View Future GrowthPower Metallic Mines 과거 순이익 실적과거 기준 점검 0/6Power Metallic Mines의 수입은 연평균 -42.7%의 비율로 감소해 온 반면, Metals and Mining 산업의 수입은 연간 8.4% 감소했습니다.핵심 정보-42.71%순이익 성장률-1.23%주당순이익(EPS) 성장률Metals and Mining 산업 성장률26.40%매출 성장률n/a자기자본이익률-665.29%순이익률n/a최근 순이익 업데이트31 Dec 2025최근 과거 실적 업데이트업데이트 없음모든 업데이트 보기Recent updates공시 • May 08Power Metallic Mines Inc Reports Additional Assays from Winter 2026 Drill ProgramPower Metallic Mines Inc. provided additional assays from its winter 2026 drill program. Additional drill holes continued to add and refine the high-grade Lion Zone ahead of the 2026 Mineral Resource Estimate (MRE). The infill drill holes in this release cover approximately 560 m down plunge extent from the core of the Lion Zone (PML-26-095) to central southwestern Lion area (PML-26-069). These holes highlight both the robust near surface mineralization as well as returning the deepest high-grade intercept at Lion. These holes will be incorporated into future mineral resource estimates and highlight the potential for open pit development. Continued evolution and support of the modelled interpretation of the Lion Zone is evidenced by PML-26-095 which intersected the interpreted core of the Lion Zone with wide intersections of high-grade copper near surface with 22.00 m @ 11.46% CuEqRec1 including 6.50 m @ 18.59% CuEqRec1 and including 4.00 m @18.62%CuEqRec1. Hole PML-26-069 tested the zone approximately 560 m south-southwest down plunge of PML-26-095 at a vertical depth of 600 m containing a moderate grade of 6.58 m @ 4.00% CuEqRec1 including a high-grade interval of 2.82 m @ 8.26% CuEqRec1. Table 1: Lion Results - Winter 2026 Hole From To Length Au Ag Cu Pd Pt Ni CuEq Rec* (m) (m) (m) (g/t) (g/t) (%) (g/t) (g/t) (%) (%) LION MRE PML-26-069 674.18 680.76 6.58 0.36 7.76 1.43 4.31 0.61 0.12 4.00 Including 674.18 677.00 2.82 0.48 13.40 2.94 9.67 1.40 0.19 8.26 PML-26-095 155.00 177.00 22.00 2.82 23.37 4.92 4.79 5.12 0.27 11.46 Including 155.00 159.00 4.00 0.60 44.95 8.62 4.76 18.18 0.45 18.62 And Including 160.50 167.00 6.50 1.15 42.88 9.41 11.69 5.98 0.56 18.59 And Including 172.00 175.00 3.00 17.12 11.79 3.41 2.27 0.04 0.09 17.12 Note: Reported length is downhole distance; true width based on model projections is estimated as 85% of downhole length 1Copper Equivalent Rec Calculation (CuEqRec1) CuEqRec represents CuEq calculated based on the following metal prices (USD): 2,360.15 $/oz Au, 27.98 $/oz Ag, 1,215.00 $/oz Pd, 1000.00 $/oz Pt, 4.00 $/lb Cu, 10.00 $/lb Ni and 22.50 $/lb Co., and recovered grades based on recent locked-cycle metallurgical recoveries by SGS Canada Inc. Exploratory Drilling – East of Tiger Drill holes PML-26-065, and -076, located to the east of Tiger, were designed to test modeled anomalies derived from the 2025 airborne VTEM survey. Both holes hit anomalous mineralization of sub-economic grades including 1 m of 0.19% Cu at 39.5-40.5 m and 1 m of 0.81 g/t Pt at 96.5-97.5m (PML-26-065). PML-25-076 displayed Lion style assemblages of Au-Cu-Ni-Pd-Pt from 207-233.5 m, averaging 0.1% CuEq. Power Metallic is expecting more assay results from the MRE drilling and regional exploration in the weeks to come. Qualified Person Joseph Campbell, P. Geo, VP Exploration at Power Metallic, is the qualified person who has reviewed and approved the technical disclosure contained in this news release. QAQC and Sampling GeoVector Management Inc. is the Consulting company retained to perform the actual drilling program, which includes core logging and sampling of the drill core. All core in this news release is either HQ or NQ sized core. Drill core is re-fitted and measured. Geotech on core includes photographs (wet & dry), rock quality index, magnetic susceptibility, conductivity, and recovery estimates. Core is logged for lithology, mineralogy, and structural features, and sample intervals are delineated and tagged. Sampled core is mechanically sawn, and half-core is retained for future reference. GeoVector's QAQC program includes regular insertion of CRM standards, duplicates, and blanks into the sample stream with a stringent review of all results. QAQC and data validation was performed, and no material errors were observed. All samples were submitted to and analyzed at Activation Laboratories Ltd, a commercial laboratory independent of Power Metallic with no interest in the Project. Actlabs is an ISO 9001 and 17025 certified and accredited laboratories. Samples submitted through Actlabs are run through standard preparation methods and analysed using RX-1 (Dry, crush (< 7 kg) up to 80% passing 2 mm, riffle split (250 g) and pulverize (mild steel) to 95% passing 105 µm) preparation methods, and using 1F2 (ICP-OES) and 1C-OES - 4-Acid near total digestion + Gold-Platinum-Palladium analysis and 8-Peroxide ICP-OES, for regular and over detection limit analysis. Pegmatite samples are analyzed using UT7 - Li up to 5%, Rb up to 2% method. Actlabs also undertake their own internal coarse and pulp duplicate analysis to ensure proper sample preparation and equipment calibration.공시 • May 04Power Metallic Mines Inc. Reports Additional Assays from Winter 2026 Drill Program At Lion ZonePower Metallic Mines Inc. had provided additional assays from its winter 2026 drill program. Drilling continued to define the high-grade Lion Zone in preparation for a 2026 Mineral Resource Estimate (MRE). The infill drill holes in this release are for holes that cover approximately 200 m of strike length from the middle core of the Lion Zone (PML-26-094) to the western edge (PML-26-104), defining mineralization at a vertical depth of approximately 100 m below surface. These holes will be important for future mineral resource estimates to an Indicated Resource classification, potentially for open pit exploitation. The 2026 winter drill campaign continues to support the modelled interpretation of the Lion Zone based on earlier wider spaced drilling and includes PML-26-094 which intersected the interpreted core of the Lion Zone and adds further support to wide intersections of high-grade copper near surface with 17.45 m @ 9.47% CuEqRec1 including 6.30 m @ 17.91% CuEqRec1. Hole PML-26-101 tested the zone approximately 100 m east of PML-26-094 at a slightly deeper vertical depth and contained high grade over a very wide intersection with 39.00 m @ 5.66% CuEqRec1 including 9.20 m @ 15.18% CuEqRec1. A further 100 m west hole PML-26-104 tested the western edge of the Lion Zone and intersected 7.40 m @ 1.07% CuEqRec1 and confirmed the expected mineralization modeled from the wider spaced earlier drilling in this area. Power Metallic is expecting more assay results from the MRE drilling and the regional exploration in the coming days and weeks. Exploratory Drilling – Between Lion and Tiger Drill holes PML-26-071, 074, and 078 were designed to test relatively shallow depths to explore for additional zones of mineralization between Lion and Tiger. While none of the holes hit sufficiently wide zones of mineralization, narrow zones included 0.8 meters @ 0.33% Cu, 0.78 g/t Pd, and 0.35 g/t Pt in hole PML-26-074, indicating the mineralizing structures are still present in the Lion to Tiger area. Qualified Person Joseph Campbell, P. Geo, VP Exploration at Power Metallic, is the qualified person who has reviewed and approved the technical disclosure contained in this news release. QAQC and Sampling GeoVector Management Inc. is the Consulting company retained to perform the actual drilling program, which includes core logging and sampling of the drill core. All core in this news release is NQ sized core. Drill core is re-fitted and measured. Geotech on core includes photographs (wet & dry), rock quality index, magnetic susceptibility, conductivity, and recovery estimates. Core is logged for lithology, mineralogy, and structural features, and sample intervals are delineated and tagged. Sampled core is mechanically sawn, and half-core is retained for future reference. GeoVector's QAQC program includes regular insertion of CRM standards, duplicates, and blanks into the sample stream with a stringent review of all results. QAQC and data validation was performed, and no material errors were observed. All samples were submitted to and analyzed at Activation Laboratories Ltd, a commercial laboratory independent of Power Metallic with no interest in the Project. Actlabs is an ISO 9001 and 17025 certified and accredited laboratories. Samples submitted through Actlabs are run through standard preparation methods and analysed using RX-1 (Dry, crush (< 7 kg) up to 80% passing 2 mm, riffle split (250 g) and pulverize (mild steel) to 95% passing 105 µm) preparation methods, and using 1F2 (ICP-OES) and 1C-OES - 4-Acid near total digestion + Gold-Platinum-Palladium analysis and 8-Peroxide ICP-OES, for regular and over detection limit analysis. Pegmatite samples are analyzed using UT7 - Li up to 5%, Rb up to 2% method. Actlabs also undertake their own internal coarse and pulp duplicate analysis to ensure proper sample preparation and equipment calibration.공시 • Apr 23Power Metallic Mines Inc., Annual General Meeting, Jun 30, 2026Power Metallic Mines Inc., Annual General Meeting, Jun 30, 2026.매출 및 비용 세부 내역Power Metallic Mines가 돈을 벌고 사용하는 방법. 최근 발표된 LTM 실적 기준.순이익 및 매출 추이OTCPK:CMCG.F 매출, 비용 및 순이익 (CAD Millions)날짜매출순이익일반관리비연구개발비31 Dec 250-3938030 Sep 250-3934030 Jun 250-2823031 Mar 250-2724031 Dec 240-2120030 Sep 240-1718030 Jun 240-1416031 Mar 240-1112031 Dec 230-1111030 Sep 230-109030 Jun 230-76031 Mar 230-54031 Dec 220-43030 Sep 220-43030 Jun 220-33031 Mar 220-55031 Dec 210-1010030 Sep 210-109030 Jun 210-109031 Mar 210-87031 Dec 200-22030 Sep 200-11030 Jun 200-11031 Mar 200-11031 Dec 190-11030 Sep 190-11030 Jun 190-11031 Mar 190-21031 Dec 180-22030 Sep 180-22030 Jun 180-21031 Mar 180-21031 Dec 170-22030 Sep 170-66030 Jun 170-66031 Mar 170-66031 Dec 160-65030 Sep 160-11030 Jun 160-11031 Mar 160-10031 Dec 150-10030 Sep 150000양질의 수익: CMCG.F 은(는) 현재 수익성이 없습니다.이익 마진 증가: CMCG.F는 현재 수익성이 없습니다.잉여현금흐름 대비 순이익 분석과거 순이익 성장 분석수익추이: CMCG.F은 수익성이 없으며 지난 5년 동안 손실이 연평균 42.7% 증가했습니다.성장 가속화: 현재 수익성이 없어 지난 1년간 CMCG.F의 수익 성장률을 5년 평균과 비교할 수 없습니다.수익 대 산업: CMCG.F은 수익성이 없어 지난 해 수익 성장률을 Metals and Mining 업계(77.8%)와 비교하기 어렵습니다.자기자본이익률높은 ROE: CMCG.F는 현재 수익성이 없으므로 자본 수익률이 음수(-665.29%)입니다.총자산이익률투하자본수익률우수한 과거 실적 기업을 찾아보세요7D1Y7D1Y7D1YMaterials 산업에서 과거 실적이 우수한 기업.View Financial Health기업 분석 및 재무 데이터 상태데이터최종 업데이트 (UTC 시간)기업 분석2026/05/20 01:04종가2026/05/20 00:00수익2025/12/31연간 수익2025/12/31데이터 소스당사의 기업 분석에 사용되는 데이터는 S&P Global Market Intelligence LLC에서 제공됩니다. 아래 데이터는 이 보고서를 생성하기 위해 분석 모델에서 사용됩니다. 데이터는 정규화되므로 소스가 제공된 후 지연이 발생할 수 있습니다.패키지데이터기간미국 소스 예시 *기업 재무제표10년손익계산서현금흐름표대차대조표SEC 양식 10-KSEC 양식 10-Q분석가 컨센서스 추정치+3년재무 예측분석가 목표주가분석가 리서치 보고서Blue Matrix시장 가격30년주가배당, 분할 및 기타 조치ICE 시장 데이터SEC 양식 S-1지분 구조10년주요 주주내부자 거래SEC 양식 4SEC 양식 13D경영진10년리더십 팀이사회SEC 양식 10-KSEC 양식 DEF 14A주요 개발10년회사 공시SEC 양식 8-K* 미국 증권에 대한 예시이며, 비(非)미국 증권에는 해당 국가의 규제 서식 및 자료원을 사용합니다.별도로 명시되지 않는 한 모든 재무 데이터는 연간 기간을 기준으로 하지만 분기별로 업데이트됩니다. 이를 TTM(최근 12개월) 또는 LTM(지난 12개월) 데이터라고 합니다. 자세히 알아보기.분석 모델 및 스노우플레이크이 보고서를 생성하는 데 사용된 분석 모델에 대한 자세한 내용은 당사의 Github 페이지에서 확인하실 수 있습니다. 또한 보고서 활용 방법에 대한 가이드와 YouTube 튜토리얼도 제공합니다.Simply Wall St 분석 모델을 설계하고 구축한 세계적 수준의 팀에 대해 알아보세요.산업 및 섹터 지표산업 및 섹터 지표는 Simply Wall St가 6시간마다 계산하며, 프로세스에 대한 자세한 내용은 Github에서 확인할 수 있습니다.분석가 소스Power Metallic Mines Inc.는 4명의 분석가가 다루고 있습니다. 이 중 2명의 분석가가 우리 보고서에 입력 데이터로 사용되는 매출 또는 수익 추정치를 제출했습니다. 분석가의 제출 자료는 하루 종일 업데이트됩니다.분석가기관Matthias GreiffenbergerGBC AGRoger BellHannam & Partners (Advisory) LLPMark La ReichmanNOBLE Capital Markets, Inc.1명의 분석가 더 보기
공시 • May 08Power Metallic Mines Inc Reports Additional Assays from Winter 2026 Drill ProgramPower Metallic Mines Inc. provided additional assays from its winter 2026 drill program. Additional drill holes continued to add and refine the high-grade Lion Zone ahead of the 2026 Mineral Resource Estimate (MRE). The infill drill holes in this release cover approximately 560 m down plunge extent from the core of the Lion Zone (PML-26-095) to central southwestern Lion area (PML-26-069). These holes highlight both the robust near surface mineralization as well as returning the deepest high-grade intercept at Lion. These holes will be incorporated into future mineral resource estimates and highlight the potential for open pit development. Continued evolution and support of the modelled interpretation of the Lion Zone is evidenced by PML-26-095 which intersected the interpreted core of the Lion Zone with wide intersections of high-grade copper near surface with 22.00 m @ 11.46% CuEqRec1 including 6.50 m @ 18.59% CuEqRec1 and including 4.00 m @18.62%CuEqRec1. Hole PML-26-069 tested the zone approximately 560 m south-southwest down plunge of PML-26-095 at a vertical depth of 600 m containing a moderate grade of 6.58 m @ 4.00% CuEqRec1 including a high-grade interval of 2.82 m @ 8.26% CuEqRec1. Table 1: Lion Results - Winter 2026 Hole From To Length Au Ag Cu Pd Pt Ni CuEq Rec* (m) (m) (m) (g/t) (g/t) (%) (g/t) (g/t) (%) (%) LION MRE PML-26-069 674.18 680.76 6.58 0.36 7.76 1.43 4.31 0.61 0.12 4.00 Including 674.18 677.00 2.82 0.48 13.40 2.94 9.67 1.40 0.19 8.26 PML-26-095 155.00 177.00 22.00 2.82 23.37 4.92 4.79 5.12 0.27 11.46 Including 155.00 159.00 4.00 0.60 44.95 8.62 4.76 18.18 0.45 18.62 And Including 160.50 167.00 6.50 1.15 42.88 9.41 11.69 5.98 0.56 18.59 And Including 172.00 175.00 3.00 17.12 11.79 3.41 2.27 0.04 0.09 17.12 Note: Reported length is downhole distance; true width based on model projections is estimated as 85% of downhole length 1Copper Equivalent Rec Calculation (CuEqRec1) CuEqRec represents CuEq calculated based on the following metal prices (USD): 2,360.15 $/oz Au, 27.98 $/oz Ag, 1,215.00 $/oz Pd, 1000.00 $/oz Pt, 4.00 $/lb Cu, 10.00 $/lb Ni and 22.50 $/lb Co., and recovered grades based on recent locked-cycle metallurgical recoveries by SGS Canada Inc. Exploratory Drilling – East of Tiger Drill holes PML-26-065, and -076, located to the east of Tiger, were designed to test modeled anomalies derived from the 2025 airborne VTEM survey. Both holes hit anomalous mineralization of sub-economic grades including 1 m of 0.19% Cu at 39.5-40.5 m and 1 m of 0.81 g/t Pt at 96.5-97.5m (PML-26-065). PML-25-076 displayed Lion style assemblages of Au-Cu-Ni-Pd-Pt from 207-233.5 m, averaging 0.1% CuEq. Power Metallic is expecting more assay results from the MRE drilling and regional exploration in the weeks to come. Qualified Person Joseph Campbell, P. Geo, VP Exploration at Power Metallic, is the qualified person who has reviewed and approved the technical disclosure contained in this news release. QAQC and Sampling GeoVector Management Inc. is the Consulting company retained to perform the actual drilling program, which includes core logging and sampling of the drill core. All core in this news release is either HQ or NQ sized core. Drill core is re-fitted and measured. Geotech on core includes photographs (wet & dry), rock quality index, magnetic susceptibility, conductivity, and recovery estimates. Core is logged for lithology, mineralogy, and structural features, and sample intervals are delineated and tagged. Sampled core is mechanically sawn, and half-core is retained for future reference. GeoVector's QAQC program includes regular insertion of CRM standards, duplicates, and blanks into the sample stream with a stringent review of all results. QAQC and data validation was performed, and no material errors were observed. All samples were submitted to and analyzed at Activation Laboratories Ltd, a commercial laboratory independent of Power Metallic with no interest in the Project. Actlabs is an ISO 9001 and 17025 certified and accredited laboratories. Samples submitted through Actlabs are run through standard preparation methods and analysed using RX-1 (Dry, crush (< 7 kg) up to 80% passing 2 mm, riffle split (250 g) and pulverize (mild steel) to 95% passing 105 µm) preparation methods, and using 1F2 (ICP-OES) and 1C-OES - 4-Acid near total digestion + Gold-Platinum-Palladium analysis and 8-Peroxide ICP-OES, for regular and over detection limit analysis. Pegmatite samples are analyzed using UT7 - Li up to 5%, Rb up to 2% method. Actlabs also undertake their own internal coarse and pulp duplicate analysis to ensure proper sample preparation and equipment calibration.
공시 • May 04Power Metallic Mines Inc. Reports Additional Assays from Winter 2026 Drill Program At Lion ZonePower Metallic Mines Inc. had provided additional assays from its winter 2026 drill program. Drilling continued to define the high-grade Lion Zone in preparation for a 2026 Mineral Resource Estimate (MRE). The infill drill holes in this release are for holes that cover approximately 200 m of strike length from the middle core of the Lion Zone (PML-26-094) to the western edge (PML-26-104), defining mineralization at a vertical depth of approximately 100 m below surface. These holes will be important for future mineral resource estimates to an Indicated Resource classification, potentially for open pit exploitation. The 2026 winter drill campaign continues to support the modelled interpretation of the Lion Zone based on earlier wider spaced drilling and includes PML-26-094 which intersected the interpreted core of the Lion Zone and adds further support to wide intersections of high-grade copper near surface with 17.45 m @ 9.47% CuEqRec1 including 6.30 m @ 17.91% CuEqRec1. Hole PML-26-101 tested the zone approximately 100 m east of PML-26-094 at a slightly deeper vertical depth and contained high grade over a very wide intersection with 39.00 m @ 5.66% CuEqRec1 including 9.20 m @ 15.18% CuEqRec1. A further 100 m west hole PML-26-104 tested the western edge of the Lion Zone and intersected 7.40 m @ 1.07% CuEqRec1 and confirmed the expected mineralization modeled from the wider spaced earlier drilling in this area. Power Metallic is expecting more assay results from the MRE drilling and the regional exploration in the coming days and weeks. Exploratory Drilling – Between Lion and Tiger Drill holes PML-26-071, 074, and 078 were designed to test relatively shallow depths to explore for additional zones of mineralization between Lion and Tiger. While none of the holes hit sufficiently wide zones of mineralization, narrow zones included 0.8 meters @ 0.33% Cu, 0.78 g/t Pd, and 0.35 g/t Pt in hole PML-26-074, indicating the mineralizing structures are still present in the Lion to Tiger area. Qualified Person Joseph Campbell, P. Geo, VP Exploration at Power Metallic, is the qualified person who has reviewed and approved the technical disclosure contained in this news release. QAQC and Sampling GeoVector Management Inc. is the Consulting company retained to perform the actual drilling program, which includes core logging and sampling of the drill core. All core in this news release is NQ sized core. Drill core is re-fitted and measured. Geotech on core includes photographs (wet & dry), rock quality index, magnetic susceptibility, conductivity, and recovery estimates. Core is logged for lithology, mineralogy, and structural features, and sample intervals are delineated and tagged. Sampled core is mechanically sawn, and half-core is retained for future reference. GeoVector's QAQC program includes regular insertion of CRM standards, duplicates, and blanks into the sample stream with a stringent review of all results. QAQC and data validation was performed, and no material errors were observed. All samples were submitted to and analyzed at Activation Laboratories Ltd, a commercial laboratory independent of Power Metallic with no interest in the Project. Actlabs is an ISO 9001 and 17025 certified and accredited laboratories. Samples submitted through Actlabs are run through standard preparation methods and analysed using RX-1 (Dry, crush (< 7 kg) up to 80% passing 2 mm, riffle split (250 g) and pulverize (mild steel) to 95% passing 105 µm) preparation methods, and using 1F2 (ICP-OES) and 1C-OES - 4-Acid near total digestion + Gold-Platinum-Palladium analysis and 8-Peroxide ICP-OES, for regular and over detection limit analysis. Pegmatite samples are analyzed using UT7 - Li up to 5%, Rb up to 2% method. Actlabs also undertake their own internal coarse and pulp duplicate analysis to ensure proper sample preparation and equipment calibration.
공시 • Apr 23Power Metallic Mines Inc., Annual General Meeting, Jun 30, 2026Power Metallic Mines Inc., Annual General Meeting, Jun 30, 2026.