お知らせ • May 05
Go Metals Corp. announced that it expects to receive CAD 0.2 million in funding Go Metals Corp. announced a non-brokered private placement to issue 4,000,000 units at an issue price of CAD 0.05 for gross proceeds of CAD 200,000 on May 4, 2026. Each unit will consist of one common share and one-half of one common share purchase warrant. Insiders may participate in the private placement to support the financial position of the corporation. Each whole warrant will entitle the holder to acquire one additional Share at an exercise price of CAD 0.10 per share for a period of two years from the date of issuance. The securities issued in connection with the private placement will be subject to a statutory hold period of four months and one day from the date of issuance in accordance with applicable securities laws. Completion of the private placement remains subject to receipt of all necessary regulatory approvals. The company may pay finder’s fees in connection with the private placement in accordance with applicable securities laws. お知らせ • Jul 21
Go Metals Corp., Annual General Meeting, Sep 25, 2025 Go Metals Corp., Annual General Meeting, Sep 25, 2025. New Risk • Nov 17
New major risk - Financial position The company has less than a year of cash runway based on its current free cash flow trend. Free cash flow: -CA$1.7m This is considered a major risk. With less than a year's worth of cash, the company will need to raise capital or take on debt unless its cash flows improve. This would dilute existing shareholders or increase balance sheet risk. Currently, the following risks have been identified for the company: Major Risks Less than 1 year of cash runway based on free cash flow trend (-CA$1.7m free cash flow). Share price has been highly volatile over the past 3 months (38% average weekly change). Earnings have declined by 21% per year over the past 5 years. Revenue is less than US$1m. Market cap is less than US$10m (CA$1.33m market cap, or US$946.1k). Minor Risk Shareholders have been diluted in the past year (4.3% increase in shares outstanding). お知らせ • Jul 17
Go Metals Corp., Annual General Meeting, Sep 24, 2024 Go Metals Corp., Annual General Meeting, Sep 24, 2024. New Risk • May 20
New minor risk - Shareholder dilution The company's shareholders have been diluted in the past year. Increase in shares outstanding: 4.3% This is considered a minor risk. Shareholder dilution occurs when there is an increase in the number of shares on issue that is not proportionally distributed between all shareholders. Often due to the company raising equity capital or some options being converted into stock. All else being equal, if there are more shares outstanding then each existing share will be entitled to a lower proportion of the company's total earnings, thus reducing earnings per share (EPS). While dilution might not always result in lower EPS (like if the company is using the capital to fund an EPS accretive acquisition) in a lot cases it does, along with lower dividends per share and less voting power at shareholder meetings. Currently, the following risks have been identified for the company: Major Risks Share price has been highly volatile over the past 3 months (22% average weekly change). Earnings have declined by 24% per year over the past 5 years. Revenue is less than US$1m. Market cap is less than US$10m (CA$2.27m market cap, or US$1.67m). Minor Risk Shareholders have been diluted in the past year (4.3% increase in shares outstanding). お知らせ • May 17
Go Metals Corp. announced that it has received CAD 0.1 million in funding On May 15, 2024, Go Metals Corp closed the transaction. The Company has paid a finder’s fee of CAD 6,999.99 and it issued 77,777 non-transferable finder’s warrants to one qualified party in connection with the FT Common Share Financing. The FT Shares issued under the FT Common Share Financing shall be subject to a four-month and a day hold period expiring September 16, 2024, pursuant to applicable securities laws of Canada. お知らせ • Feb 01
Go Metals Corp. Announces Results from Airborne EM Survey At KM98 Go Metals Corp. announced the results of the processed airborne geophysical survey from KM98 critical metal project on the Cote-Nord of Quebec. Large 4100 metre by 1,600 metre (3.2km2) anomaly at KM98. Higher EM amplitudes compared to HSP. KM98 anomaly is ten times the footprint of Chamber North. Anomalies are clustered along the southern contact of the anorthosite. Property is accessible by paved road, year-round. Go Metals President and Chief Executive Officer, Scott Sheldon, commented: "Time domain electromagnetic surveying detects conductive material including certain sulphides and massive oxides. The connected nature and mineralogy of the metallic minerals allow them to conduct electricity and be detected using electromagnetic techniques. Airborne EM can detect massive sulphide mineralization by transmitting a current pulse through a transmitter loop towed by a helicopter. As the resulting magnetic field moves through the earth it induces an electrical field within any conductive bodies that it passes through. This new electrical field in turn generates a magnetic field which is detected by receiver coils mounted within the transmitter loop. This method can detect conductive minerals to depths of hundreds of metres. The survey was conducted by Balch Exploration Consulting Inc. and undertaken in October of 2023 at both HSP and KM98. In addition to the large conductor highlighted in this news release, six new strong conductors (based on amplitude and time decay) were detected. お知らせ • Jan 23
Go Metals Announces RC Drill Results at HSP Property Go Metals Corp. announced results from the recent critical metals drilling program from its HSP Property located on the Côte-Nord of Québec. Notable Drill Results: HSPRC23-001 intercepted the same mineralized structure intercepted in 2022 at Red Mountain and extends the strike length to at least 40m and down-dip length of 57m starting at surface. The structure remains open along strike to the northwest, southeast and down-dip. Future plans include exploring for zones where the structure widens to determine if it is part of a larger sulphide system. HSPRC23-003 intercepted up to 0.32% Ni Eq over 1.5m, which is the highest grade intercept discovered to date at Chamber North. These results highlight the potential for the large 500m by 700m target. Moving forward, special attention will be paid to identify the processes that increase sulphide concentration within the anorthositic magma chamber to vector higher grade mineralized zones within the target. Samples were taken for each 5-foot RC rod. The chips were put through a splitter that collects 40% as a sample. The sample is run through the splitter again to keep a duplicate in case samples need to be re- assayed. Duplicates, standards and blanks were inserted at regular intervals within the sample sequence for validation purposes. Results for all QAQC samples were deemed acceptable, except for one isolated sample. Re-assay was not required. A handheld X-ray fluorescence analyzer ("XRF") was used on site for the RC drill samples during the program. The XRF results were compared with assayed values for nickel and copper. Both base metals had average absolute errors over 50% and thus can currently only be used as a rough guide. お知らせ • Dec 07
Go Metals Corp. Announces Board Changes Go Metals Corp. announced that Mr. Adrian Smith has resigned from the board of directors and Mr. Harley Slade has been appointed in his place effective immediately. Mr. Slade is currently President of Caveman Exploration. He first started working with Go Metals in 2018 and has since worked on company projects in both the Yukon and Quebec. Mr. Slade holds a degree in Geology from Simon Fraser University. New Risk • Dec 01
New major risk - Financial position The company has less than a year of cash runway based on its current free cash flow trend. Free cash flow: -CA$2.2m This is considered a major risk. With less than a year's worth of cash, the company will need to raise capital or take on debt unless its cash flows improve. This would dilute existing shareholders or increase balance sheet risk. Currently, the following risks have been identified for the company: Major Risks Less than 1 year of cash runway based on free cash flow trend (-CA$2.2m free cash flow). Share price has been highly volatile over the past 3 months (32% average weekly change). Earnings have declined by 18% per year over the past 5 years. Revenue is less than US$1m. Market cap is less than US$10m (CA$1.02m market cap, or US$753.2k). お知らせ • Oct 17
Go Metals Corp. Mobilizes the Drill to the HSP Nickel-Copper Project, North of Havre-Saint-Pierre on the Cote-Nord of Quebec Go Metals Corp. announced the Company has mobilized the drill to the HSP nickel-copper project, north of Havre-Saint-Pierre on the Cote-Nord of Quebec. Highlights: Completed 200 square kilometres AirTEM survey; RC drill program based on UTEM ground survey; Drill targets include Red Mountain, Chamber, and PGE. お知らせ • Sep 22
Go Metals Corp Provides Update on Geophysics and Ground Program at HSP Nickel- Copper Project Go Metals Corp. announced that the Company is currently conducting airborne geophysics at the HSP nickel- copper project, north of Havre-Saint-Pierre on the Côte-Nord of Quebec. お知らせ • Jul 14
Go Metals Corp., Annual General Meeting, Sep 26, 2023 Go Metals Corp., Annual General Meeting, Sep 26, 2023. お知らせ • Feb 08
Go Metals Corp. Announces That the Company Is Working with Contractors and Local First Nations to Plan the Phase 2 Drill Program At HSP Go Metals Corp. announced that the Company is working with contractors and local First Nations to plan the Phase 2 drill program at HSP ("the Property"). The Company is assessing drill site locations for four priority targetswith associated access requirements and logistics. The fully funded Phase 2 diamond drilling will work to expand known mineralization at the 100%-owned HSP Nickel-Copper Sulphide Project, located 130 kilometers north of Havre-Saint-Pierre, Quebec. お知らせ • Jan 26
Go Metals Corp. Hits Nickel-Copper-Cobalt Mineralization At All Targets Go Metals Corp. has successfully intersected nickel-copper mineralization on all targets as part of the first-ever drilling program. Chamber South encountered alternating layers of moderately southwest dipping massive sulphide/oxides interlayered with anorthosite. Increasing levels of sulphides and base metals down hole in both 01 and 02 indicate potential to improve with depth. Drilling at Chamber South was the only pad to drill from the optimal direction intercepting surface structures and will be a priority drill target for phase 2. Chamber North drilling intercepted anomalous disseminated nickel, copper, and cobalt mineralization over the vast majority of the holes. The best intercept was in HSP-22-05 with 73m of 0.046% Ni, 0.033% Cu and 0.009% Co. The large size of Chamber North (28 Ha or 70 acres) has comparable metal equivalents to porphyry grade mineralization. As disseminated sulphides of the concentrations seen in the drill holes are not typically able to create strong EM anomalies, further trench testing east-west across foliation will help to determine the location of any higher-grade sulphides and better test the massive sulphide layers seen at surface. Red Mountain Zone HSP-22-06,07 The drill targeting missed the surface mineralization based on the dip calculations obtained from drilling but identified a new high-grade nickel copper bearing sulphide structure at depth up to 1.3% Cu and 0.4% Ni. Given the high grades, large EM anomaly and relatively low sulphide content in the intervals, this target is highly prospective. Drilling intercepted narrow bands of massive sulphide pseudobreccia averaging 25cm wide. These holes contain the highest concentration of base metals in the sulphides from the drill program. The drill holes confirm the mineralization has similar apparent orientations as seen on the rest of the project, and therefore will be tested from the west drilling east in phase 2. PGE Zone - HSP-22-08,09,10,11 The PGE target zone covers a large area over 3km along the northern contact and is dispersed over four targets including Central, North, South and Catalytic. PGE Central showed some of the highest sulphide content with up to 45% sulphides. One highlight was the 10-metre massive sulphide breccia at 0.34% Ni, 0.31% Cu and 0.05% Co from 51 metres. Armed with a better understanding of the mineralized trend orientation, this target is a high priority for the phase 2 program. PGE North failed to return significant grades as reported in the Company's news release dated January 9, 2023. This target remains prospective based on the knowledge that the drill was underneath the intended surface target. Follow up testing will be performed on this target after the PGE Central is explored in more detail, as both targets share similar geology. PGE South remains untested as priority was given to the two northern PGE targets. Like PGE North, this target remains prospective and will be tested once more geological knowledge is derived from PGE Central. PGE Catalytic is also an untested target between Central and North. Catalytic is a different as it covers a mafic dyke visible in total magnetic intensity with Cu, Ni and PGE mineralization along both it's east and west margins. The Dyke can be traced for 3.5 km. GEM Zone Untested The interior anorthosite hosts the GEM zone that was not tested in the 2022 drill program. This zone is slated for mechanised surface trenching in 2023. Mineralization at GEM is disseminated but contained high nickel and copper grades which has potential to widen prospectivity to weaker EM anomalies within the anorthosite. お知らせ • Jan 10
Go Metals Corp. Announces Results from the New PGE Zone Discovery on the HSP Exploration Stage Nickel-Copper-Cobalt (Ni-Cu-Co) Sulphide Project Located in Quebec Go Metals Corp. announced results from the new PGE zone discovery on the HSP exploration stage nickel-copper-cobalt (Ni-Cu-Co) sulphide project located in Quebec (the "HSP"). The PGE Zone is located on the Northern contact of the anorthosite complex. The Zone is comprised of 4 targets confirmed by surface sampling in 2021. The targets include PGE South, PGE Central, PGE North and Catalytic (CC). This release updates drilling results from 2022 and reports on drill holes from both PGE-Central and PGE-North. The conductors are elongated in the north south direction and are clustered along the northern contact of the anorthosite. Future drilling from the West is planned to test the related sub-surface Ni-Cu sulphide structures as well as the mineralization seen at surface. Thin section SEM analysis of surface samples collected in 2021 by IOS Geoscientific revealed most nickel is contained in pentlandite. Elevated platinum, palladium and cobalt are associated with higher nickel values and pentlandite, while elevated gold correspond to higher copper values and chalcopyrite. This favourable mineralogy adds to the economic potential of the system. HSP-22-09 PGE Central Target encountered layers of moderately dipping foliated anorthosite and gabbro layers. The darker pyroxene-rich gabbro layers have varying amounts of sulphide mineralization and exhibit net/emulsion textures as well as sulphide massive ore breccia texture (SMOB). As expected, higher grade intervals contained more sulphur than lower grades with 4 samples returning over 10% S. Total sulphide component can be estimated using geochemical results. There is significant variation within intercepts ranging up to 45% sulphide with the higher base metal grades. HSP-22-11 PGE North Target intercepted three short intervals above cut-o totalling 5.85m over the drill hole. These intercepts exhibit similar textures to those at PGE C suggesting the two targets are related. The concentration of sulphides seen in these two drill holes is lower than expected given the size and magnitude of the PGE N EM anomaly. This leads the team to believe the major conductors were not intercepted on the PGE North target. With two complete holes from each target the company can delineate an apparent dip from each of the structures by connecting marker "layers". A mineralized horizon containing nickel-copper and cobalt was intercepted in both holes HSP-22-08 and HSP-22-09 that delineates a 33 degree apparent dip to the west. This orientation does not connect to the surface showings so is interpreted as a newly discovered mineralized zone and the surface showings remain untested at depth. All drill holes at the PGE Zone contain widespread anomalous base metal content above and below the intercepts. The phase 2 program will help further define the size of the mineralized bodies and if the targets are connected at depth. The company expects to report further outstanding drill results starting with the Chamber N and S targets (HSP-22-01, 02, 04, 05), followed by Red Mountain (HSP-22-06, 07) in subsequent releases. The Chamber targets are EM anomalies on the southern contact of the anorthosite intrusion. Visual results showed Chamber South has over 20m of semi-massive to massive sulphide intercepts and the large Chamber North target had two 100m+ intercepts with disseminated sulphides. Red Mountain is a target on the northern contact where the company sampled the highest nickel and copper grades for the 2021 program. Sample selection is based on visual occurrences of sulphides. Selected intervals were half-cut with a diamond rock saw in IOS facility in Saguenay and the consistent half was sent to ALS-Minerals laboratories in Val D'Or. Samples were crushed at 70% -2mm, split to 500 grams, and pulverized at 90% -70 um (Method Prep-31). Base metal assays were made by ICP-AES a er aqua-regia digestion (method ME-ICP-61). Gold, platinum, and palladium were assayed by fire-assay on lead bead on 30 grams load, with ICP-MS finishing (method PGM-ICP23). ALS is an ISO-17025 accredited facility. Quality control procedure included the insertion prior to shipment of barren quartz material as sample blanks (7.3% of sample) as well as certified reference material (OREAS-86, PTC-1a, WMS-1a, 13.8% of samples). Samples were analysed using four acid digestion and ICP-AES finish. PGE and Au values are determined through fire assay PGM-ICP23. Rigorous QAQC protocols were used including standards and blanks at the start and end of lab sample sheets as well as with insertion at regular intervals. お知らせ • Dec 06
Go Metals Corp. Announces Preliminary Results as Part of New Discovery on HSP Exploration Stage Nickel-Copper-Cobalt Sulphide Project Located in Quebec Go Metals Corp. announced preliminary results as part of a new discovery on the HSP exploration stage nickel-copper-cobalt (Ni-Cu-Co) sulphide project located in Quebec (the HSP). HSP-22-08 PGE Central Target encountered two intercepts. A 10 metre massive sulphide breccia at 0.34% Ni, 0.31% Cu and 0.05% Co from 51 metres downhole (including 1m of 0.69% Ni, 0.62% Cu, and 0.11% Co) and a lower-grade, wider semi-massive sulphide interval of 16 metres along the hole of 0.13Ni%, 0.17% Cu and 0.02% Co from 29 metres downhole. Core logging and interpretation show variation in sulphide body thickness, widening at depth to the west. HSP-22-10 PGE North Target intercepted anomalous nickel, copper, and cobalt values from 6m to 57.8 metres downhole averaging 290ppm Ni, 159ppm Cu and 65ppm Co. One notable intercept within the hole included 1.6 metres along the hole of 0.19% Ni, 0.15% Cu and 0.03% Co. The results indicate the 440m by 220m wide conductive anomaly is caused by nickel-copper-cobalt sulphide mineralization which has yet to be properly tested with drilling. HSP-22-03 Chamber South Target was an abandoned hole that did not reach the target. The hole was increasing in nickel copper content towards the target with a 2.2 metres ilmenite-magnetite rich layer including >10% titanium (Ti) and 27% iron (Fe) with anomalous base metal values (558ppm Ni, 395ppm Cu, 160ppm Co). Initial drilling at the PGE Central Zone shows the nickel bearing horizons are occurring parallel or sub- parallel with the contact of the anorthosite and gneissic host rock. With the maiden drilling program complete (additional assays pending) it is now apparent that the major mineralization trend follows this orientation. This new understanding of the regional geology indicates that the original PGE Central discovery mineralization at surface was not properly tested. By incorporating this new information into the evolving geological model at the Property, the upcoming and fully funded Phase 2 drilling program will be well situated to further advance the understanding of this brand-new nickel district. Sampling, Assays and QAQC: Sample selection is based on visual occurrences of sulphides. Selected intervals were half-cut with a diamond rock saw in IOS facility in Saguenay and the consistent half was sent to ALS-Minerals laboratories in Val D'Or. Samples were crushed at 70% -2mm, split to 500 grams, and pulverized at 90% -70 um (Method Prep-31). Base metal assays were made by ICP-AES after aqua-regia digestion (method ME-ICP-61). Gold, platinum, and palladium were assayed by fire-assay on lead bead on 30 grams load, with ICP-MS finishing (method PGM-ICP23). ALS is an ISO-17025 accredited facility. Quality control procedure included the insertion prior to shipment of barren quartz material as sample blanks (7.3% of sample) as well as certified reference material (OREAS-86, PTC-1a, WMS-1a, 13.8% of samples). Samples were analysed using four acid digestion and ICP-AES finish. PGE and Au values are determined through fire assay PGM-ICP23. Rigorous QAQC protocols were used including standards and blanks at the start and end of lab sample sheets as well as with insertion at regular intervals. お知らせ • Nov 18
Go Metals Corp. announced that it has received CAD 2.188606 million in funding On November 17, 2022, Go Metals Corp. closed the transaction. Board Change • Nov 16
Insufficient new directors No new directors have joined the board in the last 3 years. The company's board is composed of: No new directors. 1 experienced director. 3 highly experienced directors. Independent Director Adrian Smith was the last director to join the board, commencing their role in 2015. The company’s insufficient board refreshment is considered a risk according to the Simply Wall St Risk Model. お知らせ • Nov 01
Go Metals Corp. announced that it expects to receive CAD 1.5048 million in funding Go Metals Corp. announced a non-brokered private placement of up to 1,200,000 flow-through units at issue price of CAD 1.254 per flow-through unit for gross proceeds of CAD 1,504,800 on October 31, 2022. Each flow-through unit consist of one common share and one-half of one common share purchase warrant. Each warrant will entitle the holder to acquire one common share of the company at a price of CAD 1 per share for a period of 24 months from the closing. The company will pay cash finders’ fee of 8% and issued finders’ warrants of 8% of the flow-through units placed. The transaction is subject to receipt of all regulatory approvals including the approval of the Canadian Securities Exchange. All the securities to be issued is subject to a hold period of four months and one day from the closing. お知らせ • Sep 14
Go Metals Intersects Wide Intervals of Nickel and Copper Sulphides Go Metals Corp. announced nickel and copper sulfides have been visually identified at all five zones from the first ever drilling at the 100% owned HSP Nickel-Copper PGE Project, Quebec, Canada (the "Property"). The program has completed 1,250 metres of drilling to date and initial samples have been sent for analysis at an independent laboratory to be assayed for nickel, copper, platinum, and palladium content. Program Initial Highlights: 5 targets with confirmed visual nickel-copper mineralization all beginning near surface; Drilling intersected wide intervals of mineralization in 5 zones and all remain open to depth; Massive and semi-massive mineralization total of 21 metres in HSP-DDH-22-02; Disseminated mineralization intercept of 175 metres in HSP-DDH-22-04 Established consistent preliminary structural orientation of mineralized zones. The 100% owned project was initially staked by the company over historical showings in 2019. The company has since expanded the footprint of the project to total 1502 kilometres covering the north and south contacts of the western portion of the Havre-Saint Pierre anorthosite complex. Results todate support and indicate the geological model of a primary magmatic nickel-copper-cobalt-PGE mineralized system. The geological model for mineralization and 3D modelling is currently being developed by the Company.The mineralized system is interpreted to remain open along strike and at depth. The company believes the presence of nickel-copper bearing sulphides at depth under all the large EM anomalies warrants significantly more drilling. お知らせ • Aug 12
Go Metals Corp. Begins Drilling At HSP Nickel-Copper PGE Project Go Metals Corp. announced the 2022 diamond drilling program has started at the HSP Nickel-Copper PGE Project, Quebec, Canada (the "Property"). The 150 square kilometre property is within 15 kms of a Quebec Hydro maintained access road and the new Romaine IV hydroelectric facility. The 2022 drilling program will target six zones concentrated along regional geological contacts between the Havre-Saint-Pierre anorthosite and adjacent ferro-diorite/gneiss units. Targets include: Chamber South: Large Electromagnetic ("EM") anomaly and relatively high-grade nickel and copper bearing massive sulphides at surface. Chamber North: Significant 1.2 kilometre by 900 metre conductive anomaly, with a highly conductive core measuring 550 metres by 450 metres. Red Mountain: High-grade nickel and copper sampled in test pits directly on top of a 450 metre by 140 metre EM anomaly. PGE Central and North: Significant platinum group elements, gold, and cobalt occur in with the nickel and copper sulphide mineralization. PGE Central yielded the highest, most consistent sulphide grades of the PGE targets. Catalytic: High-grade Copper, Nickel, and PGE mineralization along both east and west margins of potential intrusion identified in magnetic survey. The Red Mountain, PGE and Catalytic targets are all located along the western margin of the anorthosite Complex which represents a 5 km-long high potential trend. Overall, the property holds 15 km of anorthosite-gneiss contact, which represents the conceptual geological target. Drill core is being logged and sampled in the field and the samples will be sent to ALS Geochemistry Lab in Val d'Or, Quebec for independent analysis as they are processed. Further updates will be released as they become available. HSP represents a unique nickel-copper sulphide project as all targets are invisible to magnetic geophysics. A 60 square kilometre AirTEM survey in 2019 identified a group of conductive target. The 2021 follow up confirmed massive to semi-massive sulphide mineralization at surface for all targets. お知らせ • Jul 30
Go Metals Corp., Annual General Meeting, Sep 28, 2022 Go Metals Corp., Annual General Meeting, Sep 28, 2022. Location: 810-789 West Pender Street Vancouver British Columbia Canada Board Change • Jul 05
Insufficient new directors No new directors have joined the board in the last 3 years. The company's board is composed of: No new directors. 1 experienced director. 3 highly experienced directors. Independent Director Adrian Smith was the last director to join the board, commencing their role in 2015. The company’s insufficient board refreshment is considered a risk according to the Simply Wall St Risk Model. お知らせ • May 10
Go Metals Corp. announced that it has received CAD 0.600001 million in funding Go Metals Corp. announced a non-brokered private placement of 2,000,003 quebec flow-through shares at a price of CAD 0.30 per share for the gross proceeds of CAD 600,000.09 on May 9, 2022. GloRes Securities Inc. acted as the lead finder in the transaction. The company paid a finder's fees of CAD 42,000 cash and 140,000 warrants have been paid to qualified parties. Each warrant entitles the holder thereof to purchase one common share of the company at a price of CAD $0.30 for a period of 24 months from the date of issuance. All securities issued in the transaction are subject to a statutory hold period of four months and one day from the date of issuance. Board Change • Apr 27
Insufficient new directors No new directors have joined the board in the last 3 years. The company's board is composed of: No new directors. 1 experienced director. 3 highly experienced directors. Independent Director Adrian Smith was the last director to join the board, commencing their role in 2015. The company’s insufficient board refreshment is considered a risk according to the Simply Wall St Risk Model. お知らせ • Apr 08
Go Metals 2.4 Km Drill Program At Nickel-Copper Sulphide Project Go Metals Corp. announced that it has contracted IOS Services Geoscientifiques inc. as project operator for the planned 2,400 metres summer diamond drill campaign at the flagship Quebec nickel-copper sulphide project. North Contact Zone The north contact zone includes the PGE targets and Red Mountain. These targets include a total of 10 diamond drill holes. PGE zones are characterized by remobilized sulphides within large ultramafic dykes. Mineralization occurs as Nickel-Copper sulphide matrix within the brecciated dykes and grades ranging from 0.4% to 1.8% Ni and 0.5% to 4.0% Cu. The main base metal bearing sulphides are Chalcopyrite and Pentlandite, both of which are excellent in terms of metal recoverability. South Contact Zone The south contact zone includes both Chamber targets and GEM. These are large conductive bodies that correlating to massive sulphides at surface. Grab samples show cumulate and grain-resorption textures suggesting a primary magmatic origin. Observed grades from the 5 grab samples at Chamber averaged 0.3% for both Ni and Cu with large volume potential. The conductive anomaly at Chamber N is over 35 Ha and is present in all EM time domains. 2022 HSP Drilling Program The goal of the summer exploration program is to identify near-surface nickel, copper, cobalt and PGE mineralization. All targets were confirmed to have massive and semi-massive sulphide mineralization at surface in the 2021 exploration program announced August, 2021. お知らせ • Aug 31
Go Metals Corp. Announces Results from the HSP Project, A Polymetallic Property with Nickel, Copper, and PGE Mineralization in Eastern Quebec Go Metals Corp. announced results from the HSP project, a polymetallic property with nickel, copper, and PGE mineralization in eastern Quebec. Highlights: 4 New nickel-copper showings discovered, Grab samples with up to 1.78% Ni and 3.97% Cu, Program showcases accuracy of the GeoDL artificial intelligence engine, Average Nickel equivalent of 0.54% over 25 samples, Anomalous to enriched cobalt, gold, silver, platinum, palladium and 50 new HSP claims staked to increase total land package to 8,250 Hectares. Geological context: The HSP property is in the Quebec Havre St. Pierre Anorthosite Complex. All showings but the Gem showings are in structurally controlled semi- to massive sulphides in mafic- to ultramafic units that occur on the edge of the anorthosite complex. The PGE Zone is characterized by massive to semi massive sulphides adjacent to ultramafic pyroxenite dykes and typically has higher PGE concentrations. The Chamber Zone is characterized by large pods of massive pyrrhotite and chalcopyrite within EM anomalies up to 400m wide at surface. These are interpreted as potential pockets or irregularities in the magma chamber where immiscible sulphide rich melt accumulated within the anorthosite complex. The Red Mountain showing exhibits traits of both the PGE and the chamber zones. It is characterized by a large body of massive sulphides but also seems to be related to adjacent pyroxenite dykes. The Gem showing overlies a magnetic high interpreted as a possible magmatic conduit within the anorthosite complex. Director Overboarding • Aug 27
Director Adrian Smith has joined 5th company board Independent Director Adrian Smith has been appointed to the board of Usha Resources Ltd. (TSXV:USHA). Smith now sits on a total of 5 company boards. With 5 board positions including the role of CEO at ArcPacific Resources Corp. (TSXV:ACP), the director is at risk of having too many board obligations according to the Simply Wall St Risk Model. Director Overboarding • Aug 27
Director Adrian Smith has joined 5th company board Independent Director Adrian Smith has been appointed to the board of Usha Resources Ltd. (TSXV:USHA). Smith now sits on a total of 5 company boards. With 5 board positions including the role of CEO at ArcPacific Resources Corp. (TSXV:ACP), the director is at risk of having too many board obligations according to the Simply Wall St Risk Model. お知らせ • Aug 20
Go Metals Corp. announced that it has received CAD 0.15 million in funding Go Metals Corp announced a non-brokered private placement of unsecured convertible promissory notes for gross proceeds of CAD 150,000 on August 19, 2021. The notes are unsecured and bear interest at a rate of 8% per annum with a maturity date of August 19, 2023. Each holder shall have the right at its option to convert all or a portion of the principal amount of the notes and the accrued and unpaid interest on the principal amount outstanding under the notes into units at a conversion price of CAD 0.25 per unit. Each unit is comprised of one common share and one common share purchase warrant. Each warrant will entitle the holder thereof to acquire one additional Share at a price of CAD 0.30 for a period of two years from the date the warrant is issued. The transaction included participation from two insiders for proceeds of CAD 100,000. All securities issued in connection with the Private Placement and the Settlement Agreement will be subject to a four-month hold period under securities laws. お知らせ • Jun 25
Go Metals Corp. Updates Exploration Progress from the HSP Polymetallic Battery Metals Project in Eastern Quebec Go Metals Corp. updated exploration progress from the HSP polymetallic battery metals project in eastern Quebec. Highlights: Five new massive to semi-massive sulphide showings uncovered. All geophysical anomalies associated with sulphides mineralization at surface. New 150m x 25m mineralization uncovered at surface. Showings are surrounded by disseminated sulphide mineralization. Ultramafic dykes uncovered and potentially associated with PGE mineralization. Successful field-test of AI augmented bedrock mapping tools. Largest airborne detected conductor is 400m x 200m. Massive to semi-massive sulphide mineralization occurs at surface at eight geophysical anomalies on the HSP claim. Five of the surface showings are newly discovered. Mineralization occurs as bravoite, chalcopyrite, bornite, and possibly pentlandite in a groundmass of pyrrhotite. Ground geophysical tools were used to assess the conductivity of bedrock around the new and historic showings. The largest new showing is conductive over 150m strike length and average width of roughly 25m. The largest geophysical anomaly on the claim, a 400m X 200m conductor detected from the airborne survey, is untested below thicker cover and remains a priority drill target. The exploration program at HSP marks the first field test of Go Metals' proprietary augmented exploration tools. The system generated bedrock maps proved to be more accurate than maps based on ground geophysics or government mapping alone. The AI bedrock map is an important step towards accurately predicting other geological features, such as faults, prospectivity and mineralization. The AI tools are a step for the company towards providing better ESG management through improved low impact exploration techniques. The 100% owned HSP Project was acquired in February 2019 and covers 55 km2. The property is located approximately 135 km north of Havre-Saint-Pierre. HSP contains several mineral occurrences with elevated nickel, copper, cobalt, gold and PGE. A Quebec hydro road comes within 10 km of the Property. The new Romaine-IV hydro-electric project is in close proximity to the property. Field crews have demobilized from a separate field program in Quebec on the company's new joint venture project. Ashuanipi contains numerous AI targets over banded iron formations. The targets were generated by Windfall Geotek after an expansive 330,000 km AI mining study of eastern Quebec. The project is northeast of Schefferville in the Ashuanipi complex, on the edge of the Superior Province. The initial phase tested targets using till sampling, channel sampling and ground geophysics. お知らせ • May 16
Go Metals Corp. Mobilizes Crews to Havre-Saint-Pierre, Quebec in Preparation for Two Early-Season Programs Go Metals Corp. ("Go Metals" and/or the "Company") has mobilized crews to Havre-Saint-Pierre, Quebec in preparation for two early-season programs. Exploration will begin on the HSP nickel and copper project. On completion, crews will travel to the Ashuanipi gold project. After the initial pass on the HSP claims field crews will mobilize again to Schefferville for work on the Ashuanipi gold claims which are under an earn-in agreement with Flow Metals. An advanced exploration permit has gone through initial public consultations and is currently pending a decision from YESAB and Mining Lands. お知らせ • Jan 06
Go Metals Corp. Provides an Update Regarding the Exploration on Both Its 100% Owned Monster Iocg Project Go Metals Corp. provides an update regarding the exploration on both its 100% owned Monster IOCG project in the traditional territory of the Tr'ondëk Hwëch'in First Nation and HSP Nickel project in the traditional territory of the First Nation of Ekuanitshit. Monster Cu-Co-Ag-Au claim, Yukon:
Reconnaissance RC drilling confirms increasing copper and alteration intensity near Bloom target, Class 3 permit application submitted for expanded diamond drill program, Artificial Intelligence targeting study in progress with Windfall Geotek. HSP Ni-Cu-PGE claim, Quebec: 3km long area prospective for Ni-PGE mineralization on HSP discovered, Drill targeting in progress using the recent 55 km2 TDEM survey, Fully funded for 2021 exploration program. Final drill results of hole MO20-01, 02 and 03 have been delivered from the lab. Hole MO20-01 targeted the main Bouger gravity anomaly on the Bloom target. Equipment issues caused the hole to be limited to 100m in depth. The hole encountered a large clast of mud-sandstone until the end of the hole. Barium concentrations in the hole are indicative of barite which is an important IOCG indicator mineral. The barium content increased towards the end of the hole. The gravity target itself was not intersected and is expected to be at a depth of 150m. お知らせ • Nov 25
Go Metals Corp. announced that it has received CAD 0.65 million in funding Go Metals Corp. (CNSX:GOCO) announced a non-brokered private placement 1,176,471 national flow-through shares at a price of CAD 0.085 per national flow-through share for the gross proceeds of CAD 100,000.035 and 6,111,111 quebec flow-through shares at a price of CAD 0.09 per share for the gross proceeds of CAD 549,999.99, for an aggregate gross proceeds of CAD 650,000.025 on November 23, 2020. The company has paid CAD 37,000 as finders fees in the transaction. All securities issued in the transaction are subject to a statutory hold period of four months and one day from the date of issuance. お知らせ • Aug 14
Go Metals Corp. announced that it expects to receive CAD 0.75675 million in funding from Palisades Goldcorp Ltd. Go Metals Corp. announced a non- brokered private placement of 15,135,000 units at a price of CAD 0.05 per Unit for gross aggregate proceeds of CAD 756,750 led by Palisades Goldcorp Ltd. on August 13, 2020. Each unit is comprised of one common share and one transferable share purchase warrant. Each warrant entitles the holder thereof to purchase one additional share of the company at a price of CAD 0.07 for a period of 36 months from the date of issuance. The company paid a finder's fees of CAD 14,122.50 cash and 282,450 finder's warrants. Each finder's warrant is exercisable at a price of CAD 0.07 for a period of 36 months on the same terms of the warrants noted above. All securities issued in connection with the private placement are subject to a statutory hold period of four months and one day from the date of issuance. お知らせ • Jun 20
Flow Metals Corp. entered into an arrangement agreement to acquire 4,103.1 Hectare New Brenda Property at British Columbia, Canada from Go Metals Corp. (CNSX:GOCO). Flow Metals Corp. entered into an arrangement agreement to acquire 4,103.1 Hectare New Brenda Property at British Columbia, Canada from Go Metals Corp. (CNSX:GOCO) on July 16, 2018. Pursuant to the terms, Flow Metals will issue 9,767,233 common shares to Go Metals based on one Flow Metals share being issued for every six issued and outstanding common shares of Go Metals. Outstanding warrants and stock options to purchase Go Metals shares will be exercisable to acquire Flow Metals shares as well as Go Metals' shares on the basis that the holder will receive, upon exercise, one Flow Metals share for every six shares of Go Metals acquired. The transaction is also subject to a one and one-half percent (1.5%) net smelter return royalty on a portion of the New Brenda Property. On September 10, 2018, the B.C. Supreme Court approved the Arrangement effective for September 17, 2018. 
