New Risk • May 18
New major risk - Market cap size The company's market capitalization is less than US$10m. Market cap: AU$13.7m (US$9.78m) This is considered a major risk. Companies with a small market capitalization are most likely businesses that have not yet released a product to market or are simply a very small company without a wide reach. Either way, risk is elevated with these companies because there is a chance the product may not come to fruition or the company's addressable market or demand may not be as large as expected. In addition, if the company's size is the main factor, it is less likely to have many investors and analysts following it and scrutinizing its performance and outlook. Currently, the following risks have been identified for the company: Major Risks Earnings have declined by 10% per year over the past 5 years. Shareholders have been substantially diluted in the past year (37% increase in shares outstanding). Revenue is less than US$1m (AU$283k revenue, or US$202k). Market cap is less than US$10m (AU$13.7m market cap, or US$9.78m). Minor Risk Share price has been volatile over the past 3 months (14% average weekly change). New Risk • May 13
New minor risk - Share price stability The company's share price has been volatile over the past 3 months. It is more volatile than 75% of Australian stocks, typically moving 14% a week. This is considered a minor risk. Share price volatility indicates the stock is highly sensitive to market conditions or economic conditions rather than being sensitive to its own business performance, which may also be inconsistent. It also increases the risk of potential losses in the short term as the stock tends to have larger drops in price more frequently than other stocks. Currently, the following risks have been identified for the company: Major Risks Earnings have declined by 10% per year over the past 5 years. Shareholders have been substantially diluted in the past year (37% increase in shares outstanding). Revenue is less than US$1m (AU$283k revenue, or US$205k). Minor Risks Share price has been volatile over the past 3 months (14% average weekly change). Market cap is less than US$100m (AU$16.3m market cap, or US$11.8m). Ankündigung • May 02
Green Technology Metals Limited has filed a Follow-on Equity Offering in the amount of AUD 7 million. Green Technology Metals Limited has filed a Follow-on Equity Offering in the amount of AUD 7 million.
Security Name: Ordinary Shares
Security Type: Common Stock
Securities Offered: 80,000,000
Price\Range: AUD 0.02
Discount Per Security: AUD 0.0012
Security Name: Ordinary Shares
Security Type: Common Stock
Securities Offered: 270,000,000
Price\Range: AUD 0.02
Discount Per Security: AUD 0.0012
Transaction Features: Subsequent Direct Listing New Risk • May 01
New major risk - Revenue and earnings growth Earnings have declined by 10% per year over the past 5 years. This is considered a major risk. Ultimately, shareholders want to see a good return on their investment and that generally comes from sharing in the company's profits. If profits are declining over an extended period, then in most cases the share price will decline over time unless the company can turn around its fortunes. A trend of falling earnings can be very difficult to turn around. If the company is well already established it may also be a sign the company has matured and is in decline. In addition, if the company pays dividends it will also likely need to reduce or cut them, striking a dual blow to total shareholder returns. Currently, the following risks have been identified for the company: Major Risks Earnings have declined by 10% per year over the past 5 years. Shareholders have been substantially diluted in the past year (41% increase in shares outstanding). Revenue is less than US$1m (AU$283k revenue, or US$204k). Minor Risk Market cap is less than US$100m (AU$15.0m market cap, or US$10.8m). Price Target Changed • Apr 24
Price target decreased by 8.4% to AU$0.11 Down from AU$0.12, the current price target is an average from 2 analysts. New target price is 252% above last closing price of AU$0.031. Stock is down 3.1% over the past year. The company is forecast to post a net loss per share of AU$0.005 next year compared to a net loss per share of AU$0.017 last year. New Risk • Mar 17
New major risk - Financial position The company has less than a year of cash runway based on its current free cash flow trend. Free cash flow: -AU$11m This is considered a major risk. With less than a year's worth of cash, the company will need to raise capital or take on debt unless its cash flows improve. This would dilute existing shareholders or increase balance sheet risk. Currently, the following risks have been identified for the company: Major Risks Less than 1 year of cash runway based on free cash flow trend (-AU$11m free cash flow). Shareholders have been substantially diluted in the past year (67% increase in shares outstanding). Revenue is less than US$1m. Minor Risks Currently unprofitable and not forecast to become profitable over next 2 years (AU$3.0m net loss in 2 years). Share price has been volatile over the past 3 months (13% average weekly change). Significant insider selling over the past 3 months (AU$1.8m sold). Market cap is less than US$100m (AU$20.8m market cap, or US$14.7m). New Risk • Nov 29
New major risk - Share price stability The company's share price has been highly volatile over the past 3 months. It is more volatile than 90% of Australian stocks, typically moving 19% a week. This is considered a major risk. Share price volatility increases the risk of potential losses in the short-term as the stock tends to have larger drops in price more frequently than other stocks. It may also indicate the stock is highly sensitive to market conditions or economic conditions rather than being sensitive to its own business performance, which may also be inconsistent. Currently, the following risks have been identified for the company: Major Risks Share price has been highly volatile over the past 3 months (19% average weekly change). Shareholders have been substantially diluted in the past year (53% increase in shares outstanding). Revenue is less than US$1m (AU$401k revenue, or US$262k). Minor Risks Currently unprofitable and not forecast to become profitable over next 2 years (AU$3.0m net loss in 2 years). Market cap is less than US$100m (AU$26.7m market cap, or US$17.5m). New Risk • Nov 01
New major risk - Shareholder dilution The company's shareholders have been substantially diluted in the past year. Increase in shares outstanding: 53% This is considered a major risk. Shareholder dilution occurs when there is an increase in the number of shares on issue that is not proportionally distributed between all shareholders. Often due to the company raising equity capital or some options being converted into stock. All else being equal, if there are more shares outstanding then each existing share will be entitled to a lower proportion of the company's total earnings, thus reducing earnings per share (EPS). While dilution might not always result in lower EPS (like if the company is using the capital to fund an EPS accretive acquisition) in a lot cases it does, along with lower dividends per share and less voting power at shareholder meetings. Currently, the following risks have been identified for the company: Major Risks Shareholders have been substantially diluted in the past year (53% increase in shares outstanding). Revenue is less than US$1m (AU$401k revenue, or US$262k). Minor Risks Currently unprofitable and not forecast to become profitable over next 2 years (AU$3.0m net loss in 2 years). Share price has been volatile over the past 3 months (17% average weekly change). Market cap is less than US$100m (AU$15.4m market cap, or US$10.1m). Ankündigung • Oct 13
Green Technology Metals Limited has filed a Follow-on Equity Offering in the amount of AUD 4.5 million. Green Technology Metals Limited has filed a Follow-on Equity Offering in the amount of AUD 4.5 million.
Security Name: Ordinary Shares
Security Type: Common Stock
Securities Offered: 118,792,510
Price\Range: AUD 0.028
Discount Per Security: AUD 0.00168
Security Name: Ordinary Shares
Security Type: Common Stock
Securities Offered: 41,921,776
Price\Range: AUD 0.028
Discount Per Security: AUD 0.00168
Transaction Features: Subsequent Direct Listing Ankündigung • Oct 08
Green Technology Metals Limited, Annual General Meeting, Nov 27, 2025 Green Technology Metals Limited, Annual General Meeting, Nov 27, 2025. New Risk • Oct 06
New major risk - Market cap size The company's market capitalization is less than US$10m. Market cap: AU$14.7m (US$9.72m) This is considered a major risk. Companies with a small market capitalization are most likely businesses that have not yet released a product to market or are simply a very small company without a wide reach. Either way, risk is elevated with these companies because there is a chance the product may not come to fruition or the company's addressable market or demand may not be as large as expected. In addition, if the company's size is the main factor, it is less likely to have many investors and analysts following it and scrutinizing its performance and outlook. Currently, the following risks have been identified for the company: Major Risks Less than 1 year of cash runway based on free cash flow trend (-AU$15m free cash flow). Revenue is less than US$1m (AU$401k revenue, or US$264k). Market cap is less than US$10m (AU$14.7m market cap, or US$9.72m). Minor Risks Currently unprofitable and not forecast to become profitable over next 2 years (AU$3.0m net loss in 2 years). Share price has been volatile over the past 3 months (16% average weekly change). Shareholders have been diluted in the past year (22% increase in shares outstanding). New Risk • Oct 01
New major risk - Financial position The company has less than a year of cash runway based on its current free cash flow trend. Free cash flow: -AU$15m This is considered a major risk. With less than a year's worth of cash, the company will need to raise capital or take on debt unless its cash flows improve. This would dilute existing shareholders or increase balance sheet risk. Currently, the following risks have been identified for the company: Major Risks Less than 1 year of cash runway based on free cash flow trend (-AU$15m free cash flow). Shareholders have been substantially diluted in the past year (35% increase in shares outstanding). Minor Risks Currently unprofitable and not forecast to become profitable over next 2 years (AU$3.0m net loss in 2 years). Share price has been volatile over the past 3 months (17% average weekly change). Revenue is less than US$5m (AU$3.1m revenue, or US$2.0m). Market cap is less than US$100m (AU$16.6m market cap, or US$11.0m). New Risk • Sep 26
New minor risk - Financial data availability The company's latest financial reports are more than 6 months old. Last reported fiscal period ended December 2024. This is considered a minor risk. If the company has not reported its earnings on time, it may have been delayed due to audit problems or it may be finding it difficult to reconcile its accounts. Currently, the following risks have been identified for the company: Major Risks Shareholders have been substantially diluted in the past year (35% increase in shares outstanding). Revenue is less than US$1m (AU$1.1m revenue, or US$718k). Minor Risks Latest financial reports are more than 6 months old (reported December 2024 fiscal period end). Currently unprofitable and not forecast to become profitable over next 2 years (AU$3.0m net loss in 2 years). Share price has been volatile over the past 3 months (17% average weekly change). Market cap is less than US$100m (AU$16.2m market cap, or US$10.6m). Ankündigung • Jul 25
Green Technology Metals Ltd Announces Large, High-Grade Rubidium Resource at Seymour Project, Ontario Green Technology Metals Ltd. announced a significant milestone at its Seymour Project in Ontario, Canada, with the release of a maiden Rubidium Mineral Resource. Hosted within the same pegmatite system as the company's lithium resource at North Aubry, this Rubidium discovery has the potential to convert material previously considered waste into a valuable by-product stream. Recognised as a critical mineral by both the United States and Japan, Rubidium plays a key role in advanced electronics, aerospace, quantum computing, and defence applications. GT1's vertically integrated strategy now offers exposure to multiple high-value markets through this exciting new resource. New Risk • Jul 18
New minor risk - Share price stability The company's share price has been volatile over the past 3 months. It is more volatile than 75% of Australian stocks, typically moving 13% a week. This is considered a minor risk. Share price volatility indicates the stock is highly sensitive to market conditions or economic conditions rather than being sensitive to its own business performance, which may also be inconsistent. It also increases the risk of potential losses in the short term as the stock tends to have larger drops in price more frequently than other stocks. Currently, the following risks have been identified for the company: Major Risks Earnings have declined by 19% per year over the past 5 years. Shareholders have been substantially diluted in the past year (48% increase in shares outstanding). Revenue is less than US$1m (AU$1.1m revenue, or US$716k). Market cap is less than US$10m (AU$13.8m market cap, or US$8.99m). Minor Risk Share price has been volatile over the past 3 months (13% average weekly change). New Risk • Apr 30
New major risk - Shareholder dilution The company's shareholders have been substantially diluted in the past year. Increase in shares outstanding: 44% This is considered a major risk. Shareholder dilution occurs when there is an increase in the number of shares on issue that is not proportionally distributed between all shareholders. Often due to the company raising equity capital or some options being converted into stock. All else being equal, if there are more shares outstanding then each existing share will be entitled to a lower proportion of the company's total earnings, thus reducing earnings per share (EPS). While dilution might not always result in lower EPS (like if the company is using the capital to fund an EPS accretive acquisition) in a lot cases it does, along with lower dividends per share and less voting power at shareholder meetings. Currently, the following risks have been identified for the company: Major Risks Earnings are forecast to decline by an average of 94% per year for the foreseeable future. Shareholders have been substantially diluted in the past year (44% increase in shares outstanding). Revenue is less than US$1m (AU$1.1m revenue, or US$702k). Market cap is less than US$10m (AU$13.0m market cap, or US$8.28m). Minor Risks Currently unprofitable and not forecast to become profitable over next 2 years (AU$39m net loss in 2 years). Share price has been volatile over the past 3 months (15% average weekly change). Ankündigung • Apr 11
Green Technology Metals Limited Completes Optimised Preliminary Economic Assessment for the Standalone Root Lithium Project Green Technology Metals Limited announced the completion of its optimised Preliminary Economic Assessment ("PEA") for the standalone Root Lithium Project. The updated PEA outlines a robust development pathway for the Root Project, featuring a combination. Executive Summary. The Company previously completed a Preliminary Economic Assessment (PEA) in December 20232, which assessed two overall project development scenarios: a combined mine and concentrators development at Seymour and Root, and. b) an integrated project with a converter for battery-grade lithium hydroxide production. The Company has now completed a standalone PEA for the Root project, that considers: "The updated Root Mineral Resource estimate (MRE) of 20.1Mt @ 1.24% (including 10.0 Mt at 1.33% Li2O in the Indicated category and 10.1 Mt at 1.13% Li2O in the Inferred category3. The study highlights strong projected economics for the Project, underpinned by an extended mine and processing life, attractive capital and operating cost profiles, and a favourable low corporate tax environment. In addition to these robust fundamentals, the Project offers further upside potential through future optimisation and resource growth. The results confirm the economic viability of the project, reaffirming GT1's potential to become a significant North American producer of lithium concentrates and to progress further project studies and development efforts. Root Project Resource Update. The standalone PEA is underpinned by the recently announced 2025 Mineral Resource Estimate, which identified 20.1Mt @1.24% These compared to a USD 2,500 pit shell used in the 2023 PEA for both the Root Bay & McCombe pits, which were previously only considered for Open pit development. The new shells and pit design, coupled with underground development, significantly reduce total material movement, waste placement and storage by ~70%, with significant subsequent mining cost savings. Underground mining cost and development parameters are based on benchmark data from underground operations. The revised geotechnical parameters result in reduced waste removal with subsequent reduction in mining costs. Mine Development.cept mine development plans and costs were prepared for each option in Table 1, with key details summarised in Table 2. Preliminary cashflow analysis was conducted to rank the mine development options and select an option as the basis for this optimised PEA. Mine pre-production previously CAD 79 million. Contingency set at 15%. Mining pre-production capex. Mining SCHEDULE. Several pricing sources were sourced for this PEA update and to assess an average price over the production period, making use of SC6 pricing forecasts from several sources including EcoPro Innovation (GT1 strategic partner), Fastmarkets, Benchmark Mineral Intelligence and Wood Mackenzie, from which an average annual spodumene concentrate price was used for the and adjusted for 5.5% Li2O spodumene concentrate (SC5.5) product. Given the early stage of the project a preliminary financing strategy has been considered and will be further developed closer to the completion of the Definitive Feasibility Study which is due to be completed in 2026. The current strategy which is well structured at this early stage gives the Company confidence that the project's strong preliminary economics will attract support to continue with the next stages of development studies. New Risk • Mar 14
New major risk - Share price stability The company's share price has been highly volatile over the past 3 months. It is more volatile than 90% of Australian stocks, typically moving 16% a week. This is considered a major risk. Share price volatility increases the risk of potential losses in the short-term as the stock tends to have larger drops in price more frequently than other stocks. It may also indicate the stock is highly sensitive to market conditions or economic conditions rather than being sensitive to its own business performance, which may also be inconsistent. Currently, the following risks have been identified for the company: Major Risks Share price has been highly volatile over the past 3 months (16% average weekly change). Earnings are forecast to decline by an average of 81% per year for the foreseeable future. Market cap is less than US$10m (AU$15.6m market cap, or US$9.81m). Minor Risks Currently unprofitable and not forecast to become profitable over next 2 years (AU$38m net loss in 2 years). Shareholders have been diluted in the past year (22% increase in shares outstanding). Revenue is less than US$5m (AU$3.7m revenue, or US$2.3m). Ankündigung • Mar 14
Green Technology Metals Limited has filed a Follow-on Equity Offering in the amount of AUD 4 million. Green Technology Metals Limited has filed a Follow-on Equity Offering in the amount of AUD 4 million.
Security Name: Ordinary Shares
Security Type: Common Stock
Securities Offered: 75,000,000
Price\Range: AUD 0.04
Discount Per Security: AUD 0.0024
Security Name: Ordinary Shares
Security Type: Common Stock
Securities Offered: 25,000,000
Price\Range: AUD 0.04
Transaction Features: Rights Offering New Risk • Mar 11
New minor risk - Financial position The company has less than a year of cash runway based on its current free cash flow. Free cash flow: -AU$19m This is considered a minor risk. With less than a year's worth of cash, the company will need to raise capital or take on debt unless its cash flows improve. This would dilute existing shareholders or increase balance sheet risk. Currently, the following risks have been identified for the company: Major Risk Earnings are forecast to decline by an average of 81% per year for the foreseeable future. Minor Risks Less than 1 year of cash runway based on current free cash flow (-AU$19m). Currently unprofitable and not forecast to become profitable over next 2 years (AU$38m net loss in 2 years). Share price has been volatile over the past 3 months (13% average weekly change). Shareholders have been diluted in the past year (22% increase in shares outstanding). Revenue is less than US$5m (AU$3.7m revenue, or US$2.3m). Market cap is less than US$100m (AU$19.4m market cap, or US$12.2m). New Risk • Dec 26
New minor risk - Share price stability The company's share price has been volatile over the past 3 months. It is more volatile than 75% of Australian stocks, typically moving 12% a week. This is considered a minor risk. Share price volatility indicates the stock is highly sensitive to market conditions or economic conditions rather than being sensitive to its own business performance, which may also be inconsistent. It also increases the risk of potential losses in the short term as the stock tends to have larger drops in price more frequently than other stocks. Currently, the following risks have been identified for the company: Major Risks Earnings are forecast to decline by an average of 57% per year for the foreseeable future. Revenue is less than US$1m (AU$943k revenue, or US$588k). Minor Risks Currently unprofitable and not forecast to become profitable over next 3 years (AU$66m net loss in 3 years). Share price has been volatile over the past 3 months (12% average weekly change). Shareholders have been diluted in the past year (23% increase in shares outstanding). Market cap is less than US$100m (AU$24.1m market cap, or US$15.0m). Ankündigung • Oct 22
Green Technology Metals Limited, Annual General Meeting, Nov 28, 2024 Green Technology Metals Limited, Annual General Meeting, Nov 28, 2024. Location: 1 338 barker road, subiaco wa 6008 Australia New Risk • Sep 30
New minor risk - Financial data availability The company's latest financial reports are more than 6 months old. Last reported fiscal period ended December 2023. This is considered a minor risk. If the company has not reported its earnings on time, it may have been delayed due to audit problems or it may be finding it difficult to reconcile its accounts. Currently, the following risks have been identified for the company: Major Risks Earnings are forecast to decline by an average of 12% per year for the foreseeable future. Revenue is less than US$1m. Minor Risks Latest financial reports are more than 6 months old (reported December 2023 fiscal period end). Currently unprofitable and not forecast to become profitable over next 2 years (AU$10m net loss in 2 years). Share price has been volatile over the past 3 months (13% average weekly change). Shareholders have been diluted in the past year (28% increase in shares outstanding). Market cap is less than US$100m (AU$32.1m market cap, or US$22.2m). Ankündigung • Aug 23
Green Technology Metals Limited, Annual General Meeting, Sep 26, 2024 Green Technology Metals Limited, Annual General Meeting, Sep 26, 2024. Location: level 1, 338 barker road, subiaco western australia 6008, Australia Ankündigung • Aug 22
Green Technology Metals Limited announced that it expects to receive AUD 8 million in funding from Eco Pro Innovation Co., Ltd. Green Technology Metals Limited announced that it has signed a binding conditional subscription agreement to issue 64,000,000 common shares at a price of AUD 0.125 per share for the gross proceeds of AUD 8,000,000 on August 20, 2024. The transaction will include participation from Eco Pro Innovation Co., Ltd. The shares will have an escrow period. The shares will be issued on 2 tranches, that is for 31,000,000 and 32,000,000 respectively. New Risk • Aug 21
New major risk - Revenue and earnings growth Earnings are forecast to decline by an average of 12% per year for the foreseeable future. This is considered a major risk. Ultimately, shareholders want to see a good return on their investment and that generally comes from sharing in the company's profits. If profits are expected to decline, then in most cases the share price will decline over time as well. In addition, if the company pays dividends it will also likely need to reduce or cut them, striking a dual blow to total shareholder returns. Currently, the following risks have been identified for the company: Major Risks Earnings are forecast to decline by an average of 12% per year for the foreseeable future. Revenue is less than US$1m. Minor Risks Less than 1 year of cash runway based on current free cash flow (-AU$48m). Currently unprofitable and not forecast to become profitable over next 2 years (AU$10m net loss in 2 years). Share price has been volatile over the past 3 months (13% average weekly change). Shareholders have been diluted in the past year (17% increase in shares outstanding). Market cap is less than US$100m (AU$27.3m market cap, or US$18.4m). Ankündigung • Aug 20
Green Technology Metals Limited has filed a Follow-on Equity Offering. Green Technology Metals Limited has filed a Follow-on Equity Offering.
Security Name: Ordinary Shares
Security Type: Common Stock
Security Name: Ordinary Shares
Security Type: Common Stock
Transaction Features: Subsequent Direct Listing New Risk • Mar 16
New major risk - Financial position The company has less than a year of cash runway based on its current free cash flow trend. Free cash flow: -AU$26m This is considered a major risk. With less than a year's worth of cash, the company will need to raise capital or take on debt unless its cash flows improve. This would dilute existing shareholders or increase balance sheet risk. Currently, the following risks have been identified for the company: Major Risks Less than 1 year of cash runway based on free cash flow trend (-AU$26m free cash flow). Earnings are forecast to decline by an average of 72% per year for the foreseeable future. Revenue is less than US$1m (AU$503k revenue, or US$330k). Minor Risks Currently unprofitable and not forecast to become profitable over next 2 years (AU$33m net loss in 2 years). Share price has been volatile over the past 3 months (14% average weekly change). Shareholders have been diluted in the past year (26% increase in shares outstanding). Market cap is less than US$100m (AU$51.0m market cap, or US$33.5m). Recent Insider Transactions • Mar 01
Executive Director recently bought AU$97k worth of stock On the 23rd of February, Cameron Henry bought around 750k shares on-market at roughly AU$0.13 per share. This transaction amounted to 7.1% of their direct individual holding at the time of the trade. In the last 3 months, there was an even bigger purchase from another insider worth AU$196k. Insiders have collectively bought AU$493k more in shares than they have sold in the last 12 months. New Risk • Feb 28
New minor risk - Share price stability The company's share price has been volatile over the past 3 months. It is more volatile than 75% of Australian stocks, typically moving 13% a week. This is considered a minor risk. Share price volatility indicates the stock is highly sensitive to market conditions or economic conditions rather than being sensitive to its own business performance, which may also be inconsistent. It also increases the risk of potential losses in the short term as the stock tends to have larger drops in price more frequently than other stocks. Currently, the following risks have been identified for the company: Major Risks Earnings are forecast to decline by an average of 61% per year for the foreseeable future. Revenue is less than US$1m (AU$724k revenue, or US$471k). Minor Risks Currently unprofitable and not forecast to become profitable over next 3 years (AU$52m net loss in 3 years). Share price has been volatile over the past 3 months (13% average weekly change). Shareholders have been diluted in the past year (26% increase in shares outstanding). Market cap is less than US$100m (AU$46.2m market cap, or US$30.0m). Recent Insider Transactions • Jan 05
Non-Executive Director recently bought AU$100k worth of stock On the 2nd of January, Patrick Murphy bought around 363k shares on-market at roughly AU$0.28 per share. This transaction amounted to less than 1% of their direct individual holding at the time of the trade. In the last 3 months, there was an even bigger purchase from another insider worth AU$196k. Insiders have collectively bought AU$396k more in shares than they have sold in the last 12 months. Recent Insider Transactions • Dec 25
Executive Director recently bought AU$100k worth of stock On the 18th of December, Cameron Henry bought around 386k shares on-market at roughly AU$0.26 per share. This transaction amounted to 3.8% of their direct individual holding at the time of the trade. In the last 3 months, there was an even bigger purchase from another insider worth AU$196k. Insiders have collectively bought AU$296k more in shares than they have sold in the last 12 months. Recent Insider Transactions • Dec 17
Chairman recently bought AU$196k worth of stock On the 13th of December, John Young bought around 750k shares on-market at roughly AU$0.26 per share. This transaction amounted to 12% of their direct individual holding at the time of the trade. This was the largest purchase by an insider in the last 3 months. This was John's only on-market trade for the last 12 months. Ankündigung • Dec 12
Green Technology Metals Limited (ASX:GT1) acquired Lithium Claim Blocks from Landore Resources Canada Inc. for CAD 1.6 million. Green Technology Metals Limited (ASX:GT1) has executed a sale and purchase agreement to acquire Lithium Claim Blocks from Landore Resources Canada Inc. for CAD 1.6 million on October 4, 2023. GT1 will pay Landore Canada a cash payment of CAD 1 million(£602,410) (expected to be received within the month) (the "Cash Consideration"). Share based consideration, comprising the issuance of 1,628,624 new ordinary shares in GT1 to Landore Resources, which has a value of approximately CAD 0.6 million. The Cash Consideration received by Landore Resources will be applied towards the Company's working capital requirements.Green Technology Metals Limited (ASX:GT1) completed the acquisition of Lithium Claim Blocks from Landore Resources Canada Inc. on December 11, 2023. Ankündigung • Dec 11
Green Technology Metals Limited has completed a Follow-on Equity Offering in the amount of AUD 14.606742 million. Green Technology Metals Limited has completed a Follow-on Equity Offering in the amount of AUD 14.606742 million.
Security Name: Ordinary Shares
Security Type: Common Stock
Securities Offered: 39,477,680
Price\Range: AUD 0.37
Discount Per Security: AUD 0.01665
Transaction Features: Subsequent Direct Listing Price Target Changed • Oct 18
Price target decreased by 12% to AU$1.48 Down from AU$1.68, the current price target is an average from 2 analysts. New target price is 217% above last closing price of AU$0.47. Stock is down 45% over the past year. The company is forecast to post a net loss per share of AU$0.057 next year compared to a net loss per share of AU$0.034 last year. New Risk • Aug 15
New minor risk - Market cap size The company's market capitalization is less than US$100m. Market cap: AU$153.3m (US$99.7m) This is considered a minor risk. Companies with a small market capitalization are most likely businesses that have not yet released a product to market or are simply a very small company without a wide reach. Either way, risk is elevated with these companies because there is a chance the product may not come to fruition or the company's addressable market or demand may not be as large as expected. In addition, if the company's size is the main factor, it is less likely to have many investors and analysts following it and scrutinizing its performance and outlook. Currently, the following risks have been identified for the company: Major Risks Less than 1 year of cash runway based on free cash flow trend (-AU$41m free cash flow). Earnings are forecast to decline by an average of 35% per year for the foreseeable future. Revenue is less than US$1m. Minor Risks Currently unprofitable and not forecast to become profitable over next 3 years (AU$17m net loss in 3 years). Shareholders have been diluted in the past year (8.8% increase in shares outstanding). Market cap is less than US$100m (AU$153.3m market cap, or US$99.7m). Ankündigung • Jan 10
Green Technology Metals Limited Announces High-Grade Lithium Assay Results from Its 100%-Owned Root Project Green Technology Metals Limited announced further high-grade lithium assay results from its 100%-owned Root Project, located approximately 200km west of its flagship Seymour Project in Ontario, Canada. Drilling at Root was initially focussed on the McCombe LCT pegmatite system, targeting rapid delineation of a maiden Mineral Resource Estimate, but has now expanded to the Morrison prospect, situated 1 km east of McCombe. Drilling is actively underway in 2023 with 2 drill rigs working day + night shift at Root. McCombe Deposit (Root Project): The McCombe LCT (Lithium-Caesium-Tantalum) pegmatite is currently the most advanced prospect at the Root Project. Historical drilling completed by previous owners from 1950 to 2016 intersected numerous pegmatites, generally dipping to the south and striking east-west. Phase 1 and Phase 2 drilling by GT1 has now demonstrated McCombe to be a simpler mineralised system consisting of: one major pegmatite averaging 10m true thickness (ranging 2m to 19m), striking east-west with shallow dip approximately 30 degrees to the south, open along strike and down dip; four pegmatites striking north-east with shallow to moderate dip to the south located in the northeast quadrant, all open along strike and down dip. Phase 1 drilling at McCombe is now complete, comprising of twenty-two (22) resource definition diamond holes. Assays have been returned for all twenty-two (22) holes and have intersected thick and continuous high grade spodumene pegmatites from surface in all 22 holes. The Phase 1 drilling has delineated, extended, and simplified the historical mineralised pegmatites in all directions, Phase 2 drilling will continue to explore the pegmatites along strike and down dip in the coming weeks for incorporation into the maiden Mineral Resource Estimate. Morrison Deposit (Root Project): The Morrison LCT spodumene pegmatites, located approximately 1km east of McCombe, were explored in the mid to late 1950's. The pegmatites strike east west and dip about 30 degrees towards the south. Outcrop of the pegmatite is approximately 200m long and tested by trenching, but historical drilling has also proven the strike of the pegmatite to be at least 1.6km to the west with additional occurrences to the north. Initial drilling at Morrison comprising of twenty (20) holes for 2,500m is targeted to confirm historical drilling and sampling. The second phase of drilling is then planned to test for extensions of the mineralised pegmatites in all directions, infill key sections and rapidly facilitate delineation of a Mineral Resource estimate. Six (6) diamond holes were completed at the end of December and logging and assaying has now commenced. Ankündigung • Dec 24
Green Technology Metals Limited Announces Production of Coarse Spodumene Concentrate At Seymour Green Technology Metals Limited announced very high spodumene concentrate recoveries from its 100%-owned Seymour Project, located approximately 250km north of Thunder Bay in Ontario, Canada. The spodumene concentrate represents a critical milestone for the business and future off-take partners. Four composite samples totalling approximately 1000kg of recent and historic diamond core, derived from the Seymour pegmatite was selected, and shipped for testing. The samples represent the different mineralisation phases seen in the pegmatite within, what GT1 expect to be, the final open pit mine shell at Seymour. Heavy liquid separation (HLS) test work was undertaken at SGS Canada's facilities in Lakefield, Ontario. SGS compiled a master composite, based on the four samples selected, to provide a preliminary indication of the lithium beneficiation performance by utilising dense media separation (DMS). The Seymour bulk sample permit has been approved by the Ontario Mines Department (MNDM) and sampling is planned to begin in January 2023 where company will be extracting approximately ninety-nine tonnes from the North Aubry pegmatite outcrop within the Seymour project. The spodumene concentrate produced through the pilot work will be used as feed stock for the Lithium Hydroxide Conversion Program (LHCP), all forming part of the ongoing feasibility study. HIGHLIGHTS: Flagship Seymour concentrate recovery exceeds 72% using heavy liquid separation; Confirms simple 2 stage DMS flowsheet potential; Critical milestone for the PEA and future off-take partners; Test work based on 1000kg of representative composites as per preliminary mine plan; Very high recovery due to large spodumene crystal size; Concentrates now being sent for conversion work to Lithium Hydroxide. Ankündigung • Dec 15
Green Technology Metals Limited Announces High-Grade Lithium Assay Results from Its 100%-Owned Root Project, Located Approximately 200Km West of Its Flagship Seymour Project in Ontario, Canada Green Technology Metals Limited announced further high-grade lithium assay results from its 100%-owned Root Project, located approximately 200km west of its flagship Seymour Project in Ontario, Canada. Drilling at Root initially focussed on the McCombe LCT pegmatite system, targeting rapid delineation of a maiden Mineral Resource Estimate, and has now expanded to the Morrison prospect. McCombe Deposit (Root Project): The McCombe LCT (Lithium-Caesium-Tantalum) pegmatite is currently the most advanced prospect at the Root Project. Historical drilling completed by previous owners from 1950 to 2016 intersected numerous pegmatites, generally dipping to the south and striking east-west. Phase 1 and Phase 2 drilling by GT1 has now demonstrated McCombe to be a simpler mineralised system consisting of: one major pegmatite averaging 10m true thickness (ranging 2m to 19m), striking east-west with shallow dip approximately 30 degrees to the south, open along strike and down dip; two pegmatites striking north-east with shallow to moderate dip to the south with hole RL-22-532 intersecting (down hole): 11.5m @ 5% visual spodumene from 90.2m; 21.9m @ 20% visual spodumene from 111.3m; 20.8m @ 20% visual spodumene from 156.0m. Phase 1 drilling at McCombe is now complete, comprising of twenty-two (22) resource definition diamond holes. Assays have been returned for all twenty-two (22) holes, all intersected thick and continuous high grade spodumene pegmatites from surface. The Phase 1 drilling has delineated, extended, and simplified the historical mineralised pegmatites in all directions, Phase 2 drilling will be completed in the coming weeks for incorporation into the maiden Mineral Resource Estimate. Morrison Deposit (Root Project): The Morrison LCT spodumene pegmatites, located approximately 1km east of McCombe, were explored by Consolidated Morrison Explorations Ltd. in the mid to late 1950's. The pegmatites strike east west and dip about 30 degrees towards the south. Outcrop of the pegmatite is approximately 200m long and tested by trenching, but historical drilling has also proven the strike of the pegmatite to be at least 1.6km to the west with additional occurrences to the north. Initial drilling at Morrison (Twenty (20) holes for 2,500m) is targeted to confirm historical drilling and sampling. The second phase of drilling is then planned to test for extensions of the mineralised pegmatites in all directions, infill key sections and rapidly facilitate delineation of a Mineral Resource estimate. The Root Project is readily accessible via all-weather roads and airports with emergency response capability in Slate Falls and Sioux Lookout. The Transcontinental railway connects Root and Seymour projects with a direct line and sidings managed by CN Rail. Hydro power lines run through the eastern side of the Root Project electrifying the region with green energy. Ankündigung • Nov 22
Green Technology Metals Limited Announces High-Grade Lithium Assay Results from Its 100%-Owned Root Project, Located Approximately 200Km West of Its Seymour Project in Ontario, Canada Green Technology Metals Limited announced further high-grade lithium assay results from its 100%-owned Root Project, located approximately 200km west of its Seymour Project in Ontario, Canada. Drilling at Root is initially focused on the McCombe LCT pegmatite system, targeting rapid delineation of a maiden Mineral Resource estimate for this deposit. The McCombe LCT (Lithium-Caesium-Tantalum) pegmatite is currently the most advanced prospect at the Root Project. Historical drilling completed by previous owners from 1950 to 2016 intersected numerous pegmatites, generally dipping to the south and striking east-west. Phase 1 and Phase 2 drilling by GT1 has now demonstrated McCombe to be a much simpler mineralised system: one major pegmatite averaging 10m thickness (ranging 2m to 19m), striking east-west with shallow dip approximately 30 degrees to the south, and a second pegmatite striking northeast with similar thickness. The average grades, spodumene crystal size and crystal mass returned in the recent drilling at McCombe correlate well with the historic down dip continuity drill hole completed in 2016, which intercepted 67m @ 1.75% Li2O. A second similar pegmatite has been intersected at the mid-point of the main pegmatite striking northeast and dipping to the southeast, with further targeted drilling set to extend this pegmatite to its natural limits. Phase 1 drilling at McCombe has been completed, comprised of twenty-two (22) resource definition diamond holes. Assays have been returned for fourteen (14) holes all intersected thick and continuous high grade spodumene pegmatites from surface with the recent holes returning the highest-grade intercept to date, 2m @ 4.06% Li20 (RL-22-0013) within a broader 8m pegmatite intercept averaging 1.72% Li20 from 64m downhole. Assays are still pending for the last eight (8) holes and are expected to be received in the coming weeks. Phase 2 extensional diamond drilling at McCombe is in progress, with two drill rigs operating around-the-clock. The Phase 2 program has delivered significant expansion of the McCombe deposit already, with strong visual spodumene logged in robust extensional pegmatite intercepts. To date, nine (9) holes of the Phase 2 program have been completed, with all assays pending. Estimation of a maiden Root Mineral Resource remains on track for First Quarter 2023. The Morrison LCT spodumene pegmatites, located approximately 1km east of McCombe, were explored by Consolidated Morrison Explorations Ltd. in the mid to late 1950's. The pegmatites strike east-west and dip about 30 degrees towards the south. Outcrop of the pegmatite is about 200m long and tested by trenching, but historical drilling has also proved the strike of the pegmatite to be at least 1.6km. The Root Bay LCT spodumene pegmatite has no historical drilling, however a channel sample returned 14m @ 1.67% Li2O including 3m at 2.24% Li2O. Field exploration mapping completed by GT1 in September and October 2022 has located additional spodumene occurrences approximately 300m west along a magnetic and topographic ridge running east-west with a grab sample returning 2.39% Li2O. The initial geological model (hypothesis) has the pegmatites cross-cutting the magnetic high, north-south in a potential stacked system. Price Target Changed • Nov 16
Price target increased to AU$1.67 Up from AU$1.44, the current price target is an average from 2 analysts. New target price is 62% above last closing price of AU$1.03. Stock is up 164% over the past year. The company is forecast to post a net loss per share of AU$0.06 next year compared to a net loss per share of AU$0.037 last year. Board Change • Nov 16
No independent directors Following the recent departure of a director, there are no independent directors on the board. The company's board is composed of: No independent directors. 4 non-independent directors. Chairman John Young was the last director to join the board, commencing their role in 2021. The company's lack of independent directors is a risk according to the Simply Wall St Risk Model. Ankündigung • Nov 10
Green Technology Metals Limited Announces A New Discovery at Its Seymour Lithium Project in Ontario, Canada Green Technology Metals Limited announced a new discovery at its Seymour Lithium Project in Ontario, Canada. The new discovery, Blue Bear, is located approximately 500m south-east of the Aubry Complex, on the Pye West Limb, and sits within the same current mine permitting and baseline study boundary. The new discovery, Blue Bear, is located on a Priority 1 target zone delineated during target generation and followed up by diamond drill hole, GTDD-22-0186. During drill site preparation the dozer cleared an access track and pad for the diamond rig, exposing a small 1m2 area of bedrock beneath a thin layer of glacial till. The bedrock was quickly identified as spodumene-bearing pegmatite and subsequently confirmed by the BrukerRaman Spectrometer. Further mechanical stripping of the area has delineated a pegmatite surface exposure with similar size, geometry and orientation to the North Aubry deposit located approximately 500m northwest. As such, there also exists potential for the two deposits to be associated, including potentially connected at depth, forming a larger mineralising system which the company also plan to promptly test with step-out drilling. Delineation diamond drilling has commenced at Blue Bear starting with shallow scissor holes to determine strike and dip of the LCT pegmatite. Initial indications are showing the pegmatite is striking NNW with an apparent dip direction of ENE, dipping 10-30 degrees. Of the fourteen (14) holes drilled to date, all have intersected pegmatite and 12 have intersected significant pegmatite intercepts. Assays have been returned to date for six holes. Hole GTDD-22-0186 was the first/discovery hole, drilled in an easterly direction from the pad where the initial outcrop was uncovered, and returning 7.1m of weathered pegmatite. Two holes, GTDD-22-0359/0360, stepped out slightly to the north-east and were drilled in a broadly westerly direction against the interpreted dip, returning thick pegmatite intervals of 14.1m at 0.66% Li2O from 20.4m (including 8.7m at 0.95% Li2O) and 14.4m at 1.30% Li2O from 21.1m (including 10.8m at 1.72% Li2O), respectively. A similar directional hole, GTDD-22-0350, was drilled approximately 60m SSE of the discovery hole and returned a 13.9m pegmatite interval at 1.53% Li2O from 13.8m (including 8.8m at 2.27% Li2O). The Blue Bear discovery (on the Pye West Limb) provides strong validation of the exploration model GT1 has adopted at Seymour for target generation, in particular the ability to locate non-outcropping pegmatites beneath glacial till. This exploration model represents the compilation of multiple data sets collected and commissioned by GT1 since its inception last year. Initially, an aerial photo and LiDar survey was used to map pegmatite exposures and topography. This was rapidly followed by an aerial geophysical survey capturing radiometric and magnetic data. The accumulated data was interpreted by Southern Geoscience and broad zones delineated for further investigation. These broad zones have then been followed up by field-based activities including mapping and sampling, drone mapping (LiDar and 3D Orth mosaic photogrammetry), ground geochemistry, ground gravity and drilling of exposed pegmatites. The refined target set now offers numerous similar targets in the broader northern Seymour Project area, including along the same Pye West Limb upon which the Blue Bear discovery is situated, further validating our Exploration Target of 22 26 Mt @ 0.8-1.5% Li20. Exploration drilling programs are planned to progressively test this new target pipeline at Seymour over the next 12 months. The potential quantity and grade of Exploration Targets is conceptual in nature, there has been insufficient exploration to estimate a Mineral Resource in these areas and it is uncertain if further exploration will result in the estimation of a Mineral Resource in these areas. Ankündigung • Nov 08
Green Technology Metals Limited Announces New Discovery At Its Seymour Lithium Project in Ontario, Canada Green Technology Metals Limited announced a new discovery at its Seymour Lithium Project in Ontario, Canada. The new discovery, Blue Bear, is located approximately 500m south-east of the Aubry Complex, on the Pye West Limb, and sits within the same current mine permitting and baseline study boundary. Blue Bear: New discovery on Pye West Limb: The new discovery, Blue Bear, is located on a Priority 1 target zone delineated during target generation and followed up by diamond drill hole, GTDD-22-0186. During drill site preparation the dozer cleared an access track and pad for the diamond rig, exposing a small 1m area of bedrock beneath a thin layer of glacial till. The bedrock was quickly identified as spodumene-bearing pegmatite and subsequently confirmed by the BrukerRaman Spectrometer. Further mechanical stripping of the area has delineated a pegmatite surface exposure with similar size, geometry and orientation to the North Aubry deposit located approximately 500m northwest. As such, there also exists potential for the two deposits to be associated, including potentially connected at depth, forming a larger mineralising system which also plan to promptly test with step-out drilling. Delineation drilling in progress: Delineation diamond drilling has commenced at Blue Bear starting with shallow scissor holes to determine strike and dip of the LCT pegmatite. Initial indications are showing the pegmatite is striking NNW with an apparent dip direction of ENE, dipping 10-30 degrees. Of the fourteen (14) holes drilled to date, all have intersected pegmatite and 12 have intersected significant pegmatite Intercepts. Hole GTDD-22-0186 was the first/discovery hole, drilled in an easterly direction from the pad where the initial outcrop was uncovered, and returning 7.1m of weathered pegmatite. Two holes, GTDD-22-0359/0360, stepped out slightly to the north-east and were drilled in a broadly westerly direction against the interpreted dip, returning thick pegmatite intervals of 14.1m at 0.66% Li2O from 20.4m (including 8.7m at 0.95% Li2O) and 14.4m at 1.30% Li2O from 21.1m (including 10.8m at 1.72% Li2O), respectively. A similar directional hole, GTDD-22-0350, was drilled approximately 60m SSE of the discovery hole and returned a 13.9m pegmatite interval at 1.53% Li2O from 13.8m (including 8.8m at 2.27% Li2O). Substantial further target pipeline: The Blue Bear discovery (on the Pye West Limb) provides strong validation of the exploration model GT1 has adopted at Seymour for target generation, in particular the ability to locate non-outcropping pegmatites beneath glacial till. This exploration model represents the compilation of multiple data sets collected and commissioned by GT1 since its inception last year. Initially, an aerial photo and LiDar survey was used to map pegmatite exposures and topography. This was rapidly followed by an aerial geophysical survey capturing radiometric and magnetic data. The accumulated data was interpreted by Southern Geoscience and broad zones delineated for further investigation. These broad zones have then been followed up by field-based activities including mapping and sampling, drone mapping (LiDar and 3D Orth mosaic photogrammetry), ground geochemistry, ground gravity and drilling of exposed pegmatites. The refined target set now offers numerous similar targets in the broader northern Seymour Project area, including along the same Pye West Limb upon which the Blue Bear discovery is situated, further validating Exploration Target of 22 26 Mt @ 0.8-1.5% Li20. Exploration drilling programs are planned to progressively test this new target pipeline at Seymour over the next 12 months. Ankündigung • Oct 29
Green Technology Metals Limited Announces Inaugural Assay Results from Its 100%-Owned Root Project Green Technology Metals Limited announced inaugural assay results from its 100%-owned Root Project (McCombe Deposit), located approximately 200 km west of GT1's Seymour Project Drilling is initially focussed on the McCombe LCT pegmatite system to delineate a maiden Mineral Resource. The McCombe LCT (Lithium-Caesium-Tantalum) pegmatite is currently the most advanced prospect at the Root Project. Historical drilling completed by previous owners in 2016 saw six holes drilled, which intersected numerous pegmatites, generally dipping to the south and striking east-west. This drilling confirmed 1950 historical drill results and demonstrated the down dip continuity of the lithium mineralisation, including a key extensional intercept of 67m @ 1.75% Li2O. Diamond drilling commenced in September 2022 initially with just one drill rig operating 24/7 on the Phase 1 drilling program. Drilling was temporarily suspended for 2 weeks in October to allow First Nation traditional hunting activities to proceed without any interference. The consideration of stakeholder's traditional activities is a key part of GT1's EarlyExploration Agreement commitment to the local indigenous groups and safety commitment to the GT1 team. Drilling has now resumed with two diamond drill rigs operating on a 24/7 basis nearing completion of this 22-hole, 2,500m Phase 1 program. Ankündigung • Sep 07
Green Technology Metals Limited, Annual General Meeting, Nov 22, 2022 Green Technology Metals Limited, Annual General Meeting, Nov 22, 2022, at 09:00 W. Australia Standard Time. Ankündigung • Aug 23
Green Technology Metals Limited Provides Update from the Diamond Drilling Activity at Seymour Lithium Project Green Technology Metals Limited provided an update from the diamond drilling activity at its Seymour Lithium Project in Ontario, Canada. Diamond drilling has continued at the North Aubry deposit of GT1's Seymour Project since recommencement in June. The sustained focus of drilling at North Aubry has been further expansion of the deposit dimensions, both along strike to the north and with further down dip extensions. Hole GTDD-22-0323, which stepped out 60 metres northwest of the nearest previous hole, intersected two spodumene- bearing pegmatite intervals from 217.9m and 377.9m downhole with major intercepts of: 6.0m at 1.37% Li2O (from 218.9m to 225.0m); and 3.6m at 2.08% Li2O (from 378.3m to 382.0m).These intersections were thicker than modelled and increases the mineralised volumes in this targeted strike extension of the North Aubry deposit. Hole GTDD-22-0128 was completed approximately 230m down dip of hole GTDD-22-0323 and intersected two spodumene-bearing pegmatites from 252.3m and 312.0m downhole with major intercepts of: 2.8m at 1.48% Li2O (from 253.3m to 256.2m); and 3.4m at 0.86% Li2O (from 322.8m to 326.3m). Step-out targets are to be drilled north-east of North Aubry targeting duplication of the North Aubry mineralisation system. These targets have been designed off multilayer field data sets collected by previous exploration companies and recent data collection and collation by GT1 including: 1) Geophysical interpretation by Southern Geo Science; 2) Lidar bare-earth interpretation by MPX and Eagle Mapping; 3) Ortho mosaic interpretation by MPX and Eagle Mapping; 4) Field mapping by GT1, Fladgate and Bayside Geoscience; and 5) Target reconnaissance by GT1. The Aubry complex sits along a NE-SW magnetic high structure which is several kilometres long and has distinct magnetic low "breaks" along its strike. The magnetic low "breaks" correlate with the emplacement of the North and South Aubry pegmatites. These magnetic low "breaks" continue north of North Aubry and south of South Aubry with mapped pegmatites in these areas. For example, field mapping completed and reported by Ardiden in May 2018 located a spodumene bearing pegmatite exposure approximately 700m north-east of North Aubry along strike of the magnetic structure. The exposure is approximately 4m wide and 8m long and hasn't been drilled. As previously discussed, the North Aubry discovery started with a similar size exposure due to vegetation cover and glacial till. On-ground reconnaissance exploration at the broader Pye prospect (Pye Complex) has been very successful in tracing pegmatite exposure north-south along its strike (Pye Eastern Limb) and culminating at the interpreted syn-form keel in the north. Field geologists have also navigated part of the Pye Western Limb in preparation for target reconnaissance, mapping and drilling. Current major drilling targets at Pye set to be tested over coming months include the axial plane of the Pye syn-form as well as the western and eastern limbs of the syn-form where numerous alternating magnetic highs and lows suggest structural extension and the potential for pegmatite swarm inflows, as have occurred at North Aubry. To support the field activities at both the Aubry Complex and Pye Complex, GT1 has commissioned Abitibi Geophysics to complete a ground gravity survey. Area A will be over the North Aubry complex to calibrate known pegmatites with gravity response and Area B will be over the highly prospective Pye West Limb, which is very similar to the Aubry complex. The crew will make use of existing roads and trails so that the final mesh of gravity stations is approximately 50 m x 50 m spacing. Each area is approximately 0.5 km2, so gravity will be measured at about 400 locations within the areas. DGPS will be used for accurate station locations. Ankündigung • Aug 08
Green Technology Metals Limited Commence Drilling at Root Project Green Technology Metals Limited announced all exploration agreements and permits have been approved and site activities at the Root Project have commenced in preparation for upcoming drilling. Root is located approximately 200 km west-north-west of GT1's Seymour Project. Drilling of Seymour is set to continue in parallel with the commencement of drilling at Root. GT1 acknowledges and respects all traditional custodians of the land on which the company operate. As part of all activities, including exploration drilling programs, the company commit to meaningful consultation with indigenous partners and their representatives. The company will continue to mitigate impact where possible and preserve the environment for current and future generations. Two Early Exploration Agreements have been signed with Slate Falls and Lac Seoul First Nations, formally committing to a respectful and trusting relationship whilst exploring on their lands. Senior GT1 personnel, including CEO, Luke Cox, were recently welcomed into the Slate Falls community and Band Office where they interacted with members of the community, council, and local business owners. During this site visit, GT1 learned that one of the community members had a trapline that traversed exploration area. GT1 North American General Manager, Matt Herbert, respectfully reached out and access was negotiated and granted under a Trapline Agreement. The Exploration Target at the Root Project is based on historical mapping, sampling and drilling across the McCombe and Morrison pegmatite systems. The Exploration Target for Root is 20 to 24 Mt @ 0.8 to 1.5% Li2O. The potential quantity and grade of the Exploration Target is conceptual in nature, there has been insufficient exploration to estimate a Mineral Resource and it is uncertain if further exploration will result in the estimation of a Mineral Resource. Site activities at Root have commenced, including the construction of an all-weather camp enabling access and exploration activity year-round. G4 Drilling has already mobilised one diamond rig to site, and another rig is set to follow once the camp is operational. Drilling is planned to ramp-up from single shift to double shift. The initial 24,000m program has been based on two diamond rigs, double-shifting, to deliver a target combined monthly drilling rate of 3,000m. The priority targets are located at McCombe and Morrison, both hosting LCT pegmatites and historical mapping, sampling, drilling and assays. McCombe is the more advanced with the most recent drilling completed by Ardiden Limited in 2016. Six holes were drilled intersecting numerous pegmatites generally dipping to the south and striking east-west. This drilling both confirmed historical drill results and also demonstrated the down dip continuity of the lithium mineralisation with a key extensional intercept of 67m @ 1.75% Li2O returned. Initial drilling at McCombe will seek to extend the mineralised pegmatites in all directions, infill key sections and delineate a maiden Mineral Resource estimate. Morrison has not received any recent drilling; however detailed surface mapping was performed in 2018 which was then followed up by GT1 in October 2021. Step-out mapping along strike and to the north successfully located additional pegmatites and drilling targets. Initial drilling at Morrison will build upon historical drilling to develop the east-west striking pegmatites that dip to the south. The strike extent currently exceeds 500m and mapping suggests the pegmatites could connect west to McCombe and east to Root Bay across approximately 7 km. Historical drilling has shown the pegmatites pinch and swell, duplicate and bifurcate along strike and down dip, so tight geological control will be paramount. The Root exploration area was substantially expanded to the north-east when GT1 picked up an additional 2,991 ha of Greenstone belt (which acts as the local host to LCT pegmatites) in early 2022. Field exploration crews are now planned to move west to east across this tenure over coming months, geologically mapping and prospecting for LCT pegmatites, including utilising the recently acquired portable XRF and Raman Spectrometer for instant elemental and mineralogical analysis. Early this year, GT1 also commissioned a Helimag survey over all its western claims. This has recently been completed and raw data interpretation is underway by Southern Geoscience in Perth. The magnetic survey will be overlayed on known LCT pegmatites in the area, so that fertile signatures can be delineated and exploration targets determined for field verification this season. Ankündigung • Jul 19
Green Technology Metals Limited Baseline Environmental Studies Continue At Seymour Green Technology Metals Limited provided an update on baseline environmental studies at its Seymour Lithium Project in Ontario, Canada. Following the winter thaw, NorthWinds Environmental Services, TBT Engineering and Englobe recently recommenced 2022 baseline environmental monitoring for the Seymour Project. All surveys are designed and managed by environmental subject matter experts, Senior Field Biologists and Indigenous employees and consultants. GT1 is now in its second year of baseline environmental study requirements at Seymour. Up to three years of seasonal baseline surveys can be required to mitigate environmental impact and identify risks to support future project permitting and Environmental Approvals. Baseline surveys are predominantly focussed on fauna, flora, groundwater, surface water and archaeology. All surveys encompass two general scales, Local and Regional, to provide both specific area and larger, regional contexts. Ankündigung • May 28
Green Technology Metals Limited Announces Western Heli-Mag Surveying Commenced Green Technology Metals Limited announced that it is undertaking extensive aerial magnetic data acquisition across most of its western exploration claims in Ontario, Canada. PROSPECTAIR has commenced helicopter magnetic surveying across GT1's Root Lake, Root Bay, Allison Lake, Allison Lake North and Costello Lake projects. A total of 5,286 line-kilometres are expected to be flown over coming weeks, with a traverse line spacing of 50m, and control lines being flown with a 500m spacing. Flight paths have been orientated to maximise the potential of picking up the structural controls for pegmatite emplacement. Magnetic surveys have been instrumental in determining the regional and local structural controls for lithium mineralisation in Ontario. This has typically been a function of the high magnetic response from the greenstone host rock contrasting with the low magnetic response from the pegmatites. The raw data received from PROSPECTAIR is to be sent to Southern Geoscience in Perth for further data processing and target generation mapping. This work is planned to inform field season activities on these projects, which are set to commence shortly. HIGHLIGHTS: Extensive aerial magnetic surveying underway over GT1's western Ontario tenements. Key targeting vector via identification of structural controls for lithium mineralisation. Ankündigung • May 20
Green Technology Metals Limited, Annual General Meeting, Jun 21, 2022 Green Technology Metals Limited, Annual General Meeting, Jun 21, 2022, at 09:00 W. Australia Standard Time. Location: Level 1, 50 Kings Park Road, West Perth WA 6005 West Perth Australia Agenda: To consider and, if thought fit, to pass with or without amendment, as an ordinary resolution the following: that, pursuant to and in accordance with Listing Rule 7.4 and for all other purposes, Shareholders ratify the issue of 30,232,000 Placement Shares issued under Listing Rule 7.1, pursuant to Tranche 1 of the Placement on the terms and conditions in the Explanatory Memorandum; and to consider other matters. Ankündigung • May 19
Green Technology Metals Limited Provides Further Assay Results from the Phase 1 Diamond Drilling Program At its Seymour Lithium Project in Ontario, Canada Green Technology Metals Limited provided further assay results from the Phase 1 diamond drilling program at its Seymour Lithium Project in Ontario, Canada. The Phase 1 drilling program at Seymour was designed to evaluate potential along-strike and down-dip extensions of the North Aubry deposit that were open and untested. The final program consisted of 16 diamond drill holes for a total of 5,826 metres. All but one hole in the Phase 1 program intersected pegmatite along strike and down dip with the single hole barren of pegmatite, GTDD-22-011, on the southeast flank of the deposit, marking the southerly limit of the North Aubry pegmatites. The intercepts returned from solely the upper pegmatite at North Aubry range in thickness up to 42.7m, with the widest intervals located in the northern extensions of the deposit. Assays have now been returned for all 16 of the holes drilled in the Phase 1 program. The key intercepts were: GTDD-22-0001 for 10.5m @ 1.77% Li2O from 123.2m (incl. 7.0m @ 2.11% Li2O); GTDD-22-0013 for 18.2m @ 1.10% Li2O from 304.2m (incl. 3.1m @ 2.05% Li2O); GTDD-22-0014 for 4.5m @ 0.61% Li2O from 250.7m (incl. 2.5m @ 1.01% Li2O); GTDD-22-0002 for 9.0m @ 0.68% Li2O from 174.0m. All results from the Phase 1 program are set to be incorporated into a scheduled update of the current Seymour Mineral Resource estimate (4.8 Mt @ 1.25% Li2O), which remains on track for completion during Second Quarter CY2022. The extensional intercepts evidenced by Phase 1 assays returned to date indicate substantial potential upside to the existing Seymour Mineral Resource estimate. As a result of the Phase 1 northern extensional drilling success at North Aubry, GT1 has commenced further step-out drilling to test the northern and down-dip extension of the pegmatites. Hole GTDD-22-0019, drilled to the southeast of the main pegmatite unit, intercepted minor pegmatite (2.10m). Hole GTDD-22-0320, targeting approximately 75m west of GTDD-22-0019, intercepted 10.70m of pegmatite at 458.2m downhole. While assay results are pending for both holes, the site geologists noted significant spodumene (a high-grade lithium bearing mineral) crystals within the core intercept. This hole extends the known North Aubry pegmatite a further 150m down-dip from the nearest pegmatite intercept, potentially having a significant additional impact on the mineralised pegmatite extents and volume. As previously announced, both Phase 2 (Central Aubry zone) and Phase 3 (Pye prospect) diamond drilling at Seymour are in progress. There is currently no Mineral Resource estimate at either the Central Aubry zone or Pye prospect, with the existing Seymour Mineral Resource estimate comprised solely of the North and South Aubry deposits. At Central Aubry, 7 holes have been completed to date for approximately 1,292 metres. At the Pye prospect (located approximately 1 km east of the Aubry complex), 6 holes have been completed to date for approximately 1,383 metres. All but one of the holes drilled to date at Central Aubry and Pye have now returned assays. No significant lithium intercepts >1.0% Li20 were returned from Central Aubry zone (7 holes) and Pye prospect (6 holes). The initial drilling at Pye has identified LCT type egmatites with geological continuity of over 250m and remains a target for furtherexploration. The results to date at Central Aubry and Pye are set to be combined with other more regional geochemical data, and presented to Dr Nigel Brand, a well-respected geochemist of Geochemical Services Pty Ltd. in Western Australia, who will aid in geochemical fingerprinting to vector in on other fertile pegmatites. Drilling will continue at Pye and Central Aubry once the ground conditions improve sufficiently to allow rig movements. Board Change • Apr 27
No independent directors Following the recent departure of a director, there are no independent directors on the board. The company's board is composed of: No independent directors. 3 non-independent directors. Non-Executive Director Rob Longley was the last director to join the board, commencing their role in 2021. The company's lack of independent directors is a risk according to the Simply Wall St Risk Model. Ankündigung • Apr 12
Green Technology Metals Limited Provides Further Assay Results from the Phase 1 Diamond Drilling Program at its Seymour Lithium Project in Ontario, Canada Green Technology Metals Limited provided further assay results from the Phase 1 diamond drilling program at its Seymour Lithium Project in Ontario, Canada. The Phase 1 drilling program at Seymour was designed to evaluate potential along-strike and down-dip extensions of the North Aubry deposit that were open and untested. This maiden program is complete with 16 holes having been drilled for a total of 5,826 metres. All holes in the Phase 1 program intersected pegmatite along strike and down dip. The intercepts returned from solely the upper pegmatite at North Aubry range in thickness up to 42.7m, with the widest intervals located in the northern extensions of the deposit. Assays have now been returned for 9 of the 16 holes from the Phase 1 program. Results from the first three holes in the program have been previously released, returning key mineralised intervals of 42.7m at 1.54% Li2O (GTDD-21-0004), 8.9m at 1.46% Li2O (GTDD-22-0005) and 1.58m at 1.11% Li2O (GTDD-22-0006). ssay results from the six further holes that were recently received are detailed in Table 1 (along with details of the reviously released intercepts also). The key intercept from each of these six holes was: GTDD-22-0016 for 34.3m @ 1.32% Li2O from 244.0m; GTDD-22-0003 for 19.2m @ 2.20% Li2O from 231.8m (including 9.7m @ 2.95% Li2O); TDD-22-0010 for 10.0m @ 1.89% Li2O from 313.0m (including 5.3m @ 2.85% Li2O); GTDD-22-0015 for 9.0m @ 1.34% Li2O from 238.0m; GTDD-22-0012 for 2.3m @ 1.21% Li2O from 238.0m; and GTDD-22-0009 for 2.0m @ 0.50% Li2O from 291.0m. Results to date from the Phase 1 drilling at North Aubry suggest continuous mineralisation to depth with significant widths and lithium grades. Both the northern and down-dip extents of the pegmatite are open to further expansion. The two final holes drilled in the Phase 1 program, GTDD-22-0001 and GTDD-22-0002 (assays pending for both), are in the northern zone and to the west of GTDD-22-0003. These two holes returned thick, continuous pegmatite intervals of 11.2m and 10.7m, respectively. As a result of this ongoing northern extensional potential at North Aubry, GT1 plans to conduct further step-out drilling in the near term, with planning already underway for this work. All results from the Phase 1 program (including those assays yet to be received) are set to be incorporated into a scheduled update of the current Seymour Mineral Resource estimate (4.8 Mt @ 1.25% Li2O1), which remains on track for completion during second quarter of current year 2022. The extensional intercepts evidenced by Phase 1 assays returned to date indicate substantial potential upside to the existing Seymour Mineral Resource estimate. Ankündigung • Mar 10
Green Technology Metals Limited Provides an Update on Phase 1 Diamond Drilling at Its Seymour Lithium Project in Ontario, Canada Green Technology Metals Limited provided an update on Phase 1 diamond drilling at its Seymour Lithium Project in Ontario, Canada. The Phase 1 program at Seymour is designed to evaluate potential along-strike and down-dip extensions of the North Aubry deposit that are currently open and untested. It is currently approximately 90% progressed (14 of the now expanded 16 planned holes completed) and ahead of schedule. This strong progress places GT1 well on track to complete a scheduled update of the current Seymour Mineral Resource estimate during Second Quarter 2022. As previously announced, due to community spread of the Omicron COVID-19 variant GT1 proactively relocated its staff, offices, accommodation, sampling facilities, fuel and supplies to a discrete location, whilst keeping the drill rigs operational at Seymour. Whilst drilling has been unimpacted, these initiatives have had the effect of elongating lab sample submission and assay receipt timelines. Given this, and the advanced stage of the Phase 1 program, this release details the pegmatite intervals (thicknesses) returned from all holes drilled to date. All completed holes in the Phase 1 program have intersected pegmatite along strike and down dip. The intercepts returned from solely the upper pegmatite at North Aubry range in thickness up to 42.7m, with the widest intervals located in the northern extensions of the deposit. Both the northern and down dip extents of the pegmatite are wide open to further expansion, highlighted by the more recently drilled GTDD-22-0003 intersecting 21.0m to the north and GTDD-22-0013 intersecting 24.5m down dip. Ankündigung • Feb 16
Green Technology Metals Limited Commencement of Central Aubry Drilling Set Green Technology Metals Limited advised that it is continuing to ramp up exploration activities and drilling at the Seymour Lithium Project in Ontario, Canada. Phase 1 drilling approaching completion: North Aubry: Phase 1 drilling at the North Aubry deposit within the Seymour Project is approaching completion, on budget and ahead of schedule. Additional holes have been added to the program taking it from the now-completed eleven holes for 3,837m, to a planned fifteen holes for approximately 5,000m. Assay results are pending for all holes excepting the first one (GTDD-21-0004), which returned 40m at 1.54% Li2O. Residual assay results are expected to be received progressively from late February and through March. GT1 remains on track to complete an updated Mineral Resource estimate for North Aubry during Second Quarter 2022. GT1 is also pleased to advise that its Exploration Permit to continue drilling activities at Seymour has been successfully renewed for a further three years by the Ontario Mines Department. This follows extensive stakeholder engagement by GT1's Thunder Bay based staff, with the application receiving unanimous First Nations support. Phase 2 drilling set to commence: Central Aubry: The next round of drilling at Seymour (Phase 2) is set to test the highly prospective and largely untested, Central Aubry zone. Recently completed aerial magnetic surveying combined with Ground Penetrating Radar (GPR) surveying completed in 2018 provide compelling evidence that mineralized pegmatite extends into the central portion of Aubry, between the currently delineated Mineral Resource estimate at the North and South Aubry lithium deposits. The magnetics and GPR suggest a series of stacked moderately north-easterly dipping structures at Central Aubry, similar to the attitude of the pegmatites within the existing North and South Aubry systems. Ankündigung • Jan 18
Green Technology Metals Limited Announces Maiden Hole At Seymour Project Intersects 40M at 1.54% Li2o Green Technology Metals Limited announced that assay results have been returned for the first drill hole of the Phase 1 diamond drilling at the North Aubry deposit within its Seymour Project in Ontario, Canada. The first hole completed, GTDD-21-0004, was targeting downdip extensions beyond an historical intercept and has returned a thick and continuous intercept of 40m @ 1.54% Li2O (from 244m downhole; see Table 1), confirming GT1's geological modelling and drill targeting. This result represents an excellent start to the Phase 1 drilling program and delivers immediate potential for growth in the existing Seymour Mineral Resource estimate of 4.8 Mt @ 1.25% Li2O. The Phase 1 program at Seymour, consisting of a planned 11 holes for approximately 3,500m, is designed to evaluate potential along-strike and down-dip extensions of the North Aubry deposit that are currently open and untested. The Phase 1 drilling is seeking to aggressively expand the existing Seymour Mineral Resource estimate, with the program expected to be completed during March 2022. Drilling at Seymour has now recommenced for 2022 with the second drill hole of the Phase 1 program in progress. A second diamond drill rig has also arrived onsite and is expected to enter operation in the next week, delivering accelerated dual-cycled drilling progress. Recent Insider Transactions • Nov 12
Non-Executive Director recently bought AU$104k worth of stock On the 3rd of November, Cameron Henry bought around 10m shares on-market at roughly AU$0.01 per share. This was the largest purchase by an insider in the last 3 months. This was the only on-market transaction from insiders over the last 12 months. 
