, and 2) test the high grade potential at depth by locating the bornite-rich potassic altered cores typically found in economic porphyry systems. Drilling at Provost continues to define a well-developed porphyry and epithermal copper-gold system that displays classic porphyry style alteration and mineralization zonation. The Company has successfully intersected porphyry and epithermal style mineralization along 400m of strike length and approximately 550m down dip. Provost remains open in multiple directions and at depth. PVT0825-001 extends the northwest striking mineralized zone an additional 150m down dip and, more importantly, confirms the presence of high-grade, bornite-hosted copper mineralization. The upper levels of PVT0825-001 intersected andesite volcanics with kaolinite alteration overprinting illite-chlorite alteration, interpreted as advanced argillic alteration. Below this upper leached zone, is high-grade porphyry copper-gold mineralization and epithermal style base and precious metal mineralization with locally well-developed porphyry quartz stockwork and sheeted B-veins. Aankondiging • Nov 17
C3 Metals Inc. announced that it has received CAD 8.05 million in funding On November 15, 2023, C3 Metals Inc. closed the transaction. The company issued 115,000,000 common share at a issue price of CAD 0.07 per share for the gross proceeds of CAD 8.050,000. In connection with the Offering the Company paid certain eligible finders cash commissions in the aggregate of CAD 42,600 and an advisory fee of CAD 107,100. All securities issued in connection with the Offering are subject to a hold period expiring on March 16, 2024 and the resale rules of applicable securities legislation. The Offering is subject to the final approval of the TSX Venture Exchange. Aankondiging • Nov 02
C3 Metals Inc. announced that it expects to receive CAD 7 million in funding C3 Metals Inc. announced a private placement of 100,000,000 common shares at a price of CAD 0.07 per share for the gross proceeds of CAD 7,000,000 on November 1, 2023. The transaction is expected to close on November 15, 2023. Closing of the placement is subject to receipt of all necessary corporate and regulatory approvals, including the approval of the TSX Venture Exchange. All securities issued in connection with the placement will be subject to a hold period of four months plus a day from the date of issuance. Aankondiging • Oct 12
C3 Metals Inc. Extends Copper-Gold Porphyry Mineralization 150M At Provost At Bellas Gate, Jamaica; Drill Hole Ended in 1.1M At 1.27% Copper and 4,090 G/T Silver C3 Metals Inc. announced it has received assays for PVT0900-003, the third hole of the 2023 drilling program completed on the Provost porphyry target. The Company is evaluating an extensive zone of near surface porphyry and epithermal base and precious metal mineralization at Provost. Provost is located along a 4km northwest trend at the Company's 100% owned Bellas Gate project in Jamaica. Provost drill hole PVT0900-003 (418.6m), which was terminated 150m short of target depth due to drilling difficulties in a fault zone, intersected 112m at 0.35% copper and 0.13 g/t gold (0.44% CuEq1) from 305.8m with the last 1.1m of the hole ending in high-grade epithermal style mineralization grading 1.27% copper and 4,090 g/t silver. This hole extended known copper-gold mineralization at Provost by 150m to the northwest. PVT0900-003 intersected 112m at 0.35% copper and 0.13 g/t gold (0.44% CuEq1) from 305.8m and terminated in an epithermal vein in the last 1.1m of the hole grading 1.27% copper and 4,090 g/t silver. Porphyry copper-gold mineralized zone extended by 150m along strike from PVT0900-002, which intersected 390.7m at 0.37% copper and 0.19 g/t gold (0.50% CuEq1) from 64.1m, including 279.5m at 0.43% copper and 0.24 g/t gold (0.60% CuEq1). Assays pending for completed drill holes PVT0900-004 (300.2m) and CMH8275-001 (500.4m). Drilling is well advanced on two additional holes. The Company's man-portable rig is currently evaluating near-surface tonnage potential of porphyry and epithermal style base and precious metal mineralization at Provost. The larger contract rig is testing for depth extension to the copper-gold mineralization at Camel Hill. Drilling to date confirms porphyry copper-gold mineralization is overprinted by intermediate and high sulphidation epithermal veins that extend to at least 400m depth. The sub-surface mineralized zone has been expanded a further 150m northwest of PVT0900-002. High-level porphyry copper-gold mineralization is overprinted by epithermal quartz veins with strong chalcopyrite and tetrahedrite mineralization. High-grade epithermal style mineralization was anticipated at Provost, as much of the epithermal and porphyry hydrothermal systems remain intact. It is very positive to confirm this high-grade epithermal potential within the porphyry system at such an early stage in the program. The upper section of PVT0900-003 intersected high-level, low-grade porphyry copper-gold mineralization that is predominantly hosted in intrusive rock types, assaying 103m at 0.18% copper, 0.10g/t gold and 0.89g/t silver from 48.1m downhole. Higher grade diorite-hosted copper-gold porphyry mineralization was intersected downhole, starting from 305.8m. The final 1.1m intersected extremely high-grade silver at 4,090 g/t and high-grade copper at 1.27%. The hole had to be abandoned due to poor ground conditions, and this zone will be further tested from a collar located 400m north of PVT0900 drill pad location. Despite abandoning the hole due to ground conditions, 70-80% core recoveries were achieved, and high-grade epithermal copper and silver mineralization was confirmed. Aankondiging • Sep 26
C3 Metals Inc. Receives Assays for the Final 130.7M of Drill Hole PVT0900-002 C3 Metals Inc. announced it has received assays for the final 130.7m of drill hole PVT0900-002. Assays for the first 350.0m were reported on September 12, 2023. Drill hole PVT0900-002 intersected 390.7m at 0.37% copper and 0.19 g/t gold (0.50% CuEq1) from 64.1m, including 279.5m at 0.43% copper and 0.24 g/t gold (0.60% CuEq1). This is the broadest interval of copper-gold mineralization reported to date at the Company's 100% owned Bellas Gate project in Jamaica. Ongoing drilling will continue evaluating a cluster of discrete high priority porphyry copper-gold targets. C3 Metals is drill testing both the strike and depth potential of these porphyry targets with two goals: adding potential near-surface mineralized material tonnage and locating the bornite-rich potassic altered higher-grade core found in most economic porphyry systems. These targets are defined by coincident alteration, geochemistry and geophysics anomalies along the two parallel Camel and Connors porphyry belts at the Bellas Gate project. Approximately 2,500m of a fully funded 8,500m drill program has been completed to date. Drilling Highlights: Longest interval of copper-gold mineralization ever intersected at the Bellas Gate project. 390.7m at 0.37% copper and 0.19 g/t gold (0.50% CuEq1) from 64.1m, including 279.5m at 0.43% copper and 0.24 g/t gold (0.60% CuEq1) intersected in drill hole PVT0900-002. PVT0900-002 terminated in highly altered diorite and andesite cut by pyrite - magnetite ± chalcopyrite ± molybdenite in veins, with an intense anhydrite overprint. Drill holes PVT0900-003 (418.6m) and CMH8350-001 (662.0m) completed - assays pending. Two additional drill holes are well advanced. Multi-phase system - Porphyry style alteration and mineralization is overprinted or telescoped by intermediate and high-sulphidation epithermal copper-gold mineralization. Drilling at the Provost porphyry target confirms a telescoped, almost fully intact, and non-eroded porphyry copper-gold system. This system is interpreted to be spatially associated with a larger porphyry system at depth, as illustrated in cross section. Mineralization comprises chalcopyrite and pyrite in strongly phyllic to potassic altered diorite and andesite volcaniclastics. Pervasive anhydrite alteration is observed at approximately 400m depth, as veins and infill, locally associated with chalcopyrite mineralization. The presence of strong anhydrite alteration and the multi-phase overprinting of epithermal veins telescoped onto an existing porphyry are positive indicators. Drill results continue to support the interpretation of a well-developed and fertile hydrothermal system. C3 Metals will continue to explore for bornite-rich copper mineralization that is commonly central to most porphyry systems. Next Steps: Recent and historical drilling at Provost confirms porphyry and epithermal copper-gold mineralization is open in most directions. C3 Metals owns a man-portable drill rig that is currently stepping out along strike and at depth at Provost. Based on surface geologic mapping, historical and recent drilling results, the Provost porphyry target currently measures 1,500m in length, averages 350m in width, and has a confirmed depth extent of at least 400m. Planned drilling at Provost is designed to systematically test along strike of this coincident geology, geophysics and geochemical anomaly. The larger capacity contract drill rig is currently drilling approximately 3.5km southeast of Provost at the Camel Hill porphyry target. The Camel Hill porphyry target currently measures 1,800m in length and 1,000m in width and is defined by a coincident geology, geophysics and geochemical anomaly. The first hole was planned to a depth of 450m but was extended to 662m due to the presence of strong pyrite, lesser chalcopyrite and favorable porphyry-style alteration below the original target depth (assays pending). A second hole is currently in progress with a target depth of approximately 500m. These holes provide structural, geochemical, alteration and mineralization data to aid in targeting the bornite-rich potassic altered core found in most economic porphyry systems. Four deep holes (700m - 1,000m) are currently planned along the Camel and Connors porphyry belts. The Company looks forward to providing further updates as drilling progresses and anticipates a steady flow of assay results. Aankondiging • Jan 26
C3 Metals Confirms Multiple Gold Targets At Main Ridge Project, Jamaica C3 Metals Inc. announced rock chip assay results up to 35.8 g/t gold from a comprehensive mapping and sampling program on the Company's 100% owned Main Ridge project in Jamaica. The 3,000-hectare Main Ridge project is contiguous with and approximately 15 kilometres to the west of C3 Metals' previously announced discovery of an outcropping, large-scale epithermal vein swarm within its 100% owned 6,000-hectare Arthurs Seat project, where drilling is underway. High-grade Main Ridge rock chip samples are similar in style to and less than one kilometre from the past producing Pennants Gold Mine. The Pennants Gold Mine was operated from 2002 to 2004 on a reported non-compliant NI 43-101 historical mineral resource of 75,500 tons at 20.4 g/t gold. The operator reported historical high- grade drill intersections of 1.7m at 430.0 g/t gold and 4.6m at 25.6 g/t gold from the mine property (drill results are historical in nature and have not been independently confirmed). C3 Metals recently expanded its surface mapping and sampling program to cover the entire 6,000- hectare Arthurs Seat concession, the northern area of the Bellas Gate concession and the 3,000-hectare Main Ridge concession. Results from the ongoing program and previous field exploration programs at Main Ridge have identified multiple gold and copper targets with similar mineralization styles to those identified at Arthurs Seat. A total of 941 rock chip and channel samples have been collected to date with 59 rock samples reporting over 0.10% copper (up to 18.5% copper) and 83 samples reporting over 0.10 g/t gold (up to 35.8 g/t gold). The Company received drill permits for Arthurs Seat two months after application and commenced a planned 25-hole, 5,000m diamond drill program during December 2022. Arthurs Seat is a grassroots discovery of an 8.0km by 4.5km copper-gold-silver mineralized footprint that has never been drill tested. Within the southeast portion of this mineralized footprint sits an outcropping epithermal vein swarm mapped and sampled over a 5.0km by 3.0km area. The Company has collected thousands of samples at Arthurs Seat and previously announced rock chip assays up to 58.1 g/t gold, 16.5% copper and 4,890 g/t silver. To date, four of the planned 25 drill holes have been completed. Assays are pending for the first two holes with the third and fourth holes being prepared for shipment to the assay lab. The Company is continuing an aggressive mapping and sampling program along the 20km trend of the CRFZ, from the northern portion of Bellas Gate, through Arthurs Seat to Main Ridge. Surface mapping and sampling will continue over the coming months to define drilling priorities. Aankondiging • Dec 31
C3 Metals Inc., Annual General Meeting, Mar 03, 2023 C3 Metals Inc., Annual General Meeting, Mar 03, 2023. 
