Aankondiging • Aug 30

Inspiration Mining Reports Assay Results from Maiden Diamond Drill Program At Rottenstone North Gold-Copper Project

Inspiration Mining Corp. reported drill core assay results from its maiden diamond drilling program on its 100%-owned Rottenstone Northwest Gold-Copper project in Northern Saskatchewan. The drilling program comprised 608 metres in four holes drilled between May 12 and May 26, 2026. Three holes were completed to target depth. A fourth hole was abandoned in 38 metres of overburden without reaching bedrock after helicopter support became unavailable. Ninety-four core samples were submitted to PMC Labs of Maple Ridge, British Columbia for sample preparation and geochemical analysis. All 94 core samples returned background values for copper, zinc, lead and silver, and all 92 samples with a gold determination returned background gold. No interval meets a conventional reporting cut-off and the Company is not reporting a mineral discovery. The best gold result is 0.276 g/t Au over 1.00 metre in hole RN26-001 from 22.30 metres, within a broader 8.73 metre interval averaging 0.045 g/t Au from 16.63 metres. The best silver result is 3.65 g/t Ag over 1.00 metre in hole RN26-001 from 107.39 metres. Base metals were uniformly background. The highest copper returned by any core sample was 243 ppm Cu (0.024% Cu), and three ultramafic units in hole RN26-001 returned no nickel or cobalt tenor, with nickel across the program peaking at 28.3 ppm Ni. Every interval returning gold above 0.025 g/t Au or silver above 1.0 g/t Ag is set out in Table 2. These are anomalous values only. No interval in Table 2 meets a cut-off grade that would support the reporting of a significant intercept. In Table 2, composites are length-weighted over contiguous sampled intervals with no internal gaps. Values below detection are set at half the detection limit for weighting; where every sample in a composite is below detection, the detection limit is shown. Detection limits are 0.015 g/t Au and 0.50 g/t Ag. Intervals are downhole core lengths and true widths are not known. Base metals were uniformly background across the program and no base metal interval is reported. The highest base metal values returned by any single core sample were 243 ppm Cu (0.024% Cu), 240 ppm Zn, 30.4 ppm Pb, and 28.3 ppm Ni, against a median copper of 21 ppm Cu. The complete multi-element dataset for all 94 core samples, together with the quality control results, is available from the Company on request. The three completed holes intersected a granodiorite-dominated gneiss package with intercalated pelitic and psammopelitic gneiss, tonalite and granodiorite, consistent with the amphibolite-facies supracrustal and intrusive rocks mapped regionally in the La Ronge Domain of the Trans-Hudson Orogen. RN26-001 collared into intercalated pelitic gneiss and tonalite and passed through a mafic to gabbroic unit between 61.5 and 94.7 metres. Three discrete ultramafic units were logged, at 94.7 to 96.1 metres, 189.46 to 194.58 metres and 220.4 to 225.95 metres, the thickest being 5.55 metres. Thin ultramafic slivers were logged within the granodiorite gneiss at various depths to 260.19 metres. Sulphides were sparse throughout, mostly 1 to 3% disseminated and interstitial pyrite, with trace chalcopyrite, pyrrhotite and pentlandite logged over 21.30 to 22.30 metres and again over 28.17 to 29.00 metres. Possible sphalerite was logged at 133.35 to 134.00 and 137.31 to 138.31 metres, and interstitial magnetite through the mafic unit from 63 to 94.7 metres. The 21.30 to 24.30 metre zone carries the program’s best gold (0.276 g/t over 1.00 metre at 22.30 metres), its best copper (243 ppm over 1.00 metre at 21.30 metres) and its highest sulphur (2.86% at 23.30 metres). It is the only place in the program where a coherent gold-copper-sulphur association was observed. The ultramafic units returned no nickel or cobalt tenor. Nickel across the program peaked at 28.3 ppm and cobalt at 4.6 ppm. On the evidence of these three holes, the ultramafic rocks at the collar locations tested do not carry the sulphide nickel signature of the historic Rottenstone Ni-Cu-PGE deposit to the south. RN26-002 intersected granodiorite gneiss with intercalated pelitic and psammopelitic gneiss and a thin gabbroic unit between 138.59 and 140.80 metres. Smoky-grey and white quartz veining with 1 to 3% pyrite was logged at several depths, most notably 73 to 78 metres, 110.00 to 110.85 metres and 163.83 to 164.00 metres. These vein sets are the closest textural analogue in the program to the quartz-hosted style reported elsewhere in the district, but they returned no gold above 0.024 g/t. RN26-003 was terminated at 86 metres in granodiorite and tonalite with intercalated psammopelitic gneiss. Sulphides were limited to trace interstitial pyrite. The program tested three widely separated targets across a large land position, with collar separations of 2.2, 6.1 and 8.0 kilometres. The results demonstrate that the specific structures tested are not mineralized at the depths intersected, but they do not close off the Project. The Company’s technical team considers the following the material takeaways: The targeting basis requires revalidation. The holes were sited on regional geophysics, interpreted structural corridors and Advanced Atomic Mineral Resonance Tomography satellite anomalies. None of the three holes intersected mineralization at the anomaly positions. The satellite-derived targeting will be tested against the drill results before it is used to site further holes. The quartz vein sets in RN26-002 warrant follow-up. Smoky-grey quartz veining with pyrite is present but was intersected at low volume and, on the logs, at high angles to core axis. Structural orientation data sufficient to determine vein attitude were not collected. Oriented core is recommended for any follow-up. The RN26-001 sulphide interval at 21 to 24 metres is the only coherent geochemical anomaly in the program. It is near surface, weak, and one metre of 0.276 g/t gold is not by itself material. Whether it represents the distal edge of a system or a barren sulphide occurrence cannot be resolved from one hole. Ground follow-up should precede any further drilling. Prospecting, soil geochemistry and ground geophysics over the eastern boundary trend would materially reduce the cost per target relative to helicopter-supported drilling. The Company is reviewing the program results, will complete a structural re-log of the 2026 core, and will provide an update on its 2027 exploration plans in due course. The Company has no current commitment to a follow-up drill program at Rottenstone North. Core was logged, photographed and sampled at the Company’s field facility. Sample intervals were selected on lithology and sulphide content and range from 0.40 to 1.06 metres. Core was cut in half, with one half submitted for analysis and one half retained.

Percentage CEO-salaris	100.00%
Dienstverband CEO	3.9yrs
Eigendom CEO	n/a
Management gemiddelde ambtstermijn	geen gegevens
Gemiddelde ambtstermijn bestuur	3.6yrs

Datum	Totale vergoeding	Salaris	Bedrijfswinsten
Apr 30 2026	n/a	n/a	-CA$2m
Jan 31 2026	n/a	n/a	-CA$2m
Oct 31 2025	n/a	n/a	-CA$2m
Jul 31 2025	n/a	n/a	-CA$2m
Apr 30 2025	CA$16k	CA$16k	-CA$1m

Naam	Positie	Tenure	Compensatie	Eigendom
Charles Desjardins	President	4.3yrs	CA$16.00k	geen gegevens
James Place	Independent Director	6yrs	CA$4.40k	0.19% $ 2.5k
Lorne McCarthy	Independent Director	2.8yrs	CA$4.40k	geen gegevens
Troy Marfleet	Member of Advisory Board	2.3yrs	geen gegevens	geen gegevens

Gegevens	Laatst bijgewerkt (UTC-tijd)
Bedrijfsanalyse	2026/09/10 23:38
Aandelenkoers aan het einde van de dag	2026/09/10 00:00
Inkomsten	2026/04/30
Jaarlijkse inkomsten	2026/04/30

Pakket	Gegevens	Tijdframe	Voorbeeld Amerikaanse bron ^*
Financiële gegevens bedrijf	10 jaar	Resultatenrekening Kasstroomoverzicht Balans	SEC-formulier 10-K SEC-formulier 10-Q
Consensus schattingen analisten	+3 jaar	Financiële prognoses Koersdoelen analisten	Onderzoeksrapporten van analisten Blue Matrix
Marktprijzen	30 jaar	Aandelenprijzen Dividenden, splitsingen en acties	ICE Marktgegevens SEC-formulier S-1
Eigendom	10 jaar	Top aandeelhouders Handel met voorkennis	SEC-formulier 4 SEC-formulier 13D
Beheer	10 jaar	Leiderschapsteam Raad van bestuur	SEC-formulier 10-K SEC-formulier DEF 14A
Belangrijkste ontwikkelingen	10 jaar	Bedrijfsaankondigingen	SEC-formulier 8-K

Inspiration Mining Beheer

Beheer criteriumcontroles 2/4

Belangrijke informatie

Recente managementupdates

Inspiration Mining Corp., Annual General Meeting, Apr 30, 2026

Recent updates

Inspiration Mining Reports Assay Results from Maiden Diamond Drill Program At Rottenstone North Gold-Copper Project

Inspiration Mining Corp Completes Diamond Drill Program At Rottenstone North Gold-Copper Project

Inspiration Mining Corp. announced that it has received CAD 0.321 million in funding

Inspiration Mining Corp. announced that it expects to receive CAD 0.6 million in funding

Inspiration Mining Corp. announced that it expects to receive CAD 1.05 million in funding

Inspiration Mining Corp., Annual General Meeting, Apr 30, 2026

Inspiration Energy Corp. announced that it has received CAD 0.2 million in funding

Inspiration Energy Corp. announced that it expects to receive CAD 0.2 million in funding

Inspiration Energy Corp. Announces Promising Results from AMRT Remote Sensing Survey at Rottenstone North Gold / Copper Project in Saskatchewan

Inspiration Energy Corp. Commences Atomic Mineral Resonance Tomography Survey over High Priority Drill Targets in Saskatchewan

Inspiration Energy Corp. announced that it has received CAD 0.975 million in funding

Inspiration Energy Corp. announced that it expects to receive CAD 0.975 million in funding

Analyse CEO-vergoeding

CEO

Bestuursleden

Bedrijfsanalyse en status van financiële gegevens

Gegevensbronnen

Analysemodel en Snowflake

Industrie en sector

Bronnen van analisten