View ValuationPower Metallic Mines 将来の成長Future 基準チェック /06 Power Metallic Minesは収益が増加すると予測されています。主要情報n/a収益成長率n/aEPS成長率Metals and Mining 収益成長13.5%収益成長率75.0%将来の株主資本利益率n/aアナリストカバレッジLow最終更新日14 May 2026今後の成長に関する最新情報更新なしすべての更新を表示Recent updatesお知らせ • May 08Power Metallic Mines Inc Reports Additional Assays from Winter 2026 Drill ProgramPower Metallic Mines Inc. provided additional assays from its winter 2026 drill program. Additional drill holes continued to add and refine the high-grade Lion Zone ahead of the 2026 Mineral Resource Estimate (MRE). The infill drill holes in this release cover approximately 560 m down plunge extent from the core of the Lion Zone (PML-26-095) to central southwestern Lion area (PML-26-069). These holes highlight both the robust near surface mineralization as well as returning the deepest high-grade intercept at Lion. These holes will be incorporated into future mineral resource estimates and highlight the potential for open pit development. Continued evolution and support of the modelled interpretation of the Lion Zone is evidenced by PML-26-095 which intersected the interpreted core of the Lion Zone with wide intersections of high-grade copper near surface with 22.00 m @ 11.46% CuEqRec1 including 6.50 m @ 18.59% CuEqRec1 and including 4.00 m @18.62%CuEqRec1. Hole PML-26-069 tested the zone approximately 560 m south-southwest down plunge of PML-26-095 at a vertical depth of 600 m containing a moderate grade of 6.58 m @ 4.00% CuEqRec1 including a high-grade interval of 2.82 m @ 8.26% CuEqRec1. Table 1: Lion Results - Winter 2026 Hole From To Length Au Ag Cu Pd Pt Ni CuEq Rec* (m) (m) (m) (g/t) (g/t) (%) (g/t) (g/t) (%) (%) LION MRE PML-26-069 674.18 680.76 6.58 0.36 7.76 1.43 4.31 0.61 0.12 4.00 Including 674.18 677.00 2.82 0.48 13.40 2.94 9.67 1.40 0.19 8.26 PML-26-095 155.00 177.00 22.00 2.82 23.37 4.92 4.79 5.12 0.27 11.46 Including 155.00 159.00 4.00 0.60 44.95 8.62 4.76 18.18 0.45 18.62 And Including 160.50 167.00 6.50 1.15 42.88 9.41 11.69 5.98 0.56 18.59 And Including 172.00 175.00 3.00 17.12 11.79 3.41 2.27 0.04 0.09 17.12 Note: Reported length is downhole distance; true width based on model projections is estimated as 85% of downhole length 1Copper Equivalent Rec Calculation (CuEqRec1) CuEqRec represents CuEq calculated based on the following metal prices (USD): 2,360.15 $/oz Au, 27.98 $/oz Ag, 1,215.00 $/oz Pd, 1000.00 $/oz Pt, 4.00 $/lb Cu, 10.00 $/lb Ni and 22.50 $/lb Co., and recovered grades based on recent locked-cycle metallurgical recoveries by SGS Canada Inc. Exploratory Drilling – East of Tiger Drill holes PML-26-065, and -076, located to the east of Tiger, were designed to test modeled anomalies derived from the 2025 airborne VTEM survey. Both holes hit anomalous mineralization of sub-economic grades including 1 m of 0.19% Cu at 39.5-40.5 m and 1 m of 0.81 g/t Pt at 96.5-97.5m (PML-26-065). PML-25-076 displayed Lion style assemblages of Au-Cu-Ni-Pd-Pt from 207-233.5 m, averaging 0.1% CuEq. Power Metallic is expecting more assay results from the MRE drilling and regional exploration in the weeks to come. Qualified Person Joseph Campbell, P. Geo, VP Exploration at Power Metallic, is the qualified person who has reviewed and approved the technical disclosure contained in this news release. QAQC and Sampling GeoVector Management Inc. is the Consulting company retained to perform the actual drilling program, which includes core logging and sampling of the drill core. All core in this news release is either HQ or NQ sized core. Drill core is re-fitted and measured. Geotech on core includes photographs (wet & dry), rock quality index, magnetic susceptibility, conductivity, and recovery estimates. Core is logged for lithology, mineralogy, and structural features, and sample intervals are delineated and tagged. Sampled core is mechanically sawn, and half-core is retained for future reference. GeoVector's QAQC program includes regular insertion of CRM standards, duplicates, and blanks into the sample stream with a stringent review of all results. QAQC and data validation was performed, and no material errors were observed. All samples were submitted to and analyzed at Activation Laboratories Ltd, a commercial laboratory independent of Power Metallic with no interest in the Project. Actlabs is an ISO 9001 and 17025 certified and accredited laboratories. Samples submitted through Actlabs are run through standard preparation methods and analysed using RX-1 (Dry, crush (< 7 kg) up to 80% passing 2 mm, riffle split (250 g) and pulverize (mild steel) to 95% passing 105 µm) preparation methods, and using 1F2 (ICP-OES) and 1C-OES - 4-Acid near total digestion + Gold-Platinum-Palladium analysis and 8-Peroxide ICP-OES, for regular and over detection limit analysis. Pegmatite samples are analyzed using UT7 - Li up to 5%, Rb up to 2% method. Actlabs also undertake their own internal coarse and pulp duplicate analysis to ensure proper sample preparation and equipment calibration.お知らせ • May 04Power Metallic Mines Inc. Reports Additional Assays from Winter 2026 Drill Program At Lion ZonePower Metallic Mines Inc. had provided additional assays from its winter 2026 drill program. Drilling continued to define the high-grade Lion Zone in preparation for a 2026 Mineral Resource Estimate (MRE). The infill drill holes in this release are for holes that cover approximately 200 m of strike length from the middle core of the Lion Zone (PML-26-094) to the western edge (PML-26-104), defining mineralization at a vertical depth of approximately 100 m below surface. These holes will be important for future mineral resource estimates to an Indicated Resource classification, potentially for open pit exploitation. The 2026 winter drill campaign continues to support the modelled interpretation of the Lion Zone based on earlier wider spaced drilling and includes PML-26-094 which intersected the interpreted core of the Lion Zone and adds further support to wide intersections of high-grade copper near surface with 17.45 m @ 9.47% CuEqRec1 including 6.30 m @ 17.91% CuEqRec1. Hole PML-26-101 tested the zone approximately 100 m east of PML-26-094 at a slightly deeper vertical depth and contained high grade over a very wide intersection with 39.00 m @ 5.66% CuEqRec1 including 9.20 m @ 15.18% CuEqRec1. A further 100 m west hole PML-26-104 tested the western edge of the Lion Zone and intersected 7.40 m @ 1.07% CuEqRec1 and confirmed the expected mineralization modeled from the wider spaced earlier drilling in this area. Power Metallic is expecting more assay results from the MRE drilling and the regional exploration in the coming days and weeks. Exploratory Drilling – Between Lion and Tiger Drill holes PML-26-071, 074, and 078 were designed to test relatively shallow depths to explore for additional zones of mineralization between Lion and Tiger. While none of the holes hit sufficiently wide zones of mineralization, narrow zones included 0.8 meters @ 0.33% Cu, 0.78 g/t Pd, and 0.35 g/t Pt in hole PML-26-074, indicating the mineralizing structures are still present in the Lion to Tiger area. Qualified Person Joseph Campbell, P. Geo, VP Exploration at Power Metallic, is the qualified person who has reviewed and approved the technical disclosure contained in this news release. QAQC and Sampling GeoVector Management Inc. is the Consulting company retained to perform the actual drilling program, which includes core logging and sampling of the drill core. All core in this news release is NQ sized core. Drill core is re-fitted and measured. Geotech on core includes photographs (wet & dry), rock quality index, magnetic susceptibility, conductivity, and recovery estimates. Core is logged for lithology, mineralogy, and structural features, and sample intervals are delineated and tagged. Sampled core is mechanically sawn, and half-core is retained for future reference. GeoVector's QAQC program includes regular insertion of CRM standards, duplicates, and blanks into the sample stream with a stringent review of all results. QAQC and data validation was performed, and no material errors were observed. All samples were submitted to and analyzed at Activation Laboratories Ltd, a commercial laboratory independent of Power Metallic with no interest in the Project. Actlabs is an ISO 9001 and 17025 certified and accredited laboratories. Samples submitted through Actlabs are run through standard preparation methods and analysed using RX-1 (Dry, crush (< 7 kg) up to 80% passing 2 mm, riffle split (250 g) and pulverize (mild steel) to 95% passing 105 µm) preparation methods, and using 1F2 (ICP-OES) and 1C-OES - 4-Acid near total digestion + Gold-Platinum-Palladium analysis and 8-Peroxide ICP-OES, for regular and over detection limit analysis. Pegmatite samples are analyzed using UT7 - Li up to 5%, Rb up to 2% method. Actlabs also undertake their own internal coarse and pulp duplicate analysis to ensure proper sample preparation and equipment calibration.お知らせ • Apr 23Power Metallic Mines Inc., Annual General Meeting, Jun 30, 2026Power Metallic Mines Inc., Annual General Meeting, Jun 30, 2026.業績と収益の成長予測OTCPK:CMCG.F - アナリストの将来予測と過去の財務データ ( )CAD Millions日付収益収益フリー・キャッシュフロー営業活動によるキャッシュ平均アナリスト数12/31/2028N/AN/AN/AN/A112/31/2027N/AN/AN/AN/A112/31/2026N/AN/AN/AN/A212/31/2025N/A-39-35-35N/A9/30/2025N/A-39-32-32N/A6/30/2025N/A-28-29-29N/A3/31/2025N/A-27-28-28N/A12/31/2024N/A-21-22-22N/A9/30/2024N/A-17-21-21N/A6/30/2024N/A-14-17-17N/A3/31/2024N/A-11-13-13N/A12/31/2023N/A-11-14-14N/A9/30/2023N/A-10-10-10N/A6/30/2023N/A-7-8-8N/A3/31/2023N/A-5-5-5N/A12/31/2022N/A-4-4-4N/A9/30/2022N/A-4-3-3N/A6/30/2022N/A-3-3-3N/A3/31/2022N/A-5-3-3N/A12/31/2021N/A-10-3-3N/A9/30/2021N/A-10-2-2N/A6/30/2021N/A-10-3-3N/A3/31/2021N/A-8-3-3N/A12/31/2020N/A-2-2-2N/A9/30/2020N/A-1-2-2N/A6/30/2020N/A-100N/A3/31/2020N/A-100N/A12/31/2019N/A-100N/A9/30/2019N/A-1N/A-1N/A6/30/2019N/A-1N/A-1N/A3/31/2019N/A-2N/A-2N/A12/31/2018N/A-2N/A-2N/A9/30/2018N/A-2N/A-2N/A6/30/2018N/A-2N/A-2N/A3/31/2018N/A-2N/A-1N/A12/31/2017N/A-2N/A-2N/A9/30/2017N/A-6N/A-2N/A6/30/2017N/A-6N/A-2N/A3/31/2017N/A-6N/A-2N/A12/31/2016N/A-6N/A-1N/A9/30/2016N/A-1N/A-1N/A6/30/2016N/A-1N/A-1N/A3/31/2016N/A-1N/A0N/A12/31/2015N/A-1N/A0N/A9/30/2015N/A0N/A0N/Aもっと見るアナリストによる今後の成長予測収入対貯蓄率: CMCG.Fの予測収益成長が 貯蓄率 ( 3.5% ) を上回っているかどうかを判断するにはデータが不十分です。収益対市場: CMCG.Fの収益がUS市場よりも速く成長すると予測されるかどうかを判断するにはデータが不十分です高成長収益: CMCG.Fの収益が今後 3 年間で 大幅に 増加すると予想されるかどうかを判断するにはデータが不十分です。収益対市場: CMCG.F来年は収益がないと予測されています。高い収益成長: CMCG.F来年は収益がないと予測されています。一株当たり利益成長率予想将来の株主資本利益率将来のROE: CMCG.Fの 自己資本利益率 が 3 年後に高くなると予測されるかどうかを判断するにはデータが不十分です成長企業の発掘7D1Y7D1Y7D1YMaterials 業界の高成長企業。View Past Performance企業分析と財務データの現状データ最終更新日（UTC時間）企業分析2026/05/16 13:43終値2026/05/14 00:00収益2025/12/31年間収益2025/12/31データソース企業分析に使用したデータはS&P Global Market Intelligence LLC のものです。本レポートを作成するための分析モデルでは、以下のデータを使用しています。データは正規化されているため、ソースが利用可能になるまでに時間がかかる場合があります。パッケージデータタイムフレーム米国ソース例会社財務10年損益計算書キャッシュ・フロー計算書貸借対照表SECフォーム10-KSECフォーム10-Qアナリストのコンセンサス予想+プラス3年予想財務アナリストの目標株価アナリストリサーチレポートBlue Matrix市場価格30年株価配当、分割、措置ICEマーケットデータSECフォームS-1所有権10年トップ株主インサイダー取引SECフォーム4SECフォーム13Dマネジメント10年リーダーシップ・チーム取締役会SECフォーム10-KSECフォームDEF 14A主な進展10年会社からのお知らせSECフォーム8-K* 米国証券を対象とした例であり、非米国証券については、同等の規制書式および情報源を使用。特に断りのない限り、すべての財務データは1年ごとの期間に基づいていますが、四半期ごとに更新されます。これは、TTM（Trailing Twelve Month）またはLTM（Last Twelve Month）データとして知られています。詳細はこちら。分析モデルとスノーフレーク本レポートを生成するために使用した分析モデルの詳細は当社のGithubページでご覧いただけます。また、レポートの使用方法に関するガイドやYoutubeのチュートリアルも掲載しています。シンプリー・ウォールストリート分析モデルを設計・構築した世界トップクラスのチームについてご紹介します。業界およびセクターの指標私たちの業界とセクションの指標は、Simply Wall Stによって6時間ごとに計算されます。アナリスト筋Power Metallic Mines Inc. 2 これらのアナリストのうち、弊社レポートのインプットとして使用した売上高または利益の予想を提出したのは、 。アナリストの投稿は一日中更新されます。4 アナリスト機関Matthias GreiffenbergerGBC AGRoger BellHannam & Partners (Advisory) LLPMark La ReichmanNOBLE Capital Markets, Inc.1 その他のアナリストを表示
お知らせ • May 08Power Metallic Mines Inc Reports Additional Assays from Winter 2026 Drill ProgramPower Metallic Mines Inc. provided additional assays from its winter 2026 drill program. Additional drill holes continued to add and refine the high-grade Lion Zone ahead of the 2026 Mineral Resource Estimate (MRE). The infill drill holes in this release cover approximately 560 m down plunge extent from the core of the Lion Zone (PML-26-095) to central southwestern Lion area (PML-26-069). These holes highlight both the robust near surface mineralization as well as returning the deepest high-grade intercept at Lion. These holes will be incorporated into future mineral resource estimates and highlight the potential for open pit development. Continued evolution and support of the modelled interpretation of the Lion Zone is evidenced by PML-26-095 which intersected the interpreted core of the Lion Zone with wide intersections of high-grade copper near surface with 22.00 m @ 11.46% CuEqRec1 including 6.50 m @ 18.59% CuEqRec1 and including 4.00 m @18.62%CuEqRec1. Hole PML-26-069 tested the zone approximately 560 m south-southwest down plunge of PML-26-095 at a vertical depth of 600 m containing a moderate grade of 6.58 m @ 4.00% CuEqRec1 including a high-grade interval of 2.82 m @ 8.26% CuEqRec1. Table 1: Lion Results - Winter 2026 Hole From To Length Au Ag Cu Pd Pt Ni CuEq Rec* (m) (m) (m) (g/t) (g/t) (%) (g/t) (g/t) (%) (%) LION MRE PML-26-069 674.18 680.76 6.58 0.36 7.76 1.43 4.31 0.61 0.12 4.00 Including 674.18 677.00 2.82 0.48 13.40 2.94 9.67 1.40 0.19 8.26 PML-26-095 155.00 177.00 22.00 2.82 23.37 4.92 4.79 5.12 0.27 11.46 Including 155.00 159.00 4.00 0.60 44.95 8.62 4.76 18.18 0.45 18.62 And Including 160.50 167.00 6.50 1.15 42.88 9.41 11.69 5.98 0.56 18.59 And Including 172.00 175.00 3.00 17.12 11.79 3.41 2.27 0.04 0.09 17.12 Note: Reported length is downhole distance; true width based on model projections is estimated as 85% of downhole length 1Copper Equivalent Rec Calculation (CuEqRec1) CuEqRec represents CuEq calculated based on the following metal prices (USD): 2,360.15 $/oz Au, 27.98 $/oz Ag, 1,215.00 $/oz Pd, 1000.00 $/oz Pt, 4.00 $/lb Cu, 10.00 $/lb Ni and 22.50 $/lb Co., and recovered grades based on recent locked-cycle metallurgical recoveries by SGS Canada Inc. Exploratory Drilling – East of Tiger Drill holes PML-26-065, and -076, located to the east of Tiger, were designed to test modeled anomalies derived from the 2025 airborne VTEM survey. Both holes hit anomalous mineralization of sub-economic grades including 1 m of 0.19% Cu at 39.5-40.5 m and 1 m of 0.81 g/t Pt at 96.5-97.5m (PML-26-065). PML-25-076 displayed Lion style assemblages of Au-Cu-Ni-Pd-Pt from 207-233.5 m, averaging 0.1% CuEq. Power Metallic is expecting more assay results from the MRE drilling and regional exploration in the weeks to come. Qualified Person Joseph Campbell, P. Geo, VP Exploration at Power Metallic, is the qualified person who has reviewed and approved the technical disclosure contained in this news release. QAQC and Sampling GeoVector Management Inc. is the Consulting company retained to perform the actual drilling program, which includes core logging and sampling of the drill core. All core in this news release is either HQ or NQ sized core. Drill core is re-fitted and measured. Geotech on core includes photographs (wet & dry), rock quality index, magnetic susceptibility, conductivity, and recovery estimates. Core is logged for lithology, mineralogy, and structural features, and sample intervals are delineated and tagged. Sampled core is mechanically sawn, and half-core is retained for future reference. GeoVector's QAQC program includes regular insertion of CRM standards, duplicates, and blanks into the sample stream with a stringent review of all results. QAQC and data validation was performed, and no material errors were observed. All samples were submitted to and analyzed at Activation Laboratories Ltd, a commercial laboratory independent of Power Metallic with no interest in the Project. Actlabs is an ISO 9001 and 17025 certified and accredited laboratories. Samples submitted through Actlabs are run through standard preparation methods and analysed using RX-1 (Dry, crush (< 7 kg) up to 80% passing 2 mm, riffle split (250 g) and pulverize (mild steel) to 95% passing 105 µm) preparation methods, and using 1F2 (ICP-OES) and 1C-OES - 4-Acid near total digestion + Gold-Platinum-Palladium analysis and 8-Peroxide ICP-OES, for regular and over detection limit analysis. Pegmatite samples are analyzed using UT7 - Li up to 5%, Rb up to 2% method. Actlabs also undertake their own internal coarse and pulp duplicate analysis to ensure proper sample preparation and equipment calibration.
お知らせ • May 04Power Metallic Mines Inc. Reports Additional Assays from Winter 2026 Drill Program At Lion ZonePower Metallic Mines Inc. had provided additional assays from its winter 2026 drill program. Drilling continued to define the high-grade Lion Zone in preparation for a 2026 Mineral Resource Estimate (MRE). The infill drill holes in this release are for holes that cover approximately 200 m of strike length from the middle core of the Lion Zone (PML-26-094) to the western edge (PML-26-104), defining mineralization at a vertical depth of approximately 100 m below surface. These holes will be important for future mineral resource estimates to an Indicated Resource classification, potentially for open pit exploitation. The 2026 winter drill campaign continues to support the modelled interpretation of the Lion Zone based on earlier wider spaced drilling and includes PML-26-094 which intersected the interpreted core of the Lion Zone and adds further support to wide intersections of high-grade copper near surface with 17.45 m @ 9.47% CuEqRec1 including 6.30 m @ 17.91% CuEqRec1. Hole PML-26-101 tested the zone approximately 100 m east of PML-26-094 at a slightly deeper vertical depth and contained high grade over a very wide intersection with 39.00 m @ 5.66% CuEqRec1 including 9.20 m @ 15.18% CuEqRec1. A further 100 m west hole PML-26-104 tested the western edge of the Lion Zone and intersected 7.40 m @ 1.07% CuEqRec1 and confirmed the expected mineralization modeled from the wider spaced earlier drilling in this area. Power Metallic is expecting more assay results from the MRE drilling and the regional exploration in the coming days and weeks. Exploratory Drilling – Between Lion and Tiger Drill holes PML-26-071, 074, and 078 were designed to test relatively shallow depths to explore for additional zones of mineralization between Lion and Tiger. While none of the holes hit sufficiently wide zones of mineralization, narrow zones included 0.8 meters @ 0.33% Cu, 0.78 g/t Pd, and 0.35 g/t Pt in hole PML-26-074, indicating the mineralizing structures are still present in the Lion to Tiger area. Qualified Person Joseph Campbell, P. Geo, VP Exploration at Power Metallic, is the qualified person who has reviewed and approved the technical disclosure contained in this news release. QAQC and Sampling GeoVector Management Inc. is the Consulting company retained to perform the actual drilling program, which includes core logging and sampling of the drill core. All core in this news release is NQ sized core. Drill core is re-fitted and measured. Geotech on core includes photographs (wet & dry), rock quality index, magnetic susceptibility, conductivity, and recovery estimates. Core is logged for lithology, mineralogy, and structural features, and sample intervals are delineated and tagged. Sampled core is mechanically sawn, and half-core is retained for future reference. GeoVector's QAQC program includes regular insertion of CRM standards, duplicates, and blanks into the sample stream with a stringent review of all results. QAQC and data validation was performed, and no material errors were observed. All samples were submitted to and analyzed at Activation Laboratories Ltd, a commercial laboratory independent of Power Metallic with no interest in the Project. Actlabs is an ISO 9001 and 17025 certified and accredited laboratories. Samples submitted through Actlabs are run through standard preparation methods and analysed using RX-1 (Dry, crush (< 7 kg) up to 80% passing 2 mm, riffle split (250 g) and pulverize (mild steel) to 95% passing 105 µm) preparation methods, and using 1F2 (ICP-OES) and 1C-OES - 4-Acid near total digestion + Gold-Platinum-Palladium analysis and 8-Peroxide ICP-OES, for regular and over detection limit analysis. Pegmatite samples are analyzed using UT7 - Li up to 5%, Rb up to 2% method. Actlabs also undertake their own internal coarse and pulp duplicate analysis to ensure proper sample preparation and equipment calibration.
お知らせ • Apr 23Power Metallic Mines Inc., Annual General Meeting, Jun 30, 2026Power Metallic Mines Inc., Annual General Meeting, Jun 30, 2026.