View Future GrowthWIN Metals 과거 순이익 실적과거 기준 점검 0/6WIN Metals 의 수입은 연평균 -60.7%의 비율로 감소해 온 반면, Metals and Mining 산업은 연평균 15.2%의 비율로 증가했습니다. 매출은 연평균 94.3%의 비율로 감소해 왔습니다.핵심 정보-60.66%순이익 성장률-47.07%주당순이익(EPS) 성장률Metals and Mining 산업 성장률22.33%매출 성장률-94.34%자기자본이익률-16.30%순이익률-268,890.80%최근 순이익 업데이트31 Dec 2025최근 과거 실적 업데이트업데이트 없음모든 업데이트 보기Recent updatesBoard Change • May 20Insufficient new directorsNo new directors have joined the board in the last 3 years. The company's board is composed of: No new directors. 4 experienced directors. No highly experienced directors. Independent Non-Executive Chairman Andrew Parker was the last director to join the board, commencing their role in 2021. The company’s insufficient board refreshment is considered a risk according to the Simply Wall St Risk Model.Board Change • May 01Insufficient new directorsNo new directors have joined the board in the last 3 years. The company's board is composed of: No new directors. 4 experienced directors. No highly experienced directors. Independent Non-Executive Chairman Andrew Parker was the last director to join the board, commencing their role in 2021. The company’s insufficient board refreshment is considered a risk according to the Simply Wall St Risk Model.공시 • Feb 03WIN Metals Ltd has completed a Follow-on Equity Offering in the amount of AUD 5.51 million.WIN Metals Ltd has completed a Follow-on Equity Offering in the amount of AUD 5.51 million. Security Name: Ordinary Shares Security Type: Common Stock Securities Offered: 88,216,429 Price\Range: AUD 0.035 Discount Per Security: AUD 0.0021 Security Name: Ordinary Shares Security Type: Common Stock Securities Offered: 68,926,428 Price\Range: AUD 0.035 Discount Per Security: AUD 0.0021 Security Name: Ordinary Shares Security Type: Common Stock Securities Offered: 285,714 Price\Range: AUD 0.035 Transaction Features: Subsequent Direct ListingNew Risk • Dec 28New major risk - Shareholder dilutionThe company's shareholders have been substantially diluted in the past year. Increase in shares outstanding: 56% This is considered a major risk. Shareholder dilution occurs when there is an increase in the number of shares on issue that is not proportionally distributed between all shareholders. Often due to the company raising equity capital or some options being converted into stock. All else being equal, if there are more shares outstanding then each existing share will be entitled to a lower proportion of the company's total earnings, thus reducing earnings per share (EPS). While dilution might not always result in lower EPS (like if the company is using the capital to fund an EPS accretive acquisition) in a lot cases it does, along with lower dividends per share and less voting power at shareholder meetings. Currently, the following risks have been identified for the company: Major Risks Share price has been highly volatile over the past 3 months (19% average weekly change). Earnings have declined by 58% per year over the past 5 years. Shareholders have been substantially diluted in the past year (56% increase in shares outstanding). Revenue is less than US$1m. Minor Risk Market cap is less than US$100m (AU$30.0m market cap, or US$20.1m).Board Change • Dec 24Insufficient new directorsNo new directors have joined the board in the last 3 years. The company's board is composed of: No new directors. 4 experienced directors. No highly experienced directors. Independent Non-Executive Chairman Andrew Parker was the last director to join the board, commencing their role in 2021. The company’s insufficient board refreshment is considered a risk according to the Simply Wall St Risk Model.공시 • Dec 13WIN Metals Ltd has filed a Follow-on Equity Offering in the amount of AUD 5.51 million.WIN Metals Ltd has filed a Follow-on Equity Offering in the amount of AUD 5.51 million. Security Name: Ordinary Shares Security Type: Common Stock Securities Offered: 88,216,429 Price\Range: AUD 0.035 Discount Per Security: AUD 0.0021 Security Name: Ordinary Shares Security Type: Common Stock Securities Offered: 68,926,428 Price\Range: AUD 0.035 Discount Per Security: AUD 0.0021 Security Name: Ordinary Shares Security Type: Common Stock Securities Offered: 285,714 Price\Range: AUD 0.035 Transaction Features: Subsequent Direct Listing공시 • Sep 26WIN Metals Ltd, Annual General Meeting, Nov 26, 2025WIN Metals Ltd, Annual General Meeting, Nov 26, 2025.공시 • Aug 21WIN Metals Ltd has filed a Follow-on Equity Offering in the amount of AUD 2.375292 million.WIN Metals Ltd has filed a Follow-on Equity Offering in the amount of AUD 2.375292 million. Security Name: Ordinary Shares Security Type: Common Stock Securities Offered: 117,514,599 Price\Range: AUD 0.02 Discount Per Security: AUD 0.0012 Security Features: Attached Options Security Name: Ordinary Shares Security Type: Common Stock Securities Offered: 1,250,000 Price\Range: AUD 0.02 Security Features: Attached Options Transaction Features: Subsequent Direct ListingBoard Change • Aug 18Insufficient new directorsNo new directors have joined the board in the last 3 years. The company's board is composed of: No new directors. 4 experienced directors. No highly experienced directors. Independent Non-Executive Chairman Andrew Parker was the last director to join the board, commencing their role in 2021. The company’s insufficient board refreshment is considered a risk according to the Simply Wall St Risk Model.Board Change • Feb 04Insufficient new directorsNo new directors have joined the board in the last 3 years. The company's board is composed of: No new directors. 4 experienced directors. No highly experienced directors. Independent Non-Executive Chairman Andrew Parker was the last director to join the board, commencing their role in 2021. The company’s insufficient board refreshment is considered a risk according to the Simply Wall St Risk Model.New Risk • Jan 04New major risk - Shareholder dilutionThe company's shareholders have been substantially diluted in the past year. Increase in shares outstanding: 85% This is considered a major risk. Shareholder dilution occurs when there is an increase in the number of shares on issue that is not proportionally distributed between all shareholders. Often due to the company raising equity capital or some options being converted into stock. All else being equal, if there are more shares outstanding then each existing share will be entitled to a lower proportion of the company's total earnings, thus reducing earnings per share (EPS). While dilution might not always result in lower EPS (like if the company is using the capital to fund an EPS accretive acquisition) in a lot cases it does, along with lower dividends per share and less voting power at shareholder meetings. Currently, the following risks have been identified for the company: Major Risks Share price has been highly volatile over the past 3 months (17% average weekly change). Earnings have declined by 24% per year over the past 5 years. Shareholders have been substantially diluted in the past year (85% increase in shares outstanding). Revenue is less than US$1m. Market cap is less than US$10m (AU$9.90m market cap, or US$6.16m).Board Change • Dec 24Insufficient new directorsNo new directors have joined the board in the last 3 years. The company's board is composed of: No new directors. 4 experienced directors. No highly experienced directors. Independent Non-Executive Chairman Andrew Parker was the last director to join the board, commencing their role in 2021. The company’s insufficient board refreshment is considered a risk according to the Simply Wall St Risk Model.공시 • Nov 21WIN Metals Ltd (ASX:WIN) completed the acquisition of Palm Springs Gold Project from Meteoric Resources NL (ASX:MEI) for AUD 5 million.WIN Metals Ltd (ASX:WIN) signed a tenement sale agreement to acquire Palm Springs Gold Project from Meteoric Resources NL (ASX:MEI) for AUD 5 million on August 28, 2024. A deposit of AUD 0.05 plus GST (already received); a cash payment of AUD 0.95 million plus GST upon settlement; and WIN Shares to the value of AUD 1.75 million upon settlement (at a deemed issue price of the next WIN Metals capital raising and subject to 12-month voluntary escrow). A cash payment of AUD 1million plus GST 18 months after settlement; and a cash payment of AUD 1.25 million plus GST upon the production of 20,000oz of gold from Palm Springs. This has been approved by the Board of Meteoric Resources NL. On 9 September 2024 WIN Metals announced that it will commence drilling on the Project in mid-September 2024. WIN Metals Ltd (ASX:WIN) completed the acquisition of Palm Springs Gold Project from Meteoric Resources NL (ASX:MEI) on November 21, 2024공시 • Oct 03WIN Metals Ltd, Annual General Meeting, Nov 28, 2024WIN Metals Ltd, Annual General Meeting, Nov 28, 2024.공시 • Sep 11WIN Metals Ltd has completed a Follow-on Equity Offering in the amount of AUD 3.6 million.WIN Metals Ltd has completed a Follow-on Equity Offering in the amount of AUD 3.6 million. Security Name: Ordinary Shares Security Type: Common Stock Securities Offered: 144,000,000 Price\Range: AUD 0.025 Discount Per Security: AUD 0.0015 Security Features: Attached Options Transaction Features: Subsequent Direct ListingNew Risk • Aug 28New major risk - Share price stabilityThe company's share price has been highly volatile over the past 3 months. It is more volatile than 90% of Australian stocks, typically moving 18% a week. This is considered a major risk. Share price volatility increases the risk of potential losses in the short-term as the stock tends to have larger drops in price more frequently than other stocks. It may also indicate the stock is highly sensitive to market conditions or economic conditions rather than being sensitive to its own business performance, which may also be inconsistent. Currently, the following risks have been identified for the company: Major Risks Share price has been highly volatile over the past 3 months (18% average weekly change). Earnings have declined by 28% per year over the past 5 years. Revenue is less than US$1m. Market cap is less than US$10m (AU$10.9m market cap, or US$7.39m). Minor Risk Shareholders have been diluted in the past year (11% increase in shares outstanding).공시 • Aug 28WIN Metals Ltd (ASX:WIN) signed a tenement sale agreement to acquire Palm Springs Gold Project from Meteoric Resources NL (ASX:MEI) for AUD 5 million.WIN Metals Ltd (ASX:WIN) signed a tenement sale agreement to acquire Palm Springs Gold Project from Meteoric Resources NL (ASX:MEI) for AUD 5 million on August 28, 2024. A deposit of AUD 0.05 plus GST (already received); a cash payment of AUD 0.95 million plus GST upon settlement; and WIN Shares to the value of AUD 1.75 million upon settlement (at a deemed issue price of the next WIN Metals capital raising and subject to 12-month voluntary escrow). A cash payment of AUD 1million plus GST 18 months after settlement; and a cash payment of AUD 1.25 million plus GST upon the production of 20,000oz of gold from Palm Springs. This has been approved by the Board of Meteoric Resources NL.New Risk • Jun 01New minor risk - Shareholder dilutionThe company's shareholders have been diluted in the past year. Increase in shares outstanding: 7.3% This is considered a minor risk. Shareholder dilution occurs when there is an increase in the number of shares on issue that is not proportionally distributed between all shareholders. Often due to the company raising equity capital or some options being converted into stock. All else being equal, if there are more shares outstanding then each existing share will be entitled to a lower proportion of the company's total earnings, thus reducing earnings per share (EPS). While dilution might not always result in lower EPS (like if the company is using the capital to fund an EPS accretive acquisition) in a lot cases it does, along with lower dividends per share and less voting power at shareholder meetings. Currently, the following risks have been identified for the company: Major Risks Share price has been highly volatile over the past 3 months (18% average weekly change). Earnings have declined by 28% per year over the past 5 years. Revenue is less than US$1m. Market cap is less than US$10m (AU$11.5m market cap, or US$7.64m). Minor Risk Shareholders have been diluted in the past year (7.3% increase in shares outstanding).공시 • Apr 17Widgie Nickel Limited has filed a Follow-on Equity Offering in the amount of AUD 3.999934 million.Widgie Nickel Limited has filed a Follow-on Equity Offering in the amount of AUD 3.999934 million. Security Name: Ordinary Shares Security Type: Common Stock Securities Offered: 99,998,340 Price\Range: AUD 0.04 Transaction Features: Rights OfferingNew Risk • Feb 06New major risk - Market cap sizeThe company's market capitalization is less than US$10m. Market cap: AU$14.3m (US$9.29m) This is considered a major risk. Companies with a small market capitalization are most likely businesses that have not yet released a product to market or are simply a very small company without a wide reach. Either way, risk is elevated with these companies because there is a chance the product may not come to fruition or the company's addressable market or demand may not be as large as expected. In addition, if the company's size is the main factor, it is less likely to have many investors and analysts following it and scrutinizing its performance and outlook. Currently, the following risks have been identified for the company: Major Risks Less than 1 year of cash runway based on free cash flow trend (-AU$16m free cash flow). Share price has been highly volatile over the past 3 months (21% average weekly change). Earnings have declined by 43% per year over the past 5 years. Revenue is less than US$1m. Market cap is less than US$10m (AU$14.3m market cap, or US$9.29m). Minor Risk Shareholders have been diluted in the past year (19% increase in shares outstanding).New Risk • Sep 13New major risk - Financial data availabilityThe company's latest financial reports are more than a year old. Last reported fiscal period ended June 2022. This is considered a major risk. If the company has not reported its earnings on time, it may have been delayed due to audit problems or it may be finding it difficult to reconcile its accounts. In the worst case scenario, it may be facing other major going concern issues jeopardizing its viability as a listed company. Currently, the following risks have been identified for the company: Major Risks Latest financial reports are more than 1 year old (reported June 2022 fiscal period end). Revenue is less than US$1m. Minor Risks Shareholders have been diluted in the past year (19% increase in shares outstanding). Market cap is less than US$100m (AU$58.0m market cap, or US$37.3m).공시 • Sep 10Widgie Nickel Limited, Annual General Meeting, Nov 08, 2023Widgie Nickel Limited, Annual General Meeting, Nov 08, 2023.공시 • Feb 16Widgie Nickel Limited Provides Lithium Assay ResultsWidgie Nickel Limited provided Lithium assay results from a 71 hole Reverse Circulation (RC) programme for 2,062m completed at the Faraday Lithium deposit between 12 and 23 January 2023. Drilling was aimed to infill around the previously announced higher grade results to help define an area within the much larger mineralised system, which showed strong potential to be amenable to mining as part of a short-term direct shipping opportunity. In addition to this, drilling was also then extended out on a 40m strike spacing to test the continuation of the spodumene bearing pegmatite. Results to date are considered extremely promising demonstrating both the short and longer-term potential of the Faraday lithium discovery. The complete set of drill results, drill collar summary and cross sections. The RC drilling has confirmed the continuity of the predominate flat west dipping, north-south strike of the lithium bearing pegmatites with a main thicker (5-20m wide) body with a number of thinner 'stacked' bodies present. The pegmatite displays a degree of fractionation common within intrusive rocks. The drilling has successfully delineated continuity of higher-grade lithium values that indicate the pegmatites have the potential to not only be exploited by a short-term direct shipping opportunity but also to host a much larger significant discovery. The drilling to date has only tested a small part of what is thought to be a much larger and extensive pegmatite system with drilling only down to 50m below surface and over 290m strike. With confidence growing in the orientation and lithium grades within the pegmatites, the Company will now look to be more aggressive in undertaking wider spaced exploration drilling further afield to define the extent of the pegmatites. The Mt Edwards Project lithium tenements cover the northern margin of the Widgiemooltha Dome. The region is well endowed with lithium occurrences and includes three major resources at Dome North (Essential Metals Limited to the south, Bald Hill (Lithco) to the east and Mt Marion (Mineral Resources Limited /Gangfeng JV) to the north. The Mt Edwards Project lithium tenements have had limited exploration for lithium to date. Specific to the Faraday deposit the pegmatite bodies are a result of a late-stage fractionated intrusive event interpreted to be located proximal to larger scale granitic intrusion. Coarse grained spodumene has been recorded at multiple surface locations, with the outcrop covering a strike extent of approximately 600 metres in a north-south orientation. The pegmatite outcrop varies in width from 1 metre up to 25 metres. Soil anomalism indicates the intrusive body extends further to the north undercover as supported by sporadic pegmatite outcrops further to the north. Interpretation of the RC drilling indicates Faraday is a stacked pegmatite system dipping shallowly at -25o to the west of widths varying up to 18m in downhole width with minor parasitic veins narrower in thickness and hosted within the Mt Edwards ultramafic suite. The base of weathering/oxidation is extremely shallow, with oxidation and clay minerals observed to a depth of less than 5-10m. Visual spodumene mineralisation is generally pervasive throughout the logged pegmatite body which is supported by the RC drilling assay results. Higher grade zones of lithium mineralisation have been defined by the tighter drilling associated with visually local concentrated spodumene within the pegmatite veins that suggests further investigation is needed to understand the mineralisation controls. The continuity of these shallow higher grades now defined by close spaced drilling confirms they have the potential to be amenable to low-cost open pit mining both from a modest targeted higher grade parcel perspective in addition to a larger lower grade perspective excluding any further expansion of the mineralisation defined along strike or down dip. Faraday is on granted mining tenure, with a favourable ore geometry suggesting a low waste-to-ore ratio to access the mineralisation, coupled with oxidised waste rock, suggesting favourable low-cost mining parameters and importantly a small mining footprint minimising surface disturbance. The Company now intends to Complete a material RC drilling campaign to test the potential of the broader system along strike (over 400m of outcrop untested) and at depth. Continue infill drilling, where thought appropriate, to further understand the lithium endowment and controls. Continue with metallurgical test work to assess overall ore recoveries comprising HLS (heavy liquid separation) in addition to ore sorting test work to investigate the potential of rudimentary upgrading of medium grade ore to a premium DSO (direct shipping ore) grade. Devise an appropriate mine plan and associated permitting activities to accelerate potential development. Following significant interest in the project over the last three months, the Company has engaged corporate adviser Longreach Capital to manage a formal process with interested parties. The Company looks forward to updating the market as the Faraday development pathway evolves.공시 • Feb 13Widgie Nickel Limited Announces Assay Results from Its Reverse Circulation and Diamond Drilling Program Targeting the Gillett and Gillett North MineralisationWidgie Nickel Limited announced assay results from its Reverse Circulation (RC) and Diamond (DD) drilling program targeting the Gillett and Gillett North mineralisation. This announcement pertains to all holes completed as of 31 December 2022 and not previously reported or included in the January 2023 Resource Estimation. As of 8 February 2023, a further 14 pre-collars out of a planned 20 holes within the Gillett area have been drilled in preparation for diamond tails targeting higher grades within the resource wireframes and testing for strike extensions to the south. The Company sees the Greater Widgie South area, comprising Widgie 3, Widgie Townsite and Gillett/Gillett North as the potential second nickel production centre in the Company's portfolio. Given the existing significant nickel endowment (71,860t Ni Indicated and Inferred Resource) across these three deposits, in close proximity, this potential operation will be larger in scale and longer life than the Company's first planned nickel mine at Armstrong. Discussion of Results: Drilling at the northern end of the Gillett Resource has expanded the extent of the known nickel mineralisation up to 80m beyond the current resource wireframes with results of 23m @ 1.03% Ni, 0.11% Cu, 0.03% Co from 246m (MERC236), 10m @ 1.00% Ni, 0.10% Cu, 0.03% Co from 331m (MEDD039) and 15m @ 1.18% Ni, 0.13% Cu, 0.04% Co from 303m (MEDD041). The Gillett Mineral Resource is a nickel sulphide deposit hosted within an ultramafic package dipping steeply (75o to 85o) to the south-west sitting on the eastern limb of a tight upright anticline. Mineralisation at Gillett occurs over a strikelength of more than 1,000 metres in an altered ultramafic on or near the basal contact with three separate sub parallellens now identified. A contact lode position lying directly adjacent to the older hanging wall basalt. The main lode within the ultramafic position lying 5 - 10m away from the contact. The UM2 disseminated lode lying a further 5 - 10m from the main lode (not shown on cross section below). The mineralisation styles within the contact and main lodes range from disseminated to very strong matrix sulphidemineralisation. Zones of massive sulphides have been intersected with grades of up to 8% Ni returned from individual assays.The nickel sulphide mineralisation within the UM2 lens is typically heavily disseminated sulphide which runs between 0.6% and 2.0% nickel. Mineralisation at Gillett North is similar in style to Gillett but sits on the western limb (and possibly around the fold nose) of the same anticline with the geological and structural relationship between the two deposits yet to be fully determined. A significant feature of the recent drilling and ongoing structural studies is the apparent strong structural control on the mineralisation where it has been significantly deformed into smaller secondary "drag folds" on the limbs of larger D2 folds resulting in thick higher grade "pods" with short down dip continuity over approximately 20 -100 metres. These thicker zones do have strong plunge components, as seen at Gillett which has both a flat and moderate to the southeastplunges which are postulated to represent an earlier D1 folding event that has then be refolded during D2. Later stageD3 and D4 faulting have then displaced the lodes. This is important for drill spacing as these better zones can easily be missed in wider spaced drilling and has implications across the field. This is highlighted by wide spaced follow up drilling at Gillett North based on holeMERC225 which intersected 12 metres at 3.40% Ni from 200 metres downhole and 18 metres at 4.69% Ni from 246metres downhole where detailed structural logging of follow up diamond drilling including a twin hole (MEDD072 results pending) advances thisgeological model. The Company intends to improve the building of 3D geological models and where appropriate tighten drilling up and/orincrease the use of down hole electromagnetics (DHEM). Numerous DHEM conductors remain to be tested throughoutthe Company`s tenure and a full review of these plates will be conducted and prioritised for drill testing.공시 • Jan 24Widgie Nickel Limited Announces Updated Mineral Resource Estimate at its Gillett DepositWidgie Nickel Limited announced an updated Mineral Resource Estimate at its Gillett deposit, estimated in accordance with the 2012 JORC Code. Gillett forms part of the Mt Edwards Project located in a province of historic nickel sulphide mines. Using historical and new assay data the reinterpreted Mineral Resource at Gillett has increased the amount of contained nickel from 22,500 to 23,400 tonnes. The Gillett Mineral Resource was estimated by Richard Maddocks from Auralia Mining Consulting. The scope to further grow Gillett has driven a future work program that will include RC pre-collars and diamond core tails drilling to further test the extents of mineralisation, and infill drilling to increase confidence sufficient to `upgrade' the Mineral Resource classification for a greater portion of the Resource. The recent exploration success at Gillett North lies external to the Gillett Resource and will ultimately be included in future iterations upon receipt of outstanding assays and further drilling to be carried out in 2023. The Gillett Nickel deposit is located on Mining Lease M15/94, approximately 3km south-southeast of the Widgiemooltha Township. Widgie holds the nickel rights for Mining Lease M15/94 with the underlying tenure held by Mincor Resources NL. Gillett is one of three nickel deposits located on M15/94, collectively named the Widgie South Trend (Widgie Townsite, Gillett and Widgie 3). Widgie holds nickel interests over a significant portion of the nickel prospective tenements around the Widgiemooltha Dome. The Gillett Mineral Resource is a nickel sulphide deposit hosted within an ultramafic package dipping steeply to the west. Mineralisation at Gillett occurs over a strike length of more than 1km in a talc-carbonate altered ultramafic on or near a basal contact with a basalt. There is a strong foliation developed parallel to the basal contact, and one interpretation is that the basal contact has been thrust from the main contact that hosts the Widgie 3 and Widgie Townsite nickel sulphide deposits. The Gillett deposit has been structurally modified with the mineralisation sitting in the ultramafic of an overturned limb under a hanging wall of basalt. The nickel sulphide mineralisation has been being partly controlled by later stage quartz- carbonate veining. A basalt hill along the strike of Gillett is interpreted to represent the hinge-line of an anticline, with the stratigraphy on the eastern limb overturned and steeply dipping to the west. The ultramafic-basalt contact and mineralisation on this overturned limb strikes northwest at approximately 325 and the higher-grade zones appear to plunge gently to the north. Numerous NE-SW trending deposit scale faults have been identified using field mapping and airborne magnetic geophysics. These faults dip at about 88 towards the NNW and have been defined in the structural logging of the diamond core. Veins seen in diamond core indicate some remobilisation of sulphide minerals at Gillett. Nickel Mineralisation: The mineralisation styles range from weakly disseminated to very strong matrix sulphide mineralisation. Most of the mineralisation is disseminated with stacked zones of matrix and massive sulphide. Generally, the disseminated sulphide runs between 0.6 and 2.0% nickel with the matrix style mineralisation grading up to 3% nickel. Above 3% nickel represents a more massive style of mineralisation. Drilling has intersected massive sulphide zones with banded pyrrhotite and pentlandite grading up to 8% nickel. Modelling: The mineralisation conforms to a Kambalda style komatiite flow hosted orebody. Geology logs were used to construct a basal surface to the ultramafic unit. This surface is the contact between the ultramafic and the underlying mafic basalts. The higher-grade nickel mineralisation accumulates at or near this contact. There are ten modelled domains contained on or close to the basal contact between mafic and ultramafic rock units. There are likely zones of disruption possibly caused by faulting and/or shearing which may dislocate the basal contact. Modelling of these dislocations is not possible given their orientation close to the drilling direction. This may also have caused some remobilisation of nickel sulphides in this central area as there are zones of sulphide mineralisation faulting off the main mafic-ultramafic contact. Domains were modelled and estimated with hard boundaries. A mineralised envelope was modelled using a nominal 0.5% nickel cut-off. This cut-off was chosen as it approximates the grade boundary between nickel sulphide mineralisation in massive/matrix and disseminated forms and non- sulphide nickel contained in the ultramafic host. A top of fresh rock surface was modelled from the logging codes in drill holes. No significant mineralisation extends above this surface. All modelled mineralisation is within the fresh rock domain. The model used parent blocks of 15m X, 15m Y and 5m Z with sub blocks of 0.5m in all directions. The 10 domains were modelled using hard boundaries.공시 • Jan 17Widgie Nickel Limited Provides Update on its Lithium Exploration ActivitiesWidgie Nickel Limited provided an update on its lithium exploration activities. Widgie has continued to review all available datasets demonstrating potential for lithium bearing pegmatites, following the lithium potential demonstrated at the recently discovered Faraday prospect. Initial review of drill data highlighted historical assay results of up to 14m @ 0.95% Li2O from 13m at the Voyager prospect on the southernmost drill line. Whilst drilling 50m directly to the north failed to intersect pegmatite. Re-interpretation and confirmatory surface mapping suggests a different orientation which would suggest previous drilling at the Voyager prospect was ineffective. The Company now intends, upon completion of the current reverse circulation (RC) drilling at Faraday, to immediately conduct an initial eight (8) hole drill program to test the lithium potential at Voyager. Following this, Widgie will look to expand drilling along strike and at depth. All data referred to and reported in this announcement relates to exploration for potential lithium bearing pegmatites conducted by Neometals Ltd. between May 2017 and August 2018. As part of an initial broad assessment at its Mt Edwards Project, mapping and surface sampling was conducted in 2017 at the Atomic 3 prospect located on Mining Lease M15/101, directly north (~300m) of the company`s 132N Nickel Mineral Resource. Rock chip sampling of a series of sub-cropping pegmatite returned numerous assays containing elevated Lithium up to 3.40% Li2O associated with visible spodumene. A follow-up RC drilling programme was carried out in 2018 1. This drilling was only partially successful, with significant lithium bearing pegmatite intersected only on the southernmost drill line across the western most pegmatite (Voyager) with the drilling 50m directly to the north not intersecting the pegmatite. Best drill results from the Voyager pegmatite were: 4 metres at 1.27% Li2O from 43 metres in drillhole MERC030, and 14 metres at 0.95% Li2O from 13 metres, including 4 metres at 1.70% Li2O from 22 metres in drillhole MERC031. Mapping and new 3D modelling of the pegmatite suggests that the drilling to date would have been ineffective in targeting the prospective spodumene bearing horizon due to the pegmatite striking NE-SW, dipping moderately to the west with the drilling missing the modelled pegmatite. Thus, based on Widgie's interpretation, the pegmatite remains untested in all directions. The Company intends, upon completion of the current reverse circulation (RC) drilling underway at Faraday, to carry out an initial eight (8) hole program at Voyager to test this new interpretation prior to testing along strike and at depth. Work also continues to rapidly assess the potential of other known lithium occurrences within the extensive dataset, in conjunction with further mapping, reassessment of existing drill core and RC chips/pulps and ongoing surface sampling to identify new areas of interest.공시 • Jan 10Widgie Nickel Limited Announces Assays Reaffirm High-Grade Lithium Discovery At FaradayWidgie Nickel Limited provided assay results from the outstanding 8 Reverse Circulation (RC) holes from a maiden 18-hole program completed at the Faraday Lithium prospect. Drilling conducted on a nominal 40m x 40m spacing over approximately 175 metres of strike has identified lithium bearing pegmatite extending beneath a 600-metre surface outcrop measuring up to 25 metres wide. The complete set of drill results outlined in Table 1 and illustrated in Figure 1 6 is an extremely promising start, highlighting the continuous presence of lithium-bearing pegmatite at a high-grade (0.8%). The results encourage the Company to significantly increase lithium exploration activity to fully assess the potential scale of the Faraday prospect. The preliminary RC drilling was conducted to provide an indication of the orientation of the pegmatite and the potential distribution of any associated lithium mineralisation. This drilling has been highly successful, and with only very limited shallow drilling done to date, the presence of high-grade lithium values intersected within the pegmatites demonstrate that the area has the potential to host an economic discovery. The drilling and assays confirm the pegmatites display a degree of internal fractionation and/or are multiple events with higher lithium grades more often on the contacts of the pegmatite, with further studies planned to determine the elemental distribution. The higher grade (>0.8%) lithium appears to demonstrate good continuity in an NNE/NE orientation within the overall N/S striking pegmatite with infill drilling designed to test this. The Company in tandem with continuing its nickel drill program will now accelerate its lithium exploration across its tenure. Lithium results (Li, B, Cs and Rb) by Inductively Coupled Plasma "ICP" were prioritised in the assay laboratory and are now all received with X-ray Fluorescence "XRF" results to complete the assay suite (Al, Ba, Ca, Fe, K, Mg, Mn, Nb, P, S, Sn, Sr, Ta, W) pending. The Mt Edwards Project lithium tenements cover the northern margin of the Widgiemooltha Dome. The region is well endowed with lithium occurrences and includes three major resources at Dome North (Essential Metals Limited) to the south, Bald Hill (Lithco) to the east and Mt Marion (Mineral Resources Limited /Gangfeng JV) to the north. The Mt Edwards Project lithium tenements have had limited exploration for lithium to date. Specific to the Faraday prospect the pegmatite bodies are a result of a late-stage fractionated intrusive event interpretedto be located proximal to larger scale granitic intrusion. Coarse grained spodumene has been recorded at multiple surface locations, with the outcrop covering a strike extent of approximately 600 metres in a north-south orientation. The pegmatite outcrop varies in width from 1 metre up to 25 metres. Soil anomalism indicates the intrusive body extends further to the north undercover as supported by sporadic pegmatite outcrops to the north. Interpretation of the RC drilling indicates Faraday is a stacked pegmatite system dipping shallowly at 25o to the west with widths varying up to 18m in downhole width with minor parasitic veins narrower in thickness and hosted within the Mt Edwards ultramafic suite. The base of weathering/oxidation is extremely shallow, with oxidation and clay minerals observed to a depth of less than 5-10m. Spodumene mineralisation whilst occurring throughout the logged pegmatite body shows variable zonation which is supported by the RC drilling assay results and the new diamond core. High grade zones of spodumene mineralisation are found concentrated locally within pegmatite veins that require further drilling and investigation is needed to understand the mineralisation controls. Drilling to date has tested only ~175m of strike down to 50m vertical depth with the new intercept of 7m @ 1.17% Li2O from surface providing further encouragement that there is potential for a fast-tracked small mining operation which can feed into a possible direct shipping arrangement. Infill drilling within the area currently drilled to achieve better mineralisation definition is planned for commencement in mid January with drill density varying from 20m by 20m to some areas designed to be covered on an 10m x10m pattern coincident with better lithium grades. Upon completion, the Company intends to complete a material RC drilling campaign to test the potential of the system along strike (over 400m of untested outcrop) and at depth. Pending heritage clearance and ongoing drill success the program can thereafter expand further as success dictates. Metallurgical testing including XRD testing of mineralogy and physical testing of the drill core is now underway with work comprising initial crushing and sizing analysis to understand if any natural bias exists where spodumene reports to certain size fractions preferentially with various other testing regimes planned thereafter upon completion of this initial work.Board Change • Nov 16High number of new and inexperienced directorsThere are 4 new directors who have joined the board in the last 3 years. The company's board is composed of: 4 new directors. No experienced directors. No highly experienced directors. Independent Non-Executive Director Scott Perry is the most experienced director on the board, commencing their role in 2021. The company’s lack of experienced directors is considered a risk according to the Simply Wall St Risk Model.Board Change • Oct 21High number of new and inexperienced directorsThere are 4 new directors who have joined the board in the last 3 years. The company's board is composed of: 4 new directors. No experienced directors. No highly experienced directors. Independent Non-Executive Director Scott Perry is the most experienced director on the board, commencing their role in 2021. The company’s lack of experienced directors is considered a risk according to the Simply Wall St Risk Model.매출 및 비용 세부 내역WIN Metals가 돈을 벌고 사용하는 방법. 최근 발표된 LTM 실적 기준.순이익 및 매출 추이CHIA:WIN 매출, 비용 및 순이익 (AUD Millions)날짜매출순이익일반관리비연구개발비31 Dec 250-32030 Sep 250-192030 Jun 250-342031 Mar 250-342031 Dec 240-342030 Sep 240-182030 Jun 240-21031 Mar 240-21031 Dec 230-22030 Sep 230-22030 Jun 230-22030 Jun 220-22030 Jun 20000030 Jun 190000양질의 수익: WIN 은(는) 현재 수익성이 없습니다.이익 마진 증가: WIN는 현재 수익성이 없습니다.잉여현금흐름 대비 순이익 분석과거 순이익 성장 분석수익추이: WIN은 수익성이 없으며 지난 5년 동안 손실이 연평균 60.7% 증가했습니다.성장 가속화: 현재 수익성이 없어 지난 1년간 WIN의 수익 성장률을 5년 평균과 비교할 수 없습니다.수익 대 산업: WIN은 수익성이 없어 지난 해 수익 성장률을 Metals and Mining 업계(59.9%)와 비교하기 어렵습니다.자기자본이익률높은 ROE: WIN는 현재 수익성이 없으므로 자본 수익률이 음수(-16.3%)입니다.총자산이익률투하자본수익률우수한 과거 실적 기업을 찾아보세요7D1Y7D1Y7D1YMaterials 산업에서 과거 실적이 우수한 기업.View Financial Health기업 분석 및 재무 데이터 상태데이터최종 업데이트 (UTC 시간)기업 분석2026/05/21 02:01종가2026/05/21 00:00수익2025/12/31연간 수익2025/06/30데이터 소스당사의 기업 분석에 사용되는 데이터는 S&P Global Market Intelligence LLC에서 제공됩니다. 아래 데이터는 이 보고서를 생성하기 위해 분석 모델에서 사용됩니다. 데이터는 정규화되므로 소스가 제공된 후 지연이 발생할 수 있습니다.패키지데이터기간미국 소스 예시 *기업 재무제표10년손익계산서현금흐름표대차대조표SEC 양식 10-KSEC 양식 10-Q분석가 컨센서스 추정치+3년재무 예측분석가 목표주가분석가 리서치 보고서Blue Matrix시장 가격30년주가배당, 분할 및 기타 조치ICE 시장 데이터SEC 양식 S-1지분 구조10년주요 주주내부자 거래SEC 양식 4SEC 양식 13D경영진10년리더십 팀이사회SEC 양식 10-KSEC 양식 DEF 14A주요 개발10년회사 공시SEC 양식 8-K* 미국 증권에 대한 예시이며, 비(非)미국 증권에는 해당 국가의 규제 서식 및 자료원을 사용합니다.별도로 명시되지 않는 한 모든 재무 데이터는 연간 기간을 기준으로 하지만 분기별로 업데이트됩니다. 이를 TTM(최근 12개월) 또는 LTM(지난 12개월) 데이터라고 합니다. 자세히 알아보기.분석 모델 및 스노우플레이크이 보고서를 생성하는 데 사용된 분석 모델에 대한 자세한 내용은 당사의 Github 페이지에서 확인하실 수 있습니다. 또한 보고서 활용 방법에 대한 가이드와 YouTube 튜토리얼도 제공합니다.Simply Wall St 분석 모델을 설계하고 구축한 세계적 수준의 팀에 대해 알아보세요.산업 및 섹터 지표산업 및 섹터 지표는 Simply Wall St가 6시간마다 계산하며, 프로세스에 대한 자세한 내용은 Github에서 확인할 수 있습니다.분석가 소스WIN Metals Ltd는 0명의 분석가가 다루고 있습니다. 이 중 0명의 분석가가 우리 보고서에 입력 데이터로 사용되는 매출 또는 수익 추정치를 제출했습니다. 분석가의 제출 자료는 하루 종일 업데이트됩니다.
Board Change • May 20Insufficient new directorsNo new directors have joined the board in the last 3 years. The company's board is composed of: No new directors. 4 experienced directors. No highly experienced directors. Independent Non-Executive Chairman Andrew Parker was the last director to join the board, commencing their role in 2021. The company’s insufficient board refreshment is considered a risk according to the Simply Wall St Risk Model.
Board Change • May 01Insufficient new directorsNo new directors have joined the board in the last 3 years. The company's board is composed of: No new directors. 4 experienced directors. No highly experienced directors. Independent Non-Executive Chairman Andrew Parker was the last director to join the board, commencing their role in 2021. The company’s insufficient board refreshment is considered a risk according to the Simply Wall St Risk Model.
공시 • Feb 03WIN Metals Ltd has completed a Follow-on Equity Offering in the amount of AUD 5.51 million.WIN Metals Ltd has completed a Follow-on Equity Offering in the amount of AUD 5.51 million. Security Name: Ordinary Shares Security Type: Common Stock Securities Offered: 88,216,429 Price\Range: AUD 0.035 Discount Per Security: AUD 0.0021 Security Name: Ordinary Shares Security Type: Common Stock Securities Offered: 68,926,428 Price\Range: AUD 0.035 Discount Per Security: AUD 0.0021 Security Name: Ordinary Shares Security Type: Common Stock Securities Offered: 285,714 Price\Range: AUD 0.035 Transaction Features: Subsequent Direct Listing
New Risk • Dec 28New major risk - Shareholder dilutionThe company's shareholders have been substantially diluted in the past year. Increase in shares outstanding: 56% This is considered a major risk. Shareholder dilution occurs when there is an increase in the number of shares on issue that is not proportionally distributed between all shareholders. Often due to the company raising equity capital or some options being converted into stock. All else being equal, if there are more shares outstanding then each existing share will be entitled to a lower proportion of the company's total earnings, thus reducing earnings per share (EPS). While dilution might not always result in lower EPS (like if the company is using the capital to fund an EPS accretive acquisition) in a lot cases it does, along with lower dividends per share and less voting power at shareholder meetings. Currently, the following risks have been identified for the company: Major Risks Share price has been highly volatile over the past 3 months (19% average weekly change). Earnings have declined by 58% per year over the past 5 years. Shareholders have been substantially diluted in the past year (56% increase in shares outstanding). Revenue is less than US$1m. Minor Risk Market cap is less than US$100m (AU$30.0m market cap, or US$20.1m).
Board Change • Dec 24Insufficient new directorsNo new directors have joined the board in the last 3 years. The company's board is composed of: No new directors. 4 experienced directors. No highly experienced directors. Independent Non-Executive Chairman Andrew Parker was the last director to join the board, commencing their role in 2021. The company’s insufficient board refreshment is considered a risk according to the Simply Wall St Risk Model.
공시 • Dec 13WIN Metals Ltd has filed a Follow-on Equity Offering in the amount of AUD 5.51 million.WIN Metals Ltd has filed a Follow-on Equity Offering in the amount of AUD 5.51 million. Security Name: Ordinary Shares Security Type: Common Stock Securities Offered: 88,216,429 Price\Range: AUD 0.035 Discount Per Security: AUD 0.0021 Security Name: Ordinary Shares Security Type: Common Stock Securities Offered: 68,926,428 Price\Range: AUD 0.035 Discount Per Security: AUD 0.0021 Security Name: Ordinary Shares Security Type: Common Stock Securities Offered: 285,714 Price\Range: AUD 0.035 Transaction Features: Subsequent Direct Listing
공시 • Sep 26WIN Metals Ltd, Annual General Meeting, Nov 26, 2025WIN Metals Ltd, Annual General Meeting, Nov 26, 2025.
공시 • Aug 21WIN Metals Ltd has filed a Follow-on Equity Offering in the amount of AUD 2.375292 million.WIN Metals Ltd has filed a Follow-on Equity Offering in the amount of AUD 2.375292 million. Security Name: Ordinary Shares Security Type: Common Stock Securities Offered: 117,514,599 Price\Range: AUD 0.02 Discount Per Security: AUD 0.0012 Security Features: Attached Options Security Name: Ordinary Shares Security Type: Common Stock Securities Offered: 1,250,000 Price\Range: AUD 0.02 Security Features: Attached Options Transaction Features: Subsequent Direct Listing
Board Change • Aug 18Insufficient new directorsNo new directors have joined the board in the last 3 years. The company's board is composed of: No new directors. 4 experienced directors. No highly experienced directors. Independent Non-Executive Chairman Andrew Parker was the last director to join the board, commencing their role in 2021. The company’s insufficient board refreshment is considered a risk according to the Simply Wall St Risk Model.
Board Change • Feb 04Insufficient new directorsNo new directors have joined the board in the last 3 years. The company's board is composed of: No new directors. 4 experienced directors. No highly experienced directors. Independent Non-Executive Chairman Andrew Parker was the last director to join the board, commencing their role in 2021. The company’s insufficient board refreshment is considered a risk according to the Simply Wall St Risk Model.
New Risk • Jan 04New major risk - Shareholder dilutionThe company's shareholders have been substantially diluted in the past year. Increase in shares outstanding: 85% This is considered a major risk. Shareholder dilution occurs when there is an increase in the number of shares on issue that is not proportionally distributed between all shareholders. Often due to the company raising equity capital or some options being converted into stock. All else being equal, if there are more shares outstanding then each existing share will be entitled to a lower proportion of the company's total earnings, thus reducing earnings per share (EPS). While dilution might not always result in lower EPS (like if the company is using the capital to fund an EPS accretive acquisition) in a lot cases it does, along with lower dividends per share and less voting power at shareholder meetings. Currently, the following risks have been identified for the company: Major Risks Share price has been highly volatile over the past 3 months (17% average weekly change). Earnings have declined by 24% per year over the past 5 years. Shareholders have been substantially diluted in the past year (85% increase in shares outstanding). Revenue is less than US$1m. Market cap is less than US$10m (AU$9.90m market cap, or US$6.16m).
Board Change • Dec 24Insufficient new directorsNo new directors have joined the board in the last 3 years. The company's board is composed of: No new directors. 4 experienced directors. No highly experienced directors. Independent Non-Executive Chairman Andrew Parker was the last director to join the board, commencing their role in 2021. The company’s insufficient board refreshment is considered a risk according to the Simply Wall St Risk Model.
공시 • Nov 21WIN Metals Ltd (ASX:WIN) completed the acquisition of Palm Springs Gold Project from Meteoric Resources NL (ASX:MEI) for AUD 5 million.WIN Metals Ltd (ASX:WIN) signed a tenement sale agreement to acquire Palm Springs Gold Project from Meteoric Resources NL (ASX:MEI) for AUD 5 million on August 28, 2024. A deposit of AUD 0.05 plus GST (already received); a cash payment of AUD 0.95 million plus GST upon settlement; and WIN Shares to the value of AUD 1.75 million upon settlement (at a deemed issue price of the next WIN Metals capital raising and subject to 12-month voluntary escrow). A cash payment of AUD 1million plus GST 18 months after settlement; and a cash payment of AUD 1.25 million plus GST upon the production of 20,000oz of gold from Palm Springs. This has been approved by the Board of Meteoric Resources NL. On 9 September 2024 WIN Metals announced that it will commence drilling on the Project in mid-September 2024. WIN Metals Ltd (ASX:WIN) completed the acquisition of Palm Springs Gold Project from Meteoric Resources NL (ASX:MEI) on November 21, 2024
공시 • Oct 03WIN Metals Ltd, Annual General Meeting, Nov 28, 2024WIN Metals Ltd, Annual General Meeting, Nov 28, 2024.
공시 • Sep 11WIN Metals Ltd has completed a Follow-on Equity Offering in the amount of AUD 3.6 million.WIN Metals Ltd has completed a Follow-on Equity Offering in the amount of AUD 3.6 million. Security Name: Ordinary Shares Security Type: Common Stock Securities Offered: 144,000,000 Price\Range: AUD 0.025 Discount Per Security: AUD 0.0015 Security Features: Attached Options Transaction Features: Subsequent Direct Listing
New Risk • Aug 28New major risk - Share price stabilityThe company's share price has been highly volatile over the past 3 months. It is more volatile than 90% of Australian stocks, typically moving 18% a week. This is considered a major risk. Share price volatility increases the risk of potential losses in the short-term as the stock tends to have larger drops in price more frequently than other stocks. It may also indicate the stock is highly sensitive to market conditions or economic conditions rather than being sensitive to its own business performance, which may also be inconsistent. Currently, the following risks have been identified for the company: Major Risks Share price has been highly volatile over the past 3 months (18% average weekly change). Earnings have declined by 28% per year over the past 5 years. Revenue is less than US$1m. Market cap is less than US$10m (AU$10.9m market cap, or US$7.39m). Minor Risk Shareholders have been diluted in the past year (11% increase in shares outstanding).
공시 • Aug 28WIN Metals Ltd (ASX:WIN) signed a tenement sale agreement to acquire Palm Springs Gold Project from Meteoric Resources NL (ASX:MEI) for AUD 5 million.WIN Metals Ltd (ASX:WIN) signed a tenement sale agreement to acquire Palm Springs Gold Project from Meteoric Resources NL (ASX:MEI) for AUD 5 million on August 28, 2024. A deposit of AUD 0.05 plus GST (already received); a cash payment of AUD 0.95 million plus GST upon settlement; and WIN Shares to the value of AUD 1.75 million upon settlement (at a deemed issue price of the next WIN Metals capital raising and subject to 12-month voluntary escrow). A cash payment of AUD 1million plus GST 18 months after settlement; and a cash payment of AUD 1.25 million plus GST upon the production of 20,000oz of gold from Palm Springs. This has been approved by the Board of Meteoric Resources NL.
New Risk • Jun 01New minor risk - Shareholder dilutionThe company's shareholders have been diluted in the past year. Increase in shares outstanding: 7.3% This is considered a minor risk. Shareholder dilution occurs when there is an increase in the number of shares on issue that is not proportionally distributed between all shareholders. Often due to the company raising equity capital or some options being converted into stock. All else being equal, if there are more shares outstanding then each existing share will be entitled to a lower proportion of the company's total earnings, thus reducing earnings per share (EPS). While dilution might not always result in lower EPS (like if the company is using the capital to fund an EPS accretive acquisition) in a lot cases it does, along with lower dividends per share and less voting power at shareholder meetings. Currently, the following risks have been identified for the company: Major Risks Share price has been highly volatile over the past 3 months (18% average weekly change). Earnings have declined by 28% per year over the past 5 years. Revenue is less than US$1m. Market cap is less than US$10m (AU$11.5m market cap, or US$7.64m). Minor Risk Shareholders have been diluted in the past year (7.3% increase in shares outstanding).
공시 • Apr 17Widgie Nickel Limited has filed a Follow-on Equity Offering in the amount of AUD 3.999934 million.Widgie Nickel Limited has filed a Follow-on Equity Offering in the amount of AUD 3.999934 million. Security Name: Ordinary Shares Security Type: Common Stock Securities Offered: 99,998,340 Price\Range: AUD 0.04 Transaction Features: Rights Offering
New Risk • Feb 06New major risk - Market cap sizeThe company's market capitalization is less than US$10m. Market cap: AU$14.3m (US$9.29m) This is considered a major risk. Companies with a small market capitalization are most likely businesses that have not yet released a product to market or are simply a very small company without a wide reach. Either way, risk is elevated with these companies because there is a chance the product may not come to fruition or the company's addressable market or demand may not be as large as expected. In addition, if the company's size is the main factor, it is less likely to have many investors and analysts following it and scrutinizing its performance and outlook. Currently, the following risks have been identified for the company: Major Risks Less than 1 year of cash runway based on free cash flow trend (-AU$16m free cash flow). Share price has been highly volatile over the past 3 months (21% average weekly change). Earnings have declined by 43% per year over the past 5 years. Revenue is less than US$1m. Market cap is less than US$10m (AU$14.3m market cap, or US$9.29m). Minor Risk Shareholders have been diluted in the past year (19% increase in shares outstanding).
New Risk • Sep 13New major risk - Financial data availabilityThe company's latest financial reports are more than a year old. Last reported fiscal period ended June 2022. This is considered a major risk. If the company has not reported its earnings on time, it may have been delayed due to audit problems or it may be finding it difficult to reconcile its accounts. In the worst case scenario, it may be facing other major going concern issues jeopardizing its viability as a listed company. Currently, the following risks have been identified for the company: Major Risks Latest financial reports are more than 1 year old (reported June 2022 fiscal period end). Revenue is less than US$1m. Minor Risks Shareholders have been diluted in the past year (19% increase in shares outstanding). Market cap is less than US$100m (AU$58.0m market cap, or US$37.3m).
공시 • Sep 10Widgie Nickel Limited, Annual General Meeting, Nov 08, 2023Widgie Nickel Limited, Annual General Meeting, Nov 08, 2023.
공시 • Feb 16Widgie Nickel Limited Provides Lithium Assay ResultsWidgie Nickel Limited provided Lithium assay results from a 71 hole Reverse Circulation (RC) programme for 2,062m completed at the Faraday Lithium deposit between 12 and 23 January 2023. Drilling was aimed to infill around the previously announced higher grade results to help define an area within the much larger mineralised system, which showed strong potential to be amenable to mining as part of a short-term direct shipping opportunity. In addition to this, drilling was also then extended out on a 40m strike spacing to test the continuation of the spodumene bearing pegmatite. Results to date are considered extremely promising demonstrating both the short and longer-term potential of the Faraday lithium discovery. The complete set of drill results, drill collar summary and cross sections. The RC drilling has confirmed the continuity of the predominate flat west dipping, north-south strike of the lithium bearing pegmatites with a main thicker (5-20m wide) body with a number of thinner 'stacked' bodies present. The pegmatite displays a degree of fractionation common within intrusive rocks. The drilling has successfully delineated continuity of higher-grade lithium values that indicate the pegmatites have the potential to not only be exploited by a short-term direct shipping opportunity but also to host a much larger significant discovery. The drilling to date has only tested a small part of what is thought to be a much larger and extensive pegmatite system with drilling only down to 50m below surface and over 290m strike. With confidence growing in the orientation and lithium grades within the pegmatites, the Company will now look to be more aggressive in undertaking wider spaced exploration drilling further afield to define the extent of the pegmatites. The Mt Edwards Project lithium tenements cover the northern margin of the Widgiemooltha Dome. The region is well endowed with lithium occurrences and includes three major resources at Dome North (Essential Metals Limited to the south, Bald Hill (Lithco) to the east and Mt Marion (Mineral Resources Limited /Gangfeng JV) to the north. The Mt Edwards Project lithium tenements have had limited exploration for lithium to date. Specific to the Faraday deposit the pegmatite bodies are a result of a late-stage fractionated intrusive event interpreted to be located proximal to larger scale granitic intrusion. Coarse grained spodumene has been recorded at multiple surface locations, with the outcrop covering a strike extent of approximately 600 metres in a north-south orientation. The pegmatite outcrop varies in width from 1 metre up to 25 metres. Soil anomalism indicates the intrusive body extends further to the north undercover as supported by sporadic pegmatite outcrops further to the north. Interpretation of the RC drilling indicates Faraday is a stacked pegmatite system dipping shallowly at -25o to the west of widths varying up to 18m in downhole width with minor parasitic veins narrower in thickness and hosted within the Mt Edwards ultramafic suite. The base of weathering/oxidation is extremely shallow, with oxidation and clay minerals observed to a depth of less than 5-10m. Visual spodumene mineralisation is generally pervasive throughout the logged pegmatite body which is supported by the RC drilling assay results. Higher grade zones of lithium mineralisation have been defined by the tighter drilling associated with visually local concentrated spodumene within the pegmatite veins that suggests further investigation is needed to understand the mineralisation controls. The continuity of these shallow higher grades now defined by close spaced drilling confirms they have the potential to be amenable to low-cost open pit mining both from a modest targeted higher grade parcel perspective in addition to a larger lower grade perspective excluding any further expansion of the mineralisation defined along strike or down dip. Faraday is on granted mining tenure, with a favourable ore geometry suggesting a low waste-to-ore ratio to access the mineralisation, coupled with oxidised waste rock, suggesting favourable low-cost mining parameters and importantly a small mining footprint minimising surface disturbance. The Company now intends to Complete a material RC drilling campaign to test the potential of the broader system along strike (over 400m of outcrop untested) and at depth. Continue infill drilling, where thought appropriate, to further understand the lithium endowment and controls. Continue with metallurgical test work to assess overall ore recoveries comprising HLS (heavy liquid separation) in addition to ore sorting test work to investigate the potential of rudimentary upgrading of medium grade ore to a premium DSO (direct shipping ore) grade. Devise an appropriate mine plan and associated permitting activities to accelerate potential development. Following significant interest in the project over the last three months, the Company has engaged corporate adviser Longreach Capital to manage a formal process with interested parties. The Company looks forward to updating the market as the Faraday development pathway evolves.
공시 • Feb 13Widgie Nickel Limited Announces Assay Results from Its Reverse Circulation and Diamond Drilling Program Targeting the Gillett and Gillett North MineralisationWidgie Nickel Limited announced assay results from its Reverse Circulation (RC) and Diamond (DD) drilling program targeting the Gillett and Gillett North mineralisation. This announcement pertains to all holes completed as of 31 December 2022 and not previously reported or included in the January 2023 Resource Estimation. As of 8 February 2023, a further 14 pre-collars out of a planned 20 holes within the Gillett area have been drilled in preparation for diamond tails targeting higher grades within the resource wireframes and testing for strike extensions to the south. The Company sees the Greater Widgie South area, comprising Widgie 3, Widgie Townsite and Gillett/Gillett North as the potential second nickel production centre in the Company's portfolio. Given the existing significant nickel endowment (71,860t Ni Indicated and Inferred Resource) across these three deposits, in close proximity, this potential operation will be larger in scale and longer life than the Company's first planned nickel mine at Armstrong. Discussion of Results: Drilling at the northern end of the Gillett Resource has expanded the extent of the known nickel mineralisation up to 80m beyond the current resource wireframes with results of 23m @ 1.03% Ni, 0.11% Cu, 0.03% Co from 246m (MERC236), 10m @ 1.00% Ni, 0.10% Cu, 0.03% Co from 331m (MEDD039) and 15m @ 1.18% Ni, 0.13% Cu, 0.04% Co from 303m (MEDD041). The Gillett Mineral Resource is a nickel sulphide deposit hosted within an ultramafic package dipping steeply (75o to 85o) to the south-west sitting on the eastern limb of a tight upright anticline. Mineralisation at Gillett occurs over a strikelength of more than 1,000 metres in an altered ultramafic on or near the basal contact with three separate sub parallellens now identified. A contact lode position lying directly adjacent to the older hanging wall basalt. The main lode within the ultramafic position lying 5 - 10m away from the contact. The UM2 disseminated lode lying a further 5 - 10m from the main lode (not shown on cross section below). The mineralisation styles within the contact and main lodes range from disseminated to very strong matrix sulphidemineralisation. Zones of massive sulphides have been intersected with grades of up to 8% Ni returned from individual assays.The nickel sulphide mineralisation within the UM2 lens is typically heavily disseminated sulphide which runs between 0.6% and 2.0% nickel. Mineralisation at Gillett North is similar in style to Gillett but sits on the western limb (and possibly around the fold nose) of the same anticline with the geological and structural relationship between the two deposits yet to be fully determined. A significant feature of the recent drilling and ongoing structural studies is the apparent strong structural control on the mineralisation where it has been significantly deformed into smaller secondary "drag folds" on the limbs of larger D2 folds resulting in thick higher grade "pods" with short down dip continuity over approximately 20 -100 metres. These thicker zones do have strong plunge components, as seen at Gillett which has both a flat and moderate to the southeastplunges which are postulated to represent an earlier D1 folding event that has then be refolded during D2. Later stageD3 and D4 faulting have then displaced the lodes. This is important for drill spacing as these better zones can easily be missed in wider spaced drilling and has implications across the field. This is highlighted by wide spaced follow up drilling at Gillett North based on holeMERC225 which intersected 12 metres at 3.40% Ni from 200 metres downhole and 18 metres at 4.69% Ni from 246metres downhole where detailed structural logging of follow up diamond drilling including a twin hole (MEDD072 results pending) advances thisgeological model. The Company intends to improve the building of 3D geological models and where appropriate tighten drilling up and/orincrease the use of down hole electromagnetics (DHEM). Numerous DHEM conductors remain to be tested throughoutthe Company`s tenure and a full review of these plates will be conducted and prioritised for drill testing.
공시 • Jan 24Widgie Nickel Limited Announces Updated Mineral Resource Estimate at its Gillett DepositWidgie Nickel Limited announced an updated Mineral Resource Estimate at its Gillett deposit, estimated in accordance with the 2012 JORC Code. Gillett forms part of the Mt Edwards Project located in a province of historic nickel sulphide mines. Using historical and new assay data the reinterpreted Mineral Resource at Gillett has increased the amount of contained nickel from 22,500 to 23,400 tonnes. The Gillett Mineral Resource was estimated by Richard Maddocks from Auralia Mining Consulting. The scope to further grow Gillett has driven a future work program that will include RC pre-collars and diamond core tails drilling to further test the extents of mineralisation, and infill drilling to increase confidence sufficient to `upgrade' the Mineral Resource classification for a greater portion of the Resource. The recent exploration success at Gillett North lies external to the Gillett Resource and will ultimately be included in future iterations upon receipt of outstanding assays and further drilling to be carried out in 2023. The Gillett Nickel deposit is located on Mining Lease M15/94, approximately 3km south-southeast of the Widgiemooltha Township. Widgie holds the nickel rights for Mining Lease M15/94 with the underlying tenure held by Mincor Resources NL. Gillett is one of three nickel deposits located on M15/94, collectively named the Widgie South Trend (Widgie Townsite, Gillett and Widgie 3). Widgie holds nickel interests over a significant portion of the nickel prospective tenements around the Widgiemooltha Dome. The Gillett Mineral Resource is a nickel sulphide deposit hosted within an ultramafic package dipping steeply to the west. Mineralisation at Gillett occurs over a strike length of more than 1km in a talc-carbonate altered ultramafic on or near a basal contact with a basalt. There is a strong foliation developed parallel to the basal contact, and one interpretation is that the basal contact has been thrust from the main contact that hosts the Widgie 3 and Widgie Townsite nickel sulphide deposits. The Gillett deposit has been structurally modified with the mineralisation sitting in the ultramafic of an overturned limb under a hanging wall of basalt. The nickel sulphide mineralisation has been being partly controlled by later stage quartz- carbonate veining. A basalt hill along the strike of Gillett is interpreted to represent the hinge-line of an anticline, with the stratigraphy on the eastern limb overturned and steeply dipping to the west. The ultramafic-basalt contact and mineralisation on this overturned limb strikes northwest at approximately 325 and the higher-grade zones appear to plunge gently to the north. Numerous NE-SW trending deposit scale faults have been identified using field mapping and airborne magnetic geophysics. These faults dip at about 88 towards the NNW and have been defined in the structural logging of the diamond core. Veins seen in diamond core indicate some remobilisation of sulphide minerals at Gillett. Nickel Mineralisation: The mineralisation styles range from weakly disseminated to very strong matrix sulphide mineralisation. Most of the mineralisation is disseminated with stacked zones of matrix and massive sulphide. Generally, the disseminated sulphide runs between 0.6 and 2.0% nickel with the matrix style mineralisation grading up to 3% nickel. Above 3% nickel represents a more massive style of mineralisation. Drilling has intersected massive sulphide zones with banded pyrrhotite and pentlandite grading up to 8% nickel. Modelling: The mineralisation conforms to a Kambalda style komatiite flow hosted orebody. Geology logs were used to construct a basal surface to the ultramafic unit. This surface is the contact between the ultramafic and the underlying mafic basalts. The higher-grade nickel mineralisation accumulates at or near this contact. There are ten modelled domains contained on or close to the basal contact between mafic and ultramafic rock units. There are likely zones of disruption possibly caused by faulting and/or shearing which may dislocate the basal contact. Modelling of these dislocations is not possible given their orientation close to the drilling direction. This may also have caused some remobilisation of nickel sulphides in this central area as there are zones of sulphide mineralisation faulting off the main mafic-ultramafic contact. Domains were modelled and estimated with hard boundaries. A mineralised envelope was modelled using a nominal 0.5% nickel cut-off. This cut-off was chosen as it approximates the grade boundary between nickel sulphide mineralisation in massive/matrix and disseminated forms and non- sulphide nickel contained in the ultramafic host. A top of fresh rock surface was modelled from the logging codes in drill holes. No significant mineralisation extends above this surface. All modelled mineralisation is within the fresh rock domain. The model used parent blocks of 15m X, 15m Y and 5m Z with sub blocks of 0.5m in all directions. The 10 domains were modelled using hard boundaries.
공시 • Jan 17Widgie Nickel Limited Provides Update on its Lithium Exploration ActivitiesWidgie Nickel Limited provided an update on its lithium exploration activities. Widgie has continued to review all available datasets demonstrating potential for lithium bearing pegmatites, following the lithium potential demonstrated at the recently discovered Faraday prospect. Initial review of drill data highlighted historical assay results of up to 14m @ 0.95% Li2O from 13m at the Voyager prospect on the southernmost drill line. Whilst drilling 50m directly to the north failed to intersect pegmatite. Re-interpretation and confirmatory surface mapping suggests a different orientation which would suggest previous drilling at the Voyager prospect was ineffective. The Company now intends, upon completion of the current reverse circulation (RC) drilling at Faraday, to immediately conduct an initial eight (8) hole drill program to test the lithium potential at Voyager. Following this, Widgie will look to expand drilling along strike and at depth. All data referred to and reported in this announcement relates to exploration for potential lithium bearing pegmatites conducted by Neometals Ltd. between May 2017 and August 2018. As part of an initial broad assessment at its Mt Edwards Project, mapping and surface sampling was conducted in 2017 at the Atomic 3 prospect located on Mining Lease M15/101, directly north (~300m) of the company`s 132N Nickel Mineral Resource. Rock chip sampling of a series of sub-cropping pegmatite returned numerous assays containing elevated Lithium up to 3.40% Li2O associated with visible spodumene. A follow-up RC drilling programme was carried out in 2018 1. This drilling was only partially successful, with significant lithium bearing pegmatite intersected only on the southernmost drill line across the western most pegmatite (Voyager) with the drilling 50m directly to the north not intersecting the pegmatite. Best drill results from the Voyager pegmatite were: 4 metres at 1.27% Li2O from 43 metres in drillhole MERC030, and 14 metres at 0.95% Li2O from 13 metres, including 4 metres at 1.70% Li2O from 22 metres in drillhole MERC031. Mapping and new 3D modelling of the pegmatite suggests that the drilling to date would have been ineffective in targeting the prospective spodumene bearing horizon due to the pegmatite striking NE-SW, dipping moderately to the west with the drilling missing the modelled pegmatite. Thus, based on Widgie's interpretation, the pegmatite remains untested in all directions. The Company intends, upon completion of the current reverse circulation (RC) drilling underway at Faraday, to carry out an initial eight (8) hole program at Voyager to test this new interpretation prior to testing along strike and at depth. Work also continues to rapidly assess the potential of other known lithium occurrences within the extensive dataset, in conjunction with further mapping, reassessment of existing drill core and RC chips/pulps and ongoing surface sampling to identify new areas of interest.
공시 • Jan 10Widgie Nickel Limited Announces Assays Reaffirm High-Grade Lithium Discovery At FaradayWidgie Nickel Limited provided assay results from the outstanding 8 Reverse Circulation (RC) holes from a maiden 18-hole program completed at the Faraday Lithium prospect. Drilling conducted on a nominal 40m x 40m spacing over approximately 175 metres of strike has identified lithium bearing pegmatite extending beneath a 600-metre surface outcrop measuring up to 25 metres wide. The complete set of drill results outlined in Table 1 and illustrated in Figure 1 6 is an extremely promising start, highlighting the continuous presence of lithium-bearing pegmatite at a high-grade (0.8%). The results encourage the Company to significantly increase lithium exploration activity to fully assess the potential scale of the Faraday prospect. The preliminary RC drilling was conducted to provide an indication of the orientation of the pegmatite and the potential distribution of any associated lithium mineralisation. This drilling has been highly successful, and with only very limited shallow drilling done to date, the presence of high-grade lithium values intersected within the pegmatites demonstrate that the area has the potential to host an economic discovery. The drilling and assays confirm the pegmatites display a degree of internal fractionation and/or are multiple events with higher lithium grades more often on the contacts of the pegmatite, with further studies planned to determine the elemental distribution. The higher grade (>0.8%) lithium appears to demonstrate good continuity in an NNE/NE orientation within the overall N/S striking pegmatite with infill drilling designed to test this. The Company in tandem with continuing its nickel drill program will now accelerate its lithium exploration across its tenure. Lithium results (Li, B, Cs and Rb) by Inductively Coupled Plasma "ICP" were prioritised in the assay laboratory and are now all received with X-ray Fluorescence "XRF" results to complete the assay suite (Al, Ba, Ca, Fe, K, Mg, Mn, Nb, P, S, Sn, Sr, Ta, W) pending. The Mt Edwards Project lithium tenements cover the northern margin of the Widgiemooltha Dome. The region is well endowed with lithium occurrences and includes three major resources at Dome North (Essential Metals Limited) to the south, Bald Hill (Lithco) to the east and Mt Marion (Mineral Resources Limited /Gangfeng JV) to the north. The Mt Edwards Project lithium tenements have had limited exploration for lithium to date. Specific to the Faraday prospect the pegmatite bodies are a result of a late-stage fractionated intrusive event interpretedto be located proximal to larger scale granitic intrusion. Coarse grained spodumene has been recorded at multiple surface locations, with the outcrop covering a strike extent of approximately 600 metres in a north-south orientation. The pegmatite outcrop varies in width from 1 metre up to 25 metres. Soil anomalism indicates the intrusive body extends further to the north undercover as supported by sporadic pegmatite outcrops to the north. Interpretation of the RC drilling indicates Faraday is a stacked pegmatite system dipping shallowly at 25o to the west with widths varying up to 18m in downhole width with minor parasitic veins narrower in thickness and hosted within the Mt Edwards ultramafic suite. The base of weathering/oxidation is extremely shallow, with oxidation and clay minerals observed to a depth of less than 5-10m. Spodumene mineralisation whilst occurring throughout the logged pegmatite body shows variable zonation which is supported by the RC drilling assay results and the new diamond core. High grade zones of spodumene mineralisation are found concentrated locally within pegmatite veins that require further drilling and investigation is needed to understand the mineralisation controls. Drilling to date has tested only ~175m of strike down to 50m vertical depth with the new intercept of 7m @ 1.17% Li2O from surface providing further encouragement that there is potential for a fast-tracked small mining operation which can feed into a possible direct shipping arrangement. Infill drilling within the area currently drilled to achieve better mineralisation definition is planned for commencement in mid January with drill density varying from 20m by 20m to some areas designed to be covered on an 10m x10m pattern coincident with better lithium grades. Upon completion, the Company intends to complete a material RC drilling campaign to test the potential of the system along strike (over 400m of untested outcrop) and at depth. Pending heritage clearance and ongoing drill success the program can thereafter expand further as success dictates. Metallurgical testing including XRD testing of mineralogy and physical testing of the drill core is now underway with work comprising initial crushing and sizing analysis to understand if any natural bias exists where spodumene reports to certain size fractions preferentially with various other testing regimes planned thereafter upon completion of this initial work.
Board Change • Nov 16High number of new and inexperienced directorsThere are 4 new directors who have joined the board in the last 3 years. The company's board is composed of: 4 new directors. No experienced directors. No highly experienced directors. Independent Non-Executive Director Scott Perry is the most experienced director on the board, commencing their role in 2021. The company’s lack of experienced directors is considered a risk according to the Simply Wall St Risk Model.
Board Change • Oct 21High number of new and inexperienced directorsThere are 4 new directors who have joined the board in the last 3 years. The company's board is composed of: 4 new directors. No experienced directors. No highly experienced directors. Independent Non-Executive Director Scott Perry is the most experienced director on the board, commencing their role in 2021. The company’s lack of experienced directors is considered a risk according to the Simply Wall St Risk Model.