View Financial HealthEdge Copper 배당 및 자사주 매입배당 기준 점검 0/6Edge Copper 배당금을 지급한 기록이 없습니다.핵심 정보n/a배당 수익률-26.8%자사주 매입 수익률총 주주 수익률-26.8%미래 배당 수익률n/a배당 성장률n/a다음 배당 지급일n/a배당락일n/a주당 배당금n/a배당 성향n/a최근 배당 및 자사주 매입 업데이트업데이트 없음모든 업데이트 보기Recent updates공고 • Jul 10Edge Copper Corporation Reports Assay Results From Nine Additional Diamond Drill Holes At Zonia Copper ProjectEdge Copper Corporation reported assay results from nine additional diamond drill holes completed as part of its ongoing drill program at the Company's 100%-owned Zonia Copper Project in Arizona. The holes reported were drilled primarily as infill within the current mineral resource area and returned broad intervals of copper mineralization that reinforce continuity of the oxide system and support the Company's objective of increasing confidence in the current resource model. These results bring the total number of holes reported from the current program to 20. As the infill program advances, Edge Copper is shifting the balance of drilling toward systematic testing of the deposit extents. Current and planned holes are progressing around the perimeter of the mineralized system to establish hanging-wall and footwall contacts from surface to depth and to test continuity along strike, up dip and down dip. The mineralized footprint remains open to the north, south, east and west with drilling yet to define its full extent. Drill Hole Highlights: ZND0027 returned 697 ft grading 0.28% CuT from 191 ft, including 170 ft grading 0.47% CuT and 180 ft grading 0.37% CuT. ZND0049 returned 544 ft grading 0.27% CuT from surface, including 199 ft grading 0.40% CuT. ZND0023 returned 369 ft grading 0.22% CuT from surface, including 30 ft grading 0.30% CuT. ZND0024 returned 304 ft grading 0.21% CuT from 436 ft, including 90 ft grading 0.28% CuT and 40 ft grading 0.33% CuT. ZND0018 returned 78 ft grading 0.40% CuT from surface. The reported holes are distributed across the existing resource footprint and were designed principally to test continuity, grade distribution and geological interpretation within areas currently classified as Inferred Mineral Resources. Broad intercepts in ZND0027 and ZND0049, together with near-surface mineralization in ZND0023 and ZND0018 provide additional data for the Company's geological and resource models. The results support the objective of increasing confidence in the current resource and evaluating future conversion of Inferred Mineral Resources to the Indicated category.Recent Insider Transactions • Jun 11Independent Director recently bought €620k worth of stockOn the 9th of June, Robert Kopple bought around 2m shares on-market at roughly €0.36 per share. This transaction amounted to 18% of their direct individual holding at the time of the trade. This was the largest purchase by an insider in the last 3 months. Insiders have collectively bought €1.3m more in shares than they have sold in the last 12 months.공고 • Jun 10Edge Copper Corporation announced that it has received CAD 4.045353 million in fundingOn June 9, 2026, Edge Copper Corporation closed the transaction. The company issued 6,974,747 common shares at a price of CAD 0.58 for gross proceeds of CAD 4,045,353.26. The transaction included participation from certain insiders of the company. In connection with the Private Placement, the Company paid a cash fee of CAD 6,251 to an arm’s length registrant for services rendered in connection with one subscription.공고 • Jun 03+ 1 more updateEdge Copper Corporation announced that it expects to receive CAD 2.795395 million in fundingEdge Copper Corporation announced a non-brokered private placement of 4,819,647 common shares at a price of CAD 0.58 per common share for the gross proceeds of CAD 2,795,395.26 on June 3, 2026. Transaction will include participation from insiders of the company.Board Change • May 26High number of new and inexperienced directorsThere are 6 new directors who have joined the board in the last 3 years. The company's board is composed of: 6 new directors. No experienced directors. 1 highly experienced director. Co-founder, President & Director Letitia Wong is the most experienced director on the board, commencing their role in 2015. The following issues are considered to be risks according to the Simply Wall St Risk Model: Lack of board continuity. Lack of experienced directors.지급의 안정성과 성장배당 데이터 가져오는 중안정적인 배당: 과거에 QX7 의 주당 배당금이 안정적이었는지 판단하기에는 데이터가 부족합니다.배당금 증가: QX7 의 배당금 지급이 증가했는지 판단하기에는 데이터가 부족합니다.배당 수익률 vs 시장Edge Copper 배당 수익률 vs 시장QX7의 배당 수익률은 시장과 어떻게 비교되나요?구분배당 수익률회사 (QX7)n/a시장 하위 25% (DE)1.6%시장 상위 25% (DE)4.7%업계 평균 (Metals and Mining)1.4%분석가 예측 (QX7) (최대 3년)n/a주목할만한 배당금: 회사가 최근 지급을 보고하지 않았기 때문에 하위 25%의 배당금 지급자에 대해 QX7 의 배당 수익률을 평가할 수 없습니다.고배당: 회사가 최근 지급을 보고하지 않았기 때문에 배당금 지급자의 상위 25%에 대해 QX7 의 배당 수익률을 평가할 수 없습니다.주주 대상 이익 배당수익 보장: 배당금 지급이 수익으로 충당되는지 확인하기 위해 QX7 의 지급 비율을 계산하기에는 데이터가 부족합니다.주주 현금 배당현금 흐름 범위: QX7 에서 지급을 보고하지 않았기 때문에 배당 지속 가능성을 계산할 수 없습니다.높은 배당을 제공하는 우량 기업 찾기7D1Y7D1Y7D1YDE 시장에서 배당이 강한 기업.View Management기업 분석 및 재무 데이터 상태데이터최종 업데이트 (UTC 시간)기업 분석2026/07/23 22:28종가2026/07/23 00:00수익2026/03/31연간 수익2025/12/31데이터 소스당사의 기업 분석에 사용되는 데이터는 S&P Global Market Intelligence LLC에서 제공됩니다. 아래 데이터는 이 보고서를 생성하기 위해 분석 모델에서 사용됩니다. 데이터는 정규화되므로 소스가 제공된 후 지연이 발생할 수 있습니다.패키지데이터기간미국 소스 예시 *기업 재무제표10년손익계산서현금흐름표대차대조표SEC 양식 10-KSEC 양식 10-Q분석가 컨센서스 추정치+3년재무 예측분석가 목표주가분석가 리서치 보고서Blue Matrix시장 가격30년주가배당, 분할 및 기타 조치ICE 시장 데이터SEC 양식 S-1지분 구조10년주요 주주내부자 거래SEC 양식 4SEC 양식 13D경영진10년리더십 팀이사회SEC 양식 10-KSEC 양식 DEF 14A주요 개발10년회사 공시SEC 양식 8-K* 미국 증권에 대한 예시이며, 비(非)미국 증권에는 해당 국가의 규제 서식 및 자료원을 사용합니다.별도로 명시되지 않는 한 모든 재무 데이터는 연간 기간을 기준으로 하지만 분기별로 업데이트됩니다. 이를 TTM(최근 12개월) 또는 LTM(지난 12개월) 데이터라고 합니다. 자세히 알아보기.분석 모델 및 스노우플레이크이 보고서를 생성하는 데 사용된 분석 모델의 세부 정보는 당사의 GitHub 페이지에서 확인하실 수 있습니다. 또한 보고서 사용 방법에 대한 가이드와 YouTube 튜토리얼도 제공하고 있습니다.Simply Wall St 분석 모델을 설계하고 구축한 세계적 수준의 팀에 대해 알아보세요.산업 및 섹터 지표산업 및 섹터 지표는 Simply Wall St가 6시간마다 계산하며, 프로세스에 대한 자세한 내용은 Github에서 확인할 수 있습니다.분석가 소스Edge Copper Corporation는 0명의 분석가가 다루고 있습니다. 이 중 0명의 분석가가 우리 보고서에 입력 데이터로 사용되는 매출 또는 수익 추정치를 제출했습니다. 분석가의 제출 자료는 하루 종일 업데이트됩니다.
공고 • Jul 10Edge Copper Corporation Reports Assay Results From Nine Additional Diamond Drill Holes At Zonia Copper ProjectEdge Copper Corporation reported assay results from nine additional diamond drill holes completed as part of its ongoing drill program at the Company's 100%-owned Zonia Copper Project in Arizona. The holes reported were drilled primarily as infill within the current mineral resource area and returned broad intervals of copper mineralization that reinforce continuity of the oxide system and support the Company's objective of increasing confidence in the current resource model. These results bring the total number of holes reported from the current program to 20. As the infill program advances, Edge Copper is shifting the balance of drilling toward systematic testing of the deposit extents. Current and planned holes are progressing around the perimeter of the mineralized system to establish hanging-wall and footwall contacts from surface to depth and to test continuity along strike, up dip and down dip. The mineralized footprint remains open to the north, south, east and west with drilling yet to define its full extent. Drill Hole Highlights: ZND0027 returned 697 ft grading 0.28% CuT from 191 ft, including 170 ft grading 0.47% CuT and 180 ft grading 0.37% CuT. ZND0049 returned 544 ft grading 0.27% CuT from surface, including 199 ft grading 0.40% CuT. ZND0023 returned 369 ft grading 0.22% CuT from surface, including 30 ft grading 0.30% CuT. ZND0024 returned 304 ft grading 0.21% CuT from 436 ft, including 90 ft grading 0.28% CuT and 40 ft grading 0.33% CuT. ZND0018 returned 78 ft grading 0.40% CuT from surface. The reported holes are distributed across the existing resource footprint and were designed principally to test continuity, grade distribution and geological interpretation within areas currently classified as Inferred Mineral Resources. Broad intercepts in ZND0027 and ZND0049, together with near-surface mineralization in ZND0023 and ZND0018 provide additional data for the Company's geological and resource models. The results support the objective of increasing confidence in the current resource and evaluating future conversion of Inferred Mineral Resources to the Indicated category.
Recent Insider Transactions • Jun 11Independent Director recently bought €620k worth of stockOn the 9th of June, Robert Kopple bought around 2m shares on-market at roughly €0.36 per share. This transaction amounted to 18% of their direct individual holding at the time of the trade. This was the largest purchase by an insider in the last 3 months. Insiders have collectively bought €1.3m more in shares than they have sold in the last 12 months.
공고 • Jun 10Edge Copper Corporation announced that it has received CAD 4.045353 million in fundingOn June 9, 2026, Edge Copper Corporation closed the transaction. The company issued 6,974,747 common shares at a price of CAD 0.58 for gross proceeds of CAD 4,045,353.26. The transaction included participation from certain insiders of the company. In connection with the Private Placement, the Company paid a cash fee of CAD 6,251 to an arm’s length registrant for services rendered in connection with one subscription.
공고 • Jun 03+ 1 more updateEdge Copper Corporation announced that it expects to receive CAD 2.795395 million in fundingEdge Copper Corporation announced a non-brokered private placement of 4,819,647 common shares at a price of CAD 0.58 per common share for the gross proceeds of CAD 2,795,395.26 on June 3, 2026. Transaction will include participation from insiders of the company.
Board Change • May 26High number of new and inexperienced directorsThere are 6 new directors who have joined the board in the last 3 years. The company's board is composed of: 6 new directors. No experienced directors. 1 highly experienced director. Co-founder, President & Director Letitia Wong is the most experienced director on the board, commencing their role in 2015. The following issues are considered to be risks according to the Simply Wall St Risk Model: Lack of board continuity. Lack of experienced directors.