View Financial HealthSantana Minerals 배당 및 자사주 매입배당 기준 점검 0/6Santana Minerals 배당금을 지급한 기록이 없습니다.핵심 정보n/a배당 수익률-18.0%자사주 매입 수익률총 주주 수익률-18.0%미래 배당 수익률n/a배당 성장률n/a다음 배당 지급일n/a배당락일n/a주당 배당금n/a배당 성향n/a최근 배당 및 자사주 매입 업데이트업데이트 없음모든 업데이트 보기Recent updates공고 • Jul 27Santana Minerals Limited Reports Outstanding Bonanza Gold Hits from RAS Stage 1 AreaSantana Minerals Limited has received outstanding results from within the high-grade core of the Rise and Shine (RAS) orebody, which contains the bulk of the deposit's ounces. Infill hole MDD528 has reduced spacing to 20m from the nearest holes and returned a bonanza intercept of 24.4m @ 10.9 g/t Au from 165.7m (true width 20.2m). Two additional sub-parallel intercepts of a second, stacked zone deeper in the hole returned 2.0m @ 89.5 g/t Au from 197m (true width 1.7m) with abundant visible gold, and 3.0m @ 2.5 g/t Au from 207m (true width 2.5m). This hole significantly improves the grade over the previous model with wider spaced drilling. The deeper zone of 2.0m @ 89.5g/t confirms the sub-parallel trend of a high-grade zone that can be accessed from the open pit. Two other infill holes, MDD526 and MDD527, returned intercepts consistent with previous drilling, confirming the continuity of mineralisation projected from the wider-spaced drill pattern and increasing confidence in the first ore scheduled to be mined. MDD526 returned 2.0m @ 8.5 g/t Au from 172m (true width 1.8m), and 10.0m @ 2.9 g/t Au from 179m (true width 9.0m). MDD527 returned 5.0m @ 1.3 g/t Au from 176m (true width 4.9m), and 11.0m @ 1.0 g/t Au from 188m (true width 10.8m). The results presented above are from drilling samples collected by diamond drilling. Diamond drill (DD) core samples for laboratory assay are typically 1 metre samples of diamond saw cut ½ diameter core. Where distinct mineralisation boundaries are logged, sample lengths are adjusted to the respective geological contact. Fire Assay: Samples are crushed at the receiving laboratory to minus 2mm (85% passing) and split using a rotary splitter to provide 1kg for pulverising in a ring mill to -75um. Pulps are fire assayed (FAA) using a 50g charge with AAS finish. Certified standards, blanks and field replicates are inserted with the original batches at a frequency of ~5% each for QAQC purposes. Photon Assay: Samples are crushed at the receiving laboratory to 3.5mm using a jaw crusher and split using a linear sample divider to provide a 500g sample. The 500g sample is assayed via a Chrysos Photon Assay unit. Certified standards, blanks and field replicates are inserted with the original batches at a frequency of ~5% each for QAQC purposes. Blank material is inserted after samples with notable visible gold to assess for carryover contamination. All pulps and crush reject (CREJ) are returned from the laboratory to MGL for storage on site. Of these returned samples, a further ~5% are re-submitted as QC check samples which involve pulp FAA re-assays by the original and an umpire laboratory and CREJ re-assayed by 500-gram (+ & -75mu) screen fire assay (SFA), 1kg BLEG (LeachWELL) and 2*500-gram Photon analysis (PHA) for gold. Where multiple assays exist for a single sample interval, larger samples are ranked in the database: PHA > BLEG > SFA > FAA. All returned pulps are analysed for a suite of 31 elements by portable XRF (pXRF). The sampling, sub-sampling and assaying methods are appropriate to the geology and mineralisation of the RAS deposit. Current drilling techniques are diamond coring (DD) PQ3 and HQ3 size triple tube. Where PQ3 core size (83mm diameter) is commenced this is maintained throughout the DD hole until drilling conditions dictate reduction in size to HQ3 core (61mm diameter). Holes deeper than 750m are cased off to NQ3 (45mm diameter). DD pre-collars are drilled open hole through un-mineralised TZ3 schist to within about 15 m of the mineralisation hangingwall, at which point diamond coring commences. RC drilling is only carried out where the mineralisation target is less than about 150m downhole and used a face sample bit with sample collected in a cyclone mounted over a rotary splitter producing 2 x 30% splits and 1 x 40% split. The two 30% splits were used as primary sample and field duplicate (if submitted) with the 40% split used for logging and then stored at the MGL core yard. Drillholes are oriented to intersect known mineralised features in a nominally perpendicular orientation as much as is practicable. A small number of holes are oriented in other directions to resolve areas of ambiguous geological interpretation. All drill core is oriented to assist with interpretation of mineralisation and structure using a Trucore orientation tool. DD core sample recoveries are recorded by the drillers at the time of drilling by measuring the actual distance of the drill run against the actual core recovered. The measurements are checked by the site geologist. When poor core recoveries are recorded the site geologist and driller endeavour to immediately rectify any problems to maintain maximum core recoveries. DD core logging to date indicate ~96% recoveries. RC sample recovery is measured as sample weight recovered. RC sample moisture for all RC drilling data was logged as dry (83.7% of RC samples), moist (12.0%) or wet (4.3%). All samples logged as wet were omitted from use in mineral resource estimation. The drilling contract used states for any given run, a level of recovery is required otherwise financial penalties are applied to the drill contractor to ensure sample recovery priority along with production performance. Sample grades were plotted against drilling recovery by drilling method and no relationship was established. Wet RC samples do show higher grades than dry RC samples. This may be due to wet RC samples coming from higher grade zones or sampling bias due to the loss of fines in wet samples. Due to a bias being present, wet RC samples are omitted from use in mineral resource estimation. All DD holes have been logged for their entire sampled length below upper open hole drilling (nominally 0-450 metres below collar). Data is recorded directly into AcQuire database with sufficient detail to support a Mineral Resource estimation (MRE). Logging is mostly qualitative but there are estimations of quartz and sulphide content and quantitative records of geological /structural unit, oxidation state and water table boundaries. Oriented DD core allows alpha /beta measurements to determine structural element detail (dip /dip direction) to supplement routine recording of lithologies /alteration /mineralisation /structure /oxidation /colour and other features for MRE reporting, geotechnical and metallurgical studies. All RC chips were sieved and logged for lithology, colour, oxidation, weathering, vein percentage and sulphide minerals. All core is photographed wet and dry before cutting. Sieved RC chips are also photographed. 100% of all relevant (within the gold grade domains) intersections were logged.공고 • Jul 21Santana Minerals Limited and Matakanui Gold Limited Announce Retirement of Frederick James Leslie Bunting as Non-Executive Director, Effective July 20, 2026Santana Minerals Ltd. announced the retirement of Mr. Frederick (Kim) Bunting as a Non-Executive Director of the Company and its subsidiaries effective 20 July 2026. Mr. Bunting has been a long-term Director of Santana and its wholly owned subsidiary, Matakanui Gold Limited (NZ) for many years and he was the driver of the team that made the Rise and Shine (RAS) discovery at the Bendigo-Ophir Gold Project.Recent Insider Transactions • Jul 09Insider recently bought €430k worth of stockOn the 8th of July, Peter Cook bought around 2m shares on-market at roughly €0.27 per share. This transaction amounted to 16% of their direct individual holding at the time of the trade. This was the largest purchase by an insider in the last 3 months. Insiders have collectively bought €441k more in shares than they have sold in the last 12 months.공고 • Jul 08Santana Minerals Limited Reports High-Grade Gold Infill Drill Results Support Early-Stage Mine PlanSantana Minerals Limited has returned high-grade gold intercepts from an infill drilling campaign designed to close up drill hole spacing in the southern area of the Rise and Shine (R S) deposit, where early-stage open pit mining is planned. These results are from the first four holes of a 12-hole program aimed at confirming the position of pre-production mining to deliver a consistent ore feed at planned processing rates. Strong intercepts from MDD504 and MDD524 confirm the tenor of the thick high-grade mineralised domain (HG1) in the upper Rise and Shine Shear Zone (RSSZ), with MDD504 also intercepting an additional zone of high-grade mineralisation beneath the HG1 in the domain currently classified as low-grade (LG1). MDD525 lower intercepts reinforce the continuity of stacked mineralised zones in the south of R S. The southern margin of the high-grade domain has been confirmed by fringe hole MDD523. Significant intercepts include: MDD504: 15.5m @ 7.7g/t Au from 185.0m (true width 12.2m), and 4.2m @ 14.5g/t Au from 211.8m (true width 3.3m); MDD524A: 7.0m @ 6.4g/t Au from 181.1m (true width 6.6m); MDD525: 6.7m @ 2.0g/t Au from 165.4m (true width 5.7m), 6.0m @ 1.9g/t Au from 175.0m (true width 5.2m), and 9.0m @ 3.9g/t Au from 184.0m (true width 7.8m); MDD523: 4.0m @ 0.8g/t Au from 157.0m (true width 4.0m). Drilling has further refined the understanding of the southern R S HG1 high-grade mineralised domain. Assay results from MDD504 and MDD524 confirm the continuity of HG1, with MDD504 intercept of similar thickness to adjacent drill holes but at a significantly higher-grade than modelled. MDD504 also intersected an additional high-grade zone of 4.2m at 14.5g/t Au beneath HG1 within the interpreted LG1 domain. This interval is interpreted to correlate with a comparable intercept in MDD382 to the east (6.0m at 11.9g/t Au), also modelled within LG1, suggesting the potential presence of a second stacked high-grade lens that will be evaluated during future geological modelling. The infill drill program is continuing with eight additional drill holes to be completed, aimed at closing hole spacing in areas targeted for early ore production. Mine plans are currently being refined ahead of advanced financing activities scheduled to be completed within three months of fast-track approval consents.공고 • Jul 04Santana Minerals Ltd Files Memorandum with the EPA Requesting the Processing of the BOGP FTA Application Be Resumed on August 17, 2026Santana Minerals Ltd. has filed a memorandum with the EPA requesting that the processing of the BOGP FTA application be resumed on August 17, 2026. This allows for a total processing pause of 35 working days to reply to the Expert Panel’s Request for Further Information 11 (RFI) issued on June 25, 2026 and to complete workshops with regulators on consent conditions and related management plans. Consequently, the Company expects a final decision from the Expert Panel by December 17, 2026. During the recent Expert Hearings, the Panel indicated they would provide a draft decision at least one month prior to the final decision.지급의 안정성과 성장배당 데이터 가져오는 중안정적인 배당: 과거에 8MM 의 주당 배당금이 안정적이었는지 판단하기에는 데이터가 부족합니다.배당금 증가: 8MM 의 배당금 지급이 증가했는지 판단하기에는 데이터가 부족합니다.배당 수익률 vs 시장Santana Minerals 배당 수익률 vs 시장8MM의 배당 수익률은 시장과 어떻게 비교되나요?구분배당 수익률회사 (8MM)n/a시장 하위 25% (DE)1.5%시장 상위 25% (DE)4.7%업계 평균 (Metals and Mining)1.5%분석가 예측 (8MM) (최대 3년)n/a주목할만한 배당금: 회사가 최근 지급을 보고하지 않았기 때문에 하위 25%의 배당금 지급자에 대해 8MM 의 배당 수익률을 평가할 수 없습니다.고배당: 회사가 최근 지급을 보고하지 않았기 때문에 배당금 지급자의 상위 25%에 대해 8MM 의 배당 수익률을 평가할 수 없습니다.주주 대상 이익 배당수익 보장: 배당금 지급이 수익으로 충당되는지 확인하기 위해 8MM 의 지급 비율을 계산하기에는 데이터가 부족합니다.주주 현금 배당현금 흐름 범위: 8MM 에서 지급을 보고하지 않았기 때문에 배당 지속 가능성을 계산할 수 없습니다.높은 배당을 제공하는 우량 기업 찾기7D1Y7D1Y7D1YDE 시장에서 배당이 강한 기업.View Management기업 분석 및 재무 데이터 상태데이터최종 업데이트 (UTC 시간)기업 분석2026/08/19 14:53종가2026/08/19 00:00수익2025/12/31연간 수익2025/06/30데이터 소스당사의 기업 분석에 사용되는 데이터는 S&P Global Market Intelligence LLC에서 제공됩니다. 아래 데이터는 이 보고서를 생성하기 위해 분석 모델에서 사용됩니다. 데이터는 정규화되므로 소스가 제공된 후 지연이 발생할 수 있습니다.패키지데이터기간미국 소스 예시 *기업 재무제표10년손익계산서현금흐름표대차대조표SEC 양식 10-KSEC 양식 10-Q분석가 컨센서스 추정치+3년재무 예측분석가 목표주가분석가 리서치 보고서Blue Matrix시장 가격30년주가배당, 분할 및 기타 조치ICE 시장 데이터SEC 양식 S-1지분 구조10년주요 주주내부자 거래SEC 양식 4SEC 양식 13D경영진10년리더십 팀이사회SEC 양식 10-KSEC 양식 DEF 14A주요 개발10년회사 공시SEC 양식 8-K* 미국 증권에 대한 예시이며, 비(非)미국 증권에는 해당 국가의 규제 서식 및 자료원을 사용합니다.별도로 명시되지 않는 한 모든 재무 데이터는 연간 기간을 기준으로 하지만 분기별로 업데이트됩니다. 이를 TTM(최근 12개월) 또는 LTM(지난 12개월) 데이터라고 합니다. 자세히 알아보기.분석 모델 및 스노우플레이크이 보고서를 생성하는 데 사용된 분석 모델의 세부 정보는 당사의 GitHub 페이지에서 확인하실 수 있습니다. 또한 보고서 사용 방법에 대한 가이드와 YouTube 튜토리얼도 제공하고 있습니다.Simply Wall St 분석 모델을 설계하고 구축한 세계적 수준의 팀에 대해 알아보세요.산업 및 섹터 지표산업 및 섹터 지표는 Simply Wall St가 6시간마다 계산하며, 프로세스에 대한 자세한 내용은 Github에서 확인할 수 있습니다.분석가 소스Santana Minerals Limited는 9명의 분석가가 다루고 있습니다. 이 중 3명의 분석가가 우리 보고서에 입력 데이터로 사용되는 매출 또는 수익 추정치를 제출했습니다. 분석가의 제출 자료는 하루 종일 업데이트됩니다.분석가기관Chris SavageBell PotterDavid CoatesBell PotterTim McCormackCanaccord Genuity6명의 분석가 더 보기
공고 • Jul 27Santana Minerals Limited Reports Outstanding Bonanza Gold Hits from RAS Stage 1 AreaSantana Minerals Limited has received outstanding results from within the high-grade core of the Rise and Shine (RAS) orebody, which contains the bulk of the deposit's ounces. Infill hole MDD528 has reduced spacing to 20m from the nearest holes and returned a bonanza intercept of 24.4m @ 10.9 g/t Au from 165.7m (true width 20.2m). Two additional sub-parallel intercepts of a second, stacked zone deeper in the hole returned 2.0m @ 89.5 g/t Au from 197m (true width 1.7m) with abundant visible gold, and 3.0m @ 2.5 g/t Au from 207m (true width 2.5m). This hole significantly improves the grade over the previous model with wider spaced drilling. The deeper zone of 2.0m @ 89.5g/t confirms the sub-parallel trend of a high-grade zone that can be accessed from the open pit. Two other infill holes, MDD526 and MDD527, returned intercepts consistent with previous drilling, confirming the continuity of mineralisation projected from the wider-spaced drill pattern and increasing confidence in the first ore scheduled to be mined. MDD526 returned 2.0m @ 8.5 g/t Au from 172m (true width 1.8m), and 10.0m @ 2.9 g/t Au from 179m (true width 9.0m). MDD527 returned 5.0m @ 1.3 g/t Au from 176m (true width 4.9m), and 11.0m @ 1.0 g/t Au from 188m (true width 10.8m). The results presented above are from drilling samples collected by diamond drilling. Diamond drill (DD) core samples for laboratory assay are typically 1 metre samples of diamond saw cut ½ diameter core. Where distinct mineralisation boundaries are logged, sample lengths are adjusted to the respective geological contact. Fire Assay: Samples are crushed at the receiving laboratory to minus 2mm (85% passing) and split using a rotary splitter to provide 1kg for pulverising in a ring mill to -75um. Pulps are fire assayed (FAA) using a 50g charge with AAS finish. Certified standards, blanks and field replicates are inserted with the original batches at a frequency of ~5% each for QAQC purposes. Photon Assay: Samples are crushed at the receiving laboratory to 3.5mm using a jaw crusher and split using a linear sample divider to provide a 500g sample. The 500g sample is assayed via a Chrysos Photon Assay unit. Certified standards, blanks and field replicates are inserted with the original batches at a frequency of ~5% each for QAQC purposes. Blank material is inserted after samples with notable visible gold to assess for carryover contamination. All pulps and crush reject (CREJ) are returned from the laboratory to MGL for storage on site. Of these returned samples, a further ~5% are re-submitted as QC check samples which involve pulp FAA re-assays by the original and an umpire laboratory and CREJ re-assayed by 500-gram (+ & -75mu) screen fire assay (SFA), 1kg BLEG (LeachWELL) and 2*500-gram Photon analysis (PHA) for gold. Where multiple assays exist for a single sample interval, larger samples are ranked in the database: PHA > BLEG > SFA > FAA. All returned pulps are analysed for a suite of 31 elements by portable XRF (pXRF). The sampling, sub-sampling and assaying methods are appropriate to the geology and mineralisation of the RAS deposit. Current drilling techniques are diamond coring (DD) PQ3 and HQ3 size triple tube. Where PQ3 core size (83mm diameter) is commenced this is maintained throughout the DD hole until drilling conditions dictate reduction in size to HQ3 core (61mm diameter). Holes deeper than 750m are cased off to NQ3 (45mm diameter). DD pre-collars are drilled open hole through un-mineralised TZ3 schist to within about 15 m of the mineralisation hangingwall, at which point diamond coring commences. RC drilling is only carried out where the mineralisation target is less than about 150m downhole and used a face sample bit with sample collected in a cyclone mounted over a rotary splitter producing 2 x 30% splits and 1 x 40% split. The two 30% splits were used as primary sample and field duplicate (if submitted) with the 40% split used for logging and then stored at the MGL core yard. Drillholes are oriented to intersect known mineralised features in a nominally perpendicular orientation as much as is practicable. A small number of holes are oriented in other directions to resolve areas of ambiguous geological interpretation. All drill core is oriented to assist with interpretation of mineralisation and structure using a Trucore orientation tool. DD core sample recoveries are recorded by the drillers at the time of drilling by measuring the actual distance of the drill run against the actual core recovered. The measurements are checked by the site geologist. When poor core recoveries are recorded the site geologist and driller endeavour to immediately rectify any problems to maintain maximum core recoveries. DD core logging to date indicate ~96% recoveries. RC sample recovery is measured as sample weight recovered. RC sample moisture for all RC drilling data was logged as dry (83.7% of RC samples), moist (12.0%) or wet (4.3%). All samples logged as wet were omitted from use in mineral resource estimation. The drilling contract used states for any given run, a level of recovery is required otherwise financial penalties are applied to the drill contractor to ensure sample recovery priority along with production performance. Sample grades were plotted against drilling recovery by drilling method and no relationship was established. Wet RC samples do show higher grades than dry RC samples. This may be due to wet RC samples coming from higher grade zones or sampling bias due to the loss of fines in wet samples. Due to a bias being present, wet RC samples are omitted from use in mineral resource estimation. All DD holes have been logged for their entire sampled length below upper open hole drilling (nominally 0-450 metres below collar). Data is recorded directly into AcQuire database with sufficient detail to support a Mineral Resource estimation (MRE). Logging is mostly qualitative but there are estimations of quartz and sulphide content and quantitative records of geological /structural unit, oxidation state and water table boundaries. Oriented DD core allows alpha /beta measurements to determine structural element detail (dip /dip direction) to supplement routine recording of lithologies /alteration /mineralisation /structure /oxidation /colour and other features for MRE reporting, geotechnical and metallurgical studies. All RC chips were sieved and logged for lithology, colour, oxidation, weathering, vein percentage and sulphide minerals. All core is photographed wet and dry before cutting. Sieved RC chips are also photographed. 100% of all relevant (within the gold grade domains) intersections were logged.
공고 • Jul 21Santana Minerals Limited and Matakanui Gold Limited Announce Retirement of Frederick James Leslie Bunting as Non-Executive Director, Effective July 20, 2026Santana Minerals Ltd. announced the retirement of Mr. Frederick (Kim) Bunting as a Non-Executive Director of the Company and its subsidiaries effective 20 July 2026. Mr. Bunting has been a long-term Director of Santana and its wholly owned subsidiary, Matakanui Gold Limited (NZ) for many years and he was the driver of the team that made the Rise and Shine (RAS) discovery at the Bendigo-Ophir Gold Project.
Recent Insider Transactions • Jul 09Insider recently bought €430k worth of stockOn the 8th of July, Peter Cook bought around 2m shares on-market at roughly €0.27 per share. This transaction amounted to 16% of their direct individual holding at the time of the trade. This was the largest purchase by an insider in the last 3 months. Insiders have collectively bought €441k more in shares than they have sold in the last 12 months.
공고 • Jul 08Santana Minerals Limited Reports High-Grade Gold Infill Drill Results Support Early-Stage Mine PlanSantana Minerals Limited has returned high-grade gold intercepts from an infill drilling campaign designed to close up drill hole spacing in the southern area of the Rise and Shine (R S) deposit, where early-stage open pit mining is planned. These results are from the first four holes of a 12-hole program aimed at confirming the position of pre-production mining to deliver a consistent ore feed at planned processing rates. Strong intercepts from MDD504 and MDD524 confirm the tenor of the thick high-grade mineralised domain (HG1) in the upper Rise and Shine Shear Zone (RSSZ), with MDD504 also intercepting an additional zone of high-grade mineralisation beneath the HG1 in the domain currently classified as low-grade (LG1). MDD525 lower intercepts reinforce the continuity of stacked mineralised zones in the south of R S. The southern margin of the high-grade domain has been confirmed by fringe hole MDD523. Significant intercepts include: MDD504: 15.5m @ 7.7g/t Au from 185.0m (true width 12.2m), and 4.2m @ 14.5g/t Au from 211.8m (true width 3.3m); MDD524A: 7.0m @ 6.4g/t Au from 181.1m (true width 6.6m); MDD525: 6.7m @ 2.0g/t Au from 165.4m (true width 5.7m), 6.0m @ 1.9g/t Au from 175.0m (true width 5.2m), and 9.0m @ 3.9g/t Au from 184.0m (true width 7.8m); MDD523: 4.0m @ 0.8g/t Au from 157.0m (true width 4.0m). Drilling has further refined the understanding of the southern R S HG1 high-grade mineralised domain. Assay results from MDD504 and MDD524 confirm the continuity of HG1, with MDD504 intercept of similar thickness to adjacent drill holes but at a significantly higher-grade than modelled. MDD504 also intersected an additional high-grade zone of 4.2m at 14.5g/t Au beneath HG1 within the interpreted LG1 domain. This interval is interpreted to correlate with a comparable intercept in MDD382 to the east (6.0m at 11.9g/t Au), also modelled within LG1, suggesting the potential presence of a second stacked high-grade lens that will be evaluated during future geological modelling. The infill drill program is continuing with eight additional drill holes to be completed, aimed at closing hole spacing in areas targeted for early ore production. Mine plans are currently being refined ahead of advanced financing activities scheduled to be completed within three months of fast-track approval consents.
공고 • Jul 04Santana Minerals Ltd Files Memorandum with the EPA Requesting the Processing of the BOGP FTA Application Be Resumed on August 17, 2026Santana Minerals Ltd. has filed a memorandum with the EPA requesting that the processing of the BOGP FTA application be resumed on August 17, 2026. This allows for a total processing pause of 35 working days to reply to the Expert Panel’s Request for Further Information 11 (RFI) issued on June 25, 2026 and to complete workshops with regulators on consent conditions and related management plans. Consequently, the Company expects a final decision from the Expert Panel by December 17, 2026. During the recent Expert Hearings, the Panel indicated they would provide a draft decision at least one month prior to the final decision.