Announcement • Feb 07

+ 2 more updates

Kalamazoo Resources Limited Completes Mineral Resource Estimate at its 100% Owned Ashburton Gold Project in the Pilbara Region of Western Australia

The lodes are parallel and sub-parallel over a width of 150m. West Olympus has a strike length of 350m and extends to 225mRL with parallel and sub-parallel lodes over a width of 130m. A nominal 0.3g/t cut-off and minimum 2m downhole width was used to produce sectional interpretations in Surpac. In the open pit, the closer spaced grade control data was used; away from the pit, data was extrapolated half the drillhole spacing up or down dip. The interpreted surface geology has numerous NW striking late faults; the interpreted sections were projected to these faults and terminated. A total of 9 separate wireframes were interpreted. Leapfrog software was used to create two nested grade-based shells, at nominal cut-offs of 0.3/t (Low Grade) and 0.5g/t (high grade). Drillhole intersections >0.3g/t were extracted from the database and used to define the mineralisation in the drillholes. To control the shapes of the shells, the centreline from the previous manual wireframe interpretation was digitised into a curved surface, with additional points to honour the intersections from recent Kalamazoo drilling. This curved surface was used as an anisotropy to allow the program to model around the structural flexure. For Zeus, the mineralisation trends were digitised from the previous manual interpretations and formed into a single dipping surface. Leapfrog was used to create nested grade shells at nominal 0.5g/t (low grade) and 0.8g/t (high grade) cut-offs. Reverse circulation drilling to industry standards was used to obtain samples at 1m intervals with a rig-mounted static cone splitter, from which 3kg was pulverised to produce a 30g charge for fire assay. The splitter apparatus was cleaned regularly with compressed air via the sample hose between 1m samples and by washing with water at the end of each hole as a minimum. Any 4m composite samples of approximately 3kg were collected with a sampling tube from the 1m bagged RC drill cuttings. Wet, damp, or dry sample condition was recorded for each metre. Diamond core drilling to industry standards was used to obtain diamond core from which a half core sample between 0.5m and 1.2m length was pulverised to produce a 30g charge for fire assay. Diamond core was logged and sample intervals selected based on the presence and character of mineralisation with minimum and maximum interval lengths of 0.5m and 1.2m respectively. The core sample interval was marked with a cut line by the logging geologist to define an approximate even distribution of mineralisation on each side. The core was then cut to the line with a standard core cutter and half-core sampled. Both reverse circulation and diamond core samples are sorted at ALS Laboratory in Perth and weights recorded in LIMS. Following drying at 105°C to constant mass, all samples below approximately 3kg are totally pulverised in LM5's to nominally 85% passing a 75µm screen. The few samples that are above 3kg are riffle split to <3kg prior to pulverisation. The same or similar sample preparation is stated in previous Resource Estimates or otherwise assumed for older pre-Kalamazoo samples. Kalamazoo field QC procedures involve the use of high, medium and low- grade gold certified reference standards inserted at a ratio of 1:20 and crushed feldspar blanks at 1:25 for standard sampling (1m for reverse circulation or 0.5m - 1.2m for diamond core). For 1m resampling of composited intervals Kalamazoo use high, medium and low- grade gold certified reference standards inserted at a ratio of 1:20 and crushed feldspar blanks at 1:25 A Surpac block model was created to cover the volume of the Mt Olympus and West Olympus deposits, sub-blocked to honour the volume of the wireframes. Au grades were estimated into blocks inside the domain wireframes, constructed during the geological interpretation, using ordinary kriging where kriging parameters were optimised using the Kriging Neighbourhood Analysis option in Supervisor software. 1m downhole composites of Au and S were extracted for each interpreted domain. Some domains had large populations of composites; others were much smaller. After an inspection of the means of each of the smaller domains it was decided to group the Mt Olympus domains into Group 1, Group 2 and Group 3; and to group all of the West Olympus domains into a single group. Each group of Au assays (except for Domain 22) required top- cutting to reduce the excessive variability. Top cuts were chosen from inspection of log-probability and mean and variance plots; the top cuts selected gave the best reduction in variability, as measured by the co-efficient of variation, whilst not reducing the mean by more than 5%, except in the case of West Olympus where a single extreme value required severe cutting. Parent cell sizes used were 10 x 20 x 5m with sub-cell block sizes chosen at 2.5 x 2.5 x 2.5m. For the material outside the domain wireframes, an indicator approach was chosen, using a 0.5g/t cut-off. 1m composites outside the domains were set to 1 if their grade was > 0.5g/t, and the indicator value kriged to estimate the proportion in the block as a value between 0 and 1. For reporting purposes, the proportion was converted into a block ore tonnage. The ore tonnage in the block was assigned a grade of 2.2 (Mt Olympus) or 1.6 (West Olympus), these being the mean grade of the composites > 0.5g/t for the two areas. A Surpac block model was created to cover the volume of the Peake deposit sub-blocked to honour the volume of the wireframes. Gold grades were estimated into blocks inside the domains using ordinary kriging and kriging parameters were optimised using the Kriging Neighbourhood Analysis option in Supervisor software. Variograms were modelled and in general the experimental variograms are poorly- structured and required a normal scores transformation for modelling. Block sizes chosen were 10 x 20 x 5m for the parent blocks and sub-cell blocks at 1.25 x 2.5 x 0.625m. Due to the small numbers of composites, all domains in Peake were combined into a single estimation domain. A top cut was applied to reduce the variability. It is worth noting that the denser drilling inside the pit returns a higher mean grade than the wider spaced drilling below and along strike of the pit. Waugh and Zeus Separate Surpac block models were created to cover the volume of the Waugh and Zeus deposits, each sub-blocked to honour the volume of the wireframes. The 1m downhole composites were extracted from the resource dataset and selected by the nested Leapfrog shells. For both, top cuts were chosen from inspection of log-probability and mean and variance plots; the top cuts selected gave the best reduction in variability (as measured by the CV) whilst not reducing mean by more than 5%.

Metals and Mining Industry Growth	29.18%
Revenue growth rate	45.09%
Return on equity	6.83%
Net Margin	4,716.50%
Last Earnings Update	31 Dec 2025

Date	Revenue	Earnings	G+A Expenses	R&D Expenses
31 Dec 25	0	2	1	0
30 Sep 25	0	-1	1	0
30 Jun 25	0	-4	1	0
31 Dec 24	0	-5	1	0
30 Sep 24	0	-4	1	0
30 Jun 24	0	-4	1	0
31 Dec 23	0	-1	1	0
30 Sep 23	0	-2	1	0
30 Jun 23	0	-2	2	0
31 Mar 23	0	-3	2	0
31 Dec 22	0	-3	2	0
30 Sep 22	0	-2	1	0
30 Jun 22	0	-1	0	0
31 Mar 22	0	-1	1	0
31 Dec 21	0	0	1	0
30 Sep 21	0	0	1	0
30 Jun 21	0	0	1	0
31 Mar 21	0	-1	1	0
31 Dec 20	0	-2	1	0
30 Sep 20	0	-2	2	0
30 Jun 20	0	-3	2	0
31 Mar 20	0	-2	2	0
31 Dec 19	0	-1	2	0
30 Sep 19	0	0	1	0
30 Jun 19	0	1	1	0
31 Mar 19	0	0	1	0
31 Dec 18	0	-1	1	1
30 Sep 18	0	-1	1	0
30 Jun 18	0	0	0	0
31 Mar 18	0	0	0	0
31 Dec 17	0	0	0	-1
30 Sep 17	0	-1	1	0
30 Jun 17	0	-2	1	0
31 Mar 17	3	-2	1	0
31 Dec 16	5	-2	1	0
30 Sep 16	5	-2	1	0
30 Jun 16	5	-1	0	0

Data	Last Updated (UTC time)
Company Analysis	2026/09/09 16:50
End of Day Share Price	2026/09/09 00:00
Earnings	2025/12/31
Annual Earnings	2025/06/30

Package	Data	Timeframe	Example US Source ^*
Company Financials	10 years	Income statement Cash flow statement Balance sheet	SEC Form 10-K SEC Form 10-Q
Analyst Consensus Estimates	+3 years	Forecast financials Analyst price targets	Analyst Research Reports Blue Matrix
Market Prices	30 years	Stock prices Dividends, Splits and Actions	ICE Market Data SEC Form S-1
Ownership	10 years	Top shareholders Insider trading	SEC Form 4 SEC Form 13D
Management	10 years	Leadership team Board of directors	SEC Form 10-K SEC Form DEF 14A
Key Developments	10 years	Company announcements	SEC Form 8-K

Kalamazoo Resources Past Earnings Performance

Past criteria checks 2/6

Key information

Recent past performance updates

Recent updates

Kalamazoo Resources Limited has filed a Follow-on Equity Offering in the amount of AUD 8 million.

Less than half of directors are independent

Kalamazoo Resources Limited Announces Appointment of Andrew McDougall to Chief Executive Officer, Effective May 4, 2026

Kalamazoo Resources Limited has completed a Follow-on Equity Offering in the amount of AUD 8 million.

Less than half of directors are independent

Kalamazoo Resources Limited has filed a Follow-on Equity Offering in the amount of AUD 8 million.

Kalamazoo Resources Limited, Annual General Meeting, Nov 12, 2025

Kalamazoo Resources Limited (ASX:KZR) entered into a sale and purchase agreement to acquire Xanadu Gold Project in Western Australia from Platina Resources Limited (ASX:PGM) for AUD 0.66 million.

Kalamazoo Resources Limited has filed a Follow-on Equity Offering.

Kalamazoo Resources Limited has completed a Follow-on Equity Offering in the amount of AUD 0.8 million.

Kalamazoo Resources Limited has filed a Follow-on Equity Offering in the amount of AUD 0.8 million.

Kalamazoo Resources Limited has completed a Follow-on Equity Offering in the amount of AUD 3.259301 million.

Kalamazoo Resources Limited, Annual General Meeting, Nov 22, 2024

Kalamazoo Resources Limited has completed a Follow-on Equity Offering in the amount of AUD 0.18 million.

Kalamazoo Resources Limited has filed a Follow-on Equity Offering in the amount of AUD 0.18 million.

Kalamazoo Resources Limited has completed a Follow-on Equity Offering in the amount of AUD 0.5775 million.

Kalamazoo Resources Limited has completed a Follow-on Equity Offering in the amount of AUD 0.375 million.

Kalamazoo Resources Limited has filed a Follow-on Equity Offering in the amount of AUD 1 million.

Kalamazoo Resources Limited has filed a Follow-on Equity Offering in the amount of AUD 0.275 million.

New major risk - Market cap size

New major risk - Market cap size

Kalamazoo Resources Limited Announces Resignation of Bernard Crawford as Joint Company Secretary

Kalamazoo Resources Limited Appoints Dr. Luke Mortimer as Chief Executive Officer, Effective 11 January 2024

Kalamazoo Resources Limited Appoints Ms. Carly Terzanidis as Joint Company Secretary

Kalamazoo Resources Limited, Annual General Meeting, Nov 29, 2023

New major risk - Market cap size

Kalamazoo Resources Limited Provides an Update on its Pilbara Lithium Project

Kalamazoo Resources Limited Completes Mineral Resource Estimate at its 100% Owned Ashburton Gold Project in the Pilbara Region of Western Australia

Kalamazoo Resources Limited Announces Significant Expansion in Its Granted Lithium Exploration Tenure in the Lachlan Fold Belt of Ne Victoria/Southern NSW

Less than half of directors are independent

Less than half of directors are independent

New 90-day low: €0.29

New 90-day low: €0.29

New 90-day low: €0.32

New 90-day low: €0.37

Revenue & Expenses Breakdown

Earnings and Revenue History

Free Cash Flow vs Earnings Analysis

Past Earnings Growth Analysis

Return on Equity

Return on Assets

Return on Capital Employed

Discover strong past performing companies

Company Analysis and Financial Data Status

Data Sources

Analysis Model and Snowflake

Industry and Sector Metrics

Analyst Sources