View Financial HealthAurbis Resources 배당 및 자사주 매입배당 기준 점검 0/6Aurbis Resources 배당금을 지급한 기록이 없습니다.핵심 정보n/a배당 수익률n/a자사주 매입 수익률총 주주 수익률n/a미래 배당 수익률n/a배당 성장률n/a다음 배당 지급일n/a배당락일n/a주당 배당금n/a배당 성향n/a최근 배당 및 자사주 매입 업데이트업데이트 없음모든 업데이트 보기Recent updates공시 • 5hAurbis Resources Corp. Announces the First Phase of Mapping and Rock Sampling Has Been Completed on the Ecru Gold ProjectAurbis Resources Corp. announced that the first phase of mapping and rock sampling (P1) has been completed on the Ecru Gold Project, held by Aurbis Resources in Lander County, Nevada. The mapping project identified several Robertson-Style characteristics in an area interpreted as the contact aureole of the Ecru intrusion. These characteristics included areas of intense hornfelsing, brecciation, and silicification, all of which are associated with the Robertson-Style intrusion-related gold mineralisation. Robertson-Style mineralization is named for the Robertson deposit just 2 km away from Ecru. This 2.7- million-ounce gold discovery was acquired by Barrick in 2017 and is now headed to production under Nevada Gold Mines (Barrick/Newmont) within the famed Cortez Complex, one of the richest gold trends in the world. The P1 mapping program focused on the southwestern portion of the Ecru project, where outcrop exists. About 150 rock samples were also collected during this phase of work and will be submitted to the analytical laboratory in Reno, Nevada. The mapping and sampling program is aimed to better understand the alteration assemblage of the Ecru Gold Project in relation to the Robertson-Style intrusion-related gold mineralisation. The rock samples will undergo the full mineral suite analyses to support the visual geological mapping interpretations with geochemical data. The program data is being compiled and will be reviewed alongside the sample results. It is likely that a second phase of mapping and rock sampling will be undertaken in the near future. A field mapping and outcrop sampling program was completed on the southwestern portion of the Ecru property, and about 100 rock chip samples were collected. The aim of the mapping and sampling program was to better understand the distribution of alteration assemblages on Ecru, particularly in relation to the interpreted intrusion identified by magnetic surveys. A roughly north-striking fault divides the mapped area into two distinct zones. On the west of the fault, fine grey sandstone of the Elder formation is weakly altered and west-dipping. East of the fault, the rocks are intensely altered and south-dipping. East of the fault, a long exposure of brecciated, hornfelsed, interbedded Elder formation shows evidence of multiple phases of brecciation, where coarse, blocky collapse breccias are cut by strongly silicified, hydrothermal breccia. This hydrothermal breccia style was observed across multiple units over a wide area.Board Change • May 20Less than half of directors are independentFollowing the recent departure of a director, there are only 2 independent directors on the board. The company's board is composed of: 2 independent directors. 3 non-independent directors. Independent Director Ed Low was the last independent director to join the board, commencing their role in 2023. The company's minority of independent directors is a risk according to the Simply Wall St Risk Model.공시 • Mar 05Québec Nickel Corp. announced that it expects to receive CAD 1 million in fundingQuébec Nickel Corp. announced a non-brokered private placement of 4,000,000 units at a price of CAD 0.25 per unit for gross proceeds of up to CAD 1,000,000.00 on March 4, 2026. Each unit will consist of one Common Share And One Common Share Purchase Warrant. Each warrant will entitle the holder to acquire one additional common share at an exercise price of CAD 0.40 for a period of two years from the date of issuance. The offering is subject to customary conditions, including approval of the Canadian securities exchange and other required regulatory approvals. All securities issued pursuant to the offering will be subject to a statutory hold period of four months and one day in accordance with applicable securities laws. The company may pay finders’ fees in connection with the offering in accordance with applicable securities laws and exchange policies.공시 • Jan 17Québec Nickel Corp. announced that it has received CAD 0.5 million in fundingOn January 16, 2026, Québec Nickel Corp. closed the transaction. The company issued 4,000,000 units at a price of CAD 0.125 per Unit for gross proceeds of CAD 500,000. Each Unit consists of one common share of the Company and one-half of one common share purchase warrant. Each whole warrant is exercisable to acquire one additional common share of the Company at an exercise price of CAD 0.225 per share for a period of two years from the date of issuance. The Units were issued pursuant to applicable prospectus exemptions, including the family, friends and business associates exemption, the accredited investor exemption, the existing security holder exemption under British Columbia Instrument 45-534, and equivalent exemptions under applicable Canadian securities laws. In connection with the Offering, the Company paid aggregate cash finder’s fees of CAD 4590.00 in accordance with the policies of the Canadian Securities Exchange and applicable securities legislation. No securities were issued as finder’s compensation. All securities issued in connection with the Offering are subject to a statutory hold period under applicable Canadian securities laws, expiring four months and one day from the date of issuance. The Offering remains subject to final acceptance of the Canadian Securities Exchange.공시 • Jul 16Québec Nickel Corp., Annual General Meeting, Sep 12, 2025Québec Nickel Corp., Annual General Meeting, Sep 12, 2025. Location: british columbia, vancouver Canada공시 • Nov 14Québec Nickel Corp. announced that it has received CAD 0.25 million in fundingOn November 13, 2024, Québec Nickel Corp. closed the transaction. The company announced that it has issued 2,000,000 units at a price of CAD 0.125 per unit for gross proceeds of CAD 250,000. No finders' fees were payable in connection with the offering. No directors or officers participated in the offering.공시 • Oct 26Québec Nickel Corp. announced that it expects to receive CAD 0.25 million in fundingQuébec Nickel Corp. announces a private placement offering of 2,000,000 units at a price of CAD 0.125 per unit for gross proceeds of CAD250,000 on October 25, 2024. Each Unit comprises of one common share nd one-half of one share purchase warrant exercisable for a period of two years. Each whole Warrant is exercisable into one Share at a price of CAD 0.225 per Share. No finder’s fees will be payable in connection with the Offering. The Offering is subject to approval of the Canadian Securities Exchange. Securities issued under the Offering will be subject to a hold period which will expire four months and one day from the date of closing of the Offering.공시 • Jul 16Québec Nickel Corp., Annual General Meeting, Sep 12, 2024Québec Nickel Corp., Annual General Meeting, Sep 12, 2024. Location: suite 1100, 1111 melville street, british columbia, v6e 3v6, vancouver Canada공시 • Feb 03Québec Nickel Corp. Reports Metallurgical Test Program Results from the Fortin Sill Zone at its 100% Owned Ducros Project Near Lebel-Sur-Quévillon, QuébecQuébec Nickel Corp. announced results from the metallurgical test work program completed on Ni-Cu-PGE-rich drill core from the Fortin Sill Zone at its 100% owned Ducros Project near Lebel-sur-Quévillon, Québec. The objective of the scoping-level metallurgical program is to evaluate the amenability of the Fortin Sill Zone to produce saleable Critical Metals-bearing mineral concentrates. The metallurgical study was initiated in 2023 to follow-up on significant drilling results returned from the Fortin Sill Zone including 31.00 metres of 0.37% Ni, 0.40% Cu, 176 ppm Co and 0.55 g/t Pt-Pd-Auin hole QDG-22-09, 43.39 metres of 0.24% Ni, 0.25% Cu, 146 ppm Co and 0.35 g/t Pt-Pd-Au in hole QDG-22-28 and 11.80 metres of 1.44% Ni, 1,49% Cu, 461 ppm Co and 2.79 g/t Pt-Pd-Au in hole QDG-22-29. During the first half of 2023, the Company completed several dedicated HQ-diameter drill holes at the Fortin Sill Zone that supplied fresh material for the test work program. The metallurgical holes were designed to twin previously completed holes and targeted three styles and grades of Ni-Cu-PGE mineralization including: Low grade disseminated and blebby sulphide mineralization with a target average grade of 0.30% nickel + copper; Moderate grade blebby to heavily disseminated mineralization with a target average grade of 0.75% nickel + copper; High-grade net texture to semi-massive mineralization with a target grade of greater than 1.50% nickel + copper. From the metallurgical drilling, three 50-kilogram samples of Ni-Cu-PGE mineralized drill core, each representing one of the styles and target grades of mineralization, were collected and delivered to SGS Canada's Québec City laboratory for the study. Summary of Metallurgical Study Results: Upon preparing a master composite sample from the three variability samples, the four samples were subjected to a metallurgical test program which included amongst other protocols, comminution, floatation and environmental test work. The Bond ball mill grindability test (i.e. comminution), which is used to estimate net power requirements for a potential mill grinding circuit, was performed on the master composite sample. Results from this test show the Fortin Sill Zone rocks are "moderately soft". The results from the floatation test work program demonstrate that the mineralized rocks at theFortin Sill Zone are amenable to producing two distinct mineral concentrates, namely a high-grade copper + gold + palladium concentrate and a moderate grade nickel + cobalt + platinum concentrate. Copper grades ranging from 28.0 to 29.3% Cu at recoveries ranging from 89.2% to 92.9% were achieved from the four samples. The nickel concentrate grades were relatively low at about 5% Ni for the four samples tested. Nickel recoveries improved significantly from the batch tests and ranged from a low of 48.2% in the low-grade sample to 77.5% in the high-grade sample.A subsample of the combined tailings from the four locked cycle tests was submitted for basic environmental characterization including leachable metals and acid base accounting (ABA). Environmental characterization of the combined tails did not identify any notable leachable metalsbut found the sample to be possibly acid generating.Board Change • Dec 27Less than half of directors are independentFollowing the recent departure of a director, there are only 2 independent directors on the board. The company's board is composed of: 2 independent directors. 3 non-independent directors. Independent Director Nominee Christine Petch was the last independent director to join the board, commencing their role in 2022. The company's minority of independent directors is a risk according to the Simply Wall St Risk Model.공시 • Dec 13Québec Nickel Corp. Completes 2023 Exploration Programs at Its Ducros Nickel-Copper-PGE ProjectQuebec Nickel Corp. reported the completion of its 2023 exploration programs at its 100% owned Ducros Property, located 85 kilometers northeast of Val-d'Or, Quebec. Summary of 2023 Work Programs & Results: Drilling of almost 18,000 metres in 50 holes across the Ducros Property; Scoping-level metallurgical study of Fortin Sill Zone Ni-Cu-PGE sulphides; Discovery of multiple large Ni-Co-bearing ultramafic intrusions Numerous new Ni-Cu-PGE targets identified through Artificial Intelligence targeting study; Start of project environmental baseline study work. 2023 Exploration Diamond Drilling: The 2023 drilling program tested a wide variety of prospective Ni-Cu-PGE targets across the entire Ducros Property. In total, 17,815 metres were completed in 50 holes at multiple target areas such as the Ducros Ultramafic Sill Complex (DUSC), the Ducros Sill Trend, the Q-Zone Target as well as at the greater Fortin Sill Zone area. Of note, and as previously announced, two large nickel + cobalt-bearing ultramafic intrusions were discovered at the Ducros Sill Trend and Q-Zone target earlier 2023.공시 • Oct 21Québec Nickel Corp., Annual General Meeting, Dec 19, 2023Québec Nickel Corp., Annual General Meeting, Dec 19, 2023.공시 • Oct 07Quebec Nickel Corp. Reports the Results from an Artificial Intelligence Nickel-Copper-Pge Targeting Exercise At the Company's Ducros ClaimsQuebec Nickel Corp. reported the results from an Artificial Intelligence nickel-sulphide-focused targeting exercise at the Company's Ducros claims which has recently been completed by ALS GoldSpot Discoveries. The geological interpretation of the Ducros Property has been updated to help guide future exploration. In April 2023, QNI retained ALS GoldSpot Discoveries ("ALS GoldSpot") to undertake a comprehensive review and synthesis of the vast amount of exploration data collected at the Ducros Property to date, enhancing ongoing exploration efforts. The objectives of the study were two-fold: firstly, to generate meaningful nickel-sulphide -focused targets across the property using its proprietary SmartT TargetTM AI technology, and secondly, to use the new exploration data to reinterpret the geology underlying the Ducros claims. The unique fingerprint of the Ni-Cu-PGE Fortin Sill Zone was used to train the SmartT TargetTM targeting algorithms. This involved the integration and synthesis of multiple exploration datasets including the recently completed VTEMTM, airborne gravity, high-resolution drone magnetics and Lidar surveys, along with the data from two seasons worth of surface biogeochemical surveys and the Ducros diamond drilling assay, lithogeochemical and geotechnical databases. ALS GoldSpot used its Supervised Learning ("SL") and Semisupervised Learning ("SSL") algorithms on 25-metre and 10-metre datastacks during its study. Of note, several of the new nickel-sulphides, which are characterized as having a geophysical conductive response comparable to that of the Fortin Sill Zone, lie along strike of the Fortin Sill zone, immediately adjacent to the recently discovered Q-Zone, within the southern portion of the Ducros Ultramafic Sill Complex and along strike to the south of the Ducros Sill Trend. As part of the targeting exercise, several new non-conductive large-tonnage nickel-cobalt anomalies were also generated, similar in character to the Q-Zone and Ducros Sill Trend. In parallel with the AI targeting project, ALS GoldSpot also completed a litho-structural reinterpretation of the Ducros Property. Due to the relatively thick and consistent blanket of surface cover at the property, the new geological interpretation leans heavily on short wavelength airborne magnetic data in combination with the growing Ducros drillhole database. It is expected this new geological interpretation will greatly enhance the Company's exploration efforts going forward by allowing future work programs to focus on the most prospective Ni-Cu-PGE targets within the large >15,000-hectare Ducros property. As announced on August 9, 2023, the Company reports the program of exploration drilling and down-hole geophysics at the Fortin Sill target area continues as planned. The new drilling at Fortin Sill is focused on exploring for additional Ni-Cu-PGE sulphides down-plunge and along strike of the main outcropping mineralized showing. Up to 5,000 metres of drilling is planned for this phase of work, which will explore at depth beneath the Ni-Cu-PG E Zone as well as more than two kilometers of strike length of prospective geology. ALS GoldSpot offers unique processes to focus exploration efforts, minimize client risk related to exploration targeting, and optimize aspects of conventional resource exploration workflows. Its diverse geoscience and data science technical teams combine proprietary technology with in-depth expertise in mineral exploration, mineral resources, and mining to offer robust and actionable solutions to its clients and partners. While mineral exploration and mining have become data-rich environments, the value of data is lost when datasets become so large that they cannot effectively be integrated into decision making. Its expertise and solutions target such big data problems, processing or integrating underutilized data to better understand resource property potential.공시 • Sep 13Quebec Nickel Corp. Discovers New Large Nickel + Cobalt-Bearing Ultramafic Intrusion at DucrosQuebec Nickel Corp. reported drilling assay results from its Ducros Ni-Co-Cu-PGE project, located 85 kilometers northeast of Val-d'Or, Quebec. Results discussed herein come from multiple drill holes completed at the southern margin of the large 25 square kilometer Ducros Gabbro target this spring. The newly discovered nickel and cobalt-bearing ultramafic intrusion, now referred to as the "Q-Zone", has a surface geophysical footprint of approximately two square kilometers. Previous exploration conducted in the Q-Zone target area is limited to a single 145-metre-long hole drilled in57 that encountered mostly gabbroic rocks. In addition to this lone drill hole, Quebec Nickel completed a till sampling program during the spring of 2021 approximately two kilometers west of the Q-Zone target. Hole QDG-23-301 was collared to the test a portion of the southern lobe of the Q-Zone magnetic anomaly. The hole encountered a thick succession of intercalated mafic, ultramafic and sedimentary rock units with multiple narrow intervals of gabbronorite and serpentinized dunite. No significant assay results were returned from this hole. QDG-23-303 was drilled towards the northwest to test the southern lobe magnetic high and encountered ultramafic intrusive rocks throughout most of its 351-metre length (weakly to moderately serpentinized peridotite to dunite). Assay results for this hole include 0.17% nickel and 114 ppm cobalt over 322.77 metres and includes a 52.50 metre interval of 0.20% Ni + 115 ppm Co at the bottom of the hole. Hole QDG- 23-304 was collared approximately 800 metres northeast of QDG-23- 303 and was drilled towards the southeast to evaluate the margin of the Q-Zone central lobe magnetic anomaly. The 315-metre-long hole drilling through a mixed package of felsic to intermediate and mafic dykes, including quartz monzonite and gabbro until 242 metres depth after which the hole cored through 75 metres of mafic volcanic country rock. No significant assay results were return from this hole. QD Gabbro was directed towards the northwest to test the central lobe of the Q-Zone Magnetic high. After collaring in sedimentary rocks at 42 metres hole depth, QDG-23-306 encountered 40 metres of gabbro before cored a 475-metre-long interval of variably altered ultramafic rocks (dunite). Assay results from this hole are highlighted by 0.22% Ni + 122 ppm Co over the final 164.50 metres of the hole. Hole Q DG-23-307 was collared 275 metres northwest of QDG-23 - and also drilled towards the northwest to locate the contact between the ultramafic intrusion and surrounding host country rocks. Assays are pending for this hole however results are expected to be in-line with the results from the holes drilled immediately to the south. A drill section summarizing the results of holes QDG-23-304, 306 & 307 at the Q-Zone's central lobe magnetic high is shown as Figure 3 and a summary of all assay results from the Q-Zone drilling can be found below as Table 1. These drilling results in combination with the modeled geophysical fingerprint of the target area indicate the Q-Zone spans approximately two kilometres in a northeast-southwest direction by about one kilometer in width. Drill core is collected by Ducros Project personnel daily from the drill rigs and transported in secured core boxes to QNI's core logging facilities in Lebel-sur-Quevillon. Analysis for precious metals, and the Q-Zone targets are expected to be used to test the Q-Zone target area.공시 • Aug 10Québec Nickel Resumes Drilling At Fortin Sill Nickel-Copper-Pge ZoneQuébec Nickel Corp. announced the Company has resumed exploration at its Ducros Ni-Co-Cu-PGE project, located 85 kilometers northeast of Val-d’Or, Québec, including the start of drilling at the Fortin Sill Ni-Cu-PGE Zone. On June 6, 2023, the Company announced that due to an emergency order from the Québec Ministère des Ressources naturelles et des Forêts (Ministry of Natural Resources and Forests) prohibiting access to lands in the province impacted by forest fires, all field-based exploration activities were temporarily suspended at the Ducros Property (see June 6, 2023 News Release). In addition, all project personnel were relocated from the project’s base of operations in Lebel-sur-Quévillon to Val-d’Or upon receiving an evacuation notice on June 2. The work restriction order has since been lifted and the Company has resumed exploration activities at Ducros. Fortin Sill Zone Drilling: During the first half of 2023, exploration drilling by the Company focused on testing targets that require winter conditions to access and drill, notably in the central and western portions of the Ducros claims. Now that the fire related work restrictions have been lifted, exploration has resumed at the highly prospective Fortin Sill Zone where ground conditions allow for year-round access. New drilling at the Fortin Sill Zone will follow-up on some of the exceptional results achieved in 2022, including from hole QDG-22-29, which returned an 11.80 metre interval containing 1.44% Ni, 1.49% Cu, 461 ppm Co and 2.79 g/t Pt-Pd-Au that includes a higher-grade subinterval assaying 1.85% Ni, 1.65% Cu (3.50% Ni + Cu), 576 ppm Co and 3.27 g/t Pt-Pd-Au over 8.43 metres (see August 30, 2022 News Release for reference). Step-out drilling completed later in 2022 discovered additional nickel-copper-PGE mineralization down-plunge from the main sulphide zone including a 4.90-metre-long intercept averaging 0.77% Ni, 0.56% Cu, 340 ppm Co and 0.80 g/t Pt-Pd-Au which includes a higher grade three-metre-long subinterval of1.06% Ni, 0.77% Cu, 447 ppm Co and 1.09 g/t Pt-Pd-Au in hole QDG-22-63 (see March 1, 2023 News Release for more information). The new drilling at Fortin Sill is focused on exploring for additional Ni-Cu-PGE sulphides down plunge and along strike of the main outcropping mineralized zone. Up to 5,000 metres of drilling is planned, which will span more than two kilometers of the strike length of the prospective geology. This work will also test the refined geological model discussed in the Company’s December 15, 2022 news release. Downhole electromagnetic geophysical surveys will be used to vector towards large accumulations of conductive Ni-Cu-PGE sulphides.공시 • Jul 08Québec Nickel Corp., Annual General Meeting, Aug 07, 2023Québec Nickel Corp., Annual General Meeting, Aug 07, 2023.지급의 안정성과 성장배당 데이터 가져오는 중안정적인 배당: 과거에 7IB 의 주당 배당금이 안정적이었는지 판단하기에는 데이터가 부족합니다.배당금 증가: 7IB 의 배당금 지급이 증가했는지 판단하기에는 데이터가 부족합니다.배당 수익률 vs 시장Aurbis Resources 배당 수익률 vs 시장7IB의 배당 수익률은 시장과 어떻게 비교되나요?구분배당 수익률회사 (7IB)n/a시장 하위 25% (DE)1.5%시장 상위 25% (DE)4.7%업계 평균 (Metals and Mining)1.4%분석가 예측 (7IB) (최대 3년)n/a주목할만한 배당금: 회사가 최근 지급을 보고하지 않았기 때문에 하위 25%의 배당금 지급자에 대해 7IB 의 배당 수익률을 평가할 수 없습니다.고배당: 회사가 최근 지급을 보고하지 않았기 때문에 배당금 지급자의 상위 25%에 대해 7IB 의 배당 수익률을 평가할 수 없습니다.주주 대상 이익 배당수익 보장: 배당금 지급이 수익으로 충당되는지 확인하기 위해 7IB 의 지급 비율을 계산하기에는 데이터가 부족합니다.주주 현금 배당현금 흐름 범위: 7IB 에서 지급을 보고하지 않았기 때문에 배당 지속 가능성을 계산할 수 없습니다.높은 배당을 제공하는 우량 기업 찾기7D1Y7D1Y7D1YDE 시장에서 배당이 강한 기업.View Management기업 분석 및 재무 데이터 상태데이터최종 업데이트 (UTC 시간)기업 분석2026/06/17 16:04종가2026/06/17 00:00수익N/A연간 수익N/A데이터 소스당사의 기업 분석에 사용되는 데이터는 S&P Global Market Intelligence LLC에서 제공됩니다. 아래 데이터는 이 보고서를 생성하기 위해 분석 모델에서 사용됩니다. 데이터는 정규화되므로 소스가 제공된 후 지연이 발생할 수 있습니다.패키지데이터기간미국 소스 예시 *기업 재무제표10년손익계산서현금흐름표대차대조표SEC 양식 10-KSEC 양식 10-Q분석가 컨센서스 추정치+3년재무 예측분석가 목표주가분석가 리서치 보고서Blue Matrix시장 가격30년주가배당, 분할 및 기타 조치ICE 시장 데이터SEC 양식 S-1지분 구조10년주요 주주내부자 거래SEC 양식 4SEC 양식 13D경영진10년리더십 팀이사회SEC 양식 10-KSEC 양식 DEF 14A주요 개발10년회사 공시SEC 양식 8-K* 미국 증권에 대한 예시이며, 비(非)미국 증권에는 해당 국가의 규제 서식 및 자료원을 사용합니다.별도로 명시되지 않는 한 모든 재무 데이터는 연간 기간을 기준으로 하지만 분기별로 업데이트됩니다. 이를 TTM(최근 12개월) 또는 LTM(지난 12개월) 데이터라고 합니다. 자세히 알아보기.분석 모델 및 스노우플레이크이 보고서를 생성하는 데 사용된 분석 모델에 대한 자세한 내용은 당사의 Github 페이지에서 확인하실 수 있습니다. 또한 보고서 활용 방법에 대한 가이드와 YouTube 튜토리얼도 제공합니다.Simply Wall St 분석 모델을 설계하고 구축한 세계적 수준의 팀에 대해 알아보세요.산업 및 섹터 지표산업 및 섹터 지표는 Simply Wall St가 6시간마다 계산하며, 프로세스에 대한 자세한 내용은 Github에서 확인할 수 있습니다.분석가 소스Aurbis Resources Corp.는 0명의 분석가가 다루고 있습니다. 이 중 0명의 분석가가 우리 보고서에 입력 데이터로 사용되는 매출 또는 수익 추정치를 제출했습니다. 분석가의 제출 자료는 하루 종일 업데이트됩니다.
공시 • 5hAurbis Resources Corp. Announces the First Phase of Mapping and Rock Sampling Has Been Completed on the Ecru Gold ProjectAurbis Resources Corp. announced that the first phase of mapping and rock sampling (P1) has been completed on the Ecru Gold Project, held by Aurbis Resources in Lander County, Nevada. The mapping project identified several Robertson-Style characteristics in an area interpreted as the contact aureole of the Ecru intrusion. These characteristics included areas of intense hornfelsing, brecciation, and silicification, all of which are associated with the Robertson-Style intrusion-related gold mineralisation. Robertson-Style mineralization is named for the Robertson deposit just 2 km away from Ecru. This 2.7- million-ounce gold discovery was acquired by Barrick in 2017 and is now headed to production under Nevada Gold Mines (Barrick/Newmont) within the famed Cortez Complex, one of the richest gold trends in the world. The P1 mapping program focused on the southwestern portion of the Ecru project, where outcrop exists. About 150 rock samples were also collected during this phase of work and will be submitted to the analytical laboratory in Reno, Nevada. The mapping and sampling program is aimed to better understand the alteration assemblage of the Ecru Gold Project in relation to the Robertson-Style intrusion-related gold mineralisation. The rock samples will undergo the full mineral suite analyses to support the visual geological mapping interpretations with geochemical data. The program data is being compiled and will be reviewed alongside the sample results. It is likely that a second phase of mapping and rock sampling will be undertaken in the near future. A field mapping and outcrop sampling program was completed on the southwestern portion of the Ecru property, and about 100 rock chip samples were collected. The aim of the mapping and sampling program was to better understand the distribution of alteration assemblages on Ecru, particularly in relation to the interpreted intrusion identified by magnetic surveys. A roughly north-striking fault divides the mapped area into two distinct zones. On the west of the fault, fine grey sandstone of the Elder formation is weakly altered and west-dipping. East of the fault, the rocks are intensely altered and south-dipping. East of the fault, a long exposure of brecciated, hornfelsed, interbedded Elder formation shows evidence of multiple phases of brecciation, where coarse, blocky collapse breccias are cut by strongly silicified, hydrothermal breccia. This hydrothermal breccia style was observed across multiple units over a wide area.
Board Change • May 20Less than half of directors are independentFollowing the recent departure of a director, there are only 2 independent directors on the board. The company's board is composed of: 2 independent directors. 3 non-independent directors. Independent Director Ed Low was the last independent director to join the board, commencing their role in 2023. The company's minority of independent directors is a risk according to the Simply Wall St Risk Model.
공시 • Mar 05Québec Nickel Corp. announced that it expects to receive CAD 1 million in fundingQuébec Nickel Corp. announced a non-brokered private placement of 4,000,000 units at a price of CAD 0.25 per unit for gross proceeds of up to CAD 1,000,000.00 on March 4, 2026. Each unit will consist of one Common Share And One Common Share Purchase Warrant. Each warrant will entitle the holder to acquire one additional common share at an exercise price of CAD 0.40 for a period of two years from the date of issuance. The offering is subject to customary conditions, including approval of the Canadian securities exchange and other required regulatory approvals. All securities issued pursuant to the offering will be subject to a statutory hold period of four months and one day in accordance with applicable securities laws. The company may pay finders’ fees in connection with the offering in accordance with applicable securities laws and exchange policies.
공시 • Jan 17Québec Nickel Corp. announced that it has received CAD 0.5 million in fundingOn January 16, 2026, Québec Nickel Corp. closed the transaction. The company issued 4,000,000 units at a price of CAD 0.125 per Unit for gross proceeds of CAD 500,000. Each Unit consists of one common share of the Company and one-half of one common share purchase warrant. Each whole warrant is exercisable to acquire one additional common share of the Company at an exercise price of CAD 0.225 per share for a period of two years from the date of issuance. The Units were issued pursuant to applicable prospectus exemptions, including the family, friends and business associates exemption, the accredited investor exemption, the existing security holder exemption under British Columbia Instrument 45-534, and equivalent exemptions under applicable Canadian securities laws. In connection with the Offering, the Company paid aggregate cash finder’s fees of CAD 4590.00 in accordance with the policies of the Canadian Securities Exchange and applicable securities legislation. No securities were issued as finder’s compensation. All securities issued in connection with the Offering are subject to a statutory hold period under applicable Canadian securities laws, expiring four months and one day from the date of issuance. The Offering remains subject to final acceptance of the Canadian Securities Exchange.
공시 • Jul 16Québec Nickel Corp., Annual General Meeting, Sep 12, 2025Québec Nickel Corp., Annual General Meeting, Sep 12, 2025. Location: british columbia, vancouver Canada
공시 • Nov 14Québec Nickel Corp. announced that it has received CAD 0.25 million in fundingOn November 13, 2024, Québec Nickel Corp. closed the transaction. The company announced that it has issued 2,000,000 units at a price of CAD 0.125 per unit for gross proceeds of CAD 250,000. No finders' fees were payable in connection with the offering. No directors or officers participated in the offering.
공시 • Oct 26Québec Nickel Corp. announced that it expects to receive CAD 0.25 million in fundingQuébec Nickel Corp. announces a private placement offering of 2,000,000 units at a price of CAD 0.125 per unit for gross proceeds of CAD250,000 on October 25, 2024. Each Unit comprises of one common share nd one-half of one share purchase warrant exercisable for a period of two years. Each whole Warrant is exercisable into one Share at a price of CAD 0.225 per Share. No finder’s fees will be payable in connection with the Offering. The Offering is subject to approval of the Canadian Securities Exchange. Securities issued under the Offering will be subject to a hold period which will expire four months and one day from the date of closing of the Offering.
공시 • Jul 16Québec Nickel Corp., Annual General Meeting, Sep 12, 2024Québec Nickel Corp., Annual General Meeting, Sep 12, 2024. Location: suite 1100, 1111 melville street, british columbia, v6e 3v6, vancouver Canada
공시 • Feb 03Québec Nickel Corp. Reports Metallurgical Test Program Results from the Fortin Sill Zone at its 100% Owned Ducros Project Near Lebel-Sur-Quévillon, QuébecQuébec Nickel Corp. announced results from the metallurgical test work program completed on Ni-Cu-PGE-rich drill core from the Fortin Sill Zone at its 100% owned Ducros Project near Lebel-sur-Quévillon, Québec. The objective of the scoping-level metallurgical program is to evaluate the amenability of the Fortin Sill Zone to produce saleable Critical Metals-bearing mineral concentrates. The metallurgical study was initiated in 2023 to follow-up on significant drilling results returned from the Fortin Sill Zone including 31.00 metres of 0.37% Ni, 0.40% Cu, 176 ppm Co and 0.55 g/t Pt-Pd-Auin hole QDG-22-09, 43.39 metres of 0.24% Ni, 0.25% Cu, 146 ppm Co and 0.35 g/t Pt-Pd-Au in hole QDG-22-28 and 11.80 metres of 1.44% Ni, 1,49% Cu, 461 ppm Co and 2.79 g/t Pt-Pd-Au in hole QDG-22-29. During the first half of 2023, the Company completed several dedicated HQ-diameter drill holes at the Fortin Sill Zone that supplied fresh material for the test work program. The metallurgical holes were designed to twin previously completed holes and targeted three styles and grades of Ni-Cu-PGE mineralization including: Low grade disseminated and blebby sulphide mineralization with a target average grade of 0.30% nickel + copper; Moderate grade blebby to heavily disseminated mineralization with a target average grade of 0.75% nickel + copper; High-grade net texture to semi-massive mineralization with a target grade of greater than 1.50% nickel + copper. From the metallurgical drilling, three 50-kilogram samples of Ni-Cu-PGE mineralized drill core, each representing one of the styles and target grades of mineralization, were collected and delivered to SGS Canada's Québec City laboratory for the study. Summary of Metallurgical Study Results: Upon preparing a master composite sample from the three variability samples, the four samples were subjected to a metallurgical test program which included amongst other protocols, comminution, floatation and environmental test work. The Bond ball mill grindability test (i.e. comminution), which is used to estimate net power requirements for a potential mill grinding circuit, was performed on the master composite sample. Results from this test show the Fortin Sill Zone rocks are "moderately soft". The results from the floatation test work program demonstrate that the mineralized rocks at theFortin Sill Zone are amenable to producing two distinct mineral concentrates, namely a high-grade copper + gold + palladium concentrate and a moderate grade nickel + cobalt + platinum concentrate. Copper grades ranging from 28.0 to 29.3% Cu at recoveries ranging from 89.2% to 92.9% were achieved from the four samples. The nickel concentrate grades were relatively low at about 5% Ni for the four samples tested. Nickel recoveries improved significantly from the batch tests and ranged from a low of 48.2% in the low-grade sample to 77.5% in the high-grade sample.A subsample of the combined tailings from the four locked cycle tests was submitted for basic environmental characterization including leachable metals and acid base accounting (ABA). Environmental characterization of the combined tails did not identify any notable leachable metalsbut found the sample to be possibly acid generating.
Board Change • Dec 27Less than half of directors are independentFollowing the recent departure of a director, there are only 2 independent directors on the board. The company's board is composed of: 2 independent directors. 3 non-independent directors. Independent Director Nominee Christine Petch was the last independent director to join the board, commencing their role in 2022. The company's minority of independent directors is a risk according to the Simply Wall St Risk Model.
공시 • Dec 13Québec Nickel Corp. Completes 2023 Exploration Programs at Its Ducros Nickel-Copper-PGE ProjectQuebec Nickel Corp. reported the completion of its 2023 exploration programs at its 100% owned Ducros Property, located 85 kilometers northeast of Val-d'Or, Quebec. Summary of 2023 Work Programs & Results: Drilling of almost 18,000 metres in 50 holes across the Ducros Property; Scoping-level metallurgical study of Fortin Sill Zone Ni-Cu-PGE sulphides; Discovery of multiple large Ni-Co-bearing ultramafic intrusions Numerous new Ni-Cu-PGE targets identified through Artificial Intelligence targeting study; Start of project environmental baseline study work. 2023 Exploration Diamond Drilling: The 2023 drilling program tested a wide variety of prospective Ni-Cu-PGE targets across the entire Ducros Property. In total, 17,815 metres were completed in 50 holes at multiple target areas such as the Ducros Ultramafic Sill Complex (DUSC), the Ducros Sill Trend, the Q-Zone Target as well as at the greater Fortin Sill Zone area. Of note, and as previously announced, two large nickel + cobalt-bearing ultramafic intrusions were discovered at the Ducros Sill Trend and Q-Zone target earlier 2023.
공시 • Oct 21Québec Nickel Corp., Annual General Meeting, Dec 19, 2023Québec Nickel Corp., Annual General Meeting, Dec 19, 2023.
공시 • Oct 07Quebec Nickel Corp. Reports the Results from an Artificial Intelligence Nickel-Copper-Pge Targeting Exercise At the Company's Ducros ClaimsQuebec Nickel Corp. reported the results from an Artificial Intelligence nickel-sulphide-focused targeting exercise at the Company's Ducros claims which has recently been completed by ALS GoldSpot Discoveries. The geological interpretation of the Ducros Property has been updated to help guide future exploration. In April 2023, QNI retained ALS GoldSpot Discoveries ("ALS GoldSpot") to undertake a comprehensive review and synthesis of the vast amount of exploration data collected at the Ducros Property to date, enhancing ongoing exploration efforts. The objectives of the study were two-fold: firstly, to generate meaningful nickel-sulphide -focused targets across the property using its proprietary SmartT TargetTM AI technology, and secondly, to use the new exploration data to reinterpret the geology underlying the Ducros claims. The unique fingerprint of the Ni-Cu-PGE Fortin Sill Zone was used to train the SmartT TargetTM targeting algorithms. This involved the integration and synthesis of multiple exploration datasets including the recently completed VTEMTM, airborne gravity, high-resolution drone magnetics and Lidar surveys, along with the data from two seasons worth of surface biogeochemical surveys and the Ducros diamond drilling assay, lithogeochemical and geotechnical databases. ALS GoldSpot used its Supervised Learning ("SL") and Semisupervised Learning ("SSL") algorithms on 25-metre and 10-metre datastacks during its study. Of note, several of the new nickel-sulphides, which are characterized as having a geophysical conductive response comparable to that of the Fortin Sill Zone, lie along strike of the Fortin Sill zone, immediately adjacent to the recently discovered Q-Zone, within the southern portion of the Ducros Ultramafic Sill Complex and along strike to the south of the Ducros Sill Trend. As part of the targeting exercise, several new non-conductive large-tonnage nickel-cobalt anomalies were also generated, similar in character to the Q-Zone and Ducros Sill Trend. In parallel with the AI targeting project, ALS GoldSpot also completed a litho-structural reinterpretation of the Ducros Property. Due to the relatively thick and consistent blanket of surface cover at the property, the new geological interpretation leans heavily on short wavelength airborne magnetic data in combination with the growing Ducros drillhole database. It is expected this new geological interpretation will greatly enhance the Company's exploration efforts going forward by allowing future work programs to focus on the most prospective Ni-Cu-PGE targets within the large >15,000-hectare Ducros property. As announced on August 9, 2023, the Company reports the program of exploration drilling and down-hole geophysics at the Fortin Sill target area continues as planned. The new drilling at Fortin Sill is focused on exploring for additional Ni-Cu-PGE sulphides down-plunge and along strike of the main outcropping mineralized showing. Up to 5,000 metres of drilling is planned for this phase of work, which will explore at depth beneath the Ni-Cu-PG E Zone as well as more than two kilometers of strike length of prospective geology. ALS GoldSpot offers unique processes to focus exploration efforts, minimize client risk related to exploration targeting, and optimize aspects of conventional resource exploration workflows. Its diverse geoscience and data science technical teams combine proprietary technology with in-depth expertise in mineral exploration, mineral resources, and mining to offer robust and actionable solutions to its clients and partners. While mineral exploration and mining have become data-rich environments, the value of data is lost when datasets become so large that they cannot effectively be integrated into decision making. Its expertise and solutions target such big data problems, processing or integrating underutilized data to better understand resource property potential.
공시 • Sep 13Quebec Nickel Corp. Discovers New Large Nickel + Cobalt-Bearing Ultramafic Intrusion at DucrosQuebec Nickel Corp. reported drilling assay results from its Ducros Ni-Co-Cu-PGE project, located 85 kilometers northeast of Val-d'Or, Quebec. Results discussed herein come from multiple drill holes completed at the southern margin of the large 25 square kilometer Ducros Gabbro target this spring. The newly discovered nickel and cobalt-bearing ultramafic intrusion, now referred to as the "Q-Zone", has a surface geophysical footprint of approximately two square kilometers. Previous exploration conducted in the Q-Zone target area is limited to a single 145-metre-long hole drilled in57 that encountered mostly gabbroic rocks. In addition to this lone drill hole, Quebec Nickel completed a till sampling program during the spring of 2021 approximately two kilometers west of the Q-Zone target. Hole QDG-23-301 was collared to the test a portion of the southern lobe of the Q-Zone magnetic anomaly. The hole encountered a thick succession of intercalated mafic, ultramafic and sedimentary rock units with multiple narrow intervals of gabbronorite and serpentinized dunite. No significant assay results were returned from this hole. QDG-23-303 was drilled towards the northwest to test the southern lobe magnetic high and encountered ultramafic intrusive rocks throughout most of its 351-metre length (weakly to moderately serpentinized peridotite to dunite). Assay results for this hole include 0.17% nickel and 114 ppm cobalt over 322.77 metres and includes a 52.50 metre interval of 0.20% Ni + 115 ppm Co at the bottom of the hole. Hole QDG- 23-304 was collared approximately 800 metres northeast of QDG-23- 303 and was drilled towards the southeast to evaluate the margin of the Q-Zone central lobe magnetic anomaly. The 315-metre-long hole drilling through a mixed package of felsic to intermediate and mafic dykes, including quartz monzonite and gabbro until 242 metres depth after which the hole cored through 75 metres of mafic volcanic country rock. No significant assay results were return from this hole. QD Gabbro was directed towards the northwest to test the central lobe of the Q-Zone Magnetic high. After collaring in sedimentary rocks at 42 metres hole depth, QDG-23-306 encountered 40 metres of gabbro before cored a 475-metre-long interval of variably altered ultramafic rocks (dunite). Assay results from this hole are highlighted by 0.22% Ni + 122 ppm Co over the final 164.50 metres of the hole. Hole Q DG-23-307 was collared 275 metres northwest of QDG-23 - and also drilled towards the northwest to locate the contact between the ultramafic intrusion and surrounding host country rocks. Assays are pending for this hole however results are expected to be in-line with the results from the holes drilled immediately to the south. A drill section summarizing the results of holes QDG-23-304, 306 & 307 at the Q-Zone's central lobe magnetic high is shown as Figure 3 and a summary of all assay results from the Q-Zone drilling can be found below as Table 1. These drilling results in combination with the modeled geophysical fingerprint of the target area indicate the Q-Zone spans approximately two kilometres in a northeast-southwest direction by about one kilometer in width. Drill core is collected by Ducros Project personnel daily from the drill rigs and transported in secured core boxes to QNI's core logging facilities in Lebel-sur-Quevillon. Analysis for precious metals, and the Q-Zone targets are expected to be used to test the Q-Zone target area.
공시 • Aug 10Québec Nickel Resumes Drilling At Fortin Sill Nickel-Copper-Pge ZoneQuébec Nickel Corp. announced the Company has resumed exploration at its Ducros Ni-Co-Cu-PGE project, located 85 kilometers northeast of Val-d’Or, Québec, including the start of drilling at the Fortin Sill Ni-Cu-PGE Zone. On June 6, 2023, the Company announced that due to an emergency order from the Québec Ministère des Ressources naturelles et des Forêts (Ministry of Natural Resources and Forests) prohibiting access to lands in the province impacted by forest fires, all field-based exploration activities were temporarily suspended at the Ducros Property (see June 6, 2023 News Release). In addition, all project personnel were relocated from the project’s base of operations in Lebel-sur-Quévillon to Val-d’Or upon receiving an evacuation notice on June 2. The work restriction order has since been lifted and the Company has resumed exploration activities at Ducros. Fortin Sill Zone Drilling: During the first half of 2023, exploration drilling by the Company focused on testing targets that require winter conditions to access and drill, notably in the central and western portions of the Ducros claims. Now that the fire related work restrictions have been lifted, exploration has resumed at the highly prospective Fortin Sill Zone where ground conditions allow for year-round access. New drilling at the Fortin Sill Zone will follow-up on some of the exceptional results achieved in 2022, including from hole QDG-22-29, which returned an 11.80 metre interval containing 1.44% Ni, 1.49% Cu, 461 ppm Co and 2.79 g/t Pt-Pd-Au that includes a higher-grade subinterval assaying 1.85% Ni, 1.65% Cu (3.50% Ni + Cu), 576 ppm Co and 3.27 g/t Pt-Pd-Au over 8.43 metres (see August 30, 2022 News Release for reference). Step-out drilling completed later in 2022 discovered additional nickel-copper-PGE mineralization down-plunge from the main sulphide zone including a 4.90-metre-long intercept averaging 0.77% Ni, 0.56% Cu, 340 ppm Co and 0.80 g/t Pt-Pd-Au which includes a higher grade three-metre-long subinterval of1.06% Ni, 0.77% Cu, 447 ppm Co and 1.09 g/t Pt-Pd-Au in hole QDG-22-63 (see March 1, 2023 News Release for more information). The new drilling at Fortin Sill is focused on exploring for additional Ni-Cu-PGE sulphides down plunge and along strike of the main outcropping mineralized zone. Up to 5,000 metres of drilling is planned, which will span more than two kilometers of the strike length of the prospective geology. This work will also test the refined geological model discussed in the Company’s December 15, 2022 news release. Downhole electromagnetic geophysical surveys will be used to vector towards large accumulations of conductive Ni-Cu-PGE sulphides.
공시 • Jul 08Québec Nickel Corp., Annual General Meeting, Aug 07, 2023Québec Nickel Corp., Annual General Meeting, Aug 07, 2023.