Recent Insider Transactions Derivative • Apr 16
CFO & Director exercised options to buy CA$112k worth of stock. On the 7th of April, Dale McClanaghan exercised options to buy 545k shares at a strike price of around CA$0.15, costing a total of CA$84k. This transaction amounted to 10% of their direct individual holding at the time of the trade. Since June 2025, Dale's direct individual holding has increased from 4.89m shares to 5.24m. Company insiders have collectively bought CA$138k more than they sold, via options and on-market transactions, in the last 12 months. New Risk • Apr 01
New minor risk - Share price stability The company's share price has been volatile over the past 3 months. It is more volatile than 75% of Canadian stocks, typically moving 15% a week. This is considered a minor risk. Share price volatility indicates the stock is highly sensitive to market conditions or economic conditions rather than being sensitive to its own business performance, which may also be inconsistent. It also increases the risk of potential losses in the short term as the stock tends to have larger drops in price more frequently than other stocks. Currently, the following risks have been identified for the company: Major Risks Earnings have declined by 12% per year over the past 5 years. Shareholders have been substantially diluted in the past year (31% increase in shares outstanding). Revenue is less than US$1m. Minor Risks Share price has been volatile over the past 3 months (15% average weekly change). Market cap is less than US$100m (CA$56.0m market cap, or US$40.3m). New Risk • Feb 25
New major risk - Shareholder dilution The company's shareholders have been substantially diluted in the past year. Increase in shares outstanding: 32% This is considered a major risk. Shareholder dilution occurs when there is an increase in the number of shares on issue that is not proportionally distributed between all shareholders. Often due to the company raising equity capital or some options being converted into stock. All else being equal, if there are more shares outstanding then each existing share will be entitled to a lower proportion of the company's total earnings, thus reducing earnings per share (EPS). While dilution might not always result in lower EPS (like if the company is using the capital to fund an EPS accretive acquisition) in a lot cases it does, along with lower dividends per share and less voting power at shareholder meetings. Currently, the following risks have been identified for the company: Major Risks Earnings have declined by 12% per year over the past 5 years. Shareholders have been substantially diluted in the past year (32% increase in shares outstanding). Revenue is less than US$1m. Minor Risk Market cap is less than US$100m (CA$46.3m market cap, or US$33.8m). New Risk • Feb 11
New major risk - Shareholder dilution The company's shareholders have been substantially diluted in the past year. Increase in shares outstanding: 32% This is considered a major risk. Shareholder dilution occurs when there is an increase in the number of shares on issue that is not proportionally distributed between all shareholders. Often due to the company raising equity capital or some options being converted into stock. All else being equal, if there are more shares outstanding then each existing share will be entitled to a lower proportion of the company's total earnings, thus reducing earnings per share (EPS). While dilution might not always result in lower EPS (like if the company is using the capital to fund an EPS accretive acquisition) in a lot cases it does, along with lower dividends per share and less voting power at shareholder meetings. Currently, the following risks have been identified for the company: Major Risks Earnings have declined by 12% per year over the past 5 years. Shareholders have been substantially diluted in the past year (32% increase in shares outstanding). Revenue is less than US$1m. Minor Risks Share price has been volatile over the past 3 months (16% average weekly change). Market cap is less than US$100m (CA$52.4m market cap, or US$38.6m). Annuncio • Feb 11
BCM Resources Corporation announced that it has received CAD 7.24 million in funding On February 10, 2026, BCM Resources Corporation closed the transaction. The Warrants are subject to an acceleration clause in favor of the Issuer. After four months and one day from the closing, if the share price is CAD 0.45 or higher for 20 consecutive trading days the Issuer will be entitled to accelerate the expiration of the warrants to the date that is 30 business days from the date of the issuance of a news release by the Company announcing the exercise of the acceleration clause. An Insider of the Company, purchased a total of 4,675,000 units in the amount of CAD 935,000. The Company has relied on the exemptions from the valuation and minority shareholder approval requirements of MI 61-101 contained in Sections 5.5(a) and 5.7(1)(a) of MI 61-101 in respect of the Insider participant. Total finder's Fees in the amount of CAD 61,250 (5% of some subscriptions) and 306,250 (5% of some subscriptions) in non-transferable 12-month CAD 0.30 per share broker warrants were paid on the placement. The aforementioned accelerator clause is also applicable to the broker warrants. New Risk • Jan 18
New major risk - Financial position The company has less than a year of cash runway based on its current free cash flow trend. Free cash flow: -CA$2.4m This is considered a major risk. With less than a year's worth of cash, the company will need to raise capital or take on debt unless its cash flows improve. This would dilute existing shareholders or increase balance sheet risk. Currently, the following risks have been identified for the company: Major Risks Less than 1 year of cash runway based on free cash flow trend (-CA$2.4m free cash flow). Earnings have declined by 20% per year over the past 5 years. Revenue is less than US$1m. Minor Risks Share price has been volatile over the past 3 months (17% average weekly change). Market cap is less than US$100m (CA$40.5m market cap, or US$29.1m). New Risk • Nov 27
New minor risk - Share price stability The company's share price has been volatile over the past 3 months. It is more volatile than 75% of Canadian stocks, typically moving 15% a week. This is considered a minor risk. Share price volatility indicates the stock is highly sensitive to market conditions or economic conditions rather than being sensitive to its own business performance, which may also be inconsistent. It also increases the risk of potential losses in the short term as the stock tends to have larger drops in price more frequently than other stocks. Currently, the following risks have been identified for the company: Major Risks Earnings have declined by 29% per year over the past 5 years. Revenue is less than US$1m. Minor Risks Share price has been volatile over the past 3 months (15% average weekly change). Market cap is less than US$100m (CA$22.6m market cap, or US$16.1m). Annuncio • May 29
BCM Resources Corporation announced that it has received CAD 2.575 million in funding On May 28, 2025, BCM Resources Corporation closed the transaction. The company is not paying any finder's fees in connection with the financing. The sole subscriber of the financing is a private mining company, which views this as a strategic long-term investment. Annuncio • May 14
BCM Resources Corporation announced that it expects to receive CAD 2.575 million in funding BCM Resources Corporation announced a non-brokered private placement of 20,600,000 units at a price of CAD 0.125 per unit for the gross proceeds of CAD 2,575,000 on May 13, 2025. Each unit comprises one common share of the company and one common share purchase warrant. Each whole warrant entitles the holder to purchase one common share of the company at a price of CAD 0.25 for a period of one year from the date of issue. All the securities issuable will be subject to a four-month hold period from the date of issue. The financing is subject to approval by the TSX Venture Exchange. Annuncio • Apr 21
BCM Resources Corporation, Annual General Meeting, Jun 16, 2025 BCM Resources Corporation, Annual General Meeting, Jun 16, 2025. Location: british columbia, vancouver Canada New Risk • Dec 31
New major risk - Financial position The company has less than a year of cash runway based on its current free cash flow trend. Free cash flow: -CA$69k This is considered a major risk. With less than a year's worth of cash, the company will need to raise capital or take on debt unless its cash flows improve. This would dilute existing shareholders or increase balance sheet risk. Currently, the following risks have been identified for the company: Major Risks Less than 1 year of cash runway based on free cash flow trend (-CA$69k free cash flow). Share price has been highly volatile over the past 3 months (23% average weekly change). Earnings have declined by 46% per year over the past 5 years. Revenue is less than US$1m. Market cap is less than US$10m (CA$7.62m market cap, or US$5.29m). Minor Risk Shareholders have been diluted in the past year (3.3% increase in shares outstanding). Buy Or Sell Opportunity • Dec 24
Now 28% overvalued The stock has been flat over the last 90 days, currently trading at CA$0.045. The fair value is estimated to be CA$0.035, however this is not to be taken as a sell recommendation but rather should be used as a guide only. Buy Or Sell Opportunity • Nov 27
Now 46% overvalued Over the last 90 days, the stock has fallen 17% to CA$0.05. The fair value is estimated to be CA$0.034, however this is not to be taken as a sell recommendation but rather should be used as a guide only. Buy Or Sell Opportunity • Oct 30
Now 31% overvalued Over the last 90 days, the stock has fallen 25% to CA$0.045. The fair value is estimated to be CA$0.034, however this is not to be taken as a sell recommendation but rather should be used as a guide only. Buy Or Sell Opportunity • Oct 04
Now 31% overvalued Over the last 90 days, the stock has fallen 31% to CA$0.045. The fair value is estimated to be CA$0.034, however this is not to be taken as a sell recommendation but rather should be used as a guide only. New Risk • Apr 15
New minor risk - Share price stability The company's share price has been volatile over the past 3 months. It is more volatile than 75% of Canadian stocks, typically moving 13% a week. This is considered a minor risk. Share price volatility indicates the stock is highly sensitive to market conditions or economic conditions rather than being sensitive to its own business performance, which may also be inconsistent. It also increases the risk of potential losses in the short term as the stock tends to have larger drops in price more frequently than other stocks. Currently, the following risks have been identified for the company: Major Risks Less than 1 year of cash runway based on free cash flow trend (-CA$3.4m free cash flow). Earnings have declined by 46% per year over the past 5 years. Revenue is less than US$1m. Market cap is less than US$10m (CA$11.1m market cap, or US$8.03m). Minor Risk Share price has been volatile over the past 3 months (13% average weekly change). New Risk • Jan 30
New major risk - Market cap size The company's market capitalization is less than US$10m. Market cap: CA$13.3m (US$9.89m) This is considered a major risk. Companies with a small market capitalization are most likely businesses that have not yet released a product to market or are simply a very small company without a wide reach. Either way, risk is elevated with these companies because there is a chance the product may not come to fruition or the company's addressable market or demand may not be as large as expected. In addition, if the company's size is the main factor, it is less likely to have many investors and analysts following it and scrutinizing its performance and outlook. Currently, the following risks have been identified for the company: Major Risks Less than 1 year of cash runway based on free cash flow trend (-CA$3.4m free cash flow). Earnings have declined by 45% per year over the past 5 years. Shareholders have been substantially diluted in the past year (109% increase in shares outstanding). Revenue is less than US$1m. Market cap is less than US$10m (CA$13.3m market cap, or US$9.89m). Minor Risk Share price has been volatile over the past 3 months (14% average weekly change). New Risk • Oct 30
New major risk - Market cap size The company's market capitalization is less than US$10m. Market cap: CA$15.2m (US$11.0m) This is considered a major risk. Companies with a small market capitalization are most likely businesses that have not yet released a product to market or are simply a very small company without a wide reach. Either way, risk is elevated with these companies because there is a chance the product may not come to fruition or the company's addressable market or demand may not be as large as expected. In addition, if the company's size is the main factor, it is less likely to have many investors and analysts following it and scrutinizing its performance and outlook. Currently, the following risks have been identified for the company: Major Risks Less than 1 year of cash runway based on free cash flow trend (-CA$4.8m free cash flow). Share price has been highly volatile over the past 3 months (18% average weekly change). Earnings have declined by 24% per year over the past 5 years. Shareholders have been substantially diluted in the past year (113% increase in shares outstanding). Revenue is less than US$1m. Market cap is less than US$10m (CA$15.2m market cap, or US$11.0m). New Risk • Aug 02
New major risk - Financial position The company has less than a year of cash runway based on its current free cash flow trend. Free cash flow: -CA$4.8m This is considered a major risk. With less than a year's worth of cash, the company will need to raise capital or take on debt unless its cash flows improve. This would dilute existing shareholders or increase balance sheet risk. Currently, the following risks have been identified for the company: Major Risks Less than 1 year of cash runway based on free cash flow trend (-CA$4.8m free cash flow). Share price has been highly volatile over the past 3 months (18% average weekly change). Earnings have declined by 24% per year over the past 5 years. Shareholders have been substantially diluted in the past year (123% increase in shares outstanding). Revenue is less than US$1m. Minor Risk Market cap is less than US$100m (CA$33.7m market cap, or US$25.3m). Annuncio • May 25
BCM Resources Corp Provides Update on the Progress at Thompson Knolls BCM Resources Corp. provided update on the progress at Thompson Knolls (TK) greenfield Cu-Au-Ag-Mo porphyry project in southwestern Utah, USA. Phase 3 drilling at TK envisaged drilling of seven core holes. "B" reports that, to date, four drill holes have been completed. Assay results have been received for three of these drillholes (TK7, TK8, and TK9). The highlight of the assay results is a significant mineral intercept of 510 ft (155.4 m) @ 0.66% Cu, 0.12 g/t Au, and 7.4 g/t Ag in drillhole TK8, with 8 sample intervals containing values greater than 1% Cu over 80 ft (24.3 m). Summary of Drillhole TK8: TK8 was collared between TK3 and TK5 drillholes (see map BCM Resources Corp. | News). It was drilled vertically, reaching a downhole depth of 3,062.5 ft (933.45 m). The hole was designed to test the north-western flank of the TK magnetic anomaly and continuity of mineralization from TK3. At 1,915 ft (583.7 m) depth, TK8 intercepted mineralized diopside-marble skarn oxidized to a 2,040 ft (621.8 m) depth and then encountered primary magnetite-chalcopyrite mineralization that was documented for an extended interval from 2,040 ft (621.8 m) to 3,050 ft (929.6 m), a total of 1,010 ft (307.8 m). Sampling returned assay results averaging 0.40% Cu, 0.08 g/t Au and 4.92 g/t Ag, including a more intensely mineralized interval from 2,040 ft (621.8 m) to 2,550 ft (777.2 m) of total 510 ft (155.4 m) @ 0.66% Cu, 0.12 g/t Au and 7.4 g/t Ag, with 8 sample intervals containing values greater than 1% Cu over 80 ft (24.3 m). Summary of Drillhole TK7: Drillhole TK7 was drilled vertically to a depth of 1,230 ft (375 m) and located SSW of hole TK3 which was drilled vertically to a depth of 2,641 ft (805 m) and designed to test the strong part of the TK magnetic anomaly. It reached a quartz-monzonite porphyry intrusion at 1,321 ft (402.6 m) carrying weak quartz-chalcopyrite mineralization in numerous thin quartz pyrite-chalcopyrite veinlets and rare quartz stockworks. Typical alteration developed includes: i) weak potassic (biotite-K-feldspar); ii) propylitic (chlorite) with magnetite, and; iii) patchy argillic alteration. Copper grades in the sampled interval from 2,060 ft (627.9 m) to the bottom returned low copper metal values below 0.1%. Summary of Drillhole TK9: Drillhole TK9 located ESE of TK6 1,923 ft (586 m) away was drilled to a depth of 2,322.5 ft (707.9 m) and designed to test the northern edge of the TK magnetic anomaly in carbonate rocks. It encountered strongly silicified marbleized dolomites and limestones with some patchy quartz-magnetite-hematite breccia mineralization. Assay results were low copper grades below 0.1% Cu. Summary of Drillhole TK10: This drill hole was located ESE of TK9 1,585 ft (483 m) away to test the northern edge of the TK anomaly similarly to TK9. It was drilled vertically to a depth of 3,633 ft (1.107 m) in dolomitized marbles with no visual mineralization. The Company is currently actively advancing hole TK14 which is strategically located between holes TK3a and TK6. Hole TK14 is designed to test the north-western extension of the TK magnetic anomaly both in carbonate rocks and underlying quartz-monzonite intrusion. Mineralized skarn lithologies have been intersected in TK14 so far and drilling is proceeding. TK is located approximately 210 km southwest of Rio Tinto's giant Bingham Canyon porphyry copper-molybdenum-gold mine and smelter complex near Salt Lake City, Utah. Annuncio • May 13
BCM Resources Corporation announced that it has received CAD 2.718368 million in funding On May 11, 2023, BCM Resources Corporation closed the transaction. The company has issued 292,294 units for gross proceeds of CAD 73,073.5. The company has issued 10,873,468 units for gross proceeds of CAD 2,718,367 in the transaction. All the securities issued are subject to a four-month hold period from the date of issue. No finders' fee has been paid with respect to the transaction. The transaction is subject to final approval from the TSX Venture Exchange. Annuncio • Feb 09
BCM Resources Corp Updates on Phase 3 Drilling Program At the TK Greenfield Cu-Au Porphyry Project, Utah, USA BCM Resources Corp. updated its shareholders about the advances in its exploration drilling program at Thompson Knolls (TK) greenfield Cu-Au-Ag-Mo porphyry system in southwestern Utah, USA. Diamond drilling is successfully advancing drill testing of the deep porphyry and skarn targets previously described in the Company press release dated October 12, 2022. The greenfield TK Cu-Au-Ag-Mo porphyry project is located approximately 210 km southwest of Rio Tinto's giant Bingham Canyon porphyry copper-molybdenum-gold mine and smelter complex near Salt Lake City, Utah. It is accessed by a highway and then by a network of gravel roads. TK8 drill hole (completed, but failed to reach target depth). This hole was vertical (90 degrees) and located on the mineralized trend from drill holes TK1, TK3a & TK5. Hole TK8 had a projected target depth of 4,000 ft (1,220m). The drill hole crossed a 1,484 ft-thick (452 m) post-mineral fanglomerate cover and then encountered a package of limestones, mudstones, and sandstones. Significantly, the limestones contain a well-developed diopside-marble skarn. The upper parts of this skarn are oxidized, then farther into the skarn drilling encountered a very intense sulfide-rich magnetite breccia in skarns stretching for over a 1,021.5 ft (313 m) interval. Locally, sulfide mineralization consists of pyrite (avg 10%)-pyrrhotite (avg 8%)-chalcopyrite (avg 5%) and is developed as clots/patches within massive magnetite breccias and in halos as disseminated mineralization. Unfortunately, after encountering a fault zone at depth of 3,021.5 ft (921 m) drillers lost the hole. The bottom of the hole was still in good skarn mineralization with its extension remaining open in all directions. The contact between the skarn and porphyry intrusion has not been tested and remains a compelling target. TK7 drill hole was also drilled vertically (90 degrees) through a 1,250 ft thick (381 m) post-mineral cover unit of semi-consolidated fanglomerates with numerous sandy horizons, which presented a significant drilling challenge. Below the fanglomerates, drilling intersected mineralized quartz- monzonite porphyry (QMP) intrusion until the end of the hole. The QMP unit has three alteration types: i) illite-chlorite (propylitic); ii) quartz-sericite-pyritic (QSP) alteration (phyllic), and; iii) patchy biotite-K feldspar (potassic). Mineralization is documented as poorly mineralized quartz-pyrite- chalcopyrite stockwork veining and disseminated mineralization. Drilling of TK7 was stopped in a fault zone at depth of 2,641 ft (804.98 m). Drill core with mineralization is being cut by a diamond saw and sample preparation for the mineralized intervals is underway. Assaying for standard ICP and gold fire assay package will be done at ALS Global. The Company is planning to expand the scope of its exploration program at TK in 2023. To accommodate this larger program, the company have prepared a Plan of Operation (PoO) and submitted the proposal to Utah BLM and the Utah Division of Oil, Gas, and Mining for their review and approval. The proposal was accepted by both the Utah government and BLM agencies. Approval of the Plan will allow the Company to significantly increase exploration drilling testing of the northern and southern portions of the TK property. Annuncio • Nov 17
BCM Resources Corporation, Annual General Meeting, Dec 29, 2022 BCM Resources Corporation, Annual General Meeting, Dec 29, 2022. Board Change • Nov 16
Less than half of directors are independent Following the recent departure of a director, there is only 1 independent director on the board. The company's board is composed of: 1 independent director. 5 non-independent directors. Independent Director Darcy McKeown was the last independent director to join the board, commencing their role in 2017. The company's minority of independent directors is a risk according to the Simply Wall St Risk Model. Annuncio • Oct 13
BCM Resources Corp Announces Start of Phase 3 Drilling At TK Greenfield Cu-Au Porphyry Project, Utah, USA BCM Resources Corp. informed its shareholders that the exploration drilling program at its Thompson Knolls (TK) greenfield Cu-Au-Ag-Mo porphyry system in southwestern Utah, USA has resumed. The Company has received permits from the BLM to drill an additional 7 diamond drill holes for 24,200 feet (7,400 meters) as highlighted in the news release of September 8, 2022. TK7 drill hole is in progress: Drilling is currently underway in hole TK7, that is designed to test the center of the highest magnetic anomaly. The company also planning to test the extension of the mineralization in the western flank previously intercepted in drill holes TK3a and TK5, however, drilling at the latter failed to reach the mineralized intrusion due to drilling complications. The company anticipates that drill hole TK8 would confirm the extension of the mineralization in the intrusion in the western direction. Drill holes TK9, TK10, and TK11 are designed to test the potential for mineralized skarns along the northern edge of the TK intrusion. Drill holes TK12 and TK13 will test the eastern flank of the mineralized intrusion. The greenfield TK Cu-Au-Ag-Mo porphyry project is located approximately 210 km southwest of Rio Tinto's giant Bingham Canyon porphyry copper-molybdenum-gold mine and smelter complex near Salt Lake City, Utah. It is accessed by a highway and then by a network of gravel roads. Annuncio • Oct 05
BCM Resources Corporation Initiates Drone-Supported, Detailed Magnetic Survey at TK Greenfield Cu-Au Porphyry Project, Utah, USA BCM Resources Corporation initiated an airborne drone-supported magnetic survey at its Thompson Knolls (TK) greenfield Cu-Au-Ag-Mo project in southwestern Utah, USA. Following the expansion of the TK land position via claim staking (see press release of March 3, 2022). Last week, the Company began the drone-supported aeromagnetic survey over the newly acquired claims. The detailed survey (line spacing of 100 m) is anticipated to better delineate existing magnetic targets for focused drilling of the mineralized TK intrusion extensions and potentially generate additional magnetic targets in the area. The survey is expected to be completed by October 8, 2022. Newly generated geophysical data will be merged with the existing project magnetic data and then processed to produce a 3D model of the TK mineralized porphyry system. The company expects that this magnetic survey will help the Company's efforts to identify the location of the potassic core with associated high-grade copper mineralization. Annuncio • Sep 17
BCM Resources Corp (TSXV: B) entered into a letter of interest to acquire Inland Explorations Ltd. for CAD 10.3 million. BCM Resources Corp (TSXV: B) entered into a letter of interest to acquire Inland Explorations Ltd. for CAD 10.3 million on September 15, 2022. BCM shares provided to Inland shareholders is CAD10.3 million at a price of CAD0.125 per share with exchange ratio of 3.1137. BCM (51%) / Inland (49%) ownership interests in TK. Transaction is subject to a number of conditions, including: (i) completion of successful due diligence by the parties, (ii) execution of a definitive agreement between the Company and Inland; (iii) TSXV approval iv) shareholder approvals. Agentis Capital Mining Partners is acting as a financial advisor to BCM Resources Corp. Annuncio • Sep 10
BCM Resources Corporation Announces Phase 3 Exploration Plans, TK Cu-Au Porphyry Project, Utah, USA BCM Resources Corp. informed shareholders on the details of its Phase 3 exploration drilling planned at its Thompson Knolls (TK) greenfield Cu-Au-Ag-Mo project in the southwestern Utah, USA. It is expected that Phase 3 drilling at TK will begin in October. The company has received permits from the BLM to drill additional 7 diamond drill holes for 24,200 feet (~7.4 km) with the proposed drill hole locations. TK Phase 3 Program Design: Phase 3 drilling program will be directed at vectoring in towards a potential Cu-rich core and testing several targets from the western to the eastern flank of the project as follows: TK8 will be drilled to a depth of 4000 ft (~1220 m) and is designed to reach the mineralized intrusion beneath the mineralized skarn previously intercepted in TK5. It will be an 800 ft (~245 m) step out to the west from TK3A. TK7 will be directed at testing the most intensively magnetic part of the TK porphyry intrusion and will have a projected length of 3000 ft (~915 m). TK7 is a 1457 ft (~444 m) step-out south-southeast from TK3A. Holes TK9, TK10 & TK11 are positioned along the northern edge of the porphyry intrusion to test the potential for intensely mineralized skarns along the northern contract of the intrusion with the host carbonate rocks. TK9 will be drilled to 4000 ft (~1220 m) whereas TK10 and TK11 will be drilled to 3600 ft (~1100 m). TK12 and TK13 will test the eastern flank of the TK porphyry intrusion and each hole will be drilled down to 3000 ft (~915 m). The greenfield TK Cu-Au-Ag-Mo porphyry project is located approximately 210 km southwest of Rio Tinto's giant Bingham Canyon porphyry copper-molybdenum-gold mine and smelter complex near Salt Lake City, Utah. It is accessed by a highway and then by a network of gravel roads. Annuncio • Sep 07
BCM Resources Corporation Announces Drilling and Exploration Update, Thompson Knolls Project in Utah BCM Resources Corp. announced that the Company completed Phase 2 drilling exploration at its Thompson Knolls (TK) greenfield Cu-Au-Ag-Mo project in the southwestern part of Utah, USA. Phase 3 drilling at TK is scheduled to begin in the forthcoming fall season. "B" also reports the results of age dating on the porphyry intrusive bodies and molybdenum mineralization discovered to date at TK. Drilling Results: The Company completed drilling 6 additional core holes at TK in 2021 and 2022. The initial discovery hole TK1 was drilled in 2018. The assay and geochemical results for the new drillholes are reported below. A new, high-grade Cu-Au-Ag-Mo body of skarn was discovered in hole TK6, the "Eureka Skarn." The associated intrusive will be searched for in upcoming Phase 3 drilling program. Summary of Drillhole TK6. TK6 was collared 950m NW of TK1, away from the main body of highly magnetic biotitic quartz-monzonite porphyry (QMP). This is the deepest drillhole on the property so far and was stopped at 3,940 ft. At the depth of 1668 ft, it intercepted the mineralized "Eureka Skarn". From 2960 to 3930 ft depth, the drillhole went through a strongly mineralized magnetite-pyrrhotite-chalcopyrite skarn with scattered molybdenite. Cu-Mo-Au-Ag mineralization in the 970 ft interval graded an average of 0.03 g/t Au, 3 g/t Ag, 0.163% Cu, and 0.0093% Mo, including the 230 ft interval from 3220 to 3450 ft where the skarn mineralization assayed 0.06 g/t Au. 5.7 g/t Ag, 0.41% Cu and 0.013% Mo. The grade 10 ft interval from 3400-3410 ft assayed over 1% Cu and 0.186 g/t Au, 16.6 g/t Ag, and 58 ppm Mo. Summary of Drillhole TK5: Drillhole TK5 was collared 990m to the NW of TK1. This hole went through a very thick cover of post-mineral lithified fanglomerates 1595 ft (486.2 m) thick. Underneath, it intercepted a mineralized limestone-dolostone skarn that carried 0.078% Cu and 0.006% Mo with minor gold in the 110 ft (33 m) interval starting at 2670 ft (905 m). At depth of 2780 ft (847 m), the drillhole was terminated still in mineralized skarn due to a fault zone causing drilling complications. Summary of Drillhole TK3: TK3 was situated at 570 m WNW of hole TK1 and was drilled at 70 degrees angle to the SW. It presented a big drilling challenge and consequently was lost at 2034 ft (620 m). It crossed from lithified fanglomerate into a skarnified dolomite at 1452 ft (442.6 m), and into QMP at 1844 ft (562 m). Both QMP and skarn are mineralized with copper in QMP at 0.03% in the upper block and 0.02% in the QMP below. In a shorter interval, a 25 ft (7.6 m) section of skarn yielded 0.06% Cu and 0.01% Mo, whereas a 30 ft (9.1 m) interval in the lower block from 1950 ft (594.4 m) to 1980 ft (603.5 m) carried predominantly molybdenum mineralization with Cu at 0.02% and Mo at 0.084%. The hole was stopped in mineralization due to a drilling failure. Summary of Drillhole TK3a: Drillhole was collared 36 m NNE of TK3, and went through a lithified fanglomerate cover of 1430 ft (435.9 m) thick, where it intercepted a mineralized quartz-monzonite porphyry intrusion with occasional blocks of skarnified dolomites from 1659 ft (505.7 m) to 1867 ft (569.1 m). From 1428 ft (435.3 m) to 2870 ft (874.8 m), the 1442 ft-long (440 m) interval carried weak copper-molybdenum mineralization, with 0.02% Cu, and 0.008% Mo. Molybdenum increased with depth from 2260 ft (688.8 m) to 3652 ft (1113.1 m). At 1392 ft (428 m) it averaged 0.018% Mo and 0.011% Cu. Summary of Drillhole TK2: This drill hole was a near duplicate of TK1, 29 m to the southeast of TK1, and was drilled in mid-2021. Drilling in TK2 went down to 2000 ft (609.6 m). At depth of 645 ft (196.6 m), it intercepted the biotite-quartz-monzonite porphyry intrusion with argillic (phyllic) alteration and weak sulfide mineralization (predominantly pyrite) in the interval of 1614 ft (491.9 m) to 2000 ft (609.6 m). In the upper part from 645 ft (196.6 m) to 1205 ft (367.3 m) the mineralization is oxidized. Assay results indicate the anomalous presence of gold and the weak presence of copper in the 234 ft-long intervals (71 m) from 1434 to 1668 ft at 0.01 g/t Au and 0.02% Cu. In the shorter distance from 1434 to 1470 ft (36 ft total) yielding 0.07% Cu and 0.006% Mo. Summary of Drillhole TK4: TK-4 was collared 146 m SSE of hole TK1 and was drilled northward at 80 degree angle. And completed to a depth of 1445 ft (440 m), where drilling problems forced termination of the hole. No significant visual copper mineralization was observed hence no assay samples were taken. Annuncio • Jun 10
BCM Resources Corporation Resources Successfully Completes Phase Ii Drilling At Thompson Knolls Project in Utah, USA BCM Resources Corp. is informing its shareholders that the Company successfully completed the (6) holes (15,850ft or 4,831m) in its Phase II exploration drilling at its Thompson Knolls (TK) Cu-Au-Mo porphyry project in the southwestern part of Utah, USA. TK is located approximately 225 km southwest of Rio Tinto's giant Bingham Canyon porphyry Cu-Mo- Au mine and smelter complex near Salt Lake City, Utah. The overall Phase I & II programs have involved seven (7) drill holes for 16,968ft (5,172m). Drillholes TK3a and TK6 are the deepest holes drilled to date, extending to 3,653ft (1,113m) and 3,930ft (1,198m) depths respectively and having the most extensive mineralization documented. TK6 assay results are pending and will be reported with all analytical results for Phase II drilling. Hole TK3a intercepted Cu-Mo mineralization, stretching for 1,853ft (565m) as part of an intrusive stockwork and veinlets porphyry system within the zone of sericitic alteration in quartz-monzonite porphyry intrusion with local zones of potassic alteration. Hole TK6 discovered a significant extent of skarn mineralization stretching for over 946ft (288m) with Mo-Au-Cu mineralization (drill hole was stopped in the skarn due to equipment failure). Visual chalcopyrite mineralization in the skarn appears to be directly correlated with the amount of magnetite. Annuncio • May 03
BCM Resources Corporation announced that it has received $2.2 million in funding On May 2, 2022, BCM Resources Corporation closed the transaction. The securities issued are subject a hold period ending August 29, 2022. Finder’s fees of up to 5% cash and 5% finder’s one-year warrants were paid on some subscriptions. The transaction is subject to approval by the TSX Venture Exchange. Board Change • Apr 27
Less than half of directors are independent Following the recent departure of a director, there is only 1 independent director on the board. The company's board is composed of: 1 independent director. 5 non-independent directors. Independent Director Darcy McKeown was the last independent director to join the board, commencing their role in 2017. The company's minority of independent directors is a risk according to the Simply Wall St Risk Model. Board Change • Apr 10
Less than half of directors are independent Following the recent departure of a director, there is only 1 independent director on the board. The company's board is composed of: 1 independent director. 5 non-independent directors. Independent Director Darcy McKeown was the last independent director to join the board, commencing their role in 2017. The company's minority of independent directors is a risk according to the Simply Wall St Risk Model. Annuncio • Apr 03
BCM Resources Corporation announced that it expects to receive $2.2 million in funding BCM Resources Corporation announced a non-brokered private placement of up to 10,000,000 units at a price of CAD 0.22 per unit for gross proceeds of up to CAD 2,200,000 on April 1, 2022. Each unit is composed of one common share and one common share purchase warrant of the company. Each warrant entitles the holder to purchase one additional common share of the company at an exercise price of CAD 0.33 per share for a period of one year from the date of issuance. The transaction may include participation from certain insiders of the company. The company will pay finders' fees of 5% in cash and 5% in warrants. The transaction is subject to the approval of TSX Venture Exchange. All securities to be issued in the transaction will be subject to a four-month hold period. Annuncio • Mar 05
BCM Resources Corp Provides Diamond Drill Program Update BCM Resources Corp. provided diamond drill program update. BCM's drilling contractor Falcon Drilling has now completed DDH TK3a. The drilling was stopped at 1,114m depth, still in quartz-molybdenite mineralization continuing deeper below this level. Core samples from the 544m mineralized interval of DDH TK3a were submitted to the ALS lab in Reno, Nevada for processing and will be shipped to Vancouver for assaying. FD has moved the drill rig to a new pad, DDH TK5. This hole location is in the northwestern flank of the TK project ~415m from DDH TK3a. The drillers started sinking casing for DDH TK5 and are currently in progress advancing this hole through the fanglomerate cover. Annuncio • Feb 18
BCM Resources Corp Receives DOGM Approval for 3 New Diamond Drill Holes BCM Resources Corp. announced that the company has received approval from the Utah Department of Oil, Gas, and Mining (DOGM) for an additional 3 Diamond Drill Holes. These holes are in the Northwestern flank of the project. Diamond drillhole (DDH) TK5 is ~ 500 metres northwest of TK3a, DDH TK13 is ~500 metres North (and slightly West) of TK3a, and DDH TK14 is ~700 metres South (and slightly East) of TK3a. TK is located approximately 225 Kms southwest of Rio Tinto's giant Bingham Canyon porphyry copper-molybdenum-gold mine and smelter complex near Salt Lake City, Utah. Annuncio • Feb 16
BCM Resources Corporation Announces New Discovery of Porphyry Cu-Mo Mineralization Drilled at Thompson Knolls, Utah, USA BCM Resources Corporation announced that Diamond Drilling intercepted new porphyry Cu-Mo mineralization at the Thompson Knolls (TK) project in southwestern Utah. Hole TK3a has documented blebby chalcopyrite-molybdenite mineralization at a 666m downhole depth. At 833m, TK3a has encountered intensely silicified qmp with sub-vertical massive pyrite- chalcopyrite D-veinlets. Hole TK3a is still in progress, assays are pending. Drilling is continuing at the Thompson Knolls (TK) project, Utah, USA with hole TK3a in progress. TK3a is being drilled vertically a projected depth of 1,097m. Here is a breakdown of what the hole has encountered: After cutting a fanglomerate to 429m, drilling encountered an intensely fractured & oxidized, altered, quartz-monzonite porphyry (qmp) intrusive (textures destroyed, feldspars altered to clay). Local (rare) thin quartz-molybdenite B-veinlets are found in the intrusive fragments. At 507m downhole, a dolomite skarn was intersected with continuous intense oxidation of numerous randomly oriented (chlorite and iron oxide) veins and veinlets. From 573m depth a qmp intrusive (no significant oxidation) with obvious pyrite/chalcopyrite/molybdenite veinlets was encountered. At 666m blebby chalcopyrite mineralization in quartz-molybdenite veinlets was documented. The veinlets are dominantly subvertical - very few are captured by vertical drilling. At 725m, drilling started intersecting a mineralized stock-work with numerous veinlets carrying molybdenite-chalcopyrite mineralization. At 748 m potassic alteration increases and K feldspar forms salvages in quartz veinlets. At 857m the drillhole encountered intensely silicified qmp with sub-vertical massive pyrite- chalcopyrite D-veinlets. Annuncio • Jan 12
BCM Resources Announces Diamond Drilling Resumed at Thompson Knolls Cu-Au-Mo Project in Utah BCM Resources Corporation announced that Diamond Drilling has resumed at the Thompson Knolls ("TK") porphyry copper-gold-molybdenum project in southwestern Utah. The Company's new drilling contractor Falcon Drilling, the "Contractor" has started drilling TK3a in the proximity of the previously drilled TK3, which reached copper-molybdenum mineralization in the interval between 452 m and 558 m. The drill was stopped in mineralization due to complications experienced by the previous drillers. The mineralization intercepted in this drill hole has a distinctive porphyry style with dominant copper mineralization within the marbleized host rock dolomites and mineralized stockwork hosted by underlying quartz-monzonite porphyry. The northwestern flank of the TK project has coincident AMT and IP anomaly which will be tested by drillhole TK3a to the currently permitted depth of 3,600 feet (1,097 meters). Annuncio • Sep 23
BCM Resources Corporation announced that it has received CAD 1.1 million in funding On September 21, 2021, BCM Resources Corporation closed the transaction. All securities to be issued in the transaction will be subject to a four-month hold period expiring on January 21, 2022. Annuncio • Aug 31
BCM Resources Corporation announced that it expects to receive CAD 1.1 million in funding BCM Resources Corporation announced a non-brokered private placement of up to 10,000,000 units at a price of CAD 0.11 per unit for gross proceeds of up to CAD 1,100,000 on August 30, 2021. Each unit is composed of one common share and one common share purchase warrant of the company. Each warrant entitles the holder to purchase one additional common share of the company at an exercise price of CAD 0.16 per share for a period of two years from the date of issuance. The transaction may include participation from certain insiders of the company. The company will pay finders' fees of 5% in cash and 5% in warrants. The transaction is subject to the approval of TSX Venture Exchange. All securities to be issued in the transaction will be subject to a four-month hold period. Annuncio • Apr 03
BCM Resources Corporation announced that it has received CAD 0.715 million in funding from Crescat Capital and other investors On April 1, 2021, BCM Resources Corporation (TSXV:B) closed the transaction. All the securities issuable are be subject to a four-month hold period to July 29, 2021. The transaction included participation from Crescat Capital and its affiliates. TSX Venture Exchange has accepted for filing documentation with respect to the non-brokered private placement. The transaction included participation from 20 placees and insider participation from Darcy McKeown, Director, President & Chief Executive Officer of the company for 445,000 shares. The company paid finders' fees of CAD 6,925 and B 125,900 warrants to Haywood Securities Inc. that are exercisable at 10 cents per share for a 24-month period and 2,475.00 and 45,000 B warrants to Canaccord Genuity Corp. that are exercisable at 10 cents per share for a 24-month period. Annuncio • Jan 19
BCM Resources Corporation announced that it expects to receive CAD 0.65 million in funding BCM Resources Corporation (TSXV:B) announced a non-brokered private placement of up to 13,000,000 units at a price of CAD 0.05 per unit for gross proceeds of up to CAD 650,000 on January 17, 2021. Each unit is composed of one common share and one share purchase warrant. Each whole warrant entitles the holder to purchase one common share at a price of CAD 0.10 per share for two years from the date of issue. Certain insiders may participate in the transaction. The company will pay finders' fees of 5% in cash and 5% in finders' warrants. The transaction is subject to approval by the TSX Venture Exchange. All the securities issuable will be subject to a four-month hold period from the date of issue. Annuncio • Sep 09
BCM Resources Corporation announced that it expects to receive CAD 0.95 million in funding BCM Resources Corporation (TSXV:B) announced a non-brokered private placement of 11,19,000,000 units at a price of CAD 0.05 per unit for a gross proceeds of CAD 950,000 on September 8, 2020. The transaction will includes participation from the insiders of the company. Each unit consists of one common share and one common share purchase warrant. Each warrant entitles the holder to purchase one additional common share at a price of CAD 0.10 per share for a period of 12 months from the date of closing. The company will pay finder’s fee equal to 5% in cash and 5% finder’s warrants of the proceeds raised in the transaction. The securities issued are subject to a hold period of four months from the date of issuance. The transaction is subject to TSX Venture Exchange approval. All securities issued in the transaction are subject to a statutory hold period of four months.