View Financial HealthNational Plastic Technologies 배당 및 자사주 매입배당 기준 점검 3/6National Plastic Technologies 수익으로 충분히 충당되는 현재 수익률 0.74% 보유한 배당금 지급 회사입니다.핵심 정보0.7%배당 수익률n/a자사주 매입 수익률총 주주 수익률n/a미래 배당 수익률n/a배당 성장률n/a다음 배당 지급일n/a배당락일n/a주당 배당금n/a배당 성향10%최근 배당 및 자사주 매입 업데이트Upcoming Dividend • Aug 28Upcoming dividend of ₹1.50 per shareEligible shareholders must have bought the stock before 04 September 2025. Payment date: 11 October 2025. Payout ratio is a comfortable 10% and this is well supported by cash flows. Trailing yield: 0.7%. Lower than top quartile of Indian dividend payers (1.3%). In line with average of industry peers (0.7%).Declared Dividend • Jul 31Dividend increased to ₹1.50Dividend of ₹1.50 is 50% higher than last year. Ex-date: 4th September 2025 Payment date: 11th October 2025 Dividend yield will be 0.6%, which is lower than the industry average of 0.8%. Sustainability & Growth Dividend is well covered by both earnings (10% earnings payout ratio) and cash flows (18% cash payout ratio). The dividend has increased by an average of 22% per year over the past 2 years and payments have been stable during that time. Earnings per share has grown by 92% over the last 5 years. Unless this trend reverses, it should provide support to the dividend and adequate earnings cover.공시 • Sep 18+ 1 more updateNational Plastic Technologies Limited Approves Final Dividend for the Financial Year Ended March 31, 2024National Plastic Technologies Limited announced that at its AGM held on September 17, 2024, the shareholders approved final dividend for the financial year ended March 31, 2024, amounting to INR 1 per equity share (10% of face value of INR 10 each).Upcoming Dividend • Sep 03Upcoming dividend of ₹1.00 per shareEligible shareholders must have bought the stock before 10 September 2024. Payment date: 12 October 2024. Payout ratio is a comfortable 7.2% but the company is not cash flow positive. Trailing yield: 0.3%. Lower than top quartile of Indian dividend payers (1.1%). Lower than average of industry peers (0.6%).Declared Dividend • Aug 02Dividend of ₹1.00 announcedDividend of ₹1.00 is the same as last year. Ex-date: 10th September 2024 Payment date: 17th October 2024 Dividend yield will be 0.2%, which is lower than the industry average of 0.8%. Sustainability & Growth Dividend is covered by earnings (7% earnings payout ratio) but the company has no free cash flows available, indicating it may be using cash reserves or debt to pay the dividend. The company is yet to establish a track record of dividend growth or stability as it hasn't paid a regular dividend for at least 2 years. Earnings per share has grown by 33% over the last 5 years. Unless this trend reverses, it should provide support to the dividend and adequate earnings cover.공시 • May 17National Plastic Technologies Limited Recommends Final DividendNational Plastic Technologies Limited announced that at the board meeting held on May 15, 2024, the company recommended a final dividend of INR 1.00 per share (i.e.10 % on face value of INR 10 each), subject To Approve the shareholders of the company, which if approved, shall be paid/dispatched within thirty days from the conclusion of the Annual General Meeting of the Company. The Record date for the purpose of final dividend shall be intimated later.모든 업데이트 보기Recent updatesReported Earnings • May 27Full year 2026 earnings released: EPS: ₹15.09 (vs ₹14.85 in FY 2025)Full year 2026 results: EPS: ₹15.09 (up from ₹14.85 in FY 2025). Revenue: ₹3.41b (up 9.9% from FY 2025). Net income: ₹91.7m (up 1.6% from FY 2025). Profit margin: 2.7% (down from 2.9% in FY 2025). The decrease in margin was driven by higher expenses. Over the last 3 years on average, earnings per share has increased by 12% per year but the company’s share price has increased by 18% per year, which means it is tracking significantly ahead of earnings growth.Reported Earnings • Feb 03Third quarter 2026 earnings released: EPS: ₹4.54 (vs ₹3.75 in 3Q 2025)Third quarter 2026 results: EPS: ₹4.54 (up from ₹3.75 in 3Q 2025). Revenue: ₹887.7m (up 12% from 3Q 2025). Net income: ₹27.6m (up 21% from 3Q 2025). Profit margin: 3.1% (up from 2.9% in 3Q 2025). The increase in margin was driven by higher revenue. Over the last 3 years on average, earnings per share has increased by 17% per year but the company’s share price has increased by 30% per year, which means it is tracking significantly ahead of earnings growth.New Risk • Nov 21New minor risk - Share price stabilityThe company's share price has been volatile over the past 3 months. It is more volatile than 75% of Indian stocks, typically moving 6.9% a week. This is considered a minor risk. Share price volatility indicates the stock is highly sensitive to market conditions or economic conditions rather than being sensitive to its own business performance, which may also be inconsistent. It also increases the risk of potential losses in the short term as the stock tends to have larger drops in price more frequently than other stocks. Currently, the following risks have been identified for the company: Major Risk Debt is not well covered by operating cash flow (11% operating cash flow to total debt). Minor Risks Paying a dividend despite having no free cash flows. Share price has been volatile over the past 3 months (6.9% average weekly change). Market cap is less than US$100m (₹1.90b market cap, or US$21.2m).Reported Earnings • Nov 02Second quarter 2026 earnings released: EPS: ₹4.45 (vs ₹4.17 in 2Q 2025)Second quarter 2026 results: EPS: ₹4.45 (up from ₹4.17 in 2Q 2025). Revenue: ₹888.8m (up 2.4% from 2Q 2025). Net income: ₹27.1m (up 6.8% from 2Q 2025). Profit margin: 3.0% (in line with 2Q 2025). Over the last 3 years on average, earnings per share has increased by 22% per year but the company’s share price has increased by 46% per year, which means it is tracking significantly ahead of earnings growth.공시 • Oct 25National Plastic Technologies Limited to Report Q2, 2026 Results on Oct 31, 2025National Plastic Technologies Limited announced that they will report Q2, 2026 results at 9:15 AM, Indian Standard Time on Oct 31, 2025Valuation Update With 7 Day Price Move • Sep 16Investor sentiment improves as stock rises 16%After last week's 16% share price gain to ₹280, the stock trades at a trailing P/E ratio of 18.6x. Average trailing P/E is 27x in the Chemicals industry in India. Total returns to shareholders of 250% over the past three years.Upcoming Dividend • Aug 28Upcoming dividend of ₹1.50 per shareEligible shareholders must have bought the stock before 04 September 2025. Payment date: 11 October 2025. Payout ratio is a comfortable 10% and this is well supported by cash flows. Trailing yield: 0.7%. Lower than top quartile of Indian dividend payers (1.3%). In line with average of industry peers (0.7%).공시 • Aug 18+ 2 more updatesNational Plastic Technologies Limited to Report Q4, 2026 Results on May 30, 2026National Plastic Technologies Limited announced that they will report Q4, 2026 results on May 30, 2026Declared Dividend • Jul 31Dividend increased to ₹1.50Dividend of ₹1.50 is 50% higher than last year. Ex-date: 4th September 2025 Payment date: 11th October 2025 Dividend yield will be 0.6%, which is lower than the industry average of 0.8%. Sustainability & Growth Dividend is well covered by both earnings (10% earnings payout ratio) and cash flows (18% cash payout ratio). The dividend has increased by an average of 22% per year over the past 2 years and payments have been stable during that time. Earnings per share has grown by 92% over the last 5 years. Unless this trend reverses, it should provide support to the dividend and adequate earnings cover.Reported Earnings • Jul 30First quarter 2026 earnings released: EPS: ₹3.66 (vs ₹3.43 in 1Q 2025)First quarter 2026 results: EPS: ₹3.66 (up from ₹3.43 in 1Q 2025). Revenue: ₹740.7m (up 7.9% from 1Q 2025). Net income: ₹22.2m (up 6.6% from 1Q 2025). Profit margin: 3.0% (in line with 1Q 2025). Over the last 3 years on average, earnings per share has increased by 26% per year but the company’s share price has increased by 54% per year, which means it is tracking significantly ahead of earnings growth.공시 • Jul 29National Plastic Technologies Limited, Annual General Meeting, Sep 11, 2025National Plastic Technologies Limited, Annual General Meeting, Sep 11, 2025, at 10:30 Indian Standard Time. Location: the arihanth hall, madras hotel, ashoka, 47, pantheon rd., egmore, chennai - 600008, India공시 • Jul 23National Plastic Technologies Limited to Report Q1, 2026 Results on Jul 29, 2025National Plastic Technologies Limited announced that they will report Q1, 2026 results on Jul 29, 2025Valuation Update With 7 Day Price Move • Jun 25Investor sentiment improves as stock rises 16%After last week's 16% share price gain to ₹286, the stock trades at a trailing P/E ratio of 19.3x. Average trailing P/E is 28x in the Chemicals industry in India. Total returns to shareholders of 272% over the past three years.New Risk • May 28New major risk - Financial positionThe company's debt is not well covered by operating cash flow. Operating cash flow to total debt ratio: 20% This is considered a major risk. If the company's operating cash flows are too small relative to the size of their debt, it increases their balance sheet risk. The company has less cash from operations to cover its expenses from servicing large debt and it increases the risk of liquidity issues. It also extends the time it would take for the company to pay back the debt in full, meaning it may not be able to easily pay it all off in a distress scenario. Currently, the following risks have been identified for the company: Major Risk Debt is not well covered by operating cash flow (20% operating cash flow to total debt). Minor Risk Market cap is less than US$100m (₹1.64b market cap, or US$19.1m).Reported Earnings • May 28Full year 2025 earnings released: EPS: ₹14.85 (vs ₹13.85 in FY 2024)Full year 2025 results: EPS: ₹14.85 (up from ₹13.85 in FY 2024). Revenue: ₹3.11b (up 15% from FY 2024). Net income: ₹90.3m (up 7.3% from FY 2024). Profit margin: 2.9% (down from 3.1% in FY 2024). The decrease in margin was driven by higher expenses. Over the last 3 years on average, earnings per share has increased by 30% per year but the company’s share price has increased by 49% per year, which means it is tracking significantly ahead of earnings growth.Valuation Update With 7 Day Price Move • Apr 24Investor sentiment improves as stock rises 18%After last week's 18% share price gain to ₹277, the stock trades at a trailing P/E ratio of 18.6x. Average trailing P/E is 25x in the Chemicals industry in India. Total returns to shareholders of 238% over the past three years.Board Change • Feb 21Less than half of directors are independentFollowing the recent departure of a director, there are only 3 independent directors on the board. The company's board is composed of: 3 independent directors. 4 non-independent directors. Non-Executive Independent Director Deepa Ramani was the last independent director to join the board, commencing their role in 2024. The company's minority of independent directors is a risk according to the Simply Wall St Risk Model.Reported Earnings • Jan 30Third quarter 2025 earnings released: EPS: ₹3.75 (vs ₹3.27 in 3Q 2024)Third quarter 2025 results: EPS: ₹3.75 (up from ₹3.27 in 3Q 2024). Revenue: ₹790.8m (up 22% from 3Q 2024). Net income: ₹22.8m (up 15% from 3Q 2024). Profit margin: 2.9% (down from 3.1% in 3Q 2024). The decrease in margin was driven by higher expenses. Over the last 3 years on average, earnings per share has increased by 31% per year but the company’s share price has increased by 54% per year, which means it is tracking significantly ahead of earnings growth.New Risk • Dec 23New minor risk - Share price stabilityThe company's share price has been volatile over the past 3 months. It is more volatile than 75% of Indian stocks, typically moving 7.6% a week. This is considered a minor risk. Share price volatility indicates the stock is highly sensitive to market conditions or economic conditions rather than being sensitive to its own business performance, which may also be inconsistent. It also increases the risk of potential losses in the short term as the stock tends to have larger drops in price more frequently than other stocks. Currently, the following risks have been identified for the company: Minor Risks High level of debt (108% net debt to equity). Share price has been volatile over the past 3 months (7.6% average weekly change). Market cap is less than US$100m (₹2.97b market cap, or US$35.0m).Valuation Update With 7 Day Price Move • Dec 18Investor sentiment improves as stock rises 22%After last week's 22% share price gain to ₹471, the stock trades at a trailing P/E ratio of 32.6x. Average trailing P/E is 32x in the Chemicals industry in India. Total returns to shareholders of 556% over the past three years.Recent Insider Transactions • Nov 29Non-Executive Director recently bought ₹1.1m worth of stockOn the 21st of November, Manju Parakh bought around 3k shares on-market at roughly ₹392 per share. This transaction amounted to less than 1% of their direct individual holding at the time of the trade. This was the largest purchase by an insider in the last 3 months. Insiders have collectively bought ₹3.1m more in shares than they have sold in the last 12 months.Reported Earnings • Oct 31Second quarter 2025 earnings released: EPS: ₹4.17 (vs ₹3.61 in 2Q 2024)Second quarter 2025 results: EPS: ₹4.17 (up from ₹3.61 in 2Q 2024). Revenue: ₹868.0m (up 18% from 2Q 2024). Net income: ₹25.4m (up 16% from 2Q 2024). Profit margin: 2.9% (in line with 2Q 2024). Over the last 3 years on average, earnings per share has increased by 30% per year but the company’s share price has increased by 74% per year, which means it is tracking significantly ahead of earnings growth.공시 • Sep 18+ 1 more updateNational Plastic Technologies Limited Approves Final Dividend for the Financial Year Ended March 31, 2024National Plastic Technologies Limited announced that at its AGM held on September 17, 2024, the shareholders approved final dividend for the financial year ended March 31, 2024, amounting to INR 1 per equity share (10% of face value of INR 10 each).Upcoming Dividend • Sep 03Upcoming dividend of ₹1.00 per shareEligible shareholders must have bought the stock before 10 September 2024. Payment date: 12 October 2024. Payout ratio is a comfortable 7.2% but the company is not cash flow positive. Trailing yield: 0.3%. Lower than top quartile of Indian dividend payers (1.1%). Lower than average of industry peers (0.6%).공시 • Aug 24+ 2 more updatesNational Plastic Technologies Limited to Report Q4, 2025 Results on May 30, 2025National Plastic Technologies Limited announced that they will report Q4, 2025 results on May 30, 2025Declared Dividend • Aug 02Dividend of ₹1.00 announcedDividend of ₹1.00 is the same as last year. Ex-date: 10th September 2024 Payment date: 17th October 2024 Dividend yield will be 0.2%, which is lower than the industry average of 0.8%. Sustainability & Growth Dividend is covered by earnings (7% earnings payout ratio) but the company has no free cash flows available, indicating it may be using cash reserves or debt to pay the dividend. The company is yet to establish a track record of dividend growth or stability as it hasn't paid a regular dividend for at least 2 years. Earnings per share has grown by 33% over the last 5 years. Unless this trend reverses, it should provide support to the dividend and adequate earnings cover.New Risk • Aug 01New major risk - Financial positionThe company's debt is not well covered by operating cash flow. Operating cash flow to total debt ratio: 19% This is considered a major risk. If the company's operating cash flows are too small relative to the size of their debt, it increases their balance sheet risk. The company has less cash from operations to cover its expenses from servicing large debt and it increases the risk of liquidity issues. It also extends the time it would take for the company to pay back the debt in full, meaning it may not be able to easily pay it all off in a distress scenario. Currently, the following risks have been identified for the company: Major Risk Debt is not well covered by operating cash flow (19% operating cash flow to total debt). Minor Risks Paying a dividend despite having no free cash flows. Market cap is less than US$100m (₹2.44b market cap, or US$29.1m).공시 • Jul 31National Plastic Technologies Limited, Annual General Meeting, Sep 17, 2024National Plastic Technologies Limited, Annual General Meeting, Sep 17, 2024, at 10:35 Indian Standard Time. Location: arihant hall, madras hotel ashoka, 47, pantheon road, egmore- 600008, chennai IndiaReported Earnings • Jul 31First quarter 2025 earnings released: EPS: ₹3.43 (vs ₹3.39 in 1Q 2024)First quarter 2025 results: EPS: ₹3.43 (up from ₹3.39 in 1Q 2024). Revenue: ₹686.8m (up 12% from 1Q 2024). Net income: ₹20.9m (up 1.2% from 1Q 2024). Profit margin: 3.0% (down from 3.4% in 1Q 2024). The decrease in margin was driven by higher expenses. Over the last 3 years on average, earnings per share has increased by 31% per year but the company’s share price has increased by 87% per year, which means it is tracking significantly ahead of earnings growth.공시 • Jul 23National Plastic Technologies Limited to Report Q1, 2025 Results on Jul 30, 2024National Plastic Technologies Limited announced that they will report Q1, 2025 results on Jul 30, 2024Valuation Update With 7 Day Price Move • Jul 22Investor sentiment improves as stock rises 16%After last week's 16% share price gain to ₹454, the stock trades at a trailing P/E ratio of 32.8x. Average trailing P/E is 35x in the Chemicals industry in India. Total returns to shareholders of 566% over the past three years.Reported Earnings • May 17Full year 2024 earnings released: EPS: ₹13.85 (vs ₹10.12 in FY 2023)Full year 2024 results: EPS: ₹13.85 (up from ₹10.12 in FY 2023). Revenue: ₹2.69b (up 28% from FY 2023). Net income: ₹84.2m (up 37% from FY 2023). Profit margin: 3.1% (up from 2.9% in FY 2023). The increase in margin was driven by higher revenue. Over the last 3 years on average, earnings per share has increased by 38% per year but the company’s share price has increased by 113% per year, which means it is tracking significantly ahead of earnings growth.공시 • May 17National Plastic Technologies Limited Recommends Final DividendNational Plastic Technologies Limited announced that at the board meeting held on May 15, 2024, the company recommended a final dividend of INR 1.00 per share (i.e.10 % on face value of INR 10 each), subject To Approve the shareholders of the company, which if approved, shall be paid/dispatched within thirty days from the conclusion of the Annual General Meeting of the Company. The Record date for the purpose of final dividend shall be intimated later.Valuation Update With 7 Day Price Move • Mar 01Investor sentiment improves as stock rises 32%After last week's 32% share price gain to ₹426, the stock trades at a trailing P/E ratio of 32.2x. Average trailing P/E is 30x in the Chemicals industry in India. Total returns to shareholders of 1,061% over the past three years.Valuation Update With 7 Day Price Move • Feb 14Investor sentiment deteriorates as stock falls 16%After last week's 16% share price decline to ₹305, the stock trades at a trailing P/E ratio of 23x. Average trailing P/E is 29x in the Chemicals industry in India. Total returns to shareholders of 967% over the past three years.New Risk • Feb 09New minor risk - Share price stabilityThe company's share price has been volatile over the past 3 months. It is more volatile than 75% of Indian stocks, typically moving 7.9% a week. This is considered a minor risk. Share price volatility indicates the stock is highly sensitive to market conditions or economic conditions rather than being sensitive to its own business performance, which may also be inconsistent. It also increases the risk of potential losses in the short term as the stock tends to have larger drops in price more frequently than other stocks. Currently, the following risks have been identified for the company: Minor Risks High level of debt (190% net debt to equity). Short dividend paying track record (1 year of continuous dividend payments). Share price has been volatile over the past 3 months (7.9% average weekly change). Market cap is less than US$100m (₹1.86b market cap, or US$22.4m).Reported Earnings • Jan 31Third quarter 2024 earnings releasedThird quarter 2024 results: Revenue: ₹650.6m (up 18% from 3Q 2023). Net income: ₹19.9m (up 24% from 3Q 2023). Profit margin: 3.1% (up from 2.9% in 3Q 2023). The increase in margin was driven by higher revenue.공시 • Jan 24National Plastic Technologies Limited to Report Q3, 2024 Results on Jan 30, 2024National Plastic Technologies Limited announced that they will report Q3, 2024 results on Jan 30, 2024Recent Insider Transactions • Jan 02Non-Executive Director recently bought ₹1.0m worth of stockOn the 28th of December, Manju Parakh bought around 3k shares on-market at roughly ₹398 per share. This transaction amounted to less than 1% of their direct individual holding at the time of the trade. In the last 3 months, they made an even bigger purchase worth ₹1.1m. Insiders have collectively bought ₹3.2m more in shares than they have sold in the last 12 months.Recent Insider Transactions • Dec 27Non-Executive Director recently bought ₹1.1m worth of stockOn the 22nd of December, Manju Parakh bought around 3k shares on-market at roughly ₹369 per share. This transaction amounted to less than 1% of their direct individual holding at the time of the trade. This was the largest purchase by an insider in the last 3 months. Insiders have collectively bought ₹2.2m more in shares than they have sold in the last 12 months.New Risk • Nov 10New major risk - Financial positionThe company's interest payments are not well covered by earnings. Net interest cover: 2.9x This is considered a major risk. If the company is unable to fund interest repayments on its debt through profits, it may be forced into reducing its debt burden through selling assets, undertaking a potentially costly capital raising or even into bankruptcy in the worst case scenario. Currently, the following risks have been identified for the company: Major Risk Interest payments are not well covered by earnings (2.9x net interest cover). Minor Risk Market cap is less than US$100m (₹1.92b market cap, or US$23.1m).Valuation Update With 7 Day Price Move • Nov 07Investor sentiment improves as stock rises 20%After last week's 20% share price gain to ₹304, the stock trades at a trailing P/E ratio of 24.1x. Average trailing P/E is 27x in the Chemicals industry in India. Total returns to shareholders of 1,071% over the past three years.Reported Earnings • Nov 02Second quarter 2024 earnings released: EPS: ₹3.61 (vs ₹2.13 in 2Q 2023)Second quarter 2024 results: EPS: ₹3.61 (up from ₹2.13 in 2Q 2023). Revenue: ₹735.3m (up 31% from 2Q 2023). Net income: ₹21.9m (up 69% from 2Q 2023). Profit margin: 3.0% (up from 2.3% in 2Q 2023). The increase in margin was driven by higher revenue. Over the last 3 years on average, earnings per share has increased by 51% per year but the company’s share price has increased by 121% per year, which means it is tracking significantly ahead of earnings growth.공시 • Oct 26National Plastic Technologies Limited to Report Q2, 2024 Results on Oct 31, 2023National Plastic Technologies Limited announced that they will report Q2, 2024 results at 3:30 PM, Indian Standard Time on Oct 31, 2023공시 • Sep 14National Plastic Technologies Limited Approves Final Divided for the Financial Year Ended March 31, 2023National Plastic Technologies Limited approved final divided of INR 1 per equity share for the financial year ended March 31, 2023 at the Annual General Meeting held on September 13, 2023.Upcoming Dividend • Aug 30Upcoming dividend of ₹1.00 per share at 0.5% yieldEligible shareholders must have bought the stock before 06 September 2023. Payment date: 13 October 2023. Trailing yield: 0.5%. Lower than top quartile of Indian dividend payers (1.4%). Lower than average of industry peers (0.8%).공시 • Jul 28National Plastic Technologies Limited, Annual General Meeting, Sep 13, 2023National Plastic Technologies Limited, Annual General Meeting, Sep 13, 2023, at 10:30 Indian Standard Time. Location: Hall of Ragaas, 47, First Avenue, Sastri Nagar, Adyar Chennai India공시 • Jul 27National Plastic Technologies Limited Proposes Final Dividend for the Year Ended on March 31, 2023National Plastic Technologies Limited announced that the record date for determining entitlement of members to the final dividend of INR 1 per share for the financial year ended on March 31, 2023, if approved at the AGM to be held on 13 September 2023 is fixed as 6 September, 2023 and shall be paid within 30 days from the declaration and in any case not later than October 11, 2023.Reported Earnings • Jul 27First quarter 2024 earnings released: EPS: ₹3.39 (vs ₹2.39 in 1Q 2023)First quarter 2024 results: EPS: ₹3.39 (up from ₹2.39 in 1Q 2023). Revenue: ₹614.5m (up 35% from 1Q 2023). Net income: ₹20.6m (up 42% from 1Q 2023). Profit margin: 3.4% (up from 3.2% in 1Q 2023). The increase in margin was driven by higher revenue. Over the last 3 years on average, earnings per share has increased by 57% per year but the company’s share price has increased by 63% per year, which means it is tracking significantly ahead of earnings growth.Recent Insider Transactions • Jun 29Non-Executive Director recently bought ₹1.1m worth of stockOn the 27th of June, Manju Parakh bought around 8k shares on-market at roughly ₹145 per share. This transaction amounted to 1.4% of their direct individual holding at the time of the trade. This was the largest purchase by an insider in the last 3 months. This was the only on-market transaction from insiders over the last 12 months.Valuation Update With 7 Day Price Move • Jun 23Investor sentiment improves as stock rises 15%After last week's 15% share price gain to ₹145, the stock trades at a trailing P/E ratio of 14.3x. Average trailing P/E is 22x in the Chemicals industry in India. Total returns to shareholders of 292% over the past three years.Reported Earnings • May 13Full year 2023 earnings released: EPS: ₹10.12 (vs ₹5.98 in FY 2022)Full year 2023 results: EPS: ₹10.12 (up from ₹5.98 in FY 2022). Revenue: ₹2.10b (up 57% from FY 2022). Net income: ₹61.5m (up 69% from FY 2022). Profit margin: 2.9% (up from 2.7% in FY 2022). The increase in margin was driven by higher revenue. Over the last 3 years on average, earnings per share has increased by 52% per year but the company’s share price has increased by 64% per year, which means it is tracking significantly ahead of earnings growth.공시 • May 13National Plastic Technologies Limited Recommends Final DividendNational Plastic Technologies Limited at its board meeting held on May 11, 2023 recommended final dividend of INR 1.00 per share subject To Approve the shareholders of the company, which if approved, shall be paid/dispatched within thirty days from the conclusion of the Annual General Meeting of the Company. The Record date for the purpose of final dividend shall be intimated later.Valuation Update With 7 Day Price Move • May 12Investor sentiment improves as stock rises 22%After last week's 22% share price gain to ₹130, the stock trades at a trailing P/E ratio of 17.3x. Average trailing P/E is 20x in the Chemicals industry in India. Total returns to shareholders of 340% over the past three years.Valuation Update With 7 Day Price Move • Apr 21Investor sentiment improves as stock rises 16%After last week's 16% share price gain to ₹107, the stock trades at a trailing P/E ratio of 14.3x. Average trailing P/E is 20x in the Chemicals industry in India. Total returns to shareholders of 265% over the past three years.Reported Earnings • Feb 09Third quarter 2023 earnings released: EPS: ₹2.63 (vs ₹1.71 in 3Q 2022)Third quarter 2023 results: EPS: ₹2.63 (up from ₹1.71 in 3Q 2022). Revenue: ₹552.3m (up 71% from 3Q 2022). Net income: ₹16.0m (up 54% from 3Q 2022). Profit margin: 2.9% (down from 3.2% in 3Q 2022). The decrease in margin was driven by higher expenses. Over the last 3 years on average, earnings per share has increased by 46% per year whereas the company’s share price has increased by 47% per year.공시 • Feb 09National Plastic Technologies Limited Announces Resignation of Venkatesan N as Additional DirectorNational Plastic Technologies Limited informed that the Mr. Venkatesan N, has resigned as Additional Director from the Board of Directors of the Company effective from February 09, 2023.Valuation Update With 7 Day Price Move • Dec 30Investor sentiment improved over the past weekAfter last week's 19% share price gain to ₹124, the stock trades at a trailing P/E ratio of 18.9x. Average trailing P/E is 20x in the Chemicals industry in India. Total returns to shareholders of 256% over the past three years.Valuation Update With 7 Day Price Move • Dec 15Investor sentiment improved over the past weekAfter last week's 20% share price gain to ₹124, the stock trades at a trailing P/E ratio of 18.9x. Average trailing P/E is 21x in the Chemicals industry in India. Total returns to shareholders of 273% over the past three years.Valuation Update With 7 Day Price Move • Nov 30Investor sentiment improved over the past weekAfter last week's 26% share price gain to ₹108, the stock trades at a trailing P/E ratio of 16.5x. Average trailing P/E is 20x in the Chemicals industry in India. Total returns to shareholders of 208% over the past three years.Board Change • Nov 16Less than half of directors are independentFollowing the recent departure of a director, there are only 2 independent directors on the board. The company's board is composed of: 2 independent directors. 4 non-independent directors. Non-Executive Independent Director Ajit Chordia was the last independent director to join the board, commencing their role in 2010. The company's minority of independent directors is a risk according to the Simply Wall St Risk Model.공시 • Nov 11National Plastic Technologies Limited Appoints Venkatesan N as Additional Director (Whole Time Director)National Plastic Technologies Limited announced that the Mr. Venkatesan N, has been appointed as Additional Director in the capacity of Whole time Director for a period of 3 years, with effect from 10 November 2022. Mr. Venkatesan is a Mechanical Engineer having an experience of about 32 years in Manufacturing Industry with focus on Plastic Injection Molding. He joined the Group in the year 1998 as a Production Manager and is currently the Vice President Operations of its group. He is overseeing the operations of all the Company's Plants.공시 • Sep 23National Plastic Technologies Limited Reappoints Mr. Alok Parakh as Joint Managing Director, Effective September 30, 2022National Plastic Technologies Limited announced that the Mr. Alok Parakh, Joint Managing Director has expressed his desire not to be reappointed as Joint Managing Director on expiry of his term on September 30, 2022 due to his pre-occupation as a Managing Director in National Polyplast (India) Pvt Ltd. Accordingly, he has resigned from the Directorship of the Company with effect from October 1, 2022. Hence, He will cease lo be a Director of the company with effect from October 1, 2022.공시 • Aug 31+ 2 more updatesNational Plastic Technologies Limited to Report Q2, 2023 Results on Nov 14, 2022National Plastic Technologies Limited announced that they will report Q2, 2023 results on Nov 14, 2022공시 • Aug 19National Plastic Technologies Limited, Annual General Meeting, Sep 22, 2022National Plastic Technologies Limited, Annual General Meeting, Sep 22, 2022, at 10:30 Indian Standard Time. Location: at the Hall of Ragaas, No.2, Sastri Nagar, Adyar, Chennai IndiaReported Earnings • Aug 15First quarter 2023 earnings released: EPS: ₹2.39 (vs ₹1.64 in 1Q 2022)First quarter 2023 results: EPS: ₹2.39 (up from ₹1.64 in 1Q 2022). Revenue: ₹454.5m (up 100% from 1Q 2022). Net income: ₹14.6m (up 46% from 1Q 2022). Profit margin: 3.2% (down from 4.4% in 1Q 2022). The decrease in margin was driven by higher expenses. Over the last 3 years on average, earnings per share has increased by 38% per year but the company’s share price has only increased by 28% per year, which means it is significantly lagging earnings growth.공시 • Aug 03National Plastic Technologies Limited to Report Q1, 2023 Results on Aug 09, 2022National Plastic Technologies Limited announced that they will report Q1, 2023 results on Aug 09, 2022Board Change • Apr 27Less than half of directors are independentNo new directors have joined the board in the last 3 years. The company's board is composed of: No new directors. 3 experienced directors. 3 highly experienced directors. 2 independent directors (4 non-independent directors). Non-Executive Independent Director Ajit Chordia was the last independent director to join the board, commencing their role in 2010. The following issues are considered to be risks according to the Simply Wall St Risk Model: Minority of independent directors. Insufficient board refreshment.Valuation Update With 7 Day Price Move • Mar 24Investor sentiment improved over the past weekAfter last week's 16% share price gain to ₹90.25, the stock trades at a trailing P/E ratio of 12.2x. Average trailing P/E is 19x in the Chemicals industry in India. Total returns to shareholders of 162% over the past three years.Reported Earnings • Feb 08Third quarter 2022 earnings: Revenues and EPS in line with analyst expectationsThird quarter 2022 results: EPS: ₹1.71 (down from ₹1.98 in 3Q 2021). Revenue: ₹323.2m (up 17% from 3Q 2021). Net income: ₹10.4m (down 14% from 3Q 2021). Profit margin: 3.2% (down from 4.4% in 3Q 2021). The decrease in margin was driven by higher expenses. Revenue was in line with analyst estimates. Over the last 3 years on average, earnings per share has increased by 24% per year but the company’s share price has increased by 31% per year, which means it is tracking significantly ahead of earnings growth.Valuation Update With 7 Day Price Move • Dec 28Investor sentiment improved over the past weekAfter last week's 19% share price gain to ₹85.30, the stock trades at a trailing P/E ratio of 13.9x. Average trailing P/E is 18x in the Chemicals industry in India. Total returns to shareholders of 162% over the past three years.Valuation Update With 7 Day Price Move • Sep 24Investor sentiment improved over the past weekAfter last week's 15% share price gain to ₹73.90, the stock trades at a trailing P/E ratio of 12x. Average trailing P/E is 19x in the Chemicals industry in India. Total returns to shareholders of 97% over the past three years.Valuation Update With 7 Day Price Move • Aug 30Investor sentiment improved over the past weekAfter last week's 15% share price gain to ₹66.90, the stock trades at a trailing P/E ratio of 10.9x. Average trailing P/E is 17x in the Chemicals industry in India. Total returns to shareholders of 81% over the past three years.Reported Earnings • Aug 05First quarter 2022 earnings released: EPS ₹1.64 (vs ₹2.43 loss in 1Q 2021)The company reported a strong first quarter result with improved earnings, revenues and profit margins. First quarter 2022 results: Revenue: ₹228.5m (up 294% from 1Q 2021). Net income: ₹9.97m (up ₹24.7m from 1Q 2021). Profit margin: 4.4% (up from net loss in 1Q 2021). The move to profitability was driven by higher revenue. Over the last 3 years on average, earnings per share has increased by 14% per year whereas the company’s share price has increased by 17% per year.Valuation Update With 7 Day Price Move • Jul 16Investor sentiment improved over the past weekAfter last week's 18% share price gain to ₹71.30, the stock trades at a trailing P/E ratio of 34.1x. Average trailing P/E is 21x in the Chemicals industry in India. Total returns to shareholders of 85% over the past three years.Valuation Update With 7 Day Price Move • Jun 26Investor sentiment improved over the past weekAfter last week's 24% share price gain to ₹53.30, the stock trades at a trailing P/E ratio of 25.5x. Average trailing P/E is 21x in the Chemicals industry in India. Total returns to shareholders of 49% over the past three years.Reported Earnings • Jun 21Full year 2021 earnings released: EPS ₹2.09 (vs ₹3.82 in FY 2020)The company reported a soft full year result with weaker earnings and profit margins, although revenues improved. Full year 2021 results: Revenue: ₹897.1m (up 1.9% from FY 2020). Net income: ₹12.7m (down 45% from FY 2020). Profit margin: 1.4% (down from 2.6% in FY 2020). The decrease in margin was driven by higher expenses. Over the last 3 years on average, earnings per share has fallen by 2% per year whereas the company’s share price has increased by 3% per year.Valuation Update With 7 Day Price Move • Feb 23Investor sentiment improved over the past weekAfter last week's 18% share price gain to ₹35.00, the stock is trading at a trailing P/E ratio of 20.5x, up from the previous P/E ratio of 17.4x. This compares to an average P/E of 16x in the Chemicals industry in India. Total return to shareholders over the past three years is a loss of 14%.Is New 90 Day High Low • Feb 23New 90-day high: ₹35.00The company is up 23% from its price of ₹28.35 on 25 November 2020. The Indian market is up 16% over the last 90 days, indicating the company outperformed over that time. It also outperformed the Chemicals industry, which is up 11% over the same period.Is New 90 Day High Low • Feb 08New 90-day high: ₹31.45The company is up 20% from its price of ₹26.10 on 10 November 2020. The Indian market is up 21% over the last 90 days, indicating the company underperformed over that time. However, it outperformed the Chemicals industry, which is up 12% over the same period.Reported Earnings • Jan 30Third quarter 2021 earnings released: EPS ₹1.98 (vs ₹0.66 in 3Q 2020)The company reported a strong third quarter result with improved earnings, revenues and profit margins. Third quarter 2021 results: Revenue: ₹277.6m (up 48% from 3Q 2020). Net income: ₹12.0m (up 198% from 3Q 2020). Profit margin: 4.3% (up from 2.1% in 3Q 2020). The increase in margin was driven by higher revenue. Over the last 3 years on average, earnings per share has increased by 2% per year but the company’s share price has fallen by 12% per year, which means it is significantly lagging earnings.공시 • Jan 23National Plastic Technologies Limited to Report Q3, 2021 Results on Jan 29, 2021National Plastic Technologies Limited announced that they will report Q3, 2021 results on Jan 29, 2021Reported Earnings • Oct 26First half earnings releasedOver the last 12 months the company has reported total profits of ₹2.40m, down 89% from the prior year. Total revenue was ₹662.5m over the last 12 months, down 29% from the prior year.공시 • Oct 17National Plastic Technologies Limited to Report Q2, 2021 Results on Oct 23, 2020National Plastic Technologies Limited announced that they will report Q2, 2021 results on Oct 23, 2020공시 • Sep 04+ 2 more updatesNational Plastic Technologies Limited to Report Q4, 2021 Results on May 30, 2021National Plastic Technologies Limited announced that they will report Q4, 2021 results on May 30, 2021공시 • Aug 23National Plastic Technologies Limited to Report Q1, 2020 Results on Aug 28, 2020National Plastic Technologies Limited announced that they will report Q1, 2020 results on Aug 28, 2020지급의 안정성과 성장배당 데이터 가져오는 중안정적인 배당: 배당금 지급이 안정적인 반면, 531287 은(는) 배당금을 지급한 지 10년도 채 되지 않았습니다.배당금 증가: 531287 의 배당금 지급이 증가했지만 회사는 3 년 동안만 배당금을 지급했습니다.배당 수익률 vs 시장National Plastic Technologies 배당 수익률 vs 시장531287의 배당 수익률은 시장과 어떻게 비교되나요?구분배당 수익률회사 (531287)0.7%시장 하위 25% (IN)0.3%시장 상위 25% (IN)1.5%업계 평균 (Chemicals)0.8%분석가 예측 (531287) (최대 3년)n/a주목할만한 배당금: 531287 의 배당금( 0.74% )은 Indian 시장에서 배당금 지급자의 하위 25%( 0.3% )보다 높습니다.고배당: 531287 의 배당금( 0.74% )은 Indian 시장에서 배당금 지급자의 상위 25%( 1.47% )와 비교해 낮습니다.주주 대상 이익 배당수익 보장: 낮은 배당금 지급 비율 (9.9%)로 인해 531287의 배당금 지급은 수익으로 충분히 충당됩니다.주주 현금 배당현금 흐름 범위: 현금 지급 비율 ( 9.9% )이 낮기 때문에 531287 의 배당금 지급은 현금 흐름으로 완전히 충당됩니다.높은 배당을 제공하는 우량 기업 찾기7D1Y7D1Y7D1YIN 시장에서 배당이 강한 기업.View Management기업 분석 및 재무 데이터 상태데이터최종 업데이트 (UTC 시간)기업 분석2026/06/16 05:16종가2026/06/16 00:00수익2026/03/31연간 수익2026/03/31데이터 소스당사의 기업 분석에 사용되는 데이터는 S&P Global Market Intelligence LLC에서 제공됩니다. 아래 데이터는 이 보고서를 생성하기 위해 분석 모델에서 사용됩니다. 데이터는 정규화되므로 소스가 제공된 후 지연이 발생할 수 있습니다.패키지데이터기간미국 소스 예시 *기업 재무제표10년손익계산서현금흐름표대차대조표SEC 양식 10-KSEC 양식 10-Q분석가 컨센서스 추정치+3년재무 예측분석가 목표주가분석가 리서치 보고서Blue Matrix시장 가격30년주가배당, 분할 및 기타 조치ICE 시장 데이터SEC 양식 S-1지분 구조10년주요 주주내부자 거래SEC 양식 4SEC 양식 13D경영진10년리더십 팀이사회SEC 양식 10-KSEC 양식 DEF 14A주요 개발10년회사 공시SEC 양식 8-K* 미국 증권에 대한 예시이며, 비(非)미국 증권에는 해당 국가의 규제 서식 및 자료원을 사용합니다.별도로 명시되지 않는 한 모든 재무 데이터는 연간 기간을 기준으로 하지만 분기별로 업데이트됩니다. 이를 TTM(최근 12개월) 또는 LTM(지난 12개월) 데이터라고 합니다. 자세히 알아보기.분석 모델 및 스노우플레이크이 보고서를 생성하는 데 사용된 분석 모델에 대한 자세한 내용은 당사의 Github 페이지에서 확인하실 수 있습니다. 또한 보고서 활용 방법에 대한 가이드와 YouTube 튜토리얼도 제공합니다.Simply Wall St 분석 모델을 설계하고 구축한 세계적 수준의 팀에 대해 알아보세요.산업 및 섹터 지표산업 및 섹터 지표는 Simply Wall St가 6시간마다 계산하며, 프로세스에 대한 자세한 내용은 Github에서 확인할 수 있습니다.분석가 소스National Plastic Technologies Limited는 0명의 분석가가 다루고 있습니다. 이 중 0명의 분석가가 우리 보고서에 입력 데이터로 사용되는 매출 또는 수익 추정치를 제출했습니다. 분석가의 제출 자료는 하루 종일 업데이트됩니다.
Upcoming Dividend • Aug 28Upcoming dividend of ₹1.50 per shareEligible shareholders must have bought the stock before 04 September 2025. Payment date: 11 October 2025. Payout ratio is a comfortable 10% and this is well supported by cash flows. Trailing yield: 0.7%. Lower than top quartile of Indian dividend payers (1.3%). In line with average of industry peers (0.7%).
Declared Dividend • Jul 31Dividend increased to ₹1.50Dividend of ₹1.50 is 50% higher than last year. Ex-date: 4th September 2025 Payment date: 11th October 2025 Dividend yield will be 0.6%, which is lower than the industry average of 0.8%. Sustainability & Growth Dividend is well covered by both earnings (10% earnings payout ratio) and cash flows (18% cash payout ratio). The dividend has increased by an average of 22% per year over the past 2 years and payments have been stable during that time. Earnings per share has grown by 92% over the last 5 years. Unless this trend reverses, it should provide support to the dividend and adequate earnings cover.
공시 • Sep 18+ 1 more updateNational Plastic Technologies Limited Approves Final Dividend for the Financial Year Ended March 31, 2024National Plastic Technologies Limited announced that at its AGM held on September 17, 2024, the shareholders approved final dividend for the financial year ended March 31, 2024, amounting to INR 1 per equity share (10% of face value of INR 10 each).
Upcoming Dividend • Sep 03Upcoming dividend of ₹1.00 per shareEligible shareholders must have bought the stock before 10 September 2024. Payment date: 12 October 2024. Payout ratio is a comfortable 7.2% but the company is not cash flow positive. Trailing yield: 0.3%. Lower than top quartile of Indian dividend payers (1.1%). Lower than average of industry peers (0.6%).
Declared Dividend • Aug 02Dividend of ₹1.00 announcedDividend of ₹1.00 is the same as last year. Ex-date: 10th September 2024 Payment date: 17th October 2024 Dividend yield will be 0.2%, which is lower than the industry average of 0.8%. Sustainability & Growth Dividend is covered by earnings (7% earnings payout ratio) but the company has no free cash flows available, indicating it may be using cash reserves or debt to pay the dividend. The company is yet to establish a track record of dividend growth or stability as it hasn't paid a regular dividend for at least 2 years. Earnings per share has grown by 33% over the last 5 years. Unless this trend reverses, it should provide support to the dividend and adequate earnings cover.
공시 • May 17National Plastic Technologies Limited Recommends Final DividendNational Plastic Technologies Limited announced that at the board meeting held on May 15, 2024, the company recommended a final dividend of INR 1.00 per share (i.e.10 % on face value of INR 10 each), subject To Approve the shareholders of the company, which if approved, shall be paid/dispatched within thirty days from the conclusion of the Annual General Meeting of the Company. The Record date for the purpose of final dividend shall be intimated later.
Reported Earnings • May 27Full year 2026 earnings released: EPS: ₹15.09 (vs ₹14.85 in FY 2025)Full year 2026 results: EPS: ₹15.09 (up from ₹14.85 in FY 2025). Revenue: ₹3.41b (up 9.9% from FY 2025). Net income: ₹91.7m (up 1.6% from FY 2025). Profit margin: 2.7% (down from 2.9% in FY 2025). The decrease in margin was driven by higher expenses. Over the last 3 years on average, earnings per share has increased by 12% per year but the company’s share price has increased by 18% per year, which means it is tracking significantly ahead of earnings growth.
Reported Earnings • Feb 03Third quarter 2026 earnings released: EPS: ₹4.54 (vs ₹3.75 in 3Q 2025)Third quarter 2026 results: EPS: ₹4.54 (up from ₹3.75 in 3Q 2025). Revenue: ₹887.7m (up 12% from 3Q 2025). Net income: ₹27.6m (up 21% from 3Q 2025). Profit margin: 3.1% (up from 2.9% in 3Q 2025). The increase in margin was driven by higher revenue. Over the last 3 years on average, earnings per share has increased by 17% per year but the company’s share price has increased by 30% per year, which means it is tracking significantly ahead of earnings growth.
New Risk • Nov 21New minor risk - Share price stabilityThe company's share price has been volatile over the past 3 months. It is more volatile than 75% of Indian stocks, typically moving 6.9% a week. This is considered a minor risk. Share price volatility indicates the stock is highly sensitive to market conditions or economic conditions rather than being sensitive to its own business performance, which may also be inconsistent. It also increases the risk of potential losses in the short term as the stock tends to have larger drops in price more frequently than other stocks. Currently, the following risks have been identified for the company: Major Risk Debt is not well covered by operating cash flow (11% operating cash flow to total debt). Minor Risks Paying a dividend despite having no free cash flows. Share price has been volatile over the past 3 months (6.9% average weekly change). Market cap is less than US$100m (₹1.90b market cap, or US$21.2m).
Reported Earnings • Nov 02Second quarter 2026 earnings released: EPS: ₹4.45 (vs ₹4.17 in 2Q 2025)Second quarter 2026 results: EPS: ₹4.45 (up from ₹4.17 in 2Q 2025). Revenue: ₹888.8m (up 2.4% from 2Q 2025). Net income: ₹27.1m (up 6.8% from 2Q 2025). Profit margin: 3.0% (in line with 2Q 2025). Over the last 3 years on average, earnings per share has increased by 22% per year but the company’s share price has increased by 46% per year, which means it is tracking significantly ahead of earnings growth.
공시 • Oct 25National Plastic Technologies Limited to Report Q2, 2026 Results on Oct 31, 2025National Plastic Technologies Limited announced that they will report Q2, 2026 results at 9:15 AM, Indian Standard Time on Oct 31, 2025
Valuation Update With 7 Day Price Move • Sep 16Investor sentiment improves as stock rises 16%After last week's 16% share price gain to ₹280, the stock trades at a trailing P/E ratio of 18.6x. Average trailing P/E is 27x in the Chemicals industry in India. Total returns to shareholders of 250% over the past three years.
Upcoming Dividend • Aug 28Upcoming dividend of ₹1.50 per shareEligible shareholders must have bought the stock before 04 September 2025. Payment date: 11 October 2025. Payout ratio is a comfortable 10% and this is well supported by cash flows. Trailing yield: 0.7%. Lower than top quartile of Indian dividend payers (1.3%). In line with average of industry peers (0.7%).
공시 • Aug 18+ 2 more updatesNational Plastic Technologies Limited to Report Q4, 2026 Results on May 30, 2026National Plastic Technologies Limited announced that they will report Q4, 2026 results on May 30, 2026
Declared Dividend • Jul 31Dividend increased to ₹1.50Dividend of ₹1.50 is 50% higher than last year. Ex-date: 4th September 2025 Payment date: 11th October 2025 Dividend yield will be 0.6%, which is lower than the industry average of 0.8%. Sustainability & Growth Dividend is well covered by both earnings (10% earnings payout ratio) and cash flows (18% cash payout ratio). The dividend has increased by an average of 22% per year over the past 2 years and payments have been stable during that time. Earnings per share has grown by 92% over the last 5 years. Unless this trend reverses, it should provide support to the dividend and adequate earnings cover.
Reported Earnings • Jul 30First quarter 2026 earnings released: EPS: ₹3.66 (vs ₹3.43 in 1Q 2025)First quarter 2026 results: EPS: ₹3.66 (up from ₹3.43 in 1Q 2025). Revenue: ₹740.7m (up 7.9% from 1Q 2025). Net income: ₹22.2m (up 6.6% from 1Q 2025). Profit margin: 3.0% (in line with 1Q 2025). Over the last 3 years on average, earnings per share has increased by 26% per year but the company’s share price has increased by 54% per year, which means it is tracking significantly ahead of earnings growth.
공시 • Jul 29National Plastic Technologies Limited, Annual General Meeting, Sep 11, 2025National Plastic Technologies Limited, Annual General Meeting, Sep 11, 2025, at 10:30 Indian Standard Time. Location: the arihanth hall, madras hotel, ashoka, 47, pantheon rd., egmore, chennai - 600008, India
공시 • Jul 23National Plastic Technologies Limited to Report Q1, 2026 Results on Jul 29, 2025National Plastic Technologies Limited announced that they will report Q1, 2026 results on Jul 29, 2025
Valuation Update With 7 Day Price Move • Jun 25Investor sentiment improves as stock rises 16%After last week's 16% share price gain to ₹286, the stock trades at a trailing P/E ratio of 19.3x. Average trailing P/E is 28x in the Chemicals industry in India. Total returns to shareholders of 272% over the past three years.
New Risk • May 28New major risk - Financial positionThe company's debt is not well covered by operating cash flow. Operating cash flow to total debt ratio: 20% This is considered a major risk. If the company's operating cash flows are too small relative to the size of their debt, it increases their balance sheet risk. The company has less cash from operations to cover its expenses from servicing large debt and it increases the risk of liquidity issues. It also extends the time it would take for the company to pay back the debt in full, meaning it may not be able to easily pay it all off in a distress scenario. Currently, the following risks have been identified for the company: Major Risk Debt is not well covered by operating cash flow (20% operating cash flow to total debt). Minor Risk Market cap is less than US$100m (₹1.64b market cap, or US$19.1m).
Reported Earnings • May 28Full year 2025 earnings released: EPS: ₹14.85 (vs ₹13.85 in FY 2024)Full year 2025 results: EPS: ₹14.85 (up from ₹13.85 in FY 2024). Revenue: ₹3.11b (up 15% from FY 2024). Net income: ₹90.3m (up 7.3% from FY 2024). Profit margin: 2.9% (down from 3.1% in FY 2024). The decrease in margin was driven by higher expenses. Over the last 3 years on average, earnings per share has increased by 30% per year but the company’s share price has increased by 49% per year, which means it is tracking significantly ahead of earnings growth.
Valuation Update With 7 Day Price Move • Apr 24Investor sentiment improves as stock rises 18%After last week's 18% share price gain to ₹277, the stock trades at a trailing P/E ratio of 18.6x. Average trailing P/E is 25x in the Chemicals industry in India. Total returns to shareholders of 238% over the past three years.
Board Change • Feb 21Less than half of directors are independentFollowing the recent departure of a director, there are only 3 independent directors on the board. The company's board is composed of: 3 independent directors. 4 non-independent directors. Non-Executive Independent Director Deepa Ramani was the last independent director to join the board, commencing their role in 2024. The company's minority of independent directors is a risk according to the Simply Wall St Risk Model.
Reported Earnings • Jan 30Third quarter 2025 earnings released: EPS: ₹3.75 (vs ₹3.27 in 3Q 2024)Third quarter 2025 results: EPS: ₹3.75 (up from ₹3.27 in 3Q 2024). Revenue: ₹790.8m (up 22% from 3Q 2024). Net income: ₹22.8m (up 15% from 3Q 2024). Profit margin: 2.9% (down from 3.1% in 3Q 2024). The decrease in margin was driven by higher expenses. Over the last 3 years on average, earnings per share has increased by 31% per year but the company’s share price has increased by 54% per year, which means it is tracking significantly ahead of earnings growth.
New Risk • Dec 23New minor risk - Share price stabilityThe company's share price has been volatile over the past 3 months. It is more volatile than 75% of Indian stocks, typically moving 7.6% a week. This is considered a minor risk. Share price volatility indicates the stock is highly sensitive to market conditions or economic conditions rather than being sensitive to its own business performance, which may also be inconsistent. It also increases the risk of potential losses in the short term as the stock tends to have larger drops in price more frequently than other stocks. Currently, the following risks have been identified for the company: Minor Risks High level of debt (108% net debt to equity). Share price has been volatile over the past 3 months (7.6% average weekly change). Market cap is less than US$100m (₹2.97b market cap, or US$35.0m).
Valuation Update With 7 Day Price Move • Dec 18Investor sentiment improves as stock rises 22%After last week's 22% share price gain to ₹471, the stock trades at a trailing P/E ratio of 32.6x. Average trailing P/E is 32x in the Chemicals industry in India. Total returns to shareholders of 556% over the past three years.
Recent Insider Transactions • Nov 29Non-Executive Director recently bought ₹1.1m worth of stockOn the 21st of November, Manju Parakh bought around 3k shares on-market at roughly ₹392 per share. This transaction amounted to less than 1% of their direct individual holding at the time of the trade. This was the largest purchase by an insider in the last 3 months. Insiders have collectively bought ₹3.1m more in shares than they have sold in the last 12 months.
Reported Earnings • Oct 31Second quarter 2025 earnings released: EPS: ₹4.17 (vs ₹3.61 in 2Q 2024)Second quarter 2025 results: EPS: ₹4.17 (up from ₹3.61 in 2Q 2024). Revenue: ₹868.0m (up 18% from 2Q 2024). Net income: ₹25.4m (up 16% from 2Q 2024). Profit margin: 2.9% (in line with 2Q 2024). Over the last 3 years on average, earnings per share has increased by 30% per year but the company’s share price has increased by 74% per year, which means it is tracking significantly ahead of earnings growth.
공시 • Sep 18+ 1 more updateNational Plastic Technologies Limited Approves Final Dividend for the Financial Year Ended March 31, 2024National Plastic Technologies Limited announced that at its AGM held on September 17, 2024, the shareholders approved final dividend for the financial year ended March 31, 2024, amounting to INR 1 per equity share (10% of face value of INR 10 each).
Upcoming Dividend • Sep 03Upcoming dividend of ₹1.00 per shareEligible shareholders must have bought the stock before 10 September 2024. Payment date: 12 October 2024. Payout ratio is a comfortable 7.2% but the company is not cash flow positive. Trailing yield: 0.3%. Lower than top quartile of Indian dividend payers (1.1%). Lower than average of industry peers (0.6%).
공시 • Aug 24+ 2 more updatesNational Plastic Technologies Limited to Report Q4, 2025 Results on May 30, 2025National Plastic Technologies Limited announced that they will report Q4, 2025 results on May 30, 2025
Declared Dividend • Aug 02Dividend of ₹1.00 announcedDividend of ₹1.00 is the same as last year. Ex-date: 10th September 2024 Payment date: 17th October 2024 Dividend yield will be 0.2%, which is lower than the industry average of 0.8%. Sustainability & Growth Dividend is covered by earnings (7% earnings payout ratio) but the company has no free cash flows available, indicating it may be using cash reserves or debt to pay the dividend. The company is yet to establish a track record of dividend growth or stability as it hasn't paid a regular dividend for at least 2 years. Earnings per share has grown by 33% over the last 5 years. Unless this trend reverses, it should provide support to the dividend and adequate earnings cover.
New Risk • Aug 01New major risk - Financial positionThe company's debt is not well covered by operating cash flow. Operating cash flow to total debt ratio: 19% This is considered a major risk. If the company's operating cash flows are too small relative to the size of their debt, it increases their balance sheet risk. The company has less cash from operations to cover its expenses from servicing large debt and it increases the risk of liquidity issues. It also extends the time it would take for the company to pay back the debt in full, meaning it may not be able to easily pay it all off in a distress scenario. Currently, the following risks have been identified for the company: Major Risk Debt is not well covered by operating cash flow (19% operating cash flow to total debt). Minor Risks Paying a dividend despite having no free cash flows. Market cap is less than US$100m (₹2.44b market cap, or US$29.1m).
공시 • Jul 31National Plastic Technologies Limited, Annual General Meeting, Sep 17, 2024National Plastic Technologies Limited, Annual General Meeting, Sep 17, 2024, at 10:35 Indian Standard Time. Location: arihant hall, madras hotel ashoka, 47, pantheon road, egmore- 600008, chennai India
Reported Earnings • Jul 31First quarter 2025 earnings released: EPS: ₹3.43 (vs ₹3.39 in 1Q 2024)First quarter 2025 results: EPS: ₹3.43 (up from ₹3.39 in 1Q 2024). Revenue: ₹686.8m (up 12% from 1Q 2024). Net income: ₹20.9m (up 1.2% from 1Q 2024). Profit margin: 3.0% (down from 3.4% in 1Q 2024). The decrease in margin was driven by higher expenses. Over the last 3 years on average, earnings per share has increased by 31% per year but the company’s share price has increased by 87% per year, which means it is tracking significantly ahead of earnings growth.
공시 • Jul 23National Plastic Technologies Limited to Report Q1, 2025 Results on Jul 30, 2024National Plastic Technologies Limited announced that they will report Q1, 2025 results on Jul 30, 2024
Valuation Update With 7 Day Price Move • Jul 22Investor sentiment improves as stock rises 16%After last week's 16% share price gain to ₹454, the stock trades at a trailing P/E ratio of 32.8x. Average trailing P/E is 35x in the Chemicals industry in India. Total returns to shareholders of 566% over the past three years.
Reported Earnings • May 17Full year 2024 earnings released: EPS: ₹13.85 (vs ₹10.12 in FY 2023)Full year 2024 results: EPS: ₹13.85 (up from ₹10.12 in FY 2023). Revenue: ₹2.69b (up 28% from FY 2023). Net income: ₹84.2m (up 37% from FY 2023). Profit margin: 3.1% (up from 2.9% in FY 2023). The increase in margin was driven by higher revenue. Over the last 3 years on average, earnings per share has increased by 38% per year but the company’s share price has increased by 113% per year, which means it is tracking significantly ahead of earnings growth.
공시 • May 17National Plastic Technologies Limited Recommends Final DividendNational Plastic Technologies Limited announced that at the board meeting held on May 15, 2024, the company recommended a final dividend of INR 1.00 per share (i.e.10 % on face value of INR 10 each), subject To Approve the shareholders of the company, which if approved, shall be paid/dispatched within thirty days from the conclusion of the Annual General Meeting of the Company. The Record date for the purpose of final dividend shall be intimated later.
Valuation Update With 7 Day Price Move • Mar 01Investor sentiment improves as stock rises 32%After last week's 32% share price gain to ₹426, the stock trades at a trailing P/E ratio of 32.2x. Average trailing P/E is 30x in the Chemicals industry in India. Total returns to shareholders of 1,061% over the past three years.
Valuation Update With 7 Day Price Move • Feb 14Investor sentiment deteriorates as stock falls 16%After last week's 16% share price decline to ₹305, the stock trades at a trailing P/E ratio of 23x. Average trailing P/E is 29x in the Chemicals industry in India. Total returns to shareholders of 967% over the past three years.
New Risk • Feb 09New minor risk - Share price stabilityThe company's share price has been volatile over the past 3 months. It is more volatile than 75% of Indian stocks, typically moving 7.9% a week. This is considered a minor risk. Share price volatility indicates the stock is highly sensitive to market conditions or economic conditions rather than being sensitive to its own business performance, which may also be inconsistent. It also increases the risk of potential losses in the short term as the stock tends to have larger drops in price more frequently than other stocks. Currently, the following risks have been identified for the company: Minor Risks High level of debt (190% net debt to equity). Short dividend paying track record (1 year of continuous dividend payments). Share price has been volatile over the past 3 months (7.9% average weekly change). Market cap is less than US$100m (₹1.86b market cap, or US$22.4m).
Reported Earnings • Jan 31Third quarter 2024 earnings releasedThird quarter 2024 results: Revenue: ₹650.6m (up 18% from 3Q 2023). Net income: ₹19.9m (up 24% from 3Q 2023). Profit margin: 3.1% (up from 2.9% in 3Q 2023). The increase in margin was driven by higher revenue.
공시 • Jan 24National Plastic Technologies Limited to Report Q3, 2024 Results on Jan 30, 2024National Plastic Technologies Limited announced that they will report Q3, 2024 results on Jan 30, 2024
Recent Insider Transactions • Jan 02Non-Executive Director recently bought ₹1.0m worth of stockOn the 28th of December, Manju Parakh bought around 3k shares on-market at roughly ₹398 per share. This transaction amounted to less than 1% of their direct individual holding at the time of the trade. In the last 3 months, they made an even bigger purchase worth ₹1.1m. Insiders have collectively bought ₹3.2m more in shares than they have sold in the last 12 months.
Recent Insider Transactions • Dec 27Non-Executive Director recently bought ₹1.1m worth of stockOn the 22nd of December, Manju Parakh bought around 3k shares on-market at roughly ₹369 per share. This transaction amounted to less than 1% of their direct individual holding at the time of the trade. This was the largest purchase by an insider in the last 3 months. Insiders have collectively bought ₹2.2m more in shares than they have sold in the last 12 months.
New Risk • Nov 10New major risk - Financial positionThe company's interest payments are not well covered by earnings. Net interest cover: 2.9x This is considered a major risk. If the company is unable to fund interest repayments on its debt through profits, it may be forced into reducing its debt burden through selling assets, undertaking a potentially costly capital raising or even into bankruptcy in the worst case scenario. Currently, the following risks have been identified for the company: Major Risk Interest payments are not well covered by earnings (2.9x net interest cover). Minor Risk Market cap is less than US$100m (₹1.92b market cap, or US$23.1m).
Valuation Update With 7 Day Price Move • Nov 07Investor sentiment improves as stock rises 20%After last week's 20% share price gain to ₹304, the stock trades at a trailing P/E ratio of 24.1x. Average trailing P/E is 27x in the Chemicals industry in India. Total returns to shareholders of 1,071% over the past three years.
Reported Earnings • Nov 02Second quarter 2024 earnings released: EPS: ₹3.61 (vs ₹2.13 in 2Q 2023)Second quarter 2024 results: EPS: ₹3.61 (up from ₹2.13 in 2Q 2023). Revenue: ₹735.3m (up 31% from 2Q 2023). Net income: ₹21.9m (up 69% from 2Q 2023). Profit margin: 3.0% (up from 2.3% in 2Q 2023). The increase in margin was driven by higher revenue. Over the last 3 years on average, earnings per share has increased by 51% per year but the company’s share price has increased by 121% per year, which means it is tracking significantly ahead of earnings growth.
공시 • Oct 26National Plastic Technologies Limited to Report Q2, 2024 Results on Oct 31, 2023National Plastic Technologies Limited announced that they will report Q2, 2024 results at 3:30 PM, Indian Standard Time on Oct 31, 2023
공시 • Sep 14National Plastic Technologies Limited Approves Final Divided for the Financial Year Ended March 31, 2023National Plastic Technologies Limited approved final divided of INR 1 per equity share for the financial year ended March 31, 2023 at the Annual General Meeting held on September 13, 2023.
Upcoming Dividend • Aug 30Upcoming dividend of ₹1.00 per share at 0.5% yieldEligible shareholders must have bought the stock before 06 September 2023. Payment date: 13 October 2023. Trailing yield: 0.5%. Lower than top quartile of Indian dividend payers (1.4%). Lower than average of industry peers (0.8%).
공시 • Jul 28National Plastic Technologies Limited, Annual General Meeting, Sep 13, 2023National Plastic Technologies Limited, Annual General Meeting, Sep 13, 2023, at 10:30 Indian Standard Time. Location: Hall of Ragaas, 47, First Avenue, Sastri Nagar, Adyar Chennai India
공시 • Jul 27National Plastic Technologies Limited Proposes Final Dividend for the Year Ended on March 31, 2023National Plastic Technologies Limited announced that the record date for determining entitlement of members to the final dividend of INR 1 per share for the financial year ended on March 31, 2023, if approved at the AGM to be held on 13 September 2023 is fixed as 6 September, 2023 and shall be paid within 30 days from the declaration and in any case not later than October 11, 2023.
Reported Earnings • Jul 27First quarter 2024 earnings released: EPS: ₹3.39 (vs ₹2.39 in 1Q 2023)First quarter 2024 results: EPS: ₹3.39 (up from ₹2.39 in 1Q 2023). Revenue: ₹614.5m (up 35% from 1Q 2023). Net income: ₹20.6m (up 42% from 1Q 2023). Profit margin: 3.4% (up from 3.2% in 1Q 2023). The increase in margin was driven by higher revenue. Over the last 3 years on average, earnings per share has increased by 57% per year but the company’s share price has increased by 63% per year, which means it is tracking significantly ahead of earnings growth.
Recent Insider Transactions • Jun 29Non-Executive Director recently bought ₹1.1m worth of stockOn the 27th of June, Manju Parakh bought around 8k shares on-market at roughly ₹145 per share. This transaction amounted to 1.4% of their direct individual holding at the time of the trade. This was the largest purchase by an insider in the last 3 months. This was the only on-market transaction from insiders over the last 12 months.
Valuation Update With 7 Day Price Move • Jun 23Investor sentiment improves as stock rises 15%After last week's 15% share price gain to ₹145, the stock trades at a trailing P/E ratio of 14.3x. Average trailing P/E is 22x in the Chemicals industry in India. Total returns to shareholders of 292% over the past three years.
Reported Earnings • May 13Full year 2023 earnings released: EPS: ₹10.12 (vs ₹5.98 in FY 2022)Full year 2023 results: EPS: ₹10.12 (up from ₹5.98 in FY 2022). Revenue: ₹2.10b (up 57% from FY 2022). Net income: ₹61.5m (up 69% from FY 2022). Profit margin: 2.9% (up from 2.7% in FY 2022). The increase in margin was driven by higher revenue. Over the last 3 years on average, earnings per share has increased by 52% per year but the company’s share price has increased by 64% per year, which means it is tracking significantly ahead of earnings growth.
공시 • May 13National Plastic Technologies Limited Recommends Final DividendNational Plastic Technologies Limited at its board meeting held on May 11, 2023 recommended final dividend of INR 1.00 per share subject To Approve the shareholders of the company, which if approved, shall be paid/dispatched within thirty days from the conclusion of the Annual General Meeting of the Company. The Record date for the purpose of final dividend shall be intimated later.
Valuation Update With 7 Day Price Move • May 12Investor sentiment improves as stock rises 22%After last week's 22% share price gain to ₹130, the stock trades at a trailing P/E ratio of 17.3x. Average trailing P/E is 20x in the Chemicals industry in India. Total returns to shareholders of 340% over the past three years.
Valuation Update With 7 Day Price Move • Apr 21Investor sentiment improves as stock rises 16%After last week's 16% share price gain to ₹107, the stock trades at a trailing P/E ratio of 14.3x. Average trailing P/E is 20x in the Chemicals industry in India. Total returns to shareholders of 265% over the past three years.
Reported Earnings • Feb 09Third quarter 2023 earnings released: EPS: ₹2.63 (vs ₹1.71 in 3Q 2022)Third quarter 2023 results: EPS: ₹2.63 (up from ₹1.71 in 3Q 2022). Revenue: ₹552.3m (up 71% from 3Q 2022). Net income: ₹16.0m (up 54% from 3Q 2022). Profit margin: 2.9% (down from 3.2% in 3Q 2022). The decrease in margin was driven by higher expenses. Over the last 3 years on average, earnings per share has increased by 46% per year whereas the company’s share price has increased by 47% per year.
공시 • Feb 09National Plastic Technologies Limited Announces Resignation of Venkatesan N as Additional DirectorNational Plastic Technologies Limited informed that the Mr. Venkatesan N, has resigned as Additional Director from the Board of Directors of the Company effective from February 09, 2023.
Valuation Update With 7 Day Price Move • Dec 30Investor sentiment improved over the past weekAfter last week's 19% share price gain to ₹124, the stock trades at a trailing P/E ratio of 18.9x. Average trailing P/E is 20x in the Chemicals industry in India. Total returns to shareholders of 256% over the past three years.
Valuation Update With 7 Day Price Move • Dec 15Investor sentiment improved over the past weekAfter last week's 20% share price gain to ₹124, the stock trades at a trailing P/E ratio of 18.9x. Average trailing P/E is 21x in the Chemicals industry in India. Total returns to shareholders of 273% over the past three years.
Valuation Update With 7 Day Price Move • Nov 30Investor sentiment improved over the past weekAfter last week's 26% share price gain to ₹108, the stock trades at a trailing P/E ratio of 16.5x. Average trailing P/E is 20x in the Chemicals industry in India. Total returns to shareholders of 208% over the past three years.
Board Change • Nov 16Less than half of directors are independentFollowing the recent departure of a director, there are only 2 independent directors on the board. The company's board is composed of: 2 independent directors. 4 non-independent directors. Non-Executive Independent Director Ajit Chordia was the last independent director to join the board, commencing their role in 2010. The company's minority of independent directors is a risk according to the Simply Wall St Risk Model.
공시 • Nov 11National Plastic Technologies Limited Appoints Venkatesan N as Additional Director (Whole Time Director)National Plastic Technologies Limited announced that the Mr. Venkatesan N, has been appointed as Additional Director in the capacity of Whole time Director for a period of 3 years, with effect from 10 November 2022. Mr. Venkatesan is a Mechanical Engineer having an experience of about 32 years in Manufacturing Industry with focus on Plastic Injection Molding. He joined the Group in the year 1998 as a Production Manager and is currently the Vice President Operations of its group. He is overseeing the operations of all the Company's Plants.
공시 • Sep 23National Plastic Technologies Limited Reappoints Mr. Alok Parakh as Joint Managing Director, Effective September 30, 2022National Plastic Technologies Limited announced that the Mr. Alok Parakh, Joint Managing Director has expressed his desire not to be reappointed as Joint Managing Director on expiry of his term on September 30, 2022 due to his pre-occupation as a Managing Director in National Polyplast (India) Pvt Ltd. Accordingly, he has resigned from the Directorship of the Company with effect from October 1, 2022. Hence, He will cease lo be a Director of the company with effect from October 1, 2022.
공시 • Aug 31+ 2 more updatesNational Plastic Technologies Limited to Report Q2, 2023 Results on Nov 14, 2022National Plastic Technologies Limited announced that they will report Q2, 2023 results on Nov 14, 2022
공시 • Aug 19National Plastic Technologies Limited, Annual General Meeting, Sep 22, 2022National Plastic Technologies Limited, Annual General Meeting, Sep 22, 2022, at 10:30 Indian Standard Time. Location: at the Hall of Ragaas, No.2, Sastri Nagar, Adyar, Chennai India
Reported Earnings • Aug 15First quarter 2023 earnings released: EPS: ₹2.39 (vs ₹1.64 in 1Q 2022)First quarter 2023 results: EPS: ₹2.39 (up from ₹1.64 in 1Q 2022). Revenue: ₹454.5m (up 100% from 1Q 2022). Net income: ₹14.6m (up 46% from 1Q 2022). Profit margin: 3.2% (down from 4.4% in 1Q 2022). The decrease in margin was driven by higher expenses. Over the last 3 years on average, earnings per share has increased by 38% per year but the company’s share price has only increased by 28% per year, which means it is significantly lagging earnings growth.
공시 • Aug 03National Plastic Technologies Limited to Report Q1, 2023 Results on Aug 09, 2022National Plastic Technologies Limited announced that they will report Q1, 2023 results on Aug 09, 2022
Board Change • Apr 27Less than half of directors are independentNo new directors have joined the board in the last 3 years. The company's board is composed of: No new directors. 3 experienced directors. 3 highly experienced directors. 2 independent directors (4 non-independent directors). Non-Executive Independent Director Ajit Chordia was the last independent director to join the board, commencing their role in 2010. The following issues are considered to be risks according to the Simply Wall St Risk Model: Minority of independent directors. Insufficient board refreshment.
Valuation Update With 7 Day Price Move • Mar 24Investor sentiment improved over the past weekAfter last week's 16% share price gain to ₹90.25, the stock trades at a trailing P/E ratio of 12.2x. Average trailing P/E is 19x in the Chemicals industry in India. Total returns to shareholders of 162% over the past three years.
Reported Earnings • Feb 08Third quarter 2022 earnings: Revenues and EPS in line with analyst expectationsThird quarter 2022 results: EPS: ₹1.71 (down from ₹1.98 in 3Q 2021). Revenue: ₹323.2m (up 17% from 3Q 2021). Net income: ₹10.4m (down 14% from 3Q 2021). Profit margin: 3.2% (down from 4.4% in 3Q 2021). The decrease in margin was driven by higher expenses. Revenue was in line with analyst estimates. Over the last 3 years on average, earnings per share has increased by 24% per year but the company’s share price has increased by 31% per year, which means it is tracking significantly ahead of earnings growth.
Valuation Update With 7 Day Price Move • Dec 28Investor sentiment improved over the past weekAfter last week's 19% share price gain to ₹85.30, the stock trades at a trailing P/E ratio of 13.9x. Average trailing P/E is 18x in the Chemicals industry in India. Total returns to shareholders of 162% over the past three years.
Valuation Update With 7 Day Price Move • Sep 24Investor sentiment improved over the past weekAfter last week's 15% share price gain to ₹73.90, the stock trades at a trailing P/E ratio of 12x. Average trailing P/E is 19x in the Chemicals industry in India. Total returns to shareholders of 97% over the past three years.
Valuation Update With 7 Day Price Move • Aug 30Investor sentiment improved over the past weekAfter last week's 15% share price gain to ₹66.90, the stock trades at a trailing P/E ratio of 10.9x. Average trailing P/E is 17x in the Chemicals industry in India. Total returns to shareholders of 81% over the past three years.
Reported Earnings • Aug 05First quarter 2022 earnings released: EPS ₹1.64 (vs ₹2.43 loss in 1Q 2021)The company reported a strong first quarter result with improved earnings, revenues and profit margins. First quarter 2022 results: Revenue: ₹228.5m (up 294% from 1Q 2021). Net income: ₹9.97m (up ₹24.7m from 1Q 2021). Profit margin: 4.4% (up from net loss in 1Q 2021). The move to profitability was driven by higher revenue. Over the last 3 years on average, earnings per share has increased by 14% per year whereas the company’s share price has increased by 17% per year.
Valuation Update With 7 Day Price Move • Jul 16Investor sentiment improved over the past weekAfter last week's 18% share price gain to ₹71.30, the stock trades at a trailing P/E ratio of 34.1x. Average trailing P/E is 21x in the Chemicals industry in India. Total returns to shareholders of 85% over the past three years.
Valuation Update With 7 Day Price Move • Jun 26Investor sentiment improved over the past weekAfter last week's 24% share price gain to ₹53.30, the stock trades at a trailing P/E ratio of 25.5x. Average trailing P/E is 21x in the Chemicals industry in India. Total returns to shareholders of 49% over the past three years.
Reported Earnings • Jun 21Full year 2021 earnings released: EPS ₹2.09 (vs ₹3.82 in FY 2020)The company reported a soft full year result with weaker earnings and profit margins, although revenues improved. Full year 2021 results: Revenue: ₹897.1m (up 1.9% from FY 2020). Net income: ₹12.7m (down 45% from FY 2020). Profit margin: 1.4% (down from 2.6% in FY 2020). The decrease in margin was driven by higher expenses. Over the last 3 years on average, earnings per share has fallen by 2% per year whereas the company’s share price has increased by 3% per year.
Valuation Update With 7 Day Price Move • Feb 23Investor sentiment improved over the past weekAfter last week's 18% share price gain to ₹35.00, the stock is trading at a trailing P/E ratio of 20.5x, up from the previous P/E ratio of 17.4x. This compares to an average P/E of 16x in the Chemicals industry in India. Total return to shareholders over the past three years is a loss of 14%.
Is New 90 Day High Low • Feb 23New 90-day high: ₹35.00The company is up 23% from its price of ₹28.35 on 25 November 2020. The Indian market is up 16% over the last 90 days, indicating the company outperformed over that time. It also outperformed the Chemicals industry, which is up 11% over the same period.
Is New 90 Day High Low • Feb 08New 90-day high: ₹31.45The company is up 20% from its price of ₹26.10 on 10 November 2020. The Indian market is up 21% over the last 90 days, indicating the company underperformed over that time. However, it outperformed the Chemicals industry, which is up 12% over the same period.
Reported Earnings • Jan 30Third quarter 2021 earnings released: EPS ₹1.98 (vs ₹0.66 in 3Q 2020)The company reported a strong third quarter result with improved earnings, revenues and profit margins. Third quarter 2021 results: Revenue: ₹277.6m (up 48% from 3Q 2020). Net income: ₹12.0m (up 198% from 3Q 2020). Profit margin: 4.3% (up from 2.1% in 3Q 2020). The increase in margin was driven by higher revenue. Over the last 3 years on average, earnings per share has increased by 2% per year but the company’s share price has fallen by 12% per year, which means it is significantly lagging earnings.
공시 • Jan 23National Plastic Technologies Limited to Report Q3, 2021 Results on Jan 29, 2021National Plastic Technologies Limited announced that they will report Q3, 2021 results on Jan 29, 2021
Reported Earnings • Oct 26First half earnings releasedOver the last 12 months the company has reported total profits of ₹2.40m, down 89% from the prior year. Total revenue was ₹662.5m over the last 12 months, down 29% from the prior year.
공시 • Oct 17National Plastic Technologies Limited to Report Q2, 2021 Results on Oct 23, 2020National Plastic Technologies Limited announced that they will report Q2, 2021 results on Oct 23, 2020
공시 • Sep 04+ 2 more updatesNational Plastic Technologies Limited to Report Q4, 2021 Results on May 30, 2021National Plastic Technologies Limited announced that they will report Q4, 2021 results on May 30, 2021
공시 • Aug 23National Plastic Technologies Limited to Report Q1, 2020 Results on Aug 28, 2020National Plastic Technologies Limited announced that they will report Q1, 2020 results on Aug 28, 2020