View Financial HealthTalisman Metals 배당 및 자사주 매입배당 기준 점검 0/6Talisman Metals 배당금을 지급한 기록이 없습니다.핵심 정보n/a배당 수익률n/a자사주 매입 수익률총 주주 수익률n/a미래 배당 수익률n/a배당 성장률n/a다음 배당 지급일n/a배당락일n/a주당 배당금n/a배당 성향n/a최근 배당 및 자사주 매입 업데이트업데이트 없음모든 업데이트 보기Recent updates공시 • May 20Talisman Metals plc Reports Positive Stream Sediment Sampling Results At Fougnar ProjectTalisman Metals PLC reported the results of its recently completed stream sediment sampling program at the Company's Fougnar licenses, which are 25km west of the Tizert copper-silver mine. The stream sediment work, in combination with historical field work and mapping, confirms the priority of established drill targets. Additionally, a previously unknown area of potential mineralisation has been discovered and will be added to the anticipated drill program scheduled for the summer 2026. Talisman believes that the sediment rock formations at Fougnar have excellent potential to host a large sediment-hosted copper-silver deposit, similar to other such deposits in the Anti-Atlas area of central Morocco. The main work focus at the Fougnar Project to date has been on the northern section, due to outcropping mineralisation. However, significantly copper-anomalous samples were collected on the southern part of the Fougnar Project over a 1km long interval. A total of 132 stream sediment samples were collected across the Fougnar Project. Multiple anomalous catchments were identified, with assay results of up to: 200 ppm Cu (Copper), 6,510 ppm Ba (Barium), 502 ppm Pb (Lead), 161 ppm Zn (Zinc). Newly identified target corridors extend over approximately 4 km across six distinct target areas, in addition to the existing 2.5 km mineralised trend identified along strike. Historical trenching areas containing known mineralisation were successfully confirmed by stream sediment sampling and used as orientation areas to establish threshold values for copper geochemical anomalies. Several geochemical anomalies are spatially associated with mapped structural features identified in the field and interpreted from ground TEM surveys and favourable lithological units within the basal series stratigraphy. Stream sediment samples were collected from fine sediment traps within active drainage channels over intervals of approximately 20-30 m along stream courses, while avoiding areas affected by anthropogenic contamination or stream disturbance. Sample locations were recorded using handheld GPS devices. Samples were dried and sieved to <63 µm prior to analysis. A total of 23 QA/QC samples were inserted into the sample stream, comprising approximately 5% blanks, 5% field duplicates, and 5% certified reference materials. Samples were submitted to the ONHYM laboratory in Rabat, Morocco for multi-element analysis using a three-acid digestion (HCl-HNO3-HF) with ICP-AES finish. The analytical method has a lower detection limit of 5 ppm for copper (Cu) and 1 ppm for silver (Ag). Blank samples showed no evidence of contamination above three times the detection limit for Cu or Ag. Field duplicates demonstrated excellent repeatability, with an R² value of 0.99. Certified reference materials consistently returned copper values approximately 10-20% below certified values, and the Company is reviewing the potential analytical bias; however, the Company does not currently consider this issue to materially impact the interpretation of the results. Follow-up work programmes underway including: Detailed geological mapping and rock-chip sampling; Trenching across priority target areas; Follow-up drilling of any significant trench results to test mineralisation at depth and along strike. The information in this announcement that relates to historical reported exploration results is based on, and fairly represents, information and supporting documentation prepared by previous operators and/or extracted from historical reports. The historical exploration results referred to in this announcement were reported prior to the introduction of the JORC Code (2012) and have not been reported in accordance with the JORC Code (2012). A Competent Person has not done sufficient work to disclose the historical exploration results in accordance with the JORC Code (2012). It is possible that following further evaluation and/or exploration work, the accuracy and reliability of the historical exploration results may not be confirmed. The Company has not independently verified the historical exploration results, and no assurance can be given that future exploration work will result in the confirmation or upgrade of the historical results to JORC Code (2012) compliant Mineral Resources or Ore Reserves. The Company considers the historical exploration results to be relevant as they provide an indication of the potential of the project. However, the information should not be relied upon as a representation of the current mineral resource or exploration potential. The technical disclosure in this news release has been approved by Fabien Linares, MSc, MAusIMM, a Qualified Person as defined in JORC 2012. The scientific and technical information summarized in this disclosure and related to historic exploration was reviewed by Mr. Linares and he has visited the Project area. Mr. Linares is Head Geologist of Talisman Metals PLC and has sufficient experience that is relevant to the commodity, style of mineralisation or type of deposit under consideration and activity which he is undertaking to qualify as a Competent Person under the JORC code (2012 Edition). HCl-HNO3-HF Hydrochloric-hydrofluoric acid material that is used in elemental laboratory testing of rock samples. ICP-AES Inductively Coupled Plasma Atomic Emission Spectrometer is a type of elemental analysis used in laboratories. Ppm Parts per million. R² value A statistical measure regarding how well a data set forms a trend.공시 • Apr 29Talisman Metals plc Provides Update on Tirzzit Project Sampling and Exploration ResultsTalisman Metals PLC reported it has collected 7 channel samples at the Tirzzit Project, for a total length of 23m and 38 Trench samples including 5 QAQC samples and 3 Grab samples which have been sent for assaying. The first phase of fieldwork at Tirzzit consists of testing the grade and thickness of mineralisation along strike, from west to east, on outcrop in order to confirm: lateral continuity; historical Copper (Cu) and Silver (Ag) grades; and the location of thicker intervals for channel sampling at approximately 100m spacing, using a Jacob staff to determine true thickness and improve understanding of the controls on mineralisation. The initial 700m of strike targeted a horizon 1 to 5m thick from surface, exhibiting malachite mineralisation at surface amongst the 4.6 kilometres mineralized horizons that has been historically identified. The next phases of sampling will include: continuing channel sampling of the basal series from west to east, from Licence LE393478 to LE393507; channel sampling of the basal series within historical adits developed by the BRPM; conducting mapping of the lower limestone units to identify gossans, followed by grab sampling-initially above historically successful drill holes and subsequently across untested areas; and infill sampling of historical stream sediment coverage within previously untested watersheds. The preparation of a drill programme to redrill historical short holes that have missed mineralisation and drill out open extensions of mineralisation. The Tirzzit Project is a sediment-hosted stratiform Cu-Ag system, located 225km east of the city of Agadir, Morocco. The acquisition transaction of the Project was announced February 16, 2026 from a wholly owned subsidiary of Aya Silver & Gold Inc. (TSX: AYA; OTCQX: AYASF), the Company's 4.7% shareholder. The Project consists of two mining licenses covering a surface area of 16.5km2. Historic drilling results as reported by Moroccan Government agency Bureau of Research and Mining Participations (BRPM) between 1972 and 1976 include drill intersections of 3.16% Cu over 2.5m and 0.60% Cu over 11.4m. Presently the Company is reviewing the extensive BRPM Reports and past collected geophysical data for exploration planning slated to commence in Second Half 2026. Talisman is processing with Aya the formal transfer of the Tirzzit licences on the back of the acquisition agreement announced February 16, 2026. The technical disclosure in this news release has been approved by Fabien Linares, MSc, MAusIMM, a Qualified Person as defined in JORC 2012. The scientific and technical information summarized in this disclosure and related to historic exploration was reviewed by Mr. Linares and he has visited the Project area. Mr. Linares is Head Geologist of Talisman Metals PLC and has sufficient experience that is relevant to the commodity, style of mineralisation or type of deposit under consideration and activity which he is undertaking to qualify as a Competent Person under the JORC code (2012 Edition). The information in this announcement that relates to historical reported exploration results is based on, and fairly represents, information and supporting documentation prepared by previous operators and/or extracted from historical reports. The historical exploration results referred to in this announcement were reported prior to the introduction of the JORC Code (2012) and have not been reported in accordance with the JORC Code (2012). A Competent Person has not done sufficient work to disclose the historical exploration results in accordance with the JORC Code (2012). It is possible that following further evaluation and/or exploration work, the accuracy and reliability of the historical exploration results may not be confirmed. The Company has not independently verified the historical exploration results, and no assurance can be given that future exploration work will result in the confirmation or upgrade of the historical results to JORC Code (2012) compliant Mineral Resources or Ore Reserves. The Company considers the historical exploration results to be relevant as they provide an indication of the potential of the project. However, the information should not be relied upon as a representation of the current mineral resource or exploration potential.지급의 안정성과 성장배당 데이터 가져오는 중안정적인 배당: 과거에 TLM 의 주당 배당금이 안정적이었는지 판단하기에는 데이터가 부족합니다.배당금 증가: TLM 의 배당금 지급이 증가했는지 판단하기에는 데이터가 부족합니다.배당 수익률 vs 시장Talisman Metals 배당 수익률 vs 시장TLM의 배당 수익률은 시장과 어떻게 비교되나요?구분배당 수익률회사 (TLM)n/a시장 하위 25% (DE)1.5%시장 상위 25% (DE)4.5%업계 평균 (Metals and Mining)1.4%분석가 예측 (TLM) (최대 3년)n/a주목할만한 배당금: 회사가 최근 지급을 보고하지 않았기 때문에 하위 25%의 배당금 지급자에 대해 TLM 의 배당 수익률을 평가할 수 없습니다.고배당: 회사가 최근 지급을 보고하지 않았기 때문에 배당금 지급자의 상위 25%에 대해 TLM 의 배당 수익률을 평가할 수 없습니다.주주 대상 이익 배당수익 보장: 배당금 지급이 수익으로 충당되는지 확인하기 위해 TLM 의 지급 비율을 계산하기에는 데이터가 부족합니다.주주 현금 배당현금 흐름 범위: TLM 에서 지급을 보고하지 않았기 때문에 배당 지속 가능성을 계산할 수 없습니다.높은 배당을 제공하는 우량 기업 찾기7D1Y7D1Y7D1YDE 시장에서 배당이 강한 기업.View Management기업 분석 및 재무 데이터 상태데이터최종 업데이트 (UTC 시간)기업 분석2026/05/22 23:46종가2026/05/22 00:00수익2025/06/30연간 수익2024/12/31데이터 소스당사의 기업 분석에 사용되는 데이터는 S&P Global Market Intelligence LLC에서 제공됩니다. 아래 데이터는 이 보고서를 생성하기 위해 분석 모델에서 사용됩니다. 데이터는 정규화되므로 소스가 제공된 후 지연이 발생할 수 있습니다.패키지데이터기간미국 소스 예시 *기업 재무제표10년손익계산서현금흐름표대차대조표SEC 양식 10-KSEC 양식 10-Q분석가 컨센서스 추정치+3년재무 예측분석가 목표주가분석가 리서치 보고서Blue Matrix시장 가격30년주가배당, 분할 및 기타 조치ICE 시장 데이터SEC 양식 S-1지분 구조10년주요 주주내부자 거래SEC 양식 4SEC 양식 13D경영진10년리더십 팀이사회SEC 양식 10-KSEC 양식 DEF 14A주요 개발10년회사 공시SEC 양식 8-K* 미국 증권에 대한 예시이며, 비(非)미국 증권에는 해당 국가의 규제 서식 및 자료원을 사용합니다.별도로 명시되지 않는 한 모든 재무 데이터는 연간 기간을 기준으로 하지만 분기별로 업데이트됩니다. 이를 TTM(최근 12개월) 또는 LTM(지난 12개월) 데이터라고 합니다. 자세히 알아보기.분석 모델 및 스노우플레이크이 보고서를 생성하는 데 사용된 분석 모델에 대한 자세한 내용은 당사의 Github 페이지에서 확인하실 수 있습니다. 또한 보고서 활용 방법에 대한 가이드와 YouTube 튜토리얼도 제공합니다.Simply Wall St 분석 모델을 설계하고 구축한 세계적 수준의 팀에 대해 알아보세요.산업 및 섹터 지표산업 및 섹터 지표는 Simply Wall St가 6시간마다 계산하며, 프로세스에 대한 자세한 내용은 Github에서 확인할 수 있습니다.분석가 소스Talisman Metals PLC는 0명의 분석가가 다루고 있습니다. 이 중 0명의 분석가가 우리 보고서에 입력 데이터로 사용되는 매출 또는 수익 추정치를 제출했습니다. 분석가의 제출 자료는 하루 종일 업데이트됩니다.
공시 • May 20Talisman Metals plc Reports Positive Stream Sediment Sampling Results At Fougnar ProjectTalisman Metals PLC reported the results of its recently completed stream sediment sampling program at the Company's Fougnar licenses, which are 25km west of the Tizert copper-silver mine. The stream sediment work, in combination with historical field work and mapping, confirms the priority of established drill targets. Additionally, a previously unknown area of potential mineralisation has been discovered and will be added to the anticipated drill program scheduled for the summer 2026. Talisman believes that the sediment rock formations at Fougnar have excellent potential to host a large sediment-hosted copper-silver deposit, similar to other such deposits in the Anti-Atlas area of central Morocco. The main work focus at the Fougnar Project to date has been on the northern section, due to outcropping mineralisation. However, significantly copper-anomalous samples were collected on the southern part of the Fougnar Project over a 1km long interval. A total of 132 stream sediment samples were collected across the Fougnar Project. Multiple anomalous catchments were identified, with assay results of up to: 200 ppm Cu (Copper), 6,510 ppm Ba (Barium), 502 ppm Pb (Lead), 161 ppm Zn (Zinc). Newly identified target corridors extend over approximately 4 km across six distinct target areas, in addition to the existing 2.5 km mineralised trend identified along strike. Historical trenching areas containing known mineralisation were successfully confirmed by stream sediment sampling and used as orientation areas to establish threshold values for copper geochemical anomalies. Several geochemical anomalies are spatially associated with mapped structural features identified in the field and interpreted from ground TEM surveys and favourable lithological units within the basal series stratigraphy. Stream sediment samples were collected from fine sediment traps within active drainage channels over intervals of approximately 20-30 m along stream courses, while avoiding areas affected by anthropogenic contamination or stream disturbance. Sample locations were recorded using handheld GPS devices. Samples were dried and sieved to <63 µm prior to analysis. A total of 23 QA/QC samples were inserted into the sample stream, comprising approximately 5% blanks, 5% field duplicates, and 5% certified reference materials. Samples were submitted to the ONHYM laboratory in Rabat, Morocco for multi-element analysis using a three-acid digestion (HCl-HNO3-HF) with ICP-AES finish. The analytical method has a lower detection limit of 5 ppm for copper (Cu) and 1 ppm for silver (Ag). Blank samples showed no evidence of contamination above three times the detection limit for Cu or Ag. Field duplicates demonstrated excellent repeatability, with an R² value of 0.99. Certified reference materials consistently returned copper values approximately 10-20% below certified values, and the Company is reviewing the potential analytical bias; however, the Company does not currently consider this issue to materially impact the interpretation of the results. Follow-up work programmes underway including: Detailed geological mapping and rock-chip sampling; Trenching across priority target areas; Follow-up drilling of any significant trench results to test mineralisation at depth and along strike. The information in this announcement that relates to historical reported exploration results is based on, and fairly represents, information and supporting documentation prepared by previous operators and/or extracted from historical reports. The historical exploration results referred to in this announcement were reported prior to the introduction of the JORC Code (2012) and have not been reported in accordance with the JORC Code (2012). A Competent Person has not done sufficient work to disclose the historical exploration results in accordance with the JORC Code (2012). It is possible that following further evaluation and/or exploration work, the accuracy and reliability of the historical exploration results may not be confirmed. The Company has not independently verified the historical exploration results, and no assurance can be given that future exploration work will result in the confirmation or upgrade of the historical results to JORC Code (2012) compliant Mineral Resources or Ore Reserves. The Company considers the historical exploration results to be relevant as they provide an indication of the potential of the project. However, the information should not be relied upon as a representation of the current mineral resource or exploration potential. The technical disclosure in this news release has been approved by Fabien Linares, MSc, MAusIMM, a Qualified Person as defined in JORC 2012. The scientific and technical information summarized in this disclosure and related to historic exploration was reviewed by Mr. Linares and he has visited the Project area. Mr. Linares is Head Geologist of Talisman Metals PLC and has sufficient experience that is relevant to the commodity, style of mineralisation or type of deposit under consideration and activity which he is undertaking to qualify as a Competent Person under the JORC code (2012 Edition). HCl-HNO3-HF Hydrochloric-hydrofluoric acid material that is used in elemental laboratory testing of rock samples. ICP-AES Inductively Coupled Plasma Atomic Emission Spectrometer is a type of elemental analysis used in laboratories. Ppm Parts per million. R² value A statistical measure regarding how well a data set forms a trend.
공시 • Apr 29Talisman Metals plc Provides Update on Tirzzit Project Sampling and Exploration ResultsTalisman Metals PLC reported it has collected 7 channel samples at the Tirzzit Project, for a total length of 23m and 38 Trench samples including 5 QAQC samples and 3 Grab samples which have been sent for assaying. The first phase of fieldwork at Tirzzit consists of testing the grade and thickness of mineralisation along strike, from west to east, on outcrop in order to confirm: lateral continuity; historical Copper (Cu) and Silver (Ag) grades; and the location of thicker intervals for channel sampling at approximately 100m spacing, using a Jacob staff to determine true thickness and improve understanding of the controls on mineralisation. The initial 700m of strike targeted a horizon 1 to 5m thick from surface, exhibiting malachite mineralisation at surface amongst the 4.6 kilometres mineralized horizons that has been historically identified. The next phases of sampling will include: continuing channel sampling of the basal series from west to east, from Licence LE393478 to LE393507; channel sampling of the basal series within historical adits developed by the BRPM; conducting mapping of the lower limestone units to identify gossans, followed by grab sampling-initially above historically successful drill holes and subsequently across untested areas; and infill sampling of historical stream sediment coverage within previously untested watersheds. The preparation of a drill programme to redrill historical short holes that have missed mineralisation and drill out open extensions of mineralisation. The Tirzzit Project is a sediment-hosted stratiform Cu-Ag system, located 225km east of the city of Agadir, Morocco. The acquisition transaction of the Project was announced February 16, 2026 from a wholly owned subsidiary of Aya Silver & Gold Inc. (TSX: AYA; OTCQX: AYASF), the Company's 4.7% shareholder. The Project consists of two mining licenses covering a surface area of 16.5km2. Historic drilling results as reported by Moroccan Government agency Bureau of Research and Mining Participations (BRPM) between 1972 and 1976 include drill intersections of 3.16% Cu over 2.5m and 0.60% Cu over 11.4m. Presently the Company is reviewing the extensive BRPM Reports and past collected geophysical data for exploration planning slated to commence in Second Half 2026. Talisman is processing with Aya the formal transfer of the Tirzzit licences on the back of the acquisition agreement announced February 16, 2026. The technical disclosure in this news release has been approved by Fabien Linares, MSc, MAusIMM, a Qualified Person as defined in JORC 2012. The scientific and technical information summarized in this disclosure and related to historic exploration was reviewed by Mr. Linares and he has visited the Project area. Mr. Linares is Head Geologist of Talisman Metals PLC and has sufficient experience that is relevant to the commodity, style of mineralisation or type of deposit under consideration and activity which he is undertaking to qualify as a Competent Person under the JORC code (2012 Edition). The information in this announcement that relates to historical reported exploration results is based on, and fairly represents, information and supporting documentation prepared by previous operators and/or extracted from historical reports. The historical exploration results referred to in this announcement were reported prior to the introduction of the JORC Code (2012) and have not been reported in accordance with the JORC Code (2012). A Competent Person has not done sufficient work to disclose the historical exploration results in accordance with the JORC Code (2012). It is possible that following further evaluation and/or exploration work, the accuracy and reliability of the historical exploration results may not be confirmed. The Company has not independently verified the historical exploration results, and no assurance can be given that future exploration work will result in the confirmation or upgrade of the historical results to JORC Code (2012) compliant Mineral Resources or Ore Reserves. The Company considers the historical exploration results to be relevant as they provide an indication of the potential of the project. However, the information should not be relied upon as a representation of the current mineral resource or exploration potential.