View Future GrowthGetty Copper 과거 순이익 실적과거 기준 점검 0/6Getty Copper의 수입은 연평균 -71.1%의 비율로 감소해 온 반면, Metals and Mining 산업의 수입은 연간 2% 감소했습니다.핵심 정보-71.11%순이익 성장률n/a주당순이익(EPS) 성장률Metals and Mining 산업 성장률29.18%매출 성장률n/a자기자본이익률-18.70%순이익률n/a최근 순이익 업데이트31 Dec 2025최근 과거 실적 업데이트업데이트 없음모든 업데이트 보기Recent updates공시 • 3hGetty Copper Inc. Reports First Assay Results from 2026 Exploration Program At Getty ProjectGetty Copper Inc. has provided first assay results from its 2026 exploration program at the Getty Project in the Highland Valley District. The results from the three drill holes reported here are the first from the current program, which is designed to support a future resource estimate and potentially expand the Getty North porphyry copper deposit. Getty plans to complete up to 16,000 metres of drilling on resource and exploration targets in its 2026 program. A total of 14 holes have been completed at Getty North to date and results from the first three holes are reported here: GN26-01 (Resource confirmation): 342m of 0.50% Cu, 87 ppm Mo and 0.8 g/t Ag from 9m depth (oxide to 39m) including 108m of 0.70% Cu, 90 ppm Mo and 1.0 g/t Ag from 12m and including 135m of 0.55% Cu, 132 ppm Mo and 1.0 g/t Ag from 186m. GN26-03 (Expansion): 170.8m of 0.24% Cu, 50 ppm Mo and 0.3 g/t Ag from 408.2m downhole (~300m below surface) including 45.9m of 0.40% Cu, 133 ppm Mo and 0.4 g/t Ag from 408.2m. GN26-04 (Resource confirmation): 278m of 0.38% Cu, 46 ppm Mo and 0.4 g/t Ag from 22m depth including 150m of 0.51% Cu, 58 ppm Mo and 0.5 g/t Ag from 66m. The drill holes encountered copper mineralization occurring predominantly as sulfides, mainly chalcopyrite with local bornite, in vein stockworks and sheeted vein zones and disseminations associated with a multiphase porphyry intrusion, consistent with historical logs and the Company's relogging work. GN26-01 encountered a short interval of oxidized copper mineralization near surface, to be more fully characterized by ongoing sequential leach assaying. Comparable mineralization was encountered in GN26-02; however, final QA/QC review for that hole is pending so it is not reported in this release. Holes GN26-01 and GN26-04 are the first of a planned eight resource confirmation holes. They drill down the plunge of the deposit to collect a multi-element assay suite with a full QA/QC protocol that will be used to upgrade the historic resource estimate to a modern standard. The holes intersected grades and widths that are consistent with expectations, based on grade models generated from historical drill hole data. The Getty North deposit is approximately 350 metres wide east-west and 500 metres wide north-south and remains open down plunge. True width of mineralization in the drill holes will be determined once geological modelling is completed but at present is not known. GN26-03 is an expansion hole that was drilled as a >65m down-plunge step-out beneath historical drilling and indicates the continuation of mineralization at depth which remains open. The relatively sharp increase in grade marking the start of the intercept in this hole occurs at a fault, highlighting the potential to identify fault-offset mineralization nearby. Similarly, the relatively sharp decreases in grade at depth in GN26-01 and GN26-04 are interpreted to be in part fault-related and occur southeast of the cross section line. Drilling is ongoing to complete an updated geological model and fully characterize the geometry and structural controls of mineralization. An additional 11 holes for a total of 7,377m have been completed at Getty North to date. Assay results and/or QA/QC review are pending for these holes, and sampling remains ongoing for some. Drilling is also ongoing at Getty South. Reported intervals represent drilled widths and not true widths. Drill holes were sampled at continuous 3m intervals, though samples are shorter to accommodate geological boundaries. Samples were halved by core saw on site, with one half sent to ALS Laboratories in Kamloops or North Vancouver for preparation and pulps were assayed in North Vancouver. Samples were prepared and assayed following ALS method codes: PREP-31, ME-MS61, and Au-ICP21. Selected samples were also assayed by sequential leach package Cu-PKG06LI, for which a split of the pulp was analyzed at ALS Laboratories in Lima, Peru. The Company followed a QA/QC program involving the use of blanks, standards and duplicates.공시 • May 27Getty Copper Provides Update on Drill Target Identified At Getty SouthGetty Copper Inc. had completed a compilation and review of historical drilling data at Getty South. The database includes mainly drill holes completed in the 1970s and earlier, many of which were only partially sampled with no geological logs and uncertain locations. The review also included relogging of 13 drill holes completed in 1996 totaling 2,579 metres, all of which were fully sampled and assayed. This drilling data, combined with information from trenching and geological mapping shows that discrete breccia-hosted higher grade copper zones within Getty South have been only partly defined. One of the most significant of these is the Trojan Zone, which includes the historical Trojan Mine. Reported historical drill intercepts include: 1.3% Cu over 23.2 m from 1.2 m depth in U-4; 0.9% Cu over 12.2 m from 13.7 m depth in U-5; 1.1% Cu over 9.1 m from 18.3 m depth in U-6; 1.7% Cu over 25 m from 18.3 m depth in U-9; 0.63% Cu over 20 m from 52.5 m depth in GS96-06; 0.8% Cu over 8.8 m from 72.8 m depth in U-1; 0.8% Cu over 39 m from 72.9 m depth in U-3 (The deepest intersection to date, 125m vertically below surface; hole collared underground). Notably, the Trojan Zone is partly coincident with an IP chargeability anomaly which strengthens at depth beneath historical drilling. IP anomalies indicate the presence of disseminated sulfide mineralization, which is very encouraging as chalcopyrite is by far the most abundant sulfide mineral encountered in drilling at Getty South. This anomaly and others across the property have been better defined by 3D inversions of historical geophysical data completed as part of the Company's ongoing district-scale exploration targeting work. The Trojan Zone will be the initial target of the planned drill program at Getty South. Planned drill holes ranging from 150 to 500 metres are designed to determine the geometry, grade, and mineralogy of extensions to the near-surface high-grade zones, while also testing geophysical anomalies located down-plunge of the high-grade breccia zones. The anomaly is considered prospective, as elevated IP chargeability indicates the presence of sulfides. Reported here for the first time based on data relied on for the non-current report Parkinson, C.L. and Fayram, T.S., 2009, National Instrument 43-101 Preliminary Feasibility Study Technical Report of the Getty Copper Project. The Company has not yet been able to verify the details of all historical drill holes at Getty South. The technical information contained in this news release has been reviewed and approved by Roy Greig, Ph.D., P.Geo., who is a Qualified Person as defined in "National Instrument 43-101 - Standards of Disclosure for Mineral Projects" and who is an officer of the Company - Vice President of Exploration.매출 및 비용 세부 내역Getty Copper가 돈을 벌고 사용하는 방법. 최근 발표된 LTM 실적 기준.순이익 및 매출 추이DB:UK9 매출, 비용 및 순이익 (CAD Millions)날짜매출순이익일반관리비연구개발비31 Dec 250-110양질의 수익: UK9 은(는) 현재 수익성이 없습니다.이익 마진 증가: UK9는 현재 수익성이 없습니다.잉여현금흐름 대비 순이익 분석과거 순이익 성장 분석수익추이: UK9은 상장된 지 3년이 되지 않아 지난 5년간 전년 대비 수익 증가율이 긍정적인지 확인할 수 없습니다.성장 가속화: 현재 수익성이 없어 지난 1년간 UK9의 수익 성장률을 5년 평균과 비교할 수 없습니다.수익 대 산업: UK9은 수익성이 없어 지난 해 수익 성장률을 Metals and Mining 업계(29.7%)와 비교하기 어렵습니다.자기자본이익률높은 ROE: UK9는 현재 수익성이 없으므로 자본 수익률이 음수(-18.7%)입니다.총자산이익률투하자본수익률우수한 과거 실적 기업을 찾아보세요7D1Y7D1Y7D1YMaterials 산업에서 과거 실적이 우수한 기업.View Financial Health기업 분석 및 재무 데이터 상태데이터최종 업데이트 (UTC 시간)기업 분석2026/06/17 03:13종가2026/06/17 00:00수익2025/12/31연간 수익2025/12/31데이터 소스당사의 기업 분석에 사용되는 데이터는 S&P Global Market Intelligence LLC에서 제공됩니다. 아래 데이터는 이 보고서를 생성하기 위해 분석 모델에서 사용됩니다. 데이터는 정규화되므로 소스가 제공된 후 지연이 발생할 수 있습니다.패키지데이터기간미국 소스 예시 *기업 재무제표10년손익계산서현금흐름표대차대조표SEC 양식 10-KSEC 양식 10-Q분석가 컨센서스 추정치+3년재무 예측분석가 목표주가분석가 리서치 보고서Blue Matrix시장 가격30년주가배당, 분할 및 기타 조치ICE 시장 데이터SEC 양식 S-1지분 구조10년주요 주주내부자 거래SEC 양식 4SEC 양식 13D경영진10년리더십 팀이사회SEC 양식 10-KSEC 양식 DEF 14A주요 개발10년회사 공시SEC 양식 8-K* 미국 증권에 대한 예시이며, 비(非)미국 증권에는 해당 국가의 규제 서식 및 자료원을 사용합니다.별도로 명시되지 않는 한 모든 재무 데이터는 연간 기간을 기준으로 하지만 분기별로 업데이트됩니다. 이를 TTM(최근 12개월) 또는 LTM(지난 12개월) 데이터라고 합니다. 자세히 알아보기.분석 모델 및 스노우플레이크이 보고서를 생성하는 데 사용된 분석 모델에 대한 세부 정보는 당사의 Github 페이지에서 확인하실 수 있으며, 보고서 활용 방법에 대한 가이드와 YouTube 튜토리얼도 제공하고 있습니다.Simply Wall St 분석 모델을 설계하고 구축한 세계적 수준의 팀에 대해 알아보세요.산업 및 섹터 지표산업 및 섹터 지표는 Simply Wall St가 6시간마다 계산하며, 프로세스에 대한 자세한 내용은 Github에서 확인할 수 있습니다.분석가 소스Getty Copper Inc.는 0명의 분석가가 다루고 있습니다. 이 중 0명의 분석가가 우리 보고서에 입력 데이터로 사용되는 매출 또는 수익 추정치를 제출했습니다. 분석가의 제출 자료는 하루 종일 업데이트됩니다.
공시 • 3hGetty Copper Inc. Reports First Assay Results from 2026 Exploration Program At Getty ProjectGetty Copper Inc. has provided first assay results from its 2026 exploration program at the Getty Project in the Highland Valley District. The results from the three drill holes reported here are the first from the current program, which is designed to support a future resource estimate and potentially expand the Getty North porphyry copper deposit. Getty plans to complete up to 16,000 metres of drilling on resource and exploration targets in its 2026 program. A total of 14 holes have been completed at Getty North to date and results from the first three holes are reported here: GN26-01 (Resource confirmation): 342m of 0.50% Cu, 87 ppm Mo and 0.8 g/t Ag from 9m depth (oxide to 39m) including 108m of 0.70% Cu, 90 ppm Mo and 1.0 g/t Ag from 12m and including 135m of 0.55% Cu, 132 ppm Mo and 1.0 g/t Ag from 186m. GN26-03 (Expansion): 170.8m of 0.24% Cu, 50 ppm Mo and 0.3 g/t Ag from 408.2m downhole (~300m below surface) including 45.9m of 0.40% Cu, 133 ppm Mo and 0.4 g/t Ag from 408.2m. GN26-04 (Resource confirmation): 278m of 0.38% Cu, 46 ppm Mo and 0.4 g/t Ag from 22m depth including 150m of 0.51% Cu, 58 ppm Mo and 0.5 g/t Ag from 66m. The drill holes encountered copper mineralization occurring predominantly as sulfides, mainly chalcopyrite with local bornite, in vein stockworks and sheeted vein zones and disseminations associated with a multiphase porphyry intrusion, consistent with historical logs and the Company's relogging work. GN26-01 encountered a short interval of oxidized copper mineralization near surface, to be more fully characterized by ongoing sequential leach assaying. Comparable mineralization was encountered in GN26-02; however, final QA/QC review for that hole is pending so it is not reported in this release. Holes GN26-01 and GN26-04 are the first of a planned eight resource confirmation holes. They drill down the plunge of the deposit to collect a multi-element assay suite with a full QA/QC protocol that will be used to upgrade the historic resource estimate to a modern standard. The holes intersected grades and widths that are consistent with expectations, based on grade models generated from historical drill hole data. The Getty North deposit is approximately 350 metres wide east-west and 500 metres wide north-south and remains open down plunge. True width of mineralization in the drill holes will be determined once geological modelling is completed but at present is not known. GN26-03 is an expansion hole that was drilled as a >65m down-plunge step-out beneath historical drilling and indicates the continuation of mineralization at depth which remains open. The relatively sharp increase in grade marking the start of the intercept in this hole occurs at a fault, highlighting the potential to identify fault-offset mineralization nearby. Similarly, the relatively sharp decreases in grade at depth in GN26-01 and GN26-04 are interpreted to be in part fault-related and occur southeast of the cross section line. Drilling is ongoing to complete an updated geological model and fully characterize the geometry and structural controls of mineralization. An additional 11 holes for a total of 7,377m have been completed at Getty North to date. Assay results and/or QA/QC review are pending for these holes, and sampling remains ongoing for some. Drilling is also ongoing at Getty South. Reported intervals represent drilled widths and not true widths. Drill holes were sampled at continuous 3m intervals, though samples are shorter to accommodate geological boundaries. Samples were halved by core saw on site, with one half sent to ALS Laboratories in Kamloops or North Vancouver for preparation and pulps were assayed in North Vancouver. Samples were prepared and assayed following ALS method codes: PREP-31, ME-MS61, and Au-ICP21. Selected samples were also assayed by sequential leach package Cu-PKG06LI, for which a split of the pulp was analyzed at ALS Laboratories in Lima, Peru. The Company followed a QA/QC program involving the use of blanks, standards and duplicates.
공시 • May 27Getty Copper Provides Update on Drill Target Identified At Getty SouthGetty Copper Inc. had completed a compilation and review of historical drilling data at Getty South. The database includes mainly drill holes completed in the 1970s and earlier, many of which were only partially sampled with no geological logs and uncertain locations. The review also included relogging of 13 drill holes completed in 1996 totaling 2,579 metres, all of which were fully sampled and assayed. This drilling data, combined with information from trenching and geological mapping shows that discrete breccia-hosted higher grade copper zones within Getty South have been only partly defined. One of the most significant of these is the Trojan Zone, which includes the historical Trojan Mine. Reported historical drill intercepts include: 1.3% Cu over 23.2 m from 1.2 m depth in U-4; 0.9% Cu over 12.2 m from 13.7 m depth in U-5; 1.1% Cu over 9.1 m from 18.3 m depth in U-6; 1.7% Cu over 25 m from 18.3 m depth in U-9; 0.63% Cu over 20 m from 52.5 m depth in GS96-06; 0.8% Cu over 8.8 m from 72.8 m depth in U-1; 0.8% Cu over 39 m from 72.9 m depth in U-3 (The deepest intersection to date, 125m vertically below surface; hole collared underground). Notably, the Trojan Zone is partly coincident with an IP chargeability anomaly which strengthens at depth beneath historical drilling. IP anomalies indicate the presence of disseminated sulfide mineralization, which is very encouraging as chalcopyrite is by far the most abundant sulfide mineral encountered in drilling at Getty South. This anomaly and others across the property have been better defined by 3D inversions of historical geophysical data completed as part of the Company's ongoing district-scale exploration targeting work. The Trojan Zone will be the initial target of the planned drill program at Getty South. Planned drill holes ranging from 150 to 500 metres are designed to determine the geometry, grade, and mineralogy of extensions to the near-surface high-grade zones, while also testing geophysical anomalies located down-plunge of the high-grade breccia zones. The anomaly is considered prospective, as elevated IP chargeability indicates the presence of sulfides. Reported here for the first time based on data relied on for the non-current report Parkinson, C.L. and Fayram, T.S., 2009, National Instrument 43-101 Preliminary Feasibility Study Technical Report of the Getty Copper Project. The Company has not yet been able to verify the details of all historical drill holes at Getty South. The technical information contained in this news release has been reviewed and approved by Roy Greig, Ph.D., P.Geo., who is a Qualified Person as defined in "National Instrument 43-101 - Standards of Disclosure for Mineral Projects" and who is an officer of the Company - Vice President of Exploration.