Announcement • Apr 23
Talisker Resources Ltd. Increases Bralorne Gold Project Diamond Drill Program Talisker Resources Ltd. increased its diamond drill program from 30,000 metres to 105,000 metres. The program will consist of 83,000 metres of resource conversion drilling at the Mustang, Bralorne West and Olympus areas and 22,000 metres of exploration drilling targeting veins at Congress and Pioneer Deeps. Drilling at Mustang (33,000 metres) will focus on extending stopes of the Alhambra, BK and BK9870 veins from the 1030 to the 980 levels, directly below where Talisker is actively mining and developing, as well as along strike to the west. An additional 25,000 metres will be drilled at Bralorne West targeting veins scheduled for mining late 2026, 2027 and 2028. A further 25,000 metres of drilling will be conducted at the Olympus area to support resource conversion for the upcoming mine plan. Talisker will also be initiating drilling at the Congress area, located approximately 15 kilometres to the north of Mustang. A total of 12,000 metres of surface drilling is planned, targeting extensions of known veins along strike and down dip. A further 10,000 metres of exploratory drilling will also be conducted at Pioneer Deeps with a view to delineate a new series of ore bodies first discovered by Talisker drilling in 2021. Drilling will test ore body extensions along strike of the original drilling that reported 1.17 g/t Au over 106.75m. Bralorne Diamond Drill Program Area Drilling (m) Purpose Mustang 33,000 Diamond drilling resource conversion – Alhambra, BK, BK9870 Veins Bralorne West 25,000 Diamond drilling resource conversion – 55, 55HW, 101 Veins Olympus 25,000 Diamond drilling resource conversion and exploration Pioneer Deeps 10,000 Diamond drilling testing bulk tonnage of vein stockworks Congress 12,000 Diamond drilling near three historic gold-antimony mines. Announcement • Apr 21
Talisker Resources Ltd., Annual General Meeting, Jun 18, 2026 Talisker Resources Ltd., Annual General Meeting, Jun 18, 2026. Announcement • Apr 17
Talisker Resources Ltd. Reports Mustang Underground Face Sample Results And Defines High-Grade Shoot On The 1045 Level Talisker Resources Ltd. reported the development on the newly established 1045 Level along the BK Vein at the Mustang Mine where the Company has successfully intersected a continuous 60-metre strike length of high-grade mineralization. The zone comprises a well-defined banded quartz vein averaging 27 grams per tonne (g/t) gold across an average width of 0.85 metres with a total of 384 visible gold occurrences across 17 of the 25 faces channeled on the structure. Ongoing development continues to demonstrate the robustness and expansion potential of the BK Vein system. Additionally, Talisker reported that new development along the BK Vein on the 1060 Level at the Mustang Mine has intersected a high-grade ore shoot, located approximately 15 metres beyond previously developed workings. Key Highlights: 866 g/t over 0.51 m within 254.52 g/t over 2.74 m from BK Vein, West Face No. 11; 413 g/t over 0.38 m within 130.28 g/t over 1.30 m from BK Vein, East Face No. 26; 380 g/t over 0.35 m within 75.44 g/t over 1.88 m from BK Vein, East Face No. 2; 234 g/t over 0.57 m within 102.33 g/t over 1.32 m from BK Vein, East Face No. 28; 142 g/t over 0.40 m within 41.03 g/t over 1.44 m with from BK Vein, East Face No. 4; 89.8 g/t over 0.49 m within 33.62 g/t over 1.43 m from BK Vein, East Face No. 23; 80.3 g/t over 0.47 m within 24.40 g/t over 1.63 m from BK Vein, East Face No. 18; 66.9 g/t over 0.45 m within 19.53 g/t over 1.84 m from BK Vein, East Face No. 5; 32.3 g/t over 0.67 m within 17.65 g/t over 1.33 m from BK Vein, East Face No. 25; 26.9 g/t over 0.88 m within 12.51 g/t over 2.17 m from BK Vein, West Face No. 10; 14.6 g/t over 0.48 m within 6.03 g/t over 1.31 m from BK Vein, West Face No. 9. Bralorne Gold Project Mustang Mine – 1045 & 1060 Lateral Development Assay Results Channel Sample Name From To Interval Au Sample # (m) (m) (m) (g/t) M1045_BK_OD_E1_F2 1.40 2.04 0.64 6.07 X001446 M1045_BK_OD_E1_F2 2.04 2.53 0.49 2.03 X001447 M1045_BK_OD_E1_F2 2.53 2.88 0.35 380.00 X001448 M1045_BK_OD_E1_F2 2.88 3.28 0.40 9.87 X001449 M1045_BK_OD_E1_F4 0.86 1.90 1.04 2.20 X001502 M1045_BK_OD_E1_F4 1.90 2.30 0.40 142.00 X001503 M1045_BK_OD_E1_F5 1.32 2.31 0.99 2.12 X001509 M1045_BK_OD_E1_F5 2.31 2.71 0.40 9.33 X001511 M1045_BK_OD_E1_F5 2.71 3.16 0.45 66.90 X001512 M1045_BK_OD_E1_F18 0.98 1.45 0.47 80.30 X001723 M1045_BK_OD_E1_F18 1.45 1.99 0.54 3.72 X001724 M1045_BK_OD_E1_F18 1.99 2.61 0.62 0.03 X001725 M1045_BK_OD_E1_F23 1.21 1.67 0.46 6.84 X001831 M1045_BK_OD_E1_F23 1.67 2.16 0.49 89.80 X001832 M1045_BK_OD_E1_F23 2.16 2.64 0.48 1.94 X001833 M1045_BK_OD_E1_F25 1.46 2.12 0.66 2.68 X001878 M1045_BK_OD_E1_F25 2.12 2.79 0.67 32.40 X001879 M1045_BK_OD_E1_F26 1.29 2.21 0.92 13.50 X001887 M1045_BK_OD_E1_F26 2.21 2.59 0.38 413.00 X001888 M1045_BK_OD_E1_F28 0.63 1.38 0.75 2.26 X001907 M1045_BK_OD_E1_F28 1.38 1.95 0.57 234.00 X001908 M1060_BK_OD_W1_F9 0.86 1.34 0.48 14.60 X001496 M1060_BK_OD_W1_F9 1.34 2.17 0.83 1.08 X001497 M1060_BK_OD_W1_F10 1.58 2.34 0.76 4.24 X001544 M1060_BK_OD_W1_F10 2.34 3.22 0.88 26.90 X001545 M1060_BK_OD_W1_F10 1.05 1.58 0.53 0.48 X001543 M1060_BK_OD_W1_F11 1.10 1.97 0.87 2.22 X001859 M1060_BK_OD_W1_F11 1.97 2.57 0.60 1.25 X001861 M1060_BK_OD_W1_F11 2.57 2.96 0.39 13.20 X001862 M1060_BK_OD_W1_F11 2.96 3.47 0.51 866.00 X001863 M1060_BK_OD_W1_F11 3.47 3.84 0.37 670.00 X001864 Estimated true widths are between 80% and 100% of interval lengths. Bralorne Gold Project – Channel Collar Locations Table (values rounded to nearest metre) Channel Sample Name UTM Easting UTM Northing Elevation (m) M1045_BK_OD_E1_F2 5625458 513380.6 1048.274 M1045_BK_OD_E1_F4 5625457 513385.4 1048.376 M1045_BK_OD_E1_F5 5625458 513387.9 1048.301 M1045_BK_OD_E1_F18 5625455 513412.7 1048.258 M1045_BK_OD_E1_F23 5625457 513423.3 1048.908 M1045_BK_OD_E1_F25 5625458 513428.2 1048.392 M1045_BK_OD_E1_F26 5625457 513430.2 1048.370 M1045_BK_OD_E1_F28 5625457 513434.7 1048.378 M1060_BK_OD_W1_F9 5625460 513279.7 1063.872 M1060_BK_OD_W1_F10 5625459 513278.2 1063.967 M1060_BK_OD_W1_F11 5625458 513275.5 1064.067 Bralorne Gold Project – Channel Collar Orientations Table Channel Sample Name Azimuth Dip Total Length (o) (o) (m) M1045_BK_OD_E1_F2 178 0 5.93 M1045_BK_OD_E1_F4 184 0 3.12 M1045_BK_OD_E1_F5 178 0 3.16 M1045_BK_OD_E1_F18 176 0 3.70 M1045_BK_OD_E1_F23 170 0 3.19 M1045_BK_OD_E1_F25 182 0 3.33 M1045_BK_OD_E1_F26 184 0 3.35 M1045_BK_OD_E1_F28 177 0 2.97 M1060_BK_OD_W1_F9 314 0 3.54 M1060_BK_OD_W1_F10 318 0 3.22 M1060_BK_OD_W1_F11 339 0 3.84 Channel sampling of underground ore headings at the Bralorne Gold Project is conducted by Geologists using a rock-saw to cut a horizontal 5 cm x 5 cm x 3.0 m groove across the entire face of the drift at a height of 1.2 m off the sill. Individual samples range from 0.35 m to 1.50 m in length and are selected to best represent identified geological structures, sulphide mineralization, or hydrothermal alteration suspected to bracket gold concentrations. Where vein or mineralized zones are wide, consecutive samples are taken across the structure to preserve geological resolution. Lithological breaks are avoided within a single sample wherever possible. Quality assurance and quality control (QAQC) procedures include regular insertion of certified reference materials, blanks, and field duplicates into the sample stream at a rate of approximately 9% of total samples in this release. All preparation and analytical work is performed by Activation Laboratories Ltd. (Actlabs) in Kamloops, British Columbia, Canada. Sample preparation follows Actlabs code RX1, involving crushing the entire sample. 
