공시 • Jun 04
InCoax Networks AB Expands D-Series Family With Introduction Of D2502 ER And D2504 ER InCoax Networks AB announced the expansion of its D-series product family with the introduction of the D2502 ER and D2504 ER, creating a complete and scalable DPU portfolio for broadband deployment in small, medium and large multi-dwelling units. The expanded portfolio enables operators to standardize on a common InCoax platform across a wider range of building types, supporting faster, more cost-efficient rollouts using existing in-building coaxial infrastructure. The new products are based on the recently introduced D2508 ER and enable operators to use one common platform across a wider range of property sizes and deployment scenarios. By matching network capacity to building size while maintaining the same software architecture, management interfaces and operational model, operators can simplify planning, installation and network operations. The D-series family is based on MoCA Access 2.5 technology and is designed to help operators accelerate broadband deployment in apartment buildings by reusing existing in-building coax infrastructure. This reduces the need for new wiring, minimizes disruption for residents and lowers in-building deployment costs. All models share the same software architecture, management interfaces and service capabilities, including support for eQoS for MoCA Access 2.5, remote management, and integration with InCoax Manage EMS or third-party systems. The platform also supports coexistence with legacy TV services and DOCSIS networks, enabling service upgrades while preserving existing infrastructure. The D-series family supports GPON, XG-PON, XGS-PON and Active Ethernet uplinks, enabling deployment in a wide range of fiber access architectures. As part of the InCoax MoCA Access platform, the products support both Fiber Access Extension and FWA Extension over existing coaxial infrastructure. All models include Extended Range (ER), providing enhanced output power and link budget for demanding in-building environments. The D-series family is available in regional variants for EU, US and UK markets. 공시 • May 22
InCoax Networks AB (publ) Launches Incoax Fiber Extension Solution InCoax Networks AB (publ) announced the launch of InCoax Fiber Extension, a new solution category developed to help fiber operators reduce installation complexity and accelerate customer activation in single-family homes and selected smaller apartment buildings. The launch addresses a growing need in the U.S. fiber market, where operators are increasingly focused on converting fiber passings into active customers in a faster, less intrusive and more cost-effective way. According to the Fiber Broadband Association, U.S. fiber deployment reached a new record level in 2025, with 11.8 million new homes passed during the year and a total of 98.3 million FTTH passings when overlapping deployments are included. This means that the market is approaching 100 million FTTH passings and that fiber now passes more than 60% of U.S. households. The broader U.S. housing market further highlights the scale of the opportunity. According to the U.S. Census Bureau, the number of housing units in the United States reached approximately 148 million in 2025, and NAHB estimates that owner-occupied single-family detached homes account for approximately 70 million homes. This creates a substantial market for solutions that make the final in-home step of fiber activation more efficient. For fiber operators, the installation challenge increasingly moves inside the home or property. The most practical fiber entry point may be an outdoor cabinet, garage, basement or utility location, while the optimal position for the Residential Gateway is often elsewhere. By reusing existing point-to-point coaxial cabling, InCoax Fiber Extension enables operators to extend the fiber connection from the ONT location to a more suitable Residential Gateway location without new in-home fiber or Ethernet cabling. For InCoax, the launch expands the company's addressable market with a new solution category that complements its existing Fiber Access Extension and FWA Extension offerings. The solution is based on InCoax Fiber Extenders using MoCA 2.5 technology and is primarily intended for single-family homes but can also be used in selected smaller MDUs. Two Fiber Extenders are paired over a point-to-point coaxial connection, creating an unmanaged bridge between the fiber termination point and the customer gateway. The InCoax Fiber Extender F2511 supports symmetrical data rates up to 2.5 Gbps, automatic code-based pairing and no management capabilities. Fiber Extension differs from InCoax Fiber Access Extension and FWA Extension, which are managed access solutions for MDUs using an InCoax MoCA Access DPU, NTE modem and InCoax Manage for provisioning, monitoring and remote management. Fiber Extension, by contrast, does not require a DPU, NTE, EMS integration or subscriber profile management. InCoax Fiber Extender series also includes a Reverse Power Feed, RPF, version for scenarios where power at the fiber-side location may be limited or unavailable. The Fiber Extension solution is now available as part of InCoax's portfolio for operators and partners. Brochure and product information on Fiber Extension (Use Cases) are available. 공시 • May 15
InCoax Networks AB (publ), Annual General Meeting, Jun 12, 2026 InCoax Networks AB (publ), Annual General Meeting, Jun 12, 2026, at 09:00 W. Europe Standard Time. Location: company premises at ideon science park, mobilvagen 10, lund Sweden Reported Earnings • May 11
First quarter 2026 earnings released First quarter 2026 results: Revenue: kr6.51m (down 80% from 1Q 2025). Net loss: kr14.6m (loss widened 484% from 1Q 2025). 공시 • May 07
InCoax Networks AB (publ) to Report Q1, 2027 Results on May 07, 2027 InCoax Networks AB (publ) announced that they will report Q1, 2027 results on May 07, 2027 공시 • May 02
InCoax Networks AB Announces D2508 ER For Large Apartment Buildings InCoax Networks AB announced the D2508 ER, a MoCA AccessTM 2.5 DPU for extending fiber-based broadband over existing in-building coaxial networks in mid- to large-sized multi-dwelling units (MDUs). The D2508 ER is the first release in a new DPU form factor series from InCoax, designed for high-density deployments with shared coax infrastructure. It delivers symmetrical broadband services up to 2.5 Gbps per coax port with low latency, enabling service upgrades without replacing in-building wiring. The unit includes eight coax ports for distribution across multiple risers, supporting up to 31 network termination devices (NTE modems) per port and up to 248 in total (typically 64), depending on network topology. The ER designation refers to an extended range version with increased output power and link budget, designed for point-to-multipoint coaxial networks and more demanding in-building environments. The D2508 ER represents an important step in strengthening the D-series platform to better address varying building sizes and deployment requirements. By reusing existing coax infrastructure, the D2508 ER reduces the need for new in-building wiring and tenant access. This enables faster deployment, lower in-building CAPEX, and shorter time to revenue, while supporting service activation across more apartments, including at lower take-up rates. The platform includes eQoS for MoCA Access 2.5, enabling traffic prioritization and predictable performance under load across connected subscribers. It operates across a wide frequency range and coexists with legacy TV services and DOCSIS 3.0, allowing service upgrades without disrupting existing services. The D2508 ER supports GPON, XG-PON, XGS-PON and Active Ethernet through a 1 /2.5 /10 Gbps SFP+ uplink. It also supports remote management via standard interfaces and integration with InCoax Manage EMS or external systems. The IP67-rated enclosure with passive cooling supports both indoor and outdoor installation, including basements, pedestals or manholes at the building entry point. The D2508 ER is part of the InCoax D-series platform, designed to support scalable and efficient broadband extension across a wide range of building types and deployment scenarios. Leveraging existing in-building coax infrastructure, the platform enables both Fiber Access Extension and Fixed Wireless Access (FWA) extension with high performance and cost efficiency. The D2508 ER is available in regional variants for EU, US and UK markets. 
