View Financial HealthTalisman Metals 配当と自社株買い配当金 基準チェック /06Talisman Metals配当金を支払った記録がありません。主要情報n/a配当利回りn/aバイバック利回り総株主利回りn/a将来の配当利回りn/a配当成長n/a次回配当支払日n/a配当落ち日n/a一株当たり配当金n/a配当性向n/a最近の配当と自社株買いの更新更新なしすべての更新を表示Recent updatesお知らせ • May 29Talisman Metals PLC Announces Significant Channel Sample Results At Tirzzit Copper-Silver ProjectTalisman Metals PLC announced the results from recent channel sampling activities completed at the Tirzzit copper-silver project in April 2026. Highlight sample results include: Channel TZ-CH001: 2.65m@1.71% Cu and 22.25ppm Ag - ended in mineralisation. Channel TZ-CH003: 0.94m@1.11% Cu and 6.00ppm Ag. Channel TZ-CH005: 1.63m@1.06% Cu and 4.25ppm Ag. Assay Results: Malachite mineralisation at surface within the Basal Series was channel sampled along strike over approximately 700m of the interpreted 4.6km trend, with approximately one channel sample collected every 100m. Along the 700m strike length the average intercept is 1.25m thick with grade of 1.21% Cu and 12.25ppm Ag (weighted average) and the alteration halo is about 2.00m thick on average. Intercepts usually sit on the top of the Basal Series and the hanging wall coincides with the contact on dolomite material. Results confirm that the mineralised horizon in the Basal Series identified during historical mapping shows lateral continuity, with values above cut-off grade (Cu Cut-Off Grade=0.3%) in all seven of seven channels over a strike length of 700m with copper (Cu) grades ranging from 0.75% to 1.74% and silver (Ag) grades ranging from 3 to 22ppm. Note that all the intervals are reported as true width. The sampling was done using channel sampling, with sub-vertical groves against outcrops dipping 30 Degrees to the North-North-West, cut with a circular saw on 63.5mm wide grove (HQ Core Diameter). True thickness of the sampling intervals were measured with a Jacob Staff. A total of 6 QA/QC samples were inserted into the original samples, comprising approximately 5% blanks, 5% field duplicates, and 5% certified reference materials. Samples were submitted to the ONHYM laboratory for sample preparation (crushing at 3mm, 85% pass and pulverised at 75microns) and multi-element analysis using a three-acid digestion (HCl-HNO3-HF) with ICP-AES finish. The analytical method has a lower detection limit of 5 ppm for copper (Cu) and 1 ppm for silver (Ag). Blank samples showed no evidence of contamination above three times the detection limit for Cu or Ag. Field duplicates demonstrated an acceptable repeatability, with an R² value of 0.93. Certified reference materials consistently returned copper values approximately 14% below certified values, and the Company is reviewing the potential analytical bias; however, the Company does not currently consider this issue to materially impact the interpretation of the results. For the reporting of each intercept stated comprised of more than one sample and samples are of differing lengths. In this case the average grade for the full interval length was calculated by length-weighted averaging, a standard method for determining average grades. The Tirzzit Project is a sediment-hosted stratiform Cu-Ag system, located 225km east of the city of Agadir, Morocco. The acquisition transaction of the Project was announced February 16, 2026 from a wholly owned subsidiary of Aya Silver & Gold Inc. (TSX: AYA; OTCQX: AYASF), the Company's 4.7% shareholder. The Project consists of two mining licenses covering a surface area of 16.5km2. Historic drilling results, as reported by Moroccan Government agency Bureau of Research and Mining Participations (BRPM) between 1972 and 1976 include drill intersections of 3.16% Cu over 2.5m and 0.60% Cu over 11.4m. Presently the Company is reviewing the extensive BRPM Reports and past collected geophysical data for exploration planning slated to commence in Third Quarter 2026. Talisman continues to process with Aya the formal transfer of the Tirzzit licences on the back of the sale agreement announced February 16, 2026. The technical disclosure in this news release has been approved by Fabien Linares, MSc, MAusIMM, a Qualified Person as defined in JORC 2012. The scientific and technical information summarized in this disclosure and related to historic exploration was reviewed by Mr. Linares and he has visited the Project area. Mr. Linares is Head Geologist of Talisman Metals PLC and has sufficient experience that is relevant to the commodity, style of mineralisation or type of deposit under consideration and activity which he is undertaking to qualify as a Competent Person under the JORC code (2012 Edition). The information in this announcement that relates to historical reported exploration results is based on, and fairly represents, information and supporting documentation prepared by previous operators and/or extracted from historical reports. The historical exploration results referred to in this announcement were reported prior to the introduction of the JORC Code (2012) and have not been reported in accordance with the JORC Code (2012). A Competent Person has not done sufficient work to disclose the historical exploration results in accordance with the JORC Code (2012). It is possible that following further evaluation and/or exploration work, the accuracy and reliability of the historical exploration results may not be confirmed. The Company has not independently verified the historical exploration results, and no assurance can be given that future exploration work will result in the confirmation or upgrade of the historical results to JORC Code (2012) compliant Mineral Resources or Ore Reserves. The Company considers the historical exploration results to be relevant as they provide an indication of the potential of the project. However, the information should not be relied upon as a representation of the current mineral resource or exploration potential.お知らせ • May 20Talisman Metals plc Reports Positive Stream Sediment Sampling Results At Fougnar ProjectTalisman Metals PLC reported the results of its recently completed stream sediment sampling program at the Company's Fougnar licenses, which are 25km west of the Tizert copper-silver mine. The stream sediment work, in combination with historical field work and mapping, confirms the priority of established drill targets. Additionally, a previously unknown area of potential mineralisation has been discovered and will be added to the anticipated drill program scheduled for the summer 2026. Talisman believes that the sediment rock formations at Fougnar have excellent potential to host a large sediment-hosted copper-silver deposit, similar to other such deposits in the Anti-Atlas area of central Morocco. The main work focus at the Fougnar Project to date has been on the northern section, due to outcropping mineralisation. However, significantly copper-anomalous samples were collected on the southern part of the Fougnar Project over a 1km long interval. A total of 132 stream sediment samples were collected across the Fougnar Project. Multiple anomalous catchments were identified, with assay results of up to: 200 ppm Cu (Copper), 6,510 ppm Ba (Barium), 502 ppm Pb (Lead), 161 ppm Zn (Zinc). Newly identified target corridors extend over approximately 4 km across six distinct target areas, in addition to the existing 2.5 km mineralised trend identified along strike. Historical trenching areas containing known mineralisation were successfully confirmed by stream sediment sampling and used as orientation areas to establish threshold values for copper geochemical anomalies. Several geochemical anomalies are spatially associated with mapped structural features identified in the field and interpreted from ground TEM surveys and favourable lithological units within the basal series stratigraphy. Stream sediment samples were collected from fine sediment traps within active drainage channels over intervals of approximately 20-30 m along stream courses, while avoiding areas affected by anthropogenic contamination or stream disturbance. Sample locations were recorded using handheld GPS devices. Samples were dried and sieved to <63 µm prior to analysis. A total of 23 QA/QC samples were inserted into the sample stream, comprising approximately 5% blanks, 5% field duplicates, and 5% certified reference materials. Samples were submitted to the ONHYM laboratory in Rabat, Morocco for multi-element analysis using a three-acid digestion (HCl-HNO3-HF) with ICP-AES finish. The analytical method has a lower detection limit of 5 ppm for copper (Cu) and 1 ppm for silver (Ag). Blank samples showed no evidence of contamination above three times the detection limit for Cu or Ag. Field duplicates demonstrated excellent repeatability, with an R² value of 0.99. Certified reference materials consistently returned copper values approximately 10-20% below certified values, and the Company is reviewing the potential analytical bias; however, the Company does not currently consider this issue to materially impact the interpretation of the results. Follow-up work programmes underway including: Detailed geological mapping and rock-chip sampling; Trenching across priority target areas; Follow-up drilling of any significant trench results to test mineralisation at depth and along strike. The information in this announcement that relates to historical reported exploration results is based on, and fairly represents, information and supporting documentation prepared by previous operators and/or extracted from historical reports. The historical exploration results referred to in this announcement were reported prior to the introduction of the JORC Code (2012) and have not been reported in accordance with the JORC Code (2012). A Competent Person has not done sufficient work to disclose the historical exploration results in accordance with the JORC Code (2012). It is possible that following further evaluation and/or exploration work, the accuracy and reliability of the historical exploration results may not be confirmed. The Company has not independently verified the historical exploration results, and no assurance can be given that future exploration work will result in the confirmation or upgrade of the historical results to JORC Code (2012) compliant Mineral Resources or Ore Reserves. The Company considers the historical exploration results to be relevant as they provide an indication of the potential of the project. However, the information should not be relied upon as a representation of the current mineral resource or exploration potential. The technical disclosure in this news release has been approved by Fabien Linares, MSc, MAusIMM, a Qualified Person as defined in JORC 2012. The scientific and technical information summarized in this disclosure and related to historic exploration was reviewed by Mr. Linares and he has visited the Project area. Mr. Linares is Head Geologist of Talisman Metals PLC and has sufficient experience that is relevant to the commodity, style of mineralisation or type of deposit under consideration and activity which he is undertaking to qualify as a Competent Person under the JORC code (2012 Edition). HCl-HNO3-HF Hydrochloric-hydrofluoric acid material that is used in elemental laboratory testing of rock samples. ICP-AES Inductively Coupled Plasma Atomic Emission Spectrometer is a type of elemental analysis used in laboratories. Ppm Parts per million. R² value A statistical measure regarding how well a data set forms a trend.お知らせ • Apr 29Talisman Metals plc Provides Update on Tirzzit Project Sampling and Exploration ResultsTalisman Metals PLC reported it has collected 7 channel samples at the Tirzzit Project, for a total length of 23m and 38 Trench samples including 5 QAQC samples and 3 Grab samples which have been sent for assaying. The first phase of fieldwork at Tirzzit consists of testing the grade and thickness of mineralisation along strike, from west to east, on outcrop in order to confirm: lateral continuity; historical Copper (Cu) and Silver (Ag) grades; and the location of thicker intervals for channel sampling at approximately 100m spacing, using a Jacob staff to determine true thickness and improve understanding of the controls on mineralisation. The initial 700m of strike targeted a horizon 1 to 5m thick from surface, exhibiting malachite mineralisation at surface amongst the 4.6 kilometres mineralized horizons that has been historically identified. The next phases of sampling will include: continuing channel sampling of the basal series from west to east, from Licence LE393478 to LE393507; channel sampling of the basal series within historical adits developed by the BRPM; conducting mapping of the lower limestone units to identify gossans, followed by grab sampling-initially above historically successful drill holes and subsequently across untested areas; and infill sampling of historical stream sediment coverage within previously untested watersheds. The preparation of a drill programme to redrill historical short holes that have missed mineralisation and drill out open extensions of mineralisation. The Tirzzit Project is a sediment-hosted stratiform Cu-Ag system, located 225km east of the city of Agadir, Morocco. The acquisition transaction of the Project was announced February 16, 2026 from a wholly owned subsidiary of Aya Silver & Gold Inc. (TSX: AYA; OTCQX: AYASF), the Company's 4.7% shareholder. The Project consists of two mining licenses covering a surface area of 16.5km2. Historic drilling results as reported by Moroccan Government agency Bureau of Research and Mining Participations (BRPM) between 1972 and 1976 include drill intersections of 3.16% Cu over 2.5m and 0.60% Cu over 11.4m. Presently the Company is reviewing the extensive BRPM Reports and past collected geophysical data for exploration planning slated to commence in Second Half 2026. Talisman is processing with Aya the formal transfer of the Tirzzit licences on the back of the acquisition agreement announced February 16, 2026. The technical disclosure in this news release has been approved by Fabien Linares, MSc, MAusIMM, a Qualified Person as defined in JORC 2012. The scientific and technical information summarized in this disclosure and related to historic exploration was reviewed by Mr. Linares and he has visited the Project area. Mr. Linares is Head Geologist of Talisman Metals PLC and has sufficient experience that is relevant to the commodity, style of mineralisation or type of deposit under consideration and activity which he is undertaking to qualify as a Competent Person under the JORC code (2012 Edition). The information in this announcement that relates to historical reported exploration results is based on, and fairly represents, information and supporting documentation prepared by previous operators and/or extracted from historical reports. The historical exploration results referred to in this announcement were reported prior to the introduction of the JORC Code (2012) and have not been reported in accordance with the JORC Code (2012). A Competent Person has not done sufficient work to disclose the historical exploration results in accordance with the JORC Code (2012). It is possible that following further evaluation and/or exploration work, the accuracy and reliability of the historical exploration results may not be confirmed. The Company has not independently verified the historical exploration results, and no assurance can be given that future exploration work will result in the confirmation or upgrade of the historical results to JORC Code (2012) compliant Mineral Resources or Ore Reserves. The Company considers the historical exploration results to be relevant as they provide an indication of the potential of the project. However, the information should not be relied upon as a representation of the current mineral resource or exploration potential.お知らせ • Feb 25Talisman Metals plc Announces Commencement of Exploration Work At Fougnar Cu-Ag ProjectTalisman Metals PLC announced the commencement of a preliminary exploration programme at its Fougnar Copper-Silver Project (the "Project") within the Tizert group of licenses that Talisman recently acquired. The exploration work is focused on improving the Company's understanding of structural geography at the Project and establishing drill-ready targets for subsequent campaigns later in 2026. The exploration programme integrates trenching, ground geophysics, and stream sediment sampling, designed to define priority targets across the Project area. Additionally, a modest scout drill work program will be conducted to improve Project stratigraphy understanding. Exploration Programme Overview 1-Ground geophysics, 2 phases: Phase 1: Transient Electromagnetics (TEM) surveys on a 250m x 250m grid over the southern permit area and Higher-Resolution TEM surveys on a 250m x 100m grid over the northern permit area to map out structures that control mineralisation (Paleorelief of basement rock) and resistive profiles to track conductive "horizons" up to 500m deep. Phase 2: Four-pole dipole-dipole Induced Polarisation (IP) 1km profiles across priority targets in the northern permit area to track mineralised/conductive and chargeable sulphide rich horizons up to 300m deep. Scout reverse circulation drilling to test geological stratigraphy associated with mapped data and outcropping Cu-Ag down dip from previous trench results (FO-CH09 with 1.1m @ 1.16% Cu and 53g/t Au, FO-CH02 with 0.6m @ 0.41% Cu and FO-CH04 0.7m @ 0.70% Cu and 17g/t Au. Geological Rationale The current programme is designed to test both strike and depth continuity of mineralised Cu-Ag zones and to assess the broader prospectivity of the Project area. Next steps Mobilisation and field activities have commenced and will be completed over the coming weeks. Results from trenching, geophysics, and geochemical sampling will be used to refine drill targets, with further updates to be provided as data become available. The technical disclosure in this news release has been approved by Fabien Linares, MSc, MAusIMM, a Qualified Person as defined in JORC 2012. The scientific and technical information summarized in this disclosure and related to historic exploration was reviewed by Mr. Linares and he has visited the Project area. Mr. Linares is Head Geologist of Talisman Metals PLC and has sufficient experience that is relevant to the commodity, style of mineralisation or type of deposit under consideration and activity which he is undertaking to qualify as a Competent Person under the JORC code (2012 Edition). Mineralisation observed in the outcropping sedimentary host units on Trench CH09 (left). Malachite and Azurite (copper-carbonate) mineralisation from FO-CH09 (left).お知らせ • Feb 12Talisman Metals PLC Appoints Fabien Linares as Head GeologistTalisman Metals PLC announced it has appointed Fabien Linares as Head Geologist. Mr. Linares is a professional geologist with 20 years of experience and is a member of the AusIMM with a Master's Degree in management of Geo Resources from ENSEGID - Bordeaux INP. His most recent work was with SRK Consulting UK where he managed a 30-drill-rig exploration program for resource generation in Saudi Arabia. His career includes previous roles at CSA Global, Endeavour Mining Corporation and Fortescue Metals Group. Mr. Linares has extensive experience working throughout Africa managing exploration and resource development programs.決済の安定と成長配当データの取得安定した配当: TLMの 1 株当たり配当が過去に安定していたかどうかを判断するにはデータが不十分です。増加する配当: TLMの配当金が増加しているかどうかを判断するにはデータが不十分です。配当利回り対市場Talisman Metals 配当利回り対市場TLM 配当利回りは市場と比べてどうか？セグメント配当利回り会社 (TLM)n/a市場下位25% (DE)1.5%市場トップ25% (DE)4.5%業界平均 (Metals and Mining)1.3%アナリスト予想 (TLM) (最長3年)n/a注目すべき配当: TLMは最近配当金を報告していないため、配当金支払者の下位 25% に対して同社の配当利回りを評価することはできません。高配当: TLMは最近配当金を報告していないため、配当金支払者の上位 25% に対して同社の配当利回りを評価することはできません。株主への利益配当収益カバレッジ: TLMの 配当性向 を計算して配当金の支払いが利益で賄われているかどうかを判断するにはデータが不十分です。株主配当金キャッシュフローカバレッジ: TLMが配当金を報告していないため、配当金の持続可能性を計算できません。高配当企業の発掘7D1Y7D1Y7D1YDE 市場の強力な配当支払い企業。View Management企業分析と財務データの現状データ最終更新日（UTC時間）企業分析2026/05/30 18:47終値2026/05/27 00:00収益2025/06/30年間収益2024/12/31データソース企業分析に使用したデータはS&P Global Market Intelligence LLC のものです。本レポートを作成するための分析モデルでは、以下のデータを使用しています。データは正規化されているため、ソースが利用可能になるまでに時間がかかる場合があります。パッケージデータタイムフレーム米国ソース例会社財務10年損益計算書キャッシュ・フロー計算書貸借対照表SECフォーム10-KSECフォーム10-Qアナリストのコンセンサス予想+プラス3年予想財務アナリストの目標株価アナリストリサーチレポートBlue Matrix市場価格30年株価配当、分割、措置ICEマーケットデータSECフォームS-1所有権10年トップ株主インサイダー取引SECフォーム4SECフォーム13Dマネジメント10年リーダーシップ・チーム取締役会SECフォーム10-KSECフォームDEF 14A主な進展10年会社からのお知らせSECフォーム8-K* 米国証券を対象とした例であり、非米国証券については、同等の規制書式および情報源を使用。特に断りのない限り、すべての財務データは1年ごとの期間に基づいていますが、四半期ごとに更新されます。これは、TTM（Trailing Twelve Month）またはLTM（Last Twelve Month）データとして知られています。詳細はこちら。分析モデルとスノーフレーク本レポートを生成するために使用した分析モデルの詳細は当社のGithubページでご覧いただけます。また、レポートの使用方法に関するガイドやYoutubeのチュートリアルも掲載しています。シンプリー・ウォールストリート分析モデルを設計・構築した世界トップクラスのチームについてご紹介します。業界およびセクターの指標私たちの業界とセクションの指標は、Simply Wall Stによって6時間ごとに計算されます。アナリスト筋Talisman Metals PLC 0 これらのアナリストのうち、弊社レポートのインプットとして使用した売上高または利益の予想を提出したのは、 。アナリストの投稿は一日中更新されます。0
お知らせ • May 29Talisman Metals PLC Announces Significant Channel Sample Results At Tirzzit Copper-Silver ProjectTalisman Metals PLC announced the results from recent channel sampling activities completed at the Tirzzit copper-silver project in April 2026. Highlight sample results include: Channel TZ-CH001: 2.65m@1.71% Cu and 22.25ppm Ag - ended in mineralisation. Channel TZ-CH003: 0.94m@1.11% Cu and 6.00ppm Ag. Channel TZ-CH005: 1.63m@1.06% Cu and 4.25ppm Ag. Assay Results: Malachite mineralisation at surface within the Basal Series was channel sampled along strike over approximately 700m of the interpreted 4.6km trend, with approximately one channel sample collected every 100m. Along the 700m strike length the average intercept is 1.25m thick with grade of 1.21% Cu and 12.25ppm Ag (weighted average) and the alteration halo is about 2.00m thick on average. Intercepts usually sit on the top of the Basal Series and the hanging wall coincides with the contact on dolomite material. Results confirm that the mineralised horizon in the Basal Series identified during historical mapping shows lateral continuity, with values above cut-off grade (Cu Cut-Off Grade=0.3%) in all seven of seven channels over a strike length of 700m with copper (Cu) grades ranging from 0.75% to 1.74% and silver (Ag) grades ranging from 3 to 22ppm. Note that all the intervals are reported as true width. The sampling was done using channel sampling, with sub-vertical groves against outcrops dipping 30 Degrees to the North-North-West, cut with a circular saw on 63.5mm wide grove (HQ Core Diameter). True thickness of the sampling intervals were measured with a Jacob Staff. A total of 6 QA/QC samples were inserted into the original samples, comprising approximately 5% blanks, 5% field duplicates, and 5% certified reference materials. Samples were submitted to the ONHYM laboratory for sample preparation (crushing at 3mm, 85% pass and pulverised at 75microns) and multi-element analysis using a three-acid digestion (HCl-HNO3-HF) with ICP-AES finish. The analytical method has a lower detection limit of 5 ppm for copper (Cu) and 1 ppm for silver (Ag). Blank samples showed no evidence of contamination above three times the detection limit for Cu or Ag. Field duplicates demonstrated an acceptable repeatability, with an R² value of 0.93. Certified reference materials consistently returned copper values approximately 14% below certified values, and the Company is reviewing the potential analytical bias; however, the Company does not currently consider this issue to materially impact the interpretation of the results. For the reporting of each intercept stated comprised of more than one sample and samples are of differing lengths. In this case the average grade for the full interval length was calculated by length-weighted averaging, a standard method for determining average grades. The Tirzzit Project is a sediment-hosted stratiform Cu-Ag system, located 225km east of the city of Agadir, Morocco. The acquisition transaction of the Project was announced February 16, 2026 from a wholly owned subsidiary of Aya Silver & Gold Inc. (TSX: AYA; OTCQX: AYASF), the Company's 4.7% shareholder. The Project consists of two mining licenses covering a surface area of 16.5km2. Historic drilling results, as reported by Moroccan Government agency Bureau of Research and Mining Participations (BRPM) between 1972 and 1976 include drill intersections of 3.16% Cu over 2.5m and 0.60% Cu over 11.4m. Presently the Company is reviewing the extensive BRPM Reports and past collected geophysical data for exploration planning slated to commence in Third Quarter 2026. Talisman continues to process with Aya the formal transfer of the Tirzzit licences on the back of the sale agreement announced February 16, 2026. The technical disclosure in this news release has been approved by Fabien Linares, MSc, MAusIMM, a Qualified Person as defined in JORC 2012. The scientific and technical information summarized in this disclosure and related to historic exploration was reviewed by Mr. Linares and he has visited the Project area. Mr. Linares is Head Geologist of Talisman Metals PLC and has sufficient experience that is relevant to the commodity, style of mineralisation or type of deposit under consideration and activity which he is undertaking to qualify as a Competent Person under the JORC code (2012 Edition). The information in this announcement that relates to historical reported exploration results is based on, and fairly represents, information and supporting documentation prepared by previous operators and/or extracted from historical reports. The historical exploration results referred to in this announcement were reported prior to the introduction of the JORC Code (2012) and have not been reported in accordance with the JORC Code (2012). A Competent Person has not done sufficient work to disclose the historical exploration results in accordance with the JORC Code (2012). It is possible that following further evaluation and/or exploration work, the accuracy and reliability of the historical exploration results may not be confirmed. The Company has not independently verified the historical exploration results, and no assurance can be given that future exploration work will result in the confirmation or upgrade of the historical results to JORC Code (2012) compliant Mineral Resources or Ore Reserves. The Company considers the historical exploration results to be relevant as they provide an indication of the potential of the project. However, the information should not be relied upon as a representation of the current mineral resource or exploration potential.
お知らせ • May 20Talisman Metals plc Reports Positive Stream Sediment Sampling Results At Fougnar ProjectTalisman Metals PLC reported the results of its recently completed stream sediment sampling program at the Company's Fougnar licenses, which are 25km west of the Tizert copper-silver mine. The stream sediment work, in combination with historical field work and mapping, confirms the priority of established drill targets. Additionally, a previously unknown area of potential mineralisation has been discovered and will be added to the anticipated drill program scheduled for the summer 2026. Talisman believes that the sediment rock formations at Fougnar have excellent potential to host a large sediment-hosted copper-silver deposit, similar to other such deposits in the Anti-Atlas area of central Morocco. The main work focus at the Fougnar Project to date has been on the northern section, due to outcropping mineralisation. However, significantly copper-anomalous samples were collected on the southern part of the Fougnar Project over a 1km long interval. A total of 132 stream sediment samples were collected across the Fougnar Project. Multiple anomalous catchments were identified, with assay results of up to: 200 ppm Cu (Copper), 6,510 ppm Ba (Barium), 502 ppm Pb (Lead), 161 ppm Zn (Zinc). Newly identified target corridors extend over approximately 4 km across six distinct target areas, in addition to the existing 2.5 km mineralised trend identified along strike. Historical trenching areas containing known mineralisation were successfully confirmed by stream sediment sampling and used as orientation areas to establish threshold values for copper geochemical anomalies. Several geochemical anomalies are spatially associated with mapped structural features identified in the field and interpreted from ground TEM surveys and favourable lithological units within the basal series stratigraphy. Stream sediment samples were collected from fine sediment traps within active drainage channels over intervals of approximately 20-30 m along stream courses, while avoiding areas affected by anthropogenic contamination or stream disturbance. Sample locations were recorded using handheld GPS devices. Samples were dried and sieved to <63 µm prior to analysis. A total of 23 QA/QC samples were inserted into the sample stream, comprising approximately 5% blanks, 5% field duplicates, and 5% certified reference materials. Samples were submitted to the ONHYM laboratory in Rabat, Morocco for multi-element analysis using a three-acid digestion (HCl-HNO3-HF) with ICP-AES finish. The analytical method has a lower detection limit of 5 ppm for copper (Cu) and 1 ppm for silver (Ag). Blank samples showed no evidence of contamination above three times the detection limit for Cu or Ag. Field duplicates demonstrated excellent repeatability, with an R² value of 0.99. Certified reference materials consistently returned copper values approximately 10-20% below certified values, and the Company is reviewing the potential analytical bias; however, the Company does not currently consider this issue to materially impact the interpretation of the results. Follow-up work programmes underway including: Detailed geological mapping and rock-chip sampling; Trenching across priority target areas; Follow-up drilling of any significant trench results to test mineralisation at depth and along strike. The information in this announcement that relates to historical reported exploration results is based on, and fairly represents, information and supporting documentation prepared by previous operators and/or extracted from historical reports. The historical exploration results referred to in this announcement were reported prior to the introduction of the JORC Code (2012) and have not been reported in accordance with the JORC Code (2012). A Competent Person has not done sufficient work to disclose the historical exploration results in accordance with the JORC Code (2012). It is possible that following further evaluation and/or exploration work, the accuracy and reliability of the historical exploration results may not be confirmed. The Company has not independently verified the historical exploration results, and no assurance can be given that future exploration work will result in the confirmation or upgrade of the historical results to JORC Code (2012) compliant Mineral Resources or Ore Reserves. The Company considers the historical exploration results to be relevant as they provide an indication of the potential of the project. However, the information should not be relied upon as a representation of the current mineral resource or exploration potential. The technical disclosure in this news release has been approved by Fabien Linares, MSc, MAusIMM, a Qualified Person as defined in JORC 2012. The scientific and technical information summarized in this disclosure and related to historic exploration was reviewed by Mr. Linares and he has visited the Project area. Mr. Linares is Head Geologist of Talisman Metals PLC and has sufficient experience that is relevant to the commodity, style of mineralisation or type of deposit under consideration and activity which he is undertaking to qualify as a Competent Person under the JORC code (2012 Edition). HCl-HNO3-HF Hydrochloric-hydrofluoric acid material that is used in elemental laboratory testing of rock samples. ICP-AES Inductively Coupled Plasma Atomic Emission Spectrometer is a type of elemental analysis used in laboratories. Ppm Parts per million. R² value A statistical measure regarding how well a data set forms a trend.
お知らせ • Apr 29Talisman Metals plc Provides Update on Tirzzit Project Sampling and Exploration ResultsTalisman Metals PLC reported it has collected 7 channel samples at the Tirzzit Project, for a total length of 23m and 38 Trench samples including 5 QAQC samples and 3 Grab samples which have been sent for assaying. The first phase of fieldwork at Tirzzit consists of testing the grade and thickness of mineralisation along strike, from west to east, on outcrop in order to confirm: lateral continuity; historical Copper (Cu) and Silver (Ag) grades; and the location of thicker intervals for channel sampling at approximately 100m spacing, using a Jacob staff to determine true thickness and improve understanding of the controls on mineralisation. The initial 700m of strike targeted a horizon 1 to 5m thick from surface, exhibiting malachite mineralisation at surface amongst the 4.6 kilometres mineralized horizons that has been historically identified. The next phases of sampling will include: continuing channel sampling of the basal series from west to east, from Licence LE393478 to LE393507; channel sampling of the basal series within historical adits developed by the BRPM; conducting mapping of the lower limestone units to identify gossans, followed by grab sampling-initially above historically successful drill holes and subsequently across untested areas; and infill sampling of historical stream sediment coverage within previously untested watersheds. The preparation of a drill programme to redrill historical short holes that have missed mineralisation and drill out open extensions of mineralisation. The Tirzzit Project is a sediment-hosted stratiform Cu-Ag system, located 225km east of the city of Agadir, Morocco. The acquisition transaction of the Project was announced February 16, 2026 from a wholly owned subsidiary of Aya Silver & Gold Inc. (TSX: AYA; OTCQX: AYASF), the Company's 4.7% shareholder. The Project consists of two mining licenses covering a surface area of 16.5km2. Historic drilling results as reported by Moroccan Government agency Bureau of Research and Mining Participations (BRPM) between 1972 and 1976 include drill intersections of 3.16% Cu over 2.5m and 0.60% Cu over 11.4m. Presently the Company is reviewing the extensive BRPM Reports and past collected geophysical data for exploration planning slated to commence in Second Half 2026. Talisman is processing with Aya the formal transfer of the Tirzzit licences on the back of the acquisition agreement announced February 16, 2026. The technical disclosure in this news release has been approved by Fabien Linares, MSc, MAusIMM, a Qualified Person as defined in JORC 2012. The scientific and technical information summarized in this disclosure and related to historic exploration was reviewed by Mr. Linares and he has visited the Project area. Mr. Linares is Head Geologist of Talisman Metals PLC and has sufficient experience that is relevant to the commodity, style of mineralisation or type of deposit under consideration and activity which he is undertaking to qualify as a Competent Person under the JORC code (2012 Edition). The information in this announcement that relates to historical reported exploration results is based on, and fairly represents, information and supporting documentation prepared by previous operators and/or extracted from historical reports. The historical exploration results referred to in this announcement were reported prior to the introduction of the JORC Code (2012) and have not been reported in accordance with the JORC Code (2012). A Competent Person has not done sufficient work to disclose the historical exploration results in accordance with the JORC Code (2012). It is possible that following further evaluation and/or exploration work, the accuracy and reliability of the historical exploration results may not be confirmed. The Company has not independently verified the historical exploration results, and no assurance can be given that future exploration work will result in the confirmation or upgrade of the historical results to JORC Code (2012) compliant Mineral Resources or Ore Reserves. The Company considers the historical exploration results to be relevant as they provide an indication of the potential of the project. However, the information should not be relied upon as a representation of the current mineral resource or exploration potential.
お知らせ • Feb 25Talisman Metals plc Announces Commencement of Exploration Work At Fougnar Cu-Ag ProjectTalisman Metals PLC announced the commencement of a preliminary exploration programme at its Fougnar Copper-Silver Project (the "Project") within the Tizert group of licenses that Talisman recently acquired. The exploration work is focused on improving the Company's understanding of structural geography at the Project and establishing drill-ready targets for subsequent campaigns later in 2026. The exploration programme integrates trenching, ground geophysics, and stream sediment sampling, designed to define priority targets across the Project area. Additionally, a modest scout drill work program will be conducted to improve Project stratigraphy understanding. Exploration Programme Overview 1-Ground geophysics, 2 phases: Phase 1: Transient Electromagnetics (TEM) surveys on a 250m x 250m grid over the southern permit area and Higher-Resolution TEM surveys on a 250m x 100m grid over the northern permit area to map out structures that control mineralisation (Paleorelief of basement rock) and resistive profiles to track conductive "horizons" up to 500m deep. Phase 2: Four-pole dipole-dipole Induced Polarisation (IP) 1km profiles across priority targets in the northern permit area to track mineralised/conductive and chargeable sulphide rich horizons up to 300m deep. Scout reverse circulation drilling to test geological stratigraphy associated with mapped data and outcropping Cu-Ag down dip from previous trench results (FO-CH09 with 1.1m @ 1.16% Cu and 53g/t Au, FO-CH02 with 0.6m @ 0.41% Cu and FO-CH04 0.7m @ 0.70% Cu and 17g/t Au. Geological Rationale The current programme is designed to test both strike and depth continuity of mineralised Cu-Ag zones and to assess the broader prospectivity of the Project area. Next steps Mobilisation and field activities have commenced and will be completed over the coming weeks. Results from trenching, geophysics, and geochemical sampling will be used to refine drill targets, with further updates to be provided as data become available. The technical disclosure in this news release has been approved by Fabien Linares, MSc, MAusIMM, a Qualified Person as defined in JORC 2012. The scientific and technical information summarized in this disclosure and related to historic exploration was reviewed by Mr. Linares and he has visited the Project area. Mr. Linares is Head Geologist of Talisman Metals PLC and has sufficient experience that is relevant to the commodity, style of mineralisation or type of deposit under consideration and activity which he is undertaking to qualify as a Competent Person under the JORC code (2012 Edition). Mineralisation observed in the outcropping sedimentary host units on Trench CH09 (left). Malachite and Azurite (copper-carbonate) mineralisation from FO-CH09 (left).
お知らせ • Feb 12Talisman Metals PLC Appoints Fabien Linares as Head GeologistTalisman Metals PLC announced it has appointed Fabien Linares as Head Geologist. Mr. Linares is a professional geologist with 20 years of experience and is a member of the AusIMM with a Master's Degree in management of Geo Resources from ENSEGID - Bordeaux INP. His most recent work was with SRK Consulting UK where he managed a 30-drill-rig exploration program for resource generation in Saudi Arabia. His career includes previous roles at CSA Global, Endeavour Mining Corporation and Fortescue Metals Group. Mr. Linares has extensive experience working throughout Africa managing exploration and resource development programs.