Duyuru • 5h
Super Copper Corp Defines 3.5 Km Magnetic Corridor At Cordillera Cobre Project Super Copper Corp. reported results from its 3D magnetic vector inversion of ground magnetic data at the Cordillera Cobre Project, near Copiapó, Chile. The new MVI is the first geophysical evidence linking El Alto and Calcite Hill within a single coherent magnetic corridor. The MVI defines a coherent magnetic corridor extending approximately 3.5 kilometres across the central target area and shows positive spatial correlation with the previously reported chargeability anomaly from induced polarization surveying. Together with historical drill core assay results, these datasets define coherent targets at depth that have not been tested by drilling. MVI modelling has identified a coherent magnetic corridor along a NW–SE structural trend across the El Alto and Calcite Hill target areas, the first geophysical evidence linking these two areas within a single coherent magnetic corridor. The strongest magnetic zones and the strongest chargeability zones overlap at depth, two independent methods detecting the same target. This overlap reduces the likelihood that either anomaly is caused by something other than mineralization. Historical drill holes returned up to 14 m at 0.508% Cu, including 2 m at 1.605% Cu (DVP-01), from the outer margin of the combined geophysical anomalies. The highest-intensity magnetic and chargeability core at depth has not been tested by drilling to date. The Company is finalizing drill targeting using the integrated 3D geophysical model and will announce its plans for the phase 1 diamond drill program in a subsequent news release. While IP surveys target charge and conductive anomalies attributed to the occurrence of metallic sulphide mineralization, magnetic data identifies zones of anomalous magnetic susceptibility naturally occurring in association with abundant ferromagnetic minerals. The combination of these two geophysical responses is typical of IOCG systems within the Atacama region. Magnetic vector inversion models the orientation and strength of subsurface magnetization. Through an MVI model ground magnetic data can be visualized in three dimensions allowing for identification of bodies with magnetic orientations that do not align with the earth's magnetic field. These areas of high magnetization and contrasting orientations to the Earth's field direction can be interpreted as zones of potential ferromagnetic mineralization that exhibit a remnant magnetic response. At El Alto, anomalies interpreted as remnant magnetic responses were identified for the first time allowing to determine zones of interest to target iron oxide bodies expected to be associated with copper. At El Alto, the MVI model shows large zones of strong magnetism that extend from near surface to depths well below historical drilling (~200 m). The strongest magnetic responses form coherent bodies trending northwest-southeast and dipping sub-vertically. These bodies are spatially associated with previously determined chargeability anomalies identified by the Company's IP survey. In the accompanying 3D MVI model, pink and magenta blocks represent the strongest magnetic responses with magnetic orientations that do not align with the earth's field direction. These areas could be attributed to iron oxide occurrence which is closely related to copper mineralization in typical IOCG systems. Blue blocks are background signatures representing rock with no significant magnetic response. The key finding is that the strongest magnetic responses and the strongest chargeability responses have positive correlations at depth. These are two independent geophysical methods measuring two different physical properties, both highlighting the same target area. In IOCG systems, magnetite and copper sulphides are deposited by the same mineralizing fluids, detecting both signatures in the same zone strengthens the possibility that El Alto hosts a copper-bearing system at depth. This association is characteristic of productive IOCG deposits within Chile's Atacama Fault System. The Company has integrated the 3D MVI model with the previously reported 2D IP chargeability inversions and historical drill core assay results to develop a comprehensive exploration model at El Alto. Anomalous zones in the 3D MVI model are closely related spatially with areas of high chargeability identified from previously reported IP surveys. Magnetic data can identify areas of potential iron oxide bearing rocks; while IP chargeability is helpful in targeting sulphides and other metallic minerals that occur in the subsurface. The combination of these two responses is characteristic of iron oxide copper-gold systems in the Atacama region. Both datasets define targets that plunge to the southeast and extend for over one kilometre along a NW–SE structural corridor. The MVI model provides the three-dimensional geometry that the 2D IP sections did not fully resolve. Historical drill core assay results show that copper grades increase with proximity to the combined MVI and IP anomalies. DVP-01 returned 14 m at 0.508% Cu, including 2 m at 1.605% Cu, with the highest grades occurring at the nearest approach to the geophysical anomaly. This relationship provides direct geochemical validation that the geophysical targets are associated with copper mineralization. All historical drill holes terminated at shallow depths (~200 m) and intersected only the upper and peripheral portions of the recently defined geophysical anomalies. The MVI and IP anomalies at depth have never been tested by drilling. The Company is finalizing drill targeting at El Alto using the integrated 3D geophysical model, under the supervision of the Qualified Person, Michael Dufresne, M.Sc., P.Geol., P.Geo., and its geological consultants at APEX Geoscience Ltd. Details of the phase 1 diamond drill program, including hole count, meterage, and target prioritization, will be disclosed in a subsequent news release. Geophysical data collection and processing were conducted by Argali Geofísica (IP and ground magnetics survey) and APEX Geoscience Ltd. (MVI modelling). The IP survey utilized a pole-dipole array configuration with d=50 m, N=1 to 20, and chargeability integration window of 400–1840 ms. The MVI model was generated using Seequent VOXI Earth Modelling. All geophysical data and interpretations have been reviewed by the Qualified Person. Super Copper follows industry standard procedures for the work carried out on the Cordillera Cobre Project, with a quality assurance/quality control (QA/QC) program. For the core samples, blank, duplicates and standard samples were inserted into the sample sequence sent to the laboratory for analysis (~10% of samples). Samples were cut from available core (Half or quarter core) from select intervals containing visible copper mineralization and packed in polyethylene bags with unique sample numbers that were also kept in sample data log. Duyuru • Apr 11
Super Copper Corp Identifies Kilometre-Scale Anomaly Corridor with Multiple Large Chargeability Cores Open At Depth Super Copper Corp. reported the induced polarization survey at the Cordillera Cobre Project near Copiapo, Chile has defined a kilometre-scale potential sulphide corridor characterized by strong, coherent chargeability responses. The responses extend over a minimum 800 metres of strike and approximately 400 metres in vertical extent. Integration of the new geophysical data with newly sampled historical diamond drill core confirms that copper mineralization occurs along the margins of the system, while the highest-intensity chargeability core at depth remains entirely untested. Kilometre-scale copper bearing trend defined at El Alto and coincident with higher chargeability expression at depth in five consecutive IP lines (Lines 2800–3600) spaced 200 metres apart, demonstrating strong lateral continuity over a minimum 800 metres of strike, open along strike and at depth. Consistent high chargeability anomalies at El Alto identified at depth, measuring up to approximately 400 metres in width and 300–400 metres in vertical extent, with increasing chargeability towards the southeast and at depth. Chargeability responses ranging from greater than 0.5 to greater than 5.0 mV/V, consistent with copper-bearing systems in Chile's Atacama belt. Historical diamond drilling confirms copper mineralization at the margins of the IP corridor, validating the geophysical interpretation. Highlight intercepts from newly sampled core include: 14 metres at 0.508% Cu, including 2 metres at 1.605% Cu (DVP-01); 10 metres at 0.324% Cu, including 2 metres at 1.36% Cu (DVP-02); 8 metres at 0.216% Cu, including 1 metre at 1.365% Cu (DVP-03); 4 metres at 0.493% Cu (DVP-06). Historical holes intersected only upper and peripheral portions of the chargeability anomalies, while the highest-intensity chargeability zones at depth remain entirely untested. Integrated IP and ground magnetic data define a structural corridor extending for over one kilometre, providing a clear vector for the Company's planned Second Quarter 2026 diamond drill program targeting the interpreted core of the sulphide system. The IP survey was completed by Argali Geofisica on behalf of Super Copper. This survey included two grids, one at Calcite Hill and one at El Alto, both consisting of five 1 km IP lines at 200 metres spacing. At El Alto a large, coherent chargeability corridor extending over a minimum 800 metres of strike across five consecutive survey lines (Lines 2800–3600) was defined. The corridor comprises multiple high-intensity chargeability centres that appear to coalesce at depth into a broader zone extending towards the southeast. The principal chargeability zones measure up to approximately 200–400 metres in width and extend to depths of at least 300–400 metres below surface, with the strongest responses increasing towards the southeast. Chargeability values range from greater than 0.5 to greater than 5.0 mV/V, typical of IOCG-style and/or porphyry copper systems within the Atacama belt. The corridor remains open along strike and at depth. Ground magnetic data indicates the structural controls extend for over one kilometre, suggesting potential for additional strike continuity beyond the current IP coverage and at depth. Chargeability responses at depth are interpreted to reflect primary sulphide mineralization within bedrock, distinct from near-surface oxide or supergene enrichment horizons. Historical drilling confirms copper mineralization along the margins of the corridor, providing direct validation of the geophysical targets. In 2007, a previous operator completed eight diamond drill holes (DVP-01 through DVP-08) at El Alto, totalling approximately 1,555 metres. The program was designed to test near-surface targets and was not guided by IP data, which had not yet been acquired. All eight holes terminated at relatively shallow depths, reaching a maximum of approximately 200 metres downhole. At El Alto, the Company re-logged select intervals of previously unsampled historical diamond drill core from six drill holes (DVP-02, DVP-03, DVP-05, DVP-06 and DVP-07) originally drilled in 2007 and sampled them for assay. Additionally, the Company resampled drill holes DVP-01 and DVP-08 for drill hole verification and up-to-date analytical procedures. New Risk • Mar 23
New major risk - Share price stability The company's share price has been highly volatile over the past 3 months. It is more volatile than 90% of Canadian stocks, typically moving 19% a week. This is considered a major risk. Share price volatility increases the risk of potential losses in the short-term as the stock tends to have larger drops in price more frequently than other stocks. It may also indicate the stock is highly sensitive to market conditions or economic conditions rather than being sensitive to its own business performance, which may also be inconsistent. Currently, the following risks have been identified for the company: Major Risks No financial data reported. Share price has been highly volatile over the past 3 months (19% average weekly change). Shareholders have been substantially diluted in the past year (66% increase in shares outstanding). Minor Risk Market cap is less than US$100m (CA$28.5m market cap, or US$20.7m). Duyuru • Mar 20
Super Copper Corp Discovers New High-Grade Copper Zones At Cordillera Cobre Project SUPER COPPER CORP. reported Phase 1 exploration results from its flagship Cordillera Cobre Project, located in Chile's Atacama region. Cordillera Cobre is one of two copper exploration assets held by the Company in the Atacama belt, alongside the Castilla Project, which Super Copper acquired in 2025 and is advancing through early-stage exploration. Phase 1 represents its most significant field program to date: two new high-grade copper zones discovered in a completely undrilled area, with excellent surface grades confirmed across three distinct target areas, and structural controls on mineralization mapped across 800+ hectares via ground magnetometry. The IP survey is now complete, with chargeability data being processed for near term release. Highlights Two new high-grade copper zones discovered in the northern project area, returning up to 7.13% Cu and 4.78% Cu from rock grab samples of outcrop, in an area with no prior drill testing 24 of 102 rock grab samples exceeded 1% copper, with 10 samples returning greater than 3% Cu, demonstrating widespread high-grade mineralization across multiple target areas Excellent surface grades confirmed at three distinct target areas: Northern Showing: 7.13% Cu with 98.7 g/t Ag (new discovery) Anima Mine Trend: 6.92% Cu over 1 m in chip samples Calcite Hill: 3.40% Cu over 1 m in chip samples El Alto Historical Trench T-267A returned 17 m grading 0.34% Cu, including 2 m at 1.48% Cu in chip samples, demonstrating continuity and width potential, and potentially indicative of a structurally controlled system at depth An IP survey is now complete across El Alto and Calcite Hill target areas; chargeability results to be released imminently Super Copper's Phase 1 results at Cordillera Cobre include samples grading up to 7.13% Cu across multiple target areas, well above typical mine grades in the region. The combination of high-grade copper exposed at surface, multiple mineralized zones, and structural controls now defined by geophysics de-risks the path to targets and provides a technical foundation for high-confidence drill target selection. These combined results indicate the potential for a larger, structurally controlled copper system rather than isolated high-grade occurrences. New High-Grade Results in the North: Phase 1 prospecting identified two previously unknown high-grade copper zones in the northern portion of Cordillera Cobre, an area not covered by historical drilling. The newly designated Northern Showing returned 7.13% Cu with 98.7 g/t Ag and 4.78% Cu in rock grab samples from outcrop. Mineralization is hosted in breccias and veins within diorite (northernmost cluster) and volcaniclastic rocks, and appears structurally controlled, with the two zones located approximately 1.5 kilometres apart. The 1.5-kilometre separation between the two zones, combined with consistent structural orientation, suggests these are not isolated occurrences but surface expressions of a broader mineralized system, one that has received no drill testing to date. The Northern Showing is now a priority target for follow-up work alongside El Alto and Calcite Hill. Ground magnetometry across 800+ hectares reveals a coherent set of northwest-trending structural corridors controlling mineralization at both Calcite Hill and El Alto. Magnetic low anomalies, reflecting magnetite destruction by hydrothermal fluids, a hallmark of Atacama copper systems, are spatially coincident with the project's highest-grade surface samples. The magnetometry data has now been integrated with an Induced Polarization (IP) survey across both the El Alto and Calcite Hill target areas. IP chargeability results will be released in a subsequent announcement. While magnetics define where the hydrothermal system was active, IP chargeability pinpoints potential disseminated sulphide concentrations at depth, which will help convert structural targets into high-confidence drillable targets. The full dataset will advance the Company toward its Phase 1 drill program, targeted for Second Quarter 2026. The Phase 1 campaign marks the Company's most comprehensive field program to date at Cordillera Cobre, designed to validate historical drill results and generate new data across multiple high-priority copper zones to support drill target definition.All rock samples were submitted to ALS Laboratories in Chile for geochemical analysis. The geophysical survey was carried out by Argali Geophysics. These results form the foundation for Super Copper's next phase of target definition, with Phase 1 drilling targeted for Second Quarter 2026. New Risk • Mar 09
New major risk - Shareholder dilution The company's shareholders have been substantially diluted in the past year. Increase in shares outstanding: 71% This is considered a major risk. Shareholder dilution occurs when there is an increase in the number of shares on issue that is not proportionally distributed between all shareholders. Often due to the company raising equity capital or some options being converted into stock. All else being equal, if there are more shares outstanding then each existing share will be entitled to a lower proportion of the company's total earnings, thus reducing earnings per share (EPS). While dilution might not always result in lower EPS (like if the company is using the capital to fund an EPS accretive acquisition) in a lot cases it does, along with lower dividends per share and less voting power at shareholder meetings. Currently, the following risks have been identified for the company: Major Risks No financial data reported. Shareholders have been substantially diluted in the past year (71% increase in shares outstanding). Minor Risks Share price has been volatile over the past 3 months (18% average weekly change). Market cap is less than US$100m (CA$33.8m market cap, or US$24.9m). Duyuru • Mar 07
Super Copper Corp. announced that it has received CAD 9.750001 million in funding On March 6, 2026, Super Copper Corp closed the transaction. The company issued 13,000,000 units at a price of CAD 0.75 per unit for aggregate gross proceeds of CAD 9,750,000. Each Unit is comprised of one common share in the capital of the Company and one Share purchase warrant. 6,566,666 of the Units issued were comprised of Series A Warrants and 6,433,334 of the Units issued were comprised of Series B Warrants. Each Series A Warrant entitles the holder to acquire one additional Share at a price of CAD 1.15 per Share for a period of 36 months following the closing of the Offering. Each Series B Warrant entitles the holder to acquire one additional Share at a price of CAD 1.15 per Share from the date that is 61 days from the closing of the Offering until the date that is 36 months from the closing of the Offering. In connection with the Offering, the Agents received a cash commission equal to 6.0% of the gross proceeds of the Offering and the Company issued to the Agents non-transferable warrants ("Broker Warrants") representing 6.0% of the aggregate number of Units sold pursuant to the Offering. Each Broker Warrant entitles the holder to purchase one Share of the Company at a price of CAD 1.15 per Share for a period of 36 months from the closing of the Offering. Securities issued to the Agents in connection with the Offering were subject to a hold period under applicable Canadian securities laws expiring four months and one day from the closing date of the Offering. Duyuru • Feb 27
Super Copper Corp. announced that it expects to receive CAD 2 million in funding Super Copper Corp. announced a brokered private placement of up to 2,666,666 units at a price of CAD 0.75 per Unit for gross proceeds of CAD 1,999,999.5 on February 26, 2026. The Offering will be conducted on a "best efforts" basis. Each Unit will consist of one common share in the capital of the Company and one Share purchase warrant. Each Warrant will entitle the holder to acquire one additional Share at a price of CAD 1.15 for a period of 36 months from the closing of the Offering. In connection with the Offering, the Agents will receive a cash commission equal to 6.0% of the gross proceeds of the Offering and the Company will issue to the Agents non-transferable warrants representing 6.0% of the aggregate number of Units sold pursuant to the Offering. Each Broker Warrant will entitle the holder to purchase one Share of the Company at a price of CAD 1.15 for a period of 36 months from the closing of the Offering. The Offering is expected to close on or about March 5, 2026, or such other date that is within 45 days from the date of the release, as the Company and the Agents may determine. The Offering remains subject to certain conditions, including, but not limited to, the receipt of all necessary approvals, and compliance with the policies of the Canadian Securities Exchange ("CSE"). The Units will be offered by way of the listed issuer financing exemption under Part 5A of National Instrument 45-106 – Prospectus Exemptions ("NI 45-106"), as amended by Coordinated Blanket Order 45-935 – Exemptions from Certain Conditions of the Listed Issuer Financing Exemption (the "Order"), in the provinces of Alberta, British Columbia and Ontario. the Units issued to Canadian residents under the Offering will not be subject to resale restrictions. The Units may also be offered to persons in the United States pursuant to Rule 506(b) of Regulation D under the United States Securities Act of 1933, as amended (the "U.S. Securities Act") and similar exemptions under applicable U.S. state securities laws, as well as in offshore jurisdictions as agreed upon by the Company and the Agents pursuant to relevant prospectus or registration exemptions under any domestic securities laws and may have resale restrictions in accordance with applicable laws. New Risk • Feb 16
New major risk - Shareholder dilution The company's shareholders have been substantially diluted in the past year. Increase in shares outstanding: 32% This is considered a major risk. Shareholder dilution occurs when there is an increase in the number of shares on issue that is not proportionally distributed between all shareholders. Often due to the company raising equity capital or some options being converted into stock. All else being equal, if there are more shares outstanding then each existing share will be entitled to a lower proportion of the company's total earnings, thus reducing earnings per share (EPS). While dilution might not always result in lower EPS (like if the company is using the capital to fund an EPS accretive acquisition) in a lot cases it does, along with lower dividends per share and less voting power at shareholder meetings. Currently, the following risks have been identified for the company: Major Risks No financial data reported. Shareholders have been substantially diluted in the past year (32% increase in shares outstanding). Minor Risks Share price has been volatile over the past 3 months (18% average weekly change). Market cap is less than US$100m (CA$38.7m market cap, or US$28.4m). Duyuru • Jan 28
Super Copper Corp. Provides A Geological Interpretation of Results from its Phase 1 Surface Sampling and Mapping Program At the 100%-Owned Castilla Copper-Gold Project, Located in Chile's Atacama Region Super Copper Corp. provided a geological interpretation of results from its Phase 1 surface sampling and mapping program at the 100%-owned Castilla Copper-Gold Project, located in Chile's Atacama Region. The results support the interpretation that Castilla hosts structurally controlled Iron Oxide Copper-Gold ("IOCG") mineralization, characterized by extensive strike continuity, high-grade copper and gold mineralization, and a well-developed iron oxide core, consistent with many Chilean copper-gold deposits. Exploration Highlights: Prospective IOCG System: Geological mapping and mineral assemblages are consistent with an Iron Oxide Copper-Gold system, a deposit type associated with some of the world's largest copper-gold mines. Extensive Strike Continuity: Individual mineralized vein systems and mine workings have been mapped with strike lengths of up to 500 metres within Castilla and up to 700 metres length reported within the district, remaining open along strike and under shallow cover. Vertical Continuity Demonstrated: Historical underground workings confirm mineralization to depths of at least 50 metres, with no modern drilling conducted to test depth extensions. High-Grade Surface Results: Select samples returned values up to 53.8 g/t gold, 17.7% copper, and >50% iron, highlighting the presence of high-grade mineralized zones. Strategic Structural Setting: The project is situated within the Atacama Fault System, a primary structural corridor controlling major copper-gold mineralization in northern Chile. Phase 1 work indicates that mineralization at Castilla is hosted within Cretaceous-age plutonic rocks, ranging from quartz diorite to tonalite, within a belt of Upper Triassic to Lower Cretaceous intrusive units. Mineralization is interpreted to occur in two overlapping and genetically related styles, consistent with IOCG system development: High-Grade Gold & Copper Quartz Veins: Gold- and copper-bearing quartz and quartz-carbonate veins occur as a dense vein swarm trending predominantly north-northeast, north-south, and northwest, dipping sub-vertically. Vein Dimensions: Individual veins range from 0.5 to 3.0 metres in width, with mapped strike lengths from 20 metres up to 500 metres. Mineralogy: Gold bearing veins are composed of quartz with variable concentrations of pyrite, chalcopyrite, chalcocite, covellite, with secondary copper minerals including malachite and chrysocolla. Alteration & Textures: Boxwork textures and oxidation products indicate a well-developed near-surface oxidation zone, commonly associated with higher-grade sulphide mineralization at depth. Historical Validation:Artisanal mining historically targeted these structures selectively, with workings estimated to extend to at least 50 metres depth. Massive Iron Oxide (Fe) Core: A series of massive iron oxide veins occur in the central portion of the Castilla Project and are interpreted as the core of the IOCG system. System Significance: In IOCG models, these iron-rich bodies often represent the structural and chemical focus for later-stage copper and gold mineralization. New Risk • Jan 27
New minor risk - Share price stability The company's share price has been volatile over the past 3 months. It is more volatile than 75% of Canadian stocks, typically moving 16% a week. This is considered a minor risk. Share price volatility indicates the stock is highly sensitive to market conditions or economic conditions rather than being sensitive to its own business performance, which may also be inconsistent. It also increases the risk of potential losses in the short term as the stock tends to have larger drops in price more frequently than other stocks. Currently, the following risks have been identified for the company: Major Risk No financial data reported. Minor Risks Share price has been volatile over the past 3 months (16% average weekly change). Shareholders have been diluted in the past year (19% increase in shares outstanding). Market cap is less than US$100m (CA$31.9m market cap, or US$23.5m). Duyuru • Jan 15
Super Copper Announces Bonanza-Grade Gold Discovery At Castilla Super Copper announced a high-grade discovery from rock grab samples following the completion of its Phase 1 surface sampling program at the 100%-owned Castilla Copper-Gold Project, located in the prolific Atacama Region of Chile. The sampling program, which is comprised of mostly selective rock grab samples and floats, has identified a high-grade, multi-commodity mineral system characterized by bonanza-grade gold (Au), exceptionally high copper (Cu) and iron (Fe) values, supporting the presence of a large and robust mineralizing system. Although the sampling was mostly selective rock grab and float samples, and by nature represent a unbiased high population, the presence of a robust mineralization system is supported by the fact that there are numerous samples from numerous locations that have yielded greater than 1 gram per tonne (g/t) Au and 1% Cu along with significant alteration and pathfinder elements. Duyuru • Nov 09
Super Copper Corp. Completes Phase 1 Exploration Program At its Cordillera Cobre Project in Atacama, Chile Super Copper Corp. announced the successful completion of its phase 1 exploration program at its Cordillera Cobre Project, located in Chile's Atacama copper belt, approximately 40 kilometres north of the mining hub of Copiapo. The 2025 field program was designed to build upon historical work and accelerate Super Copper's understanding of the project's potential. Fieldwork included drill core verification, systematic surface and underground sampling, and a pair of modern ground geophysical surveys aimed at mapping subsurface structures and potential chargeability anomalies across priority targets. The 2025 phase 1 campaign marks the Company's most comprehensive field program to date at Cordillera, designed to validate historical drill results and generate new data across multiple high-priority copper zones with the intent to identify and design drill targets. Program Highlights: Drill Core Sampling Verification: Historical diamond drill holes completed in 2008 at the El Alto target were reviewed, relogged, and sampled to verify mineralized zones and test for additional extensions. Of the 1,500 metres of historical drilling, all available core was relogged and approximately 354 metres (25%) of core were sampled under rigorous QA/QC protocols consistent with international standards. Surface and Underground Sampling: A total of 102 rock samples were collected from outcrops, trenches, and historical mine workings across three strategic zones, including El Alto, Calcite Hill, and additional prospects in the northern corridor. Ground Geophysical Surveys: Ground Magnetometry was completed over more than 800 hectares, covering the Calcite Hill and El Alto target areas to define structural trends and potential mineralized corridors. Induced Polarization (IP) surveys totaled 10 line-kilometres, with five lines each over Calcite Hill and El Palo, spaced approximately 200 metres apart, designed to map disseminated sulphide mineralization and deeper conductive targets. All core and rock samples have been submitted to ALS Laboratories in Chile for geochemical analysis. The geophysical datasets are being processed and interpreted, with results expected in the coming weeks. Duyuru • Oct 13
Super Copper Corp. Announces Up to 5.0 G/T Gold Mineralization At the Castilla Project Super Copper Corp. announced the identification of gold mineralization within at least two generations of quartz+carbonate veins and the copper-bearing iron oxide system at its Castilla Project in northern Chile. Initial rock sampling from historical workings and outcrops in late 2023 returned up to 5.0 grams per tonne (g/t) gold and 5.5% copper, confirming that gold is spatially associated with quartz-carbonate veins and with copper mineralization in quartz-magnetite vein systems hosted by altered diorite intrusives. The Castilla Project, encompassing approximately 7,200 hectares across 25 exploration concessions, hosts a series of magnetite-bearing veins and quartz+carbonate veins containing copper oxides, iron oxides, and minor sulphides. Fieldwork has confirmed multiple zones of surface oxidation, magnetite veining, and visible copper mineralization associated with structural corridors trending nearly north-south and northwest. A total of 93 rock samples have been collected to date from a number of priority targets zones for assay and geochemistry, with results expected in the coming weeks. Super Copper's ongoing work program includes detailed mapping, surface sampling, and ground magnetic surveys designed to integrate geological and geophysical data into a Phase I drill targeting model. Quality Assurance and Control Samples were analyzed at ALS Global Laboratories (Geochemistry Division) in Santiago, Chile (an ISO/IEC 17025:2017 accredited facility). Duplicates, blanks and standard reference materials (SRMs) are inserted where required and deemed appropriate. A secure chain of custody is maintained in transporting and storing of all samples. Gold was assayed using a fire assay with atomic emission spectrometry and gravimetric finish when required (+10 g/t Au). Rock chip samples from outcrop/bedrock are selective by nature and may not be representative of the mineralization hosted on the project. New Risk • Aug 14
New major risk - Market cap size The company's market capitalization is less than US$10m. Market cap: CA$13.5m (US$9.78m) This is considered a major risk. Companies with a small market capitalization are most likely businesses that have not yet released a product to market or are simply a very small company without a wide reach. Either way, risk is elevated with these companies because there is a chance the product may not come to fruition or the company's addressable market or demand may not be as large as expected. In addition, if the company's size is the main factor, it is less likely to have many investors and analysts following it and scrutinizing its performance and outlook. Currently, the following risks have been identified for the company: Major Risks No financial data reported. Market cap is less than US$10m (CA$13.5m market cap, or US$9.78m). Duyuru • Jun 19
Super Copper Corp. Announces Appointment of Sebastian Wagner to Board of Directors Super Copper Corp. announced the appointment of Sebastian Wagner to its board of directors. Mr. Wagner is a strategic and entrepreneurial leader with over 15 years of experience in the energy, commodities trading, and investment sectors across Africa and international markets. He serves as Natural Resources Lead at Apeiron Investment Group ("Apeiron"), a discretionary investment firm founded by serial entrepreneur Christian Angermayer. With teams across New York, London, Berlin, Abu Dhabi, and Malta, Apeiron applies a global multi-strategy investment approach, with a primary focus on the US. Apeiron's efforts span direct investments in innovative companies, as well as anchor LP investments combined with minority GP stakes in emerging asset managers. Asset managers Apeiron has stakes in currently manage approximately $5 billion in external capital. In his role, Mr. Wagner spearheads the development of the natural resources portfolio, with a strong emphasis on African markets. Mr. Wagner is the board nominee as appointed by Apeiron pursuant to the investor rights agreement entered into by the Company and Apeiron on May 29, 2025, in connection with Apeiron's investment in the Company, as further detailed in the Company's news release dated May 30, 2025. Duyuru • Jun 16
Super Copper Corp., Annual General Meeting, Jul 31, 2025 Super Copper Corp., Annual General Meeting, Jul 31, 2025. Duyuru • Jun 11
Super Copper Corp. Announces Phase 2 Exploration Program At Cordillera Cobre Project Super Copper Corp. announced its Phase 2 exploration program at the Cordillera Cobre Project, located in Chile's Coastal IOCG belt. This next phase of work follows the success of the Company's initial property-wide surface program, which confirmed widespread, high-grade copper mineralization at surface. Notably, 46 rock grab samples returned assays above 1% copper (Cu), including 11 samples exceeding 5% Cu, with a peak result of 10.3% Cu. Phase 2 is designed to advance the Company's understanding of its highest-priority copper targets and establish a data-driven foundation for an inaugural drill program. The program includes detailed ground geophysical surveys, sampling of historical core, and systematic channel sampling across key mineralized zones. The Company has identified the primary target areas of the Cordillera Cobre project for the Phase 2 work: El Alto. Calcite Hill. These areas returned consistent high-grade copper values and feature visible oxide mineralization, including malachite, tenorite, chalcocite, and bornite, with potential for sulfide mineralization at depth. Core Sampling & Verification. Systematic sampling of unsampled historical core from El Alto to confirm past observations and guide future drilling. Channel Sampling & Prospecting. Focused work at Mina Anima, Calcite Hill outcrops and mine workings, and new targets in the northwest area of the property. Phase 3 and Additional Exploration. Upon completion of Phase 2 and subject to the Company obtaining additional financing, the Company aims to launch a Phase 3 program focused on drilling high-priority targets identified through the current work provided Phase 2 results warrant further exploration. The northwest portion of the property remains underexplored and will be further assessed for future expansion potential.eline. Super Copper is working closely with its geological team, consultants, technology providers, and execution partners to finalize Phase 2 scheduling. An update will be issued once the program is complete, with results expected in the second half of 2025. Duyuru • May 31
Super Copper Corp. announced that it has received CAD 1 million in funding from Apeiron Investment Group Limited On May 30, 2025, Super Copper Corp. closed the transaction. Each warrant entitles the holder to acquire an additional common share at a price of CAD 0.30 per common share until May 29, 2028. The securities are subject to a four month hold period, expiring on September 30, 2025 in accordance with applicable Canadian securities laws. Prior to the completion of the offering, Apeiron Investment Group Limited, did not hold any securities of the company. Following the completion of the offering, Apeiron holds 4,000,000 common shares, 4,000,000 warrants, and 3,000,000 RSUs, representing approximately 10.99% of the company's issued and outstanding common shares, on an undiluted basis, or approximately 25.35% of the company's issued and outstanding common shares, on a partially diluted basis, subject, however, to Apeiron being precluded from exercising warrants or converting RSUs that would result in Apeiron holding more than 19.9% of the then issued and outstanding common shares of the company. Duyuru • May 22
Super Copper Corp. announced that it expects to receive CAD 1 million in funding from Apeiron Investment Group Limited Super Copper Corp announced a non-brokered private placement to issue 4,000,000 units of the company at a price of CAD 0.25 per Unit for aggregate gross proceeds of CAD 1,000,000 on May 22, 2025. Each Unit will be comprised of one Common Share and one warrant to purchase and additional common share at CAD 0.6 for a 36 month period. The securities issued in the transaction will be subject to a hold period of 4 months. The Transaction is expected to close on or about May 29, 2025 and will include participation from Apeiron Investment Group Limited will hold approximately 10.99% of the issued and outstanding common shares. New Risk • Feb 21
New major risk - Market cap size The company's market capitalization is less than US$10m. Market cap: CA$13.9m (US$9.76m) This is considered a major risk. Companies with a small market capitalization are most likely businesses that have not yet released a product to market or are simply a very small company without a wide reach. Either way, risk is elevated with these companies because there is a chance the product may not come to fruition or the company's addressable market or demand may not be as large as expected. In addition, if the company's size is the main factor, it is less likely to have many investors and analysts following it and scrutinizing its performance and outlook. Currently, the following risks have been identified for the company: Major Risks No financial data reported. Market cap is less than US$10m (CA$13.9m market cap, or US$9.76m). Minor Risk Share price has been volatile over the past 3 months (16% average weekly change). Duyuru • Jan 17
Super Copper Corp. announced that it has received CAD 0.413 million in funding On January 16, 2025 Super Copper Corp. closed the transaction and issued 556,722 units at issue price of CAD 0.23 per unit for proceeds of CAD 128,046.06 in its second and final tranche. Each Unit consists of one common share of the Company and one common share purchase warrant. Each Warrant entitles the holder to purchase one additional common share of the Company at a price of CAD 0.30 per share until January 15, 2027, subject to acceleration. The Company paid cash finder's fees of CAD 5,593.60 to arm's length finders in connection with the second tranche of the Offering. All securities issued in the second tranche of the Offering are subject to a four month hold period, expiring on May 16, 2025, under applicable securities laws in Canada. The company raised CAD 413,000 between both tranches. Duyuru • Jan 16
Super Copper Corp. announced that it has received CAD 0.413 million in funding On January 16, 2025 Super Copper Corp. closed the transaction and issued 556,722 units at issue price of CAD 0.23 per unit for proceeds of CAD 128,046.06 in its second and final tranche. Each Unit consists of one common share of the Company and one common share purchase warrant. Each Warrant entitles the holder to purchase one additional common share of the Company at a price of CAD 0.30 per share until January 15, 2027, subject to acceleration. The Company paid cash finder's fees of CAD 5,593.60 to arm's length finders in connection with the second tranche of the Offering. All securities issued in the second tranche of the Offering are subject to a four month hold period, expiring on May 16, 2025, under applicable securities laws in Canada. Duyuru • Dec 13
Super Copper Corp. Announces Results of Stage 1 Field Program with Advanced Exploration Work Super Copper Corp. announced the completion of its Stage 1 field exploration program at the Company's project in Chile. This milestone marks the culmination of focused exploration efforts designed to identify high-priority targets and pave the way for further advancement of the property. Building on the successful launch of the program in November 2024, the Stage 1 work program achieved the following key objectives: Highlights of Stage 1 Program: Sample Collection: Over 100 surface samples were collected across targeted zones to analyze mineralization potential, which have been sent to a laboratory for geochemical analysis; Integration of Hyperspectral Data: Results of WorldView-3 hyperspectral data covering 79 square kilometers identified exploration areas with significant mineral alteration patterns, such as sericite, kaolinite, calcite, and hematite, that one or more could be indicative of potential copper mineralization and warrant follow-up exploration; Geophysical Flyovers: High-resolution aerial surveys captured key geophysical data to refine structural and lithological interpretations; and Detailed Mapping and Analysis: Comprehensive geological mapping provided insight into the structural features, rock types, and alteration zones across the property. All collected samples have been sent to a certified laboratory for geochemical analysis. Sample geochemical results are expected to be published in the coming months, with findings to be released upon completion of detailed reviews. Next Steps: The results from Stage 1 will guide the Company's plans for the next steps of exploration in 2025, including identifying potential drill targets in high-priority zones. The integration of hyperspectral data and geochemical results will enhance precision in identifying potential copper mineralization across the project area. Duyuru • Nov 26
Super Copper Corp. Announces Appointment of Peter Jonathan Murphy to Advisory Board Super Copper Corp. announced the appointment of Peter Jonathan (PJ) Murphy to its Advisory Board. PJ Murphy is a seasoned mining executive and investor with over 25 years of management experience in the mining sector and broader equity markets. Currently serving as the Chairman of Forge Resources, he has a proven track record of identifying and advancing successful mining projects. Murphy brings exceptional leadership skills and a vast network within the investment and mining industries to Super Copper. His expertise in recognizing value investments and maximizing their potential has led to multiple successful transactions in his endeavors. He holds a Bachelor of Science degree from McGill University and a Doctor of Dental Surgery degree from Dalhousie University. Duyuru • Nov 08
Super Copper Corp. Initiates Field Exploration Program in Chile SUPER COPPER CORP. announced the initiation of its initial field exploration program at the Company's project in Chile. Developed by the Company's lead consulting geologist and QP Mr. Michael Dufresne, P.Geo. and the extended geology team at APEX Geoscience Ltd. (APEX), The program is designed to target high-priority zones for copper and precious metal mineralization through detailed mapping, sampling, and analysis, enhanced by newly acquired hyperspectral data. The Company has acquired WorldView-3 (WV3) hyperspectral data, covering approximately 79 square kilometers of the project area, which provides high-resolution imagery that can assess up to 12 distinct alteration minerals. This data will allow the Company to strategically refine exploration targets by identifying specific mineral signatures, including sericite, kaolinite, calcite, and hematite. Such mineral zoning is invaluable in delineating zones of hydrothermal alteration commonly associated with copper deposits and will help prioritize fieldwork leading to drill targeting for optimal efficiency and impact. The field program, scheduled to commence in the third week of November, will be executed by a skilled team of professional geologists from APEX, with logistical support from additional local experienced personnel. Key Highlights of the Field Program: High-Tech Targeting with Hyperspectral Data: Leveraging hyperspectral data to refine exploration zones and identify alteration mineral patterns indicative of potential copper mineralization. Comprehensive Geological Mapping and Sampling: To define structural features, rock types, and mineralized zones across the property. This will be complemented by systematic rock and soil sampling to obtain representative mineral samples from key areas. Each sample will undergo detailed geochemical analysis to identify copper and other mineral concentrations, allowing for accurate, data-driven interpretation of mineralization patterns. Path to Drill Target Identification: This program is focused on uncovering high-confidence prospective drill targets. The integration of hyperspectral data and systematic sampling aims to refine the property's mineral potential and establish key zones for potential follow-up drilling in 2025. Experienced Exploration Leadership: Led by Senior Geologist and QP Mr. Alfonso Rodriguez, P.Geo. and a seasoned team from APEX, the program benefits from expert oversight, local experience, and technical precision, reinforcing Super Copper's commitment to a successful outcome. Value-Creating Exploration Strategy: This program combines advanced technology with proven exploration techniques, optimizing both efficiency and impact, aligning with Super Copper's objective of creating long-term value for shareholders. The Company anticipates that initial interpretations of the hyperspectral data will be completed within the next 2 weeks. This information will be integrated into the field program, enhancing target accuracy for the on-ground exploration team. The Company looks forward to providing further updates on the field program and preliminary findings in due course.