Ankündigung • Apr 24
Parade Technologies, Ltd. Provides Earnings Guidance for the Second Quarter of Fiscal 2026 Parade Technologies, Ltd. provided earnings guidance for the second quarter of fiscal 2026. For the first quarter of fiscal 2026, the company expects revenue of USD 127.0 million ~ USD 141.0 million. Ankündigung • Apr 07
Parade Technologies, Ltd. to Report Q1, 2026 Results on Apr 22, 2026 Parade Technologies, Ltd. announced that they will report Q1, 2026 results at 1:40 PM, Taipei Standard Time on Apr 22, 2026 Ankündigung • Apr 02
Parade Technologies Announces Availability Of PS8651V DP 2.1a/HBR3 1:2 MST Hub Controller Parade Technologies, Ltd. announced the availability of PS8651V DP 2.1a/HBR3 1:2 MST hub controller for automotive, accessories and video display designs that need DP/eDP port expansion. It adds to Parade’s DP MST Hub solutions which include the PS8650 DP 2.1a/UHBR20 1:4 MST hub controller already on the market. The PS8651V is compliant with VESA DisplayPort v2.1a and eDP 1.5 specifications up to HBR3 or 8.1Gbps/lane link rate, up to 4 lanes. It is AEC-Q100 Grade 2 (-40°C to +105°C ambient temperature) qualified for automotive applications. The DP receiver supports MST (Multi-Stream Transport) and SST (Single Stream Transport) modes. The two transmitters each can support DP 2.1a /eDP 1.5 and are capable of MST (Multi-Stream Transport) and SST (Single Stream Transport) modes and single video split of a super frame in SST input mode as well as lane count/link rate conversion. It is VESA DSC 1.2a (Display Stream Compression) decode and compressed video pass-through capable. PS8651V provides flexible port expansion for DP and eDP connections. Its low power design eases thermal design constraints in automotive applications, eliminating the need for a heat sink. The PS865x MST hub family complements Parade’s TC1316V eDP Touch and Tcon Embedded Driver and PS8461V DisplayPort Retimer with 2:1 inputs mux products in automotive infotainment display systems. The PS8651V is mass production ready now. It is available in a 9.5mm x 13.5mm 102-pin QFN package. Ankündigung • Feb 12
Parade Technologies, Ltd. Announces Sampling Availability of eDP 1.5TTED In-Cell Device with Active Stylus Function for Mainstream Notebook Market Parade Technologies, Ltd. announced sampling availability of the TC3410-AS device, the industry's first single-chip Touch with TCON Embedded Driver (TTED) solution with integrated active stylus support for 1920 x 1200 (WUXGA) resolution. This new device drastically reduces the silicon, hardware, sensor costs and logistical complexity associated with adding active stylus capability to existing touchscreen panels. The TC3410-AS device combines Parade's broad portfolio of patented touchscreen technology and market proven eDP TCON, in-cell and high-speed signal technology, to provide excellent picture quality at 120 Hz display with responsive 240 Hz active stylus performance. The TC3410-as leverages Parade's TrueTouch™? patented technology and design expertise, built on the experience of shipping more than one billion touch devices and proven in-cell performance in the notebook market. TC3410-AS builds on the flexibility and production experience of TC3408 and TC3410 to enable customers another feature option to address the touch and pen needs of their products. The TC3410- AS supports asynchronous touch scanning which allows displays to function at variable refresh rates without losing active pen synchronization. Parade has also worked extensively with active stylus industry standards to minimize the touch scanning interval without compromising touch performance. This ensures excellent picture quality by allowing maximum time for source settling. TC3410-AS is footprint compatible with production proven TC3408 and TC34 10 glass designs, which have been widely adopted across common screen sizes by major LCD panel makers in the WUXGA notebook space. This allows panel makers the option to simply replace the TTED device on glass without any other circuit changes in response to various project needs from OEM customers. In addition, TC3410-AS has built in on-chip circuits to support TPMUX-on-glass which enables the connection of the touch sensors required to support up to 16.0" displays without increasing chip complexity. Ankündigung • Nov 12
Parade Technologies, Ltd. Introduces the TC1316V Device Parade Technologies, Ltd. introduced the TC1316V device, the world's first fully integrated AEC-Q100 qualified embedded DisplayPort (eDP) Touch with Tcon Embedded Driver (TTED). This new device targets next-generation automotive cockpit LCD displays requiring high resolution and high refresh rates. The TC1316V combines Parade's broad portfolio of patented touchscreen technology and market proven eDP Tcon, in-cell and high-speed signal technology, to provide excellent picture quality and responsive touch performance. The TC1316V leverages Parade's TrueTouch™? patented technology and design expertise, built on the experience of shipping over one billion touch devices and proven in-cell performance from the consumer notebook market. The device delivers superior EMI suppression, low power consumption and advanced signal processing algorithms to ensure reliable and responsive touch for the automotive cabin. With its eDP interface, the TC1316V extends the single-chip design space for automotive displays from 15.6" 2560x 1440 at 60 Hz display refresh to 18.0" 2880 x 1800 resolution at 120 Hz display refresh. In addition, the TC1316V offers teletext OSD support for emergency icon display and redundant firmware storage for self-recovery in the event the application firmware becomes corrupted. Multiple TC1316V chips can be used to support up to 30" displays with a maximum display resolution of 5760*720. On-chip circuits support TPMUX-on-glass and the high-SNR of the integrated analog front ends (AFEs) ensures excellent touch performance without compromising display quality. The TC1316V paired with Parade's PS865XV family of MST hub devices provides a complete system solution to split a single high-bandwidth eDP stream from the de- serializer to drive multiple cockpit displays. Ankündigung • Oct 29
Parade Technologies, Ltd. Provides Earnings Guidance for the Fourth Quarter of Fiscal 2025 Parade Technologies, Ltd. provided earnings guidance for the fourth quarter of fiscal 2025. For the quarter, the company expects Revenue of USD 123.50 ~136.50 Million. Ankündigung • Oct 15
Parade Technologies, Ltd. to Report Q3, 2025 Results on Oct 29, 2025 Parade Technologies, Ltd. announced that they will report Q3, 2025 results on Oct 29, 2025 Ankündigung • Sep 17
Parade Technologies, Ltd. Announces the Availability of the PS8780 USB4 Version 2 Parade Technologies, Ltd. announced the availability of the PS8780 USB4 Version 2 (USB4v2) Gen 4 /TBT5 /DP 2.1 Alt Mode bi-directional linear redriver for active cable and NB/PC/WS system applications. It is pin compatible with the PS8778 USB4 Gen 3 /TBT4 /DP 2.1 Alt mode bi-directional linear red river. The PS8780 supports USB4v2 up to Gen 4x2 or 2x 40Gbps symmetric and 120Gbps asymmetric modes, TBT5 2x41.25Gbps, and DP 2.1 Alt Mode UHBR20 link rates. It implements USB4, USB 3.2 and DP 2.1a power management including DP 2.1a Advanced Link Power Management (ALPM). Its low power design and Modern Standby support greatly extend battery life for mobile devices and minimize power consumption for active cables. PS8780 comes in a very small package, ideal for cables or space constrained designs. PS8780 enables much longer cable lengths with full USB4v2 performance than 1 meter or 3.3 ft., typical of passive cables on the market. It extends system PCB trace lengths when cascaded with a USB4v2 retimer between the SoC (USB4v2 router) and USB-C/USB4 connector. The PS8780 is sampling. It comes in a 2.8mm x 4.4mm 28-pin QFN Halogen free RoHS package. Ankündigung • Sep 03
Parade Technologies, Ltd. Introduces the Availability of Four New PCIe Gen 6 (64GT/s) Linear Redrivers for Server, Storage and High Performance AI Scale-Up Data Center Cabling Solutions Parade Technologies, Ltd. introduced the availability of four new PCIe Gen 6 (64GT/s) linear redrivers for server, storage and high performance AI scale-up Data Center cabling solutions. With industry leading linearity, the PCIe Gen6 family of redrivers provide programmable EQ boosts up to 18dB, while operating from a single supply. The PS8594/PS8598/PS8596 devices utilize Parade Speed Migration Path (PSMP) methodology - matching the Intel PCIe 6.0 Standard Ball Map - for easier highspeed routing and evaluation and between PCIe retimers and Parade Linear redrivers. Fully compatible with all previous PCIe specifications, the PS859X series is an excellent choice for motherboard, backplane, AIC and cable applications. Ankündigung • Aug 07
Parade Technologies, Ltd. Provides Earnings Guidance for the Third Quarter of Fiscal 2025 Parade Technologies, Ltd. provided earnings guidance for the third quarter of fiscal 2025. For the quarter, the company expects Revenue of USD 140 million ~ USD 154 million. Ankündigung • Jun 12
Parade Technologies, Ltd. Elects Shu-Yu Lee as Independent Director Parade Technologies, Ltd. at its AGM, held on June 11, 2025, approved elected Independent Director: Shu-Yu Lee. Ankündigung • Apr 08
Parade Technologies, Ltd. to Report Q1, 2025 Results on Apr 23, 2025 Parade Technologies, Ltd. announced that they will report Q1, 2025 results on Apr 23, 2025 Ankündigung • Mar 06
Parade Technologies, Ltd., Annual General Meeting, Jun 11, 2025 Parade Technologies, Ltd., Annual General Meeting, Jun 11, 2025. Location: 7 floor no,236, sec.4 shen yih rd., taipei city Taiwan Ankündigung • Feb 14
Parade Technologies, Ltd. Announces Cash Dividend Parade Technologies, Ltd.'s Boards approval of the adjustment of the rate of cash dividend of TWD 7.18806219 per share. Type and monetary amount of original dividend distribution: Cash dividends TWD 570,088,023 (TWD 7.02 per share). 3.Type and monetary amount of dividend distribution after the change: Cash dividends TWD 570,088,023 (TWD 7.18806219 per share). Reason for the change: The cash dividend rate of 1st half of 2024 profits distribution plan is changed due to the change of total issued and outstanding shares of the Company. The Chairman of the Board of Directors of the Company is authorized to adjust the ultimate cash dividend per share based on the total amount of profits resolved to be distributed in Board Meeting on October 30, 2024 (Taiwan Time). Ex-dividend trading date: March 04, 2025. Ex-dividend record date: March 10, 2025. Ankündigung • Feb 05
Parade Technologies, Ltd. Provides Earnings Guidance for the First Quarter of Fiscal 2025 Parade Technologies, Ltd. provided earnings guidance for the first quarter of fiscal 2025. Based on current business outlook, Parade is providing the following guidance for the first quarter of fiscal 2025: Revenue to be USD 121.0 ~USD 134.0 Million and Gross Margin: 42% ~46%. Ankündigung • Jan 15
Parade Technologies, Ltd. to Report Q4, 2024 Results on Feb 05, 2025 Parade Technologies, Ltd. announced that they will report Q4, 2024 results at 1:40 PM, Taipei Standard Time on Feb 05, 2025 Ankündigung • Oct 16
Parade Technologies, Ltd. to Report Q3, 2024 Results on Oct 30, 2024 Parade Technologies, Ltd. announced that they will report Q3, 2024 results on Oct 30, 2024 Ankündigung • Oct 10
Parade Introduces New eDP Tcon Optimized for Hdr Gaming Displays Up to Uhd Resolution Parade Technologies, Ltd. announced a series of new eDP Tcon devices developed for high-performance PC gaming applications. DP826 enables resolution support up to WUXGA 360Hz. DP827 enables resolution support up to WQXGA 240Hz and DP828 enables resolution support up to UHD 144Hz. The DP828 supports UHD (3840x2160) displays up to 144Hz refresh rate and a derivative part number DP828A supports 2880x1800 and 3000x2000 displays up to 180Hz refresh rate. It supports GPU brand-specific variants including Intel IDT (Intelligent Display Technology), LOBF-Link Off Between active Frame, AMD Freesync Premium Pro, Freesync Replay and Freesync Fast Transport as well as Nvidia G-Sync and DDS (Dynamic Display Switching), and it supports 30-bit input and global dimming for DisplayHDR 400 performance. The DP828 provides full eDP 1.5 functionality including Panel Replay (PR) which is the preferred function to use for Panel Self Refresh, Early Transport, and other advanced features. It accepts up to four lanes on the eDP interface with link rates up to 8.1 Gbps (HBR3). The DP826 and DP827 provide an identical feature set, but with high refresh rates and lower display resolution applications. The new DP826, DP827 and DP828 devices offer backward compatibility with eDP 1.4b and earlier eDP Source devices on the market. The new Tcons and source drivers interconnect through the proprietary Parade SIPI™? (Scalable Intra Panel Interface) standard. SIPI provides a low power, low EMI, error-resilient, high-speed interface from the Tcon to source drivers. The new source drivers support bit rates up to 2.8 Gbps per SIPI channel. Availability: Both DP826 and DP8 27 are packaged in 112-ball 5x11mm2 BGA package. Both DP828A and DP828 are packaged in 144-ball 5.5x12mm2 BGA package. Samples are available now. Ankündigung • Sep 05
Parade Technologies, Ltd. Introduces USB4 Dock Controller Parade Technologies, Ltd. introduced the PS9010 USB4 dock controller as the newest member of Parade's USB4 product family. Designed to meet the rising demand for high-speed, multi-protocol connectivity, the PS9010 sets a new standard for USB4 peripheral controllers, offering unprecedented performance, versatility, and power efficiency. The PS9010 is built to optimize the user experience in modern computing environments where high-bandwidth data transfers and display connections are critical. The chip seamlessly integrates support for USB4, Thunderbolt 3, DisplayPort 2.1, and SuperSpeed USB, ensuring compatibility with a wide range of devices and peripherals. Leveraging Parade's USB4 PHY technology, the PS9010 is fully compliant with USB4, USB 3.2, and related USB-IF specifications, as well as VESA's DisplayPort standards. Whether used in docking stations, monitors, or external peripheral devices, this chip ensures smooth and reliable performance across all connection types. Additionally, the PS9010's integrated PCI Express, DisplayPort, and USB 3.2 tunneling functionality provides the ultimate flexibility for complex peripheral setups. With sustainability in mind, Parade has designed the PS9010 to minimize power consumption without sacrificing performance. The PS9010's low power consumption enables end-products to achieve energy-efficient operations, even in high-demand scenarios. The mechanical and thermal design is simplified, as no heatsink is required in typical applications, and the chip's small footprint further increases its possibilities. The launch of the PS9010 USB 4 dock controller marks a significant milestone in Parade's ongoing commitment to advancing connectivity technology. With its high-speed data transfers and seamless multi-protocol support, the PS9010 enables more possibilities with faster communication and better user experience between AI-driven peripheral controllers, such as external GPUs, smart displays, and data-heavy storage solutions. Together with just announced DisplayPort MST hub controller, DisplayPort to HDMI 2.1 protocol converters, and USB 3.2 hub controllers, Parade offers a one-stop shop for USB4 dock solutions. The PS9010 is available in an 8.5mm x 11.5mm 274-ball BGA package and is sampling now. Ankündigung • Aug 28
Parade Technologies, Ltd. Introduces the TC1312V Device Parade Technologies, Ltd. introduced the TC1312V device, its first fully integrated AEC-Q100 qualified touch with Tcon embedded drivers targeting automotive cockpit displays. The TC1312V combines Parade’s broad portfolio of patented touchscreen technology and proven in-cell, display processing and high-speed signal technology, to provide the lowest EMI and lowest latency touch experience for automotive displays. The TC1312V leverages Parade’s TrueTouch™ patented technology portfolio and design experience gained from shipping over 1 billion touch devices. It provides superior EMI suppression, low power, low latency and flawless touch experience across the temperature extremes of the automotive cabin. The TC1312V also provides accurate touch response for a wide range of finger sizes and gloved touches across various materials and thicknesses. Using Active Shielding technology, TC1312V can deliver best-in-class water rejection and wet finger tracking, perfect for reliable touch with surface condensation or even stepping in from the rain. In addition, the TC1312V offers the industry’s only true VRR (Variable Refresh Rate) solution for automotive displays. Touch refresh rate is fully independent from the display refresh rate, giving automotive system designers more options to reduce display power, while keeping the touchscreen highly responsive to user inputs. Multiple TC1312V chips can be cascaded together to support 35” displays with a maximum display resolution of 7680*1260. On-board circuitry supports single-chip TPMUX on glass to offer flexibility in providing excellent touch performance for displays up to 15.6”. The TC1312V paired with Parade’s PS8627V bridge provides a complete display module solution that addresses the protocol conversion (DP/eDP to LVDS), functional safety and display needs of automotive system designs. The TC1312V chip-on-glass (COG) device is compatible with the most common footprint adopted by automotive panel makers. This allows rapid adoption and verification, enabling its benefits to be made quickly available to automotive OEMs. Availability: The TC1312V is sampling now. Ankündigung • Aug 21
Parade Announces Ps8353 DP 2.1A 20Gbps Linear Redriver Parade Technologies, Ltd. announced the availability of the PS8353 DP 2.1a 20Gbps linear redriver, facilitating DP 2.1a reversible or bidirectional active cables and DP/eDP signal conditioning for notebook, desktop PC and tablet designs. PS8353 supports DP 2.1a/eDP up to 4 lanes and UHBR20 20Gbps link rate. It features low power consumption and power management including Modern Standby (approx. 0.5mW) and DP 2.1a Advanced Link Power Management (ALPM). Its low power design minimizes power use in DP 2.1a active cables and greatly extends the battery life of mobile devices. It comes in a very small package, ideal for space constrained designs. PS8353 can greatly extend the cable length for DP 2.1a beyond the typical 1.2m /3.9ft limit for a passive cable, without degrading the full performance. A 2m or longer cable is commonly used to connect a monitor to the desktop system. Parade proprietary signal and orientation detection enables reversible DP active cable and bidirectional system I/O implementations. Ankündigung • Aug 07
Parade Technologies, Ltd. Provides Earnings Guidance for the Third Quarter of Fiscal 2024 Parade Technologies, Ltd. provided earnings guidance for the third quarter of fiscal 2024. For the quarter, the company expects revenue of USD 130 million - USD 144 million. Ankündigung • Aug 06
Parade Technologies, Ltd. Announces PS8833 USB4/TBT4 Retimer Ships in AI PCs with AMD Ryzen™ AI 300 Series Processors Parade Technologies, Ltd. announces PS8833 USB4/TBT4 retimer shipping in AI PCs powered by AMD Ryzen AI 300 Series processors, which feature the new “Zen 5” high performance CPU cores and integrated AI engine for enhanced AI performance. USB4 is becoming ubiquitous on notebook and desktop PCs. The PS8833 USB4/TBT4 retimer is optimized for AMD’s new AI enhanced processor platform. It also allows OEMs to easily upgrade existing platforms from the PS8830 USB3/TBT4 retimer to extend product longevity. The PS8833 is compliant with USB-IF USB4 specification up to Gen 3 or 40Gbps (2x 20Gbps) and Thunderbolt 4 featuring TBT 3.0 up to 41.25Gbps (2x 20.625Gbps). USB4 tunneling of DP 1.4a and USB 3.2, and DP 2.1 alt mode up to UHBR20 are supported. PS8833 features low power consumption in USB4 operation and low power states, greatly extending battery power operations. Customer implementations of AMD Ryzen AI 300 Series processor platform may also include Parade PS8419/PS8219/PS8210 HDMI 2.1 pin compatible retimer/redrivers for enhanced HDMI connectivity, and PS8811 USB3.2 Gen 2 retimer for USB-A connectivity, benefiting from the proven performance and industry leading compatibility.
Availability: PS8833 is in production in two packages: 6.0x6.0mm 105-ball BGA package and 4.7x8.0mm 62-pin QFN package. PS8419A/PS8219/PS8210 are in production in a 46-pin 4.5x6.5mm QFN package. PS8811 is in production in a 36-pin 4.2x4.2mm QFN package. Ankündigung • Aug 01
Parade Technologies, Ltd. Introduces PS8778 USB4 / TBT4 Linear Redriver Parade Technologies, Ltd. announced the availability of the PS8778 USB4 Gen 3 x2 /TBT4 /DP 2.1 Alt Mode linear redriver for NB/PC, mobile workstation and active cable solutions. The PS8778 supports up to USB4 Gen 3 x2 or 2x 20Gbps, TBT4 2x 20.625Gbps, and DP 2.1 UHBR20 Alt Mode. It implements USB4, USB 3.2 and DP 2.1a power management including Modern Standby (<1mW) and DP 2.1a Advanced Link Power Management (ALPM). The low power design greatly extends the battery life of mobile devices as well as minimizing power use in USB4 active cables. PS8778 comes in a very small package, ideal for space constrained designs. PS8778 extends the overall system channel length by providing additional loss compensation when placed between the SoC (USB4 router) and USB4 retimer such as the PS8833, in a cascade configuration. PS8778 also enables USB4 cables much longer than the 0.8 meter or 2.6 feet limit for a USB4 Gen 3 passive cable, without degrading the performance. Availability: The PS8778 is sampling. It comes in a 2.8mm x 4.4mm 28-pin QFN Halogen free RoHS package. Ankündigung • Jul 18
Parade Technologies, Ltd. to Report Q2, 2024 Results on Aug 07, 2024 Parade Technologies, Ltd. announced that they will report Q2, 2024 results on Aug 07, 2024 Ankündigung • Apr 24
Parade Technologies, Ltd. Provides Earnings Guidance for the Second Quarter of Fiscal 2024 Parade Technologies, Ltd. provided earnings guidance for the second quarter of fiscal 2024. For the second quarter, the company expected revenue to be USD 110.0 ~ USD 122.0 Million. Gross Margin to be 42% ~ 46%. Ankündigung • Apr 04
Parade Technologies, Ltd. to Report Q1, 2024 Results on Apr 24, 2024 Parade Technologies, Ltd. announced that they will report Q1, 2024 results on Apr 24, 2024 Ankündigung • Mar 06
Parade Technologies, Ltd., Annual General Meeting, Jun 12, 2024 Parade Technologies, Ltd., Annual General Meeting, Jun 12, 2024. Location: 7F., No. 236, Sec. 4, Xinyi Rd, Xinyi District Taipei City Taiwan Agenda: To consider and approve the 2023 business report; to consider and approve the report by audit committee; to consider and approve the allocation of cash bonuses and director remuneration; to consider and approve the payment of cash dividend; and to consider and approve any other matters. Ankündigung • Feb 22
Parade Technologies, Ltd. Announces Adjustment of the Rate of Cash Dividend of First Half of 2023 Parade Technologies, Ltd. announced the Board's approval of the adjustment of the rate of cash dividend. Type and monetary amount of original dividend distribution: Cash dividends TWD 390,871,071 (TWD 4.82 per share). Type and monetary amount of dividend distribution after the change: Cash dividends TWD 390,871,071 (TWD 4.88981221 per share). Reason for the change: The cash dividend rate of 1st half of 2023 profits distribution plan is changed due to the change of total issued and outstanding shares of the Company. The Chairman of the Board of Directors of the Company is authorized to adjust the ultimate cash dividend per share based on the total amount of profits resolved to be distributed in Board Meeting on November 1, 2023. Ex-dividend record date is March 13, 2024. Ankündigung • Feb 07
Parade Technologies, Ltd. Provides Earnings Guidance for the First Quarter of Fiscal 2024 Parade Technologies, Ltd. provided earnings guidance for the first quarter of fiscal 2024. For the quarter, the company expected revenue to be USD 114.0 million to USD 126.0 million. Ankündigung • Jan 13
Parade Technologies, Ltd. to Report Q4, 2023 Results on Feb 07, 2024 Parade Technologies, Ltd. announced that they will report Q4, 2023 results on Feb 07, 2024 Ankündigung • Dec 06
Parade Technologies, Ltd. Expands DP 2.1 and Hdmi 2.1 Portfolios with Ps8481/Ps8483 DP 2.1 Mux/Retimer & Ps8431 Hdmi 2.1 Parade Technologies, Ltd. announced the availability of the PS8481/PS8481/PS8483 DP 2.1 2:1 retiming MUX/retimer family, and the PS8431 HDMI 2.1 2.1 retiming MUX for commercial and consumer PCs, host systems and peripherals. PS8481 and PS8483 support DisplayPort 2.1 up to UHBR20 20Gbps per lane, delivering up to 80Gbps total bandwidth. The devices are fully compliant with VESA DP 2.1 standard. PS8431, in compliance with HDMI 2.1 specification, features FRL support up to 12Gbps and backward compatibility with TMDS up to 6Gbps. The devices support low power consumption for standby and low power states, greatly extending the battery life of mobile devices and enabling system EnergyStar compliance. The PS8481, PS8483 and PS8431 are sampling now. PS8481 is in 4.4x9.7mm 66-pin QFN, PS8483 in 4x8mm 56-pin QFN and PS8431 in 4.4x9". Ankündigung • Nov 02
Parade Technologies, Ltd. Announces Cash Dividend Plan for the First Half of 2023, Payable on March 29, 2024 Parade Technologies, Ltd. announced cash dividends of TWD 390,871,071 (TWD 4.82 per share) for the first half of 2023. Cash dividend per share to be distributed is based on the number of total issued and outstanding shares on the record date for distribution. Ex-rights (Ex-dividend) date: March 7, 2024. Ex-rights (Ex-dividend) record date: March 13, 2024. Payment date of cash dividend distribution: March 29, 2024. Date of the resolution by the board of directors or shareholders’ meeting, or of the decision by the company: November 1, 2023. Ankündigung • Nov 01
Parade Technologies, Ltd. Provides Earnings Guidance for the Fourth Quarter of 2023 Parade Technologies, Ltd. provided earnings guidance for the fourth quarter of 2023. For the period, the company expects Revenue in he range of USD 110.0 Million to USD 122.0 Million. Ankündigung • Oct 19
Parade Technologies, Ltd. Expands DisplayPort Interface Adaptation for Automotive Grade LVDS Display Panels Parade Technologies, Ltd. announced the availability of its new high-resolution, automotive-grade PS8627V DisplayPort™ to LVDS protocol converter. The PS8627V is used to convert a DisplayPort™ (DP) or eDP™ (Embedded DisplayPort) video transport stream to the LVDS (Low-Voltage Differential Signaling) interface used by automotive-grade display panels or display assemblies. The PS8627V enables ultrawide display up to 7680x1260@60Hz with 30bpp color depth. For comparison, PS8625V, the current DP/eDP to LVDS converter in mass production for top automotive OEM, supports up to 1920x1200 display resolution. The PS8627V features a DP/eDP input of up to 4 lanes and LVDS output of up to 6 ports. Enabling a native DP/eDP connection between an automotive Video Control Unit (VCU) and display assembly can simplify system design and lower implementation cost by eliminating the need for a SERDES (serializer-deserializer) for the audio/video transport channel. The use of DP/eDP as an end-to-end connection between the video source and display also enables higher resolutions and color depths in addition to potential cost savings. The automotive industry is currently following the consumer electronic trend in transitioning from display panels using an LVDS interface to those using eDP. Notebook PCs and high-end tablets have migrated to eDP to enable higher display resolutions and color depth, and to reduce power, cost, and physical bulk. While automotive-grade eDP display panels are slowly becoming available, many automotive-grade LVDS panels of various sizes remain in production. When using an LVDS panel, Parade’s PS8627V provides an eDP input for the display assembly. Most newer SoCs and GPUs provide an output video stream using DP and eDP which enable both reduced interface pin count and full integration of the video interface into the sub-micron chip process. The higher speed data serialization rates also support higher resolutions and even multiple displays. DP and eDP both include automatic channel equalization and link training to accommodate a direct end-to-end physical connection between video source and display over several meters. Automotive-grade eDP panels are just becoming available, and there are SoCs supporting eDP. But there are many automotive qualified LVDS panels already available in various shapes, sizes and resolutions which can be upgraded to the eDP interface using the PS8627V/PS8625V. For a cable connection from the VCU to display assembly this can eliminate the need for additional SERDES chips that implement the proprietary FPD-link® or GMSL® protocols for example. With proper video source and display configurations and cabling, the reach of native eDP can exceed 3 meters. And as with DisplayPort, eDP can support HDCP (High-bandwidth Digital Content Protection), which is supported by the PS8627V and is required for streaming premium content from DVDs and video services such as Netflix®, Hulu® and the like, or to prevent hacking of automotive display content in the interest of driver safety. Availability: The PS8627V is sampling now. The device supports an ambient temperature range of -40° to 105°C and is available in 128-pin and 176-pin LQFP packages. Ankündigung • Oct 17
Parade Technologies, Ltd. to Report Q3, 2023 Results on Nov 01, 2023 Parade Technologies, Ltd. announced that they will report Q3, 2023 results on Nov 01, 2023 Ankündigung • Aug 31
Parade Technologies, Ltd. Introduces Pcie5 Linear Redriver/2X2 Cross Switch Solutions Parade Technologies, Ltd. announced the availability of the PS8580/PS8580V/PS8581 PCIe5 32Gbps linear redriver/2x2 cross switch family. PS8580 and PS8580V integrate a quad-channel unidirectional linear redriver with a 2x2 cross switch while PS8581 features a linear redriver only. PS8580/PS8581 are designed for notebook/desktop PC, server/datacenter and industrial applications while PS8580V supports automotive AEC-Q100 grade 2 requirements. Multiple PS858x devices support x4, x8 or x16 bidirectional link. PS858x family is compliant with PCIe5 specification. The PS858x family features industry's lowest active power - approximately 72mW/channel for 32Gbps operation, and the smallest package/footprint. L1PM power management results in a sub-mW ultra-low standby power. The low power features facilitate high-speed system implementation and greatly extend the battery life of mobile devices. The PS8580 and PS85 80V include a 2x2 cross switch which enables multiple connection topologies. It supports the applications of two RCs (Root Complex) sharing with one EP (End Point), two EPs with one RC, or two RCs with two EPs. This allows OEMs to implement high performance PCIe5 interconnect, storage and graphics systems. One example would be a gaming PC motherboard with dual graphics slots (two EPs) sharing a PCIe5 bus from the CPU (one RC). The PS8580, PS8580V and PS8581 are sampling. They comes in a 2.8mm x 6mm 38-pin QFN Halogen free RoHS package. PS8580 and PS8581 are available in commercial (0 to +70oC) and industrial temperature (-40 to +85oC) versions. PS8580V supports automotive aEC-Q100 grade 2 temperature (-40 to +105oC). Ankündigung • Aug 10
Parade Technologies, Ltd. Announces Adjustment of the Rate of Cash Dividend Parade Technologies, Ltd. announced adjustment of the rate of cash dividend. Type and monetary amount of original dividend distribution: Cash dividends TWD 714,516,044 (TWD 8.80 per share). Type and monetary amount of dividend distribution after the change: Cash dividends TWD 714,516,044 (TWD 8.98120880 per share). Ex-dividend trading date: August 24, 2023. Ex-dividend record date: August 30, 2023. The period of book closure: August 26, 2023~ August 30, 2023. Reason for the change: The cash dividend rate of the 2nd half of 2022 profits distribution plan is changed due to the change of total issued and outstanding shares of the Company. The Chairman of the Board of Directors of the Company is authorized to adjust the ultimate cash dividend per share based on the total amount of profits resolved to be distributed in Board Meeting on April 26, 2023 (Taiwan Time). Ankündigung • Aug 09
Parade Technologies, Ltd. Provides Earnings Guidance for the Third Quarter of 2023 Parade Technologies, Ltd. provided earnings guidance for the third quarter of 2023. The company expects revenue of $107 million to $119 million. Ankündigung • Jul 27
Parade Technologies Demonstrates the Lowest Latencies in the Industry with Its New PS8936 PCIe/CXL Re-Timer Solution Parade Technologies, Ltd. demonstrated the lowest latencies in the industry with its new PS8936 PCIe/CXL re-timer solution. PS8936 retimer chip developed for PCI Express Rev. 5.0 and Compute Express Link (CXL), supporting sixteen bidirectional lanes. In addition to supporting the 32 Gbps data rate offered by the PCI Express 5.0 specification, it also supports all lower data rates, to provide backward compatibility with earlier PCI Express revisions. The PS8936 is the PCI Express Gen 5 retimer addition to Parade's PS8926 and PS8925 PCI Express 4.0 16-lane and 4-lane retimer family currently in production, and the PS8570 PCI Express 4.0 4-channel linear redriver, which is currently sampling. The PS8936 is in full compliance with the PCI Express 5.0 specification and has been successfully tested in multiple OEM systems and PCI Express 5.0 CPU platforms. It is designed for use in enterprise systems including compute servers, accelerators, and data storage, as well as high-performance workstations. Retimers are required to maintain signal integrity in these systems which often include longer PCB traces, connectors, and cables. The doubling of data rate that PCI Express 5.0 offers compared to PCI Express 4.0 only increases the challenge of error-free signal propagation. This is why retimers are an integral part of the PCI Express 5.0 specification and system implementations. Including both adaptive CTLE and DFE equalization allows the PS8936 to compensate for up to 36 dB channel loss at Nyquist frequencies. And, in addition to supporting PCI Express specification-compliant retimer operation for both common and separate (SRIS/SRNS) clocking configurations, PS8936 features a bit-level retiming mode, activated automatically and regardless of link partners, that provides a near-0 latency path for all data transfers. Availability The PS8936 is available in an 8.9mm x 22.8mm 354-ball BGA package and is sampling now, offering support for -40 to +85 deg. ambient temperature range. Ankündigung • Jul 18
Parade Technologies, Ltd. to Report Q2, 2023 Results on Aug 09, 2023 Parade Technologies, Ltd. announced that they will report Q2, 2023 results on Aug 09, 2023 Ankündigung • Jun 16
Parade Technologies, Ltd. Approves Amendments of Restated Articles of Association Parade Technologies, Ltd. approved the amendment of the Company’s Amended and Restated Articles of Association, at the AGM held on June 15, 2023. Ankündigung • May 25
Parade Technologies, Ltd. Introduces 20Gbps USB4/TBT4 & USB 3.2 Type-C Retimers with DisplayPort 2.1 Support Parade Technologies, Ltd. announced the availability of the PS8833 USB4/TBT4/DP 2.1 retimer and PS8836 USB 3.2/DP 2.1 retimers for commercial and consumer PCs, host systems and peripherals. PS8833 features full capabilities of USB4, DisplayPort 2.1 and Thunderbolt 4.0 with 50% reduction in power consumption. Its pin compatibility with PS8830 USB4/TBT4 retimer currently shipping in customer systems, greatly simplifies OEM design for product longevity. PS8836 offers USB 3.2 Gen 2x2 with DP 2.1 and is pin compatible with PS8833. The PS8833 /PS8836 pin compatible solutions allow OEMs to easily offer a full range of USB4 and USB 3.2 product offerings. The PS8833 is fully compliant with USB-IF USB4 specification supporting up to Gen 3x2 (2x 20Gbps) or 40Gbps withalt mode support for TBT4 up to 41.25Gbps (2x 20.625Gbps) and DP 2.1 up to UHBR20. PS8836 supports USB 3.2 Gen 2 x2 and DP 2.1 alt mode up to UHBR20 over USB-C. PS8833 and PS8836 feature very low power consumption for standby and low power states, greatly extending the battery life of mobile devices. PS8833 is sampling now and PS8836 sampling in June. PS8833 is available in 6x6mm 105-ball BGA and 4.7x8.0mm 62-pin QFN packages. PS8836 comes in a 4.7x8. 0mm 62-pin QFN package.