Declared Dividend • May 28
Dividend of kr2.00 announced Shareholders will receive a dividend of kr2.00. Ex-date: 13th November 2026 Payment date: 19th November 2026 Dividend yield will be 2.8%, which is higher than the industry average of 2.7%. Sustainability & Growth Dividend is not adequately covered by earnings (96% earnings payout ratio). However, it is covered by cash flows (75% cash payout ratio). The dividend has decreased over the past 10 years, indicating a lack of growth and stability in payments. The company's earnings per share (EPS) would need to grow by 6.2% to bring the payout ratio under control. EPS is expected to grow by 104% over the next 3 years, which is sufficient to bring the dividend into a sustainable range. Upcoming Dividend • May 13
Upcoming dividend of kr1.00 per share Eligible shareholders must have bought the stock before 20 May 2026. Payment date: 26 May 2026. Payout ratio is on the higher end at 96%, however this is supported by cash flows. Trailing yield: 2.9%. Lower than top quartile of British dividend payers (5.6%). Higher than average of industry peers (2.2%). Reported Earnings • May 05
First quarter 2026 earnings released: EPS: kr0.72 (vs kr1.08 in 1Q 2025) First quarter 2026 results: EPS: kr0.72 (down from kr1.08 in 1Q 2025). Revenue: kr25.0m (down 7.7% from 1Q 2025). Net income: kr5.10m (down 33% from 1Q 2025). Profit margin: 20% (down from 28% in 1Q 2025). The decrease in margin was primarily driven by lower revenue. Revenue is forecast to grow 11% p.a. on average during the next 3 years, compared to a 4.4% growth forecast for the Machinery industry in the United Kingdom. Over the last 3 years on average, earnings per share has fallen by 10% per year but the company’s share price has only fallen by 2% per year, which means it has not declined as severely as earnings. Declared Dividend • Apr 22
Final dividend of kr1.00 announced Shareholders will receive a dividend of kr1.00. Ex-date: 20th May 2026 Payment date: 26th May 2026 Dividend yield will be 4.7%, which is higher than the industry average of 2.7%. Sustainability & Growth Dividend is covered by both earnings (86% earnings payout ratio) and cash flows (61% cash payout ratio). The dividend has decreased over the past 10 years, indicating a lack of growth and stability in payments. EPS is expected to grow by 86% over the next 3 years, which should provide support to the dividend and adequate earnings cover. Recent Insider Transactions • Mar 10
Finance Director recently bought kr221k worth of stock On the 5th of March, Daphner Uhmeier bought around 3k shares on-market at roughly kr88.50 per share. This transaction amounted to 16% of their direct individual holding at the time of the trade. This was the largest purchase by an insider in the last 3 months. This was Daphner's only on-market trade for the last 12 months. Recent Insider Transactions • Mar 01
CEO, President recently sold kr123k worth of stock On the 26th of February, Steve Dawson sold around 1k shares on-market at roughly kr88.01 per share. This transaction amounted to 2.9% of their direct individual holding at the time of the trade. This was the largest sale by an insider in the last 3 months. This was Steve's only on-market trade for the last 12 months. Reported Earnings • Feb 21
Full year 2025 earnings released: EPS: kr3.49 (vs kr4.85 in FY 2024) Full year 2025 results: EPS: kr3.49 (down from kr4.85 in FY 2024). Revenue: kr108.0m (down 20% from FY 2024). Net income: kr24.6m (down 28% from FY 2024). Profit margin: 23% (down from 25% in FY 2024). The decrease in margin was driven by lower revenue. Revenue is forecast to grow 9.5% p.a. on average during the next 3 years, compared to a 4.8% growth forecast for the Machinery industry in the United Kingdom. Over the last 3 years on average, earnings per share has fallen by 4% per year whereas the company’s share price has fallen by 7% per year. Declared Dividend • Feb 19
Dividend of kr1.00 announced Shareholders will receive a dividend of kr1.00. Ex-date: 20th May 2026 Payment date: 26th May 2026 Dividend yield will be 4.9%, which is higher than the industry average of 2.7%. Sustainability & Growth Dividend is not covered by earnings (150% earnings payout ratio) nor is it covered by cash flows (108% cash payout ratio). The dividend has increased by an average of 17% per year over the past 10 years. However, payments have been volatile during that time. The company's earnings per share (EPS) would need to grow by 67% to bring the payout ratio under control. EPS is expected to grow by 64% over the next 3 years, which means the dividend may need to be reduced to reach a sustainable payout ratio. Recent Insider Transactions • Dec 22
Operations Director recently bought kr51k worth of stock On the 17th of December, Vitor Anjos bought around 500 shares on-market at roughly kr101 per share. This transaction amounted to 25% of their direct individual holding at the time of the trade. This was the largest purchase by an insider in the last 3 months. Vitor has been a buyer over the last 12 months, purchasing a net total of kr93k worth in shares. Announcement • Nov 05
SinterCast AB (publ) to Report Nine Months, 2026 Results on Nov 04, 2026 SinterCast AB (publ) announced that they will report nine months, 2026 results on Nov 04, 2026 Declared Dividend • Oct 02
First half dividend of kr3.50 announced Shareholders will receive a dividend of kr3.50. Ex-date: 6th November 2025 Payment date: 12th November 2025 Dividend yield will be 6.3%, which is higher than the industry average of 2.7%. Sustainability & Growth Dividend is not covered by earnings (124% earnings payout ratio) nor is it covered by cash flows (102% cash payout ratio). The dividend has increased by an average of 17% per year over the past 10 years. However, payments have been volatile during that time. The company's earnings per share (EPS) would need to grow by 38% to bring the payout ratio under control. EPS is expected to grow by 69% over the next 3 years, which is sufficient to bring the dividend into a sustainable range. Announcement • Sep 30
Sintercast AB (Publ) Appoints Ian Kershaw as Board Member and as Chairman of the Board, Effective 1 November 2025 The Extraordinary General Meeting (EGM) of SinterCast Aktiebolag was conducted on 30 September 2025. According to the proposal of the Nomination Committee, published on 4 September 2025, Mr. Ian Kershaw, a British citizen born on 10 September 1964, was elected as a new Board member and as Chairman of the Board. Mr. Kershaw will begin his tenure as Chairman on 1 November 2025. Until then, Mr. Robert Dover will continue to serve as Chairman. The new Chairman will receive Board remuneration for the period until the end of the next Annual General Meeting in the amount decided for the Chairman of the Board at the 2025 Annual General Meeting, pro rata in relation to the term of office. Mr. Kershaw has 40 years of experience in the global on-highway and off-highway transport, power /utility and alternative fuel industries, including engineering and management roles at Perkins Technology Limited and Rolls-Royce Motor Cars Limited, and consultancy and advisory roles at Arthur D Little and Ricardo UK Ltd. Currently, Mr. Kershaw is Director of Corporate Advisory Ltd. in the UK, providing advice on mergers, acquisitions, growth strategies and new technologies. Declared Dividend • Sep 08
First half dividend of kr3.50 announced Shareholders will receive a dividend of kr3.50. Ex-date: 6th November 2025 Payment date: 12th November 2025 Dividend yield will be 6.4%, which is higher than the industry average of 2.7%. Sustainability & Growth Dividend is not covered by earnings (124% earnings payout ratio) nor is it covered by cash flows (102% cash payout ratio). The dividend has increased by an average of 17% per year over the past 10 years. However, payments have been volatile during that time. The company's earnings per share (EPS) would need to grow by 38% to bring the payout ratio under control. EPS is expected to grow by 69% over the next 3 years, which is sufficient to bring the dividend into a sustainable range. Announcement • Sep 04
SinterCast AB (publ) Announces Resignation of Robert Dover as Chairman of the Board, Effective 1 November 2025 SinterCast AB (publ) announced the current Chairman, Robert Dover, has announced that he will resign from the Board on 1 November 2025. Reported Earnings • Aug 21
Second quarter 2025 earnings released: EPS: kr1.25 (vs kr1.49 in 2Q 2024) Second quarter 2025 results: EPS: kr1.25 (down from kr1.49 in 2Q 2024). Revenue: kr31.1m (down 11% from 2Q 2024). Net income: kr8.80m (down 16% from 2Q 2024). Profit margin: 28% (down from 30% in 2Q 2024). The decrease in margin was driven by lower revenue. Revenue is forecast to grow 9.3% p.a. on average during the next 3 years, compared to a 4.9% growth forecast for the Machinery industry in the United Kingdom. Announcement • Aug 20
SinterCast AB (publ) to Report First Half, 2026 Results on Aug 19, 2026 SinterCast AB (publ) announced that they will report first half, 2026 results on Aug 19, 2026 Declared Dividend • Jul 14
Dividend of kr3.50 announced Shareholders will receive a dividend of kr3.50. Ex-date: 6th November 2025 Payment date: 12th November 2025 Dividend yield will be 6.0%, which is higher than the industry average of 2.7%. Sustainability & Growth Dividend is not covered by earnings (119% earnings payout ratio). However, it is covered by cash flows (90.0% cash payout ratio). The dividend has increased by an average of 17% per year over the past 10 years. However, payments have been volatile during that time. The company's earnings per share (EPS) would need to grow by 32% to bring the payout ratio under control. EPS is expected to grow by 55% over the next 3 years, which is sufficient to bring the dividend into a sustainable range. Declared Dividend • Jun 25
Dividend of kr3.50 announced Shareholders will receive a dividend of kr3.50. Ex-date: 6th November 2025 Payment date: 12th November 2025 Dividend yield will be 6.0%, which is higher than the industry average of 2.7%. Sustainability & Growth Dividend is not covered by earnings (119% earnings payout ratio). However, it is covered by cash flows (90.0% cash payout ratio). The dividend has increased by an average of 17% per year over the past 10 years. However, payments have been volatile during that time. The company's earnings per share (EPS) would need to grow by 32% to bring the payout ratio under control. EPS is expected to grow by 55% over the next 3 years, which is sufficient to bring the dividend into a sustainable range. Declared Dividend • May 28
Dividend of kr3.50 announced Shareholders will receive a dividend of kr3.50. Ex-date: 6th November 2025 Payment date: 12th November 2025 Dividend yield will be 6.2%, which is higher than the industry average of 2.7%. Sustainability & Growth Dividend is not covered by earnings (119% earnings payout ratio). However, it is covered by cash flows (90.0% cash payout ratio). The dividend has increased by an average of 17% per year over the past 10 years. However, payments have been volatile during that time. The company's earnings per share (EPS) would need to grow by 32% to bring the payout ratio under control. EPS is expected to grow by 55% over the next 3 years, which is sufficient to bring the dividend into a sustainable range. Reported Earnings • May 01
First quarter 2025 earnings released: EPS: kr1.08 (vs kr0.88 in 1Q 2024) First quarter 2025 results: EPS: kr1.08 (up from kr0.88 in 1Q 2024). Revenue: kr27.1m (down 16% from 1Q 2024). Net income: kr7.60m (up 23% from 1Q 2024). Profit margin: 28% (up from 19% in 1Q 2024). The increase in margin was driven by lower expenses. Revenue is forecast to grow 8.8% p.a. on average during the next 3 years, compared to a 4.8% growth forecast for the Machinery industry in the United Kingdom. Announcement • Apr 30
SinterCast AB (publ) to Report Q1, 2026 Results on Apr 29, 2026 SinterCast AB (publ) announced that they will report Q1, 2026 results at 8:00 AM, Central European Standard Time on Apr 29, 2026 Reported Earnings • Mar 25
Full year 2024 earnings released: EPS: kr4.85 (vs kr5.94 in FY 2023) Full year 2024 results: EPS: kr4.85 (down from kr5.94 in FY 2023). Revenue: kr135.6m (flat on FY 2023). Net income: kr34.3m (down 19% from FY 2023). Profit margin: 25% (down from 31% in FY 2023). Revenue is forecast to grow 9.2% p.a. on average during the next 3 years, compared to a 5.0% growth forecast for the Machinery industry in the United Kingdom. Announcement • Mar 21
SinterCast AB (publ) to Report Fiscal Year 2025 Results on Feb 18, 2026 SinterCast AB (publ) announced that they will report fiscal year 2025 results at 9:00 AM, Central European Standard Time on Feb 18, 2026 Reported Earnings • Feb 20
Full year 2024 earnings released: EPS: kr4.85 (vs kr5.94 in FY 2023) Full year 2024 results: EPS: kr4.85 (down from kr5.94 in FY 2023). Revenue: kr135.6m (flat on FY 2023). Net income: kr34.3m (down 19% from FY 2023). Profit margin: 25% (down from 31% in FY 2023). Revenue is forecast to grow 9.2% p.a. on average during the next 3 years, compared to a 4.5% growth forecast for the Machinery industry in the United Kingdom. Over the last 3 years on average, earnings per share has increased by 10% per year but the company’s share price has fallen by 10% per year, which means it is significantly lagging earnings. Announcement • Nov 08
SinterCast AB (publ) to Report Q3, 2025 Results on Nov 05, 2025 SinterCast AB (publ) announced that they will report Q3, 2025 results at 8:00 AM, Central European Standard Time on Nov 05, 2025 Announcement • Sep 27
SinterCast AB (publ), Annual General Meeting, May 20, 2025 SinterCast AB (publ), Annual General Meeting, May 20, 2025, at 15:00 W. Europe Standard Time. Location: stockholm Sweden Announcement • Sep 26
SinterCast AB (publ) Announces Appointment of Nomination Committee SinterCast AB (publ) announced appointment of the members of the nomination committee. The members of the Nomination Committee have now been appointed based on the ownership structure as of 31 August 2024. Ulf Stenbeck is the Chairman of the committee. The other members of the committee are Torbjörn Gustafsson, David Walton, fund manager at Canaccord Genuity Wealth Management, and Einar Ahlström, current Board member. The committee also includes Robert Dover, Chairman of the Board of SinterCast, as an adjunct member. Declared Dividend • May 23
Dividend of kr3.05 announced Shareholders will receive a dividend of kr3.05. Ex-date: 6th November 2024 Payment date: 12th November 2024 Dividend yield will be 4.7%, which is higher than the industry average of 2.7%. Sustainability & Growth Dividend is not adequately covered by earnings (93% earnings payout ratio). However, it is covered by cash flows (89% cash payout ratio). The dividend has increased by an average of 18% per year over the past 10 years. However, payments have been volatile during that time. The company's earnings per share (EPS) would need to grow by 3.1% to bring the payout ratio under control. EPS is expected to grow by 54% over the next 3 years, which is sufficient to bring the dividend into a sustainable range. Declared Dividend • May 15
Dividend of kr3.05 announced Shareholders will receive a dividend of kr3.05. Ex-date: 22nd May 2024 Payment date: 28th May 2024 Dividend yield will be 4.7%, which is higher than the industry average of 2.7%. Sustainability & Growth Dividend is not adequately covered by earnings (93% earnings payout ratio). However, it is covered by cash flows (89% cash payout ratio). The dividend has increased by an average of 18% per year over the past 10 years. However, payments have been volatile during that time. The company's earnings per share (EPS) would need to grow by 3.1% to bring the payout ratio under control. EPS is expected to grow by 54% over the next 3 years, which is sufficient to bring the dividend into a sustainable range. Reported Earnings • Apr 25
First quarter 2024 earnings released: EPS: kr0.88 (vs kr0.89 in 1Q 2023) First quarter 2024 results: EPS: kr0.88 (down from kr0.89 in 1Q 2023). Revenue: kr32.1m (up 22% from 1Q 2023). Net income: kr6.20m (down 1.6% from 1Q 2023). Profit margin: 19% (down from 24% in 1Q 2023). The decrease in margin was driven by higher expenses. Revenue is forecast to grow 8.7% p.a. on average during the next 3 years, compared to a 4.7% growth forecast for the Machinery industry in the United Kingdom. Over the last 3 years on average, earnings per share has increased by 12% per year but the company’s share price has fallen by 12% per year, which means it is significantly lagging earnings. Declared Dividend • Apr 10
Final dividend of kr3.05 announced Shareholders will receive a dividend of kr3.05. Ex-date: 22nd May 2024 Payment date: 28th May 2024 Dividend yield will be 5.7%, which is higher than the industry average of 2.7%. Sustainability & Growth Dividend is not adequately covered by earnings (93% earnings payout ratio) nor is it covered by cash flows (108% cash payout ratio). The dividend has increased by an average of 20% per year over the past 10 years. However, payments have been volatile during that time. The company's earnings per share (EPS) would need to grow by 2.9% to bring the payout ratio under control. EPS is expected to grow by 20% over the next 3 years, which is sufficient to bring the dividend into a sustainable range. Board Change • Jan 02
Less than half of directors are independent Following the recent departure of a director, there are only 2 independent directors on the board. The company's board is composed of: 2 independent directors. 3 non-independent directors. Independent Director Steve Gill was the last independent director to join the board, commencing their role in 2020. The company's minority of independent directors is a risk according to the Simply Wall St Risk Model. Board Change • Dec 04
Less than half of directors are independent Following the recent departure of a director, there are only 2 independent directors on the board. The company's board is composed of: 2 independent directors. 3 non-independent directors. Independent Director Steve Gill was the last independent director to join the board, commencing their role in 2020. The company's minority of independent directors is a risk according to the Simply Wall St Risk Model. Recent Insider Transactions • Nov 19
CEO, President recently bought kr187k worth of stock On the 15th of November, Steve Dawson bought around 2k shares on-market at roughly kr104 per share. This transaction amounted to 4.6% of their direct individual holding at the time of the trade. This was the largest purchase by an insider in the last 3 months. Steve has been a buyer over the last 12 months, purchasing a net total of kr73k worth in shares. Reported Earnings • Nov 10
Third quarter 2023 earnings released: EPS: kr2.00 (vs kr1.55 in 3Q 2022) Third quarter 2023 results: EPS: kr2.00 (up from kr1.55 in 3Q 2022). Revenue: kr40.3m (up 35% from 3Q 2022). Net income: kr14.2m (up 29% from 3Q 2022). Profit margin: 35% (down from 37% in 3Q 2022). The decrease in margin was driven by higher expenses. Revenue is forecast to grow 11% p.a. on average during the next 3 years, compared to a 4.8% growth forecast for the Machinery industry in the United Kingdom. Board Change • Nov 08
Less than half of directors are independent Following the recent departure of a director, there are only 2 independent directors on the board. The company's board is composed of: 2 independent directors. 3 non-independent directors. Independent Director Steve Gill was the last independent director to join the board, commencing their role in 2020. The company's minority of independent directors is a risk according to the Simply Wall St Risk Model. Recent Insider Transactions • Aug 22
CEO, President recently bought kr90k worth of stock On the 18th of August, Steve Dawson bought around 901 shares on-market at roughly kr99.38 per share. This transaction amounted to 2.2% of their direct individual holding at the time of the trade. This was the largest purchase by an insider in the last 3 months. Steve has been a buyer over the last 12 months, purchasing a net total of kr230k worth in shares. Board Change • Aug 18
Less than half of directors are independent Following the recent departure of a director, there are only 2 independent directors on the board. The company's board is composed of: 2 independent directors. 3 non-independent directors. Independent Director Steve Gill was the last independent director to join the board, commencing their role in 2020. The company's minority of independent directors is a risk according to the Simply Wall St Risk Model. Board Change • Jul 17
Less than half of directors are independent Following the recent departure of a director, there are only 2 independent directors on the board. The company's board is composed of: 2 independent directors. 3 non-independent directors. Independent Director Steve Gill was the last independent director to join the board, commencing their role in 2020. The company's minority of independent directors is a risk according to the Simply Wall St Risk Model. Announcement • Jun 13
SinterCast AB (publ) Displays Industry Leading Technologies at GIFA World Foundry Trade Fair SinterCast AB (publ) welcomed its foundry customers and industry colleagues to visit the SinterCast technology display in Hall 10, Stand 38 at GIFA 2023. Held every four years in Düsseldorf, company look forward to this opportunity to display company's industry leading process control technologies and to promote the benefits of Compacted Graphite Iron (CGI). Representing 57 installations in 13 countries, the suite of technologies on display at the SinterCast stand includes foundry solutions for all levels of CGI production; traceability solutions for tracking and controlling liquid iron, cores, moulds and castings; and, a display of SinterCast-CGI components used in passenger vehicle, commercial vehicle and industrial power applications. Industry Leading CGI Process Control: With current production of more than 175,000 tonnes per year of shipped CGI castings, the fourth generation System 4000 process control system takes centre stage at the SinterCast stand. The display includes the fully automated System 4000, comprised of individual hardware modules that can be configured to suit the layout, process flow and production volume of any foundry, and the Mini-System 4000 that is purpose-built for product development, prototyping and niche volume production. GIFA 2023 also marks the launch of Version 7.1 of the SinterCast process control software with new functionalities and enhanced integration capabilities to incorporate data from foundry production equipment and to provide real-time data streaming to foundry’s process control, quality control and Manufacturing Execution Systems (MES) procedures. The System 4000 display also includes the Customer Access Terminal to enable foundry engineers to independently set process control parameters and access thermal analysis results. Industry 4.0 Traceability for Ladles, Cores, Moulds and Castings: The traceability solutions on display include the SinterCast Ladle Tracker® and the SinterCast Cast Tracker®. The Ladle Tracker uses Radio Frequency Identification (RFID) technology to ensure that every ladle reports to every step in the process and that every step is completed within the specified process limits. Ladle Tracker also identifies where and why ladles fall-out of the process, enabling foundry managers to measure, control and improve process efficiency and productivity. The Cast Tracker technology provides complete traceability for all castings. Each core – or core package – is uniquely labelled with an engraved identification code and each flask is equipped with RFID technology to link the cores and the liquid metal history for each casting. Cast Tracker ensures that every core package is within specification prior to casting, identifies the cast sequence within the ladle and measures the shake-out time. GIFA 2023 marks the launch of a new Optical Character Recognition (OCR) solution to automatically read the identification code on each casting and to input information regarding casting soundness directly into an SQL database integrated with the foundry quality system. Together, the Ladle Tracker and Cast Tracker technologies provide Industry 4.0 traceability, evolving castings from batch commodity products into unique components with fully documented production histories. Ultra-Light CGI Design Concept – The Cylinder Block Reinvented: The SinterCast stand showcases the redesign of a current production 1.2 litre petrol engine cylinder block from aluminium to CGI. The redesigned block uses CGI for the running surfaces and structural areas and durable plastic covers for the outer enclosures to provide the same cylinder block weight and engine performance, together with 54% less metal volume, approximately 40% lower manufacturing CO2 footprint and improved recyclability. The stand also showcases the high volume 2.7 litre V6 petrol engine designated as base engine on the Ford F-150 pick-up truck. Produced at Tupy foundry in Saltillo, Mexico, the SinterCast-CGI cylinder block has earned the title as the most popular engine in the most popular vehicle in America. Board Change • Jun 04
Less than half of directors are independent Following the recent departure of a director, there are only 2 independent directors on the board. The company's board is composed of: 2 independent directors. 3 non-independent directors. Independent Director Steve Gill was the last independent director to join the board, commencing their role in 2020. The company's minority of independent directors is a risk according to the Simply Wall St Risk Model. Announcement • May 17
Sintercast AB (Publ) Approves Ordinary Dividend The Annual General Meeting (AGM) of SinterCast Aktiebolag was conducted on 16 May 2023. During the AGM, approved a dividend of SEK 5.50 per share (totally SEK 38,995,731.50) for the financial year 2022, of which SEK 5.00 per share is ordinary dividend and SEK 0.50 per share is extraordinary dividend. The dividend is divided into two equal payments of SEK 2.75 per share with the record date 19 May 2023 for the first payment and the record date 10 November 2023 for the second payment. Recent Insider Transactions • May 04
CEO, President recently bought kr51k worth of stock On the 2nd of May, Steve Dawson bought around 500 shares on-market at roughly kr102 per share. This transaction amounted to 1.3% of their direct individual holding at the time of the trade. This was the largest purchase by an insider in the last 3 months. Steve has been a buyer over the last 12 months, purchasing a net total of kr93k worth in shares. Recent Insider Transactions • May 04
CEO, President recently bought kr51k worth of stock On the 2nd of May, Steve Dawson bought around 500 shares on-market at roughly kr102 per share. This transaction amounted to 1.3% of their direct individual holding at the time of the trade. This was the largest purchase by an insider in the last 3 months. Steve has been a buyer over the last 12 months, purchasing a net total of kr93k worth in shares. Reported Earnings • Apr 28
First quarter 2023 earnings released: EPS: kr0.89 (vs kr1.11 in 1Q 2022) First quarter 2023 results: EPS: kr0.89 (down from kr1.11 in 1Q 2022). Revenue: kr26.4m (down 6.0% from 1Q 2022). Net income: kr6.30m (down 20% from 1Q 2022). Profit margin: 24% (down from 28% in 1Q 2022). Revenue is forecast to grow 13% p.a. on average during the next 3 years, compared to a 5.3% growth forecast for the Machinery industry in the United Kingdom. Reported Earnings • Feb 10
Full year 2022 earnings released: EPS: kr4.67 (vs kr4.64 in FY 2021) Full year 2022 results: EPS: kr4.67 (up from kr4.64 in FY 2021). Revenue: kr118.7m (up 11% from FY 2021). Net income: kr33.1m (flat on FY 2021). Profit margin: 28% (down from 31% in FY 2021). The decrease in margin was driven by higher expenses. Revenue is forecast to grow 14% p.a. on average during the next 3 years, compared to a 6.5% growth forecast for the Machinery industry in the United Kingdom. Over the last 3 years on average, earnings per share has fallen by 8% per year but the company’s share price has fallen by 19% per year, which means it is performing significantly worse than earnings. Recent Insider Transactions • Jan 02
Independent Chairman of the Board recently bought kr69k worth of stock On the 28th of December, Jan Jonsson bought around 600 shares on-market at roughly kr115 per share. This transaction amounted to 9.1% of their direct individual holding at the time of the trade. In the last 3 months, they made an even bigger purchase worth kr72k. Jan has been a buyer over the last 12 months, purchasing a net total of kr255k worth in shares. Recent Insider Transactions • Dec 24
Independent Chairman of the Board recently bought kr72k worth of stock On the 20th of December, Jan Jonsson bought around 600 shares on-market at roughly kr120 per share. This transaction amounted to 10.0% of their direct individual holding at the time of the trade. This was the largest purchase by an insider in the last 3 months. Jan has been a buyer over the last 12 months, purchasing a net total of kr186k worth in shares. Announcement • Nov 05
SinterCast AB (Publ) Announces Second Instalment of Dividend, Payable on November 10, 2022 SinterCast AB (publ) announces second instalment of SEK 2.50 per share to be paid on 10 November 2022 with record date of 7 November 2022. Announcement • Aug 18
SinterCast AB (publ) Provides Installation Revenue Guidance for the Full Year 2022 SinterCast AB (publ) provided installation revenue guidance for the full year 2022. Following three strong years for installation revenue, with consecutive records in 2019 and 2020 and a strong finish in 2021, many of the opportunities in the installation pipeline have been realised. This, together with the Covid-induced reduction in capital expenditure in the foundry industry has resulted in a below average outlook for installation revenue in 2022. Installation revenue in the first half of the year finished at SEK 1.0 million, primarily from the sale of spare parts. The outlook for the second half of the year is similarly modest, despite the planned installation of a Ladle Tracker system at the Teksid foundry in Monclova, Mexico during the fourth quarter. Announcement • Apr 14
SinterCast AB (publ), Annual General Meeting, May 17, 2022 SinterCast AB (publ), Annual General Meeting, May 17, 2022, at 15:00 Central European Standard Time. Location: premises of the Royal Swedish Academy of Engineering Sciences (IVA), Grev Turegatan 16, Stockholm, Sweden Stockholm Sweden Agenda: To discuss Opening of the Annual General Meeting; to discuss Election of the Chairman of the Annual General Meeting; to discuss Preparation and approval of the list of shareholders entitled to vote at the meeting; to discuss Approval of the Agenda; and other subject matters. Reported Earnings • Feb 09
Full year 2021 earnings: Revenues and EPS in line with analyst expectations Full year 2021 results: EPS: kr4.64 (up from kr3.13 in FY 2020). Revenue: kr107.4m (up 13% from FY 2020). Net income: kr32.9m (up 48% from FY 2020). Profit margin: 31% (up from 23% in FY 2020). The increase in margin was driven by higher revenue. Revenue was in line with analyst estimates. Over the next year, revenue is forecast to grow 23%, compared to a 9.4% growth forecast for the industry in the United Kingdom. Reported Earnings • Aug 22
Second quarter 2021 earnings released: EPS kr1.61 (vs kr0.42 in 2Q 2020) The company reported a strong second quarter result with improved earnings, revenues and profit margins. Second quarter 2021 results: Revenue: kr28.2m (up 51% from 2Q 2020). Net income: kr11.4m (up 280% from 2Q 2020). Profit margin: 40% (up from 16% in 2Q 2020). The increase in margin was driven by higher revenue. Announcement • May 19
SinterCast AB (Publ) Approves Dividend for 2020 SinterCast AB (publ) approves dividend of SEK 4.00 per share (totally SEK 28,360,532) for the financial year 2020, of which SEK 4.00 per share is ordinary dividend and SEK 0.00 per share is extraordinary dividend. The dividend is divided into two equal payments of SEK 2.00 per share with the record date 20 May 2021 for the first payment and the record date 19 November 2021 for the second payment. Upcoming Dividend • May 12
Upcoming dividend of kr2.00 per share Eligible shareholders must have bought the stock before 19 May 2021. Payment date: 25 May 2021. Trailing yield: 2.8%. Lower than top quartile of British dividend payers (4.1%). Higher than average of industry peers (1.9%). Reported Earnings • Apr 25
First quarter 2021 earnings released: EPS kr0.97 (vs kr0.93 in 1Q 2020) The company reported a decent first quarter result with improved earnings and profit margins, although revenues were weaker. First quarter 2021 results: Revenue: kr24.3m (down 1.2% from 1Q 2020). Net income: kr6.90m (up 4.5% from 1Q 2020). Profit margin: 28% (up from 27% in 1Q 2020). The increase in margin was driven by lower expenses. Over the last 3 years on average, earnings per share has increased by 2% per year but the company’s share price has increased by 28% per year, which means it is tracking significantly ahead of earnings growth. Valuation Update With 7 Day Price Move • Apr 10
Investor sentiment improved over the past week After last week's 25% share price gain to kr155, the stock trades at a forward P/E ratio of 27x. Average forward P/E is 28x in the Machinery industry in the United Kingdom. Total returns to shareholders of 138% over the past three years. 
