Annuncio • May 22

Dpm Metals Reports New High-Grade Intercepts from the Chelopech Wedge Zone Deep Prospect; Expects Mineral Resource Estimate by Year-End 2026

DPM Metals Inc. reported results from delineation drilling at the Wedge Zone Deep ("WZD") prospect, located within the Chelopech mine concession and 250 metres below existing mine infrastructure. · Results confirm and extend high-grade mineralization: The mineralized zone has now been defined over approximately 170 metres along strike, 130 metres in width, and 300 metres in vertical extent, with drilled gold grades well in excess of the existing Chelopech mine gold Reserve grade of 2.18 g/t.1 · Open in multiple directions: The WZD target remains open along strike and down-dip. · Initial mineral resource estimate targeted by year-end 2026: The Company is planning further drilling over the balance of 2026, with an initial mineral resource expected by year-end as part of the Chelopech Wedge Zone Deep Drilling Program Results Delineation drilling at the WZD prospect continued through late 2025 and the first quarter of 2026, following up on high-grade intercepts previously reported on November 19, 2025. The aim of this drill program was to extend the limits of the WZD prospect, which was open in several directions, and to improve DPM's understanding of the geometry and extent of mineralization in support of an initial mineral resource estimate and an evaluation of WZD's potential to augment the existing life of mine plan at Chelopech. The WZD prospect is located on the northern flank of the Chelopech mine concession and, based on the latest drilling, is situated approximately 250 metres below existing Mineral Reserves and current underground infrastructure. The target area comprises a broad corridor of prospective ground that lies below -100 metres elevation and is located on the hanging wall of the Petrovden Fault, which traverses the mine concession in an approximate east-west orientation. To date, approximately 11,800 metres have been completed in 17 drillholes within the WZD area, with two additional holes currently underway. The results continue to support the geological interpretation of the zone as a continuous body of high-sulphidation-type gold-copper-silver mineralization associated with advanced argillic alteration and hosted within diorite and phreato-magmatic breccias proximal to the Petrovden Fault. Mineralization encountered in the new drillholes is consistent with that observed in the initial discovery holes and occurs as wide, continuous zones of massive sulphides that gradually transition down-dip into hydrothermal breccias and sulphide stockworks containing disseminated and mottled pyrite and copper sulphosalts. A key result from the program was drillhole EX_WZD_165_03, which intersected a wide zone of massive sulphides and extended mineralization 100 metres up-dip toward existing infrastructure and the Petrovden Fault. Drillholes EX_WZD_165_05A and EX_WZD_210_04 further extended the mineralization down-dip to the south and southeast by 80 metres and 50 metres, respectively, while also confirming the higher grades previously reported in EX_WZD_210_01A. Elsewhere, drillhole EX_WZD_165_05 confirmed the continuity of mineralization between previously reported drillholes EX_WZD_210_01 and EX_WZD_165_01. At higher elevations, EX_WZD_210_05 and EX_WZD_165_04 returned relatively narrower intervals of mineralization, indicating that the alteration envelope pinches out and weakens toward the Petrovden Fault. West of the target, drillholes EX_WZD_210_02 and EX_WZD_210_03 intersected advanced argillic alteration but failed to return significant sulphide mineralization. The mineralized zone is currently defined over approximately 170 metres along strike, 130 metres in width, and 300 metres in vertical extent, and forms a steeply dipping body elongated parallel to the hanging wall of the Petrovden Fault. The target remains open along strike and down-dip, with strong potential for further expansion through additional drilling. Initial metallurgical testwork on material from WZD indicates that the mineralization is amenable to flotation processing and would produce both a gold-copper concentrate and a pyrite concentrate using the existing flowsheet at the Chelopech plant, supporting WZD's potential to augment the existing Chelopech mine plan. These conclusions are based on preliminary laboratory-scale testwork conducted at the Chelopech testwork facility. Next Steps Drilling at the WZD prospect is proceeding as planned and remains focused on expanding the mineralized footprint while refining the geometry and continuity of the system. DPM will continue to explore the broader Wedge Zone Deep corridor for additional mineralization, informed by the possibility of telescoping within the Chelopech hydrothermal system, whereby alteration and mineralization assemblages typically developed at higher structural levels may occur at greater depth than would normally be expected. Exploration will also test analogous structural settings along the Petrovden Fault. The Company is planning further drilling over the balance of 2026, with an initial mineral resource estimate expected by year-end as part of the Chelopech annual Mineral Resource and Mineral Reserve update. As part of ongoing exploration programs, the Company continues to test different targets within the Chelopech mine concession and Brevene exploration licence, with 15 drill rigs currently in operation. To support potential future engineering and investment decisions at the WZD prospect, the Company has initiated a series of technical studies, including an initial geotechnical assessment to inform conceptual mining approaches, an assessment of decline development strategies, and further metallurgical testwork to better evaluate metallurgical characteristics. Sampling, Analysis and QAQC of Exploration Drill Core Samples Most underground exploration diamond drill holes are collared with HQ size, continued and finished with NQ. N-BTK sized core is recovered over navigational drilling intervals. Triple tube core barrels and short runs are used whenever possible to improve recovery. All drill core is cut lengthwise into two halves using a diamond saw; one half is sampled for assaying, and the other half is retained in core trays. The common length for sample intervals within mineralized zones is one metre. Weights of drill core samples range from three to eight kilograms, depending on the size of core, rock type, and recovery. A numbered tag is placed into each sample bag, and the samples are grouped into batches for laboratory submissions. Drill core samples are shipped to the Company's own exploration laboratory in Bor, Serbia, which is managed by SGS Minerals ("SGS"). Quality control samples, comprising certified reference materials, blanks, and field duplicates, are inserted into each batch of samples and locations for crushed duplicates and pulp replicates are specified.

Metals and Mining Crescita del settore	29.18%
Tasso di crescita dei ricavi	13.24%
Rendimento del capitale proprio	22.58%
Margine netto	50.26%
Ultimo aggiornamento sugli utili	30 Jun 2026

Data	Ricavi	Utili	Spese G+A
30 Jun 26	1,292	649	170
31 Mar 26	1,117	502	161
31 Dec 25	950	369	151
30 Sep 25	777	299	120
30 Jun 25	657	249	112
31 Mar 25	627	237	111
31 Dec 24	607	243	109
30 Sep 24	567	209	108
30 Jun 24	542	199	99
31 Mar 24	518	178	94
31 Dec 23	520	182	88
30 Sep 23	397	244	84
30 Jun 23	404	150	73
31 Mar 23	406	133	68
31 Dec 22	433	117	59
30 Sep 22	583	55	48
30 Jun 22	617	163	49
31 Mar 22	657	197	45
31 Dec 21	641	191	41
30 Sep 21	627	189	48
30 Jun 21	621	194	49
31 Mar 21	600	175	57
31 Dec 20	610	200	54
30 Sep 20	583	63	47
30 Jun 20	522	14	44
31 Mar 20	467	-17	35
31 Dec 19	404	-65	45
30 Sep 19	362	20	49
30 Jun 19	372	34	49
31 Mar 19	376	34	49
31 Dec 18	377	38	44
30 Sep 18	389	38	40
30 Jun 18	377	21	38
31 Mar 18	361	15	36
31 Dec 17	349	0	33
30 Sep 17	336	-106	27
30 Jun 17	298	-139	25
31 Mar 17	284	-159	26
31 Dec 16	279	-150	24
30 Sep 16	251	-43	23
30 Jun 16	249	-10	23
31 Mar 16	235	1	22
31 Dec 15	225	3	22
30 Sep 15	261	25	23

Dati	Ultimo aggiornamento (ora UTC)
Analisi dell'azienda	2026/09/17 06:52
Prezzo dell'azione a fine giornata	2026/09/17 00:00
Utili	2026/06/30
Utili annuali	2025/12/31

Pacchetto	Dati	Tempistica	Esempio Fonte USA ^*
Dati finanziari della società	10 anni	Conto economico Rendiconto finanziario Bilancio	Modulo SEC 10-K Modulo SEC 10-Q
Stime di consenso degli analisti	+3 anni	Previsioni finanziarie Obiettivi di prezzo degli analisti	Rapporti di ricerca degli analisti Blue Matrix
Prezzi di mercato	30 anni	Prezzi delle azioni Dividendi, scissioni e azioni	Dati di mercato ICE Modulo SEC S-1
Proprietà	10 anni	Top azionisti Insider trading	Modulo 4 SEC Modulo 13D SEC
Gestione	10 anni	Team di leadership Consiglio di amministrazione	Modulo SEC 10-K Modulo SEC DEF 14A
Sviluppi principali	10 anni	Annunci aziendali	Modulo 8-K SEC

Analista	Istituzione
Michael Kozak	ATB Cormark Historical (Cormark Securities)
Bereket Berhe	Beacon Securities Limited
Raj Ray	BMO Capital Markets Equity Research

DPM Metals Performance degli utili passati

Criteri Il passato verificati 6/6

Informazioni chiave

Aggiornamenti sulle prestazioni recenti

DPM Metals Inc. to Report Q2, 2026 Results on Jul 30, 2026

DPM Metals Inc. to Report Q1, 2026 Results on May 05, 2026

DPM Metals Inc. to Report Q4, 2025 Results on Feb 10, 2026

DPM Metals Inc. to Report Q3, 2025 Results on Nov 13, 2025

Recent updates

DPM Metals Extends Mineralization At Dumitru Potok With High-Grade Intercepts

DPM Metals Inc. Declares Third Quarter Dividend, Payable on October 15, 2026

DPM Metals Inc. to Report Q2, 2026 Results on Jul 30, 2026

Dundee Corporation (TSX:DC.A) completed the acquisition of remaining 21.9% stake in Dundee Sustainable Technologies Inc. (CNSX:DST) from DPM Metals Inc. (TSX:DPM), Innovation Technologique Lalancette Inc and others.

Dpm Metals Announces Discovery of High-Grade Gold-Copper Porphyry Mineralization At Brevene South Porphyry Target

Dpm Metals Reports New High-Grade Intercepts from the Chelopech Wedge Zone Deep Prospect; Expects Mineral Resource Estimate by Year-End 2026

Dpm Metals Inc. Declares a Second Quarter Dividend, Payable on July 15, 2026

DPM Metals Inc. to Report Q1, 2026 Results on May 05, 2026

DPM Metals Inc., Annual General Meeting, May 06, 2026

DPM Metals Inc. Revised Production Guidance for the Full Year 2026 and 2027 and Provides Production Guidance for the Full Year 2028

DPM Metals Inc. Announces an Update to the Mineral Resource and Mineral Reserve Estimate and Life of Mine Plan for its Chelopech Mine in Bulgaria

DPM Metals Inc. to Report Q4, 2025 Results on Feb 10, 2026

DPM Metals Inc. Announces Inferred Mineral Resource Estimates of 2.6 Million Gold Ounces and 1.9 Billion Pounds of Copper At the Rakita Camp

DPM Metals Inc. Announces Results from Ongoing Exploration Drilling at the Wedge Zone Deep

DPM Metals Inc. Declares Fourth Quarter Dividend, Payable on January 15, 2026

DPM Metals Inc. to Report Q3, 2025 Results on Nov 13, 2025

DPM Metals Inc. Responds to Revocation of the Loma Larga Environmental Licence

Ripartizione dei ricavi e delle spese

Storico di utili e ricavi

Flusso di cassa libero e analisi degli utili

Analisi della crescita degli utili nel passato

Rendimento del capitale proprio

Rendimento delle attività

Rendimento del capitale investito

Scoprire le aziende con forti performance passate

Analisi aziendale e situazione dei dati finanziari

Fonti dei dati

Modello di analisi e Snowflake

Metriche di settore e industriali

Fonti analitiche