お知らせ • Apr 11
Arika Resources Limited Reports Assay Results from the Recently Completed Diamond Drilling Campaign At the Pennyweight Point Prospect
Arika Resources Limited reported assay results from the recently completed diamond drilling campaign at the Pennyweight Point Prospect, part of the Yundamindra Gold JV Project, located 65km south-west of Laverton in the world-class Eastern Goldfields mining district of Western Australia. The most recent drilling program completed at Pennyweight Point comprised two diamond cored drill-holes (25YMD001 and 25YMD002) for a combined total of 376.40m (96.3m of mud rotary pre-collaring and 280.10m of HQ diamond coring). This diamond drill program has now confirmed the presence of gold mineralisation at Pennyweight Point continuously over a strike length of at least 350m and to at least 150m down-dip. Verification of sampling and assaying, The verification of significant intersections by either independent or alternative company personnel., The use of twinned holes., Documentation of primary data, data entry procedures, data verification, data storage (physical and electronic) protocols., Discuss any adjustment to assay data., No umpire analysis has been performed., Data was collected on to standardised templates in the field and data cross checks were performed verifying field data and assay results., No adjustment to the available assay data has been made. For all intercepts, the first received assay result is always reported., Intersections reported are checked and verified by alternative company personnel typically Senior Supervising Geologists and the Exploration Manager/GM-Exploration., Location of data points, Accuracy and quality of surveys used to locate drill holes (collar and down-hole surveys), trenches, mine workings and other locations used in Mineral Resource estimation., Specification of the grid system used., Quality and adequacy of topographic control., Drillhole collars are captured initially using handheld Garmin GPS unts with an accuracy of +/- 5 metres., Drill hole collars will be surveyed using a DGPS., GDA94 Zone 51 grid system was used, collars will be picked up by a qualified surveyor using a DGPS (Trimble S7). The surveyed collar coordinates are sufficiently accurate and precise to locate the drillholes, Data spacing and distribution, Data spacing for reporting of Exploration Results., Whether the data spacing and distribution is sufficient to establish the degree of geological and grade continuity appropriate for the Mineral Resource and Ore Reserve estimation procedure(s) and classifications applied., Whether sample compositing has been applied., The program is early stage exploration and the drillhole spacing is relatively wide., Mineral Resource Estimates are not currently being undertaken., No mineral classification is applied to the results at this stage., No sample compositing has been applied, Orientation of data in relation to geological structure, Whether the orientation of sampling achieves unbiased sampling of possible structures and the extent to which this is known, considering the deposit type., If the relationship between.