Ankündigung • Jun 19
Vishay Intertechnology, Inc. Releases 1.5 kV Automotive and Commercial IHDV Inductors in Compact Sizes Vishay Intertechnology, Inc. introduced the first four devices in its new IHDV line of high voltage power inductors for next-generation automotive, energy, and industrial systems. Engineered for designs requiring 1.5 kV isolation voltages, and available in compact 0808 (20 mm x 14 mm x 14 mm) and 1008 (25 mm x 20 mm x 23 mm) case sizes. The Automotive Grade IHDV-0808AC-3A and IHDV-1008BB-3A and commercial IHDV-0808AC-30 and IHDV-1008BB-30 combine continuous high temperature operation to 180 °C with soft saturation performance. To extend the voltage capability beyond the 350 V typical of existing inductors, the Vishay Dale devices released incorporate a PET plastic coilform insulator that supports 1.5 kV isolation voltage. Enabled by a powdered iron alloy core, their soft saturation behavior allows inductance to remain stable under load for effective ripple current regulation, while withstanding transient in-rush currents up to five times their heat rating current. For high frequency filtering, the IHDV devices deliver significantly higher impedance than similarly sized iron composite inductors. The 0808 models provide impedance of 1 kO at a peak frequency of 80 MHz, while the 1008 models deliver 2.8 kO at 25 MHz — three times the impedance of similar inductors at four times the frequency. Typical applications for the devices include on-board chargers, battery-charging circuits, power factor correction (PFC), and high voltage DC battery filtering. The IHDV-0808AC-3A and IHDV-0808AC-30 offer a compact, surface-mount footprint roughly one-third the volume of the 1008 model, while the advantage with the larger IHDV-1008BB-3A and IHDV-1008BB-30 is the through-hole terminations that deliver maximum mechanical strength in rugged environments. RoHS-compliant, halogen-free, and Vishay Green, all four devices incorporate additional support pins to increase resistance to shock and vibration. In addition, the automotive IHDV-0808AC-3A and IHDV-1008BB-3A are AEC-Q200 qualified. Part number: IHDV-0808AC-3A, IHDV-0808AC-30, IHDV-1008BB-3A, IHDV-1008BB-30. Dimensions (mm): 20 x 14 x 14, 25 x 20 x 23. Inductance (µH): 1.9, 10. DCR typ. (mO): 1.3, 2.7. DCR max. (mO): 1.5, 2.9. Heat rating current typ. (A): 30.0, 30.0. Saturation current typ. (A): 110, 68. SRF typ. (MHz): 83, 22. AEC-Q200: Yes, No, Yes, No. DC current (A) that will cause an approximate ?T of 40 °C. DC current (A) that will cause L0 to drop approximately 30%. Samples and production quantities of the IHDV inductors are available now, with lead times of 12 weeks. Buy Or Sell Opportunity • Jun 18
Now 24% overvalued after recent price rise Over the last 90 days, the stock has risen 290% to US$64.90. The fair value is estimated to be US$52.22, however this is not to be taken as a sell recommendation but rather should be used as a guide only. Revenue has declined by 5.9% over the last 3 years. Meanwhile, the company has become profitable. Revenue is forecast to grow by 16% in a year. Earnings are forecast to grow by 6,045% in the next year. Ankündigung • Jun 17
Vishay Intertechnology Releases New 1 A, 2 A, and 3 A Gen 7 1200 V Fred Pt Hyperfast Rectifiers in SMPC HV Package Vishay Intertechnology, Inc. expanded its Gen 7 platform of 1200 V FRED Pt Hyperfast rectifiers with six new devices in the eSMP series SMPC HV package. Optimized for industrial, automotive, and energy applications, the 1 A, 2 A, and 3 A rectifiers not only offer the best trade-off between reverse recovery charge (Qrr) and forward voltage drop for devices in their class, but also provide the lowest junction capacitance and recovery time. The Vishay Semiconductors rectifiers released today include the VS-E7SX0112-M3V, VS-E7SX0212-M3V, and VS-E7SX0312-M3V, and AEC-Q101 qualified VS-E7SX0112HM3V, VS-E7SX0212HM3V, and VS-E7SX0312HM3V. To reduce switching losses and increase efficiency, the devices combine a fast recovery time of 50 ns with Qrr down to 105 nC typical, forward voltage drop down to 1.45 V, and junction capacitance down to 7.25 pF. The robust rectifiers offer non-repetitive peak surge current up to 70 A in a compact package measuring 4.3 mm x 6.5 mm with a low 1.1 mm profile, which is footprint-compatible with the TO-277A. Combined with a minimum 5.4 mm creepage distance and molding compound with a comparative tracking index (CTI) = 600 (Material Group I), the devices reduce component counts and lower BOM costs based on IEC 60664-1 requirements for high voltage applications. The VS-E7SX0112-M3V, VS-E7SX0212-M3V, VS-E7SX0312-M3V, VS-E7SX0112HM3V, VS-E7SX0212HM3V, and VS-E7SX0312HM3V will serve as clamp, snubber, and freewheeling diodes in flyback auxiliary power supplies and high frequency rectifiers for bootstrap driver functionality, while providing desaturation protection for the latest fast switching IGBTs and high voltage Si /SiC MOSFETs. Typical applications for the devices include industrial drives and tools, on-board chargers and motors for electric vehicles (EV), energy generation and storage systems, and Cuk converters and industrial LED SEPIC circuitry. The rectifiers feature a planar structure and platinum doped lifetime control that guarantee system reliability and robustness without compromising on performance, while their optimized stored charge and low recovery current minimize switching losses and reduce power dissipation. RoHS-compliant and halogen-free, the devices feature a Moisture Sensitivity Level of 1 in accordance with J-STD-020 and offer high temperature operation to +175 °C. Live-Nachrichten • Jun 13
Vishay Intertechnology Posts Strong Q1 With Profit Return and Robust EV Market Demand Vishay Intertechnology reported Q1 2026 results that beat revenue and earnings estimates and returned the company to profitability.
Shares have risen more than 54% since the prior earnings report, with management citing strong volume, a solid book-to-bill ratio and broad demand from automotive, industrial, aerospace/defense and healthcare customers.
The company highlighted higher-growth, higher-margin segments, especially products aimed at EV and industrial markets, and issued Q2 revenue guidance above Street expectations alongside anticipated margin improvements.
This combination of estimate-beating results, positive guidance and focused product launches in EV and industrial markets indicates a company that currently has solid operating momentum and supportive end-market demand.
Investors may want to watch whether the stronger margins and order trends implied by the book-to-bill ratio hold through future quarters, since a pullback in these areas could challenge the recent share price strength. Ankündigung • Jun 12
Vishay Intertechnology Extends ILHB Series of Automotive Grade Ferrite Beads to Support Wider Range of EMC Noise Reduction Applications Vishay Intertechnology, Inc. announced an expansion of its ILHB series of Automotive Grade multilayer chip ferrite beads for high current filtering. The Vishay Dale devices now offer higher current capability, smaller case sizes, and a wider range of impedance values to meet a broader set of EMC noise reduction requirements. The ILHB series is now available in 0402, 0603, 0805, 1008, and 1206 case sizes with current handling up to 6 A and impedance values from 10 O to 2700 O. The expanded lineup allows designers to achieve higher current handling in smaller packages, while delivering two to three times the current capability for the same package size and impedance value. This expanded range of sizes, current handling, and impedance values allows the ILHB ferrite beads to be used in a wider array of EMC noise reduction applications. These include high current, high frequency, and signal-specific filtering in automotive energy distribution and management systems; industrial automation systems; home and building controls; computers and computer peripherals; consumer devices; white goods; medical instrumentation; avionics; and telecom infrastructure. To simplify device selection, the ILHB product datasheets have also been enhanced with additional design parameters that help engineers estimate bead performance across more frequencies without consulting multiple performance graphs. These parameters include impedance peak value and frequency, the frequency at which impedance drops below the nominal value, and the X- and R-frequency crossover point. The AEC-Q200 qualified devices feature a silver (Ag) inner conductor with copper (Cu), nickel (Ni), and tin (Sn) plating. The ferrite beads operate over a temperature range from -55 °C to +125 °C and are RoHS-compliant, halogen-free, and Vishay Green. Samples and production quantities of the ILHB ferrite beads are available now, with lead times of 8 to 10 weeks. Upcoming Dividend • Jun 11
Upcoming dividend of US$0.10 per share Eligible shareholders must have bought the stock before 18 June 2026. Payment date: 29 June 2026. The company is paying out more than 100% of its profits and is cash flow negative. Trailing yield: 0.7%. Lower than top quartile of American dividend payers (4.2%). In line with average of industry peers (0.8%). Live-Nachrichten • Jun 04
Vishay Intertechnology Launches New Inductors and Power Modules for Automotive and Energy Markets Vishay Intertechnology expanded its IHXL series of radial through-hole inductors with four new devices that use a new iron alloy core material targeting high-temperature operation up to +155 °C and improved electromagnetic compatibility for power conversion and electrification uses.
The company also introduced widebody Automotive Grade optocouplers aimed at electric vehicles, industrial systems and renewable energy equipment, with higher isolation and safety margins.
In a separate launch, Vishay released the VS-HOT200C080 200 A power module for 48 V traction inverters in light electric vehicles and belt-start generator systems in mild-hybrid vehicles, integrating MOSFETs, a shunt resistor, bypass capacitors and an NTC sensor in a compact FlatPAK HC0 package that is designed to save up to 15% board space and reduce conduction losses by 32% versus some competing solutions.
Taken together, these product launches show Vishay leaning into higher-complexity automotive and power components tied to vehicle electrification and energy infrastructure uses.
For investors tracking VSH, a key consideration is how these newer, higher-value products gain design wins in EV and industrial platforms relative to any revenue pressure in other parts of the portfolio. Ankündigung • Jun 04
Vishay Intertechnology Introduces 200 A Power Module for Mhevs and Levs Vishay Intertechnology, Inc. introduced a new 200 A power module designed to save space and increase efficiency in 48 V traction inverters for light electric vehicles (LEV) and belt-start generator /recuperation systems for mild-hybrid electric vehicles (MHEV). For these applications, the Vishay Semiconductors VS-HOT200C080 reduces board space requirements by up to 15% compared to standard discrete solutions. To increase efficiency, the integrated power module’s MOSFETs feature best in class on-resistance of 0.45 mO, reducing conduction losses by 32% compared to competing solutions. The device released integrates 80 V MOSFETs in a half-bridge configuration, a shunt resistor for current reading, bypass capacitors for improved switching performance, and an NTC for temperature sensing — all in an insulated 30 mm x 22.8 mm transfer-mold FlatPAK HC0 package with an electrically isolated exposed DBC substrate. The power module’s transfer-mold technology enables highly reliable performance over a wide operating temperature range from -55 °C to +175 °C, especially during power cycling — allowing the device to meet severe AQG-324 reliability requirements. The VS-HOT200C080’s HC0 package features signal pins and power tabs at different heights. This allows designers to have separate power and signal PCBs, simplifying designs and allowing for better routing. To save additional board space, the signal and power PCBs can be stacked. Samples and production quantities of the VS-HOT200C080 are available now, with lead times of 13 weeks. Buy Or Sell Opportunity • Jun 03
Now 22% overvalued after recent price rise Over the last 90 days, the stock has risen 273% to US$63.97. The fair value is estimated to be US$52.25, however this is not to be taken as a sell recommendation but rather should be used as a guide only. Revenue has declined by 5.9% over the last 3 years. Meanwhile, the company has become profitable. Revenue is forecast to grow by 16% in a year. Earnings are forecast to grow by 6,045% in the next year. Ankündigung • May 28
Vishay Intertechnology, Inc. Expands IHXL Series With Four New Radial Through-Hole Inductors Vishay Intertechnology, Inc. expanded its IHXL series of radial through-hole inductors with four new devices designed to deliver enhanced performance at a lower cost. Featuring a new iron alloy core material that improves core losses by 20% over previous-generation devices — while reducing temperature rise — the Automotive Grade IHXL1500VZ-3A and IHXL-2000VZ-3A and commercial IHXL1500VZ-31 and IHXL-2000VZ-31 provide high temperature operation to +155 °C and excellent electromagnetic compatibility (EMC) for filtering applications up to 209 A. The Vishay Dale devices released will serve as high current input filters, DC/DC converters, and DC-Link filters in battery charging systems, brushless DC motors (BLDC), and differential mode and boost power factor correction (PFC) chokes in automotive, industrial, and solar and wind power applications. Offered at a lower price point than previous-generation IHXL series devices, the inductors combine their improved core losses with higher inductance up to 10 µH, enabling increased impedance for better filtering and enhanced ripple current control in switching converters. The IHXL1500VZ-3A, IHXL1500VZ-31, IHXL-2000VZ-3A, and IHXL-2000VZ-31 feature a magnetically shielded construction with a pressed powdered iron body that contains stray flux, minimizing coupling to surrounding components and maximizing EMC compared to traditional wirewound devices with exposed internal coils. This pressed powdered iron construction also offers low internal thermal resistance — reducing hotspots and enhancing performance with active cooling — while a flat top surface simplifies mounting of external heatsinks. The inductors’ thick internal copper conductor supports a wide range of loads from 55 A to 209 A in the 1500 (38.1 mm x 38.1 mm x 21.89 mm) and 2000 (50.8 mm x 50.8 mm x 21.7 mm) case sizes. Their soft saturation core material ensures stable inductance across a wide range of load conditions — including during high transient current spikes — by avoiding hard saturation. RoHS-compliant, halogen-free, and Vishay Green, the IHXL1500VZ-3A, IHXL1500VZ-31, IHXL-2000VZ-3A, and IHXL-2000VZ-31 provide high resistance to thermal shock, moisture, and mechanical shock, and are available with custom termination styles, inductance values, current, temperature, and voltage ratings. The new IHXL series inductors are available now, with lead times of 14 weeks. Ankündigung • May 22
Vishay Intertechnology Introduces Automotive Grade Optocouplers with High Isolation Voltage Ratings and Distance Vishay Intertechnology, Inc. introduced two new Automotive Grade optocouplers with phototransistor output in a widebody package featuring a comparative tracking index (CTI) of 600. Designed to deliver signal transmission with high galvanic isolation for electric vehicles (EV) and solar inverters, the Vishay Semiconductors VOWA617A and VOWA618A provide VIORM of 1500 Vpeak, VIOWM of 1060 VRMS, and external creepage and clearance distances of = 11 mm. Offering the highest creepage distance in their class, the AEC-Q102 qualified devices released provide a = 38% higher safety margin than typical 8 mm solutions, making them ideal for grid-connected on-board chargers (OBC), DC/DC converters, and battery management system (BMS) isolation stages. Exceeding the requirements for reinforced insulation in these high voltage applications, they combine their high VIORM and VIOWM — which represent increases of 6% and 19%, respectively, over competing devices — with an isolation voltage of 5300 VRMS and VIOTM of 8000 Vpeak. The optocouplers each consist of an infrared emitting diode, which is optically coupled to a silicon planar phototransistor detector in a widebody SMD-8 package. While standard solutions typically offer a CTI of 175, the 600 CTI of the VOWA617A and VOWA618A gives them a Material Group 1 rating, the highest insulation group. In addition, their 80 V collector-emitter voltage rating allows more design flexibility. Compared to consumer-grade solutions that typically feature operating temperatures to +85 °C, the optocouplers operate over a wider -40 °C to +125 °C temperature range, with a junction temperature capability up to +145 °C. RoHS-compliant, halogen-free, and Vishay Green, the devices feature a wide current transfer ratio (CTR) range from 50% to 600% at low input currents of 5 mA for the VOWA617A and 1 mA for the VOWA618A. Samples and production quantities of the new widebody optocouplers are available, with lead times of eight weeks. Declared Dividend • May 21
First quarter dividend of US$0.10 announced Dividend of US$0.10 is the same as last year. Ex-date: 18th June 2026 Payment date: 29th June 2026 Dividend yield will be 0.9%, which is lower than the industry average of 1.4%. Sustainability & Growth Dividend is not covered by earnings (dividend approximately 23x earnings) and the company has no free cash flows available, indicating it may be using cash reserves or debt to pay the dividend. The dividend has increased by an average of 5.2% per year over the past 10 years and has been stable with no material reductions to payments, indicating a long track record of dividend growth and stability. The company's earnings per share (EPS) would need to grow by 2,550% to bring the payout ratio under control. EPS is expected to grow by 117% over the next year, which means the dividend may need to be reduced to reach a sustainable payout ratio. Ankündigung • May 15
Vishay Intertechnology Introduces Four Series Of 3000 W PAR And TRANSZORB TVS In New DFN6546A Package Vishay Intertechnology, Inc. introduced four series of unidirectional and bidirectional 3000 W PAR and TRANSZORB surface-mount transient voltage suppressors (TVS) in the new DFN6546A package with wettable flanks. Providing space-saving solutions for industrial and automotive applications, the Automotive Grade T3KNxxA and T3KNxxCA series devices are AEC-Q101 qualified and offer high temperature operation to +185 °C, while the 3KDFNxxA and 3KDFNxxCA series meet the LL15i Industrial Reliability Qualification. The DFN6546A features a compact 6.5 mm x 4.6 mm footprint and an extremely low typical height of 0.88 mm, allowing the Vishay General Semiconductors TVS diodes released to make more efficient use of PCB space. At the same time, the devices’ advanced construction and die placement technology allow for a higher copper content and larger chip sizes, resulting in significant performance increases. Footprint-compatible with the SMPC (TO-277A) package, the diodes offer twice the power dissipation with a 20% lower profile. Compared to devices in the SMC (DO-214AB), they offer the same power dissipation while reducing volume by 76%. The TVS are designed to protect sensitive electronics against voltage transients induced by inductive load switching and lightning. Typical applications for the AEC-Q101 qualified T3KNxxA and T3KNxxCA PAR series include advanced driver assistance (ADAS), lidar, camera, infotainment, and sensor systems; DC/DC converters; battery management systems (BMS) and onboard chargers; electric power steering (EPS); traction inverters; central control units; and electrical motor drives. The industrial-qualified 3KDFNxxA and 3KDFNxxCA TRANSZORB series will be used in robot control boards, process /flow control instrumentation, automation systems, and generator start controllers; 60 kW energy storage systems; server power modules; consumer entertainment devices; and telecom and medical equipment. For these applications, the diodes offer excellent clamping capability with maximum clamping voltages from 16.7 V to 33.2 V for the T3KNxxA and 3KDFNxxA, and 16.7 V to 137 V for the T3KNxxCA and 3KDFNxxCA. The wettable flanks of their DFN6546A package allow for automatic optical inspection (AOI), eliminating the need for an X-ray inspection. Ideal for automated placement, the devices offer a MSL moisture sensitivity level of 1, per J-STD-020, LF maximum peak of 260 °C. The components are RoHS-compliant and halogen-free, and their matte tin-plated leads meet the JESD 201 Class 2 whisker test. Device Specification Table: Series T3KNxxA 3KDFNxxA T3KNxxCA 3KDFNxxCA Power dissipation (W) 3000 Breakdown voltage (V) 12 to 24 12 to 100 Stand-off voltage (V) 10.2 to 20.5 10.2 to 85.5 Max. clamping voltage (V) 16.7 to 33.2 16.7 to 137 TJ max. (°C) 185 175 185 175 Polarity Unidirectional Bidirectional Circuit Configuration Single AEC-Q101 Yes No Yes No. Samples and production quantities of the new 3000 W TVS in the DFN6546A package are available now, with lead times of 12 weeks. Reported Earnings • May 14
First quarter 2026 earnings: EPS and revenues exceed analyst expectations First quarter 2026 results: EPS: US$0.053 (up from US$0.03 loss in 1Q 2025). Revenue: US$839.2m (up 17% from 1Q 2025). Net income: US$7.16m (up US$11.3m from 1Q 2025). Profit margin: 0.9% (up from net loss in 1Q 2025). Revenue exceeded analyst estimates by 2.0%. Earnings per share (EPS) also surpassed analyst estimates by 71%. Revenue is forecast to grow 13% p.a. on average during the next 2 years, compared to a 13% growth forecast for the Electronic industry in the US. Over the last 3 years on average, the company's share price growth rate has exceeded its earnings growth rate by 119 percentage points per year, which is a significant difference in performance. Ankündigung • May 14
Vishay Intertechnology, Inc. Provides Earnings Guidance for the Second Quarter of 2026 Vishay Intertechnology, Inc. provided earnings guidance for the second quarter of 2026. For the period, the company expects revenues in the range of $875 million and $905 million. Ankündigung • May 08
Vishay Intertechnology, Inc. Introduces High Sensitivity Proximity Sensor in Compact Package Vishay Intertechnology, Inc. introduced a new high sensitivity proximity sensor in a compact 5.0 mm x 2.0 mm x 1.5 mm surface-mount package. Combining an IR emitter, photodiode, amplifiers, and 12-bit ADC in one device, the Vishay Semiconductors VCNL36758 delivers low power consumption and medium distance proximity detection up to 600 mm for smart home, industrial, and office applications. Compared to previous-generation solutions, the proximity sensor released offers a volume reduction of 65%. The device’s small package supports space-limited designs that require longer detection distances than typical short distance sensors, while enhancing design flexibility. The VCNL36758’s integrated IR emitter is driven by a built-in current sink with an internal selectable register, allowing engineers to optimize detection range and power consumption. The sensor provides presence detection for display activation in printers, copiers, tablets, and home appliances; collision avoidance in toys and robots; proximity sensing and lighting control in offices, corridors, and public buildings; lavatory appliance activation; and parking space availability in lots and garages. For these applications, the device features intelligent background light cancellation to ensure reliable proximity detection in the presence of ambient light sources, while its high sensitivity supports dark lens designs. A programmable interrupt function allows designers to specify high and low thresholds, reducing continuous communication with the microcontroller and lowering system power consumption. Additional power-saving capabilities are provided through an active force mode that enables one-time measurements triggered by a single command. The device’s 12-bit proximity sensor uses intelligent cancellation to eliminate crosstalk, while a smart, adjustable persistence scheme prevents false triggers to ensure accurate sensing and faster response time. The VCNL36758’s emitter wavelength peaks at 940 nm and has no visible “red-tail.” The device offers excellent temperature compensation from -40 °C to +85 °C. Offered in a lead (Pb)-free 10-pin molded package, the sensor is RoHS-compliant, halogen-free, and Vishay Green. Device Specification Table: Part number VCNL36758, Package size (mm) 5.0 x 2.0 x 1.5, Operating voltage (V) 1.7 to 3.6, I²C bus voltage (V) 1.7 to 3.6, LED pulse current (mA) 240, Operating range (mm) 600, ADC proximity resolution 12 bit. Samples and production quantities of the VCNL36758 are available now, with lead times of 16 weeks. Ankündigung • Apr 24
Vishay Intertechnology, Inc. Introduces 200 V FRED Pt Ultrafast Rectifiers In New DFN6546A Package Vishay Intertechnology, Inc. introduced 16 FRED Pt ultrafast rectifiers in the new low profile DFN6546A package with wettable flanks. Providing space-saving, high efficiency solutions for commercial, industrial, and automotive applications, the 200 V devices provide current ratings from 6 A to 15 A and are available in commercial and Automotive Grade, AEC-Q101 qualified versions. The latest package in Vishay’s Power DFN family, the DFN6546A features a compact 6.5 mm x 4.6 mm footprint and an extremely low typical height of 0.88 mm, allowing the Vishay Semiconductors rectifiers released to make more efficient use of PCB space. At the same time, the devices’ optimized copper mass design and advanced die placement technology allow for superior thermal performance that enables operation at higher current ratings. Compared to 200 V components in the SMPC (TO-277A) package with the same footprint, the rectifiers offer a 10% lower profile and a 50% higher current rating. The single and dual devices are intended for high frequency inverters, DC/DC converters, freewheeling diodes, load dump protection, clamps and snubbers, reverse and series polarity protection, and LED backlighting. Typical automotive applications will include engine control units (ECU); LED lighting systems; advanced driver assistance (ADAS), lidar, and camera systems; and 48 V boardnets, chargers, and battery management systems (BMS) in electric (EV) and hybrid electric vehicles (HEV). In addition, the rectifiers deliver high performance for industrial automation equipment and tools, energy harvesting, consumer electronics and appliances, computers, and telecom and medical equipment. For these applications, the devices offer low reverse leakage current and operate over a wide temperature range from -55 °C to +175 °C, while their low forward voltage drop of 0.75 V — combined with a fast reverse recovery time (trr) and low reverse recovery charge (Qrr) — reduces power losses to improve efficiency. The wettable flanks of their DFN6546A package allow for automatic optical inspection (AOI), eliminating the need for an X-ray inspection. Ideal for automated placement, the rectifiers offer a MSL moisture sensitivity level of 1, per J-STD-020, LF maximum peak of 260 °C. The components are RoHS-compliant and halogen-free, and their matte tin-plated leads meet the JESD 201 class 2 whisker test. Samples and production quantities of the new FRED Pt ultrafast rectifiers in the DFN6546A package are available now, with lead times of eight weeks. Ankündigung • Apr 16
Vishay Intertechnology Introduces Ihlp Low Profile High Current Inductor in 1212 Case Size Vishay Intertechnology, Inc. introduced a new IHLP low profile, high current inductor in the compact 1212 case size. For space-constrained commercial applications, the Vishay Dale IHLP1212-EZ-1Z offers comparable electrical performance to larger devices in a compact 3.0 mm x 3.0 mm footprint with three profile options: 1.2 mm, 1.5 mm, and 2.0 mm. The device released is optimized for energy storage in low profile DC/DC converters for PMICs, power line noise suppression, and filtering. Applications for the inductor include industrial drives and tools; home and building control; computers and computer peripherals; consumer entertainment and healthcare devices; telecom equipment; and medical instrumentation. Delivering high efficiency for these applications, the IHLP1212-EZ-1Z offers typical DCR from 8.6 mO to 50.4 mO and a wide range of inductance values from 0.22 µH to 3.3 µH. The inductor provides rated current to 14.3 A, operates over a temperature range of -55 °C to +125 °C, and handles high transient current spikes without saturation. Offering improved performance over ferrite-based technologies, the IHLP1212-EZ-1Z features a robust powdered iron body that completely encapsulates its windings — eliminating air gaps and magnetically shielding against crosstalk to nearby components — while its soft saturation curve provides stability across the entire operating temperature and rated current ranges. Packaged in a 100 % lead (Pb)-free shielded, composite construction that reduces buzz noise to ultra low levels, the inductor offers high resistance to thermal shock, moisture, and mechanical shock. The device is RoHS-compliant, halogen-free, and Vishay Green. Device Specification Table: Height (mm) 1.2 1.5 2.0 Inductance (µH) 0.22 to 1.0 0.22 to 1.5 0.22 to 3.3 DCR typ. (mO) 8.6 to 29.4 8.6 to 36.9 8.6 to 50.4 DCR max. (mO) 10.3 to 33.8 10.3 to 41.4 10.3 to 54.9 Heat rating current (A) (1) 6.1 to 11.1 5.5 to 11.1 4.5 to 11.1 Saturation current (A) 5.1 to 9.5 (2) /6.7 to 12.4 (3) 5.0 to 11.0 (2) /6.5 to 14.3 (3) 3.7 to 10.5 (2) /4.8 to 13.7 (3) SRF (MHz) 66 to 185 51 to 202 30 to 214 (1) DC current (A) that will cause an approximate ?T of 40 °C (2) DC current (A) that will cause L0 to drop approximately 20 % (3) DC current (A) that will cause L0 to drop approximately 30 %. Samples and production quantities of the IHLP1212-EZ-1Z are available now, with a lead time of 10 weeks. Pricing for U.S. delivery only starts at $0.463 per piece for the IHLP1212AEEZ1R0M1Z and IHLP1212BZEZ1R0M1Z, and $0.489 per piece for the IHLP1212ABEZ1R0M1Z. Ankündigung • Apr 15
Vishay Intertechnology, Inc. to Report Q1, 2026 Results on May 13, 2026 Vishay Intertechnology, Inc. announced that they will report Q1, 2026 results at 9:30 AM, US Eastern Standard Time on May 13, 2026 Ankündigung • Apr 09
Vishay Intertechnology, Inc., Annual General Meeting, May 18, 2026 Vishay Intertechnology, Inc., Annual General Meeting, May 18, 2026. Ankündigung • Apr 01
Vishay Intertechnology Introduces Automotive Grade Photovoltaic MOSFET Driver Vishay Intertechnology, Inc. introduced a new Automotive Grade photovoltaic MOSFET driver that is the first such device in the compact SMD-4 package to provide a creepage distance of 8 mm and mold compound with a comparative tracking index (CTI) of 600. Designed to increase safety and reliability in high voltage automotive applications — while simplifying designs and reducing costs — the Vishay Semiconductors VODA1275 features the industry’s fastest turn-on times and the highest open circuit voltage and short circuit current in its class. Classified as providing reinforced isolation, the device released delivers an open circuit voltage of 20 V typical, short circuit current of 20 µA, and turn-on time of 80 µs, which is three times faster than competing devices. These characteristics enable quicker and more reliable driving of MOSFETs and IGBTs in high voltage systems. In addition, the device’s working isolation voltage of 1260 Vpeak and isolation test voltage of 5300 VRMS make it ideal for 800 V+ battery systems. AEC-Q102 qualified, the VODA1275 is intended for use in pre-charge circuits, wall chargers, and battery management systems (BMS) for electric (EV) and hybrid electric (HEV) vehicles. While designers previously had to use two MOSFET drivers in series to generate the higher voltages required in these applications, the device’s high open circuit output voltage allows them to use just one, saving space and lowering costs. In addition, the driver enables the creation of custom solid-state relays to replace legacy electromechanical relays in next-generation vehicles. The optically isolated VODA1275 draws all the current required to drive its internal circuitry from an infrared emitter on the low voltage side of the isolation barrier. This construction simplifies designs and lowers costs by eliminating the need for an external power supply. The MOSFET driver is RoHS-compliant, halogen-free, and Vishay Green. Samples and production quantities of the VODA1275 are available now, with lead times of eight weeks. Ankündigung • Mar 25
Vishay Intertechnology Introduces 40 LHE Linear Position Sensor Vishay Intertechnology, Inc. introduced a new compact, ready-to-use linear position sensor designed for high accuracy performance in demanding environments. Featuring non-contacting Hall Effect technology, the Vishay Sfernice 40 LHE delivers linearity down to ± 1% (full stroke), resolution of 12 µm, and a lifespan greater than 10 million cycles — all in a space-saving 35 mm by 14.5 mm by 28 mm design. While previous-generation devices offered electrical strokes up to 10 mm, the 40 LHE extends this capability to 40 mm. Combined with its high accuracy and resolution, this makes the device ideal for servo loop motion control systems requiring small displacement monitoring, such as infrastructure integrity monitoring ("crackmeters" in bridges and buildings), digital farming (dendrometers), in-line process measurement, robotic grippers in industrial automation systems, and medical robotic grasping forceps. The sensor will also be used in throttle and pedal position sensors for e-bikes and motorcycles, railway equipment and ships, and agricultural machinery. For reliable operation in these harsh environments, the 40 LHE features IP67 sealing and withstands high frequency vibration up to 20 g and shocks up to 50 g. Integrated reverse voltage and overvoltage input protections (-10 VDC and +20 VDC, respectively) reduce costs by eliminating the need for external protection circuitry. Offering easy and flexible integration into automation systems, the device provides analog ratiometric or digital (PWM) output signals and includes versatile “2 faces” fixing holes for horizontal or vertical mounting. As a “true power on” device, the 40 LHE reports its position immediately upon power-up without requiring recalibration, re-homing, or initialization routines — even after a power loss. This further reduces costs by eliminating the need for a battery back-up. Available with a spring return option and customizable on request to meet the most demanding needs, the RoHS-compliant device operates with a supply voltage of 5 VDC ± 10% and supply current of < 16 mA typical. The recommended load resistance is 1 kO for both analog and PWM output. Samples and production quantities of the 40 LHE are available now, with lead times of 12 weeks. Ankündigung • Mar 18
Vishay Intertechnology Introduces Space-Grade Surface-Mount Common Mode Choke Vishay Intertechnology, Inc. introduced a new space-grade, surface-mount common mode choke designed to provide EMI filtering and noise suppression in demanding space, aerospace, and defense applications. The Vishay Custom Magnetics SGCM05339 is ideal for GaN and SiC switching applications, where sharp edges develop in waveforms, causing radiated emissions. The common mode choke will also be used in low profile, high current power supplies; DC/DC converters in distributed power systems; and power converters for solar panels. To withstand the harsh environments of these applications, the self-shielded device features a compact, robust nanocrystalline core and an overmolded ruggedized construction. The SGCM05339 offers high impedance at extended frequencies, supports high heat rating current capabilities of up to 14.43 A, and provides a continuous operating temperature range from -55 °C to +130 °C. Outgassing compliant per ASTM-E595, the device released is available with a wide range of screening options, including MIL-PRF-27, Grade 5, Product Level T, Temperature Class S; MIL-STD-981 Family-4, Class S; and EEE-INST-002. The SGCM05339 offers a dielectric withstand voltage of 1000 VRMS, insulation resistance of 10 GO (minimum) at 500 VDC, and can be customized by turn count, wire gauge, and more to meet specific application requirements. Device Specification Table: Part number SGCM05339 Inductance per winding 320 µH to 10 400 µH Common mode impedance (typ.) 540 O to 3600 O DC resistance per winding (max.) 0.0029 O to 0.1318 O Heat rating current (typ.)(¹) 2.02 A to 14.43 A Peak impedance frequency 2.06 Hz to 31.74 Hz Leakage (max.) 0.35 µH to 7.75 µH (1) DC current (A) through the windings in series that will cause an approximate ?T of 30 °C Samples and production quantities of the new space-grade common mode choke are available now, with lead times of 8 to 12 weeks. Ankündigung • Mar 05
Vishay Intertechnology Introduces New Tricolor Led with Luminous Intensity to 252 MCD at 5 mA for RGB Displays and Backlighting Vishay Intertechnology, Inc. introduced a new tricolor LED that provides luminous intensity to 252 mcd at 5 mA for RGB displays and backlighting. Featuring common anode and separate cathode connections for the red, true green, and blue LED chips inside its compact 1.0 mm by 1.0 mm by 0.65 mm 0404 surface-mount package, the VLMRGB1500 enables individual control of each chip, making it possible to realize every color within the color room defined by the gamut triangle area inside the CIE 1931 color space through color mixing. With its wide color range, the Vishay Semiconductors LED released is ideal for switch illumination, status indicators, and dashboard signal and symbol illumination in micro-mobility, energy storage, and industrial applications; full-color message and video display boards; keyboard illumination in computers; backlighting in consumer devices, home appliances, and telecom equipment; and a wide range of accent and decorative lighting. For these applications, the device utilizes the latest high brightness AllnGaP and InGaN technologies in a package that is 70% smaller than the PLCC-4. The VLMRGB1500… provides high reliability over a temperature range from -40 °C to +85 °C, offers a Moisture Sensitivity Level (MSL) of 3, and withstands ESD voltages up to 2 kV for red and 1 kV for blue and green in accordance with JESD22-A114-B. RoHS-compliant, halogen-free, and Vishay Green, the device is compatible with IR reflow soldering and categorized per reel for luminous intensity and color. The VLMRGB1500… is fully compatible with competing devices, enabling a direct replacement without requiring modifications to the PCB layout or driving circuitry. Device Specification Table: Color Red True green Blue Luminous intensity (mcd) @ IF = 5 mA Min. 26 122 22 Max. 54 252 46 Wavelength (nm) @ IF = 5 mA Min. 615 520 466 Max. 625 530 473 Forward voltage (V) @ IF = 5 mA Min. 1.5 2.0 2.0 Max. 2.15 3.2 3.2 Angle of half intensity (°) ± 60 Technology AllnGaP InGaN InGaN Samples and production quantities of the new tricolor LED are available now, with lead times of 17 weeks. Upcoming Dividend • Mar 05
Upcoming dividend of US$0.10 per share Eligible shareholders must have bought the stock before 12 March 2026. Payment date: 26 March 2026. The company is not currently making a profit and is not cash flow positive. Trailing yield: 2.2%. Lower than top quartile of American dividend payers (4.3%). Higher than average of industry peers (0.9%). Ankündigung • Feb 25
Vishay Intertechnology, Inc. Introduces New Series of Phototransistor Optocouplers Vishay Intertechnology, Inc. introduced a new series of phototransistor optocouplers that combine a high and linear current transfer ratio (CTR) over temperature with a low forward current of 0.5 mA. Offering high temperature operation up to +125 degC in a choice of four packages -- the DIL-4; long creepage LSOP-4; compact SOP-4; and half-pitch SSOP-4 -- the Vishay Semiconductors VOx619A series is designed to deliver accuracy and energy efficiency in industrial applications. Offering 50 % lower forward current than the previous-generation solution, the optocouplers released reduce power consumption for more energy-efficient designs in micro mobility, industrial, energy metering, telecom, and consumer applications, in which they are optimized for signal transmission with galvanic and noise isolation in DC/DC converters, programmable controllers, and power supplies. They can also be used with devices that have limited current-driving capabilities, such as microcontrollers. While CTR can drop to less than 50 % of the specified value at 25 degC for traditional optocouplers, it remains at > 75 % for the VOx619A series over its wide temperature range. This linear behavior ensures that signals are transmitted with high fidelity, which is crucial for applications requiring precise data handling. And while previous-generation solutions offered temperature ranges up to +110 degC -- and traditional couplers are often only qualified to +85 degC -- the extended temperature range of the VOx619 A series guarantees reliable performance in extreme conditions. VOx619A series devices feature an infrared emitting diode that is optically coupled to a phototransistor sensor. Optocouplers in the DIL-4 and LSOP-4 packages offer a high maximum rated isolation voltage of 5000 VRMS and creepage and clearance distances of 7 mm and 8 mm, respectively. Devices in the SOP-4 and SSOP-4 provide more compact options to save board space, while offering voltage isolation of 3750 VRMS and creepage and cleared distances of 5 mm. The optocouplers are RoHS-compliant, halogen-free, and Vishay Green. Ankündigung • Feb 18
Vishay Intertechnology, Inc. Introduces New Series of AEC-Q200 Qualified Thick Film Chip Resistors in the Ultra Compact 0201 Case Size Vishay Intertechnology, Inc. introduced a new series of AEC-Q200 qualified thick film chip resistors in the ultra compact 0201 case size. Offering a mini footprint of just 0.6 mm by 0.3 mm by 0.23 mm, the CRCW0201-AT e3 series devices provide designers with a reliable, space-saving solution for automotive, industrial, and telecommunications applications. Compared to devices in the next-larger 0402 case size, the resistors released are available at a competitive price, while reducing PCB requirements by 50 %. For designers, this supports the ongoing downsizing trend in modern electronics, while maintaining stable electrical performance and high reliability. Despite their small size, CRCW0201- AT e3 series resistors deliver a power rating of 0.05 W at +70 degC and operating voltage of 30 V. The devices operate over a temperature range from -55 degC to +155 degC and are available with a wide range of resistance values from 10 O to 1 MO (0 O jumper), with tolerances of +- 1 % and +- 5 % and TCR of +- 200 ppm/K. RoHS-compliant and halogen-free, CRCW0201-at e3 series resistors feature a protective coating designed for electrical, mechanical, and climatic protection. Suitable for automatic soldering using reflow or vapor phase, the devices' pure matte tin plating provides compatibility with lead (Pb)-free and lead-containing soldering processes. Samples and production quantities of the CRCW0201- ATe3 series are available now, with lead times of 12 weeks. Declared Dividend • Feb 16
Fourth quarter dividend of US$0.10 announced Dividend of US$0.10 is the same as last year. Ex-date: 12th March 2026 Payment date: 26th March 2026 Dividend yield will be 2.1%, which is higher than the industry average of 1.4%. Sustainability & Growth Dividend is being paid despite the company being loss-making over the last 12 months and having no free cash flows available, indicating it may be using cash reserves or debt to pay the dividend. The dividend has increased by an average of 5.2% per year over the past 10 years and has been stable with no material reductions to payments, indicating a long track record of dividend growth and stability. Ankündigung • Feb 13
Vishay Intertechnology Declares Quarterly Dividend, Payable on March 26, 2026 Vishay Intertechnology, Inc. announced that the Company’s Board of Directors declared a dividend of $0.10 per share of common stock and Class B common stock, to be paid March 26, 2026 to stockholders of record as of the close of business March 12, 2026. Ankündigung • Feb 11
Vishay Intertechnology, Inc. Introduces New Series of AEC-Q200 Qualified Standard thick Film Chip Resistors Vishay Intertechnology, Inc. introduced a new series of AEC-Q200 qualified standard thick film chip resistors. The RCA-SR e3 series combines proven sulfur resistance with long term stability in five compact case sizes for automotive, industrial, and telecommunications applications. Designed for use in sulfur-containing environments, the resistors released provide a sulfur withstand capability in accordance with ASTM B809-25, demonstrating a maximum resistance drift of 1 % after 1000 h at 60 degC. Competing devices are tested at the same temperature for shorter duration. In addition, the RCA-SR e3series ensures high stability across challenging environmental conditions, with DR/R 1 % after 1000 h of rated power at 70 degC. Available in 0201, 0402, 0603, 0805, and 1206 case sizes, the resistors provide power ratings up to 0.25 W and an operating voltage range from 30 V to 200 V. The devices offer a wide resistance range from 10 O up to 10 MO, with tolerances of +- 1 % and +- 5 % and TCR of +- 100 ppm/K and +- 200 ppm/K. RoHS-compliant and halogen-free, RCA-SR e3 Series resistors feature a protective coating designed for electrical, mechanical, and climatic protection. Suitable for automatic soldering using wave, reflow, or vapor phase, the devices' pure matte tin plating provides compatibility with lead (Pb)-free and lead-containing soldering processes. Samples and production quantities of the RCA-SR e 3 series are available now, with lead times of 12 weeks. Ankündigung • Feb 05
Vishay Intertechnology, Inc. Introduces New Commercial and Automotive Grade Power Inductors in the Compact 0806 and 1210 Case Sizes Vishay Intertechnology, Inc. introduced four new power inductors in the 2.0 mm by 1.6 mm by 1.2 mm 0806 and 3.2 mm by 2.5 mm by 1.2 mm by 1.2 mm 1210 case sizes. The commercial IHLL-0806AZ-1Z and IHLL-1210AB-1Z and Automotive Grade IHLP-0806AB-5A and IHLP-1210ABEZ-5A achieve the same performance as the next-smallest competing inductor in 11 % (1210) and 64% (0806) smaller footprints, while offering higher operating temperatures, wider range of inductance values, and lower DCR for increased efficiency. Offering inductance values from 0.24 uH to 4.70 uH and typical DCR down to 6.6 mO, the terminals of the IHLL-0806 AZ-1Z and IHll-1210ABEZ are plated on the bottom only, enabling a smaller land pattern for more compact board spacing. The terminals of the IHLP-0806 AB-5A and IHLL-12 10ABEZ-5A are plated on the bottom and sides, allowing for the formation of a solder fillet that adds mounting strength against high mechanical shock, while simplifying solder joint inspection. The AEC-Q200 qualified devices provide reliable performance up to +165 degC, which is 10 degC higher than the closest competing composite inductor, and typical DCR down to 15.0 mO. Delivering improved performance over ferrite-based technologies, all four devices feature a robust powdered iron body that completely encapsulates their windings -- eliminating air gaps and magnetically shielding against crosstalk to nearby components -- while their soft saturation curve provides stability across the entire operating temperature and rated current ranges. Packaged in a 100 % lead (Pb)-free shielded, composite construction that reduces buzz to ultra low levels, the inductors offer high resistance to thermal shock, moisture, and mechanical shock, and handle high transient current spikes without saturation. RoHS-compliant, halogen-free, and Vishay Green, the Vishay Dale devices released are designed for DC/DC converters, noise suppression, and filtering in a wide range of applications. The IHLP-0806ab-5A and IHL Pb-5A are ideal for automotive infotainment, navigation, and braking systems; ADAS, LiDAR, and sensors; and engine control units. Reported Earnings • Feb 05
Full year 2025 earnings released Full year 2025 results: Net income: (up US$31.2m from FY 2024). Over the last 3 years on average, the company's share price growth rate has exceeded its earnings growth rate by 99 percentage points per year, which is a significant difference in performance. New Risk • Feb 04
New major risk - Revenue and earnings growth Earnings have declined by 27% per year over the past 5 years. This is considered a major risk. Ultimately, shareholders want to see a good return on their investment and that generally comes from sharing in the company's profits. If profits are declining over an extended period, then in most cases the share price will decline over time unless the company can turn around its fortunes. A trend of falling earnings can be very difficult to turn around. If the company is well already established it may also be a sign the company has matured and is in decline. In addition, if the company pays dividends it will also likely need to reduce or cut them, striking a dual blow to total shareholder returns. Currently, the following risks have been identified for the company: Major Risks Dividend is not well covered by earnings and cash flows. Paying a dividend despite being loss-making. Paying a dividend despite having no free cash flows. Earnings have declined by 27% per year over the past 5 years. Ankündigung • Feb 04
Vishay Intertechnology, Inc. Provides Earnings Guidance for the First Quarter of 2026 Vishay Intertechnology, Inc. provided earnings guidance for the first quarter of 2026. For the period, the company expects revenues in the range of $800 million and $830 million. Board Change • Feb 01
Insufficient new directors There is 1 new director who has joined the board in the last 3 years. The company's board is composed of: 1 new director. 4 experienced directors. 4 highly experienced directors. Independent Director John Malvisi was the last director to join the board, commencing their role in 2023. The company’s insufficient board refreshment is considered a risk according to the Simply Wall St Risk Model. Ankündigung • Jan 28
Vishay Intertechnology, Inc. Introduces Five New 1200 V MOSFET Power Modules Vishay Intertechnology, Inc. introduced five new 1200 V MOSFET power modules designed to increase power efficiency for medium to high frequency applications in automotive, energy, industrial, and telecom systems. The Vishay Semiconductors VS-SF50LA120, VS-SF50SA120, VS-SF100SA120, VS-SF150SA120, and VS-SF200SA120 feature Vishay's latest generation silicon carbide (SiC) MOSFETs in the industry-standard SOT-227 package. Offered in single switch and low side chopper configurations, each power module released features a SiC MOSFET integrated with a soft body diode offering low reverse recovery. The result is reduced switching losses and increased efficiency for solar inverters; off-board chargers for electric vehicles (EV); SMPS, DC/DC converters, UPS, and HVAC systems; large scale battery storage systems; and telecom power supplies. The compact SOT-227 package of the VS-SF50LA120. Low side chopper configurations, each Power module released features a SiCMOSFET integrated with a Soft body diode offering low reverse Recovery. The result is reduced switching loss and increased efficiency for solar inverter; off-board chargers For electric vehicles (EV); SM PS, DC/DC converters; UPS, and HVAC system; large scale battery storage systems); and telecom power supplies. The Compact SOT-227 package of The VS-SF50LA120; VS-SF50SA120; VS-SF100SA 120, VS-SF100SA12 0, VS-SF150SA 120, and VS- SF200SA120 are available now, with lead times of 13 weeks. Vishay manufactures one of the world's largest portfolios of discrete semiconductors and passive electronic components that are essential to innovative designs in the automotive, industrial, computing, consumer, telecommunications, military, aerospace, and medical markets. Price Target Changed • Jan 22
Price target increased by 11% to US$15.00 Up from US$13.50, the current price target is an average from 2 analysts. New target price is 21% below last closing price of US$19.08. Stock is up 11% over the past year. The company is forecast to post a net loss per share of US$0.05 next year compared to a net loss per share of US$0.23 last year. Ankündigung • Jan 21
Vishay Intertechnology, Inc. Introduces Four New 100 V Gen 2 Trench Mos Barrier Schottky (Tmbs®?) Rectifier Modules in the Compact, Fully Insulated Sot-227 Package Vishay Intertechnology, Inc. introduced four new 100 V Gen 2 Trench MOS Barrier Schottky (TMBS®?) rectifier modules in the compact, fully insulated SOT-227 package. Optimized for power conversion in industrial applications, the devices offer best-in-class forward voltage drop down to 0.83 V to reduce conduction losses. The Vishay Semiconductors rectifier modules released consist of the dual-diode 100 A VS-QA100FA10, 200 A VS-QA200FA10, and 400 A VS-QA400FA10 in parallel configurations, and the 150 A single phase bridge VS-QA150BA10. With their industry-standard SOT-227 package, the devices can be used as drop-in replacements for competing solutions to increase efficiency. The modules combine their ultra low forward voltage drop and high current ratings with negligible Qrr and high temperature operation to +150 degC. The devices are intended for high frequency converters and power supplies in welding and industrial SMPS applications, 48 V battery-powered light vehicles, and telecom equipment, and provide blocking diodes for large battery systems. The VS-QA100FA 10, VS-QA200FA 10, VS-Q A200FA10, and VS-QA400FA 10 are RoHS-compliant and UL-approved in accordance with file E78996. Samples and production quantities of the new TMBS rectifier modules are available now, with lead times of 18 weeks. Ankündigung • Dec 18
Vishay Intertechnology Introduces Thin Film Chip Fuses with Fast and Very Fast Acting Performance Vishay Intertechnology, Inc. introduced two new series of thin film chip fuses. The Vishay Sfernice S2F and S3F devices are designed to ensure circuit continuity with minimal resistance and reliable interruption under overload conditions, while providing designers with options for fast or very fast acting protection. Offered in 0402, 0603, and 1206 case sizes, the fuses are UL 248-14 compliant and cover rated currents from 0.315 A to 7 A. Both series combine low resistance with body temperature rise below 75 °C at 100 % rated current, ensuring high reliability in compact footprints. The devices are lead (Pb)-free, halogen-free, and RoHS-compliant. The key distinction between the two series is their fusing speed at 200 % overload. The S2F series, which is fast acting, is designed to open in less than one minute, while the S3F series, which is very fast acting, is designed to open in less than five seconds. This difference enables designers to tailor fuse performance to the specific protection needs of their applications. The S2F series provides protection where brief overloads are tolerable without immediate interruption, while the S3F series is optimized for sensitive circuits that require the quickest possible response. By offering a wide current rating range, precise fusing times, and three footprint options, the new products simplify design flexibility while supporting high reliability and competitive pricing. Typical applications include secondary circuit protection across a broad range of electronic systems where stability and precision are critical. Samples and production quantities of the S2F and S3F series are available now, with lead times of 16 weeks. Ankündigung • Dec 11
Vishay Intertechnology, Inc. Introduces New AEC-Q200 Qualified, Glass Protected NTC Thermistor in 0402 Case Size Vishay Intertechnology, Inc. introduced a new AEC-Q200 qualified, glass protected NTC thermistor in the widely used 0.5 mm by 0.5 mm by 1 mm 0402 case size. The Vishay BC componentsNTCS0402E3104XT combines a high beta (B25/85) value of 4311 K with an electrical resistance value at +25 degC (R25) of 100 kO. Fully glass coated and protected, the thermistor released offer tolerances down to +- 1 % for both its R25 and B25/85 values for precise temperature sensing, protection, and compensation over a wide temperature range of -55 degC to +150 degC. The device offers ESD withstand of > 25 kV in accordance with the Human Body Model (HBM). With its industry-standard size, the NTCS0402E3 104XT provides a drop-in replacement for competing solutions in automotive LED modules, electronic control units, sensor clusters, battery packs, and camera, radar, and lidar modules; energy meters; office equipment; and industrial smoke and fire detectors. Featuring an SMD construction with NiSn terminations, the NTC thermistor is suitable for wave or reflow selling. RoHS-compliant and halogen-free, the device is delivered on punched paper tape on reels in packages of 10 000 units. For fast design-in, a SPICE model is available. Ankündigung • Dec 03
Vishay Intertechnology, Inc. Introduces Two New 1200 V Mosfet Power Modules Vishay Intertechnology, Inc. introduced two new 1200 V MOSFET power modules designed to increase efficiency and reliability for medium to high frequency applications in automotive, energy, industrial, and telecom systems. Offering four and six MOSFETs, respectively, in the low profile MAACPAK PressFit package, the Vishay Semiconductors VS-MPY038P120 and VS-MPX075P120 combine the latest silicon carbide (SiC) technology with a rugged transfer mold construction. The power modules released integrate Vishay's latest generation SiC MOSFETs with an NTC thermistor for temperature sensing and fast intrinsic SiC diodes with low reverse recovery. The result is reduced switching losses and increased efficiency for solar inverters; chargers for electric (EV) and hybrid electric (HEV) vehicles; motor drives, welding equipment, DC/DC converters, UPS, and HVAC systems; large scale battery storage systems; and telecom power supplies. For increased reliability, the rugged transfer mold technology of the VS-MPY038 P120 and VS-MPX07P120 allows them to achieve much longer product lifecycles than legacy solutions available on the market, while improving thermal resistance. For more efficient, cleaner switching, the devices' low profile helps reduce parasitic Inductance and EMI, while saving space. The modules' PressFit pins are arranged in a matrix that adheres to industry-standard layouts, allowing for easy replacement of competing solutions in existing designs to enhance performance. The VS-MPY038p120 offers a full-bridge inverter topology with low on-resistance of 38 mO and continuous drain current of 35 A at +80 degC, while the VS-MPX075P 120 features a three-phase inverter topology with on-resistance of 75 mO and continuous drain current the current of 18 A. Both devices deliver high speed switching with low capacitance and offer a high maximum operating junction temperature of +175 degC. The power modules are RoHS-compliant and halogen-free. Samples and production quantities of the VS-MPX075 P120 and VS-MPY038C are available now, with lead times of 13 weeks. Ankündigung • Nov 26
Vishay Intertechnology, Inc. Releases 1500 V Automotive Grade 1 Form A Solid-State Relay in 4-Pin SMD-8 Package for 800 V Battery Monitoring Systems Vishay Intertechnology, Inc. introduced a new 1500 V Automotive Grade 1 Form A solid-state relay in a 4-pin SMD-8 package. Designed for 800 V battery monitoring systems in automotive, energy storage, and industrial applications, the Vishay Semiconductors VORA1150 combines a high 1414 Vpeak repetitive isolation voltage with a low maximum leakage current of 1 uA. The innovative 4-pin design of the relay released allows the device to provide a 5 mm creepage distance on its output pins, as required by the DIN EN-60644-1 standard for isolation monitoring applications in 800 V battery monitoring systems. In addition, the VORA1150 meets hipot test requirements for 800 V battery architectures in electric vehicles (EV). The AEC-Q102 qualified device enables isolation and leakage current monitoring in battery management systems (BMS), pre-charge relays, and on-board chargers; energy storage systems (ESS); industrial HVAC systems; and solar panels. In these applications, the relay's high repetitive isolation voltage and mold material with a comparison tracking index (CTI) of 600 provide increased reliability, while low maximum turn-on and turn-off times of 150 us and 250 us, respectively, ensure fast operation. RoHS-compliant, halogen-free, and Vishay Green, the VORA11 50 offers an avalanche current capability of 0.9 mA, isolation test voltage of 5300 VRMS, and operating temperature range of -40 degC to +125 degC. Samples and production quantities of the new 1 Form A solid-state relays are available now, with lead times of eight weeks. Declared Dividend • Nov 23
Third quarter dividend of US$0.10 announced Dividend of US$0.10 is the same as last year. Ex-date: 3rd December 2025 Payment date: 12th December 2025 Dividend yield will be 3.2%, which is higher than the industry average of 1.4%. Sustainability & Growth Dividend is being paid despite the company being loss-making over the last 12 months and having no free cash flows available, indicating it may be using cash reserves or debt to pay the dividend. The dividend has increased by an average of 5.2% per year over the past 10 years and has been stable with no material reductions to payments, indicating a long track record of dividend growth and stability. Ankündigung • Nov 20
Vishay Intertechnology, Inc. Declares Quarterly Dividend, Payable on December 12, 2025 Vishay Intertechnology, Inc. announced that the Company’s Board of Directors declared a dividend of $0.10 per share of common stock and Class B common stock, to be paid December 12, 2025 to stockholders of record as of the close of business December 3, 2025. Ankündigung • Nov 19
Vishay Intertechnology AEC-Q200 Qualified, 30 W Thick Film Power Resistor Offers High Reliability for Automotive Applications Vishay Intertechnology, Inc. introduced a new AEC-Q200 qualified, 30 W thick film power resistor in a compact TO-220 package for direct mounting on a heatsink. Engineered to ensure exceptional reliability and durability in even the most extreme automotive environments, the Vishay Sfernice LTA 30 withstands high humidity conditions and temperatures to +125 degC, while providing a high tolerance against vibration and electrical stress. In addition, the resistor combines a high 500 V operating voltage with a strong overload capability (1.5x Pr for 5 s) to ensure stability under transients and high voltage conditions. Together, these characteristics guarantee consistent performance in safety-critical applications. Offering a broad range of resistance values from 0.010 O to 450 kO, with tolerances down to +- 1 %, the device released serves as the precharge or discharge resistor for on-board chargers, battery management systems (BMS), and motor controls for electric vehicles (EV), hybrid electric vehicles (HEV), and plug-in hybrid electric vehicles (PHEV). The RoHS-compliant device offers a non-inductive design and a high dielectric strength of 1500 Vrms. Samples and production quantities of the LTA 30 are available now, with lead times of four to six weeks. Buy Or Sell Opportunity • Nov 14
Now 21% undervalued after recent price drop Over the last 90 days, the stock has fallen 11% to US$13.25. The fair value is estimated to be US$16.75, however this is not to be taken as a buy recommendation but rather should be used as a guide only. Revenue has declined by 7.7% over the last 3 years. Meanwhile, the company became loss making. Ankündigung • Nov 13
Vishay Intertechnology, Inc. Introduces New High Speed Silicon Pin Photodiode with Enhanced Sensitivity to Visible and Infrared Light Vishay Intertechnology, Inc. broadens itsoptoelectronics portfolio with the introduction of a new high speed silicon PIN photodiode with enhanced sensitivity to visible and infrared light. Featuring a compact 3.2 mm by 2.0 mm top-view, surface-mount package with a low 0.6 mm profile, the Vishay Semiconductors VEMD8083 features high reverse light current and fast response times for improved performance in biomedical applications such as heart rate and blood oxygen monitoring. The device released offers a smaller form factor than previous-generation solutions, allowing for integration into compact wearables, such as smart rings, and consumer health monitoring devices. However, while its chip size is reduced, the photodiode's package is optimized to support a large radiant sensitive area of 2.8 mm2, which enables high reverse light current of 11 mA at 525 nm, 14 mA at 660 nm, and 16 mA at 940 nm. The VEMD8083's high sensitivity is especially valuable in biomedical applications like photoplethysmography (PPG), where it detects variations in blood volume and flow by measuring light absorption or reflection from blood vessels. Accurate detection in these scenarios is essential for diagnosing and monitoring conditions such as cardiovascular disease. Pin to pin compatible with competing solutions, the device detects visible and near infrared radiation over a wide spectral range from 350 nm to 1100 nm. For high sampling rates, the VEMD8083 offers fast rise and fall times of 30 ns and diode capacitance of 50 pF. The photodiode features a +- 60deg angle of half-sensitivity and an operating temperature range of -40 degC to +85 degC. RoHS-compliant, halogen-free, and Vishay Green, the device provides a moisture sensitivity level (MSL) of 3 in accordance with J-STD-020 for a floor life of 168 hours. Samples and production quantities of the VEMD8083 are available now. Reported Earnings • Nov 06
Third quarter 2025 earnings: Revenues exceed analysts expectations while EPS lags behind Third quarter 2025 results: US$0.058 loss per share (improved from US$0.14 loss in 3Q 2024). Revenue: US$790.6m (up 7.5% from 3Q 2024). Net loss: US$7.88m (loss narrowed 59% from 3Q 2024). Revenue exceeded analyst estimates by 1.4%. Earnings per share (EPS) missed analyst estimates. Revenue is forecast to grow 6.2% p.a. on average during the next 2 years, compared to a 10% growth forecast for the Electronic industry in the US. Over the last 3 years on average, the company's share price growth rate has exceeded its earnings growth rate by 73 percentage points per year, which is a significant difference in performance. New Risk • Nov 05
New major risk - Revenue and earnings growth Earnings have declined by 17% per year over the past 5 years. This is considered a major risk. Ultimately, shareholders want to see a good return on their investment and that generally comes from sharing in the company's profits. If profits are declining over an extended period, then in most cases the share price will decline over time unless the company can turn around its fortunes. A trend of falling earnings can be very difficult to turn around. If the company is well already established it may also be a sign the company has matured and is in decline. In addition, if the company pays dividends it will also likely need to reduce or cut them, striking a dual blow to total shareholder returns. Currently, the following risks have been identified for the company: Major Risks Dividend is not well covered by earnings and cash flows. Paying a dividend despite being loss-making. Paying a dividend despite having no free cash flows. Earnings have declined by 17% per year over the past 5 years. Ankündigung • Nov 05
Vishay Intertechnology, Inc. Announces Executive Appointments Vishay Precision Group, Inc. announced the appointment of Yair Alcobi to position of Chief Business and Product Officer and the promotion of Rafi Ouzan to post of Chief Operating Officer, effective today. Both positions are newly created. As Chief Business and Product Officer, Yair Alcobi will oversee sales, marketing, product strategy, and business development. Mr. Alcobi brings over 25 years of senior level management experience with both private and public industrial technology businesses to his new role. Mr. Alcobi held significant leadership positions at notable semiconductor test and industrial technology companies including KLA Corporation (formerly Orbotech) where he served as President of the PCB Division at KLA and President of Orbotech's East Asia Subsidiary. Mr. Alcobi also served at Kulicke & Soffa (K&S). Mr. Alcobi holds a BSc in Mechanical Engineering from the Technion - Israel Institute of Technology, and an Executive MBA from Haifa University, as well as having completed executive programs at Stanford Graduate School of Business and the Technion Institute of Management. As Chief Operating Officer, Rafi Ouzan will be responsible for overseeing and integrating the company's operations, including quality management and supply chain optimization across all manufacturing sites. Mr. Ouzan, who served as the Senior Vice President and Division Head of Weighing Solutions at VPG, brings more than 30 years of management experience to this new role. Previously, Mr. Ouzan served as VPG's Vice President of the Force Sensors Division. Before that Mr. Ouzan was with Vishay Intertechnology where he served as Vice President, Force Sensors Division and held various positions including as Vice President, Operations and Operations Manager, Load Cell Division. Mr. Ouzan holds a bachelor's degree in material engineering and an MBA, each, from Ben-Gurion University. Ankündigung • Oct 30
Vishay Intertechnology, Inc. Launches Space-Grade 150 W Planar Transformers Optimized for 28 V Input Forward Converters Vishay Intertechnology, Inc. introduced a new series of 150 W low profile, space-grade planar transformers with multiple output secondaries -- the industry's first such devices optimized for 28 V input forward converters in avionics, military, and space (AMS) applications. Offering a lower cost, smaller size, and higher density than traditional planar transformers, the Vishay Custom Magnetics SGTPL-28 series components meet the requirements of MIL-PRF-27 level T, INST-EEE-002, and MIL-STD-981. In addition to 28 V forward converters, the devices released will be used in high reliability switch mode power supplies and active clamp or dual switch forward converters. In these applications, multiple secondary windings with a center tap can power up to two 12 V channels or four 5 V channels. Designed for the harshest of environments, the transformers combine their MIL-PRF-27 and MIL-STD-991 qualifications with a rugged package featuring over-molded windings and high temperature operation to +130 degC. SGTPL-28 series devices withstand numerous thermal shock cycles and high levels of mechanical shock and vibration. The transformers provide up to 40 % greater winding fill than traditional planar devices, resulting in a smaller package size to save PCB space and improve efficiency and power density. Their unique winding technology and internal construction enable easy customization to meet design-specific requirements, while the devices' materials and production techniques allow for lower costs. In addition, strategic inventory management results in short lead times, typically without non-recurring engineering (NRE) charges for customization. SGTPL-28 Series transformers are available with six screening options: P level screening for design validation testing; L level screening for low Earth orbit (LEO) applications; INST-EEE-002 level 2 and level 3; MIL-STD-981 Table VI class B; and MIL-STD-98 1 Table VI and VII class S. The devices offer an input voltage range from 18 V to 36 V, a dielectric withstand voltage of 1250 VDC, and leakage inductance of 0.5 uH. Samples and production quantities of the SGTPL-28 series are available now, with lead times of eight weeks for P level screening; 12 weeks for L level screening; 16 weeks for B level screening; and 26 weeks for S level screening. Ankündigung • Oct 22
Vishay Intertechnology Smd Inrush Current Limiting Ptc Thermistors Increase Board-Level Efficiency to Lower Costs Vishay Intertechnology, Inc. introduced a new series of insulated, surface-mount inrush current limiting positive temperature coefficient (PTC) thermistors. Designed to increase board-level efficiency and lower costs in automotive and industrial applications, Vishay BC components PTCES series devices combine maximum energy handling to 340 J with high maximum voltages of 1200 VDC in a compact package. Compared to competing devices, the PTC thermistors released offer up to 260 % higher energy handling capabilities, allowing designers to utilize fewer components in their circuits to save board space and lower overall costs. In addition, the PTCES series offers 20 % higher maximum voltages than competing devices to meet the requirements of a broader range of designs. The thermistors provide current limitation and overload protection in AC/DC and DC/DC converters; DC-Link, energy dump, and emergency discharge circuits; on-board chargers (OBC) and battery charging equipment; and motor drives. For these applications, the self-protecting devices withstand > 100 000 inrush power cycles and are AEC-Q200 qualified for shock and vibration, eliminating the need for reinforced mounting adhesives. The PTCES series barium titanate thermistors consist of a solder-connected homogeneous ceramic PTC encapsulated in a UL 94 V-0 compliant, self-extinguishing, washable plastic housing with insulation up to 3 kVAC. Offering a low profile of 9.6 mm, the RoHS-compliant, halogen-free devices can be automatically mounted by pick and place equipment to reduce placement costs. Ankündigung • Oct 15
Vishay Intertechnology, Inc. Introduces A New AEC-Q200 Qualified, 50 W Thick Film Power Resistor in A Compact To-220 Package for Direct Mounting on A Heatsink Vishay Intertechnology, Inc. introduced a new AEC-Q200 qualified, 50 W thick film power resistor in a compact TO-220 package for direct Mounting on a heatsink. Engineered to ensure exceptional reliability and durability in even the most extreme automotive environments, the Vishay Sfernice LTA 50 withstands high humidity conditions and temperatures to +175 degC, while providing a high tolerance against vibration and electrical stress. This guarantees consistent performance in safety-critical applications. Offering a broad range of resistance values from 0.010 O to 450 kO, with tolerances down to +- 1 %, the device released serves as the precharge or discharge resistor for on-board chargers, battery management systems (BMS), and motor controls for electric vehicles (EV), hybrid electric vehicles (HEV), and plug-in hybrid electric vehicles (PHEV). The RoHS-compliant device offers a non-inductive design, with a high dielectric strength of 1500 Vrms and limiting element voltage of 500 V. Samples and production quantities of the LTA 50 are available now, with lead times of 10 weeks. Ankündigung • Oct 01
Vishay Intertechnology Power Metal Strip®? Resistor Delivers Power to 5 W in Compact 1206 Case Size Vishay Intertechnology, Inc. introduced a new surface-mount Power Metal Strip®? current sense resistor that combines a high power rating up to 5 W, TCR down to +- 75 ppm/degC, and extremely low resistance values down to 0.3 mO in the compact 1206 case size. With power ratings 20 times higher than standard resistors in the 1206 footprint, the Vishay Dale WSLF1206 provides a power density of > 650 W/in2, allowing designers to save board space in high power circuits by utilizing the smallest resistor possible without the need to parallel resistance elements. The device's low TCR provides stable and accurate current measurement across a wide temperature range from -65 degC to +170 degC, while its low resistance values minimize power losses and improve end product efficiency. The WSLF1206's advanced construction incorporates a solid metal manganese-copper, nickel-chromium aluminum alloy resistive element with low TCR (< 20 ppm/degC). This results in a higher power resistor in a smaller size that maintains the superior electrical characteristics of the Power Metal Strip construction. A proprietary processing technique produces resistance values ranging from 0.3 mO to 3 mO, with tolerances of +- 1.0 % and +- 5.0 %. The device provides low thermal EMF (< 3 mV/degC) and very low inductance (< 5 nH) to minimize signal distortion. The resistor released is ideal for all types of current sensing and pulse applications, including switching and linear power supplies, power amplifiers, shunts, power inverters, and battery management. Typical applications will include industrial motor drives, robotics, power tools, HVAC systems, and UPS; graphics, data storage, and VRMs for supercomputers; and consumer appliances. The device is sulfur-resistant, RoHS-compliant, and halogen-free. Samples and production quantities of the WSLF1206 are available now, with lead times of 8 to 10 weeks. Ankündigung • Sep 25
Vishay Intertechnology, Inc. Releases New 1 A and 2 A Gen 7 1200 V FRED Pt Hyperfast Rectifiers in SlimSMA HV (DO-221AC) Package Vishay Intertechnology, Inc. expanded its Gen 7 platform of 1200 V FRED Pt Hyperfast rectifiers with four new devices in the eSMP series SlimSMA HV (DO-221AC) package. Optimized for industrial and automotive applications, the 1 A and 2 A rectifiers not only offer the best trade-off between reverse recovery charge (Qrr) and forward voltage drop for devices in their class, but also provide the lowest junction capacitance and recovery time. The Vishay Semiconductors rectifiers released include the VS-E7JX0112-M3 and VS-E7JX0212HM3, and AEC-Q101 qualified VS-E7 JX0112HM3 and VS-E7 JX0212HM3. To reduce switching losses and increase efficiency, the devices combine fast recovery times down to 45 ns with Qrr down to 105 nC typical, forward voltage drop down to 1.45 V, and junction capacitance down to 2.5 pF. The robust rectifiers offer non-repetitive peak surge current up to 21 A in a compact package measuring 2.6 mm by 5.2 mm with a low 0.95 mm profile, compared to 2.3 mm for the competing SMA package with a similar footprint. Combined with a minimum 3.2 mm creepage distance and molding compound with a comparative tracking index (CTI) 600 (Material Group I), the devices reduce component counts and lower BOM costs based on IEC 60664-1 requirements for high voltage applications. The VS-E7JX112-M3, VS-E7JX1112HM3, VS-E7 JXX0212-M3, and VS-E7Jx0212-M3 will serve as clamp, snubber, and freewheeling diodes in flyback auxiliary power supplies and high frequency rectifiers for bootstrap driver functionality, while providing desaturation protection for the latest fast switching IGBTs and high voltage Si /SiC MOSFETs. Typical applications for the devices include industrial drives and tools, on-board chargers and motors for electric vehicles (EV), energy generation and storage systems, and Cuk converters and industrial LED SEPIC circuitry. The rectifiers feature a planar structure and platinum doped lifetime control that guarantee system reliability and robustness without compromising on performance, while their optimized stored charge and low recovery current minimize switching losses and reduce power dissipation. RoHS-compliant and halogen-free, the devices feature a Moisture Sensitivity Level of 1 in accordance with J-STD-020 and offer high temperature operation to +175 degC. Samples and production quantities of the new Gen 7 rectifiers are available now, with a lead time of eight weeks. Vishay manufactures one of the world's largest portfolios of discrete semiconductors and passive electronic components that are essential to innovative designs in the automotive, industrial, computing, consumer, telecommunications, military, aerospace, and medical markets. Serving customers worldwide, Vishay is The DNA oftech. Ankündigung • Sep 18
Vishay Intertechnology, Inc. Launches Industry's First Automotive Grade Ceramic Capacitors with Y1 Rating in SMD Casing Vishay Intertechnology, Inc. introduced a new series of Automotive Grade AC line rated ceramic disc safety capacitors that are the industry's first with a Y1 rating to be offered in a surface-mount casing. Combining their Y1 rating of 500 VAC and 1500 VDC with high Capacitance to 4.7 nF, the Vishay BCcomp componentsSMDY1 Automotive Series devices are designed to provide EMI /RFI suppression and filtering in harsh, high humidity environments. AEC-Q200 qualified with PPAP available, the capacitors released will be used in on-board chargers (OBC), traction inverters, battery management systems (BMS), e-compressors, and AC/DC converters in electric (EV), hybrid electric (HEV), and plug-in hybrid electric (PHEV) vehicles. For these applications, the devices offer high humidity resistance with a Class IIB humidity grade (in accordance with IEC60384-14 annex I) and can withstand the 85 /100 h test. Allowing for surface-mount assembly with a reflow soldering process, SMDY1 Automotive Series capacitors reduce production costs. Unlike leaded components, the devices offer a low, flat profile on the PCB to enable flatcasings or backside PCB mounting without the clearance space required by through-hole capacitors. RoHS-compliant and halogen-free, the components consist of a copper-plated ceramic disc and feature encapsulation made of flame-resistant epoxy resin in accordance with UL 94 V-0. The devices are available in two case sizes: the C case with a creepage distance of 10 mm and the D case with a creepage range of 14.5 mm. Ankündigung • Sep 12
Vishay Intertechnology, Inc. Introduces New Series of Class 1 Radial-Leaded High Voltage Single Layer Ceramic Disc Capacitors Vishay Intertechnology, Inc. introduced a new series of Class 1 radial-leaded high voltage single layer ceramic disc capacitors that deliver a low dissipation factor (DF) and DC bias for industrial and medical applications. Vishay Roederstein HVCC Class 1 series capacitors feature capacitance loss of < 25 % at 15 kV, which is half that of Class 2 devices. In addition, their < 1.0 % DF at 1 kHz is 0.5 % lower. The result is reduced power loss and high reliability in high voltage generators for baggage scanners, medical and industrial X-ray applications, air purifiers and ionizers, and pulsed lasers. HVCC Class 1 series devices feature a capacitance range from 100 pF to 1 nF -- with standard tolerances of +- 10 % - voltages of 15 kVDC, and an operating temperature range from -30 degC to +85 degC. The capacitors consist of a silver-plated ceramic disc with tinned copper-clad steel connection leads offering 0.65 mm and 0.80 mm diameters. The RoHS-compliant devices are available with straight leads with spacing of 9.5 mm and 12.5 mm, and feature an encapsulation made of flame-resistant epoxy resin in accordance with UL 94 V-0. Samples and production quantities of the HVCC Class 1 series are available now, with lead times of 12 weeks. Upcoming Dividend • Sep 04
Upcoming dividend of US$0.10 per share Eligible shareholders must have bought the stock before 11 September 2025. Payment date: 25 September 2025. The company is not currently making a profit and is not cash flow positive. Trailing yield: 2.6%. Lower than top quartile of American dividend payers (4.4%). Higher than average of industry peers (1.0%). Ankündigung • Sep 03
Vishay Intertechnology, Inc. Introduces A New AEC-Q200 Qualified DC-Link Metallized Polypropylene Film Capacitor Designed for the Harsh Conditions of Automotive, Energy, and Industrial Applications Vishay Intertechnology, Inc. introduced a new AEC-Q200 qualified DC-Link metallized polypropylene film capacitor designed for the harsh conditions of automotive, energy, and industrial applications. Offering high temperature operation up to +125 degC, the Vishay Roederstein MKP1848e delivers ripple current up to 44.5 A and withstands temperature humidity bias (THB) in accordance with Grade III of IEC60384-16 ed.3 - 60 degC /93 % R.H for 1344 hours at rated voltage. With its high temperature operation and resistance to high humidity, the Automotive Grade capacitor released is ideal for automotive power conversion applications such as on-board chargers (OBC), power trains, HVAC systems, e-compressors, and DC/DC converters. This next-generation DC-Link capacitor also addresses the stringent needs for energy and industrial power conversion applications such as fast chargers, solar inverters, rectifiers for hydrogen electrolyzers, battery storage systems, motor drives, and UPS. The MKP1848e offers rated capacitance from 1 uF to 140 uF and low ESR down to 1.0 mO, in rated voltages from 500 VDC to 1300 VDC. The devices provide 25 % higher ripple current density than previous-generation solutions with the same volume, while its compact footprint and pitch options down to 22.5 mm enable volume reductions up to 40% and 15 %, respectively, at 500 VDC and 900 VDC. To meet the standard high voltage levels of electric (EV) and plug-in hybrid electric vehicles (PHEV), the MKP1848e withstands operating voltages from 250 VDC to 800 VDC at +125 degC for a limited time. It also features high thermal shock capabilities -- withstanding 1000 temperature cycles from -40 degC to +125 degC, with a 30-minute well time for each temperature extreme. The capacitor is available with customized terminals on request. Samples and production quantities of the MKP1848e are available now, with lead times of 10 weeks. Ankündigung • Aug 20
Vishay Intertechnology, Inc. Introduces Two New Series of Automotive Grade 3.3 V to 36 V Esd Protection Diodes in the Sot-23 Package Vishay Intertechnology, Inc. introduced two new series of Automotive Grade 3.3 V to 36 V ESD protection diodes in the SOT-23 package. Offering low thermal resistance, the single-line VGSOTxx and two-line VGSOTxxC series ensure more efficient heat dissipation than the previousgeneration GSOTxx /xxC devices, allowing for a more robust design that enables higher peak pulse power ratings up to 540 W and current ratings up to 44 A at an 8/20 us pulse. With their high power and current capabilities, the Vishay Semiconductors devices released are ideal for a wide range of applications. They will be used in automotive electronics and controls, fuel cells, and smart systems; energy monitoring and metering systems; industrial automation systems, motor drives, and power tools; computers and computer peripherals; consumer appliances and entertainment and healthcare devices; fixed and mobile telecom infrastructure; medical instrumentation; and military electronic warfare systems. The VGSOTxx and VGSOTxxC series can both be used as unidirectional ESD protection devices. With their dual, common anode configuration, VGSOTxxC series components can also serve as bidirectional devices. If higher power is needed, their dual diodes can be used in parallel to double their surge power ratings, line capacitance, and reverse leakage current. RoHS-compliant, halogen-free, and Vishay Green, the VGSOTxx and V GSOTxxC series provide ESD immunity in accordance with IEC 61000-4-2 and ISO 10605 (+- 30 kV air and contact discharge), in addition to the AEC-Q101 human body model: class H3B (> 8 kV). The devices provide direct drop-in replacements for Vishay's previous-generation GSOT diodes and competing SOT series devices, and are available in AEC-Q101 qualified versions. These new products also fulfill the Vishay Automotive Grade requirements to ensure continuously excellent quality at the highest level. Samples and production quantities of the new ESD protection diodes are available now, with lead times of 12 weeks. Declared Dividend • Aug 15
Second quarter dividend of US$0.10 announced Dividend of US$0.10 is the same as last year. Ex-date: 11th September 2025 Payment date: 25th September 2025 Dividend yield will be 2.7%, which is higher than the industry average of 1.4%. Sustainability & Growth Dividend is being paid despite the company being loss-making over the last 12 months and having no free cash flows available, indicating it may be using cash reserves or debt to pay the dividend. The dividend has increased by an average of 5.2% per year over the past 10 years and has been stable with no material reductions to payments, indicating a long track record of dividend growth and stability. Ankündigung • Aug 14
Vishay Intertechnology, Inc. Introduces Miniature, Sealed, Industrial-Grade Multi-Turn SMD Cermet Trimmers for Harsh Environments Vishay Intertechnology, Inc. introduced a new series of industrial-grade, multi-turn, surface-mount cermet trimmers. Designed for space-constrained applications in harsh environments, the Vishay Sfernice TSM41 series devices combine a compact 4 mm by 4 mm footprint with a wide temperature range of -55 degC to +140 degC and IP67 sealing. Compared to previous-generation devices, the trimmers released offer a 42 % smaller case size, allowing designers to save board space and optimize package density. In addition, the TSM41 series allows for fine-tuning of its wide 10 O to 1 MO resistance range, and a faster setting-to-time ratio than single-turn trimmers. Offering a 0.25 W power rating at +85 degC, the devices are available in both top and side adjustment styles, providing flexibility for various design requirements. The TSM41 series can be mounted directly to the PCB, allowing for automated PCB assembly and setting processes -- enhancing production efficiency to save time and lower costs -- while enabling the components to be placed on both sides of the board. Fully sealed to withstand standard board wash processing, the trimmers ensure reliability in welding equipment, power tools, smoke detectors, and heating, cooling, and ventilation systems. Samples and production quantities of the TSM41 series are available now, with lead times of 15 weeks. Ankündigung • Aug 13
Vishay Intertechnology, Inc. Proposes Quarterly Cash Dividend, Payable on September 25, 2025 Vishay Intertechnology, Inc. announced that the Company’s Board of Directors declared a dividend of $0.10 per share of common stock and Class B common stock, to be paid September 25, 2025 to stockholders of record as of the close of business September 11, 2025. Future dividends will be subject to Board approval. Ankündigung • Aug 07
Vishay Intertechnology, Inc. Introduces Two New IHDM Automotive Grade IHDM Automotive Grade Edge-Wound, Through-Hole Inductors Vishay Intertechnology, Inc. introduced two new IHDM Automotive Grade edge-wound, through-hole inductors in the 1107 case size with soft saturation current to 422 A. Featuring a powdered iron alloy core technology, the Vishay Inductors Division's IHDM-1107BBEV-2A and IHDM-1107 BBEV-3A provide stable inductance and saturation over a demanding operating temperature range from -40 degC to +180 degC with low power losses and excellent heat dissipation. The edge-wound coil of the devices released provides low DCR down to 0.22 mO, which minimizes losses and improves rated current performance for increased efficiency. Compared to competing ferrite-based solutions, the IHDM-1107bBEV-2A andIHDM-1107B BEV-3A offer 30 % higher rated current and 30 % higher saturation current levels at +125 degC. The inductors' soft saturation provides a predictable inductance decrease with increasing current, independent of temperature. With a high isolation voltage rating up to 350 V, the AEC-Q200 qualified devices are ideal for high current, high temperature power applications, including DC/DC converters, inverters, on-board chargers (OBC), domain control units (DCU), and filters for motor and switching noise suppression in internal combustion (ICE), hybrid (HEV), and full-electric (EV) vehicles. The inductors are available with a selection of two core materials for optimized performance depending on the application. Standard terminals for the IHDM-110 7BBEV-2A. and IHDM-1105BBEV-3A are stripped and tinned for through-holemounting. Vishay can customize the devices' performance -- including inductance, DCR, rated current, and voltage rating -- upon request. The devices are RoHS-compliant, halogen-free, and Vishay Green. Samples and production quantities of the IHDM-110 sevenB BEV-2A and I HDM-1107BBE V-3A are available now, with lead times of 14 weeks. Vishay manufactures one of the world's largest portfolios of discrete semiconductors and passive electronic components that are essential to innovative designs in the automotive, industrial, computing, consumer, telecommunications, military, aerospace, and medical markets. Reported Earnings • Aug 06
Second quarter 2025 earnings released Second quarter 2025 results: Net income: (down US$23.5m from profit in 2Q 2024). Over the last 3 years on average, the company's share price growth rate has exceeded its earnings growth rate by 51 percentage points per year, which is a significant difference in performance. New Risk • Aug 06
New major risk - Revenue and earnings growth Earnings have declined by 5.4% per year over the past 5 years. This is considered a major risk. Ultimately, shareholders want to see a good return on their investment and that generally comes from sharing in the company's profits. If profits are declining over an extended period, then in most cases the share price will decline over time unless the company can turn around its fortunes. A trend of falling earnings can be very difficult to turn around. If the company is well already established it may also be a sign the company has matured and is in decline. In addition, if the company pays dividends it will also likely need to reduce or cut them, striking a dual blow to total shareholder returns. Currently, the following risks have been identified for the company: Major Risks Dividend is not well covered by earnings and cash flows. Paying a dividend despite being loss-making. Paying a dividend despite having no free cash flows. Earnings have declined by 5.4% per year over the past 5 years. Ankündigung • Aug 06
Vishay Intertechnology, Inc. Provides Earnings Guidance for the Third Quarter of 2025 Vishay Intertechnology, Inc. provided earnings guidance for the third quarter of 2025. for the quarter, the company expects revenues in the range of $775 million+/- $20 million. Ankündigung • Jul 30
Vishay Intertechnology, Inc. Introduces New Series of Uni/Bidirectional 1500 W PAR TVS Solutions Offer High Temperature Operation to +185 °C in SMB (DO-214AA) Package Vishay Intertechnology, Inc. introduced a new series of uni/bidirectional 1500 W surface-mount PAR transient voltage suppressors (TVS) in the SMB (DO-214AA) package. To meet the demands of automotive applications, the Vishay General Semiconductor T15BxxA and T15BxxCA series are AEC-Q101 qualified and offer high temperature operation to +185 degC. Compared to TVS in the SMC (DO-214AB) package, the Automotive Grade devices released provide a 58 % smaller footprint to save board space and lower system costs. The unidirectional T15BxxA series offers extremely stable breakdown voltages from 12 V to 51 V, while the bidirectional T15BxxCA series provides breakdown voltages from 12V to 100 V. The devices offer excellent clamping capability -- 17.0 V to 70.1 V for the T15BxxA and 17.0 V to 137 V for the T15BxCA -- and very fast response times. The TVS are designed to protect sensitive electronics against voltage transients induced by inductive load switching and lightning. Typical applications will include lighting, electro-mechanical brake (EMB), and fuel pump control; 48 V DC/DC converters and inverters; integrated starter generators, BMS, vehicle control units (VCU), and on-board chargers; and telematics control units (TCU) for audio, electronic stability control (ESC), and radar sensors. Ankündigung • Jul 23
Vishay Intertechnology, Inc. Introduces New Industrial-Grade 3/8 Inch Square Single-Turn Cermet Trimmer Vishay Intertechnology, Inc. introduced a new industrial-grade 3/8 inch square single-turn cermet trimmer. Available with an extended shaft, cross-slot rotor, or knob option for easy finger setting, the Vishay Sfernice M61 is offered in several pin configurations in both top and side adjustment styles to optimize placement on the PCB. The device released combines a wide 10 to 2 M resistance range with a temperature range from -55 degC to +125 degC and a low temperature coefficient of 100 ppm/degC. Fully sealed to withstand standard board wash processing, the M61 offers a 0.5 W power rating at +85 degC, making it ideal for industrial applications including welding equipment, power tools, and 3D printers, in addition to heating, cooling, and ventilation systems. Samples and production quantities of the M61 are available now, with lead times of 15 weeks. Ankündigung • Jul 03
Vishay Intertechnology, Inc. Introduces New AEC-Q200 Qualified NTC Immersion Thermistor Vishay Intertechnology, Inc. introduced a new AEC-Q200 qualified NTC immersion thermistor. Featuring a miniature design with a compact sensor tip and thin insulated wire, the Vishay BCcomponentsNTCAIMM66H is ideal for the small spaces of liquid-cooled automotive systems, where it provides a fast 1.5 s response time to temperature changes. The rugged device released consists of a miniature NTC thermistor mounted in a stainless steel 316L housing with lead (Pb)-free brass, and 0.35 mm2 AWG#22 insulated lead wires with a FLR2X construction that enables a traction force higher than 30 N. These wires allow for direct crimping with automotive connectors -- eliminating the need for costly wire to wire connectors -- while the stainless-steel housing enables permanent contact with water or other liquids. The NTCAIMM66H will be used for temperature measurement, sensing, and control in liquid-cooled automotive systems such as HEV/EV on-board chargers (OBC) and charging plugs and sockets, in addition to solar heating systems, energy storage systems, industrial drives and tools, and servers. The device can be customized with different cable and stripping lengths, gauges, and conductor plating to meet the need of specific applications, enabling Vishay customers to integrate the thermistor into their complete sensor solutions for HEV /EV thermal management systems (TMS). The immersion sensor offers resistance at +25 degC (R25) of 10 kO, with tolerance of +- 2 %, and beta (B25/85) of 3984 K, with tolerance of +- 0.5 %. The device features maximum power dissipation of 100 mW and an operating temperature range of -40 degC to +125 degC. Samples and production quantities of the NTCAIMM 66H are available now, with lead times of 12 to 14 weeks. Ankündigung • Jun 25
Vishay Intertechnology, Inc. Expands Its CHA Series of AEC-Q200 Qualified Thin Film Chip Resistors with New Devices in the 0402 Case Size Vishay Intertechnology, Inc. announced that it has expanded its CHA series of AEC-Q200 qualified thin film chip resistors with new devices in the 0402 case size. Available with a wide range of resistance values from 10 O to 500 O, CHA0402 resistors provide high frequency performance up to 50 GHz for automotive, telecom, medical, space, avionics, and military applications. Now available in the 02016 and 0402 case sizes, CHA series devices offer very low internal reactance and exhibit behavior close to a pure resistor over their large frequency range, with a nearly flat Z/R curve to 70 GHz and 50 GHz, respectively. The microwave resistors maintain their high frequency stability even after the most stressful AEC-Q200 tests -- validated by their DR and Z/R measurements -- guaranteeing high performance under harsh environmental conditions. The CHA series is ideal for automotive ADAS, LIDAR, connectivity, and 4D radar systems; LEO satellites and space communication systems; X-ray, MRI, and CAT scan machines; 5G /6G telecommunications equipment, base stations, and repeaters; military guidance and telemetry systems; drones; and RF antennas. For these applications, the CHA0402 resistors provides limiting voltage of 37 V, rated power of 300 mW at +70 degC, and a temperature efficient of +- 100 ppm/degC, with +- 50 ppm/degC available on request. To reduce development time and costs, the devices' S-parameter data is available for electronic simulation, in addition to 3D models for Ansys®? HFSS™?, Modelithics Microwave Global Models™? (PCB and pad-scalable), and design kits. RoHS-compliant, halogen-free, and Vishay Green, the resistors are offered in waffle pack and tape and reel packaging. Samples and production quantities of the CHA0402 resistor are available now, with lead times of 20 weeks. 
