Ankündigung • Jun 30
Almadex Minerals Ltd. Reports Results From First Pass Drill Program At New Hope Copper-Gold Porphyry Exploration Project Almadex Minerals Ltd. has received and interpreted results from the second hole of its two hole, first pass drill program at its wholly owned New Hope copper-gold porphyry exploration project in Arizona, USA. Final assays have been received from the second hole of the first pass drilling program at the New Hope property. The hole, which was collared from the same pad as the first hole of the program, intersected andesite units affected by phyllic alteration and intruded by late diorite bodies to a depth of 483 meters, after which a tourmaline bearing breccia body was encountered until the end of the hole at 926.6 metres. Short zones of mineralisation with trace chalcopyrite were intersected, including 6.00 metres @ 0.15% copper and 156 ppm molybdenum; Magnetics and mapping suggest that the New Hope drilling to date is on the western edge of a 2.5 km x 0.75 km area of mapped phyllic and remnant lithocap porphyry alteration; IP geophysics extended the IP geophysical anomaly 1.95 km to the east of the line where both holes were drilled; All results are currently being compiled in order to plan a potential stage II drill program on the project; Further mapping, sampling and IP geophysics has recently been carried out at the Rattlesnake project. The New Hope project covers a large (2.5 by 0.75 km) area of mapped phyllic and remnant lithocap porphyry alteration. Recent drone-based magnetics suggest that the drilling to date is on the western edge of the alteration zone and a broad magnetics low associated with this alteration zone. The recent IP lines surveyed to the east of the initial line supports this interpretation as the chargeability remains strong and open in this direction. Assay results have been received from the second hole of the now complete first pass, two hole drill program at New Hope. The second hole was collared from the same pad as the first hole and intersected an andesite intruded by late diorite dykes to 483 metres at which point a large breccia body was encountered. The andesite is affected by phyllic, argillic and propylitic alteration with pyrite contents up to 5%, and the diorite by potassic to propylitic alteration. The breccia body is comprised of clasts from a range of largely intrusive lithologies affected by silicification, phyllic and propylitic alteration. The matrix is often silicified with pyrite and abundant tourmaline. Veins of tourmaline and pyrite also crosscut the breccia. Two zones of copper mineralisation with traces of chalcopyrite were intersected: 498.00 to 504.00 m (6.00 m) @ 0.15 % Cu and 156 ppm Mo (fault zone with traces of chalcopyrite, sphalerite and galena) Including 500.00 to 502.00 m (2.00 m) @ 0.34% Cu and 326 ppm Mo 778.00 to 780.00 m (2.00 m) @ 0.14% Cu and 5 ppm Mo (tourmaline bearing breccia) The first hole also intersected andesite porphyry affected by moderate to strong phyllic alteration and zones of quartz veining to 384 meters when, after a zone of faulting and brecciation, propylitic to potassic alteration was encountered. Within the phyllic alteration, pyrite contents were up to an estimated 7%. Quartz veining occurs largely as hairlines with pyrite, with some that resemble the high-level veining seen at surface above the hole, and others with banded textures and fine pyrite. These latter veins are interpreted to be those typically seen in shallowly emplaced porphyry systems, formed by the flashing of high temperature fluids potentially above the level of significant copper mineralisation. The propylitic alteration encountered at depth is associated with pyrite, magnetite and some pyrite-base metal veins with potassic selvages. Anomalous gold was encountered in several short sections of veining within the phyllic altered zone. The two holes confirm the presence of a large porphyry alteration system. Tourmaline bearing breccias are common in porphyry environments and are often a late overprinting feature. The breccia fragments and associated alteration suggest that the drilling to date may be on the periphery of the core to a porphyry system which has not yet been intersected. The presence of copper is encouraging, as is the expansion of the IP anomaly to the east where previous mapping has traced phyllic alteration. Further examination and analysis of the drill core and geophysical survey results will be carried out to prepare for a potential phase II drill program. A pseudo section illustrating the IP anomaly from line 598500 E is attached. The drilling program and core sampling reported were conducted under supervision. Blanks, field duplicates and certified standards were inserted into the sample stream as part of Almaden’s quality assurance and control program. True widths are not possible to calculate at this time for the drill intercepts described, as they occur in zones of complex veining and brecciation. The analyses reported were carried out at ALS Chemex Laboratories of Tucson and North Vancouver using industry standard analytical techniques. For copper and molybdenum, samples are analysed by Inductively Coupled Plasma – Atomic Emission Spectroscopy (“ICP-AES”), with four acid digestion. Samples that return values greater than 10000 g/t copper using this technique are then re-analysed by HF-HNO3-HCLO4 digestion with HCL leach and ICP-AES finish. The IP geophysical survey described was carried out using the Company’s in-house equipment, a 5 kW GDD transmitter and Iris Elrec-6 receivers using a 100 m dipole in a pole-dipole array on 8 levels. Pseudo sections were prepared and the data was inverted using RES2DINV software. Reported Earnings • May 26
First quarter 2026 earnings released: EPS: CA$0.01 (vs CA$0.01 in 1Q 2025) First quarter 2026 results: EPS: CA$0.01 (in line with 1Q 2025). Net income: CA$870.2k (up 39% from 1Q 2025). Over the last 3 years on average, earnings per share has increased by 32% per year but the company’s share price has only increased by 17% per year, which means it is significantly lagging earnings growth. Ankündigung • Apr 29
Almadex Minerals Ltd., Annual General Meeting, Jun 25, 2026 Almadex Minerals Ltd., Annual General Meeting, Jun 25, 2026. Location: british columbia, vancouver Canada New Risk • Apr 26
New major risk - Earnings quality The company has a high level of non-cash earnings. Accrual ratio: 56% This is considered a major risk. Non-cash earnings can arise from many different things. However, if a company consistently has a high level of non-cash earnings, it may be a sign that they are recognizing revenue from customers before the full value of the sales are received as cash or they are not depreciating the value of their assets appropriately. These are practices that inflate earnings, while not providing a similar increase to cash flows. Companies in some select industries naturally have a high level of non-cash earnings and it is not a major concern. However, in the worst case scenario it can be an early sign of performance manipulation by management. Currently, the following risks have been identified for the company: Major Risks High level of non-cash earnings (56% accrual ratio). Revenue is less than US$1m (CA$1.3m revenue, or US$929k). Minor Risks Profit margins are more than 30% lower than last year (63% net profit margin). Market cap is less than US$100m (CA$28.8m market cap, or US$21.1m). Reported Earnings • Apr 26
Full year 2025 earnings released: EPS: CA$0.01 (vs CA$0.033 in FY 2024) Full year 2025 results: EPS: CA$0.01 (down from CA$0.033 in FY 2024). Revenue: CA$1.27m (up CA$1.22m from FY 2024). Net income: CA$806.2k (down 60% from FY 2024). Profit margin: 64% (down from 4,453% in FY 2024). Over the last 3 years on average, earnings per share has fallen by 1% per year but the company’s share price has increased by 10% per year, which means it is well ahead of earnings. Ankündigung • Apr 01
Almadex Minerals Ltd. Provides New Hope Drilling, Big Sky Project and General Exploration Update Almadex Minerals Ltd. discussed the Company’s 2026 exploration program progress. Assays received from the initial hole of the New Hope porphyry copper-gold Project, Arizona, first pass drilling program with phyllic alteration and high level veining encountered to 384 meters. Drilling complete on second hole. Magnetics and mapping suggest that the New Hope drilling to date is on the western edge of a 2.5 km x 0.75 km area of mapped phyllic and remnant lithocap porphyry alteration. Surface sampling at the Big Sky epithermal gold-silver Project, New Mexico, returns further significant results. Induced Polarisation (IP) Geophysical survey to commence at the Rattlesnake porphyry-epithermal Project, Arizona. Drone magnetics completed at the New Hope, King and Rattlesnake Projects. Regional generative exploration program ongoing. The Company has received further rock chip sampling results from the Big Sky epithermal gold-silver Project, New Mexico, as discussed in more detail below. Drone based magnetic surveys have been completed at the Company’s King, New Hope and Rattlesnake porphyry copper-gold prospects. The data is being analysed and compiled with other datasets. An IP geophysical survey will commence shortly at the Rattlesnake Project, Arizona. The New Hope project covers a large (2.5 by 0.75 km) area of mapped phyllic and remnant lithocap porphyry alteration. Recent drone-based magnetics suggest that the drilling to date is on the western edge of the alteration zone and a broad magnetics low associated with this alteration zone. Assay results have been received from the first hole of the current drill program at New Hope. Drilling of a second hole is now complete. The first hole intersected andesite porphyry affected by moderate to strong phyllic alteration and zones of quartz veining to 384 meters when, after a zone of faulting and brecciation, propylitic to potassic alteration was encountered. Within the phyllic alteration, pyrite contents were up to an estimated 7%. Quartz veining occurs largely as hairlines with pyrite, with some that resemble the high level veining seen at surface above the hole, and others with banded textures and fine pyrite. These latter veins are interpreted to be those typically seen in shallowly emplaced porphyry systems, formed by the flashing of high temperature fluids potentially above the level of copper mineralisation. The propylitic alteration encountered at depth is associated with pyrite, magnetite and some pyrite-base metal veins with potassic selvages. Anomalous gold was encountered in several short sections of veining within the phyllic altered zone. While no significant copper mineralisation was encountered, the first hole has confirmed a large porphyry alteration system is present. The second hole of the program is complete and was drilled on the same section as the first. Once assays are received and compiled from the second hole, next steps will be planned. Further induced polarisation (“IP”) geophysics is planned in the near term to explore for chargeability and resistivity responses to the east and northeast of the first two drillholes. The Big Sky high sulphidation epithermal gold-silver project is located in western New Mexico and covers an area of advanced argillic alteration and silicification hosted in rhyolite volcanics and limestone. In 2025 Almadex announced the results from 57 grab rock samples taken from outcrop and subcrop (grab samples are selected samples and may not represent true underlying mineralisation). These preliminary results were very encouraging as 19 of these samples returned over 0.1 g/t gold with 4 returning more than 1 g/t gold (up to 3.5 g/t gold and averaging 0.26 g/t gold for all 57). The better values were returned from zones of brecciation that are part of several parallel silicified ridges that have been identified in the preliminary work. Soil sampling showed elevated gold and epithermal suite elements in proximity to the gold in rock results. Together these results helped define a broad area of prospectivity surrounding the outcrops mapped to date. Further prospecting to the northeast was recently carried out and an additional 87 rock chip samples from outcrop were taken returning up to 1.8 g/t gold and averaging 0.1 for all 87 (ranging from below detection to 1.8 g/t). These new samples expand the area of potential, and the Company is now planning to conduct further IP geophysical surveying to help define drill targets. The Company looks forward to reporting further results from this year’s work plan as it progresses throughout 2026. Ankündigung • Feb 04
Almadex Minerals Ltd. Announces Drilling Underway at the New Hope Copper Porphyry Project, Arizona, USA Almadex Minerals Ltd. announced that drilling has recommenced at the Company's wholly owned New Hope copper-gold Project in Arizona. The first hole of the program is underway once again after it was initially collared in December of 2025 prior to the Christmas break. This first hole is targeting an area of veining mapped at surface that is coincident with an IP chargeability geophysical anomaly identified by the Company in earlier work. Further drilling plans will be made based on the geological observations made in the first hole upon completion. The 958.7 hectare New Hope project is located in southeastern Arizona, near several large porphyry copper deposits currently being mined including Lone Star (approximately 35 kilometres away) and Morenci (approximately 50 kilometres away). The project covers a roughly 3.5 by 1.5 kilometre area of intense hydrothermal alteration developed in volcanic rocks and crosscutting intrusive dykes. The observed hydrothermal alteration is characteristic of the upper levels of a porphyry system. The project was acquired in 2023 by staking and broad scale mapping of the lithocap has been carried out over much of the property. Within the area mapped, exposed advanced argillic alteration was identified to the northeast, and to the southwest an exposed set of porphyry-related veinlets was defined in limonitic alteration. This zone of quartz veining is currently interpreted to represent a potential centre to the porphyry system at New Hope. The observed zone of veining is an approximately 600 metre in diameter semi-circular area. The veins and veinlets are sheeted light to dark black, semi-trans transparent quartz and magnetite with banded textures. fluid inclusion petrography on these veinlets indicate that they were formed by vapour rich fluids. These types of veinlets are interpreted to be typical of shallow-level emplaced porphyry systems and above the level at which main stage porphyry-style copper-gold mineralisation is to be expected. Within this broader area, two inner zones about 200 metres and 100 metres in diameter were mapped where veinlet densities of greater than 10 per metre were observed. Lithocaps are extensive areas of hydrothermally altered rocks that occur above or adjacent to intrusive rocks and related porphyry deposits. The hydrothermal alteration forms when ascending high temperature magmatic fluids are released from the source intrusion below and alter permeable and reactive rocks occurring above. Lithocaps can be over 10 by 10 km in surface area and over 1 km thick. The alteration mineral assemblages vary, usually with distance from the intrusive source. Often more neutral and higher temperature stable alteration mineral assemblages are seen at depth, closer to the source intrusion and potential porphyry deposit. This portfolio is the direct result of many years of prospecting and deal-making by Almadex's management team. Ankündigung • Jan 23
Almadex Minerals Ltd. Discusses Exploration Plans for 2026 Almadex Minerals Ltd. discuss the Company's 2025 exploration program and its plans for 2026. While the Company holds important assets in Canada such as the Logan Zn-Ag project, its current exploration efforts are focussed on precious and base metals in the western USA. A large amount of successful generative work was completed in 2025 resulting in several new early-stage project acquisitions. At the same time the Company's existing exploration project portfolio was significantly advanced. The Company anticipates that 2026 will be a significant year, with first pass drilling programs being planned for several projects within its portfolio. The Company has a full portfolio of exciting recently acquired early-stage projects. Drilling to test this portfolio will commence in 2026; The company focussed on large targets: porphyry copper-gold and epithermal gold-silver systems in the western USA and have developed a proprietary model for seeking magmatism related to these systems; Almadex is well funded to carry out generative and first pass drilling programs on its own projects. 2025 was a transitional year for generative work and non-dilutive growth in working capital. Summary of 2025 Work Program. In 2025, the Company continued its generative exploration efforts resulting in the acquisition of several new epithermal gold-silver and porphyry lithocap exploration projects as well as a project prospective for rare earth elements. Three projects were optioned in 2025 to Azucar. Company's legacy Paradise project which covers a large porphyry lithocap alteration system in Nevada. All data and analysis have been received and completed from the final Paradise drilling program which stopped early due to losing the final drill hole. As previously announced, porphyry alteration was encountered with related brecciation and weak mineralisation, however no firm vectors were th generated from this work. While the Company is considering the next steps for the Paradise project, first pass drilling efforts shifted to the Company's New Hope porphyry prospect in Arizona, where drilling commenced in late 2025 prior to the Christmas break. In 2025, exploration work was conducted on several projects in the portfolio to advance them towards drill permitting. To begin with, drilling is anticipated to recommence in the coming days at the New Hope porphyry prospect In Arizona where mapped veining at surface and an IP chargeability feature has helped define an exciting porphyry target. The Company's initial exploratory drill program began in December 2025. Beyond this New Hope program, the th sequence of drilling and timing are dependent on results, logistics and other factors, and are subject to short notice change. At this time the Company hopes to do drilling and or conduct focussed exploration on the following highlighted projects: Ruby Hill Epithermal Silver-Gold Project, Nevada. The Company has filed a notice to conduct drilling in an area of the project where filing a notice is applicable. Big Sky Epithermal Gold-Silver Project, New Mexico. The Big Sky high sulphidation epithermal gold-silver project is located in western New Mexico and covers an area of advanced argillic alteration and silicification hosted in rhyolite volcanics. In 2025 Almadex announced the results from 57 grab rock samples taken from outcrop and subcrop (grab samples are selected samples and may not represent true underlying mineralisation). Rattlesnake Porphyry-Epithermal Project, Arizona. The Rattlesnake Property is a newly acquired porphyry lithocap project. Advanced argillic alteration has been mapped in volcanics along with zones of crosscutting altered dykes. Stockwork and silver-lead-zinc bearing quartz-calcite veining is associated with the dyke zones while elevated copper is associated with the quartz-alunite altered ribs. On October 9th Almadex discussed in a news release preliminary assay results for rock samples collected on the Property. The results from the preliminary sampling were very encouraging and support the interpretation that the Rattlesnake property represents a preserved porphyry lithocap environment. All statements within it, other than statements within it, other than statement within it, other statements within it, other than Statements within it, the Company is focused on the Company is focused on the current statements within it, the Company is on the Company is considering the Company is considering the Company. The Company is considering the Company's generative exploration efforts. Ankündigung • Dec 16
Almadex Minerals Ltd. Commences Diamond Drilling at the New Hope Copper Porphyry Project, Arizona, USA Almadex Minerals Ltd. announced that it has started a scout exploration drill program at the Company's wholly owned New Hope copper-gold porphyry prospect in Arizona. The initial hole of the program is not expected to be completed before the Christmas break. Further drilling plans will be made based on the geological observations made in the first hole upon completion in the New Year. Ankündigung • Nov 07
Almadex Announces Plans to Drill New Hope Porphyry Project, Arizona and Provides Paradise Drill Program Update Almadex Minerals Ltd. provided an update from its scout drilling program at the Paradise Project Nevada as well as its current drilling plans for the remainder of 2025. Results from the third hole of the Paradise program have been received, however the drilling program has been paused after losing the fourth hole due to poor drilling conditions before the target depth. The Company plans to next move its exploration rig and team to its New Hope porphyry copper-gold project in Arizona where the Company has permitted drill holes to test a zone of porphyry related veining mapped at surface and a nearby IP chargeability anomaly. The Company hopes to conduct a first pass drill program at New Hope, possibly before year end depending on certain logistical matters. As more fully described below, the Company is embarking on systematically drill testing its early-stage portfolio with first pass scout drilling on the projects where drill targets have been defined and permitted. The four hole vectoring drill program was designed to test different parts of the lithocap at Paradise where high temperature alteration, high chargeability and magnetic features have been mapped in previous geophysical, geochemical and geological programs conducted by the Company. All four holes in this 2025 program were planned in different parts of this large (currently mapped at 4.5 by 1.8 km) porphyry lithocap alteration zone. The Company has received results from the third scout hole, drilled in a previously untested part of the property, to the northwest of any previous drilling. This hole intersected propylitic alteration overprinted by zones of phyllic alteration with high pyrite. Several geochemically anomalous zones were intersected including 1.60 metres @ 0.48 g/t gold (from 480.40 to 482.00 metres depth) and 0.50 metres of 0.47 g/t gold (from 468.90 to 469.40 metres depth). Drilling was initiated on the fourth hole of the program however this hole was lost in very difficult drilling conditions and faulting prior to reaching its target depth. The hole was collared in argillic alteration, passed through a fault contact into propylitic alteration and then was lost after entering a zone with of segments of weak to moderate phyllic alteration. The Company has paused drilling work for drill crew breaks and to better plan a follow-up drill program in the future. The fourth hole was designed to target IP geophysics, advanced argillic alteration at surface and the edge of a magnetic anomaly at depth but did not reach the target depth. The Company has also received approval for a potential fifth drill site which would target both high magnetics and chargeability at depth. A suite of samples for petrographic analysis has been assembled. Exploring in the upper, often barren, tops of porphyry systems in the last decade has shown to have revealed large discoveries globally. Almadex's team is focussed on such exploration for buried deposits in the western USA and over three years has assembled this important exploration portfolio of porphyry lithocap altered zones. The Company is financed to conduct first pass drilling and plans to automatically carry out vector type drill programs over each of its projects. These drill programs are designed to test these projects for mineralisation, and as such are discovery oriented. But these scout drilling programs are intended to provide important early-stage three-dimensional geological information and a vector for future drilling on each project as well as prioritise the property portfolio. When all data is received and reviewed for each scout drill program, the Company has been received and reviewed for each scout drilling program, the Company has been completed. Ankündigung • Oct 10
Almadex Minerals Ltd. (TSXV:DEX) acquired 100% interest in Rattlesnake, Arizona Porphyry-Epithermal Project. Almadex Minerals Ltd. (TSXV:DEX) acquired 100% interest in Rattlesnake, Arizona Porphyry-Epithermal Project on October 9, 2025. The project was acquired by staking.
Almadex Minerals Ltd. (TSXV:DEX) complete the acquisition of 100% interest in Rattlesnake, Arizona Porphyry-Epithermal Project on October 9, 2025. Ankündigung • Oct 04
Almadex Minerals Ltd. Announces Resignation of Douglas Mcdonald as Director and Executive Vice President, Effective October 2, 2025 Almadex Minerals Ltd. announced that Douglas McDonald has resigned from all his roles in the Company, including as Director and Executive Vice President, effective October 2, 2025 but will continue in an advisory role to support related succession initiatives and ongoing business activities. Ankündigung • Sep 26
Almadex Minerals Ltd. Provides Paradise Drilling Update and Discusses Davis High Grade Gold and Silver Targets Almadex Minerals Ltd. provided a review of past and current exploration activity at the Davis and Paradise Projects, Nevada. In 2019, Almadex consolidated the Davis-Paradise Valley area by optioning the Davis property from the underlying owners. The Davis claims ad join the Paradise Valley property which had been staked by Almadex. Almadex's team is focussed on such exploration for buried deposits in the western USA and over three years has assembled this important exploration portfolio of porphyry lithocap alteration zones. The Company is financed to conduct first pass drilling and plans to systematically carry out vector type drill programs over each of its projects. These drill programs are designed to test these projects for mineralisation, and as such are discovery oriented. But these scout drilling programs are intended to provide important early-stage three-dimensional geological information and a vector for future drilling on each project as well as prioritize the property portfolio. Such drilling is underway at the Paradise porphyry lithocap project, progress from which is discussed below. A review of some of the targets defined at the Paradise Project and the joining Davis Project is also provided below along with a map showing data discussed in this release from both projects. Paradise Drilling Activities: Almadex has completed the drilling of a third hole at the Paradise porphyry Lithocap exploration target and will shortly commence a fourth hole in this 2025 vectoring drill campaign. All four holes in this 2025 program were planned in different parts of this large (currently mapped at 4.5 by 1.8 km) alteration zone. The program was designed to test different parts of the lithocap where high temperature alteration, high chargeability and magnetic features have been mapped in previous geophysical, geochemical and geological programs conducted by the Company. Subsequently the Company carried out an IP geophysical survey which identified a chargeability feature partially associated with the older metasediments and with high grade grab samples taken from surface reported previously (see Almadex news release of September 22, 2022) including 18.5 and 36.3 g/t gold). The coincident IP anomaly and surface veining make this area a priority for follow up mapping to better understand the IP anomaly and if it relates to the high-grade surface samples. This zone is roughly 540 metres north of where in 2022 Almadex drilled two holes on a section beneath the Davis vein zone and historic mine. Highlights from this drill program included 0.80 metres of 17.1 g/t gold and 10.3 g/t silver, 1.70 metres of 11.8 g/t gold and 68.2 g/t silver and 13.70 metres of 2.3 g/t gold and 24.1 g/t silver in the top hole (DP-22-001) and 2.10 metres of 5.7 g/t gold and 22.3 g/t silver and 6.65 metres of 1.9 g/t gold and 11.9 g/t silver in the deeper hole (DP-22-002; see Almadex news release of July 15, 2022). Roughly three kilometres to the southwest, at the Peppercorn showing chip samples returned 0.4 metres of 1.9 g-t gold and 1330 g/t silver, 0.2 metres of 2.0 g/t gold and 415 g/t silver and a grab sample returned 6.0 g/t goldand 2410 g/t silver. Both these areas and others highlight the multi target nature of this Project. Ankündigung • Sep 19
Almadex Minerals Ltd. Provides Paradise Drilling Update and Regional Exploration Progress Report Almadex Minerals Ltd. provided an update on recent and planned exploration activity. Paradise Drilling of a third hole at the Paradise porphyry lithocap exploration target has commenced and a fourth hole is planned for this 2025 vectoring drill campaign. All four holes in this 2025 program were planned in different parts of this large (currently mapped at 4.5 by 1.8 km) alteration zone. The program has been designed to test different parts of the lithocap where high temperature alteration, high chargeability and magnetic features have been mapped in previous geophysical, geochemical and geological programs conducted by the company. Assays from the first hole in the program have now been received. While there are no significant intervals to report from this hole which hit largely distal propylitic alteration, with some intervals of overprinting phyllic alteration, it provides important information for the vectoring efforts in the Paradise lithocap. When complete results are received and interpreted, the Company will provide an update. Project Level Exploration Activities: The Company has ongoing project level field work programs underway. IP geophysical survey work has recently been completed at the Company's Pilot, Confusion Hills and Red Ring projects. A single test line designed to enhance targeting was completed on each project. All three lines returned chargeability anomalies that help refine the targets already identified. Surface geochemical sampling and mapping at the Bald Valley, White Plains and Red Antler projects are being compiled but anomalous trace elements have been returned from the three projects. The results to date highlight high sulphidation style alteration interpreted to be related to a porphyry lithocap setting at Bald Valley and White Plains while a low sulphidation epithermal vein system has been identified at Red Antler. Further work is underway at Bald Valley, with near term programs planned for White Plains and Red Antler which include IP geophysical test lines allowing for preliminary first pass drill plans to be drawn up for permitting. Lithocaps are extensive areas of hydrothermally altered rocks that occur above or adjacent to intrusive rocks and related porphyry deposits. The hydrothermal alteration forms when ascending high temperature magmatic fluids are released from the source intrusion below and alter permeable and reactive rocks occurring above. Lithocaps can be over 10 by 10 km in surface area and over 1 km thick. The alteration mineral assemblages vary, usually with distance from the intrusive source. Often more neutral and higher temperature stable alteration mineral assemblages are seen at depth, closer to the source intrusion and potential porphyry deposit. More acidic and lower temperature stable assemblages generally occur higher and farther away. Mapping of alteration mineralals and geochemical analysis using soil and rock samples can map these changes in mineralogy. This mapping can then provide a vector towards potential underlying porphyry systems. If large areas of lithocap alteration are well preserved, they can obscure deep unexposed porphyries and other styles of mineralisation. If no mineralisation is present at surface, drilling based on geochemical and alteration vectors aided by geophysical data is the best way to explore for buried deposits. The wholly owned 1,547 hectare Paradise property covers a roughly 4.5 by 1. 8 kilometre area of exposed intense hydrothermal alteration developed in volcanic rocks. This alteration zone which includes quartz-alunite, pyrophyllite and diaspore is typical of high-sulphidation environments forming above porphyry copper-gold systems. The alteration has been mapped by Almadex using a Terraspec infrared spectrometer. This work, using rock chip spectral data points has defined a well-preserved porphyry lithocap with alunite core zones (with increasing Na-composition) haloed by pyrophyllite, dickite then hypogene kaolinite. Surrounding the acid sulphate zones, the company will provide an update. Ankündigung • Sep 04
Almadex Minerals Ltd. Provides Exploration and Drilling Update and Plans for Remainder of 2025 Almadex Minerals Ltd. provided an update on recent and planned exploration activity for the remainder of 2025. As previously announced upon commencement, Almadex has now completed the drilling of two diamond drill holes at its wholly owned porphyry lithocap target on the Paradise Project, Nevada. Drilling of a third hole will commence shortly. Assays are pending from this program. When complete results are received and interpreted the Company will provide an update. Almadex also anticipates that a first pass drilling program on one of the projects optioned by Azucar Minerals upon approval of the agreement by the TSX Venture Exchange. In addition the Company plans to conduct first pass drilling on the porphyry target the Company has developed on its New Hope, Arizona project later in the year. The Company continues to conduct regional generative exploration desktop and field activities. This work has resulted in the acquisition of several new projects in 2025 including the Red Antler, Utah and Ruby Hill, Nevada Epithermal silver-gold projects and a rare earth exploration project in New Mexico. The Company is hopeful that the ongoing work will continue to identify projects of merit for acquisition. Project Level Exploration Activities: The Company has ongoing project level field work programs underway. Recently and in the near term this has or will include field work on the Bald Valley and White River projects, Nevada, Red Antler Project, Utah and Big Sky project, New Mexico. This work is designed to help define drill targets for first pass conceptual drilling. Results will be reported when received and compiled. Lithocaps are extensive areas of hydrothermally altered rocks that occur above or adjacent to intrusive rocks and related porphyry deposits. The hydrothermal alteration forms when ascending high temperature magmatic fluids are released from the source intrusion below and alter permeable and reactive rocks occurring above. Lithocaps can be over 10 by 10 km in surface area and over 1 km thick. The alteration mineral assemblages vary, usually with distance from the intrusive source. Often more neutral and higher temperature stable alteration mineral assemblages are seen at depth, closer to the source intrusion and potential porphyry deposit. More acid and lower temperature stable assemblages generally occur higher and farther away. Mapping of alteration minerals and geochemical analysis using soil and rock samples can map these changes in mineralogy. This mapping can then provide a vector towards potential underlying porphyry systems. If large areas of lithocap alteration are well preserved, they can obscure deep unexposed porphyries and other styles of mineralisation. If no mineralisation is present at surface, drilling based on geochemical and alteration vectors aided by geophysical data is the best way to explore for buried deposits. The wholly owned 1,547 hectare Paradise property covers a roughly 4.5 by 1.8 kilometre area of exposed intense hydrothermal alteration developed in volcanic rocks. This alteration zone which includes quartz-alunite, pyrophyllite and diaspore is typical of high-sulphidation environments forming above porphyry copper-gold systems. The alteration has been mapped by Almadex using a Terraspec infrared spectrometer. This work, using rock chip spectral data points has defined a well preserved porphyry lithocap with alunite core zones (with increasing Na-composition) haloed by pyrophyllite, dickite then hypogene kaolinite. Surrounding the acid sulphate zones are associated with the acid sulphate zones are also associated with the alteration. Ankündigung • Aug 21
Almadex Minerals Ltd. Provides Review of Spences Bridge Gold Belt Projects in Southern British Columbia Almadex Minerals Ltd. provided an overview of its wholly owned Nicoamen and Merit Projects, located within the Spences Bridge Gold Belt in southern British Columbia. The Spences Bridge Gold Belt is a 110 km northwest-trending belt in southern British Columbia, underlain by Cretaceous-aged volcanic rocks of the Spences Bridge Group. These rocks are highly prospective for low-sulphidation epithermal gold-silver mineralization. Although historically underexplored, the belt has gained attention following recent high-grade gold discoveries like Westhaven Gold's Shovelnose Project, making it a focus for renewed exploration activity. To date, approximately CAD 55 million has been invested in exploration at the Shovelnose Property. In a news release dated March 3, 2025, Westhaven announced an updated Preliminary Economic Assessment (PEA) outlining a robust, low-cost, high-margin underground gold mining operation with a rapid payback period and an estimated mine life of 11.1 years. Previous work on the property is documented in a British Columbia Assessment Report filed by Almaden Minerals Ltd., titled "2014 Exploration Drilling Program, Merit Gold Property, British Columbia, Canada", dated May 27, 2015. Key highlights are summarized below. The Merit Property was staked in late 2004 following encouraging results from prospecting and reconnaissance stream sediment, soil, and rock sampling, which led to the discovery of multiple zones of alteration and mineralization, the most prominent being Sullivan Ridge. Sullivan Ridge is characterized by strong silica and carbonate (ankerite) alteration of andesitic breccias and is host to a 1-2 metre wide, north trending, gold-bearing quartz vein zone. A 2005 trenching program across this quartz zone returned anomalous gold values such as 7.24 g/t gold over 1.8 metres, including 15 g/t gold over 0.6 metres. Subsequent work on the property included a 2010 Induced Polarization geophysical survey which identified a number of high contrast resistivity anomalies, including one below Sullivan Ridge, and a 2014 two-hole diamond drill program targeting mineralization below Sullivan Ridge. The drilling program returned narrow intercepts of gold mineralization, including 0.5 metres grading 0.439 g/t Au and 0.49 metres grading 0.246 g/t Au, which provide valuable geological information to guide future exploration. The most recent work on the Property was carried out by Independence Gold Corp. ("IGO") under an option agreement that granted them the right to earn a 60% interest in the Merit Property. Before the agreement was terminated in early 2022, IGO conducted a ground magnetic survey across the entire property, along with geological mapping and rock geochemical sampling. According to IGO's October 8, 2020 news release, sampling of low-sulphidation quartz veins at Sullivan Ridge returned assays of up to 9.5 g/t gold and 341 g/t silver. Ankündigung • Jun 05
Almadex Minerals Ltd. (TSXV:DEX) acquired Ruby Hill Silver-Gold Exploration Project. Almadex Minerals Ltd. (TSXV:DEX) acquired Ruby Hill Silver-Gold Exploration Project on June 4, 2025.
Almadex Minerals Ltd. (TSXV:DEX) completed the acquisition of Ruby Hill Silver-Gold Exploration Project on June 4, 2025. Reported Earnings • May 30
First quarter 2025 earnings released: EPS: CA$0.01 (vs CA$0.006 in 1Q 2024) First quarter 2025 results: EPS: CA$0.01 (up from CA$0.006 in 1Q 2024). Net income: CA$626.4k (up 72% from 1Q 2024). Over the last 3 years on average, the company's share price growth rate has exceeded its earnings growth rate by 107 percentage points per year, which is a significant difference in performance. Ankündigung • May 15
Almadex Minerals Ltd. Provides an Update on Recent Exploration Activity At Its Porphyry lithocap Target on the Paradise Project, Nevada Almadex Minerals Ltd. provided an update on recent exploration activity at its porphyry lithocap target on the Paradise Project, Nevada which has helped vector towards a potential porphyry core. Previous work carried out by Almadex includes extensive mapping, soils and the drilling of two holes on the northwest portion of the lithocap in 2024. These two holes confirmed the presence of porphyry veining but were interpreted to have intercepted a more distal part of the porphyry system. Recent work reported here includes prospecting and detailed mapping within the lithocap alteration zone along with drone based (UAV) magnetics and ground IP surveys. The porphyry lithocap has potential for three styles of mineralisation; high sulphidation gold hosted in quartz-alunite alteration, porphyry related mineralisation underlying and adjacent to the high sulphidation system, and gold-silver in epithermal veins that crosscut both. Almadex is currently designing a 2025 drill program to test for both high sulphidation gold and copper-gold porphyry potential. Almadex currently holds an approved drill permit for drill testing at Paradise. The magnetics survey defined two separate areas of magnetic low responses within the mapped lithocap that is hosted by andesitic country rocks. One of these magnetic low zones is part of an asymmetric signature with an adjacent magnetic high. Five new IP lines were surveyed over the lithocap and covered the newly identified magnetic low features and zones of brecciation. This new IP work identified elevated chargeability coincident with the areas of low magnetic responses. Hydrothermal brecciation, boxwork after sulphides and historic workings were recently identified as part ofussed field mapping near these areas of magnetic low responses. Rock chip sampling results have been compiled from all past work on the Paradise project by Almadex including new sampling. To date 238 grab rock samples have been taken from outcrop, subcrop and float (grab samples are selected samples and may not represent true underlying mineralisation). The results are very encouraging as they averaged 0.35 g/t gold, with 48 of these samples returning over 0.1 g/t gold and 16 returning more than 0.5 g/t gold (up to 23.7 g/t gold). Anomalous copper and molybdenum values have also been returned from different parts of the area of lithocap alteration. Plan maps showing the magnetic anomalies, location of IP lines and recent mapping along with IP sections illustrating the targets are attached to this news release. New Risk • May 15
New major risk - Share price stability The company's share price has been highly volatile over the past 3 months. It is more volatile than 90% of Canadian stocks, typically moving 18% a week. This is considered a major risk. Share price volatility increases the risk of potential losses in the short-term as the stock tends to have larger drops in price more frequently than other stocks. It may also indicate the stock is highly sensitive to market conditions or economic conditions rather than being sensitive to its own business performance, which may also be inconsistent. Currently, the following risks have been identified for the company: Major Risks Share price has been highly volatile over the past 3 months (18% average weekly change). High level of non-cash earnings (47% accrual ratio). Revenue is less than US$1m (CA$45k revenue, or US$32k). Minor Risk Market cap is less than US$100m (CA$16.2m market cap, or US$11.6m). Ankündigung • Apr 29
Almadex Minerals Ltd., Annual General Meeting, Jun 26, 2025 Almadex Minerals Ltd., Annual General Meeting, Jun 26, 2025. Location: british columbia, vancouver Canada Ankündigung • Apr 24
Almadex Minerals Ltd. Defines Large IP Geophysical Anomaly at the New Hope Copper Porphyry Project, Arizona, USA Almadex Minerals Ltd. provided a summary of recent exploration results from the Company's wholly owned New Hope copper porphyry project in Arizona. A focussed one line IP chargeability and resistivity survey was recently carried out. The line was surveyed using the Company's highly experienced in house team and equipment, a 5 kW GDD transmitter and Iris Elrec-6 receivers using a 100 m dipole in a pole-dipole array on 8 levels. Pseudo sections were prepared and the data was inverted using RES2DINV software. The line was surveyed across the approximately 600 metre diameter area where sheeted quartz +/- magnetite veining was previously mapped. This veining has been interpreted to represent the upper portion of a shallowly emplaced and highly preserved porphyry copper system. The results of the geophysical survey outlined an anomaly over 1 kilometre wide defined by elevated chargeability, and coincident with the area of outcropping veins. Almadex is very encouraged by these results which provide further focus for a potential future first pass drilling program to test for a copper porphyry at depth. Almadex has an approved drill permit to conduct first pass drilling on the project. Compiled geophysical, geochemical and geological results will be posted to Almadex's website. Geophysical surveys are not definitive, and the results are still at an early stage of interpretation, with no guarantee of a mineral discovery. This mapping can then provide a vector towards potential underlying porphyry systems. If large areas of lithocap alteration are well preserved, they can obscure deep unexposed porphyries and other styles of mineralisation. If no mineralisation is present at surface, drilling based on geochemical and alteration vectors aided by geophysical data is the best way to explore for buried deposits. Ankündigung • Apr 16
Almadex Provides Exploration Update on Its Confusion Hills and Red Ring Gold Projects, Nevada, Surface Sampling Returns 7.1 G/T Gold Almadex Minerals Ltd. announced that it has received results from surface exploration geological and geophysical work on its wholly owned Confusion Hills and Red Ring projects near Tonopah, Nevada. Both projects cover gold-silver early-stage exploration targets and were acquired by staking. Summaries of the work and results returned to date are as follows. Confusion Hills Epithermal-Porphyry Gold Project: The Confusion Hills high sulphidation Prospect covers a large alteration zone developed in volcanic rocks. To date 107 grab rock samples have been taken from outcrop and subcrop and float (grab samples are selected samples and may not represent true underlying mineralisation). These preliminary results are very encouraging as 6 of these samples returned over 0.1 g/t gold with 3 returning more than 0.5 g/t gold (up to 7.1 g/t gold in a grab sample of subcrop and averaging 1.6 g/t gold for all 6). Mapping in 2024 and 2025 has defined a high sulphidation/porphyry lithocap over an area of 1.6 km x 0.5 km. The lithocap displays complex alteration with central zones of vuggy quartz with alunite and massive pyrophyllite zones. Soil sampling was carried out in 2024 and returned anomalous Au, Mo and Cu with an association of Au within the central zone of alteration and a Mo anomaly on one edge. Recently a two line test IP geophysical survey was conducted which identified a high chargeability feature (interpreted to represent sulphide development) directly beneath the area of quartz alunite alteration and high gold in grab samples at surface. A drone based mag survey has also been conducted to aid with interpretation. The Company has a drill permit in hand to allow first pass drill testing of the target now defined by surface alteration, surface gold rock and soil results and an IP target at depth. The Company plans to conduct first pass drilling on the project in 2025. A plan and section illustrating the target are attached to this release. Red Ring Epithermal-Porphyry Project: The Red Ring prospect covers an area of hydrothermal alteration developed in volcanic rocks adjacent to carbonate rocks. Alteration mapping in 2024 identified a large alteration zone interpreted to be a porphyry lithocap extending 2.8 km NW-SE and by at least 1 km NE-SW. Mapping also defined a very strong surface pyrophyllite footprint of 1 km (NW-SE) by 0.5 km (NE-SW). Preliminary rock sampling returned high values of pathfinder trace elements typically associated with the lithocap alteration identified. Soil sampling conducted in 2024 also highlighted areas of anomalous trace elements indicative of a high sulphidation environment above or near a porphyry system. Further mapping, sampling and a drone based mag survey have recently been carried out. More geological fieldwork, mapping and sampling is necessary in order to better define this large alteration zone to help with future more focussed exploration. This follow up work is planned for 2025. New Risk • Mar 05
New minor risk - Share price stability The company's share price has been volatile over the past 3 months. It is more volatile than 75% of Canadian stocks, typically moving 13% a week. This is considered a minor risk. Share price volatility indicates the stock is highly sensitive to market conditions or economic conditions rather than being sensitive to its own business performance, which may also be inconsistent. It also increases the risk of potential losses in the short term as the stock tends to have larger drops in price more frequently than other stocks. Currently, the following risks have been identified for the company: Major Risks Revenue is less than US$1m (CA$45k revenue, or US$31k). Market cap is less than US$10m (CA$12.2m market cap, or US$8.49m). Minor Risk Share price has been volatile over the past 3 months (13% average weekly change). Board Change • Jan 02
Insufficient new directors No new directors have joined the board in the last 3 years. The company's board is composed of: No new directors. 6 experienced directors. No highly experienced directors. Independent Director Darcy Marud was the last director to join the board, commencing their role in 2021. The company’s insufficient board refreshment is considered a risk according to the Simply Wall St Risk Model. Ankündigung • Dec 03
Almadex Minerals Ltd. Provides Exploration Update, Commences Geophysical Surveys at Pilot and Paradise-Davis Project, Nevada Almadex Minerals Ltd. provided an update on its western USA exploration activities. The Company has completed a planned drill hole at the north end of the Sinter Zone at its Paradise-Davis Project, Nevada. Drilling conditions were challenging as the hole hit an unexpected fault zone. This faulting has clearly moved geologic units at the north end of the trend of epithermal veining. Drilling has ceased for 2024 and further work will be planned after all results have been received and interpreted. The Sinter Zone covers an area of high-level epithermal alteration and veining as described in more detail below. Mapping of alteration and textures on this target has identified features typical of the surficial expression of an epithermal system. At present two geophysical survey lines of induced polarisation (IP) are planned before year end over the sinter target. It is hoped that this work will better define the geology for targeting this large area with further exploration drilling. Exploration work continues on the Company’s portfolio of early-stage copper-gold targets. This includes work on the Pilot copper-gold porphyry target in Nevada where the company has identified porphyry style veining and a soil anomaly defined by elevated gold, copper, molybdenum. Almadex is currently carrying out an IP surface geophysical survey and a drone based magnetic susceptibility survey over the area of alteration, veining and elevated soils. It is anticipated that these geophysical surveys will help define discrete drill targets for a future first pass drill program. Almadex currently has crews in the field working on the ongoing generative exploration program focussing on new gold and copper-gold potential in the western USA. About the Sinter Zone, Paradise-Davis Project: The Sinter Zone is located adjacent and to the north of the porphyry lithocap area and is interpreted to represent a separate hydrothermal system. The Sinter Zone covers an area of subcrop boulders of sinter (surface hotspring silica deposit) material, hydrothermal brecciation and epithermal quartz veining. Old workings, epithermal alteration and veining occur over roughly 3 km along a northeast trend. Past sampling in the sinter zone includes 30 surface samples taken in 2022 that averaged 0.2 g/t gold and 2.2 g/t silver including a 30 cm chip sample of a banded vein crosscutting the sinter which returned 1.2 g/t gold and a grab from a silicified breccia which returned 1.5 g/t gold. Recent mapping and prospecting along this trend have identified banded quartz veins and veinlets along strike and to the south of the Sinter Zone. The scale of the vein system and epithermal alteration is encouraging. The Company has obtained partial assay results from an RC drill program conducted in the area in the early 1990s which indicate some of the holes returned anomalous gold over short intervals which confirms that the epithermal system is gold and silver bearing. Reported Earnings • Nov 20
Third quarter 2024 earnings released: EPS: CA$0.01 (vs CA$0.008 loss in 3Q 2023) Third quarter 2024 results: EPS: CA$0.01 (up from CA$0.008 loss in 3Q 2023). Net income: CA$621.1k (up CA$1.08m from 3Q 2023). Over the last 3 years on average, the company's share price growth rate has exceeded its earnings growth rate by 91 percentage points per year, which is a significant difference in performance. Ankündigung • Nov 15
Almadex Minerals Ltd. Commences Drilling on the Sinter Zone, Paradise-Davis Project, Nevada Almadex Minerals Ltd. announced that it has commenced a diamond drilling program at the Sinter Zone at its Paradise- Davis Project, Nevada. Almadex hopes to drill two holes in the sinter zone before the end of the year. The sinter zone covers an area of high level epithermal alteration and veining. Mapping of alteration and textures on this target has identified features typical of the surficial expression of an epithermal system. The drilling will target feeder veins beneath this alteration. The sinter zone is located adjacent and to the north of the porphyry lithocap area and is interpreted to represent a separate hydrothermal system. The sinter zone covers a area of subcrop boulders of sinter (surface hotspring silica deposit) material, hydrothermal brecciation and epithermal quartz veining. Old workings, epithermal alteration and veined occur over roughly 3 km along a northeast trend. Past sampling in the sinter zone includes 30 surface samples taken in 2022 that averaged 0.2 g/t gold and 2.2 g/t silver including a 30 cm chip sample of a banded vein crosscutting the sinter which returned 1.2 g/t gold. Recent mapping and prospecting along this trend have identified banded quartz veins and veinlets along strike and to the south of the sinter zone. The scale of the vein system and epithermal alteration is encouraging. The Company has obtained partial assay results from an RC drill program conducted in the area in the early 1990s which indicate some of the holes returned anomalous gold over short intervals which confirms that the epithermal system is gold and silver bearing. Morgan J Poliquin, PhD, PEng, the President and CEO of Almadex and a Qualified Person as defined by National Instrument 43-101 ("NI 43-101"), has reviewed and approved the scientific and technical contents of this news release. The analyses reported were carried out at ALS Chemex Laboratories of Reno, Nevada using industry standard analytical techniques. For gold, samples are first analysed by fire assay and atomic absorption spectroscopy ("AAS"). Samples that return values greater than 10 g/t gold using this technique are then re analysed by fire assay but with a gravimetric finish. Silver is first analysed by Inductively Coupled Plasma - Atomic Emission Spectroscopy ("ICP-AES"). Ankündigung • Oct 09
Almadex Minerals Ltd. Provides Update on Its Paradise Project, Nevada Almadex Minerals Ltd. provided an update on the recently completed diamond drilling program at its Paradise Project, Nevada as well as results of recent surface exploration which have enhanced the sinter zone low sulphidation epithermal gold silver vein target on the project. Paradise Drilling Program: Almadex completed a two hole 1,679.65 metre exploratory diamond drilling program on its Paradise Project in Nye County Nevada and complete assay results have now been received. The two drillholes successfully confirmed that the Paradise lithocap is associated with a porphyry system at depth. Both holes intersected advanced argillic alteration hosted by andesite, zones of crosscutting hydrothermal brecciation and narrow porphyry fingers. The advanced argillic alteration includes zones of quartz-pyrophyllite and kaolinite-dickite which have been identified to the bottom of the holes. The narrow porphyry intrusions are associated with sodic-calcic and minor potassic alteration overprinted by advanced argillic alteration. While there are no significant intervals of copper to report, narrow intervals of visible chalcopyrite were seen. The Company is encouraged by these results since they prove that the alteration seen at surface, without any evidence of porphyry veining, is the upper expression of a porphyry system at depth. Having confirmed that the lithocap has porphyry mineralisation associated with it, the Company is considering next steps for how best to vector towards a porphyry centre within the large alteration zone. Sinter Zone Exploration Program: The sinter zone is located adjacent and to the north of the porphyry lithocap area and is interpreted to represent a separate hydrothermal system. The sinter zone covers an area of subcrop boulders of sinter (surface hotspring silica deposit) material, hydrothermal brecciation and epithermal quartz veining. Old workings, epithermal alteration and veining occur over roughly 3 km along a northwest trend. Past sampling in the sinter zone includes 30 surface samples taken in 2022 that averaged 0.2 g/t gold and 2.2 g/t silver including a 30 cm chip sample of a banded vein crosscutting the sinter which returned 1.2 g/t gold and a grab from a silicified breccia which returned 1.5 g/t gold. Recent mapping and prospecting along this trend have identified banded quartz veins and veinlets along strike and to the south of the sinter zone. The scale of the vein system and epithermal alteration is encouraging. During the mapping program samples were taken for analysis. It is hoped that the results when received will help define the best location for some preliminary drill testing of the recently mapped veins, potentially later in 2024. Almadex drilled three holes in one area of the sinter zone in 2022. One passed through a fault and into older rocks, and the other two are now interpreted to not have been well placed for intersecting the vein system. Some data is in the Company’s possession from an RC drill program conducted in the area in the early 1990s. The historic results, while not complete, are encouraging as they indicate some of the holes returned anomalous gold over short intervals which confirms that the epithermal system is gold and silver bearing. Lithocap Alteration Zones: Lithocaps are extensive areas of hydrothermally altered rocks that occur above or adjacent to intrusive rocks and related porphyry deposits. The hydrothermal alteration forms when ascending high temperature magmatic fluids are released from the source intrusion below and alter permeable and reactive rocks occurring above. Lithocaps can be over 10 by 10 km in surface area and over 1 km thick. The alteration mineral assemblages vary, usually with distance from the intrusive source. Often more neutral and higher temperature stable alteration mineral assemblages are seen at depth, closer to the source intrusion and potential porphyry deposit. More acidic and lower temperature stable assemblages generally occur higher and farther away. Mapping of alteration minerals and geochemical analysis using soil and rock samples can map these changes in mineralogy. This mapping can then provide a vector towards potential underlying porphyry systems. If large areas of lithocap alteration are well preserved, they can obscure deep unexposed porphyries and other styles of mineralisation. If no mineralisation is present at surface, drilling based on geochemical and alteration vectors aided by geophysical data is the best way to explore for buried deposits. Ankündigung • Sep 11
Almadex Minerals Ltd. Provides Update on Its Western USA Exploration Program Almadex Minerals Ltd. provided an update on its ongoing exploration programs in the western USA as well as its recently completed diamond drilling program at its Paradise Project, Nevada. Paradise Drilling Program. Almadex has completed a two hole exploratory diamond drilling program on its Paradise Project in Nye County Nevada. Samples have been submitted for analysis and when results have been received and compiled, they will be released. In general, the drilling confirmed the large scale of the porphyry lithocap alteration at Paradise. It is anticipated that a review of the core, along with assay results once received, will provide direction for a possible phase two drilling campaign. Regional Exploration Program, Western USA. Further to Almadex's press release of June 17th, 2024, the Company has been advancing its Western U.S. exploration portfolio. The prospects in the portfolio were acquired by staking and hold potential for either epithermal gold-silver mineralisation, porphyry copper-gold mineralisation or both. Almadex has conducted a considerable amount of field work over the last several months on several of the prospects and has received soil and mapping results from the CH, RR, PilotKT and New Hope prospects and updated mapping from the Radio prospect. These properties cover large areas of hydrothermal alteration typical of porphyry lithocaps and further exploration is planned for the coming months as described below. CH, Nevada. KT, Colorado. The KT Prospect located in Colorado covers an area of intense hydrothermal alteration developed in volcanic rocks cropping out as windows through post mineral basaltic flows. Preliminary mapping has identified silicification and quartz-alunite alteration over a roughly 3 by 3 km area. The Company plans follow-up geologic and alteration mapping to help direct any further exploration programs. Soil geochemical results have been received. These results highlighted a coincident Au-Bi-Mo-Te-Pb anomaly within the high sulphidation alteration zone. Mapping and sampling are planned to follow-up these results in order to develop firm drill targets. New Hope, Arizona. Further to the results discussed in Almadex's news release of April 8th, 2024, additional mapping was undertaken at New Hope which better defined the targets previously defined. The New Hope project covers a large lithocap with local advanced argillic alteration, peripheral argillic-silica alteration, outer propylitic alteration and, most importantly, a zone of porphyry-related veinlets. A new occurrence of veining was found in the mapping which expanded the area of veining to roughly 650 m in diameter. The style of veinlets is banded, sheeted, light to dark grey quartz +- magnetite. The Company is considering further exploration prior to planning a diamond drilling program at New Hope. Reported Earnings • Aug 21
Second quarter 2024 earnings released Second quarter 2024 results: Net loss: CA$81.3k (loss narrowed 94% from 2Q 2023). Over the last 3 years on average, earnings per share has fallen by 54% per year but the company’s share price has only fallen by 1% per year, which means it has not declined as severely as earnings. Ankündigung • Jul 26
Almadex Minerals Ltd. Announces That Drilling Is Underway At the Paradise Project, Nevada Almadex Minerals Ltd. announced that diamond drilling has commenced at the Company's Paradise project in Nevada, USA. The current drill program has been designed to test lithocap targets for potential underlying copper-gold porphyry mineralisation. As described in its news release of February 27th, 2024, Almadex defined a porphyry copper-gold target at Paradise through mapping and soil geochemistry. The company has now completed the first hole and has started a second. Ankündigung • Jun 20
Almadex Minerals Ltd. Provides Update on Three Newly Identified High Sulphidation-Porphyry Cu-Au Prospects in the Western USA Almadex Minerals Ltd. follow up its press release of April 16, 2024 with updates regarding three more of the fourteen prospects it has staked since early 2023 in the U.S. These three prospects are located in central Nevada and Colorado, USA, and are prospective for high sulphidation gold and porphyry copper-gold deposits. The Company is planning initial work programs designed to rapidly provide the exploration dataset to evaluate whether these targets merit drilling in the summer field season of 2024. The Company has only conducted preliminary exploration mapping and sampling to date. RR, Nevada: The RR Prospect covers an area of hydrothermal alteration developed in volcanic rocks adjacent to carbonate rocks. Alteration mapping at RR has identified a large alteration zone interpreted to be a porphyry lithocap extending 2.8 km NW-SE and by at least 1 km NE-SW. Mapping also defined a very strong surface pyrophyllite footprint of 1 km (NW-SE) by 0.5 km (NE-SW). Preliminary rock sampling returned high values for pathfinder trace elements typically associated with the lithocap alteration identified. The Company has recently completed a soil sampling survey at the prospect for which analytical results are pending. Pilot, Nevada: The Pilot prospect in central Nevada covers an area of hydrothermal alteration developed in syn mineral intrusive rocks and sedimentary country rock. Phyllic alteration has been mapped and is characterised by white mica and pyrophyllite alteration. Recent field mapping has also identified several outcrops with evidence of porphyry-style veining. This includes veining interpreted to represent early magnetite, A type, syntaxial B veins and late stage D type quartz-sericite-pyrite veining. A large mapping, rock sampling and grid-based soil sampling program is planned in order to define targets for drilling. KT, Colorado: The KT Prospect located in Colorado covers an area of intense hydrothermal alteration developed in volcanic rocks cropping out as windows through post mineral basaltic flows. Preliminary mapping has identified silicification and quartz-alunite alteration over a roughly 3 by 3 km area. The Company plans follow-up geologic and alteration mapping along with geochemical soil sampling to help direct any further exploration programs. New Risk • Jun 12
New major risk - Market cap size The company's market capitalization is less than US$10m. Market cap: CA$12.8m (US$9.36m) This is considered a major risk. Companies with a small market capitalization are most likely businesses that have not yet released a product to market or are simply a very small company without a wide reach. Either way, risk is elevated with these companies because there is a chance the product may not come to fruition or the company's addressable market or demand may not be as large as expected. In addition, if the company's size is the main factor, it is less likely to have many investors and analysts following it and scrutinizing its performance and outlook. Currently, the following risks have been identified for the company: Major Risks Revenue is less than US$1m (CA$665k revenue, or US$486k). Market cap is less than US$10m (CA$12.8m market cap, or US$9.36m). Reported Earnings • Jun 04
First quarter 2024 earnings released: EPS: CA$0.01 (vs CA$0.004 in 1Q 2023) First quarter 2024 results: EPS: CA$0.01 (up from CA$0.004 in 1Q 2023). Net income: CA$363.3k (up 44% from 1Q 2023). Over the last 3 years on average, earnings per share has fallen by 15% per year but the company’s share price has only fallen by 1% per year, which means it has not declined as severely as earnings. Reported Earnings • Apr 27
Full year 2023 earnings released: CA$0.05 loss per share (vs CA$0.053 profit in FY 2022) Full year 2023 results: CA$0.05 loss per share (down from CA$0.053 profit in FY 2022). Net loss: CA$2.94m (down 192% from profit in FY 2022). Over the last 3 years on average, earnings per share has increased by 19% per year but the company’s share price has fallen by 2% per year, which means it is significantly lagging earnings. Ankündigung • Apr 21
Almadex Minerals Ltd., Annual General Meeting, Jun 26, 2024 Almadex Minerals Ltd., Annual General Meeting, Jun 26, 2024. Ankündigung • Apr 18
Almadex Minerals Ltd Provides Update on Three Epithermal Gold-Silver Prospects in Nevada, USA Almadex Minerals Ltd. provided an update regarding recent mapping and sampling at three of our new prospects, all of which are located in central Nevada, USA and are prospective for epithermal gold-silver deposits. The Company is planning initial work programs designed to rapidly provide the exploration dataset to evaluate whether these targets merit drilling in the summer field season of 2024. The three prospects have only had preliminary exploration mapping and sampling performed on them to date. Confusion Hills: The Confusion Hills Prospect is comprised of 237 lode claims that cover a large hydrothermal alteration zone developed in volcanic rocks. Two styles of alteration were identified in the preliminary geologic mapping that has been undertaken. Argillic alteration is found widespread in volcanic rocks and breccias along with local silicification. In one area, high temperature pyrophyllite and kaolinite were detected which is indicative of a possible porphyry lithocap environment. 14 grab samples of outcrop have been taken to date in the area of silicic and argillic alteration. Results ranged from below detection to 0.182 g/t gold. Significant trace element epithermal pathfinder results were also returned. Detailed prospecting, mapping and sampling is planned for the spring of 2024. County Line: The County Line Prospect is comprised of 191 lode claims. Preliminary mapping has identified two styles of alteration. A small area (200 metres by 150 metres) of high-sulphidation style alteration where hypogene kaolinite, pyrophyllite, dickite and K-alunite occur at the south end of a broader area of silicification, chalcedonic veining and coxcomb veining, which is representative of a low or intermediate sulphidation environment. Subsequent to staking this area, Almadex received information on limited previous exploration work mainly in the southern portion of County Line, including drilling (three drill holes), with no significant results that have been reported to date, however, details on these exploration campaigns and their reach are unclear. Preliminary rock sampling results on the prospect have returned gold values ranging from below detection to 0.116 g/t. The significant values were returned from the southern high sulphidation alteration zone. Detailed mapping, sampling and prospecting is planned for the spring of 2024 to focus on the zones of veining to the northeast of the area of past work. Silverton South Hydrothermal Cell: This prospect is comprised of 50 lode claims which cover an approximately 4 by 2 km area of intense clay alteration with local replacement silicification. A portion of the alteration zone has been mapped using a Terraspec Field spectrometer. In this 1.5 by 0.9 km area, high temperature kaolinite was mapped. Based on the minerals identified, this alteration zone is currently interpreted to represent a steam heated cap to a possible low sulphidation vein system concealed beneath. The new Nevada lexicon for describing steam heated zones is hydrothermal cell. The Silverton South area likely represents such a cell. While no gold results above detection have been returned, the preliminary grab samples of altered rocks taken to date have returned anomalous epithermal pathfinder elements typical of the interpreted level of erosion. Detailed prospecting, mapping and sampling is planned for the spring of 2024 to help define a vector for possible future drilling. Ankündigung • Apr 10
Almadex Minerals Ltd. Provides Summary of Recent Exploration Results from the Company's Wholly Owned New Hope Copper Porphyry Project in Arizona Almadex Minerals Ltd. provided a summary of recent exploration results from the Company's wholly owned New Hope copper porphyry project in Arizona. The 958.7 hectare New Hope project covers a roughly 3.5 by 1.5 kilometre area of intense hydrothermal alteration developed in volcanic rocks and crosscutting intrusive dykes. The observed hydrothermal alteration is characteristic of the upper levels of a porphyry system. The project was acquired in 2023 by staking and broad scale mapping of the lithocap was carried out prior to the more detailed work reported. The results of geologic field work and sampling carried out in December of 2023 have been compiled. Detailed mapping has now been conducted over a portion of the alteration zone in the central area of the project. Previously defined muscovitic (phyllic) alteration to the northwest remains to be mapped in detail. Within the area mapped, exposed advanced argillic alteration was identified to the northeast, and to the southwest an exposed set of porphyry-related veinlets was defined in limonitic alteration. This zone of quartz veining is currently interpreted to represent a potential centre to the porphyry system at New Hope. The observed zone of veining is an approximately 600 metre in diameter semi-circular area. The veins and veinlets are sheeted light to dark grey, semi-translucent quartz and magnetite with banded textures. Fluid inclusion petrography on these veinlets indicate that they were formed by vapour rich fluids. These types of veinlets are interpreted to be typical of shallow-level emplaced porphyry systems and above the level at which main stage porphyry-style copper-gold mineralisation is to be expected. Within this broader area, two inner zones about 200 metres and 100 metres in diameter were mapped where veinlet densities of greater than 10 per metre were observed. To date 78 rock grab samples have been taken on the property from outcrop, subcrop and float in the alteration zone. While the area is weathered and the level of erosion is above that of where main stage porphyry mineralisation would be expected, elevated gold and molybdenum results were returned. Several orientation lines of soil samples were also taken to determine amenability of the area for a more detailed soil sampling program. This included four lines over the area of veining and one line over the area of advanced argillic alteration to the northeast. Anomalous Ag-Mo-Cu-Au and Bi results were returned for these test lines, aiding the interpretation that the mapped zone of veining represents a porphyry centre within the alteration footprint. Almadex plans to continue detailed mapping and further soil sampling to better define the entirety of the lithocap and to develop a complete set of targets for a future exploration drill program. Ankündigung • Feb 23
Almadex Minerals Ltd Samples 0.59% copper and 0.18 g/t gold in Outcrop at Newly-Acquired Porphyry Target in Nevada, USA Almadex Minerals Ltd. announced that, further to its news releases of July 11th and December 14th 2023 describing the identification of new targets, it has acquired by staking a 100% interest in the Radio porphyry copper-molybdenum-gold exploration target in Mineral County Nevada, USA. The Radio project covers a roughly 2.8 by 1.3 kilometre area of hydrothermal alteration developed in volcanic and intrusive rocks and crosscut by mafic intrusive dykes. The observed hydrothermal alteration and zoning is characteristic of porphyry copper systems. To date Almadex has completed a preliminary surface alteration and geologic mapping program along with surface outcrop rock sampling. First pass surface rock chip sampling has returned important values of copper, molybdenum and gold. A total of 32 samples were collected and assayed during this field campaign, including 31 outcrop samples and 1 talus sample. Of 31 outcrop samples, a total of 5 samples returned greater than 0.05% Cu, and up to 0.59% Cu and 0.18 g/t Au, and three samples returned higher than 100 ppm Mo, and up to 276 ppm Mo (Table 1). The base and precious metal values occur within malachite-stained mafic dykes and magnetite veined intrusive rocks. Fluid inclusion petrography was carried out on select samples of vein material. This work confirmed the fluid inclusion signature of a porphyry system with one sample displaying the distinctive characteristics of A-type porphyry veins. The alteration mapping has identified minor zones of pyrophyllite and kaolinite alteration considered representative of an advanced argillic altered zone interpreted to be the remnants of an eroded lithocap. Importantly a 2.8 km phyllic alteration trend was also defined which is characterised by high crystallinity muscovite and paragonite. The phyllic zone is bordered by propylitic chlorite and epidote alteration. These alteration minerals were identified using a Terraspec mineral spectrometer. This interpretation suggests that a potential porphyry deposit could be located at shallow depths from the current surface. New Risk • Jan 26
New major risk - Market cap size The company's market capitalization is less than US$10m. Market cap: CA$13.4m (US$9.97m) This is considered a major risk. Companies with a small market capitalization are most likely businesses that have not yet released a product to market or are simply a very small company without a wide reach. Either way, risk is elevated with these companies because there is a chance the product may not come to fruition or the company's addressable market or demand may not be as large as expected. In addition, if the company's size is the main factor, it is less likely to have many investors and analysts following it and scrutinizing its performance and outlook. Currently, the following risks have been identified for the company: Major Risk Market cap is less than US$10m (CA$13.4m market cap, or US$9.97m). Minor Risks Revenue is less than US$5m (CA$2.2m revenue, or US$1.6m). Revenue is less than US$5m (CA$2.2m revenue, or US$1.6m). Ankündigung • Dec 14
Almadex Minerals Ltd. Provides Exploration Update Almadex Minerals Ltd. provided this update on its generative exploration activities and corporate matters. Exploration Update: Further to its news release of July 11, 2023 describing the identification of new targets, Almadex has acquired by staking eight target areas in Nevada and two in New Mexico. These areas are considered prospective for gold and/or base metal mineralisation. Preliminary field work and sampling have recently been carried out on most of these areas. Once results have been received and compiled further updates on the potential of these new areas will be released. These ten target areas do not include the New Hope copper porphyry project in Arizona which Almadex has elevated to project status. New Hope Porphyry Copper Project, Arizona: Geologic field work has commenced on the Company’s 100% owned New Hope porphyry copper exploration project in Arizona, USA. The 958.7 hectare New Hope project covers a roughly 3.5 by 1.5 kilometre area of intense hydrothermal alteration developed in volcanic rocks and crosscutting intrusive dykes. The observed hydrothermal alteration is characteristic of the upper levels of a porphyry system. The work underway includes geochemical sampling and mapping of the geology and alteration to follow-up work carried out earlier in 2023 which identified remnants of an advanced argillic altered lithocap. The lithocap alteration includes zones with Na-alunite, pyrophyllite and dickite along with a phyllic alteration signature including high crystallinity muscovite at surface, which have been mapped with a Terraspec mineral spectrometer. Fluid inclusion petrography carried out on a vein sample from the New Hope alteration zone identified the presence of vapour rich fluid inclusions with banded distribution in the veinlet. Such veins are commonly found above porphyry systems. This finding helps confirm the target of a buried porphyry at New Hope. The work underway has been designed to help direct a potential exploratory deep drilling program. Reported Earnings • Nov 24
Third quarter 2023 earnings released: CA$0.008 loss per share (vs CA$0.03 profit in 3Q 2022) Third quarter 2023 results: CA$0.008 loss per share (down from CA$0.03 profit in 3Q 2022). Revenue: CA$594.8k (down 78% from 3Q 2022). Net loss: CA$462.0k (down 126% from profit in 3Q 2022). Over the last 3 years on average, earnings per share has increased by 47% per year but the company’s share price has fallen by 9% per year, which means it is significantly lagging earnings. Buying Opportunity • Oct 29
Now 21% undervalued after recent price drop Over the last 90 days, the stock is down 30%. The fair value is estimated to be CA$0.25, however this is not to be taken as a buy recommendation but rather should be used as a guide only. Revenue has grown by 71% over the last 3 years. Meanwhile, the company has become profitable. New Risk • Oct 17
New major risk - Market cap size The company's market capitalization is less than US$10m. Market cap: CA$13.4m (US$9.86m) This is considered a major risk. Companies with a small market capitalization are most likely businesses that have not yet released a product to market or are simply a very small company without a wide reach. Either way, risk is elevated with these companies because there is a chance the product may not come to fruition or the company's addressable market or demand may not be as large as expected. In addition, if the company's size is the main factor, it is less likely to have many investors and analysts following it and scrutinizing its performance and outlook. Currently, the following risks have been identified for the company: Major Risk Market cap is less than US$10m (CA$13.4m market cap, or US$9.86m). Minor Risks Large one-off items impacting financial results. Profit margins are more than 30% lower than last year (20% net profit margin). Revenue is less than US$5m (CA$4.4m revenue, or US$3.2m). Reported Earnings • Aug 20
Second quarter 2023 earnings released: CA$0.02 loss per share (vs CA$0.011 profit in 2Q 2022) Second quarter 2023 results: CA$0.02 loss per share (down from CA$0.011 profit in 2Q 2022). Revenue: CA$496.3k (down 48% from 2Q 2022). Net loss: CA$1.42m (down 315% from profit in 2Q 2022). Over the last 3 years on average, earnings per share has increased by 59% per year but the company’s share price has fallen by 1% per year, which means it is significantly lagging earnings. Reported Earnings • Jun 02
First quarter 2023 earnings released First quarter 2023 results: Revenue: CA$252.2k (down 75% from 1Q 2022). Net income: CA$253.1k (down 50% from 1Q 2022). Over the last 3 years on average, earnings per share has increased by 77% per year but the company’s share price has only increased by 5% per year, which means it is significantly lagging earnings growth. Reported Earnings • Apr 26
Full year 2022 earnings released: EPS: CA$0.06 (vs CA$0.20 in FY 2021) Full year 2022 results: EPS: CA$0.06 (down from CA$0.20 in FY 2021). Revenue: CA$7.46m (up 210% from FY 2021). Net income: CA$3.22m (down 73% from FY 2021). Profit margin: 43% (down from 501% in FY 2021). Over the last 3 years on average, earnings per share has increased by 71% per year but the company’s share price has only increased by 20% per year, which means it is significantly lagging earnings growth. Ankündigung • Feb 08
Au Gold Corp. (TSXV:AUGC) entered into a purchase and sale agreement to acquire the remaining 40% stake in a Ponderosa Gold Project in British Columbia from Almadex Minerals Ltd. (TSXV:DEX) for CAD 0.05 million. Au Gold Corp. (TSXV:AUGC) entered into a purchase and sale agreement to acquire the remaining 40% stake in a Ponderosa Gold Project in British Columbia from Almadex Minerals Ltd. (TSXV:DEX) for CAD 0.05 million on February 7, 2023. As per the terms of the transaction, AUGC shall issue to Almadex a total of 750,000 common shares upon closing and issue 500,000 common shares in the capital of AUGC (the Contingent Shares”) conditional upon the defining of a Mineral Resource on the Ponderosa Gold Project of at least 250,000 ounces of gold. Completion of the Acquisition will bring AUGC to 100% ownership of the Ponderosa Gold Project. The Agreement is subject to the approval of the TSX Venture Exchange. Ankündigung • Jan 27
Almadex Announces Updated Resource Estimate for the Logan Zinc/Silver Project, Yukon Territory, Canada Almadex Minerals Ltd. announce completion of its updated mineral resource estimate (MRE) with respect to the Logan Zinc/Silver project (“Logan”, or the “Project”) located in Yukon Territory, Canada. The Logan Project is located 108 km northwest of Watson Lake in south central Yukon. The Project consists of 156 contiguous quartz mining claims located in the Watson Lake Mining District, covering over 3,200 hectares. The Project is located on the traditional territory of the Ross River Dena Council and Liard First Nation, 38 km north of the Alaska Highway. The Logan deposit consists of fracture and vein hosted zinc-silver mineralization within a granitic intrusion. The Main Zone occurs along an 8,000m long NE-trending fault-related structure. The Main Zone is tabular, dips 70 degrees to the NW, extends for 1,100m along strike, varies from 50m to 150m in width, and has been traced to depths of 275m and remains open. The mineralization is up to 90 metres thick in relatively gentle terrain and minimal overburden, making it potentially attractive for open pit mining. Recent drill core re-analysis indicated potentially economically significant values of the critical metal indium (In), not historically assayed for, averaging 35 parts-per-million (ppm) In and up to 273 ppm In. Indium is integral to solar panel manufacturing and a key input in semiconductors and many materials needed for advanced vehicle manufacturing. Modeling was conducted in the Universal Transverse Mercator (UTM) coordinate space relative to the North American Datum (NAD) 1983, and UTM zone 9N. The mineral resource block model utilized a block size of 6 m (X) x 6 m (Y) x 6 m (Z) to honour the mineralization wireframes. The percentage of the volume of each block below the bare earth surface, below the modeled waste overburden surface and within each mineralization domain was calculated using the 3D geological models and a 3D surface model. For the open pit optimisation, block values were diluted. The MRE is reported as undiluted with an effective date of January 17, 2023. The Logan Property drillhole database consists of 58 drill holes that intersected the interpreted mineralization wireframes. The zinc and silver assays were composited to 2-meter composites lengths and the estimation utilized 2,651 composited samples. A total of 1.2% of the total drilled meters inside the interpreted mineralization wireframes were not sampled, assumed to be waste, and assigned a nominal waste value of half the detection limit of modern assay methods (0.0005% Zn, 0.3429 g/t Ag). Zinc and silver estimation was completed using Ordinary Kriging. The search ellipsoid size used to estimate the Zn and Ag grades was defined by the modelled variograms. Block grade estimation employed locally varying anisotropy, which uses different rotation angles to define the principal directions of the variogram model and search ellipsoid on a per-block basis. Blocks within estimation domains are assigned rotation angles using a modelled 3D mineralization trend surface wireframe, which allows structural complexities to be reproduced in the estimated block model. The number of variogram structures, contributions of each structure, and their ranges are set per estimation domain and do not vary within the estimation domain. A total of 201 bulk density samples are available from the Logan Property drillhole database. APEX personnel performed exploratory data analysis of the bulk density samples available and the density was assigned for each domain in the Logan Property. The density of the deposits ranged from 2.63 g/cm³ to 2.66 g/cm³. The non-mineralized zones were assigned density based on lithological unit. The modeled overburden was assigned a density of 1.8 g/cm³ and the remaining country rock was assigned a density of 2.57 g/cm³. Ankündigung • Jan 19
Almadex Minerals Ltd. Outlines 2023 Exploration Program and Reports Final 2022 Results for the San Pedro Silver-Gold Project, Mexico Almadex Minerals Ltd. discussed its plans for a 2023 exploration program on its 100% owned San Pedro gold-silver project, Jalisco, Mexico. The San Pedro project covers an area of high-sulphidation acid sulphate lithocap alteration (north area) as well as an area of brecciation and sulphide development with elevated base and precious metals on the southern portion of the project. In 2022 the Company drilled four holes, three of which have been reported (holes SP-22-003, 4 and 5). These three holes all intersected broad zones of brecciation and locally significant base and precious metal values. Hole SP-22-003 intersected 4.51 metres of 656.8 g/t silver and 0.03 g/t gold, SP-22-004 intersected 1.3 metres of 846.0 g/t silver and hole SP-22-005 intersected 1.05 metres of 18.65 g/t gold and 20.5 g/t silver. All four holes drilled in 2022 including SP-22-006 reported help with interpreting the shape of the breccia body which appears to have a sub horizontal distribution. Hole SP-22-006 is interpreted to have been drilled underneath the breccia and did not intersect mineralisation and precious metals values. Further surface mapping is planned to confirm and refine this interpretation in order to optimise the next drilling program. The elevated base metals and copper seen in the breccia, along with acid sulphate altered fragments suggests that the breccia and related mineralisation may be a late feature in the lithocap environment. Acid sulphate altered lithocaps have been seen to form above porphyry copper deposits around the world and Almadex interprets the San Pedro project to have potential for both high sulphidation gold mineralisation in the lithocap, late gold-silver mineralisation in the southern breccia and deep copper porphyry potential beneath the lithocap. A more detailed surface mapping and sampling program is planned, and geophysical surveys may be undertaken as well. Once this work is complete Almadex intends to initiate a further round of drilling to test the targets generated. Almadex looks forward to reporting its progress as exploration work proceeds and results are available. About the San Pedro Project: The San Pedro project covers a large area of acid sulphate alteration, including zones previously described as vuggy silica. Recent Terraspec analysis indicates sericitisation superimposed on propylitic alteration in the mineralised zones with acid sulphate alteration occurring at the north end of the project. Elevated base metals and silver have been returned from outcrop sampling and previous soil sampling surveys. Previous RC drilling by past operators, (shown on attached figures) including Cominco, returned anomalous gold, silver and base metals. Including the hole reported here, four holes have now been completed by Almadex in this Phase 2 program, following on the two completed in 2021. The breccia zone intersected in the recent drilling by Almadex is likely to be part of this large high sulphidation system as confirmed by the observation of vuggy silica textures in a breccia fragments. Elevated copper in the form of chalcopyrite may reflect the potential for an underlying porphyry copper system as well. Further interpretation including alteration and fluid inclusion studies will be conducted to help better define additional drilling. The Company plans to recommence drilling when this is complete. About the San Pedro Project: Almadex acquired the San Pedro project by staking. The property comprises approximately 1,000 hectares with multiple targets, located approximately 18 kilometers southeast from Juchitlan, 93 kilometers southwest of Guadalajara and 85km from the Barqueño project (Guachinango) of Agnico-Eagle. Ankündigung • Jan 10
Almadex Minerals Ltd. Intersects 2.9 Metres of 7.45 G/T Gold at the San Pedro Silver-Gold Project, Mexico Almadex Minerals Ltd. announced that it has received results from the third hole drilled in 2022 on its wholly owned San Pedro Project located in Jalisco, Mexico. This hole was drilled roughly 60m away from the pad where previously reported holes SP-22-003 and SP-22-004 were drilled from. Hole SP-22-005 also intersected long intervals of brecciated rock and returned two separate mineralised intersections including: From 1.35 to 3.85 metres of 0.42 g/t gold and 106.5 g/t silver From 141.10 to 144.00 of 7.45 g/t gold and 9.5 g/t silver, Including From 142.25 to 143.30 of 18.65 g/t gold and 20.5 g/t silver. The hole SP-22-05 intersected two zones where disseminated sulphides were observed to be associated with silicification in the matrix of the breccia. Vuggy silica texture was recognised in the breccias. With the information currently available, the breccia body appears to have a subhorizontal distribution. Further surface mapping is planned to confirm and refine this interpretation in order to optimise the next drilling program. The San Pedro project covers a large area of acid sulphate alteration, including zones previously described as vuggy silica. Recent Terraspec analysis indicates sericitisation superimposed on propylitic alteration in the mineralised zones with acid sulphate alteration occurring at the north end of the project. Elevated base metals and silver have been returned from outcrop sampling and previous soil sampling surveys. Previous RC drilling by past operators, including Cominco, returned anomalous gold, silver and base metals. Including the hole reported here, four holes have now been completed by Almadex in this Phase 2 program, following on the two completed in 2021. The breccia zone intersected in the recent drilling by Almadex is likely to be part of this large high sulphidation system as confirmed by the observation of vuggy silica textures in a breccia fragment. Elevated copper in the form of chalcopyrite may reflect the potential for an underlying porphyry copper system as well. Further interpretation including alteration and fluid inclusion studies will be conducted to help better define additional drilling. The Company plans to recommence drilling when this is complete. Ankündigung • Dec 13
Almadex Minerals Ltd. Receives Results from the Second Hole Drilled in 2022 on Its Wholly Owned San Pedro Project Located in Jalisco, Mexico Almadex Minerals Ltd. announce that it has received results from the second hole (SP-22-004) drilled in 2022 on its wholly owned San Pedro Project located in Jalisco, Mexico. This hole was drilled from the same pad as hole SP-22-003 which intersected 4.51 metres of 656.8 g/t silver at the collar. Hole SP-22-003 was drilled with an inclination of -50 degrees, while SP-22-004 was drilled with -75 degrees. Hole SP-22-004 appears to have intersected an old mining excavation from 1.1 to 3.1 meters, which was not apparent on surface and is filled with mud, broken rock and some wooden pieces. Because of poor recovery before and after, only the 1.3 metres from 4.2 to 5.5 metres depth was sampled which returned 846.0 g/t silver. drilling in this part of the property has intersected long intervals of brecciated and altered rock. The current drilling program has been designed to better understand the orientation and distribution of the breccia zone so that further, more focussed drilling can eventually be carried out. The San Pedro project covers a large area of acid sulphate alteration, including zones previously described as vuggy silica. Recent Terraspec analysis indicates sericitisation superposed on propylitic alteration in the mineralised zones with acid sulphate alteration occurring at the north end of the project. Elevated base metals and silver have been returned from outcrop sampling, and previous soil sampling surveys. Previous RC drilling by past operators, including Cominco, returned anomalous gold, silver and base metals. Including the hole reported here, four holes have now been completed by Almadex in this Phase 2 program, following on the two completed in 2021. Ankündigung • Dec 07
Almadex Minerals Ltd. Announces That It Has Intersected Significant Silver Mineralisation in the First Hole (Sp-22-003) Drilled in 2022 on Its Wholly Owned San Pedro Project Located in Jalisco, Mexico Almadex Minerals Ltd. announce that it has intersected significant silver mineralisation in the first hole (SP-22-003) drilled in 2022 on its wholly owned San Pedro Project located in Jalisco, Mexico. This hole intersected long intervals of brecciated rock from the collar. The mineralised zone was encountered close to surface, in the vicinity of historic mine workings at surface. The mineralised breccia units locally contain silicified fragments, found in a sericitic alteration. The San Pedro project covers a large area of acid sulphate alteration, including zones previous described as vuggy silica. Recent Terraspec analysis indicates sericitisation superposed on propylitic alteration in the mineralised zones with acid sulphate alteration occurring at the north end of the project. Elevated base metals and silver have been returned from outcrop sampling, and previous soil sampling surveys. Previous RC drilling by past operators (shown on attached figures) including Cominco returned anomalous gold, silver and base metals. The intersection reported today provides a focus for further exploration on the property. Two additional holes have now been completed subsequent to completing hole SP-22-003, and assays are pending. Drilling is ongoing at present with one drill crew. Reported Earnings • Nov 29
Third quarter 2022 earnings released: EPS: CA$0.03 (vs CA$0.21 in 3Q 2021) Third quarter 2022 results: EPS: CA$0.03 (down from CA$0.21 in 3Q 2021). Revenue: CA$1.51m (up 140% from 3Q 2021). Net income: CA$1.81m (down 86% from 3Q 2021). Over the last 3 years on average, earnings per share has increased by 73% per year but the company’s share price has only increased by 10% per year, which means it is significantly lagging earnings growth. Ankündigung • Nov 23
Almadex Minerals Ltd. Provides Exploration Update Almadex Minerals Ltd. announced that earlier this month it commenced drilling on two projects: Davis/Paradise in Nevada and San Pedro in Mexico. Drilling continues at San Pedro however cold temperatures and snow fall have curtailed drilling at Davis/Paradise after completion of the first hole. The Company’s Nevada based drill has been moved elsewhere for a short end of year contract. It is hoped that drilling can resume at Davis/Paradise early in 2023. Morgan J Poliquin, PhD, P.Eng. a Qualified Person as defined by National Instrument 43-101 (“NI 43-101”) has reviewed and approved the technical contents of this new release. Ankündigung • Nov 02
Almadex Minerals Ltd. to Start Diamond Drilling At Davis/Paradise in Nevada Almadex Minerals Ltd. (Almadex or the Company) announced that it has mobilized a field team for renewed diamond drilling on the Davis/Paradise project, Nevada. Almadex holds the rights to earn 100% of the Davis/Paradise property, which covers multiple targets, and is located approximately eight miles southeast of Gabbs, Nevada and five miles northeast of the Paradise Peak gold mine, which was active from 1984 to 1994. Drilling is planned on several targets, weather permitting, which include the Davis vein, the Turquoise Ridge copper porphyry target and the Sinter Zone target area. The drill hole planned at the Davis vein is to test the continuation of the vein at depth where drilling carried out earlier in 2022 (see Almadex release of July 15, 2022) returned important intervals including 13.70 meters (core length) of 2.3 g/t gold and 24.1 g/t silver. v. Ankündigung • Oct 29
Almadex to Start Drilling At San Pedro Silver-Gold Project, Mexico Almadex Minerals Ltd. announced that it has mobilised an exploration team to its wholly owned San Pedro project in Jalisco, Mexico to commence a follow-up drilling program anticipated to begin in the coming days. The San Pedro project is accessible from Guadalajara, 115 km along a paved highway, followed by 7km on a maintained dirt road. The new drilling will target a recently identified structural trend associated with float rock of vein material, soil anomalies and old mine workings. Surface rock sampling earlier this year on this trend returned significant silver and gold values. Channel sampling along the trend included a 6.8 metre interval that returned 0.02 g/t gold and 137.7 g/t silver and a 4.2 metre interval that returned 3.7 g/t gold and 167.8 g/t silver. A total of 14 grab and chip samples were taken in this specific zone in 2022, averaging 0.6 g/t gold and 179.6 g/t silver. Ankündigung • Sep 23
Almadex Minerals Receives and Compiles Results from Surface Mapping and Sampling of the Davis/Paradise Project in Nevada Conducted in April, May and June of This Year 2022 Almadex Minerals Ltd. announced that it has received and compiled results from surface mapping and sampling of the Davis/Paradise project in Nevada conducted in April, May and June of this year 2022. This more detailed sampling and mapping was focussed on areas identified and sampled in previous work on the project by Almadex and others. Almadex holds the rights to earn 100% of the Davis/Paradise property, which covers multiple targets, and is located approximately eight miles southeast of Gabbs, Nevada and five miles northeast of the Paradise Peak gold mine, which was active from 1984 to 1994 (Figure 1). Follow-up field work is currently underway to further define these zones. Multiple zones of mineralisation have now been identified. Large zones of pervasive hydrothermal alteration have also been defined. The latest exploration activities had two different objectives; general evaluation of known showings and of previous exploration and historic mining areas, and to evaluate the size of the southern lithocap zone based on an alteration characterisation study. Highlights of the results are as follows and shown on the attached target maps: At the western Peppercorn showing surface samples returned 0.4 metres @ 1.9 g/t gold and 1330 g/t silver, 0.2 metres @ 2.0 g/t gold and 415 g/t silver and a grab sample returned 6.0 g/t gold and 2410 g/t silver; At the Davis North Zone, located 540 metres north of the Davis vein zone, three grab samples returned 2.1, 18.5 and 36.3 g/t gold; At the Davidson mine, a chip sample over 0.3 metres returned 54.9 g/t gold and 865 g/t silver, and a 0.2 metre chip sample returned 21.4 g/t gold and 1095 g/t silver; At the Butler mine, a chip sample returned 0.2 metres @ 9.7 g/t gold; At the Twin Shaft showing grab samples returned 38 g/t gold and 261 g/t silver, 9.9 g/t gold and 64.3 g/t silver, 5.2 g/t gold and 122 g/t silver, and 3.5 g/t gold and 35.1 g/t silver. At the southern Gold-Dyke zone mapping has defined a 1.35 kilometre trend of intense high sulphidation alteration with quartz alunite cores surrounded by pyrophyllite and kaolinite-dickite haloes. One of the grab samples in this area returned 8.3 g/t gold; In the Sinter area 30 surface samples were taken averaging 0.2 g/t gold and 2.2 g/t silver including a 30 cm chip sample of a banded vein crosscutting the sinter which returned 1.2 g/t gold and a grab from a silicified breccia which returned 1.5 g/t gold. Ankündigung • Sep 15
Almadex Minerals Ltd. Reports Final Drilling From Second Quarter Drill Program at Davis/Paradise in Nevada Almadex Minerals Ltd. announced the results of drilling from the final three holes of its May/June 2022 drilling program at its Davis/Paradise project in Nevada. Two holes (DP22-003 and 4) were drilled in the sinter target area of the project (Figure 1). The sinter target covers a zone of silicification interpreted to represent an ancient hotspring deposit and paleo water table environment. The hotspring layered silica deposits are locally crosscut by banded epithermal veins which dip to the west and strike roughly N-NE. Two holes were drilled from pads permitted before detailed mapping was conducted in this area. This detailed mapping indicates that the veins may dip away from the drilling, so future drilling is planned to be carried out from pads that can better facilitate holes to drill deep underneath the sinter area and cross cut veins at right angles to the structural measurements made on surface. A summary of results is as follows: DP-22-004 intersected a 2.0 metre interval from 59.50 metres averaging 1.16 g/t gold in a crustiform vein. DP-22-003 intersected a 0.5 metre interval from 269.0 metres that returned 0.32 g/t gold in a banded vein and a 2.0 metre interval from 304.3 averaging 0.19 g/t gold at the bottom of the hole in altered rock and veined volcanic. As noted above, mapping suggests that these holes were not collared optimally to intersect the banded veins mapped on surface in the sinter zone. Both sinter holes were associated with elevated epithermal pathfinder elements, supporting the interpretation that the altered zones and veins intersected are at high levels in the epithermal system that formed them. The final hole DP-22-005 was drilled in the Butler area. This first hole into this area did not intersect veining and returned no values of significance. The attached map shows the location of all drilling completed by Almadex to date. Prior to drilling, a surface prospecting, mapping and sampling program was initiated over this very large multi target project. This work is ongoing and the Company expects to be able to report on results of surface sampling and alteration mapping soon once data has been compiled. Almadex consolidated the Davis/Paradise Valley area during 2019 by optioning from the underlying owners the Davis property, which adjoins the Paradise Valley property which had been staked by Almadex’s predecessor company. The property now comprises 358 claims totalling approximately 2,800 hectares with multiple targets, located approximately eight miles southeast of Gabbs, Nevada and five miles northeast of the Paradise Peak gold mine. Ankündigung • Sep 14
Almadex Reports Successful Site Visit and Sampling Program and Discusses Historic Drilling Results from the Logan Zn/Ag Project in Yukon Territory Almadex Minerals Ltd. announced that a site visit by an independent geological team to the 100% owned Logan Zinc, Silver project has been completed. Also discussed below are early findings of an ongoing compilation of historical exploration data on the Project, which is located on the traditional territory of the Ross River Dena Council and Liard First Nation in the Yukon Territory, Canada. The historic core was identified on site and select intervals have been re-sampled, and a suite of samples for specific gravity (density) determination have been collected to verify the historic drilling results with the aim of producing a current mineral resource estimate in 2022. In total 232 verification samples were collected from representative mineralized intercepts geographically separated across the deposit (including 15% QA/QC duplicate, standard and blank samples) comprising 231 metres of half drill core from three separate holes from the 1986, 1987 and 1998 historical drill campaigns. The Company continues to review the technical information from past work programs in order to plan future exploration programs. The Logan Project is located 108 km northwest of Watson Lake in south central Yukon. The Project consists of 156 contiguous quartz mining claims located in the Watson Lake Mining District, covering over 3,200 hectares. The Project is located on the traditional territory of the Ross River Dena Council and Liard First Nation, 38 km north of the Alaska Highway. Access for past major work programs was facilitated with a 52 km long winter road from the Alaska Highway. In 1987, a 700 m long by 20 m wide gravel airstrip was established on the Property; future use of the airstrip would require surface re-levelling, but small, short runway aircraft may be able to land at this time. The winter road permit was not renewed past 2009 and re-opening the road would require further permitting. Currently, the Project can be accessed via helicopter. According to historic reports, Logan contains a zinc-silver deposit consisting of fracture and vein hosted zinc-silver mineralization within a granitic intrusion. The Main Zone occurs along an 8,000m long NE-trending fault-related structure. The Main Zone is tabular, dips 70 degrees to the NW, extends for 1,100m along strike, varies from 50m to 150m in width, and has been traced to depths of 275m and remains open. The mineralization is up to 90 metres thick in relatively gentle terrain and minimal overburden, making it attractive for open pit mining. Limited historic sampling indicated the presence of tin enrichment associated with the zinc mineralisation. The samples collected will be analysed for a complete suite of elements. Wardrop, a Tetra Tech Company (Tetra Tech) was retained by a former operator to prepare a Technical Report, including an historical mineral resource estimate, on the Logan Property in 2012. The 2012 Tetra Tech Technical Report is treated as a historical mineral resource. A Qualified Person has not done sufficient work to classify the historical estimate as a current mineral resource and Almadex is not treating this historical estimate as current mineral resources. At a 1% zinc cut-off grade, the Logan Main Zone was estimated to contain 42.7 Mt at an average grade of 2.76% zinc and 12.89 ppm silver1,2. Above illustrates the sensitivity of the historical mineral resource estimate to different cut-off grades for a potential open-pit operation scenario with reasonable outlook for economic extraction. The reader is cautioned that the figures provided in the above table, other than those relating to the 1.0% base case cut-off, should not be interpreted as a statement of historical or current mineral resources. Quantities and estimated grades for different cut-off grades are presented for the sole purpose of demonstrating the sensitivity of the historical resource model to the choice of a specific cut-off grade. Reported Earnings • Aug 19
Second quarter 2022 earnings released: EPS: CA$0.011 (vs CA$0.01 loss in 2Q 2021) Second quarter 2022 results: EPS: CA$0.011 (up from CA$0.01 loss in 2Q 2021). Net income: CA$661.9k (up CA$1.25m from 2Q 2021). Over the last 3 years on average, earnings per share has increased by 76% per year but the company’s share price has fallen by 13% per year, which means it is significantly lagging earnings. Ankündigung • Jul 16
Almadex Hits Multiple Veins at the Davis Vein Target Including 1.70 Metres of 11.8 g/t Gold and 68.2 g/t Silver and 13.70 Metres of 2.3 g/t Gold and 24.1 g/t Silver at the Davis/Paradise Project, Nevada Almadex Minerals Ltd. announced that it has received results from the first two of five holes drilled to date at the Davis/Paradise project in Nevada. This drill program has now been paused for assays, and a second phase program is planned for September when the Company drill is expected to return from third party contract work. Almadex holds the rights to earn 100% of the Davis/Paradise property, which covers multiple targets, and is located approximately eight miles southeast of Gabbs, Nevada and five miles northeast of the Paradise Peak gold mine, which was active from 1984 to 1994. Drilling results announced are from the Davis vein zone and help to demonstrate the important widths and grades of the mineralised structure identified previously in historic work and drilling for which the Company has limited information. The two holes were drilled on the same section and indicate that mineralisation continues to depth and should be further explored down dip. Significant core intervals from the first two holes include: Hole DP-22-001 From 62.70 to 63.50 (0.80 metres) at 17.1 g/t gold and 10.3 g/t silver; And From 65.50 to 67.20 (1.70 metres) at 11.8 g/t gold and 68.2 g/t silver; And From 119.00 to 132.70 (13.70 metres) at 2.3 g/t gold and 24.1 g/t silver; Including From 119.50 to 122.90 (3.40 metres) at 3.0 g/t gold and 41.2 g/t silver; And From 130.0 to 130.80 (0.80 metres) at 18.1 g/t gold and 39.4 g/t silver. The other three holes of this phase one program were located on different targets on the northern half of the property. Two holes were drilled in an area of alteration interpreted to represent a sinter and breccia system, extending over 1.5 km in length running parallel to the Davis zone, and the fifth hole targeted another separate vein with historic mine workings in the Northern area called Butler. Outstanding assays from these three remaining holes will be reported once received and analysed. The Southern Paradise portion of the property, where Almadex anticipates a phase two drilling program to be focussed in September, covers high level acid sulphate quartz alunite alteration as well as a zone of phyllic alteration identified by past alteration mapping and a recent Worldview remote sensing study. Recent mapping performed by the Almadex team confirms the presence of multiple generations of porphyric intermediate intrusive with important alteration zones, especially in the historical mining excavations. This new data suggests that the Paradise area represents a large lithocap with potential for both gold-silver high sulphidation mineralisation and porphyry mineralisation at depth, similar to that seen at the adjacent Paradise Peak gold deposit where both styles of mineralisation were observed. Almadex consolidated the Davis/Paradise Valley area during 2019 by optioning from the underlying owners the Davis property, which adjoins the Paradise Valley property which had been staked by Almadex’s predecessor company. The property now comprises 358 claims totaling approximately 2,800 hectares with multiple targets, located approximately eight miles southeast of Gabbs, Nevada and five miles northeast of the Paradise Peak gold mine. Ankündigung • Jun 01
Almadex Minerals Ltd., Annual General Meeting, Jun 28, 2022 Almadex Minerals Ltd., Annual General Meeting, Jun 28, 2022, at 11:30 Pacific Daylight. Location: Suite 210 1333 Johnston Street Vancouver British Columbia Canada Agenda: To receive the Report of the Directors; to receive the financial statements of the Company for its fiscal year ended December 31, 2021 and the report of the Auditors thereon; to appoint Auditors for the ensuing year; to determine the number of directors and to elect directors; to approve the Company's 2022 Rolling Stock Option Plan as described in the accompanying Management Information Circular; and to transact such other business as may properly come before the Meeting and any adjournment or postponement thereof. Reported Earnings • May 29
First quarter 2022 earnings released: EPS: CA$0.01 (vs CA$0.017 loss in 1Q 2021) First quarter 2022 results: EPS: CA$0.01 (up from CA$0.017 loss in 1Q 2021). Net income: CA$503.5k (up CA$1.51m from 1Q 2021). Over the last 3 years on average, earnings per share has increased by 63% per year but the company’s share price has fallen by 6% per year, which means it is significantly lagging earnings. Ankündigung • May 27
Almadex Minerals Ltd. (TSXV:DEX) acquired Logan Zn/Ag Project in Yukon Territory. Almadex Minerals Ltd. (TSXV:DEX) acquired Logan Zn/Ag Project in Yukon Territory on May 26, 2022. Almadex has been able to acquire 100% of the Logan project legally through a bankruptcy receivership.
Almadex Minerals Ltd. (TSXV:DEX) completed the acquisition of Logan Zn/Ag Project in Yukon Territory on May 26, 2022. Ankündigung • May 26
Almadex Minerals Ltd. Commences Diamond Drilling Operations At the Davis/Paradise Project in Nevada Almadex Minerals Ltd. announce that it has commenced diamond drilling operations at the Davis/Paradise project in Nevada. As previously announced, Almadex holds the rights to earn 100% of this property, which covers multiple targets, and is located approximately eight miles southeast of Gabbs, Nevada and five miles northeast of the Paradise Peak gold mine, which was active from 1984 to 1994. Drilling has commenced on the Davis Zone in the northern Davis portion of the property where high level epithermal alteration and veining has been identified. Also in the northern half of the project is an area of alteration interpreted to represent a sinter and breccia system, extending over 1.5 km in length running parallel to the Davis zone. These exposed vein hosted gold-silver zones have seen historic mining and various exploration drill programs. The property was held by USSRAM Exploration from 1979 to around 2004, during which time various exploration and drilling programs were carried out on the property, including eleven drill holes to investigate mineralisation in the historic Davis mine area. While this historic Davis Mine area drilling cannot be verified by the Company, as it was not completed in accordance with NI 43- 101, it provides a clear exploration focus. One of the significant intercepts from this historic drilling program is reported to have returned 40 feet (12.2 metres) of 0.18 oz/t gold (6.2 g/t gold) and 0.62 oz/t silver (21 g/t silver). The drill program underway will initially test the area of this historic drilling. The strike and dip of the Davis vein was interpreted by the historic operators but cannot be verified by the Company at this time so true widths cannot be estimated or confirmed by the Company. The Southern Paradise portion of the property covers high level acid sulphate quartz alunite alteration as well as a zone of phyllic alteration identified by past alteration mapping and a recent WorldView remote sensing study conducted by the Company in 2020 with results received in 2021. This new data suggests that the Paradise area represents a large lithocap with potential for both gold-silver high sulphidation mineralisation and porphyry mineralisation at depth, similar to that seen at the adjacent Paradise Peak gold deposit where both styles of mineralisation were observed. There is evidence of historic drilling on the Paradise property with unknown results. In early 2022 a claim internal to the Almaden claim package was optioned under terms to acquire a 100% interest through a series of payments. Field work conducted in April on the claim mapped an area of strong phyllic alteration associated with several styles of quartz veining with pyrite and chalcopyrite evident, suggesting a porphyry style of mineralisation. Samples were collected for assay and fluid inclusion petrography to confirm this interpretation. The Company plans to conduct first pass drilling on both the high sulphidation and porphyry target areas in the^# current drill program. Ankündigung • May 13
Almadex Minerals Ltd. Provides Update on Its Exploration Program At Davis/Paradise Project in Nevada Almadex Minerals Ltd. provided an update on its exploration program at the Davis/Paradise project in Nevada. As previously announced, Almadex holds the rights to earn 100% of this property, which covers multiple targets, and is located approximately eight miles southeast of Gabbs, Nevada and five miles northeast of the Paradise Peak gold mine, which was active from 1984 to 1994. The Davis/Paradise property is fully permitted for drilling. Geological Fieldwork was carried out in early April to better define hole orientations for a diamond drill program planned for June of this year. The Northern Davis portion of the property covers an area of high-level epithermal alteration and veining, including a zone of brecciation and silicification interpreted to be a surficial breccia and sinter, extending over 1.5 km in length running parallel to the Davis zone. The exposed vein hosted gold-silver zones have seen historic mining and various exploration drill programs. The property was held by USSRAM Exploration from 1979 to around 2004, during which time various exploration and drilling programs were carried out on the property, including eleven drill holes to investigate mineralisation in the historic Davis mine area. While this drilling is historic in nature and was not completed in accordance with NI 43- 101 and therefor cannot be relied upon, it provides a clear exploration focus. One of the significant intercepts from this historic drilling program is reported to have returned 40 feet (12.2 metres) of 0.18 oz/t gold (6.2 g/t gold) and 0.62 oz/t silver (21 g/t silver). The strike and dip of the Davis vein was interpreted by the historic operators but cannot be verified by the Company at this time so true widths cannot be estimated or confirmed by the Company. Part of the upcoming drill program will be at the Davis mine area to follow-up and confirm these historic results with the aim of defining a second phase of drilling. The Company also plans to conduct first pass drilling on the sinter zone to test for underlying vein mineralisation. Recent field work on the sinter zone has identified banded opaline quartz veining up to 3 metres wide which were sampled for analysis. The Southern Paradise portion of the property covers high level acid sulphate quartz alunite alteration as well as a zone of phyllic alteration identified by past alteration mapping and a recent WorldView remote sensing study conducted by the Company in 2020 with results received in 2021. This new data suggests that the Paradise area represents a large lithocap with potential for both gold-silver high sulphidation mineralisation and porphyry mineralisation at depth, similar to that seen at the adjacent Paradise Peak gold deposit where both styles of mineralisation were observed. There is evidence of historic drilling on the Paradise property with unknown results. In early 2022 a claim internal to the Almaden claim package was optioned under terms to acquire a 100% interest through a series of payments. Field work conducted in April on the claim mapped an area of strong phyllic alteration associated with several styles of quartz veining with pyrite and chalcopyrite evident, suggesting a porphyry style of mineralisation. Samples were collected for assay and fluid inclusion petrography to confirm this interpretation. The Company plans to conduct first pass drilling on both the high sulphidation and porphyry target areas in the upcoming drill program. Reported Earnings • Apr 27
Full year 2021 earnings released: EPS: CA$0.20 (vs CA$0.13 loss in FY 2020) Full year 2021 results: EPS: CA$0.20 (up from CA$0.13 loss in FY 2020). Net income: CA$12.0m (up CA$19.6m from FY 2020). Over the last 3 years on average, earnings per share has increased by 45% per year but the company’s share price has only increased by 2% per year, which means it is significantly lagging earnings growth. Ankündigung • Jun 15
Almadex Minerals Ltd. Provides Updates on Elk Project Located Near Merritt, B.C Almadex Minerals Ltd. provided an update on the 2.0% NSR royalty the Company holds on the Elk project (“Elk”, or the “Project”), located near Merritt, B.C. Gold Mountain Mining Corp. (“GMTN”) continues to report significant progress on its drilling, mine planning and permitting work at Elk. On April 14, 2021, GMTN announced results from the down-dip portion of its Phase 1 drill program at Elk. Highlights of the results include the following: SND20-029 intercepted 1.42m averaging 37.00 g/t Au (including 0.42m averaging 124.00 g/t Au), SND20-032 intercepted 1.22m averaging 16.23 g/t Au (including 0.30m averaging 62.20 g/t Au), SND20-032 intercepted 1.30m averaging 7.95 g/t Au (including 0.30m averaging 31.30 g/t Au). On April 22, 2021, GMTN announced additional drill results including: SND20-033 intercepted 1.3m averaging 13.3 g/t Au (including 0.30m averaging 56.5 g/t Au), SND20-033 intercepted 1.3m averaging 4.5 g/t Au (including 0.30m averaging 19.2 g/t Au). On April 30, GMTN announced that it that it received its Notice of Departure ("NoD") authorization allowing GMTN to begin construction and site preparation at Elk under Gold Mountain's existing M-199 mine permit. GMTN noted that the NoD was achieved on-time and adheres to GMTN’s schedule of ore mining and delivery to its ore purchase partner, New Gold Inc., in fourth quarter of 2021. Further information regarding this and related matters is available at GMTN’s press release of April 30, 2021. On May 14, 2021 GMTN updated its resource estimate at Elk, and on May 27, 2021 GMTN announced an updated preliminary economic analysis of the Project, based on the increased Mineral Resource Estimate announced on May 14, 2021, the Ore Purchase Agreement with New Gold Inc. ("New Gold") announced on January 26, 2021 (the "Ore Purchase Agreement") and the Mining Contract with Nhwelmen-Lake LP announced on January 19, 2021 (the "Mining Contract"). On June 8, 2021, GMTN announced that the Ministry of Energy, Mines & Low Carbon Innovation Communications Office had released GMTN’s draft Mine Permit (the "Draft Mine Permit") for review. Once the final Mine Permit is issued, GMTN anticipates beginning its large scale waste rock mining operations through July and August. This will allow GMTN to mine the high-grade 1300 vein for ore delivery in October to its ore purchase partner, New Gold Inc. On June 10, 2021, GMTN provided a construction update, noting that: GMTN had received authorization from the Ministry of Mines to begin construction on April 29th through its NoD; Nhwelmen-Lake has mobilized vehicles and mining equipment to begin construction and road development; Waste rock mining has begun by utilizing a gravel borrow near the corner of Pit 2; and, GMTN is on schedule for ore delivery in October and revenue in November 2021. Reported Earnings • May 29
First quarter 2021 earnings released: CA$0.02 loss per share (vs CA$0.001 loss in 1Q 2020) First quarter 2021 results: Net loss: CA$1.01m (loss widened CA$951.4k from 1Q 2020). Reported Earnings • Apr 24
Full year 2020 earnings released: CA$0.13 loss per share (vs CA$0.02 loss in FY 2019) Full year 2020 results: Net loss: CA$7.57m (loss widened CA$6.48m from FY 2019). Is New 90 Day High Low • Dec 12
New 90-day low: CA$0.26 The company is down 11% from its price of CA$0.28 on 11 September 2020. The Canadian market is up 10.0% over the last 90 days, indicating the company underperformed over that time. It also underperformed the Metals and Mining industry, which is down 10.0% over the same period. Ankündigung • Oct 03
Almadex Minerals Ltd. announced that it expects to receive CAD 1.35 million in funding Almadex Minerals Ltd. (TSXV:DEX) announced a non-brokered private placement of up to 5,400,000 units at a price of CAD 0.25 per unit for gross proceeds of CAD 1,350,000 led by long term shareholders of the company for CAD 1,000,000, on October 2, 2020. Each unit will consist of one common share and one whole non-transferable common share purchase warrant, each whole share purchase warrant entitling the holder to purchase one common share at a price of CAD 0.40 per share for a period of 2 years following the closing of the transaction. Certain insiders of the company may participate in the transaction. The company may pay finders’ fees in connection with the transaction in cash, shares, warrants or combination. The transaction and payment of finders’ fees are subject to regulatory approval. All securities issued pursuant to this transaction will be subject to a four month plus one day hold period in Canada. Ankündigung • Jul 31
Almadex Minerals Ltd. (TSXV:DEX) acquired an additional 79 claims located in Nevada. Almadex Minerals Ltd. (TSXV:DEX) acquired an additional 79 claims located in Nevada subsequently during the quarter.
Almadex Minerals Ltd. (TSXV:DEX) completed the acquisition of an additional 79 claims located in Nevada on subsequently during the quarter. 
