공시 • 1h
Provenance Gold Reports Assay Results from 2025 Core Drilling Program At Eldorado West Project
Provenance Gold Corp. announced assay results from the final three diamond drill holes (EC-07, EC-08, and EC-09) of the 2025 core drilling program at its Eldorado West Project in Eastern Oregon. These results represent the conclusion of the assays for the 2025 core drilling campaign, which totaled 2,023.4 metres. EC-09 intersected 1.82 grams per tonne ("g/t") Au over 116.74m, including 2.14 g/t Au over 14.78m and 4.70 g/t Au over 25.60m including 8.31 g/t Au over 12.34m. The main zone is flanked by additional modest grade intervals assaying 0.32 g/t Au over 3.35m and 0.32 g/t Au over 19.66m, suggesting that multiple mineralized zones exist in parallel. Mineralization persisting beyond the main interval suggests vertical continuity and the system remains open at depth. EC-08 intersected 0.46 g/t Au over 38.86m hosted in altered and brecciated diorite. EC-08 targeted a previously undrilled area south of Zone 2, identifying a new zone of mineralization. Hole EC-07 was drilled to test an area east of the previous exploration extent and well south of the Herman Area. Hole EC-08 tested an area not drilled historically and uncovered significant intervals of gold mineralization which may expand the system much further south of the Tyee Area. Hole EC-09 was important in terms of increasing understanding of continuity in the Herman Area and delivered another very strong drill hole, with mineralization persisting beyond the main interval suggesting vertical continuity. Both the Herman and Tyee Areas continue to exhibit robust mineralization, remaining open in multiple directions. Tyee Area: Hole EC-08 was drilled northeastward, south of Zone 3, to evaluate the southern extension potential below Zones 2 and 3, in an area previously untested by historical or modern drilling. The mineralization intersected is hosted in altered and brecciated diorite, representing the discovery of a potential new mineralized zone. Herman Area: EC-09 intersected 1.82 g/t Au over 116.74m, including 2.14 g/t Au over 14.78m and 4.70 g/t Au over 25.60m including 8.31 g/t Au over 12.34m from 191m and is hosted in altered and brecciated diorite and metasediments. EC-09 was positioned to confirm the horizontal and vertical continuity of the high-grade zone at Herman, with holes EC-04, EC-05, EC-06 and EC-09 helping to expand the mineralized footprint at Herman significantly. The Herman Area remains open in multiple directions. EC-07, drilled to the east, tested an area south of any known mineralization at Herman. The hole stopped short of the targeted mineralized contact zone of the diorite, and consequently mineralization was concentrated in thin stringers within highly altered metamorphic host rock. Table 1. 2025 Diamond Drill Holes Assay Results: EC-07: 233.78-236.83m, 3.05m, 0.39 g/t, Herman; EC-08: 43.89-74.98m, 31.09m, 0.20 g/t, Tyee; and 95.55-108.20m, 12.65m, 0.27 g/t; and 210.77-249.63m, 38.86m, 0.46 g/t; EC-09: 103.33-106.68m, 3.35m, 0.32 g/t, Herman; and 147.37-149.96m, 2.59m, 0.35 g/t; and 191.72-308.85m, 116.74m, 1.82 g/t, including 241.25-256.03m, 14.78m, 2.14 g/t; and 268.68-294.28m, 25.60m, 4.70 g/t, including 281.94-294.28m, 12.34m, 8.31 g/t; and 322.33-341.99m, 19.66m, 0.32 g/t. Previously Released: EC-04: 4.27-24.38m, 20.12m, 0.51 g/t, Herman; and 33.83-117.65m, 83.82m, 2.18 g/t, including 39.78-48.92m, 9.14m, 4.24 g/t, including 47.24-48.92m, 1.68m, 18.19 g/t, including 53.95-54.86m, 0.91m, 39.61 g/t, including 67.67-78.79m, 11.13m, 3.90 g/t, including 68.88-69.95m, 1.07m, 22.62 g/t, and 75.74-77.27m, 1.53m, 5.02 g/t, including 102.72-104.24m, 1.52m, 20.25 g/t, and 176.94-186.54m, 9.60m, 0.32 g/t, and 231.19-236.83m, 5.64m, 0.37 g/t; EC-05: 3.20-49.68m, 46.48m, 0.70 g/t, Herman, including 39.32-47.09m, 7.77m, 1.97 g/t, and 68.73-115.21m, 46.48m, 0.36 g/t, and 119.18-129.69m, 10.52m, 1.82 g/t, including 124.11-125.27m, 1.52m, 8.73 g/t, and 135.03-178.61m, 43.59m, 0.40 g/t, including 145.39-153.62m, 8.23m, 1.02 g/t, and 187.15-201.69m, 14.54m, 0.26 g/t, and 207.72-222.20m, 14.48m, 0.36 g/t, and 274.32-279.50m, 5.18m, 0.48 g/t, and 301.45-305.87m, 4.42m, 0.51 g/t; EC-06: 1.68-140.82m, 139.14m, 1.10 g/t, Herman, including 25.45-50.35m, 24.90m, 2.68 g/t, including 27.58-33.53m, 5.94m, 6.15 g/t, and 40.69-43.68m, 2.99m, 4.07 g/t, including 86.72-95.86m, 9.14m, 1.72 g/t, and 103.81-113.84m, 10.03m, 1.99 g/t, including 128.02-128.63m, 0.61m, 10.29 g/t, and 152.40-177.24m, 24.84m, 0.52 g/t, and 256.95-260.45m, 3.51m, 2.49 g/t, and 326.14-330.56m, 4.42m, 0.58 g/t. All reported intervals in this news release are downhole core lengths. True widths of mineralized intervals are not known at this time. Geological modelling is ongoing, and additional drilling will be required to establish the geometry and orientation of the mineralized zones in order to determine true thicknesses. There were no known drilling, sampling, recovery, or other factors that could materially affect the accuracy or reliability of the data.