New Risk • Mar 20
New minor risk - Market cap size The company's market capitalization is less than US$100m. Market cap: CA$134.1m (US$97.7m) This is considered a minor risk. Companies with a small market capitalization are most likely businesses that have not yet released a product to market or are simply a very small company without a wide reach. Either way, risk is elevated with these companies because there is a chance the product may not come to fruition or the company's addressable market or demand may not be as large as expected. In addition, if the company's size is the main factor, it is less likely to have many investors and analysts following it and scrutinizing its performance and outlook. Currently, the following risks have been identified for the company: Major Risk Revenue is less than US$1m. Minor Risks Shareholders have been diluted in the past year (25% increase in shares outstanding). Market cap is less than US$100m (CA$134.1m market cap, or US$97.7m). Annuncio • Feb 27
C3 Metals Inc. Announces Drill Results At Its 100%-Owned Khaleesi Copper Project in Southern Peru C3 Metals Inc. announced drill results at its 100%-owned Khaleesi copper project in southern Peru. The Company has completed 12 diamond drill holes for 6,300 metres ("m"). Step outs are up to 300m. Khaleesi is a greenfield copper project undergoing drill testing for the first time in the project's history. Assay results from the first two holes were previously reported. Assays have now been received from an additional four holes. KHZ5950-001 was collared 150m north of KHZ5800-001. showing a large irregular shaped magnetic anomaly that is coincident with a zone of outcropping skarn. Downhole assay results are shown along trace of drillhole for copper and molybdenum. Yellow drill traces indicate completed or in-progress drill holes with assays pending, and green drill traces indicated the locations of planned drill holes. Results from the first six holes assayed and visual observations for the remaining six holes demonstrate potential for higher grade mineralization in the western and southwestern project area. Mineralization in the east and northeast project area appears to be more distal from the 'heat engine' of the system. With more drilling, the company will be able to define the geometry of the system and vector into the higher-grade zones. The company plan to drill an additional 15,000m in 2026 beyond the first 6,300m completed, for a total 21,300m drilled at Khaleesi by the end of this year. Since it is unclear what metals will be the principal products and as Khaleesi is an early-stage greenfield project with no metallurgical test work completed, assuming different recoveries is premature at this stage. As such an 80% recovery rate is justified. The Company is planning up to 15,000m of drilling comprising 25 to 30 holes in 2026. The drill program will focus on testing: The strike and depth potential of the mineralized garnet and magnetite skarn;. The source of the intense quartz veining observed in KHZ5800-002, which intersected 51.1m at 0.54% copper, 0.31 g/t gold, 3.21 g/t silver, and 6 pp molybdenum (0.86% CuEq), including 18.0m at 1.08% copper, 0.76 g/t gold, 7.62 g/t silver and 7 ppm molybdenum (1.85% CuEq); and. Further skarn and porphyry potential below the glacial till and along the prosperous limestone-diorite contact. Results indicate real potential for a large-scale skarn system with alteration-mineralization vectors suggesting a potential causative porphyry system. The Company is continually updating its geological model and identifying vectors to better target the skarn and potential porphyry system. With the initial Phase 1 drilling program of 6,300m now completed, and the potential for a mineral system confirmed, the Company has initiated an aggressive drill strategy in 2026. For additional information, contact: Dan Symons. The formula is: CuEq % = Cu % + (0.907 x Au g/t) + (0.0107 x Ag g/t) + (0.00051 x Mo ppm). Since it is unclear what metals'll be the principal products and asKhaleesi is an early- stage greenfield project with no met allurgical test work completed, assuming various recoveries is premature at this stages. As such an 80% Recovery rate is justified. As such an 80% recoveries is justified. New Risk • Feb 12
New major risk - Shareholder dilution The company's shareholders have been substantially diluted in the past year. Increase in shares outstanding: 63% This is considered a major risk. Shareholder dilution occurs when there is an increase in the number of shares on issue that is not proportionally distributed between all shareholders. Often due to the company raising equity capital or some options being converted into stock. All else being equal, if there are more shares outstanding then each existing share will be entitled to a lower proportion of the company's total earnings, thus reducing earnings per share (EPS). While dilution might not always result in lower EPS (like if the company is using the capital to fund an EPS accretive acquisition) in a lot cases it does, along with lower dividends per share and less voting power at shareholder meetings. Currently, the following risks have been identified for the company: Major Risks Shareholders have been substantially diluted in the past year (63% increase in shares outstanding). Revenue is less than US$1m. Annuncio • Feb 12
C3 Metals Inc. announced that it has received CAD 28.0005 million in funding On February 11, 2026, C3 Metals Inc. close the transaction. The company announced that it has closed its bought deal private placement of 25,455,000 common shares in the capital of the Company (the “Shares”) at a price of CAD 1.10 per Share for gross proceeds of CAD 28,000,500. As consideration for the services provided by the Underwriters in connection with the Offering, the Company paid the Underwriters a fee of CAD 1,680,030, equal to 6% of the proceeds of the Offering. All securities issued in connection with the Offering are subject to a statutory hold period ending June 12, 2026. The Offering is subject to the final acceptance of the TSX Venture Exchange. Price Target Changed • Feb 09
Price target increased by 13% to CA$2.93 Up from CA$2.60, the current price target is an average from 2 analysts. New target price is 120% above last closing price of CA$1.33. Stock is up 336% over the past year. The company posted a net loss per share of CA$0.034 last year. Annuncio • Jan 22
C3 Metals Inc. announced that it expects to receive CAD 20.0002 million in funding C3 Metals Inc. announced that it has entered into an agreement with Paradigm Capital Inc., as lead underwriter and on behalf of a syndicate of underwriters, pursuant to which the underwriters have agreed to purchase, on a bought deal private placement basis, 18,182,000 common shares of the company at a price of CAD 1.10 per share for gross proceeds to the company of CAD 20,000,200 on January 21, 2026. The offering is being made by way of private placement in the provinces of Canada. The shares may also be offered in the United States pursuant to exemptions from the registration requirements of the United States Securities Act of 1933, as amended, and in such other jurisdictions as may be mutually agreed upon by the underwriters and the company. The securities issued under the offering will be subject to a hold period expiring four months and one day after the closing date of the offering. The offering is expected to close on or about February 11, 2026, and is subject to certain closing conditions, including, but not limited to, the receipt of all necessary regulatory and other approvals including the approval of the TSX Venture Exchange. A cash commission equal to 6.0 per cent on the gross proceeds of the offering shall be paid to the underwriters, subject to the policies of the TSX Venture Exchange and applicable securities laws. New Risk • Jan 21
New minor risk - Share price stability The company's share price has been volatile over the past 3 months. It is more volatile than 75% of Canadian stocks, typically moving 15% a week. This is considered a minor risk. Share price volatility indicates the stock is highly sensitive to market conditions or economic conditions rather than being sensitive to its own business performance, which may also be inconsistent. It also increases the risk of potential losses in the short term as the stock tends to have larger drops in price more frequently than other stocks. Currently, the following risks have been identified for the company: Major Risk Revenue is less than US$1m. Minor Risks Share price has been volatile over the past 3 months (15% average weekly change). Shareholders have been diluted in the past year (30% increase in shares outstanding). Market cap is less than US$100m (CA$121.9m market cap, or US$88.2m). Annuncio • Jan 21
C3 Metals Inc. Announces Results on the Second Drill Hole At its 100%-Owned Khaleesi Copper Project in Southern Peru C3 Metals Inc. announced results on the second drill hole at its 100%-owned Khaleesi copper project in southern Peru. The hole intersected 51.1m at 0.54% copper, 0.31 g/t gold, 3.21 g/t silver and 6 ppm molybdenum (0.86% CuEq) from 339.6m downhole depth (approximately 250m vertical depth). Within that interval is 18.0m at 1.08% copper, 0.76 g/t gold, 7.62 g/t silver and 7 ppm molybdenum. The second drill hole at Khaleesi, KHZ5800-002, was collared along the marble-diorite contact and targeted the southwest extension of the copper mineralization intersected in KHZ5800-001 that intersected multiple zones of mineralization including 269.0m at 0.30% copper, including 60.4m at 0.41% copper. Collectively, the first two drill holes at Khaleesi suggest telescoping and multiple. copper-mineralizing events in the broader hydrothermal system. Khaleesi Drill Hole Highlights. The vein-hosted, copper-gold mineralization remains open along strike and at depth. The Company is planning multiple scout holes under an area of thin glacial till cover to test the sheeted vein zone and to probe deeper into the source of the intense quartz veining seen in Khaleesi. To date, approximately 4,200m of the maiden planned 6,300m program have been completed. The Company is utilizing oriented core at its Khaleesi drill program. Bornite contours are also being modeled based on visual observations in drill core with the goal of continuing to vector in on the high-temperature core of the hydrothermal system. Price Target Changed • Jan 18
Price target increased by 13% to CA$2.93 Up from CA$2.60, the current price target is an average from 2 analysts. New target price is 132% above last closing price of CA$1.26. Stock is up 342% over the past year. The company posted a net loss per share of CA$0.034 last year. Annuncio • Jan 14
C3 Metals Inc. Restarts Full Exploration Activities in Jamaica Following Community Assistance Programs After Hurricane Melissa C3 Metals Inc. announced that project infrastructure has been restored following Hurricane Melissa making landfall over Jamaica on October 28, 2025, and full exploration activities have recommenced. Super Block Project. At the Company's 50%-owned Super Block project the phase one scout drilling program comprising a 14-hole 2,500m program is approximately 50% complete. To date, seven of the 14 holes of the program have been completed. Drilling has recommenced. Bellas Gate Project. At its 100%-owned Bellas Gate project, where Freeport-McMoRan Exploration Corporation is currently funding exploration and project related costs as part of a previously announced earn-in agreement, the Company has resumed exploration drilling with its Company-owned, man-portable drill rig. The Company has also resumed a 70 sq. km 3DIP geophysical survey of which approximately 46 sq. km has been completed to date. Community Assistance Programs. Concurrent with restoring project infrastructure, the Company embarked on a much-needed community assistance program following the devastation brought by Hurricane Melissa. The Company's community assistance program included: The delivery of food, water and basic necessity care packages;. Road repairs and clearing to reconnect communities; and. Providing roofing and housing materials to rebuild damaged homes and community buildings. In total, C3 Metals assisted approximately 500 families across three communities concurrent with restoring project infrastructure necessary to restart exploration activities. Annuncio • Dec 29
C3 Metals Inc., Annual General Meeting, Feb 27, 2026 C3 Metals Inc., Annual General Meeting, Feb 27, 2026. Annuncio • Jun 05
C3 Metals Inc. Commences Drill Testing Multiple Epithermal Gold Targets at Super Block Project, Jamaica C3 Metals Inc. announced it has commenced an initial 14 diamond drill hole, 2,500m program on its 50%-owned Super Block Project, a joint venture with Geophysx Jamaica Limited. The program is designed to test multiple epithermal gold targets over a 5km strike extent, where a strong gold geochemical anomaly coincides with radiometric (pot potassium) highs. Drilling will test multiple prospects including the past producing Pennants Gold Mine and the PEZ and DHZ prospects along trend. Super Block Project Highlights: Past producing Pennants Gold Mine: Operated as an open pit between 2002 and 2004 with estimated production of approximately 16,000 gold ounces. Non-compliant NI 43-101 historical mineral resource of 75,500 tonnes at 20.4 g/t gold1,2. Historical high-grade drill intersections3 from the mine property (drill results are historical in nature and have not been independently confirmed): 1.7m at 430.0 g/t gold; 3.8m at 56.4 g/t gold; 4.6m at 25.6 g/t gold; 9.2m at 18.4 g/t gold); and 3.1m at 17.0 g/t gold. Best soil line results are 60m averaging 0.41 g/t gold and 103m averaging 0.20g/t gold with samples collected at 5m intervals. Rock chip samples assayed up to 1.1 g/t gold at surface. DHZ Prospect: Rock and soil sampling defined a coherent northwest trending gold anomaly measuring 550m by up to 190m wide. Historical drilling within the Super Block focused on the former producing Pennants Gold Mine. Approximately 94 drill holes were completed at Pennants with an average hole depth of only 82 metres. Based on historical drill data and newly collected soil geochemical data, the Company believes the gold system remains open in multiple directions and at depth. Other than a few auger holes (average depth 1metre), no drilling has been reported at PEZ and DHZ prospects. Surface mapping and sampling at the Super Block Project has demonstrated gold mineralization continues for over a +5km strike extent, extending from DHZ through the former Pennants Mine and through PEZ. The Company interprets this large gold anomaly as potentially hosting multiple low to intermediate sulfidation systems. with radiometric anomalies. Map shows the Super Block soil line locations at Pennants Mine and the DHZ and PEZ prospects. The Company is in a financial position to expand the program beyond the initial 14-hole, 2,500m program should results warrant. C3 Metals anticipates assay results from the initial 14-hole program will be announced during third quarter 2025. New Risk • May 10
New major risk - Shareholder dilution The company's shareholders have been substantially diluted in the past year. Increase in shares outstanding: 61% This is considered a major risk. Shareholder dilution occurs when there is an increase in the number of shares on issue that is not proportionally distributed between all shareholders. Often due to the company raising equity capital or some options being converted into stock. All else being equal, if there are more shares outstanding then each existing share will be entitled to a lower proportion of the company's total earnings, thus reducing earnings per share (EPS). While dilution might not always result in lower EPS (like if the company is using the capital to fund an EPS accretive acquisition) in a lot cases it does, along with lower dividends per share and less voting power at shareholder meetings. Currently, the following risks have been identified for the company: Major Risks Shareholders have been substantially diluted in the past year (61% increase in shares outstanding). Revenue is less than US$1m. Minor Risks Share price has been volatile over the past 3 months (17% average weekly change). Market cap is less than US$100m (CA$65.9m market cap, or US$47.3m). Annuncio • Mar 20
C3 Metals Inc. announced that it has received CAD 11.5 million in funding On March 19, 2025 C3 Metals Inc. closed the transaction and issued 23,000,000 common shares at issue price of CAD 0.50 for gross proceeds of CAD 11,500,000, which includes the exercise of the over-allotment option. As consideration for the services provided by the Underwriters in connection with the Offering, the Company paid the Underwriters a fee of CAD 690,000, equal to 6% of the proceeds of the Offering .All securities issued in connection with the Offering are subject to a statutory hold period ending July 20, 2025. The Offering is subject to the final acceptance of the TSX Venture Exchange. Annuncio • Feb 28
C3 Metals Inc. announced that it expects to receive CAD 10 million in funding C3 Metals Inc. announced that it has entered into an agreement with Paradigm Capital Inc., as co-lead underwriter with Canaccord Genuity Group Inc. and on behalf of a syndicate of underwriters pursuant to which the Underwriters have agreed to purchase, on a bought deal private placement basis, 20,000,000 common shares at a price of CAD 0.50 per Share for gross proceeds to the Company of CAD 10,000,000 on February 27. 2025. The securities issued under the Offering will be subject to a hold period expiring four months and one day after the closing date of the Offering. The Offering is expected to close on or about March 19, 2025 and is subject to certain closing conditions including, but not limited to, the receipt of all necessary regulatory and other approvals including the approval of the TSX Venture Exchange. New Risk • Feb 18
New minor risk - Share price stability The company's share price has been volatile over the past 3 months. It is more volatile than 75% of Canadian stocks, typically moving 13% a week. This is considered a minor risk. Share price volatility indicates the stock is highly sensitive to market conditions or economic conditions rather than being sensitive to its own business performance, which may also be inconsistent. It also increases the risk of potential losses in the short term as the stock tends to have larger drops in price more frequently than other stocks. Currently, the following risks have been identified for the company: Major Risks Less than 1 year of cash runway based on free cash flow trend (-CA$7.4m free cash flow). Revenue is less than US$1m. Minor Risks Share price has been volatile over the past 3 months (13% average weekly change). Shareholders have been diluted in the past year (24% increase in shares outstanding). Market cap is less than US$100m (CA$36.9m market cap, or US$26.0m). New Risk • Jan 26
New major risk - Financial position The company has less than a year of cash runway based on its current free cash flow trend. Free cash flow: -CA$7.4m This is considered a major risk. With less than a year's worth of cash, the company will need to raise capital or take on debt unless its cash flows improve. This would dilute existing shareholders or increase balance sheet risk. Currently, the following risks have been identified for the company: Major Risks Less than 1 year of cash runway based on free cash flow trend (-CA$7.4m free cash flow). Revenue is less than US$1m. Minor Risks Shareholders have been diluted in the past year (24% increase in shares outstanding). Market cap is less than US$100m (CA$21.1m market cap, or US$14.7m). Annuncio • Jan 08
C3 Metals Inc. Further Expands Khaleesi Copper-Gold Mineralization in Peru C3 Metals Inc. announced results from a recently completed surface mapping and rock sampling program at its highly promising Khaleesi copper-gold project in Southern Peru. Ongoing surface mapping and sampling continues to expand the previously identified skarn, porphyry and epithermal vein copper-gold mineralization. The most recent batch of rock chip samples from the Company's mapping and rock sampling program returned up to 1.80% copper, 4.4 g/t gold and 403 ppm molybdenum. Khaleesi represents a rare opportunity to explore an undrilled copper-gold mineralized skarn, epithermal and porphyry prospect on the world-class Andahuaylas-Yauri Porphyry-Skarn belt. The Company has strategically amalgamated a significant mineral concession package of over 30,000 hectares within 45km of the large Las Bambas (MMG) and Constancia (Hudbay Minerals) copper mines. Highlights of Recent Mapping and Sampling Program at Khaleesi. Diorite dykes containing chalcopyrite and chrysocolla, malachite, azurite mineralization. Rock chips assayed up to 0.50% copper, 0.34 g/t gold and 403pp molybdenum. Prograde and retrograde skarn mapped over a 1,200m by 1,000m area. Geochemical and geophysical data collection will be important to understand the potential for a mineralized porphyry system beneath the glacial till, as there is outcropping porphyry-style mineralization and alteration on either side of the till occurrence. Next steps. Following on from the mapping and sampling program, the Company commenced a 50-metre grid soil sampling program over the Khaleesi project area. The Company has contracted Arce Geofisicos to undertake a 45.5-line ground magnetic survey, a 24.5-line kilometre Induced Polarization survey and complete a MT/AMT survey (14 full tensor stations) during the first quarter of 2025. Data from grid-soils and geophysics programs will provide essential surface and subsurface data that will be used to design a maiden drill program. Annuncio • Dec 31
C3 Metals Inc., Annual General Meeting, Feb 28, 2025 C3 Metals Inc., Annual General Meeting, Feb 28, 2025. Annuncio • Oct 22
C3 Metals Inc. Announces Results from Partially Completed Surface Mapping and Sampling on Its Khaleesi Copper-Gold Project in the Prolific Andahuaylas-Yauri Porphyry-Skarn Belt of Southern Peru C3 Metals Inc. announced results from partially completed surface mapping and sampling on its Khaleesi copper-gold project in the prolific Andahuaylas-Yauri Porphyry-Skarn belt of Southern Peru. The Khaleesi project is an outcropping, mineralized, undrilled copper-gold skarn and porphyry prospect. The Company's recent "boots on the ground" surface mapping and sampling program has successfully delineated compelling skarn, porphyry and epithermal vein targets. Rock chip samples returned up to 2.82% copper, 6.0 g/t gold, 57.7 g/t silver and 284 ppm molybdenum. The Las Bambas and Constancia copper mines are located less than 45km away from Khaleesi and within the same district, comprising large-scale porphyry-skarn complexes with similar geology and surface expression to that seen at Khaleesi. Khaleesi sits on a northwest trending porphyry and skarn belt that is located approximately 8km to the west of the Company's Jasperoide project where the Company has identified 13 skarn prospects. The first of these 13 skarns to be systematically drill tested was Montana de Cobre, which yielded a maiden Measured and Indicated Mineral Resource of 51.9 million tonnes at 0.50% total copper and 0.20 g/t gold for 569.1 million pounds of copper and 326,800 ounces of gold. Khaleesi and Jasperoide are located along the prolific Andahuaylas-Yauri Porphyry-Skarn belt of Southern Peru. Jasperoide is located along a magnetite skarn belt that contains multiple skarn bodies, including Montana de Cobre Zone (MCZ) skarn deposit. MCZ is the first of 13 identified magnetite skarns that the Company systematically drill tested, yielding a maiden Measured and Indicated Mineral Resource of 51.9 million tonnes at 0.50% total copper and 0.20 g/t gold for 569.1 million pounds of copper and 326,800 ounces of gold. Mineralization at Khaleesi is in a similar geological setting to the nearby major mining operations at Las Bambas (MMG), Constancia and Pampacancha (Hudbay) and Antapaccay (Glencore). The Ferrobamba Formation is an important host for copper-gold mineralization due to its highly reactive nature to hydrothermal fluids. Recent mapping and sampling at Khaleesi have identified outcropping skarn, epithermal and porphyry style alteration with associated copper-gold mineralization (Figure 3). The Khaleesi skarn is zoned, with a prograde garnet-diopside skarn transitioning to magnetite-rich retrograde skarn. Rock samples collected from mineralized outcrops has yielded up to 2.82% copper, 6.0g/t gold, 57.7 g/t silver and 284ppm molybdenum. Immediately west of the skarn is marbleized limestone of the Ferrobamba Formation, locally cut by sheeted and stockwork quartz veins. Rock chip samples of marble cut by quartz veins assayed low in copper geochemistry but yielded up to 2.55g/t gold, 264ppm arsenic and 19.3ppm molybdenum. The copper-gold-molybdenum geochemical signature in rock chips supports the interpretation of a porphyry system at Khaleesi. Next Steps: The undrilled Khaleesi copper-gold porphyry project hosts outcropping skarn and epithermal mineralization. It is a high priority target due to the size of the footprint and its proximity to major producing mines. With a surface access agreement in place with the Cancahuani Community, the Company plans to complete surface mapping and sampling over the 1,800Ha Khaleesi project area. Currently, mapping and sampling is approximately 50% complete. The Company is also planning to undertake soil sampling, Induced Polarization and ground magnetic geophysical surveys over the main project area. These programs should provide essential data prior to drilling and will run concurrently with drill permitting, which is advancing and considered prescriptive now that a surface access agreement is in place. Annuncio • Oct 10
C3 Metals Inc. announced that it has received CAD 4.5 million in funding On October 9, 2024, C3 Metals Inc. has closed the transaction. The company has issued 14,999,999 common shares at a price of
CAD 0.30 per Common Share for gross proceeds of CAD 4,500,000. All securities issued in connection with the Placement are subject to a hold period until February 10, 2025 and the resale rules of applicable securities legislation. Annuncio • Sep 24
C3 Metals Inc. announced that it expects to receive CAD 4.5 million in funding C3 Metals Inc. announced a non-brokered private placement to issue 15,000,000 common share at issue price of CAD 0.30 per share for gross proceeds of CAD 4,500,000 on September 23, 2024. The anticipated closing date of the Placement is October 9, 2024. Closing of the Placement is subject to receipt of all necessary corporate and regulatory approvals, including the approval of the TSX Venture Exchange. All securities issued in connection with the Placement will be subject to a hold period of four months plus a day from the date of issuance and the resale rules of applicable securities legislation. The Company may pay up to a 6.0% cash commission on the value of Common Shares issued to subscribers to qualified finders in Canada in connection with the Placement. Any finder fees paid would be in accordance with TSXV policies. New Risk • Aug 07
New minor risk - Share price stability The company's share price has been volatile over the past 3 months. It is more volatile than 75% of Canadian stocks, typically moving 12% a week. This is considered a minor risk. Share price volatility indicates the stock is highly sensitive to market conditions or economic conditions rather than being sensitive to its own business performance, which may also be inconsistent. It also increases the risk of potential losses in the short term as the stock tends to have larger drops in price more frequently than other stocks. Currently, the following risks have been identified for the company: Major Risks Less than 1 year of cash runway based on free cash flow trend (-CA$9.3m free cash flow). Earnings have declined by 1.5% per year over the past 5 years. Revenue is less than US$1m. Minor Risks Share price has been volatile over the past 3 months (12% average weekly change). Shareholders have been diluted in the past year (17% increase in shares outstanding). Market cap is less than US$100m (CA$13.9m market cap, or US$10.1m). New Risk • Aug 04
New major risk - Market cap size The company's market capitalization is less than US$10m. Market cap: CA$12.4m (US$8.93m) This is considered a major risk. Companies with a small market capitalization are most likely businesses that have not yet released a product to market or are simply a very small company without a wide reach. Either way, risk is elevated with these companies because there is a chance the product may not come to fruition or the company's addressable market or demand may not be as large as expected. In addition, if the company's size is the main factor, it is less likely to have many investors and analysts following it and scrutinizing its performance and outlook. Currently, the following risks have been identified for the company: Major Risks Less than 1 year of cash runway based on free cash flow trend (-CA$9.3m free cash flow). Earnings have declined by 1.5% per year over the past 5 years. Revenue is less than US$1m. Market cap is less than US$10m (CA$12.4m market cap, or US$8.93m). Minor Risk Shareholders have been diluted in the past year (17% increase in shares outstanding). Annuncio • Jun 06
C3 Metals Inc. Drills 294 Metres at 0.30% Copper and 0.13 g/t Gold (0.39% CuEq1) from Surface at Bellas Gate, Jamaica C3 Metals Inc. announced it has intersected 294.0m at 0.30% copper and 0.13 g/t gold from surface in drill hole CMH8390-001 at its Camel Hill porphyry prospect in its 100%-owned Bellas Gate project. The drill hole terminated in 0.36% copper mineralization at 600.0m. This result is a follow up to drill hole CMH8350-001 that reported 207.8m at 0.43% copper and 0.20 g/t gold (0.57% CuEq1) from 22.0m downhole, including 135.0m at 0.52% copper and 0.27g/t gold (0.71% CuEq1). Drilling in Jamaica is evaluating porphyry and epithermal style mineralization associated with multi- phase intrusive complexes. The objective is to establish a significant volume of near-surface copper- gold mineralization that would encompass a bornite-rich core as is commonly associated with economic porphyries. A large area between Geo Hill and Camel Hill with copper in soil greater than 225ppm and coincident magnetic and IP chargeability geophysical anomalies has yet to be drill tested. C3 Metals has intersected significant near surface copper-gold mineralization in multiple holes completed at the Bellas Gate project. Porphyry mineralization is interpreted as high level and is telescoped by later stage epithermal copper-gold mineralization. Locally bornite has been observed at deeper levels in Camel Hill. The Company is now updating 3D geologic models and planning further drill holes to evaluate both the near surface and deeper levels of the Camel Hill porphyry system. In addition, the Company has completed trenching and channel sampling at its 100%-owned Arthurs Seat project and its 50%-owned Super Block project. C3 Metals looks forward to providing additional assay results as they become available. Annuncio • May 16
C3 Metals Inc. Drills 79 Metres at 0.71% Copper and 0.49 g/t Gold (1.06% CuEq1) at Bellas Gate, Jamaica C3 Metals Inc. announced it has intersected 79.0m at 0.71% copper and 0.49 g/t gold (1.06% CuEq1) from 128m, including 46.0m at 0.95% copper and 0.69 g/t gold (1.,45% CuEq1) at its Connors porphyry prospect in its 100%-owned Bellas Gate project. This most recent result from Connors, along with recent intercepts from Provost and Camel Hill, confirms the potential for high-grade copper-gold mineralization within the porphyry systems at Bellas Gate. Many targets remain to be tested. Systematic exploration aimed at defining economic tonnages of mineralization is continuing. Barrick recently signed an agreement with Geophysx Jamaica Ltd. ("Geophysx") to earn up to 80% in certain mineral concessions that essentially surround C3 Metals' 100% owned 17,855 hectares and its 50% owned 9,870-hectare Super Block. The Super Block project is a recently announced 50-50 joint venture between C3 Metals and Geophysx that includes the past producing Pennants Gold mine. Regionally, C3 Metals has identified 16 porphyry, 40 epithermal and multiple volcanic hosted redbed style copper-gold prospects over a 30km strike extent. It was designed to test below drill hole CON9325-001, which intersected 309.0m at 0.44% copper and 0.33 g/t gold (0.67% CuEq1). Drill hole CON9325-002 intersected 79.0m At 0.71% copper and0.49 g/t gold ("1.06%CuEq1") from 128.0m, including 46.0 m at 0.95% copper & 0.69 g/t Gold (1.45% CuEq1). Due to the copper-gold grade profile at Connors, the newly identified Connors SE prospect becomes a high-ranking, near-surface porphyry target. C3 Metals is conducting field work in the area to determine the best location for a drill pad for the initial test of this new prospect. Next Steps. C3 Metals has completed multiple drill holes at the Camel Hill and Geo Hill porphyry prospects on the Bellas Gate project. Assays are pending. Separately, the Company has begun trenching and channel sampling at its 100%-owned Arthurs Seat project and its 50%-owned Super Block project. C3 Metals looks forward to providing additional assay results as they become available. The Company's drill contractor recently completed the required metreage under its drilling contract. C3 Metals will continue to drill with its more cost-efficient, company-owned, diamond drill rig. For additional information, contact: Dan Symons. ALS is an accredited laboratory which is independent of the Company. Gold assays were by fire assay fusion with AAS finish on a 30g sample and the overlimit gold assay was completed by fire assay and gravimetric finish on 30g sample. Copper and silver were assayed by ICP-AES following a 4-acid digestion on the ME-ICP61 package for a suite of 33 elements and the over limit copper by 4-Acid digestion and assayed by ICP- AES on each sample with copper greater than 1000ppm (1%). Forward looking information involves known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements to be materially different from any future results, performance or achievements expressed or implied by the forward-looking information. Such factors include risks inherent in the exploration and development of mineral deposits, including risks inherent in the exploration and Development of mineral deposits, including risks relating to changes in project parameters as plans continue to be redefined, risks relating to variations in grade or recovery rates, risks relating to changes in mineral prices and the worldwide demand for and supply of minerals. Annuncio • Mar 30
C3 Metals Inc. Provides Update on Its Copper-Gold Exploration Program in Jamaica C3 Metals Inc. provided an update on its copper-gold exploration program in Jamaica and communicate its exploration objectives. The Company is currently systematically evaluating a district-scale property where 16 porphyry, 40 epithermal, and multiple volcanic redbed copper prospects have been identified over 30km of strike extent. Exploration Objectives: C3 Metals is focused on the discovery of at least one million tonnes of contained copper equivalent on its district-scale mineral concession package in Jamaica. Across the Bellas Gate and Arthurs Seat properties surface exploration has delineated approximately 18km of continuous copper in soil geochemistry assaying over 300ppm copper together with over 800 rock chip samples assaying above 0.50% copper. Numerous mineralization styles (porphyry, epithermal, volcanic redbed) are evident across numerous prospects. C3 Metals is systematically testing these prospects as quickly and efficiently as possible to determine the probability of an individual prospect meeting the one million tonnes of contained copper equivalent criteria. Examples of target size/grade criteria include: 200Mt at 0.5% CuEq (open pit target); 100Mt at 1.0% CuEq (open pit or underground target); 50Mt at 2.0% CuEq (open pit or underground target). The Company has confirmed multiple mineralization styles (porphyry, epithermal and volcanic redbed) with exploration targets that potentially meet the tonnage and grade criteria. Systematic exploration will confirm whether each individual prospect meets or fails to meet the defined criteria. Exploration Update: The Company has been drilling with two rigs at its 100% owned Bellas Gate project, primarily at the Provost porphyry prospect. Provost was selected for systematic drilling due to its 1,200m long by up to 1,000m wide copper in soil anomaly coincident with magnetic and IP chargeability geophysical anomalies and three historical drill holes that confirmed porphyry-style copper-gold mineralization below surface. potential at depth to understand the probabilities of Provost meeting C3 Metals' target size/grade criteria. Near-surface, step out drill holes to the northwest have shown the Provost mineralization to be irregular in shape, as porphyry mineralization plunges downdip in the central prospect area. Mineralization remains open along strike to the east, north and at depth. Deeper drill holes were planned to test the grade potential at depth as a follow up to drill hole PVT0825- 001, which intercepted 281m at 0.37% copper and 0.21 g/t gold (0.52% CuEq), including 62m at 0.50% copper and 0.39 g/t gold (0.77% CuEq). Copper and gold grades clearly increased with depth in PVT0825-001, with the ratio of chalcopyrite to pyrite increasing downhole and bornite mineralization observed at approximately 450m vertical depth. To date, a single deeper drill hole (PVT0825-003) has been completed at Provost. PVT0825-003 intersected a cumulative 449m intercept of porphyry copper-gold mineralization associated with sheeted porphyry B-veins and locally quartz stockworks. At approximately 550m downhole, PVT0825-003 encountered a fault zone of heavily silicified and mineralized broken rock making for inefficient drill productivity until the hole was terminated in mineralization at 780m downhole depth. Trace bornite mineralization was observed in hole PVT0825-003, and it is possible that a higher grade bornite rich core to the Provost porphyry prospect is present immediately below or east of this fault zone associated with a large magnetic geophysical anomaly. Next Steps: The Company continues to drill with two rigs at the Bellas Gate project. Two holes at the Geo Hill prospect have been completed and assays are pending. While the Company awaits the assay results from these holes, drilling has commenced testing the northwest extension of the Camel Hill porphyry prospect where drill hole CMH8400-002 reported 108.0m at 0.42% copper and 0.26 g/t gold (0.60% CuEq) from only 6.0m downhole. Drilling has also commenced at the Connors porphyry prospect (Figure 2) to test below drill hole CON9325-001, which intersected 309.0m at 0.44% copper and 0.33 g/t gold (0.67% CuEq). New Risk • Jan 30
New major risk - Financial position The company has less than a year of cash runway based on its current free cash flow trend. Free cash flow: -CA$9.5m This is considered a major risk. With less than a year's worth of cash, the company will need to raise capital or take on debt unless its cash flows improve. This would dilute existing shareholders or increase balance sheet risk. Currently, the following risks have been identified for the company: Major Risks Less than 1 year of cash runway based on free cash flow trend (-CA$9.5m free cash flow). Earnings have declined by 14% per year over the past 5 years. Revenue is less than US$1m. Minor Risks Share price has been volatile over the past 3 months (15% average weekly change). Shareholders have been diluted in the past year (36% increase in shares outstanding). Market cap is less than US$100m (CA$40.8m market cap, or US$30.5m). Annuncio • Jan 10
C3 Metals Inc. Provides Successful 2023 Exploration Program and Plans Up to 20,000m of Drilling in Jamaica C3 Metals Inc. provided an update on 2023 exploration results and strategy for 2024 at the Company's 100% owned copper-gold projects in Jamaica. Exploration work has confirmed 16 porphyry and over 40 epithermal copper-gold prospects along a 30km strike extent. Drill holes completed during 2023 highlight significant porphyry potential that remains open at depth and along strike. The 2023 exploration program focused on a comprehensive remapping campaign over the Bellas Gate and Arthurs Seat mineral concessions in order to advance understanding of the geology, refine the Company's geologic interpretation and develop a first pass 3D regional geology model for use in planning future drill targets. All geologic data has been incorporated into a regional geology model, which is significantly enhancing targeting copper-gold-silver mineralization. The 2023 drilling campaign confirmed a cluster of high level, uneroded porphyry systems and associated fully preserved epithermal base and precious metal veins (low, intermediate, and high sulphidation). Drillhole assays confirm significant potential for a meaningful copper-gold porphyry discovery in this highly prospective, yet significantly underexplored porphyry-epithermal belt. The 2024 Jamaica drill program will largely focus on the Bellas Gate Project where two district scale porphyry copper-gold and epithermal copper-gold-silver vein corridors extend over 10km of strike extent. C3 Metals plans to systematically evaluate these two mineralized corridors and anticipates drilling up to 20,000m on high priority targets in 2024. A cluster of copper-gold mineralized porphyries has been identified associated with a 4km zone of strong porphyry alteration mapped at surface. Drilling will progressively step out along strike to determine the potential for continuous copper-gold mineralization in this highly prospective zone. Work is also planned to further develop other priority copper-gold prospects, which include; COFFEE - Magnetic anomaly and coincident 2.5km by 2.5km copper-in-soil anomaly; PLEASANT HILL - Magnetic & IP anomalies and coincident 700m by 600m copper-in-soil anomaly; COCOA RIDGE - Magnetic anomaly and coincident 900m by 500m copper-in-soil anomaly; STAMFORD HILL - CHARING CROSS EPITHERMAL FIELD - Spanish and British historical adits and shafts exploited multiple high-grade copper-gold-silver epithermal veins up to 10m wide; ARTHURS SEAT- an untested porphyry target. Discrete magnetic anomaly over a high tenor 1200m by 800m copper in soil anomaly. Additionally, Induced Polarisation (IP) geophysics survey work is planned at Bellas Gate and Arthurs Seat in 2024. Completing an IP survey will be a major step to aid in the systematic evaluation of numerous porphyry and epithermal prospects. After a short break for the drill crews during the holiday season, drilling has resumed with two drill rigs. Both rigs are currently drilling at Provost to test the strike and depth extent of this high-priority porphyry target. With a well-funded treasury following the closing of an oversubscribed and upsized private placement on November 15, 2023, two drill rigs turning and up to 20,000m of drilling planned for 2024, C3 Metals expects to provide regular news flow from its exploration program in Jamaica. Board Change • Jan 01
Insufficient new directors There is 1 new director who has joined the board in the last 3 years. The company's board is composed of: 1 new director. 6 experienced directors. No highly experienced directors. President, CEO & Director Dan Symons was the last director to join the board, commencing their role in 2022. The company’s insufficient board refreshment is considered a risk according to the Simply Wall St Risk Model. Annuncio • Dec 30
C3 Metals Inc., Annual General Meeting, Mar 01, 2024 C3 Metals Inc., Annual General Meeting, Mar 01, 2024. Annuncio • Nov 29
C3 Metals Inc. Reports Assays from Two Additional Holes Drilling At the Provost Porphyry Target on Its Bellas Gate Project in Jamaica C3 Metals Inc. reported assays from two additional holes drilled at the Provost porphyry target on the Company's 100% owned Bellas Gate project in Jamaica. Drill hole PVT0825-001 (596.7m) intersected 280.7m at 0.37% copper and 0.21 g/t gold (0.52% CuEq1) from 227.0m, including 61.7m at 0.50% copper and 0.39 g/t gold (0.77% CuEq1) from 446.0m. To date, approximately 5,200m of an 8,500m drill program have been completed. Assays are pending for multiple holes, and drilling remains ongoing with two rigs. Bornite and hypogene chalcocite mineralization, as well as potassic alteration, were confirmed at approximately 500m depth. The Company believes it is possible that PVT0825-001 "clipped" the top of the bornite core of the porphyry system (Figures 2 and 3). PVT0825-001 was drilled with C3 Metals' man-portable drill rig to a record depth of 596.7m for this rig. The presence of bornite mineralization and potassic alteration corresponded with a spike in grades to 1.14% copper and 1.19 g/t gold (1.98% CuEq1) over a 2.5m interval. Therefore, the Company has planned a follow up drill hole utilizing its larger capacity contract drill rig, which has depth capacity of more than 1,000m. The Company is currently defining the dimension and grade of copper-gold mineralization in an intial 900m by 200m target area that remains open in multiple directions and at depth. Provost Drilling Highlights: Drill hole PVT0825-001 intersected 280.7m at 0.37% copper and 0.21 g/t gold (0.51% CuEq1) from 227.0m, including 61.7m at 0.50% copper and 0.39 g/t gold (0.77% CuEq1) from 446.0m. Full transition from pyrite to chalcopyrite-pyrite to bornite mineralization intersected for the first time at the Bellas Gate project. A 2.5m interval of potassic alteration with associated bornite mineralization assayed 1.14% copper and 1.19 g/t gold (1.98% CuEq1) from 503.0m, which is interpreted as the top of a bornite-rich potassic altered core of the Provost porphyry system. Deeper drilling is planned to test below hole PVT0825-001 for extensions of these highgrades. Copper-gold mineralization successfully extended 150m vertically below earlier drill hole PVT0900-002, which intersected 390.7m at 0.37% copper and 0.19 g/t gold (0.50% CuEq1) from 64.1m (see press release dated September 25, 2023). Drill hole PVT0900-004 intersected 170.1m at 0.31% copper and 0.16 g/t gold (0.42% CuEq1) from 68.1m. The hole terminated in 0.30% copper mineralization within a fault zone at 300m depth. Drill Summary: C3 Metals has identified 16 porphyry and 40 epithermal targets across a 30km strike extent within its contiguous mineral concession package in Jamaica. Most historical drilling, while limited, was conducted in the Bellas Gate project area. This historical drilling was relatively shallow, averaging 225m depth with approximately 40% of holes ending in mineralization. The Company's current drilling objectives are twofold: 1) test the strike extent of near-suface mineralization, and 2) test the high grade potential at depth by locating the bornite-rich potassic altered cores typically found in economic porphyry systems. Drilling at Provost continues to define a well-developed porphyry and epithermal copper-gold system that displays classic porphyry style alteration and mineralization zonation. The Company has successfully intersected porphyry and epithermal style mineralization along 400m of strike length and approximately 550m down dip. Provost remains open in multiple directions and at depth. PVT0825-001 extends the northwest striking mineralized zone an additional 150m down dip and, more importantly, confirms the presence of high-grade, bornite-hosted copper mineralization. The upper levels of PVT0825-001 intersected andesite volcanics with kaolinite alteration overprinting illite-chlorite alteration, interpreted as advanced argillic alteration. Below this upper leached zone, is high-grade porphyry copper-gold mineralization and epithermal style base and precious metal mineralization with locally well-developed porphyry quartz stockwork and sheeted B-veins. Annuncio • Nov 17
C3 Metals Inc. announced that it has received CAD 8.05 million in funding On November 15, 2023, C3 Metals Inc. closed the transaction. The company issued 115,000,000 common share at a issue price of CAD 0.07 per share for the gross proceeds of CAD 8.050,000. In connection with the Offering the Company paid certain eligible finders cash commissions in the aggregate of CAD 42,600 and an advisory fee of CAD 107,100. All securities issued in connection with the Offering are subject to a hold period expiring on March 16, 2024 and the resale rules of applicable securities legislation. The Offering is subject to the final approval of the TSX Venture Exchange. Annuncio • Nov 02
C3 Metals Inc. announced that it expects to receive CAD 7 million in funding C3 Metals Inc. announced a private placement of 100,000,000 common shares at a price of CAD 0.07 per share for the gross proceeds of CAD 7,000,000 on November 1, 2023. The transaction is expected to close on November 15, 2023. Closing of the placement is subject to receipt of all necessary corporate and regulatory approvals, including the approval of the TSX Venture Exchange. All securities issued in connection with the placement will be subject to a hold period of four months plus a day from the date of issuance. Annuncio • Oct 12
C3 Metals Inc. Extends Copper-Gold Porphyry Mineralization 150M At Provost At Bellas Gate, Jamaica; Drill Hole Ended in 1.1M At 1.27% Copper and 4,090 G/T Silver C3 Metals Inc. announced it has received assays for PVT0900-003, the third hole of the 2023 drilling program completed on the Provost porphyry target. The Company is evaluating an extensive zone of near surface porphyry and epithermal base and precious metal mineralization at Provost. Provost is located along a 4km northwest trend at the Company's 100% owned Bellas Gate project in Jamaica. Provost drill hole PVT0900-003 (418.6m), which was terminated 150m short of target depth due to drilling difficulties in a fault zone, intersected 112m at 0.35% copper and 0.13 g/t gold (0.44% CuEq1) from 305.8m with the last 1.1m of the hole ending in high-grade epithermal style mineralization grading 1.27% copper and 4,090 g/t silver. This hole extended known copper-gold mineralization at Provost by 150m to the northwest. PVT0900-003 intersected 112m at 0.35% copper and 0.13 g/t gold (0.44% CuEq1) from 305.8m and terminated in an epithermal vein in the last 1.1m of the hole grading 1.27% copper and 4,090 g/t silver. Porphyry copper-gold mineralized zone extended by 150m along strike from PVT0900-002, which intersected 390.7m at 0.37% copper and 0.19 g/t gold (0.50% CuEq1) from 64.1m, including 279.5m at 0.43% copper and 0.24 g/t gold (0.60% CuEq1). Assays pending for completed drill holes PVT0900-004 (300.2m) and CMH8275-001 (500.4m). Drilling is well advanced on two additional holes. The Company's man-portable rig is currently evaluating near-surface tonnage potential of porphyry and epithermal style base and precious metal mineralization at Provost. The larger contract rig is testing for depth extension to the copper-gold mineralization at Camel Hill. Drilling to date confirms porphyry copper-gold mineralization is overprinted by intermediate and high sulphidation epithermal veins that extend to at least 400m depth. The sub-surface mineralized zone has been expanded a further 150m northwest of PVT0900-002. High-level porphyry copper-gold mineralization is overprinted by epithermal quartz veins with strong chalcopyrite and tetrahedrite mineralization. High-grade epithermal style mineralization was anticipated at Provost, as much of the epithermal and porphyry hydrothermal systems remain intact. It is very positive to confirm this high-grade epithermal potential within the porphyry system at such an early stage in the program. The upper section of PVT0900-003 intersected high-level, low-grade porphyry copper-gold mineralization that is predominantly hosted in intrusive rock types, assaying 103m at 0.18% copper, 0.10g/t gold and 0.89g/t silver from 48.1m downhole. Higher grade diorite-hosted copper-gold porphyry mineralization was intersected downhole, starting from 305.8m. The final 1.1m intersected extremely high-grade silver at 4,090 g/t and high-grade copper at 1.27%. The hole had to be abandoned due to poor ground conditions, and this zone will be further tested from a collar located 400m north of PVT0900 drill pad location. Despite abandoning the hole due to ground conditions, 70-80% core recoveries were achieved, and high-grade epithermal copper and silver mineralization was confirmed. Annuncio • Sep 26
C3 Metals Inc. Receives Assays for the Final 130.7M of Drill Hole PVT0900-002 C3 Metals Inc. announced it has received assays for the final 130.7m of drill hole PVT0900-002. Assays for the first 350.0m were reported on September 12, 2023. Drill hole PVT0900-002 intersected 390.7m at 0.37% copper and 0.19 g/t gold (0.50% CuEq1) from 64.1m, including 279.5m at 0.43% copper and 0.24 g/t gold (0.60% CuEq1). This is the broadest interval of copper-gold mineralization reported to date at the Company's 100% owned Bellas Gate project in Jamaica. Ongoing drilling will continue evaluating a cluster of discrete high priority porphyry copper-gold targets. C3 Metals is drill testing both the strike and depth potential of these porphyry targets with two goals: adding potential near-surface mineralized material tonnage and locating the bornite-rich potassic altered higher-grade core found in most economic porphyry systems. These targets are defined by coincident alteration, geochemistry and geophysics anomalies along the two parallel Camel and Connors porphyry belts at the Bellas Gate project. Approximately 2,500m of a fully funded 8,500m drill program has been completed to date. Drilling Highlights: Longest interval of copper-gold mineralization ever intersected at the Bellas Gate project. 390.7m at 0.37% copper and 0.19 g/t gold (0.50% CuEq1) from 64.1m, including 279.5m at 0.43% copper and 0.24 g/t gold (0.60% CuEq1) intersected in drill hole PVT0900-002. PVT0900-002 terminated in highly altered diorite and andesite cut by pyrite - magnetite ± chalcopyrite ± molybdenite in veins, with an intense anhydrite overprint. Drill holes PVT0900-003 (418.6m) and CMH8350-001 (662.0m) completed - assays pending. Two additional drill holes are well advanced. Multi-phase system - Porphyry style alteration and mineralization is overprinted or telescoped by intermediate and high-sulphidation epithermal copper-gold mineralization. Drilling at the Provost porphyry target confirms a telescoped, almost fully intact, and non-eroded porphyry copper-gold system. This system is interpreted to be spatially associated with a larger porphyry system at depth, as illustrated in cross section. Mineralization comprises chalcopyrite and pyrite in strongly phyllic to potassic altered diorite and andesite volcaniclastics. Pervasive anhydrite alteration is observed at approximately 400m depth, as veins and infill, locally associated with chalcopyrite mineralization. The presence of strong anhydrite alteration and the multi-phase overprinting of epithermal veins telescoped onto an existing porphyry are positive indicators. Drill results continue to support the interpretation of a well-developed and fertile hydrothermal system. C3 Metals will continue to explore for bornite-rich copper mineralization that is commonly central to most porphyry systems. Next Steps: Recent and historical drilling at Provost confirms porphyry and epithermal copper-gold mineralization is open in most directions. C3 Metals owns a man-portable drill rig that is currently stepping out along strike and at depth at Provost. Based on surface geologic mapping, historical and recent drilling results, the Provost porphyry target currently measures 1,500m in length, averages 350m in width, and has a confirmed depth extent of at least 400m. Planned drilling at Provost is designed to systematically test along strike of this coincident geology, geophysics and geochemical anomaly. The larger capacity contract drill rig is currently drilling approximately 3.5km southeast of Provost at the Camel Hill porphyry target. The Camel Hill porphyry target currently measures 1,800m in length and 1,000m in width and is defined by a coincident geology, geophysics and geochemical anomaly. The first hole was planned to a depth of 450m but was extended to 662m due to the presence of strong pyrite, lesser chalcopyrite and favorable porphyry-style alteration below the original target depth (assays pending). A second hole is currently in progress with a target depth of approximately 500m. These holes provide structural, geochemical, alteration and mineralization data to aid in targeting the bornite-rich potassic altered core found in most economic porphyry systems. Four deep holes (700m - 1,000m) are currently planned along the Camel and Connors porphyry belts. The Company looks forward to providing further updates as drilling progresses and anticipates a steady flow of assay results. New Risk • Aug 24
New major risk - Share price stability The company's share price has been highly volatile over the past 3 months. It is more volatile than 90% of Canadian stocks, typically moving 17% a week. This is considered a major risk. Share price volatility increases the risk of potential losses in the short-term as the stock tends to have larger drops in price more frequently than other stocks. It may also indicate the stock is highly sensitive to market conditions or economic conditions rather than being sensitive to its own business performance, which may also be inconsistent. Currently, the following risks have been identified for the company: Major Risks Share price has been highly volatile over the past 3 months (17% average weekly change). Earnings have declined by 25% per year over the past 5 years. Revenue is less than US$1m. Minor Risks Shareholders have been diluted in the past year (17% increase in shares outstanding). Market cap is less than US$100m (CA$27.6m market cap, or US$20.4m). New Risk • Jul 31
New major risk - Financial position The company has less than a year of cash runway based on its current free cash flow trend. Free cash flow: -CA$10m This is considered a major risk. With less than a year's worth of cash, the company will need to raise capital or take on debt unless its cash flows improve. This would dilute existing shareholders or increase balance sheet risk. Currently, the following risks have been identified for the company: Major Risks Less than 1 year of cash runway based on free cash flow trend (-CA$10m free cash flow). Earnings have declined by 25% per year over the past 5 years. Revenue is less than US$1m. Minor Risks Share price has been volatile over the past 3 months (15% average weekly change). Shareholders have been diluted in the past year (17% increase in shares outstanding). Market cap is less than US$100m (CA$31.0m market cap, or US$23.4m). Recent Insider Transactions • Apr 30
Chairman recently bought CA$75k worth of stock On the 25th of April, Antony Manini bought around 2m shares on-market at roughly CA$0.05 per share. This transaction amounted to 15% of their direct individual holding at the time of the trade. This was the largest purchase by an insider in the last 3 months. Antony has been a buyer over the last 12 months, purchasing a net total of CA$165k worth in shares. Annuncio • Jan 26
C3 Metals Confirms Multiple Gold Targets At Main Ridge Project, Jamaica C3 Metals Inc. announced rock chip assay results up to 35.8 g/t gold from a comprehensive mapping and sampling program on the Company's 100% owned Main Ridge project in Jamaica. The 3,000-hectare Main Ridge project is contiguous with and approximately 15 kilometres to the west of C3 Metals' previously announced discovery of an outcropping, large-scale epithermal vein swarm within its 100% owned 6,000-hectare Arthurs Seat project, where drilling is underway. High-grade Main Ridge rock chip samples are similar in style to and less than one kilometre from the past producing Pennants Gold Mine. The Pennants Gold Mine was operated from 2002 to 2004 on a reported non-compliant NI 43-101 historical mineral resource of 75,500 tons at 20.4 g/t gold. The operator reported historical high- grade drill intersections of 1.7m at 430.0 g/t gold and 4.6m at 25.6 g/t gold from the mine property (drill results are historical in nature and have not been independently confirmed). C3 Metals recently expanded its surface mapping and sampling program to cover the entire 6,000- hectare Arthurs Seat concession, the northern area of the Bellas Gate concession and the 3,000-hectare Main Ridge concession. Results from the ongoing program and previous field exploration programs at Main Ridge have identified multiple gold and copper targets with similar mineralization styles to those identified at Arthurs Seat. A total of 941 rock chip and channel samples have been collected to date with 59 rock samples reporting over 0.10% copper (up to 18.5% copper) and 83 samples reporting over 0.10 g/t gold (up to 35.8 g/t gold). The Company received drill permits for Arthurs Seat two months after application and commenced a planned 25-hole, 5,000m diamond drill program during December 2022. Arthurs Seat is a grassroots discovery of an 8.0km by 4.5km copper-gold-silver mineralized footprint that has never been drill tested. Within the southeast portion of this mineralized footprint sits an outcropping epithermal vein swarm mapped and sampled over a 5.0km by 3.0km area. The Company has collected thousands of samples at Arthurs Seat and previously announced rock chip assays up to 58.1 g/t gold, 16.5% copper and 4,890 g/t silver. To date, four of the planned 25 drill holes have been completed. Assays are pending for the first two holes with the third and fourth holes being prepared for shipment to the assay lab. The Company is continuing an aggressive mapping and sampling program along the 20km trend of the CRFZ, from the northern portion of Bellas Gate, through Arthurs Seat to Main Ridge. Surface mapping and sampling will continue over the coming months to define drilling priorities. Annuncio • Dec 31
C3 Metals Inc., Annual General Meeting, Mar 03, 2023 C3 Metals Inc., Annual General Meeting, Mar 03, 2023. Annuncio • Dec 02
C3 Metals Receives Drill Permit for Arthurs Seat Copper-Gold Project in Jamaica C3 Metals Inc. announced that it has obtained approvals to commence exploration drilling at its 100% owned Arthurs Seat Project in Jamaica. Arthurs Seat is a 6,000-hectare area in which C3 Metals has made a grassroots copper-gold-silver discovery with an 8.0 km by 4.5 km copper-gold-silver footprint. Within this larger system, a high-density, low-intermediate sulphidation epithermal vein swarm has been discovered over a 5.0 km by 3.0 km area. Of the 1,775 rock-chip samples assayed to date, 161 rock chip samples have assayed greater than 1% copper and 41 rock chip samples have assayed greater than 1.0 g/t gold at Arthurs Seat. There is no known record of any previous diamond drilling at Arthurs Seat. C3 Metals is also pleased to report new rock chip gold assays up to 58.1 g/t gold, the highest-grade sampled at the project to date. An initial 5,000m drilling program comprising some 25 holes from 11 drill pad locations is planned. The first drill pad is now under construction. The first drill fans will test a quartz-rich structure that is up to 40m wide with surface rock chip samples assaying up to 43.2 g/t gold. Arthurs Seat Exploration Highlights: Drill permit received and a Phase 1 program comprising 25 holes and 5,000 metres will commence imminently; Copper-gold-silver mineralization over an area of 8.0 km by 4.5 km with 161 rock chip assays grading greater than 1% copper (Figure 1); Epithermal quartz vein swarm over 5.0 km by 3.0 km with 41 rock chip samples grading greater than 1.0 g/t gold; Latest batch of rock chip samples assayed up to 58.1 g/t gold, 16.5% copper and 4,890 g/t silver; Visible gold identified in sheeted quartz veins; and Discrete zones of interpreted redbed-style, high-grade copper-silver mineralization discovered in the northwest project area completely separate from the vein hosted gold-copper-silver epithermal style mineralization in the southeast. Annuncio • Nov 29
C3 Metals Intersects 178.5 Metres At 0.37% Copper, 0.16 G/T Gold and 108.0 Metres At 0.42% Copper, 0.26 G/T Gold in Near-Surface Porphyry-Style Mineralization At Bellas Gate, Jamaica C3 Metals In announced it has intersected multiple zones of high-level porphyry and epithermal style copper-gold-silver mineralization at its 100% owned Bellas Gate Project in Jamaica. Two holes were drilled to test a large coincident magnetic and IP chargeability anomaly at the Camel Hill target that is contiguous with the Connors Porphyry target, where the Company recently reported intersecting 309.0m at 0.44% copper and 0.33g/t gold. Both drill holes at Camel Hill intersected copper-gold-silver porphyry mineralization within 10.0 and 6.0 metres from surface, respectively. Intense biotite and magnetite alteration, as well as a large magnetic and chargeability anomaly, suggest significant depth potential. The mineralization tested to date is predominantly hosted by volcanics and is interpreted to be high in the porphyry system. Plus Minerals (Imants Kavalieris and Khashgeral Bat-Erdene), a consulting company with extensive experience evaluating some of the world's largest porphyry copper-gold systems, has completed an ASD spectrometer alteration study on the Camel Hill and Connors drill core. The independent study concluded: Early potassic alteration overprinted by late stage tremolite-actinolite-chlorite-magnetite veins; A and B porphyry style quartz veins associated with gold-rich chalcopyrite-pyrite mineralization; Unusually intense biotite-magnetite alteration in andesitic wall rocks that broadens at depth; Porphyry intrusions at Connors and Camel Hill are inferred to have stalled in andesitic wall rocks and appear to widen at depth; and High-grade intermediate sulfidation Au-Ag-base metal-carbonate veins are potentially an extension of the Stamford Hill vein to the southeast. As the current drill rig does not have the capacity to reach beyond 700 metres depth, the Company is planning a remapping program over the Bellas Gate Project area before continuing to drill test the porphyry systems. C3 Metals intends to continue drill testing the porphyry targets once a larger drill rig issourced and mobilized to site. The current drill rig has now been re-directed to undertake a maiden drilling program at the Arthurs Seat Project where epithermal gold-copper quartz veins that have been mapped over widths to 40m. The Company anticipates drilling at Arthurs Seat will commence before the end of 2022. Annuncio • Nov 08
C3 Metals Inc. Continues Expansion of Gold-Copper System At Arthurs Seat, Jamaica C3 Metals Inc. reported that exploration continues to expand the recently discovered epithermal gold-copper vein swarm and overall copper-gold-silver mineralization at its' 100% owned Arthurs Seat Project in Jamaica. C3 Metals also reports its highest grade rock chip gold assay to date at 29.8 g/t gold in epithermal style mineralization. Epithermal style quartz veining has now been mapped and sampled over a 5.0 km by 3.0 km area, occurring within a much broader 8.0 km by 4.5 km footprint of copper-gold-silver mineralization. Geologists have recently discovered epithermal-style sheeted quartz veins south of the Crawle River- Rio Minho Fault Zone ("CRFZ"). An initial 5,000 m drill program comprised of 25 holes from 10 drill pad locations has been designed to test the vertical and lateral continuity of gold-copper mineralization. A drilling application has been submitted for Arthurs Seat, and C3 Metals intends to commence drilling immediately once permits are received. Arthurs Seat Exploration Highlights: Copper-gold-silver mineralized zone expanded to 8.0 km by 4.5 km, including 113 rock chip assays grading greater than 1% copper. Epithermal quartz vein and breccia zone expanded to 5.0 km by 3.0 km, including 28 rock chip samples grading greater than 1 g/t gold; Latest batch of rock chip samples assayed up to 29.8 g/t gold and 5.7% copper; Epithermal quartz veins confirmed south of the important CRFZ; Multiple, discrete zones of high-grade copper-silver expanded in the northwest project area; Copper-gold mineralization confirmed over 30 km between Bellas Gate - Arthurs Seat - Main Ridge. Geological mapping, supported by spectral interpretation and radiometric survey data, expanded the zone of epithermal gold-copper veining to 5.0km by 3.0km. Assays from epithermal style quartz veins reported up to 29.8 g/t gold, which also contain significant secondary copper species. Multiple, discrete zones of high-grade copper mineralization occur to the northwest of the epithermal gold-copper vein swarm, returning up to 5.66% copper and 14.4 g/t silver in the latest batch of rock chip assays. Annuncio • Nov 02
C3 Metals Inc. Completes 73 Hole Drilling Program at Jasperoide, Peru C3 Metals Inc. announced that the company has intersected 63.9m at 1.19% copper from 58.8m below surface at its Jasperoide project in Peru. The Company has now received assays from the final six drill holes of the Phase 2 drilling program. The Phase 1 and 2 programs successfully defined a cohesive mineralized 650m long skarn body at the Montaña de Cobre Zone that is strongly oxidized from surface to over 250m in depth. Assay results have been received for the 73-hole, 20,070m two-phase drill program at the Montaña de Cobre Zone on the Jasperoide Project . Drilling defined a strongly oxidized copper-gold skarn body that measures up to 600m in north-south dimension by 650m in east-west dimensions. The upper skarn is an intensely leached cap with low to moderate grade copper-gold mineralization. The grade of mineralization increases significantly below the oxidized cap, including bonanza grades such as 20.1m at 5.83% Cu, 0.87 g/t Au from 96.3m in JAS2700-09. Important lithological and structural controls are now being modeled in 3D to define fluid pathways and generate additional skarn and porphyry targets within the drill permitted area. To the northwest of the Montaña de Cobre Zone, the company has located another skarn target, the Cresta Verde Zone on the other side of the Benoni fault, which is known to be an important structural break in this region. The Cresta Verde Zone will be evaluated further, after modeling of the lithology and structure are completed. Next Steps: The company is undertaking sighter metallurgy test work on the different material types within the oxide skarn body at the Montaña de Cobre Zone to evaluate recoveries, acid consumption and characteristics of the copper and gold mineralization. Material types are differentiated based on geochemical, geotechnical, geological and mineralogical characteristics and these tests will provide important information with respect to the metallurgical response, which is an important de-risking milestone for the company. Annuncio • Oct 13
C3 Metals Inc. Expands Epithermal Gold-Copper Vein System by 1.5 Kilometres at Arthurs Seat, Jamaica C3 Metals Inc. reported it has significantly expanded the previously reported Arthurs Seat, Jamaica epithermal gold-copper vein swarm discovery by an additional 1.5 km to the east of the initial discovery. The high-density, low- intermediate sulphidation epithermal veins have now been mapped and sampled across a 4.5 km by 2.0 km area. This expansion increases the copper-gold-silver mineralized footprint at Arthurs Seat to an area of 8.0 km by 4.0 km. A second batch of rock chip samples from the vein swarm assayed up to 14.4 g/t Au, 245 g/t Ag and 11.1% Cu. These results follow previously reported assays up to 14.2 g/t Au, 53 g/t Ag and 5.2% Cu. The swarm of north-south and east-west trending quartz vein and quartz-rich breccias have been mapped proximal to the regionally significant Crawle River-Rio Minho Fault District, along an emerging fertile belt for porphyry copper-gold and epithermal copper-gold-silver deposits. C3 Metals has successfully expanded the footprint of copper-gold-silver mineralization at Arthurs Seat and continues to discover copper-rich structures within the 8.0 km by 4.0 km contiguously mineralized corridor. Assays from the copper-rich zone to the northwest of the epithermal gold-copper vein swarm have returned up to 13.8% Cu and 492 g/t Ag. C3 Metals' ongoing mapping and sampling program has also expanded the significant epithermal quartz vein and breccia system to 4.5 km by 2.0 km. Quartz-rich structures are up to 30m in true width and are comprised of massive quartz veins, quartz breccias and sheeted quartz veins that have been discontinuously traced along strike for over 2.0 km. The quartz veins and quart-rich breccia zones contain variable percentages of pyrite, chalcopyrite, bornite, malachite and azurite. Rock chip samples have returned numerous high-grade results from epithermal veins, including up to 14.4 g/t Au, 245 g/t Ag and 11.1% Cu. An extensive mapping and sampling program is currently underway. Over 1,000 rock chips have been sent to Actlabs for analysis. A drill permit application has been submitted for Arthurs Seat, and C3 Metals intends to immediately drill test the epithermal vein swarm once permits are received. Recent Insider Transactions • Sep 29
President recently bought CA$54k worth of stock On the 20th of September, Daniel Symons bought around 900k shares on-market at roughly CA$0.06 per share. This trade did not impact their existing holding. In the last 3 months, there was an even bigger purchase from another insider worth CA$90k. This was Daniel's only on-market trade for the last 12 months. Annuncio • Sep 14
C3 Metals Inc. Discovers Large-Scale Epithermal Gold-Copper Vein System At Arthurs Seat, Jamaica C3 Metals Inc. reported the discovery of a large-scale, intermediate sulfidation epithermal gold and copper vein swarm at the Company's 100% owned Arthurs Seat project. First rock chip assays from this discovery returned up to 14.2 g/t Au, 5.2% Cu and 53 g/t Ag. The Arthurs Seat project is in the highly prospective Crawle River-Rio Minho Fault Porphyry and Epithermal District of Jamaica. An extensive area of epithermal veins and breccias has been outlined on the Arthurs Seat project. Field mapping to date indicates quartz vein and breccia structures up to 25 metres in true width that have been discontinuously traced over two kilometres of strike. This newly discovered vein swarm is located approximately 500 metres southeast of the previously announced high-grade copper-silver mineralization (see assays up to 13.8% Cu and 492 g/t Ag in press release dated June 2, 2022). Exploration Highlights: Epithermal veins and breccias at the Crofts Hill target within Arthurs Seat: A true maiden discovery with no prior modern-day exploration - never drilled; A high density of intermediate sulfidation quartz vein and breccias over an area of 3 km x 2 km; Rock chip assays up to 14.2 g/t Au, 5.2% Cu, and 53 g/t Ag; Over 30% of the initial 137 rock chips collected assayed highly anomalous gold values; and Sheeted quartz vein and breccia zones up to 25m true width. Copper-Silver Zone at the Brandon Hill target within Arthurs Seat: Exploration limited to selective surface sampling in the 1960s - never drilled; Recently completed ridge and spur soils confirm a 2.5 km x 1.2 km copper in soil anomaly; and Discovery of amygdaloidal basalts flooded with secondary copper. Exploration Update: The Arthurs Seat project is situated over the regionally significant CRF District, a major mineralizing structure that bisects the island of Jamaica. Very little exploration has been carried out at Arthurs Seat with many areas having never been subject to field mapping and evaluation. Arthurs Seat is contiguous to the highly prospective Bellas Gate project, where C3 Metals is currently undertaking a 5,000-metre diamond drill program and recently announced an intersection of 309.0m at 0.44% Cu and 0.33 g/t Au in the upper portion of the first drill hole of the program (see press release dated September 12, 2022). C3 Metals' exploration activities continue to identify copper, gold and silver mineral occurrences throughout the Arthurs Seat project. The anomalous geochemical copper-gold-silver footprint has now been expanded to 7 km x 4 km, covering both Brandon Hill through to Crofts Hill. Although various mineralization styles have been identified, an important vein /breccia discovery at Crofts Hill confirms potential for a large-scale and well-preserved epithermal gold vein system. Epithermal Vein Discovery (Crofts Hill): The extensive field of intermediate sulfidation epithermal veins and breccia zones up to 25m wide is similar to the Pueblo Viejo epithermal gold-silver deposit in the Dominican Republic with Arthurs Seat epithermal veins are hosted in volcanic and volcaniclastic rocks of Cretaceous Age. Pueblo Viejo has reserves and resources that include proven and probable gold reserves of 5.7 million ounces; measured and indicated gold resources of 15.0 million ounces; and, inferred gold resources of 2.2 million ounces (Source https://mininglifeonline.net/company-article/pueblo-viejo/10531). Exploration activities undertaken thus far by C3 Metals have consisted of reconnaissance geologic mapping, ridge and spur soil sampling, the collection of representative rock chip and grab samples from different vein styles and spectrometer analyses. Mapping has outlined mineralized quartz veins and breccias over a 3 km x 2 km area at Crofts Hill. Assays have been received for 137 rock chip samples collected at Crofts Hill, with over 30% assaying highly anomalous gold and up to 14.2 g/t Au and 5.2% Cu. Annuncio • Sep 13
C3 Metals Inc. Intersects 309.0 Metres a 0.44% Copper and 0.33 g/t Gold in First Assays from Bellas Gate Project, Jamaica C3 Metals Inc. announced it has intersected 309 metres at 0.44% Cu and 0.33 g/t Au beginning 15 metres down hole. This result is from 330 metres of a 703 metre drill hole at the Company's 100% owned Bellas Gate Project in Jamaica. Two additional holes have been completed at the Epidote Ridge target (assays pending) within Bellas Gate. The total program is anticipated to be 5,000 metres. Bellas Gate, as well as C3 Metals' other projects in Jamaica, sit within the highly prospective Crawle River-Rio Minho Fault Porphyry and Epithermal District (CRF District). Drilling Highlights: Partial assays received for the first 330m of hole CON9325-001 returned 309.0m @ 0.44% Cu and 0.33 g/t Au from 15.0m. Cu-Au grades comparable to many porphyry deposits currently being mined. Drilling confirms mineralization is open to the west and at depth. Gold rich-porphyry mineralization confirmed and is associated with strong magnetite alteration. Geophysics (mag and IP) strongly supports downplunge continuity of mineralized body. Two additional holes completed into the Epidote Ridge target (assays pending). Drill rig mobilizing to northern end of Epidote Ridge to test a coincident magnetic and IP chargeability anomaly. To date, three holes have been completed to test the porphyry potential at the Epidote Ridge target, which is centrally located to five porphyry systems: Connors, Camel Hill, Geo Hill, Lucky Valley and Ginger Ridge. The first hole, CON9325-001, tested an interpreted hydrothermal channel way plunging to the east of Connors under Epidote Ridge. The Company is well-advanced on a 5,000-metre core drilling program to test several compelling, high-priority copper and gold porphyry targets. Annuncio • Sep 10
C3 Metals Inc. Announces Further Outstanding Results from its Phase 2 Drilling Program at the Jasperoide Copper-Gold Skarn/Porphyry Project in Peru C3 Metals Inc. announced further outstanding results from its Phase 2 drilling program at the Jasperoide copper-gold skarn/porphyry project in Peru. The recently completed Phase 2 drill program comprising a total 6,811m in 20 drill holes has delineated a near surface, high-grade oxide copper-gold deposit at the Montaña de Cobre Zone and tested copper-sulphide mineralization at the nearby Cresta Verde Zone. The Company also drilled two deep holes (JAS3000-6 and JAS2800-07) testing the system to depths of +1000m. While altered porphyry fragments were encountered, assays reported no significant copper mineralization. Outlook: Exploration permitting is underway for several of the newly acquired mineral concessions. As the permitting is being progressed, the Company will be undertaking sighter metallurgy leach and flotation test work on the copper-gold oxide mineralization at MCZ to assess recoveries, acid consumption and variability characteristics for the different material types within the deposit delineated to date. The metallurgical response of the different material types aims to assess the potential viability of various processing options for the near surface oxide copper and gold mineralization and is an important de- risking milestone for the Company. Initial review of the newly acquired land package surrounding Jasperoide indicates high potential for the discovery of additional near surface copper skarn deposits similar to the MCZ deposit. Upon receipt of the exploration permits for these areas, C3 Metals plans to aggressively explore to build the inventory of near surface skarn hosted copper-gold mineralization and test potential for large scale porphyry systems. Recent Insider Transactions • Sep 03
Executive Chairman recently bought CA$90k worth of stock On the 31st of August, Antony Manini bought around 2m shares on-market at roughly CA$0.045 per share. This transaction amounted to 25% of their direct individual holding at the time of the trade. This was the largest purchase by an insider in the last 3 months. This was Antony's only on-market trade for the last 12 months. Annuncio • Jun 04
C3 Metals Inc. Discovers High Grade Copper-Silver At Arthurs Seat, Jamaica C3 Metals Inc. reported surface reconnaissance results from mapping and sampling at the Arthurs Seat Project in Jamaica. Arthurs Seat is one of four Jamaican projects owned 100% by the Company and is located adjacent to the Company's Bellas Gate property where the Company has commenced a 5,000 metre drill program. Exploration to date at Arthurs Seat has defined a 6.75 km2 prospective area of copper mineralized veins and breccias interpreted to represent the upper part of an underlying porphyry system. Magnetics, mapping and detailed prospecting are continuing. The Arthurs Seat Special Exclusive Prospecting License is situated directly over the regionally significant Crawl River Fault Zone and associated splays, a major structure controlling copper-gold mineralization in Jamaica. Mining was undertaken by the Spanish in the 16th Century and the British in the 19th Century. No modern-day exploration has been carried out within the Arthurs Seat SEPL since a reconnaissance program was conducted by Noranda Inc. in the mid 1960's. A stream/heavy mineral sampling program funded by the Canadian International Development Agency (CIDA) was completed in the 1980's. Arthurs Seat is contiguous to its highly prospective Bellas Gate SEPL, where at least 12 porphyry prospects have been confirmed along Porphyry Alley and where the Company has commenced a 5,000- metre diamond drilling program to test a number of compelling copper-gold targets. The Company recently completed geological mapping and prospecting over a 10 km2 area in the eastern part of Arthurs Seat. A total of 103 rock samples were collected from mineralized intermediate sulfidation style epithermal quartz veins and breccias that cross-cut andesitic volcanic-volcaniclastic rocks and Cretaceous aged limestones of the Arthurs Seat Formation. Copper mineralization comprises primary bornite, tennantite-tetrahedrite and associated secondary copper species including native copper. Of the 103 samples collected, 55 assayed greater than 0.15% copper with numerous samples of both outcrop and float reporting high grades up to 13.8% copper and 492g/t silver. Geological mapping and prospecting will continue at Arthurs Seat and ridge/spur soil sampling has been initiated over the eastern SEPL area. The team is assessing the rock sample results in conjunction with new mapping to formulate plans for ground geophysics and drill testing. Annuncio • May 28
C3 Metals Inc. to Commence Drilling Copper-Gold Porphyry Targets in Jamaica C3 Metals Inc. announce that the 5,000 metre drilling program at the Company's 100% owned Bellas Gate copper-gold porphyry project in Jamaica will commence this weekend. Drilling is designed to test multiple porphyry copper targets identified within the regionally significant Crawl River Fault zone. Drilling will also target epithermal gold prospects on the property. Twelve porphyry systems and multiple epithermal occurrences have been identified in the project area to date. Program Highlights: The Epidote Ridge prospect area is located within the Bellas Gate SEPL and specifically within Porphyry Alley, a cluster of porphyries along the Crawl River Fault Zone Epidote Ridge is the first drill target, an interpreted preserved porphyry centre linked to porphyry copper-gold prospects known as Connors, Geo Hill and Camel Hill Strong copper-gold mineralization intersected at Connors, Geo Hill and Camel prospects is interpreted to converge beneath Epidote Ridge Shallow historic drilling at Connors and Camel Hill intersected good copper and gold grades as highlighted below Connors results: 114.0m @ 0.69% Cu, 0.52 g/t Au in CON-14-004, 84.0m @ 1.00% Cu, 0.77 g/t Au in CON-14-005 1 Camel Hill results: 137.2m @ 0.56% Cu, 0.25g/t Au in CAM92-01 1, 85.0m @ 0.52% Cu, 0.25g/t Au in CAM92-05 1, Post Eidote Ridge drilling, the rig will test other high potential porphyry prospects, including Coffee, Lucky Valley, Geo Hill and White Rock Ridge, followed by epithermal copper-gold- silver targets at Charing Cross and Stamford Hill Details of the Drilling Program: Over the past year, the Company compiled all historical exploration data on its Jamaican Exclusive Prospecting Licenses and refined the geological and mineralization models for Bellas Gate. The review identified significant porphyry copper-gold potential beneath Epidote Ridge, where down dip extensions of the Connors and Camel porphyry copper-gold deposits are interpreted to converge. Epidote Ridge is characterized by intense epidote alteration over a nine square kilometre area and is associated with highly anomalous copper in soil geochemistry and coincident magnetic and IP chargeability features at depth. The geochemical and geophysical signatures at Geo Hill, Camel Hill and Connors are similar to Epidote Ridge, making it the most compelling and highest priority porphyry drill target in Bellas Gate. Annuncio • May 18
C3 Metals Inc.'s Deep Drilling Provides Key Evidence of Porphyry System at Jasperoide Project, Peru C3 Metals Inc. announced that the Company's deep core drilling at its Jasperoide copper-gold skarn/porphyry project in southern Peru has intersected a hydrothermal alteration system beneath the Montaña de Cobre zone. Drilling intersected a multi-phase hydrothermal alteration system that iscoincident with a large Hybrid CSAMT anomaly and indicative of a classic porphyry model. Phase 2 drilling is well underway, with the first deep hole (JAS3000-06) completed to 1,180m depth and the second hole (JAS2800-7) currently in progress at 1,050 metres depth. Drill holes are testing the multiple targets at Montaña de Cobre, Cresta Verde, Callejón de Oro and a newly identified target at Domo Verde zone. Priority targets are defined by copper and gold soil geochemical anomalies with coincident Hybrid-CSAMT, IP-Chargeability and magnetic anomies. Additional infill holes are also planned within the Montaña de Cobre zone in areas of low drill data density. The first deep hole, JAS3000-06 tested beneath a large zone of clay alteration exposed west of the Montaña de Cobre zone which is interpreted as advanced argillic alteration. The drill hole encountered varied intensity of garnet-diopside alteration in diorite, overprinted by bladed mushketovite (magnetite after hematite) and calcite veins from surface to 350m depth. Intercalated limestone, intensely marbleized and bleached white limestone and localized breccias and calcite stockwork veins occur from 350m down hole. High-sulphidation breccias and veins locally contain sphalerite and trace galena. Select intervals have been sent for analysis and results are expected in the coming weeks. The second deep hole, JAS2800-7 is collared on Line JAS2800 and is drilling adjacent to and beneath a large zone of magnetite alteration. This hole is testing a discrete resistive feature located proximal to a high sulphidation feeder structure intersected in JAS2700-04 and strong copper-gold mineralization intersected in JAS2750-07, which returned 106.1m @ 0.99% Cu and 0.28 g/t Au from surface .Hole JAS2800-07 encountered skarn and marbleized carbonate rocks to 200m depth, which locally contain up to 10% "copper-wad" oxide ineralization. Downhole to 950 metres is intercalated limestone, mudstone and intensely marbleized limestone that are crosscut by polymict breccias containing trace to 20% pyrite. At approximately 950m, the hole intersected pervasive late stage epithermal calcite veins and breccias that are overprinted by pyrite veins with visible molybdenite. The breccias locally contain intensely phyllic altered diorite porphyry fragments with abundant disseminatedpyrite (Figure 3). Additional updates are planned as this hole progresses. The Phase 1 drill program is now complete and has defined a shallow dipping oxide copper-gold skarn domain that is laterally extensive for up to 650 metres and has a strike length of more than 400 metres. True thickness of the copper-gold mineralization varies from 50 to 250 metres and is open to the north, west and at depth. Additional infill holes are planned to target areas with limited or no drill data at northern Montaña de Cobre. The five holes reported below were designed to define the limits of the known mineralization at the Montaña de Cobre zone. Although assay results are lower grade, these holes demonstrate that near- surface copper-gold skarn mineralization continues beyond Line JAS3000, along trend of the Benoni Fault and Cresta Verde zone. Annuncio • Feb 24
C3 Metals Drills 32.4m at 3.75% Copper at Jasperoide Drilling on Deeper Targets Underway C3 Metals Inc. provided an update on its drilling programs at the Jasperoide copper-gold skarn/porphyry project in southern Peru. Results received for five of the ten outstanding drill holes included some of the highest copper grades reported on the project to date. High grade oxide copper-gold mineralization was intersected in two holes drilled to test the up dip and lateral continuity of the enrichment zone defined at eastern Montaña de Cobre Zone. Results include: Hole JAS2700-09: 32.4m @ 3.75% Cu, 0.80 g/t Au from 84.0m, including 20.1m @ 5.83% Cu, 0.87 g/t Au from 96.3m, including 4.9m @ 16.5% Cu from 111.5m. Hole JAS2700-10: 15.1m @ 2.02% Cu and 0.37 g/t Au from 89.3m and Including 2.8m @ 10.29% Cu from 100.1m. The Company is also pleased to report that the recently arrived larger rig is currently drilling the first of several deeper holes targeting potential stacked skarns and underlying porphyry copper-gold deposits at the Montaña de Cobre Zone. An initial 5,000 meters of drilling is in progress to assess the potential for stacked skarns and porphyries at deeper levels of the mineralized systems at the Montaña de Cobre and Cresta Verde Zones. Drill hole targeting is based in part on data collected from a Hybrid-CSAMT geophysical survey that identified two sub-vertical resistive features which are interpreted to be coincident with the district-scale Constancia and Benoni Faults. The Hybrid-CSAMT model indicates that feeder structures to the Montaña de Cobre Zone copper-gold mineralization are connected to a large resistive feature/body at depth, interpreted as a concealed porphyry. Recent drilling at the Montaña de Cobre Zone continues to define a shallow dipping, oxide copper-gold domain that is laterally extensive for up to 650 metres and has a strike length of more than 450 metres. The mineralized skarn system at the Montaña de Cobre Zone remains open to the north, west and down- dip, with significant potential for stacked skarns and porphyry style mineralization at depth and along strike. Assays for drill holes JAS2700-09, 10 and 11 intersected thick zones (50m to +100m) of skarn altered carbonate rocks of the Ferrobamba Formation with secondary copper species (chrysocolla, malachite, azurite) and locally primary sulphides (pyrite ± chalcopyrite). Drill hole JAS2700-09 successfully confirmed extensions to the bonaza grade copper mineralization intersected 60m to the west in JAS2700-07, which intersected 43.45m @ 2.21% Cu and 0.49 g/t Au from 85.85m and included 15.0m @ 5.44% Cu and 0.39 g/t Au from 113.5m. Drill hole JAS2700-09 continued to define a well developed enrichment zone proximal to the marble front. JAS2700-09 returned 20.1m @ 5.83% Cu and 0.87 g/t Au from 96.3m including 4.9m @ 16.5% from 111.5m. Two holes were completed at southern Montaña de Cobre Zone on section line JAS2500, collared 100m southeast of section line JAS2600. JAS2500-01 and 02 intersected narrow widths of strongly oxidized garnet-diopside and magnetite skarn that returned low grade copper-gold mineralization. Exploration data for the Montaña de Cobre Zone is being evaluated in order to define targets for additional drilling. Annuncio • Feb 08
C3 Metals Inc. Announces Second and Larger Drill Rig on Site at Jasperoide, Peru C3 Metals Inc. announced second and larger drill rig on site at Jasperoide, Peru. The new rig is set up on the first drill platform to test a high potential porphyry and stacked skarn copper-gold target delineated from recently acquired geophysical data coupled with 2021 drill results. Deeper capacity rig on site to test high priority copper-gold porphyry and stacked skarn targets at the Montaña de Cobre and Cresta Verde zones. First hole at Montaña de Cobre has commenced testing coincident geophysical targets (Hybrid CSAMT and IP) proximal to the intersection of large scale faults which transect the nearby copper mine deposits at Las Bambas and Constancia. Cresta Verde drilling to test for higher grades below massive sulphide skarn hosted copper-molybdenite mineralization intersected in 2021 drilling. Drilling at the Montaña de Cobre copper oxide skarn deposit is expected to be completed shortly. The smaller capacity rig will then be demobilized, 2021 Exploration Summary: The initial 2021 exploration program at Jasperoide comprised drilling, airborne magnetics, ground IP, Hybrid CSAMT ("HCSAMT"), TerraSpec4 Hi-Res spectrometer alteration mineralogy, petrology, core re-sampling, a structural analysis of the Jasperoide district, detailed relogging of drill core, geological mapping and sampling. Results have provided a wealth of information to advance understanding of the hydrothermal processes at Jasperoide and the potential for discovery of a porphyry system at depth. A total of 46 drill holes have been completed to date for 11,743m, comprising 8,552m in 40 holes at Montaña de Cobre zone and 3,191m in six holes at the Cresta Verde zone. Results of the drilling and associated exploration programs are consistent with a large scale porphyry /skarn hydrothermal system. At the Montaña de Cobre zone, drilling has defined a shallow dipping and well developed oxide copper-gold skarn deposit with associated structurally controlled high sulphidation mineralization. below details geological observations in drill core which provide strong supporting evidence for a proximal causative porphyry intrusion. An interpretation of the recently completed first pass Hybrid CSAMT geophysical survey indicates the skarn /high sulphidation feeder structures observed at the Montaña de Cobre zone transition to a potential porphyry system at depth. Inversion of the Hybrid CSAMT data shows a sub-vertical resistive feature (silicified Benoni Fault) which appears to connect the Montaña de Cobre zone to a much larger resistive feature interpreted as a porphyry centre at depth. An initial 5,000 metres of drilling is planned to assess the coincident geophysics, structural and geochemical target areas at the Montaña de Cobre and Cresta Verde zones. Following the initial success of the Hybrid CSAMT, an expanded survey to cover the entire permitted area is expected to be completed this month. The data will be used to refine drill targeting at the Cresta Verde zone down-dip of the near surface mineralized skarn and massive sulphides that were intersected in JAS4350-02. Annuncio • Jan 13
C3 Metals Inc. Resumes Drilling at Jasperoide - Geophysics Defines Porphyry Targets C3 Metals Inc. announced the 2022 exploration program at the company's Jasperoide Project is well underway with a larger drill rig expected on site early February to replace a smaller capacity rig. A Hybrid Controlled Source Audio-Magnetotelluric (Hybrid CSAMT) survey test was completed over the Montaña de Cobre and the Cresta Verde zones, which has identified probable feeder structures linked to a potential causative copper-gold porphyry system at depth. The larger drill rig has the depth capacity to test these targets. The existing rig will continue drilling on the Montaña de Cobre zone to further extend and evaluate the oxide copper-gold deposit delineated to date until it is changed out. Survey highlights: Newly acquired Hybrid CSAMT geophysical data indicates a potential causative intrusion at depth central to mineralization at the Montaña de Cobre and Cresta Verde zones Strong resistivity features are identified at the intersection of the regional-scale Benoni and Constancia Faults which transect the large-scale Las Bambas and Constancia copper mines respectively 3D geophysical modelling highlights a potential cluster of intrusive bodies linked to mineralizing fault conduits confirming earlier geological models for Jasperoide The Hybrid CSAMT survey has been extended to rapidly cover the entire area permitted for exploration and drilling over the next month. A second deeper capacity drill rig is being mobilized to site to test these compelling concealed copper-gold porphyry and stacked skarn targets. Annuncio • Aug 31
C3 Metals Inc. Identifies Significant Porphyry and Epithermal Copper-Gold Potential at the Bellas Gate Project, Jamaica C3 Metals Inc. reported that it has completed a comprehensive review of exploration data and associated follow up field assessment for the Company's 100% owned Bellas Gate property, located along the highly prospective porphyry belt of central Jamaica. Bellas Gate hosts over 40 known copper and gold prospects and mineral occurrences, including two advanced stage porphyry copper-gold prospects at Connors and Camel Hill and two highly prospective porphyry targets at Epidote Ridge and Coffee. This project evaluation has delineated compelling porphyry and epithermal vein targets which can rapidly be advanced to drill status. Highlights of Historic Data Review and Recent Exploration Program at Bellas Gate Property; 10 porphyry copper-gold and > 30 epithermal gold occurrences within a 5 x 3 km area Porphyry Cu-Au mineralization at Connors and Camel Hill prospects is open at depth and along strike; select historic drill results include: Connors 114.0m @ 0.69% Cu, 0.52g/t Au in CON-14-004 (from 28.0m). Camel Hill 137.2m @ 0.56% Cu, 0.25g/t Au in CAM92-01 (from surface). Porphyry style alteration and veining immediately adjacent to Connors and Camel Hill occurs coincident with discrete magnetic and IP chargeability anomalies and represents a compelling drill target for a concealed porphyry system. Coffee porphyry target located along the Camel Hill - Connors porphyry trend displays favourable alteration and veining with copper mineralization, an excellent walk-up drill target. Enriched epithermal vein systems at Stamford Hill, Dry Hill, Charing Cross, Elma, Victoria and Congo Hill prospects were exploited historically by the Spanish and British Over 50 historic copper occurrences identified at Arthurs Seat, located north of Bellas Gate; none of which have been evaluated or drill tested. Annuncio • Jun 17
C3 Metals Commences Geophysics Surveys at Jasperoide Project, Peru C3 Metals Inc. announce the commencement of a geophysical program at the company's Jasperoide Project to guide deeper drilling of high-grade copper-gold mineralization intersected near the Montaña de Cobre Zone and to define additional targets for drilling. The program will include an 1,800 line km helicopter-borne magnetic and radiometric survey and a 43 line km ground Induced Polarisation (IP) survey. Completing these surveys is a major step forward in advancing the exploration and development of Jasperoide, and an exceptional opportunity for skarn, porphyry and epithermal style discoveries. C3 Metals' Maiden drill results from the Montaña de Cobre Zone returned broad intercepts of high-grade oxide copper-gold, including 53.2m @ 3.46% CuEq in JAS2650-05 from 92.6m and 117.3m @ 1.45% CuEq from 1.7m in JAS2650-06 incl. 60.0m @ 2.51% CuEq from 59.0m. Near surface skarn mineralization is dominated by secondary copper species, including malachite, azurite, chalcocite and chrysocolla in host lithologies that are typically magnetite-rich. An unoxidized polymictic breccia intersected close to the skarn - marble contact in JAS2650-04 contains mineralized fragments of tonalite porphyry with an estimated 3-5% chalcopyrite providing an excellent indicator of a potential mineralized porphyry at depth. Recent drilling on section JAS2700 (assays pending) intersected broad intervals of unoxidized magnetite skarn below the supergene enrichment zone showing fine and coarse chalcopyrite and pyrite as infill and disseminations. The presence of sulphides in skarn combined with the identification of mineralized tonalite (porphyry) in breccia provides evidence that a causative porphyry system exists at depth. Existing ground magnetic data (only 9km2 previously covered of the total 57km2 land package) shows that mineralized magnetite-rich bodies appear as discrete anomalies. Completion of the large airborne survey, including 3D airborne magnetic inversions, will be followed by field verification and prioritizing of anomalies for drill testing. The ground IP survey is considered essential to the next phase of targeted drilling. As IP chargeability is very sensitive to disseminated sulphide mineralization, resulting anomalies could potentially represent copper-rich sulphide zones at depth and along strike of the Montaña de Cobre Zone. Coincident chargeability and magnetic anomalies will be prioritized in the drilling to follow the current 10,000m drilling program. Annuncio • May 26
C3 Metals Confirms High Grade Cu-Au Mineralization at Jasperoide Project, Peru C3 Metals Inc. announced first assay results from its drill program at the Jasperoide Copper- Gold Project in southern Peru. Drilling commenced in February in the southern Montaña de Cobre Zone with 15 holes now completed on two section lines for a total of 3,647m. Results from seven holes on the first drill section intersected broad zones of high-grade copper-gold mineralization within a larger low- moderate grade envelope. The drill program will now proceed to its planned 10,000m looking to expand the near surface copper-gold footprint. Recent Insider Transactions Derivative • Mar 27
Independent Chairman exercised options to buy CA$170k worth of stock. On the 23rd of March, Antony Manini exercised options to buy 1m shares at a strike price of around CA$0.10, costing a total of CA$100k. This transaction amounted to 7.2% of their direct individual holding at the time of the trade. Since September 2020, Antony's direct individual holding has increased from 12.93m shares to 13.93m. Company insiders have collectively bought CA$659k more than they sold, via options and on-market transactions, in the last 12 months. Executive Departure • Mar 05
Independent Director has left the company On the 23rd of February, Alar Soever's tenure as Independent Director ended after 10.8 years in the role. We don't have any record of a personal shareholding under Alar's name. Alar is the only executive to leave the company over the last 12 months. Annuncio • Feb 23
C3 Metals Announces the Commencement of C3 Metals C3 Metals Corp. announced the commencement of drilling at its flagship Jasperoide Copper-Gold Project in southern Peru. The rig is set up on the first drill platform at the Montaña de Cobre Zone. Highlights Include: Phase 1 programme comprising 3,500m in 15 holes has commenced drill testing a large-scale, copper-gold skarn-porphyry system developed over more than three kilometres of strike length Historic drilling returned grades such as 185.2m at 1.00% Cu, 0.39g/t Au (JADD11-03) from 22.0m1 depth Initial drilling will also test an epithermal gold target at Callejón de Oro Zone where prior trenching and channel sampling returned high grades of 11m at 19.5g/t Au. Annuncio • Feb 19
C3 Metals Inc. announced that it has received CAD 7.414509 million in funding On February 18, 2021, C3 Metals Inc. (TSXV:CCCM) closed the transaction. The company issued 21,984,287 common shares at a price of CAD 0.14 per share for aggregate gross proceeds of CAD 3,077,800. The company has issued an aggregate of 52,960,779 shares were issued for gross proceeds of CAD 7,414,509, including the exercise of the agents over allotment option. The offering is subject to the final acceptance of the TSX Venture Exchange. Annuncio • Jan 20
C3 Metals Inc. announced that it expects to receive CAD 4.00008 million in funding C3 Metals Inc. (TSXV:CCCM) announced it has entered into a letter engagement with placement agent Eight Capital Corp for private placement of up to 28,572,000 common shares on best efforts basis at a price of CAD 0.14 for the gross proceeds of up to CAD 4,000,080 on January 19, 2021. The company has granted the agents an over-allotment option to distribute up to an additional 4,285,800 shares at the Issue Price, exercisable in whole or in part at any time within 48 hours prior to the closing of the offering. If this option is exercised in full, an additional approximately CAD 600,000 will be raised and the aggregate proceeds of the offering will be approximately CAD 4,600,000. The transaction is expected to close on or before February 5, 2021. The transaction is subject to regulatory and TSX Venture Exchange approval. Annuncio • Jan 16
C3 Metals Core Resampling Programme Confirms Historic Copper-Gold Assays at Jasperoide Project, Peru C3 Metals Corp. (the "Company") announced that it has completed a core resampling programme at its Jasperoide Copper-Gold project in Peru. The resampling programme focussed on core from seven holes that were drilled by Hochschild in 2011-12, totaling approximately 645m. The programme was initiated to confirm the distribution and tenor of the skarn hosted copper-gold mineralization and to verify historic results for future resource calculations. Results from the programme confirm both the successful verification of, and significant copper intercepts in all seven holes. The Company's Phase 1 drilling programme will commence as soon as the drill camp has been completed, which is well underway. The upcoming programme comprises an initial 3,500m in approximately 15-20 holes of 100-250m depth, nominally on 50m centres and is designed to demonstrate lateral and vertical continuity of the high-grade copper-gold mineralization. Drilling will start in the south and move northward along the targeted contact between the intrusive complex and the Ferrobamba Formation. A comprehensive exploration database has been compiled for the Jasperoide Project that includes surface exploration and drilling data generated by different exploration companies since 1994. A total of
10,175.7m in 52 holes was completed in three drilling campaigns at Jasperoide, conducted in 1994 (2,689.89m in 14 holes), 1996 (1,854.2m in 13 holes) and 2011-12 (5,632.32m in 25 holes). Previous explorers focussed on assaying drill core for copper and gold and selectively analyzed the core for a multi-element package. It was expected that previous programmes had followed protocols that are adhered to with respect to chain of custody and quality control (QAQC) and this reassay programme has confirmed the historic data. Most drill core is still available from the 2011-12 campaign, which has been kept in a secure storage facility in Lima, Peru. Seven holes were selected based on alteration and copper-gold mineralization styles that are considered representative of the broader hydrothermal system at Jasperoide. A total of 404 samples of well-preserved half core were collected from seven drill holes and submitted to ALS Chemex laboratories in Peru. Sample intervals were taken according to previously sampled intervals and the same analytical method (ME-ICP41) was utilized; Aqua Regia with multi-element ICP (35 elements) and fire assay for gold with atomic absorption spectroscopy. Jasperoide is defined by exoskarn, endoskarn and porphyry style copper-gold mineralization that has
been mapped at surface for more than 3km, defined in drill holes, trenches, and the limited surface geochemical data. Strong magnetic and chargeability anomalies have been identified along the contact zone between carbonate rocks of the Ferrobamba Formation and the multi-phase intrusive complex at Jasperoide, indicating strong potential for additional zones of skarn and porphyry mineralization. As previously announced, the Company has initiated a comprehensive surface exploration mapping and sampling programme, which includes statistical analysis of historic surface exploration data, multi-element soil geochemical surveys, trenching across epithermal style vein systems and district scale geological mapping. Results from this programme and the relogging /reassay programme will be incorporated into the exploration database and utilized in the development of a 3D geologic block model for the Jasperoide skarn/porphyry district. As stated above, an initial 3,500m of drilling in approximately 15-20 holes of 100-250m depth is scheduled to commence soon. Annuncio • Dec 23
C3 Metals Inc., Annual General Meeting, Feb 23, 2021 C3 Metals Inc., Annual General Meeting, Feb 23, 2021. Annuncio • Dec 02
C3 Metals Inc. Appoints of Fernando Pickmann as A Director C3 Metals Inc. announced appointment of Fernando Pickmann as a Director of the Company effective December 1st, 2020. Fernando is a well-known, highly respected mining lawyer, company director and member of the business community in Peru with over 20 years' experience advising government and national and international mining and exploration companies in Peru, including a number of highly successful TSX listed juniors. Fernando has acted as an internal advisor to the Peruvian Government, been a board member of PeruPetro, the Peruvian agency for oil and gas, and was a Professor of Mining Law and Strategic Alliances at Lima University. He is currently a partner of Dentons law firm based in Lima specialising in the Peruvian mining sector, a Director and President of TSX-V listed Regulus Resources and a Director of Aldebaran Resources Inc. Recent Insider Transactions • Oct 23
Executive Chairman recently bought CA$110k worth of stock On the 16th of October, Antony Manini bought around 2m shares on-market at roughly CA$0.055 per share. In the last 3 months, they made an even bigger purchase worth CA$145k. Antony has been a buyer over the last 12 months, purchasing a net total of CA$289k worth in shares. Annuncio • Oct 06
C3 Metals Highlights Potential Large-Scale Cu-Au System At Jasperoide, Peru C3 Metals Inc. reported that it has completed a comprehensive review of all historical data for the Jasperoide Porphyry-Skarn-district, located along the highly prospective Andahuaylas-Yauri Porphyry-Skarn belt of Peru. This belt hosts several large copper porphyry and skarn deposits, including Las Bambas (MMG), Constancia (Hudbay) and Antapaccay (Glencore). Three high-priority areas for immediate follow up surface exploration and drilling have been identified. Montaña de Cobre: Extensive 1.5 kilometres of strong copper and gold mineralization hosted in massive magnetite and garnet- diopside skarns coincident with an intense geophysical magnetic high, Previous drilling intersected wide intervals of ore grade copper-gold mineralization which include: 185.2m at 1.00% Cu, 0.39g/t Au in JADD11-03 (from 22.0m), 114.9m at 0.97% Cu, 0.37g/t Au in JADD12-03 (from 37.1m), including 34.5m at 2.55% Cu, 0.69g/t Au (from 103.5m), 40.3m at 3.54% Cu, 0.33g/t Au in JADD11-10 (from 70m), includes 24.3m at 5.76% Cu, 0.10g/t Au (from 86m). Proximal diorite porphyry shows strong endoskarn and phyllic alteration with porphyry B-type veining. Mineralization remains open in all directions. Cresta Verde: Outcropping massive magnetite skarn hosted copper-gold mineralization coincident with a strong magnetic anomaly extending north from Montaña de Cobre. A single historic drill hole into the magnetic feature intersected 23.5m at 1.86% Cu (JADD11-20 from 19m). Three kilometres of untested strike potential for immediate step out drilling. Callejón de Oro: Strong magnetic anomaly extending for >1.2km to the southwest of Montaña de Cobre, High grade epithermal-style gold mineralization in trenches and soils, Results from Trench 24 and a single drill hole respectively include: 11m at 19.5g/t Au and 1.23m at 27.2g/t Au (from 210.9m). Target has been the subject of minimal scout drilling and remains highly prospective. Annuncio • Sep 01
C3 Metals Inc. announced that it has received CAD 2.400001 million in funding On August 26, 2020, C3 Metals Inc. (TSXV:CCCM) closed the transaction. The company issued 43,636,381 common shares for gross proceeds of CAD 2,400,001 in the transaction. The transaction included participation from certain directors and officers of the company for 1,613,657 shares and other investors. The company paid finder's fee of CAD 96,525 in cash and issued 1,755,000 finder’s warrants. Each finder’s warrant entitles the holder to purchase common shares at a price of CAD 0.055 per share until their expiry date on August 26, 2022. Annuncio • Aug 06
Carube Copper Corp. announced that it expects to receive CAD 2.2 million in funding Carube Copper Corp. (TSXV:CUC) announced a non-brokered private placement of 40,000,000 common shares at a price of CAD 0.055 for the gross proceeds of CAD 2,200,000 on August 5, 2020. The company may pay finder’s fee equal to 7% and finder’s warrant in the transaction. Each finder’s warrant entitles the holder to purchase common shares at a price of CAD 0.055 per common share. All securities issued are subject to a four-month and one day statutory hold period. The transaction is expected to close on or before August 13, 2020. The transaction is subject to TSX Venture Exchange approval.